mirror of
https://github.com/Hamlib/Hamlib.git
synced 2024-09-23 03:17:23 +00:00
463bc7ae3b
Icom users, who use the K9JM CI-V router to protect their PW-1 amplifiers from damage due to Icom's broken CI-V protocol handling, require a 1s delay after opening the serial port. This is due to the router using an Arduino & Arduino USB adapter that employs a bootloader which holds the RS-232 interface for 1s after reset (DTR releases reset). Hamlib already has a retry and timeout mechanism which was set to 3 and 200ms respectively for most Icom rigs. This change increses that timeout to 1s. The increaased timeout will have little or no impact on clients as it only comes into play if there is a problem.
232 lines
7.7 KiB
C
232 lines
7.7 KiB
C
/*
|
|
* Hamlib CI-V backend - description of IC-7410
|
|
* Copyright (c) 2011 by Stephane Fillod
|
|
*
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include "config.h"
|
|
#endif
|
|
|
|
#include <stdlib.h>
|
|
#include <string.h> /* String function definitions */
|
|
|
|
#include <hamlib/rig.h>
|
|
#include "token.h"
|
|
#include "idx_builtin.h"
|
|
|
|
#include "icom.h"
|
|
#include "icom_defs.h"
|
|
#include "frame.h"
|
|
#include "misc.h"
|
|
#include "bandplan.h"
|
|
|
|
#define IC7410_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB|RIG_MODE_PKTFM)
|
|
#define IC7410_AM_TX_MODES (RIG_MODE_AM)
|
|
#define IC7410_ALL_RX_MODES IC7410_OTHER_TX_MODES | IC7410_AM_TX_MODES
|
|
#define IC7410_1HZ_TS_MODES IC7410_ALL_RX_MODES
|
|
|
|
#define IC7410_FUNCS (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_NR|RIG_FUNC_MON|RIG_FUNC_MN|RIG_FUNC_ANF|RIG_FUNC_VSC|RIG_FUNC_LOCK)
|
|
|
|
#define IC7410_LEVELS (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_COMP|RIG_LEVEL_BKINDL|RIG_LEVEL_BALANCE|RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_RFPOWER|RIG_LEVEL_MICGAIN|RIG_LEVEL_KEYSPD|RIG_LEVEL_NOTCHF|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_VOXGAIN|RIG_LEVEL_VOXDELAY|RIG_LEVEL_SWR|RIG_LEVEL_ALC)
|
|
|
|
#define IC7410_VFOS (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
|
|
#define IC7410_PARMS (RIG_PARM_ANN|RIG_PARM_BACKLIGHT)
|
|
|
|
#define IC7410_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL|RIG_OP_TUNE)
|
|
#define IC7410_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_PROG|RIG_SCAN_DELTA|RIG_SCAN_PRIO)
|
|
|
|
#define IC7410_ANTS (RIG_ANT_1|RIG_ANT_2)
|
|
|
|
/*
|
|
* Guess from IC7600
|
|
*/
|
|
#define IC7410_STR_CAL { 16, \
|
|
{ \
|
|
{ 0, -54 }, /* S0 */ \
|
|
{ 124, 0 }, /* S9 */ \
|
|
{ 246, 60 } /* S9+60dB */ \
|
|
} }
|
|
|
|
|
|
/*
|
|
* IC-7410 rig capabilities.
|
|
*
|
|
* TODO: complete command set (esp. the $1A bunch!) and testing..
