* Migrate ironware sensor discovery from php to yaml.
* More sensors, add grouping.
* dynamic_discovery_get_value() becomes getValueFromData()
* Target a specific index with skip_values.
* Improve Brocade BGP session discovery/polling
This commit allows for the correct discovery of BGP sessions
with 32-bit ASNs, IPv6 neighbors using the BGP4V2-MIB which is
based on draft-ietf-idr-bgp4-mibv2-11 and also polls for IPv4
unicast received routes through the FOUNDRY-SN-BGP4-GROUP-MIB.
Copied most of the code from PR#8877 by @Mikeburke14, cleaned
up the code a little bit to match the normal LibreNMS style,
and fixed bgpPeers_cbgp discovery as well as polling for the
ipv4.unicast neighbors.
Note that older Brocade IronWare firmware versions are known
to have multiple defects relating to the BGP4V2-MIB which
might result in certain missing non-established neighbors.
Related vendor defect numbers:
- DEFECT000633962
-- Symptom: The OID bgp4V2PeerAdminStatus does not return the
correct value
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00g
- DEFECT000583319
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display all the BGP entries
-- Reported: NI 05.6.00
-- Resolved: NI 05.8.00e
- DEFECT000550309
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display the full information
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00c
* Add ironware CER & ICX platform test data.
* Re-add ironware.json compatible with current master branch.
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
* Fix Siklu Voltage
* Update tests
* Another test fix attempt
* Decimals..
* Ok, enough.
* Restore currently used index value and correctly push num_oid
* Update siklu.json
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* fix SQLSTATE[23000]: Integrity constraint violation: 1048 Column 'port_id' cannot be null
* If $entry['port_id'] truly is null (on insert) then Illuminate throws a fatal error and all subsequent processing stops.
* Cisco ISO (and others) may have null ids. We still want them inserted as new
* strings work with DB::table->insert().
Avoid writing "0" as port id when the data came back incomplete from the snmp poll, and when the existing data in the DB already contains a port. Keep the existing port id instead.
* Add FDB support for ArubaOS; modify some SNMP calls to allow community string indexing
* Apply coding styles, changed arubaos.inc.php comment headers
* Coding style
* Modify per items discussed at pull 10940
* ArubaOS test data
* ArubaOS header doc
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* Initial stab at switch input state sensor
* Fix indentions
* Fix indentions
* Index updates
* More useless changes.
* And it finally works.
* Open should be a WARNING state.
* Update email
* Add line
* One empty line, not three.
* This is getting ridic.
* Add test data
* Clean broken VRF lite code
* Change DB table for route discovery
* Add VRF simple support
* add port_id to db and discovery
* static-fy the translation arrays
* sort and search cleaning
* Sorting refactor and validation
* formatItem shortened
* Handle ifIndex==0 meaning no next hop defined (MPLS)
* Sync all create/updates
* purge in daily
* remove old route table
* get rid of inetCidrRouteNextHop_device_id
* fix wonky column orders
* add route snmprec
* fix sorting by interface
* Move to new config
* rename to route the new table
* Properly display ipv6 compressed addresses
* Translation before merge ./lnms translation:generate
* Update manifest
* Device Cache
also some additional device related models
* attribs from cache
* replace common attribute functions
* remove legacy cache usage
tidy up some collection manipulation
remove some unused or single use functions
* cleanup some items
* always return a device, to prevent bugs
* clear device cache when testing after each test
* fix double assignment
* Clean up function to take advantage of null object
* - update yzyxel mibs
- update definitions für ies series
- slot state and alarm support via yaml
* more sensors
* add new device Zyxel IES4206
* restore original ies files
* revert function stuff
* update to latest official mib
* rebase
* Added model, processor, fan and power supply for Alcatel Omnistack Switches
* Removed Index from description of Fan and power supply
* Merged PR #10655
* Added Temperature Sensor for AOS7+ Alcatel Enterprise Switches
* Added AOS7 mempools
* Added Tests
* Update aos.yaml
* Update alerts levels in state sensors
* Add test data
* added support for PDU/PDU2 MIB data (current, power) and added external sensor fpr humidity and temperature on PDU MIB
* added test data of 1 PDU-MIB device and 1 PDU2-MIB device
* Create raritan-pdu.json
* forgot to do save-data on last commit
* add ability to discover percent warning on mempools discovery
* remove wierd charachters from json
* remove database defaults, add defaults for Linux and Vmware
* update db schema
* update test data
* adapt hrstorage mempools
* rebase
* Add ECS4110 cpu usage
* Add cpu usage oid for ECS4110
* TESTED
* Fix EdgeCore ifOperStatus does not follow the Cisco convention
* Since EdgeCore use "lowerLayerDown" in ifOperStatus when port is unplugged
* On the other way, Cisco use briefly "down".
