* Change raspberry_pi_sensors state
I think it is great that the codecs of a Raspberry are queried, but a non-existent codec license is not a critical sensor value. What do you think?
* Update linux_raspberrypi.json
* Update linux_raspberrypi.json
Co-authored-by: Tony Murray <murraytony@gmail.com>
* new device os Raisecom Router OS (ROAP)
tried to add that as existing raisecom os but ended in new os, because they use a
new MIB base for Router OS and newer devices.
* add sensors
* Added tv_signal sensor class (TV signal in dBmV (decibells to millivolt))
* Added OS motorola-cm (Motorolla DOCSIS Cable Modem)
* Added OS thomson-cm (Thomson DOCSIS Cable Modem)
* Alcatel-Lucent support part2
* fixing low temp for aos6, mem for aos6 and linkagg for both
* style for aos6.yaml
* style2 for aos6.yaml
* fix style
* fix style
* add test data
My Cisco IP phones were still being auto discovered even when i had autodiscovery.xdp set to false, and it wasn't ignoring them for the auto discovery regex either. This statement had some misplaced Parenthesis. Working now on my install with this fix.
* mempools to modern module
quick hacky hrstorage port
* port ucd-snmp-mib to Mempools
* Populate DB for ucd
Prep for yaml
* initial yaml attempt
* more complex conversions
fixes to YamlDiscovery, make leading $ optional and allow mib::oid format
* walk full tables and skip values
normalize percentages above 100
* handle precent only ones (specify total as 100)
* Move default polling out of YamlMempoolsDiscovery
* fixes
* Update test data hrstorage should be correct.
* perc_warn for hrstorage
* Host Resources, record buffer, cached, and shared
* Host Resources is always better, don't do both HR and UCD
* fix unix, include warning levels
* variable size
* consolidate skip_values
* define mempools schema
* number instead of integer
* more schema refactor
* one more skip_values reference
* throw error for invalid oid translation
aos6
* a* and Cisco
* updated test data
* update almost all hrstorage data files
* b*
* c* with test data
use standard cache for hrStorage
* use cache for storage module too
* hand bsnmp properly
* bdcom
* exclude total oid from yaml so it is not polled
May add a way to ignore this behavior and poll it, but I don't know if that is needed.
* automatically handle percent only values
* ciscowlc
* only poll used or free if we have used, free, and total.
* fix skipping
* the dlinkoning
fix find value when value "name" is numeric
* support numeric oids
* dnos/ftos attempt
* I guess we can't filter on total > 0
* edgecos
* e*
* f WIP
* f*
* gwd (aka g*)
* h* + procurve
* i*
* j*
* m*
* support 0% used memory (however unlikely)
* n*
* CISCO-PROCESS-MIB memory, share cache with processors module
* ignore mempools with invalid total
* p*
* quanta
* r*
fix raisecom mibs terribly broken
* s-z
* style fixes
* Move VRP back to PHP and make it actually work
* fix zynos
* update schema
* Update Cisco processor data for description bug fixes
* fix comware processors
* comware mempools with memory size
default precision to 1
* sophos-xg updated data
* hrstorage use ram size for buffers, cache, and shared
* Show memory available instead of free in device overview
* UCD, use same rrd format, store available instead of free in the db.
* Calculate availability for HOST-RESOURCES-MIB
* Convert UCD to standard polling
* rename old rrd files
* initial graph work
* graph WIP
* Graph looking decent
* Graph looking decent for hr
* remove old ucd_graph code
* handle availability mempool
more graph cleanup
* color adjustments
* remove accidental free calculation
* Update test data and fix corner cases
* fis pfsense
* update schema
* add default value for mempool_class
* fix whitespace
* update schema
* update schema correctly
* one more time
* fortigate_1500d-sensors missing oids
* Update docs.
* fix indent
* add implements MempoolsDiscovery explicitly to OS
* remove ucd_memory graph references
remove unused device_memory graph
* remove unused functions
* set devices with mempools to rediscover to prevent/minimize gaps
* use a subquery
* add overview graph
* port health mempools table
* Update device mempool
* only show overview if multiple
* Don't override user set warn percentages in discovery
* fix missed usage
* fix style
* Safety check to not rename rrd files incorrectly if migration has not been run.
