* Added new Olimex boards
Added variants for ESP32-H2-DevKit-LiPo and ESP32-SBC-FabGL boards
* Changes on the ESP32-POE and POE-ISO
Added menu for selection of the:
1) PSRAM enabled/disabled
2) Flash size 4/16 MB
3) Flash mode QIO/DIO
4) Partition Scheme additional options
* Updated pins_arduino.h for ESP32 POE, POE-ISO and Gateway
Due to the latest changes in the ethernet library/examples (https://github.com/espressif/arduino-esp32/pull/9242) full package of definitions of the ethernet macros is for each board that has non-default values.
For POE and POE-ISO is added a preprocessor condition #if defined BOARD_HAS_PSRAM due to our specific hardware because GPIO 16 and 17 are in use when PSRAM is enabled.
* Update boards.txt
Removed the -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
fix flags as suggested by Jason2866 and me-no-dev
* Update boards.txt
Reverted changes for ESP32-POE and ESP32-POE-ISO
* Update boards.txt
Rearrange of the enable/disable entries of the PSRAM option for ESP32-SBC-FabGL to be enabled by default.
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* fix(esp32): 🐛 Fixed "Invalid mbox" in the Wi-Fi example
* fix: changes the code to actually connect to the WiFi in roder to get time and date
* fix: removing call to WiFi.begin() at the end of the sketch. It must be called at first.
---------
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
* Fix: adds RMT new function to io_pin_remap list
* Fix: adds rmtSetEOT(int pin, uint8_t EOT_Level) to the new API list
* Fix: error in macro definition - left over from function signature
Update subpart ("PostArg") parsing to ignore extra headers instead of silently failing.
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* RMT (featt): adds a new function to set EOT level after RMT writing
* RMT (feat): adds new feature to set the EOT level after writing RMT channel
* adds return value to rmtSetEOT()
* adds bool return to rmtSetEOT()
* adds return value to the rmtSetEOT() function
* FIX (rmt): fixes eot_level setting using flags in the TX structure
* RMT(feat): Create RMT_EndOfTransmissionState.ino example
* Update cores/esp32/esp32-hal-rmt.h
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Update cores/esp32/esp32-hal-rmt.c
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Update cores/esp32/esp32-hal-rmt.c
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Split start_ssl_client into two phases; to allow the implementation of protocols that use some sort of in-band STARTTLS or STARTSSL signal to upgrade a plaint text connection to SSL/TLS. Examples of these protocols are XMPP, SMTP and various database TCP connections.
* Remove removed setTimeout that was accidentally included (was removed for IDF >=5), bring timeout inline with the other timeouts (ints), fix cert/key checks to look if there is actually something there (all issues caught by the CI/CD on windows-latest
* Quell compiler warning; use the right timeout
* Newer versions of MBEDTLS make the client key struct private (and most of the x509 struct too), so absent of a non-null pointer we cannot check wether it is populated. Solve this by looking at the version (as 0 is not a valid x509 version).
* Fix another \(rightfull\) compiler warning iwth the version pointer
* Quell CI/CD runs on non-WiFi supporting hardare
* Quell CI/CD runs on non-WiFi supporting hardare
* Fix typo in directory name
* Apply suggestions from code review
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Rename Files
* Remove leftover file
---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* feature: create a Trust on First Use example the quell the increasingly common copy & paste of the insecure approach making it to production
* Quell CI/CD runs on non-WiFi supporting hardare
* Update libraries/WiFiClientSecure/examples/WiFiClientInsecure/WiFiClientInsecure.ino
typo/improvement to text
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Update libraries/WiFiClientSecure/examples/WiFiClientTrustOnFirstUse/WiFiClientTrustOnFirstUse.ino
typo/improvement to text
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Update libraries/WiFiClientSecure/examples/WiFiClientTrustOnFirstUse/WiFiClientTrustOnFirstUse.ino
Fix formatting
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Update libraries/WiFiClientSecure/examples/WiFiClientTrustOnFirstUse/WiFiClientTrustOnFirstUse.ino
typo/improvement to text
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Update libraries/WiFiClientSecure/examples/WiFiClientTrustOnFirstUse/WiFiClientTrustOnFirstUse.ino
typo/improvement to text
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Update libraries/WiFiClientSecure/examples/WiFiClientTrustOnFirstUse/WiFiClientTrustOnFirstUse.ino
typo/improvement to text
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Update libraries/WiFiClientSecure/examples/WiFiClientTrustOnFirstUse/WiFiClientTrustOnFirstUse.ino
typo/improvement to text
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Update libraries/WiFiClientSecure/examples/WiFiClientTrustOnFirstUse/WiFiClientTrustOnFirstUse.ino
typo/improvement to text
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Various things can all stop_ssl_socket() which sets the socket to -1; but the WiFiClientSecure checks for _connected. So we want to make sure the latter is always set. And thus have moved the state handling around *ssl_client down into the C code; below WiFiClientSecure.