* So change "lowerLayerDown" to "down" to workaround the bug that will make port always show as up/up
* Refactor Edgecos cpu usage oid
* Codeclimate is unhappy about it maybe the refactor will make it happy.
* Add EgdeCore ECS4110 MIB
Just got MIB from EdgeCore
* Refactor Egdecos Mempool
* a bit refactor of Mempool discover and polling
* add support for ECS4110 via MIB
* Modify ECS-4110 MIB
* MODULE-IDENTITY change from ECS4110-52P-MIB to ECS4110-MIB
* strip off syntax error part(time range)
* Add EdgeCore ECS-4110 OS polling
* polling OS and Hardware via MIBs
* Fix typo
* Sorry that I am dazzled
* Fix Syntax Check
* Codeclimate is a bit aggressive
* Update edgecos.inc.php
* Update edgecos.inc.php
* Revert "Fix EdgeCore ifOperStatus does not follow the Cisco convention"
This reverts commit 27971b34a8.
* Add snmprec file for unit testing.
* Create edgecos_ecs4110-28t.json
* do not discover dbm sensors on shutdown ports
* rename confusing name from $sensor_type to $sensor_class
* Revert "do not discover dbm sensors on shutdown ports"
This reverts commit 46963f746a.
* Fixed foreach loop throwing errors when no vlans present, community id post 9528
* Added extra else / debug statement for validation
The modified changes allow for clear information regarding the discovery of devices where no port<->L2 Access/Trunk association is seen.
* Fixed Junos port/vlan relationships for els and non-els based software
* fixed tabs
* Add test data
* Updated test data
* Update module_tables.yaml
* Update junos_qfx5100.json
* Update junos_qfx5100.json
* Update junos_qfx5100.json
* Update opengear MIBs to latest version.
* Replace PHP signal discovery with YAML.
* Update Opengear YAML with new sensors.
* Add test data for Opengear.
* Add the test data json for Opengear.
* Named to numbered index to avoid data loss.
* Added support for snmp monitored PDU from fs.com
* Added support for snmp monitored PDU from fs.com
* Fix sysObjectID 1.3.6.1.4.1.30966
* Create fs-net-pdu.json
* Added support for DGD and BER that are avalible on newer infinera-groove FW
* updated tests for new groove sensors
* Update infinera-groove.inc.php
* Update infinera-groove.inc.php
* Force test to run again
* Default to null for group yaml discovery.
* Update test data for a154bda yaml group null fix.
* Changes to guessed limit functions for sensors.
Original behaviour
===================
The file `includes/discovery/functions.inc.php` contains
`sensor_limit_low()` and `sensor_limit()` which both attempt to
guess a sane value for sensors when no explicitly defined
low_limit or high_limit can be found during discovery.
Both switch control structures used in those two functions
have empty case statements which means that if one of those matches,
it's going to fall through and run the code for each subsequent
case until a `break` is reached.
For example, when we call `function sensor_low_limit(dbm, -13.036)`
it will return the value `-12.3842` instead of `null`. That is
because there will be a match at `case 'dbm':` which falls through
all the way to `case 'cooling':`, where it performs
`$limit = -13.036 * 0.95` before hitting a `break`.
Changed behaviour
===================
Removed `power_consumed` and `count` guessed low_limit and
high_limit, I personally added those sensor classes in PR #9471
when I didn't understand that a switch control structure has
fall-through behaviour so I can guarantee that guessing limits for
those is a mistake on my behalf. It should not be there, only
power_factor can have guessed limits. Apologies for the issue,
I'm still a beginning programmer!
