* feat(3rd_party_board): Add Fri3d Badge 2024 (ESP32-S3 WROOM 1)
Image: https://github.com/Fri3dCamp/badge_2024/blob/main/docs/badge2024.jpg
More info on https://github.com/Fri3dCamp/badge_2024
* fix(3rd_party_board): Fix built in led for fri3d badge 2024
and use less X_ variables
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat(board): Add Alfredo NoU3
Add board support for Alfredo Systems NoU3.
https://www.alfredosys.com/products/alfredo-nou3/
* fix(board): added I2C and SS pins to alfredo nou3
* fix(board): set SPI and I2C pin defs to -1
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* Update M5Stack related board and pin configuration
* Remove redundant definitions
* Roll back the rainmaker partition table related configuration
* delete pid & vid
When performing an "OTA" upload via a network port, the user may configure the sketch to require
an authentication password.
Arduino IDE presents a "Configure and Upload" dialog when the user triggers an upload to a network
port. The user can provide the authentication password via the field in that dialog. The
`upload.field.password` platform property is then set to the value provided by the user.
The platform uses the `tools.esp_ota.upload.pattern` command template to pass this value to the
espota upload tool via the tool's `--auth` flag.
Since the value of the `upload.field.password` platform property is set by the user via a free text
field, it might contain any characters. Since some characters (e.g., spaces) can be problematic in
a command line, it is essential to wrap it in quotes. This was done for the Arduino IDE 1.x variant
of the command template, but that was not ported when the pluggable discovery variant of the
command pattern was defined. This causes a spurious failure of the OTA upload process if the user
provides an authentication password that contains problematic characters.
For example:
```
"C:\Users\per\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.0.4\tools\espota.exe" \
-r -i 192.168.254.145 \
-p 3232 --auth=foo bar \
-f "C:\Users\per\AppData\Local\Temp\arduino\sketches\E2D807FABB134A2A60A1B9C7D14FE02B/11973.ino.bin"
usage: espota.exe [-h] [-i ESP_IP] [-I HOST_IP] [-p ESP_PORT] [-P HOST_PORT]
[-a AUTH] [-f FILE] [-s] [-d] [-r] [-t TIMEOUT]
espota.exe: error: unrecognized arguments: bar
Failed uploading: uploading error: exit status 2
```
This is prevented by wrapping the `--auth` flag in quotes:
```
"C:\Users\per\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.0.4\tools\espota.exe" \
a-r -i 192.168.254.145 \
-p 3232 "--auth=foo bar" \
-f "C:\Users\per\AppData\Local\Temp\arduino\sketches\E2D807FABB134A2A60A1B9C7D14FE02B/11973.ino.bin"
Sending invitation to 192.168.254.145
Authenticating...OK
Uploading: [ ] 0%
```
* Correct Float type size
Correct in the data type table and the API call the size of the Preferences `Float` type and returned value for `putFloat()`.
* Update Float call prototype
* Correct Float type size
Correct Float type size in the Preferences Types table.
Revise text to use `float_t` in place of `float`.
* Correct doc build error
Correct the `Explicit markup ends without a blank line; unexpected unindent.`
* Update WebServer.ino
* Enable FAT and LittleFS filesystems as configured.
* use new versions of RequestHandler::canHandle and RequestHandler::canUpload
* Update Documentation
* Documentation changed accoring review comments.
* README.md changed accoring to review comments.
* feat(net): Add NAPT examples for STA and ETH
* feat(net): Add NAPT example for PPP
* feat(net): Add CI configs to skip H2
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* fix(uart): Sets XTAL as clock source for uart
C6 and H2 have problems after returning from light sleep. The baud rate seems to be off when APB is used as clock source.
This fix solves the issue using a steady clock source.
* fix(typo): Typo and commentaries
Adds C2 in the XTAL list.
* fix(uart): adjust get/set baudrate
Fixes the functions for reading/writing UART baudrate by using IDF functions instead of HAL/LL.
* fix(uart): uses REF_TICK for ESP32/S2
* fix(uart): esp32/s2 baudrate > 1MHz
Fixes the baudrate for ESP32 and ESP32-S2 when the baud rate is higher than 1MHz.
REF_TICK is just 2MHZ and can handle up to 1MHZ baudrate.
* fix(uart): rxTimeout minimum
Default RxTimeout changed to the minimum = 1.
When TICK_REF is used as clock source, this is mandatory,
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Prints the value of the chip features bitfield to printChipInfo() to facilitate debugging.
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* fix(lwip): Add early out in `NetworkUDP::parsePacket()` when socket has no data
Previously, `NetworkUDP::parsePacket()` would take the time to allocate a 1460 byte buffer
to call `recvfrom()` with, immediately freeing it if there was no data read.
This change has it check if there is available data via `ioctl()` with `FIONREAD` first,
saving the allocation and thus significantly increasing performance in no data situations.
* fix(lwip): Initialize `len` to ensure it's set before check
* ci(wokwi): Pass diagram.json file if exists to pytest
* ci(wokwi): Rename diagrams to enable editing in Wokwi editor
* ci(tests): Use newest pytest version
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* feat(board) add Waveshare ESP32-S3-Matrix
Adds support for the Waveshare ESP32-S3-Matrix board. Includes changes to the Rainmaker partitions as per PR #10046 .
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* add "getBattery" functions + #define simplicity
replaced all function protections with a #define to simplify code functionality. Also added "getBattery" functions to leverage "esp_modem_get_battery_status" call in ESP-MODEM.
* add "getBattery" function defs to PPP.h
* fix(ppp): uncomment error logging, change new function naming
* fix(ppp): rename new functions for naming conformity
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* IDF release/v5.1 dc859c1e67
* fix(lwip): Filter out V6 packets if V6 is not enabled
the ESP might accept and act on some IPv6 packets, even though IPv6 is not enabled for the interface in Arduino. This change makes the ESP ignore all IPv6 packets if IPv6 address is not available.
* fix(lwip): DNS header is not required
* fix(ot): Add LWIP_HOOK_IP6_INPUT_CUSTOM support
* feat(ledc): Allow attaching multiple pins to 1 channel
* feat(ledc): Add ledcWriteChannel function
* feat(ledc): Print info about already set channel
* docs(ledc): Add ledcWriteChannel function and attach update
* feat(ledc): Add example and fixes
* feat(ledc): Remove commented code
* feat(ledc): Fix missing new line at end of file
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