* Unitialized NVRAM/EEPROM is actual set to 0xFF; so adjust for this. And print the LF/CR for the header lines.
* Update libraries/WiFiClientSecure/examples/WiFiClientTrustOnFirstUse/WiFiClientTrustOnFirstUse.ino
---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* refactor(on-release): improve platform.txt path replacements
Use regexs to replace all occurrences of `{runtime.platform.path}` with
the correct `{runtime.tools.*.path}`, regardless of directory separator,
and remove dependency on specific text around each path.
Note that the order has been changed to ensure that the longest paths
are replaced first, to avoid replacing parts of other paths.
* fix(platform): Windows backslash cleanups
Ensure Windows paths properly use a backslash as folder separator.
* feat(platform)!: use new Arduino Debug API
Implement sketch debugging according to the official Arduino
Platform Debug Specification [1].
The biggest improvement is that now `launch.json` can be fully
customized by the core (including the type of each entry),
so there is no need to copy files in the sketch folder.
In particular, `debug_custom.json` is not used anymore.
[1] https://arduino.github.io/arduino-cli/latest/platform-specification/#sketch-debugging-configuration
BREAKING CHANGE: This commit requires Arduino IDE 2.3.0 or later to use
the debugging features. Older versions will no longer be able to start
a debug session successfully.
* feat(debug): pass objdump path to resolve globals
Cortex-debug requires objdump to be in the same folder as gdb, or needs
the full path to the executable in the `launch.json` file. This is now
possible with the new debugging API.
* feat(debug): conditionally enable debug button on Nano ESP32
If the `debug.executable` variable is null or unset, the Debug button
appears grayed out. The new IDE also takes current parameters into
account, allowing to conditionally enable the Debug button only when
some conditions are met.
* on_release: allow single board packages
---------
Co-authored-by: Martino Facchin <m.facchin@arduino.cc>
* Update Update.h
* Update Updater.cpp
* Add files via upload
* Add files via upload
* Add files via upload
* Update Update.h
* Update Updater.cpp
* Add files via upload
* Revert changes
* Revert changes
* Fix CI
* Fix format
* Skip H2
* Use new
* Fix comments and formatting
* Format example
* Remove binaries and QoL improvements
---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Fix ESP32-Solo WDT on HTTP OTA update
* Fix ESP32-Solo WDT on HTTP OTA update
* Fix commits
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
The Arduino Platform Specification requires that the recipe hooks are
distinguished by a number and does not endorse using text labels. Fix
all the usages of recipe hooks to use numbers.
Closesarduino/arduino-cli#2369 .
* Proposal for fixing file webserver uploads via form upload.
The form parser has shown to have issues with files ending with "--\r\n". This commit replaces the form parser with the parser from ESP8266, which passes the test case.
* Replace _uploadReadByte() in WebServer/Parsing.cpp with ESP8266 implementation.
* Changes on the requirements file to remove dependencies
* Comment removed
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Separated library sources in cmake for selective.