Furthermore, I removed guessed high_limit values for `current`
and `power` because these are supposed to draw higher values as
more devices or components are installed on for example a PDU or
a chassis.
Finally, I removed guessed low_limit and high_limit for `dbm`
sensors, there is a much too large variance in power budget on
commercially available optical transceivers for there to be a
sensible window where you can guess these values.
* Documentation on adding sensor classes.
* Update test data - sensor limit changes @ 30212d2
* Aruba IAP: Fix Radio State Sensor
Fix state sensor for radio status from warning when disabled to unknown state.
* Update aruba-instant.json
* Update aruba-instant_105.json
* WIP - Add MPLS Support
This introduce the generic MPLS support
- New database tables for MPLS LSPs
- actually discovery and polling on NOKIA SR OS (Timetra) devices
- new routing->MPLS HTML pages
- ToDo MPLS LSP paths table and views
Suggestions and improvements are welcome
* add db schema
* some fixes
* add path table, discovery and polling
* add path views
* add test data
* Convert MPLS module to new style
Implement a SyncsModels trait to simplify code a lot
* abs() for negative value from snmp (bug?), test data
* fix db schema
* Fix up test data, remove uneeded data in json
* fix whitespace
* Dynamic entPhysicalIndex values for YamlDiscovery
* Use degree symbol when displaying temperature values
* Adjust SNMP options for new snmp_get_multi()
The OS polling module for mrv-od was using snmpget commands with
-Ovqs, rather than -OQUs, which meant that the equal sign was
stripped in the snmpget output. But that equal sign is now used
as the explode() delimiter so it broke the construction of the
returned array for the snmp_get_multi() function.
Additionally, I removed the NBS-CMMC-MIB:: prefix which is no
longer returned by snmp_get_multi() as part of the OID. Now,
the mrv-od.inc.php OS polling module is retrieving data from
positions in the array with actual content.
* Convert mrv-od to yaml, improve sensors discovery
Converted sensors discovery for mrv-od to yaml, retaining all
functionality for pre-cache, dbm, and temperature. Replaced specific
SFF-8472 Digital Diagnostics state sensors with generic ones, given that
we are now reading out detailed values through new dbm, current, voltage
sensors.
Reasoning: the generic Digital Diagnostics state sensors report state
diagsOk, or else the worst severity level measured among all of the
Digital Diagnostics values for that optical data point. You'd really
only want to set a generic "alarm" so the box can report that it
thinks something is wrong, whereafter a human can look at the graphs
and/or the CLI to draw their conclusions about the alarm. Otherwise,
things would quickly become too spammy as you are essentially duplicating
every sensor across both regular measurements and state measurements.
Further changes:
- Increase maximum number of detected PSUs from 4 to 8 per the MIB.
- State sensor to detect (in)sufficient power budget for all modules.
- Use skip_values to hide state sensors with the notSupported value.
- Use skip_values to hide sensors which are unsupported per the MIB,
signified by the device returning special values -1 or -2147483648.
- Add dBm, temperature "over" graphs to the mrv-od device header bar.
* Add mrv-od entity-physical support
MRV does not use the ENTITY-MIB data format, so we had to reconstruct
the inventory from their proprietary format using the following tables
from their NBS-CMMC-MIB:
- nbsCmmcChassisTable
- nbsCmmcSlotTable
- nbsCmmcPortTable
Additionally, since sensors didn't have their own ifindex in the
NBS-CMMC-MIB, I went ahead and appended the last OID digit to
the "containing" ifindex create a unique number. The same was
done for the sensors in the yaml-discovery.
* Test data for mrv-od, fix 2* pre-commit.php issues
* Fix entPhysicalIndex returning 0 instead of null
Some unit test breakage was caused by 62167ebcb which changed
the code to return 0 instead of null when {{ $index }} was
set as the entPhysicalIndex in the YamlDiscovery. So now we
detect if it returns some value which may be interpreted as
false, and if so we set null rather than 0.
