From 4bcd914bdf99b8ab78c7d6c67264f71f0e04e20d Mon Sep 17 00:00:00 2001 From: minima Date: Wed, 9 Feb 2005 11:10:54 +0000 Subject: [PATCH] fix some typos rearrange and update a few things in the installation manual --- html/installation_en-1.html | 32 +++-- html/installation_en-4.html | 125 +++++++++-------- html/installation_en.html | 4 +- html/spiderFAQ_en-1.html | 2 +- html/spiderFAQ_en-2.html | 27 ++-- html/spiderFAQ_en.html | 2 +- sgml/installation_en.sgml | 155 ++++++++++++--------- sgml/spiderFAQ_en.sgml | 30 ++-- txt/installation_en.txt | 266 ++++++++++++++++++++---------------- txt/spiderFAQ_en.txt | 50 +++---- 10 files changed, 386 insertions(+), 307 deletions(-) diff --git a/html/installation_en-1.html b/html/installation_en-1.html index 7108902f..c3427b57 100644 --- a/html/installation_en-1.html +++ b/html/installation_en-1.html @@ -43,20 +43,36 @@ perl distribution.

  • Data-Dumper-2.101.tar.gz this is included in perl 5.6.1 and above
  • -TimeDate-1.10.tar.gz
    • +TimeDate-2.27.tar.gz
  • IO-1.20.tar.gz (for perl 5.00403 and lower)
  • Net-Telnet-3.03.tar.gz
  • -Curses-1.06.tar.gz
    • +Curses-1.08a.tar.gz
  • -Time-HiRes-01.20.tar.gz
    • +Time-HiRes-01.20.tar.gz (for perl versions lower than 5.8 )
  • Digest-SHA1-2.01.tar.gz

    • +

    +On most modern distributions most (if not all) the modules you will need are either included or +can be loaded automatically. Please consult your distro's instructions for loading new programs +and look for modules that usually start with the string "perl-". For instance:-

    +

    +

    +

    + +

    Some distros are now packaging perl-DB_File separately as well, so you may have to add that to the list +above.

    +

    Copy the CPAN modules listed above to a convenient place on your computer. One good place would be /usr/local/packages, and the instructions which follow will assume that that's where you have put them.

    @@ -64,8 +80,8 @@ that's where you have put them.

    Log in as 'root', and make sure you're at '/root' before you continue. Here are exactly the commands you must issue next: -

    -# tar xvfz /usr/local/packages/TimeDate-1.10.tar.gz
-# cd TimeDate-1.10
+# tar xvfz /usr/local/packages/TimeDate-2.27.tar.gz
+# cd TimeDate-2.27
 # perl Makefile.PL
 # make test
 # make install
@@ -78,8 +94,8 @@ that's where you have put them.
    
 # make install
 # cd ..
 #
-# tar xvfz /usr/local/packages/Curses-1.06.tar.gz
-# cd Curses-1.06
+# tar xvfz /usr/local/packages/Curses-1.08a.tar.gz
+# cd Curses-1.08a
 # perl Makefile.PL
 # make test
 # make install
@@ -101,7 +117,7 @@ that's where you have put them.

    -

    Only if you need to do these (because your perl is old):-

    +

    Only if you need to do these because your perl is old:-

     #
diff --git a/html/installation_en-4.html b/html/installation_en-4.html
index 96ebacec..cfb04511 100644
--- a/html/installation_en-4.html
+++ b/html/installation_en-4.html
@@ -20,12 +20,75 @@
 
 
    This is dealt with in the previous section
    
 
-
    4.2 Allowing telnet connects from users 
+
    4.2 Setting up telnet connects (from 1.47 onwards)
+
    
+
+
    >From version 1.47 you can choose to allow the perl cluster.pl program to 
+allow connections directly (i.e. not via the /spider/src/client
+interface program). If you are using Windows then this is the only method
+available of allowing incoming telnet connections.
    
+
+
    to make the change happen...
    