* Reodered selective process to match CI script
* Fixed missing SimpleBLE in library list
* fix(cmake): Remove duplicate or non existing sources
* fix(cmake): Remove required component
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* OTA upload often fails when client.read() return -1 and we subsequently try to write 4 gigabytes to flash. Fixed by signed comparison and retry.
* Delay of 1ms already solves the issue
* Update libraries/ArduinoOTA/src/ArduinoOTA.cpp
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
---------
Co-authored-by: Leif <git@leif.lc>
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Update Ticker API to compatibility with ESP8266, prepares for co-op loop Scheduler
* Fixing Build server complaints
* Fix omitted casts in template member function
* Changes after review
* Expose µs resolution of OS API in Ticker class
* Return Ticker to libraries only for modularity.
* Unify Ticker examples.
* Default for LED_BUILTIN
* In Ticker, the *scheduled functions become available in another development branch.
* Astyle from ESP8266
* Fixed Arduino keywords.txt
* 64bit integers instead of 32bits, timer functions on ESP32 accept 64bit integers.
* Move code from header into compiliation unit.
Reformat.
* Test case same as ESP8266
* Implementing inline in header saves 204+ bytes program size.
* Examples
* Fix a compiler warning due to c-style casting.
* Revert formatting changes
* More format reversions
* Revert
* Revert
* Revert
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* Adds SparkFun Pro Micro ESP32-C3 variant file
Adds SparkFun Pro Micro ESP32-C3 variant to boards.txt
* removes some pin definitions that are defined elsewhere
* removes the accidental camel case in variant folder name
* Attempts again to fix camel case in the variant file
---------
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* Fix ambiguous for TwoWire::requestFrom() methods.
* Remove TwoWire::begin(int) overload
Inside the function, this overload truncated the data type to a shorter one. This could break some users' hopes.
* Rewrite TwoWire with using HardwareI2C
- implement proposal https://github.com/espressif/arduino-esp32/pull/8818#issuecomment-1792191815
to bring the HARDWARE interface into compliance
* Fix TwoWire::end() return type.
* Fix TwoWire::setClock() return type.
* Fix no return statement in the TwoWire::requestFrom.
* fix(libraries/Wire): fix bad return-statement
Remove non-void values of the return-statements in function returning 'void'.
* style(libraries/Wire): replace tabs with spaces
* refactor(libraries/Wire): use slave without support
TwoWire::begin(uint8_t address) should be available without slave
support by SoC?
* refactor(libraries/Wire): remove unused variables
Compiler reports "Wire.cpp:393:15: error: variable 'err' set but not used [-Werror=unused-but-set-variable]".
* refactor(libraries/Wire): remove unused variables
Compiler reports "Wire.cpp:337:15: error: variable 'err' set but not used [-Werror=unused-but-set-variable]".
* fix(libraries/Wire): hide slave support elements
TwoWire::user_onRequest is used only in conjunction with slave support?
* refactor(libraries/Wire): remove temporary comment
* fix(libraries/Wire): restore an accidentally deleted implementation
TwoWire::endTransmission() was accidentally deleted from a cpp file.
* refactor(libraries/Wire): return return types
In TwoWire class return return types.
* fix(libraries/Wire): fix return type
* refactor(libraries/Wire): add return statement if slave isn't supported
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* refactor(libraries/Wire): fix indentation
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* refactor(libraries/Wire): fix indentation
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* refactor(libraries/Wire): fix indentation
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* refactor(libraries/Wire): remove unnecessary empty lines
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* feat(wifi): Improves WiFiMulti
* fix(wifi): Fixes Initialization of Security Mode
* feat(wifi): simplifies the example by using HTTPClient
* fix(WiFi): fixes a type in the commentaries
because print-to-all-clients is not implemented
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
* feat(i2s): Add I2S examples
- ES8388 loopback example using the LyraT board
- ESP32-S3-EYE record WAV to SD card example
- Simple tone example
* docs(i2s): Add I2S API docs