* Fix for RouterOS LLDP discovery
Only the first nine neighbors were correct on RouterOS - missing hexdec() led to the remaining neighbors being linked to the wrong ports. Ex. port 10 in hex was incorrectly linked to port 10 decimal when it should be 16 in decimal
* Added test data for MikroTik RouterOS CRS317 switch
* Fix Cisco MAC acounting discovery, polling and HTML templates.
* Remove empty code.
* Provide test data for cisco-mac-accounting module.
* Added module test dependency.
* New OS: Aruba Instant
* New OS: Aruba Instant
* recreate test data
* remove aruba_instant test data
* remove empty file includes/definitions/discovery/aruba-instant.yaml
* fix state sensor discovery
* remove minor changes to includes/polling/functions.inc.phpwq
* move mac helper functions to Rewrite class
* simplify snmpwalk_group usage, general code cleanup
* fixes
* fixes
* fixes
* fixes
* fixes
* fixes
* recreate test data for 105 variant
* Add Client sensors for 8.4.0.0+
* begin stream-lining discovery and polling. separating discovery functions
* update test data
* update test data
* update test data
* improve mempool discovery/polling, clean up os polling, improve state discovery, improve os definition, misc fixes to wireless sensors module
* attempt to implement custom AP and client discovery and polling
* code fixes
* re-add ap count top graph
* more fixes
* more fixes
* more fixes
* more fixes
* remove some debugging, update test data
* code cleanup
* code cleanup
* address some scrutinizer warnings
* Fix Avtech discovery
pre-cache stored the data incorrectly
* Fix RA-4E external sensors
sen1 had incorrect oids (duplicate of sen2)
Description oid from data doesn't match the mib, perhaps outdated MIB?
* add test data
* Updated 4E MIB
* additional sensors for timos
change to yaml discovery for sensors
remove obsolete tmnxChassisPowerSupplyTable
* inconsistent data in snmpsim
* fix snmpsim data
* fix snmpsim data
* fix snmpsim data
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* Added support for IONODES video encoders
* fixed expected number instead of string value error when running tests
* removed extra colon
* added mibs_dir for ionodes
* removed IF-MIB from ionodes.yaml
https://community.librenms.org/t/modify-discovery-protocols-inc-php-to-fix-neighbours-problem-on-extreme-networks-exos-switch/7797
The bug is caused by SNMP polling switch-1 with ifIndex to DB (associate
ifIndex when adding switch), the port “1” is “1001”. Another switch-2
discover the switch-1 port “1” by LLDP is “1” (after LiberNMS get this
information). Two values are not equal (“1001” != “1”). If I change to
use ifName associate when adding device, because ifName is “1:1”, so it
can not equal to LLDP too (“1:1” != “1”).
* Added support for HikVision-DS Cameras
clean up
removed pointless file, cleaned up code
fixed failing unit tests, a bit of cleanup
WIP - will rebase
split hikvision into hikvision-nvr an hikvision-cam
* removed unneeded comment and rec file
* New Device: ATS - Automatic Transfer Switch
* Small fixes
* Fixed test data
* More fixes, again
* Moved temp to php to retrieve limits from device
* Fixed perms again...
* Final test file. Or I hope so...
* device: Added support for APC AP9810 zone contacts
* fix: disconnected sensors been detected. And iemConfigProbesTable certainly does get used and it reference
* fix: load is VA, not to be confused with watts. This could be different per device though...
Apparent Power unit = VA
Real Power unit = Watts
And Keeping codeclimate happy
* feature: updated APC MIB
* feature: added test data for APC Smart UPS SMX750i and AP9810 with contact switches
* The SNMP value ciscoEnvMonTemperatureThreshold is now stored as high limit (and no more as high warning limit)
* Updating misc/notifications.rss to make the user aware of the behavioral change
* Addition of missing </description> in the misc/notifications.rss
* Automatic sensor limits are now optional. Set ['discovery']['sensors']['autolimit'] = false to disable.