|
|
*/
|
|
static const struct icom_priv_caps ic7410_priv_caps = {
|
|
0x80, /* default address */
|
|
0, /* 731 mode */
|
|
0, /* no XCHG */
|
|
ic756pro_ts_sc_list
|
|
};
|
|
|
|
|
|
const struct rig_caps ic7410_caps = {
|
|
.rig_model = RIG_MODEL_IC7410,
|
|
.model_name = "IC-7410",
|
|
.mfg_name = "Icom",
|
|
.version = BACKEND_VER,
|
|
.copyright = "LGPL",
|
|
.status = RIG_STATUS_UNTESTED,
|
|
.rig_type = RIG_TYPE_TRANSCEIVER,
|
|
.ptt_type = RIG_PTT_RIG,
|
|
.dcd_type = RIG_DCD_RIG,
|
|
.port_type = RIG_PORT_SERIAL,
|
|
.serial_rate_min = 300,
|
|
.serial_rate_max = 19200,
|
|
.serial_data_bits = 8,
|
|
.serial_stop_bits = 1,
|
|
.serial_parity = RIG_PARITY_NONE,
|
|
.serial_handshake = RIG_HANDSHAKE_NONE,
|
|
.write_delay = 0,
|
|
.post_write_delay = 0,
|
|
.timeout = 1000,
|
|
.retry = 3,
|
|
.has_get_func = IC7410_FUNCS,
|
|
.has_set_func = IC7410_FUNCS,
|
|
.has_get_level = IC7410_LEVELS,
|
|
.has_set_level = RIG_LEVEL_SET(IC7410_LEVELS),
|
|
.has_get_parm = IC7410_PARMS,
|
|
.has_set_parm = RIG_PARM_SET(IC7410_PARMS), /* FIXME: parms */
|
|
.level_gran = {
|
|
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
|
|
},
|
|
.parm_gran = {},
|
|
.ctcss_list = common_ctcss_list,
|
|
.dcs_list = NULL,
|
|
.preamp = { 10, 20, RIG_DBLST_END, }, /* FIXME: TBC */
|
|
.attenuator = { 6, 12, 18, RIG_DBLST_END, },
|
|
.max_rit = Hz(9999),
|
|
.max_xit = Hz(9999),
|
|
.max_ifshift = Hz(0),
|
|
.targetable_vfo = 0,
|
|
.vfo_ops = IC7410_VFO_OPS,
|
|
.scan_ops = IC7410_SCAN_OPS,
|
|
.transceive = RIG_TRN_RIG,
|
|
.bank_qty = 0,
|
|
.chan_desc_sz = 0,
|
|
|
|
.chan_list = {
|
|
{ 1, 99, RIG_MTYPE_MEM },
|
|
{ 100, 101, RIG_MTYPE_EDGE }, /* two by two */
|
|
RIG_CHAN_END,
|
|
},
|
|
|
|
.rx_range_list1 = { {kHz(30),MHz(60),IC7410_ALL_RX_MODES,-1,-1,IC7410_VFOS,IC7410_ANTS},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list1 = {
|
|
FRQ_RNG_HF(1,IC7410_OTHER_TX_MODES, W(2),W(100),IC7410_VFOS,IC7410_ANTS),
|
|
FRQ_RNG_6m(1,IC7410_OTHER_TX_MODES, W(2),W(100),IC7410_VFOS,IC7410_ANTS),
|
|
FRQ_RNG_HF(1,IC7410_AM_TX_MODES, W(1),W(27),IC7410_VFOS,IC7410_ANTS), /* AM class */
|
|
FRQ_RNG_6m(1,IC7410_AM_TX_MODES, W(1),W(27),IC7410_VFOS,IC7410_ANTS), /* AM class */
|
|
RIG_FRNG_END, },
|
|
|
|
.rx_range_list2 = { {kHz(30),MHz(60),IC7410_ALL_RX_MODES,-1,-1,IC7410_VFOS,IC7410_ANTS},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list2 = {
|
|
FRQ_RNG_HF(2,IC7410_OTHER_TX_MODES, W(2),W(100),IC7410_VFOS,IC7410_ANTS),
|
|
FRQ_RNG_6m(2,IC7410_OTHER_TX_MODES, W(2),W(100),IC7410_VFOS,IC7410_ANTS),
|
|
FRQ_RNG_HF(2,IC7410_AM_TX_MODES, W(2),W(27),IC7410_VFOS,IC7410_ANTS), /* AM class */
|
|
FRQ_RNG_6m(2,IC7410_AM_TX_MODES, W(2),W(27),IC7410_VFOS,IC7410_ANTS), /* AM class */
|
|
/* USA only, TBC: end of range and modes */
|
|
{MHz(5.33050),MHz(5.33350),IC7410_OTHER_TX_MODES,W(2),W(100),IC7410_VFOS,IC7410_ANTS}, /* USA only */