* Fix overview percent bar and represent available and used on the bar
* missed an item to convert to mempool_class
* percent on the wrong side
* New device named bti800
Support new device for model bti sa-805
* Create bti800.yaml
* Create BTI8xx-MIB
* Create BTI8xx-SYSTEM-MIB
* Create BTI8xx-TC-MIB
* Create BTI8xx-INTERFACE-MIB
* Create BTI8xx-SFP-MIB
* Create bti800.inc.php
* Create bti800.inc.php
* Create bti800.inc.php
* Create bti800.snmprec
* Create bti800.json
* OS icon for BTI800
* Update bti800.yaml
Change mib folder name 'bti800' to 'bti'.
* Rename mibs/bti800/BTI8xx-MIB to mibs/bti/BTI8xx-MIB
Change directory named 'bti800' to 'bti'.
* Rename mibs/bti800/BTI8xx-INTERFACE-MIB to mibs/bti/BTI8xx-INTERFACE-MIB
Change directory named from 'bti800' to 'bti'
* Rename mibs/bti800/BTI8xx-SFP-MIB to mibs/bti/BTI8xx-SFP-MIB
Change directory named 'bti800' to 'bti'.
* Rename mibs/bti800/BTI8xx-SYSTEM-MIB to mibs/bti/BTI8xx-SYSTEM-MIB
Change directory named 'bti800' to 'bti'.
* Rename mibs/bti800/BTI8xx-TC-MIB to mibs/bti/BTI8xx-TC-MIB
Change directory named 'bti800' to 'bti'.
* Create bti800.yaml
Added system temperature and transceiver temperature for BTI800.
* Delete bti800.inc.php
System temperature and transceiver temperature code convert to yaml file locate at /includes/definitions/discovery/bti800.yaml
* Update bti800.inc.php
Add missing code at line 20.
* Update bti800.inc.php
* Update bti800.yaml
* Delete bti.svg
* Replace bti.svg to bti.png
* Update bti800.snmprec
* Update bti800.json
* Update bti800.json
* Update bti800.json
* Update bti800.yaml
* Update bti800.inc.php
Change call for each current Tx and Rx value by using pre_cache() function instead using snmp_get() function for each value to return.
* Rittal CMC III: Add device support for PU and PU Compact
* Rittal CMC III: Readd accidentally removed sysObjectID
* Rittal CMC III: Some small fixes
* Rittal CMC III: Use device serial number instead of the internal device id for state index naming
- version, hardware and serial is now read via yaml
- update test files
* Rittal CMC III: Check if the serial number is available
* Rittal CMC III: Update test data
* Rittal CMC III: Update unset
* Rittal CMC III: Remove space in yaml
* Adding Fortigate HA checks
* Fixed issues the linter had
* Moving sync checks to the poller since standalone units was marked as unsynchronized
* Whitespace lint corrections
* More whitespace linting fixes
* Removing haState since it only showed the state of one device in the cluster.
* Adding a third state fo sync where it will show a warning if a device that is part of a cluster does not have a peer
* Updating snmp test data for fortigate 1500d
* Changing numerical oids to names
* Restoring the original 1500d json file
* Adding cleaned test data
* Removing tags to see if that makes Travis happier
* Removing duplicate rows in SNMP data
* Take this Travis!
* Pretty please Travis?
* Fourth time's a charm?
* snmpwalk_cache_oid handle multiline strings
* remove useless function
* some output has no space after equals
* airos-af-ltu use hr processors
* don't try to append with empty strings
* fix changed test data due to fix
* revert smartax
* better regex
additional check
* split siteboss 530 and 550 into multiple OS
* add more sensors to siteboss550 and new Percent sensor
* fix contact closure event state values
* split os polling for siteboss to siteboss530 and siteboss550
* add test unit for siteboss550, rename test unit for siteboss to siteboss530
* refactor siteboss os polling to \Librenms\OS
* implement OSPolling to Sitebos550
* force save in pollOS() to keep custom sysName during polling
* updated unit test
* update device graphs
* remove pollOS and extra save()
* siteboss550 no longer extends OSPolling
* update siteboss550 test data
* update discoverOS() to match recent os discovery changes
* styleCI changes
* fix siteboss hardware discovery; add check to OS polling if os_group .inc file exists
* collapse siteboss to single OS, implement siteboss sensors in advanced discovery
* add siteboss unit tests
* removed unneeded OS disco defs
* styleCI changes
* more styleCI changes
* split siteboss os to siteboss530 and siteboss550
* split siteboss os to siteboss530 and siteboss550
* move php polling back into yaml
* keep original siteboss OS name
* resave snmp data for siteboss OS
* resave snmp data for siteboss550 OS
* All os detection now uses Yaml
Move OS detection code into the Core module.