* Changing new config variable name from discovery.sensors.autolimit to sensors.guess_limits
* Updated documentation: ['sensors']['guess_limits'] value added
* adding paper tray status and error states
* adding paper tray test data
* Create jetdirect_papertray.json
* Store printer supply type
* Update json data
* fix style
* Dantel WebMon Support
Webmon tep discovery changes
Fix Code Climate Issues
* WebMon - Move MIB to folder and create json reference
* Minor changes to Webmon polling
* Add data scrubbing state to Synology RAID status
Adds a new state translation to Synology DSM RAID status sensor, so it displays "DataScrubbing" while the operation is running. Previously it would just show "# 13".
* Update Synology RAID MIB
Downloaded from
https://global.download.synology.com/download/Document/MIBGuide/Synology_MIB_File.zip
* refactor: advanced sensor states
mark create_state_index($state_name) as E_USER_DEPRECATED?
* fix: minor corrections
* fix: mib has partialSync(9) and incompatibleVersion(8)
* fix: corrected netagent2upsstate - Sleeping(5)
* fix: NetAgent2 upsThreePhaseUPSStatusInverterOperating correction
* refactor: array() be gone
* Refactoring includes/discovery/sensors/state/extendair.inc.php with arrays
And tidying up array formatting in other files
* fix: minor typo
* standardising array item names
removed redundant "if ($state_index_id !== null) {"
* workaround: procurve & serverscheck
a sensor is causing create_state_index($state) to return null.
The updated code doesn't allow for this and thus a hybrid is being used.
* standardised naming of state info. Caused a typo $state_name instead of $status_name
$state_name is the standard
* converted compas to square arrays
* Converted APC states using preg_match to new create_state_index() call
* Update boss.inc.php
* newdevice: Added support for Alpha Comp@s
http://www.alphainnovations.eu/compas
* fix: Updated state values
state values persist in database, even after deletion of devices.
Not a 100% how to purge them.
create_state_index($state_name, $states) doesn't update the database, if the states have changed
* refactor: comp@s OS state sensor now updated to latest format
* Migration script and data feeding
* Adding the columns in the GUI
* build schema
* update FDB test data
* Use of timestamps()
* ignore created_at and updated_at in tests, and regenerate test impacted
* daily.sh does the cleaning
* space cleaning codeclimate
* Use carbon instead of str-val
* handle when $fdb_entry->updated_at and created at are null
* handle when $fdb_entry->updated_at and created at are null (force travis rerun)
* Doc update
* Doc update
* Fixes for SZ detection
* Ruckuswireless devices
* remove registered mibs
* Code Climate Fixes
* updated test data for zd1100 & zd1200
* Updated database test data
* trying to fix smartzone test data
* updating zd test data
* more code climate fixes
* Update ruckuswireless-unleashed.yaml
* hide total clients if 1 ssid
* fixing smartzone ap status
* smartzone ap count fixes
* fixes because of git
* fix zd ap counts
* Update ruckuswireless-sz.json
* Update ZD1200 test Data
* Update ruckuswireless-sz.snmprec
* Update Database test data
* Update zd1200 database data
* Update ruckuswireless_zd1100.snmprec
* Update ruckuswireless_zd1100.json
* Update ruckuswireless_zd1100.json
* Update ruckuswireless_zd1100.json
* Code Climate Fixes
* Code Climate Fixes
* Update Ruckuswireless.php
* Code Format Fixes
* add mibs,first commit
* adds support for Nokia ISAM Plattform
* remove some comments
* change os polling to multi oid
* Restore file headers
* Fix discovery by sysObjectID
* first deactivate checks against IHUB (timos), It not necessary so long we can not provide more thatn one snmp community per device
* move snmp state and temperature from pre-cache
* Update os_schema.json
PR #9546 has resulted in Platform being detected as
"Juniper Virtual Chassis Switch" when a set of devices
is stacked. Hence, no more possibility to see whether
it is for example an EX2300 or EX3400 virtual-chassis.
This commit falls back to using rewrite_junos_hardware()
if the "Juniper Virtual Chassis Switch" string is detected
in boxDescr, resulting in usable hardware data.