|
|
{MHz(5.34650),MHz(5.34950),IC7410_OTHER_TX_MODES,W(2),W(100),IC7410_VFOS,IC7410_ANTS}, /* USA only */
|
|
{MHz(5.36650),MHz(5.36950),IC7410_OTHER_TX_MODES,W(2),W(100),IC7410_VFOS,IC7410_ANTS}, /* USA only */
|
|
{MHz(5.37150),MHz(5.37450),IC7410_OTHER_TX_MODES,W(2),W(100),IC7410_VFOS,IC7410_ANTS}, /* USA only */
|
|
{MHz(5.40350),MHz(5.40650),IC7410_OTHER_TX_MODES,W(2),W(100),IC7410_VFOS,IC7410_ANTS}, /* USA only */
|
|
RIG_FRNG_END, },
|
|
|
|
.tuning_steps = {
|
|
{IC7410_1HZ_TS_MODES,1},
|
|
{IC7410_ALL_RX_MODES,Hz(100)},
|
|
{IC7410_ALL_RX_MODES,kHz(1)},
|
|
{IC7410_ALL_RX_MODES,kHz(5)},
|
|
{IC7410_ALL_RX_MODES,kHz(9)},
|
|
{IC7410_ALL_RX_MODES,kHz(10)},
|
|
{IC7410_ALL_RX_MODES,kHz(12.5)},
|
|
{IC7410_ALL_RX_MODES,kHz(20)},
|
|
{IC7410_ALL_RX_MODES,kHz(25)},
|
|
RIG_TS_END,
|
|
},
|
|
/* mode/filter list, remember: order matters! */
|
|
.filters = {
|
|
{RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR, kHz(2.4)},
|
|
{RIG_MODE_CW|RIG_MODE_CWR, Hz(500)},
|
|
{RIG_MODE_CW|RIG_MODE_CWR, Hz(350)},
|
|
{RIG_MODE_AM, kHz(6)},
|
|
{RIG_MODE_AM, kHz(2.4)},
|
|
{RIG_MODE_FM, kHz(12)},
|
|
{RIG_MODE_FM, kHz(8)}, /* TBC */
|
|
RIG_FLT_END,
|
|
},
|
|
.str_cal = IC7410_STR_CAL,
|
|
|
|
.cfgparams = icom_cfg_params,
|
|
.set_conf = icom_set_conf,
|
|
.get_conf = icom_get_conf,
|
|
|
|
.priv = (void*)&ic7410_priv_caps,
|
|
.rig_init = icom_init,
|
|
.rig_cleanup = icom_cleanup,
|
|
.rig_open = NULL,
|
|
.rig_close = NULL,
|
|
|
|
.set_freq = icom_set_freq,
|
|
.get_freq = icom_get_freq,
|
|
.set_mode = icom_set_mode_with_data,
|
|
.get_mode = icom_get_mode_with_data,
|
|
.set_vfo = icom_set_vfo,
|
|
.set_ant = icom_set_ant,
|
|
.get_ant = icom_get_ant,
|
|
|
|
.set_rit = icom_set_rit,
|
|
|
|
.decode_event = icom_decode_event,
|
|
.set_level = icom_set_level,
|
|
.get_level = icom_get_level,
|
|
.set_func = icom_set_func,
|
|
.get_func = icom_get_func,
|
|
.set_parm = icom_set_parm,
|
|
.get_parm = icom_get_parm,
|
|
.set_mem = icom_set_mem,
|
|
.vfo_op = icom_vfo_op,
|
|
.scan = icom_scan,
|
|
.set_ptt = icom_set_ptt,
|
|
.get_ptt = icom_get_ptt,
|
|
.get_dcd = icom_get_dcd,
|
|
.set_ts = icom_set_ts,
|
|
.get_ts = icom_get_ts,
|
|
.set_rptr_shift = icom_set_rptr_shift,
|
|
.get_rptr_shift = icom_get_rptr_shift,
|
|
.set_rptr_offs = icom_set_rptr_offs,
|
|
.get_rptr_offs = icom_get_rptr_offs,
|
|
.set_ctcss_tone = icom_set_ctcss_tone,
|
|
.get_ctcss_tone = icom_get_ctcss_tone,
|
|
.set_ctcss_sql = icom_set_ctcss_sql,
|
|
.get_ctcss_sql = icom_get_ctcss_sql,
|
|
.set_split_freq = icom_set_split_freq,
|
|
.get_split_freq = icom_get_split_freq,
|
|
.set_split_mode = icom_set_split_mode,
|
|
.get_split_mode = icom_get_split_mode,
|
|
.set_split_vfo = icom_set_split_vfo,
|
|
.get_split_vfo = icom_mem_get_split_vfo,
|
|
|
|
};
|
|
|