Defer all OS with snmp queries.
Add snmpwalk option.
Port ubnt and mobileiron to yaml.
* Silly ide refactor
* UBNT AF LTU: Fix incorrect eth0 status during discovery
* UBNT AF LTU: Update test data
* UBNT AF LTU: Remove eth0 if afLTUethConnected is not set
* UBNT AF LTU: Use require instead of require_once
* IFOTEC new product integration
* change source code indentation
* change source code for code climate checking
* change source code for code climate checking
* deletion of an unnecessary line
* add ifotec.php and test units
* forgetting about the previous commit
* modifications of test units
* add a test units
* optimization and add test units
* change SMNP mode request
* source code cleanup and and file for test units
* update .snmprec file
* update json test file
* update json test file
* IFOTEC mib integration
* add IFOTEC mib files
* IFOTEC mib integration for sensors
* cancel $oid2 unset
* delete useless line
* Fixed Ubiquiti Airfiber LTU retrieval
* Fixed Rx/Tx modulation rate
* Fixed eth0 retrieval
* Fixed quality retrieval
* Fixed Tx/Rx rate
* Fixed distance retrieval
* Added Rx power chain0
* Added Rx power chain1
* Removed eth0 port status
* Removed duplicate Tx EIRP
* UBNT AF LTU: Remove the now useless eth0 port status sensor
eth0 is now logged by the port module, so we don't need a separate state sensor to log the status of the port.
This change was mentioned in the previous commit, but I forgot to include it...
* UBNT AF LTU: Updated test data
* UBNT AF LTU: Fix incorrect spaces
* UBNT AF LTU: Use getnext
* UBNT AF LTU: Add some type checks and fixes
* UBNT AF LTU: Passing sensor values to WirelessSensor calls
* UBNT AF LTU: Cast sensor value to int
* Revert changes made to the test data
* UBNT AF LTU: Add new test data
* UBNT AF LTU: Add discoverWirelessQuality function for quality discovery
* UBNT AF LTU: Use snmpwalk_cache_oid
* UBNT AF LTU: Remove blank line at start of control structure
* UBNT AF LTU: Fix RX Ideal Power Chain 1
* UBNT AF LTU: Fix distance sensor
* UBNT AF LTU: Update CPU usage OID
* UBNT AF LTU: Update test json
* UBNT AF LTU: Update test json 1.4.0
* Arista EOS: Added groups and better sensor names
* Changed few sensors naming to remove redundancy
* Test files
* Better naming v2
* More rewriting and grouping
* And more grouping/rewritting
* Update arista_eos_vrf.json
* Minor code format fix
Co-authored-by: Tony Murray <murraytony@gmail.com>
* removing $graphs global
* remove unused things
* fix some additional graphs
* Fix graphs persisting too soon
* correct name for poller module performance graph
* only one type of graph is used here
* Update cisco-pw.inc.php
To correct Interface names that use escaped '/' e.g. GigabitEthernet0_4_0_12
and translate the underscore back to a slash - e.g. GigabitEthernet0/4/0/12
* Update cisco-pw.inc.php
* Update cisco-pw.inc.php
* Update cisco-pw.inc.php
* Update cisco-pw.inc.php
* modifies find_device_id
* Removed host name validation check for RFC. Some devices and OS allow you
to set a name that contains characters that are prohibited by the RFC.
Such devices can be added using their IP address, their sysName will be
written to the database. If the device is already in the database, then it
should be possible to find it, even if the name is unacceptable according
to RFC requirements.
* Additional search options for sysName have been added using the default
domain. This was needed to improve LLDP detection - a short name was used in
the PDU, and the full name with the domain was stored in the sysName field
in the database.
* modifies find_device_id
* reordering checks
* handling situations with duplicate sysName
* modifies find_device_id (fix style errors)