Caveat - it's possible to build a virtual-chassis of
multiple switch models, but only for higher end hardware:
https://www.juniper.net/documentation/en_US/junos/topics/concept/virtual-chassis-ex4200-overview.html#jd0e75
Example SNMP output:
mschmidt@nlrtm1-librenms1:~$ snmpwalk -v2c -cremoved -m JUNIPER-MIB -M /opt/librenms/mibs hostname jnxBoxDescr
JUNIPER-MIB::jnxBoxDescr.0 = STRING: Juniper Virtual Chassis Switch
Also reported previously via the community forums:
https://community.librenms.org/t/pr-9546-results-in-junos-platform-detection-quirks-in-combination-with-virtual-chassis/6537
* update some mibs
* extend snmpwalk_cache_twopart_oid function
* add raisecom dbm and temperature sensors
* add test data
* add some more sensors
* Update raisecom.inc.php
* Update raisecom.inc.php
* Updated DataDomain MIB, Added DataDomain Storage poller and discovery
* Fixed issues pre-commit issues
* Removed extra blank lines
* Make polling less redudant
* Remove blank line
* Remove device os detection since it's not needed. Add test data for DataDomain
* For better compatibility, we will check if the $index is null prior to adding the storage
* Fix: is undefined...
* Update datadomain.inc.php
* Update datadomain.inc.php
* Fix Sentry3 voltage sensor discovery
Previous fix broke voltage sensor discovery with superfluous .1 in the SNMP OID. I have fixed my install with this patch but other testing should probably be done.
* Update sentry3.json
* Adding Sonicwall SMA 400 support
* Added metric clients for use in SSL VPN client alerting
* Support for specifying multiple sensors for clients metric
* RAM info supported
* CPU info supported
* Added test data
* Dashes in graph aren't really useful
* Updated test data with script from upstream (#10)
* Fix style errors (#11)
* Now 8 spaces on line 56
* port clients sensor to count
Some sensor cleanups (move all icon definitions to one spot)
* update port data
* add sensor test data. Make a guess at userLicense output since it is missing.
* cleanup missed items
* typo
* Updating test data
* Fixed missing CPU info
* Recreated test data
* Recreate test data after rebase
* Test data without ignore statements in config
* Fix some comment and documentation typos.
* Fix various entphysical page display issues.
- Resolve flickering during loading (missing liClosed for nested items).
- Clicking a sensor actually takes you to the matching graph now.
* Add a few nicecase() calls to clean up html page display.
* Create discover_entity_physical() function
- Add discover_entity_physical() function into includes/discovery/functions.inc.php
- This allows for an easy implementation of OS-specific entity-physical discovery.
- Update includes/discovery/entity-physical/entity-physical.inc.php to use the new function.
* Add power_consumed and power_factor sensors.
* Two new icons, make more entPhysical data visible.
* Pre-commit fix: blank line found at end of control structure.
* Add Schleifenbauer OS support.
* Now really fix the comment typo.
* Fix parsing mistakes.
* Add a generic count sensor.
* Make the Schleifenbauer discovery use count instead of state sensors.
* Don't place count sensor at the top, add sane limits for Schleifenbauer
* Finetuning the rrd_options, changing Schleifenbauer sensor names.
* Update schleifenbauer.svg
* optimize logo too
* add test data
* fix sensor value display (spaces break it)
* update entPhysicalIndex
* fix_if_discover
* Update ports.inc.php
* Fixed overwriting IfDescr and IfAlias overwriting
* removed whitespace
* added ifname, ifalias and ifdescr copy if it is emtpy or null
* removed ifAlias from update to prevent overwrite
* removed ifName and ifDescr from update to prevent overwrite
* added is_port_valid before doing copy actions between ifDescr,ifAlias&ifName also added back ifDescr&ifName update
* Update ports.inc.php
* Update functions.php
* Update ports.inc.php
* Update exa_e7-2.json
* Update fortigate.json
* Merge ethernetprobe2 into akcp and improve akcp
Use higher resolution temperature values if available
Properly hand F/C temperature scales (LibreNMS always uses C)
Add current, voltage, airflow (no test data)
Move humidity to yaml
* Update akcp.snmprec
* Update akcp-serverprobe8.json
* Add group
* Update test data
remove old MIB
* add group to sensor initial discovery and use dynamic_discovery_get_value template syntax on them
* spaces
* switching to YamlDiscovery::replaceValues
* testdata from ibmc
* testdata from nxos
* testdata from omnitron-iconverter
* testdata from vrp
* adapt discovery_schema to accept variables
* remove pattern
* Update discovery_schema.json
Improves visual identification for sensors
- [x] Docs
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
Discovers 2 of 6 found in the test data then updates it to not match.