+
+
    Having done that, you need to copy the file 
+/spider/perl/Listeners.pm to /spider/local and 
+then edit it. You will need to uncomment the line containing "0.0.0.0" 
+and select the correct port to listen on.
    
+
    It comes out of the box looking something like:-
    
+
    
+
    
+
    +@listen = (
+#    ["0.0.0.0", 7300],
+);
+
    
+
    
+
    
+
    Change it so that it looks like this:-
    
+
    
+
    
+
    +@listen = (
+    ["0.0.0.0", 7300],
+);
+
    
+
    
+
    
+
+
    Later versions have more comments in the Listeners.pm file that
+are designed to help you remove the correct '#' character.
    
+
+
    As standard, the listener will listen on all interfaces simultaneously. 
+If you require more control than this, you can specify each interface 
+individually:-
    
+
    
+
    
+
    +@listen = (
+    ["gb7baa.dxcluster.net", 7300],
+    ["44.131.16.2", 6300],
+);
+
    
+
    
+
    
+
+
    This will only be successful if the IP addresses on each interface are static. 
+If you are using some kind of dynamic IP addressing then the 'default' method 
+is the only one that will work.
    
+
+
    Restart the cluster.pl program to enable the listener.
    
+
+
    One important difference with the internal listener is that no echoing 
+is done by the cluster program. Users will need to set 'local-echo' on in 
+their telnet clients if it isn't set automatically (as per the standards). 
+Needless to say this will probably only apply to Windows users. 
    
+
+
    4.3 Allowing telnet connects from users (before version 1.47 or for special purposes)
 
    
 
 
     
 >From version 1.47 there is a new (more efficient) way of doing this
-(see next section) but, if you prefer, the method of doing it described 
+(see previous section) but, if you prefer, the method of doing it described 
 here will continue to work just fine.
    
 
 
    Allowing telnet connections is quite simple.  Firstly you need to add a line 
@@ -81,64 +144,6 @@ telnet localhost 8000
 
 
    You should now get the login prompt and be able to login as before.
    
 
-
    4.3 Setting up telnet connects (from 1.47 onwards)
-
    
-
-
    >From version 1.47 you can choose to allow the perl cluster.pl program to 
-allow connections directly (i.e. not via the /spider/src/client
-interface program). If you are using Windows then this is the only method
-available of allowing incoming telnet connections.
    
-
-
    To do this you need first to remove any line that you may previously have set
-up in /etc/inetd.conf. Remember to:-
    
-
    
-
    
-
    -killall -HUP inetd
-
    
-
    
-
    
-
-
    to make the change happen...
    
-
-
    Having done that, you need to copy the file 
-/spider/perl/Listeners.pm to /spider/local and 
-then edit it. You will need to uncomment the line containing "0.0.0.0" 
-and select the correct port to listen on. So that it looks like this:-
    
-
    
-
    
-
    -@listen = (
-    ["0.0.0.0", 8000],
-);
-
    
-
    
-
    
-
-
    As standard, the listener will listen on all interfaces simultaneously. 
-If you require more control than this, you can specify each interface 
-individually:-
    
-
    
-
    
-
    -@listen = (
-    ["gb7baa.dxcluster.net", 8000],
-    ["44.131.16.2", 6300],
-);
-
    
-
    
-
    
-
-
    This will only be successful if the IP addresses on each interface are static. 
-If you are using some kind of dynamic IP addressing then the 'default' method 
-is the only one that will work.
    
-
-
    Restart the cluster.pl program to enable the listener.
    
-
-
    One important difference with the internal listener is that no echoing 
-is done by the cluster program. Users will need to set 'local-echo' on in 
-their telnet clients if it isn't set automatically (as per the standards). 
-Needless to say this will probably only apply to Windows users. 
    
 
 
    4.4 Setting up for AGW Engine (1.47 onwards)
 
    
diff --git a/html/installation_en.html b/html/installation_en.html
index 31d730c7..156c8b50 100644
--- a/html/installation_en.html
+++ b/html/installation_en.html
@@ -55,8 +55,8 @@ Carroll, K1XX, (k1xx@ptcnh.net)March 2003 revision 0.7