Setting the wrong oid.
Tracking two specific macs on a single AP that don't match the label.
If they roam it won't change until next discovery.
If this is wanted, it should be written in the wireless section.
* Fix Zynos temp warn limit
And others, but this seems to be the only one that uses
remove some odd limit restriction in the poller
* More consistent rounding for sensor limits
* round all numeric limits to 10 digits
* update test data
* Remove complex calculation as negative limit values are already swapped as needed.
* ZyXEL XGS4600-32F
- Added mib for diagnostics
- CPU/Mem
- Temp/Fan/Voltage
- Updated zyxel group mempools
- Updated test data
- snmprec
- json
- Altered ZyWall
- To exclude XGS switches
* Defined ZYXEL-HW-MONITOR-MIB at the top of file
* Removed .MIB
* update some mibs
* add virtual router ports
* coding style
* refactor
* some refactoring
* some typos
* add snmprec
* Fix capturing VRF entries with no ports
* updated test data
* manually fix test data
Not going to try to fix the data capture for backslashes at this time.
* Revert "manually fix test data"
This reverts commit 2c98450706.
* timos data for net-snmp 5.7.3 ?????
* Updated dlink support with additional health,mempools and processors
* Update dlink.inc.php
* Update dlink.inc.php
* Added test data
* add tests/data/dlink_dgs-1510-28.json
* actual data for the new items
hopefully doesn't break anything
Mostly issues with snmp oids and options containing spaces. Try to remove all of those.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* Adding ifType to base_oids
* Improve discovery (update ifType) and polling (save ifType)
* Updated test data
* Updated json test data
* vlan isn't filtered by default :P
* With default ignored ports
* Update newer test data
* Update to Added support for HeliOS 10Ghz failover to 5Ghz state sensor
Converted /includes/discovery/sensors/state/helios.inc.php to yaml
Test units included
CLA has been signed
* Added support for CeraOS TX Mute Status state sensor, NTP Client Lock Status state sensor.
Updated CeraOS temperature sensor, now called from includes/definitions/discovery/ceraos.yaml - removed includes/discovery/sensors/temperature/ceraos.inc.php
Corrected issue with CeraOS temperature reverting to zero after polling (added a trailing . to the num_oid)
Amended includes/definitions/discovery/helios.yaml with changes as advised by Neil Lathwood and Tony Murray
* Added unit test data and corrected ceraos.yaml validation error
* Added support for Ceraos Wireless Sensors (php)
Cross Polar Interference
Wireless Frequency
Added Ceraos state sensors (yaml)
NTP Client Lock Status
Tx Mute Status
Radio Operational Status
Remote Radio Operational Status
IDU Temperature
Power Amplifier Temperature
* Fix up tests, etc
* remove helios changes, fix style
* Use of dynamic_discovery_get_value in can_skip_sensor in order to use all available oids in skip_values
* Use LibreNMS\Device\YamlDiscovery code instead of keeping duplicated function can_skip_sensor
* Fix Travis errors
* Added support for SAF CFM L4 wireless device
* Added copyright statement according to LibreNMS documentation
* Added snmp test data and excluded some discover modules from os definition
* Style issue fixed
* More descriptive function
* MIB file rename
* Rename MIB file and change other files accordingly
* Added test data
* Removed debug statement
* Last checks
* Style changes
* Style changes
* Style changes
* Style changes
* Code restructure to make it more readable
* Fixed error in foreach
* Style issues
* Formatting of states within Yaml changed to make it more readable
* Omit default arguments
* Better code and modules only in CFM-M4P-MUX
* Chaged cfml4 to cfm
* Update Sensor.php
* Update Sensor.php
* Better handling of scientific numbers
* Better handling of scientific numbers
* New test data
* Correction on handling trailing zeros
* Different way of cleaning the numbers based on Tony's input
