mirror of
https://github.com/Hamlib/Hamlib.git
synced 2024-09-23 11:27:25 +00:00
463bc7ae3b
Icom users, who use the K9JM CI-V router to protect their PW-1 amplifiers from damage due to Icom's broken CI-V protocol handling, require a 1s delay after opening the serial port. This is due to the router using an Arduino & Arduino USB adapter that employs a bootloader which holds the RS-232 interface for 1s after reset (DTR releases reset). Hamlib already has a retry and timeout mechanism which was set to 3 and 200ms respectively for most Icom rigs. This change increses that timeout to 1s. The increaased timeout will have little or no impact on clients as it only comes into play if there is a problem.
225 lines
7.7 KiB
C
225 lines
7.7 KiB
C
/*
|
|
* Hamlib CI-V backend - description of IC-751 and variations
|
|
* Copyright (c) 2000-2010 by Stephane Fillod
|
|
*
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include "config.h"
|
|
#endif
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include "hamlib/rig.h"
|
|
#include "bandplan.h"
|
|
#include "icom.h"
|
|
#include "idx_builtin.h"
|
|
|
|
/*
|
|
* FM is an option on the Icom IC-751, and built-in in the Icom IC-751A
|
|
*/
|
|
#define IC751_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM)
|
|
|
|
/*
|
|
* 200W in all modes but AM (40W)
|
|
*/
|
|
#define IC751_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM)
|
|
#define IC751_AM_TX_MODES (RIG_MODE_AM)
|
|
|
|
#define IC751_VFO_ALL (RIG_VFO_A|RIG_VFO_MEM)
|
|
|
|
#define IC751_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO)
|
|
|
|
#define IC751_SCAN_OPS (RIG_SCAN_NONE)
|
|
|
|
#define IC751_ANTS RIG_ANT_1
|
|
|
|
/*
|
|
* S-Meter measurements
|
|
* (Only the Piexx UX-14px rev.2 and up has an S-meter option.)
|
|
* Values based on the readings of my IC-751A S-meter, i.e. not
|
|
* actual signal strength. -- Lars, sm6rpz
|
|
*/
|
|
#define IC751_STR_CAL { 16, { \
|
|
{ 3, -52 }, /* S0.5 */ \
|
|
{ 12, -48 }, /* S1 */ \
|
|
{ 33, -42 }, /* S2 */ \
|
|
{ 45, -36 }, /* S3 */ \
|
|
{ 60, -30 }, /* S4 */ \
|
|
{ 73, -24 }, /* S5 */ \
|
|
{ 86, -18 }, /* S6 */ \
|
|
{ 100, -12 }, /* S7 */ \
|
|
{ 115, -6 }, /* S8 */ \
|
|
{ 129, 0 }, /* S9 */ \
|
|
{ 160, 10 }, /* S9+10 */ \
|
|
{ 186, 20 }, /* S9+20 */ \
|
|
{ 208, 30 }, /* S9+30 */ \
|
|
{ 226, 40 }, /* S9+40 */ \
|
|
{ 241, 50 }, /* S9+50 */ \
|
|
{ 255, 60 } /* S9+60 */ \
|
|
} }
|
|
|
|
/*
|
|
*/
|
|
static const struct icom_priv_caps ic751_priv_caps = {
|
|
0x1c, /* default address */
|
|
0, /* 731 mode */
|
|
0, /* no XCHG */
|
|
ic737_ts_sc_list
|
|
};
|
|
|
|
const struct rig_caps ic751_caps = {
|
|
.rig_model = RIG_MODEL_IC751,
|
|
.model_name = "IC-751",
|
|
.mfg_name = "Icom",
|
|
.version = BACKEND_VER ".1",
|
|
.copyright = "LGPL",
|
|
.status = RIG_STATUS_BETA,
|
|
.rig_type = RIG_TYPE_TRANSCEIVER,
|
|
.ptt_type = RIG_PTT_RIG, /* Piexx UX-14px has a PTT option */
|
|
.dcd_type = RIG_DCD_NONE,
|
|
.port_type = RIG_PORT_SERIAL,
|
|
.serial_rate_min = 1200,
|
|
.serial_rate_max = 9600, /* Piexx UX-14px can use 9600 */
|
|
.serial_data_bits = 8,
|
|
.serial_stop_bits = 1,
|
|
.serial_parity = RIG_PARITY_NONE,
|
|
.serial_handshake = RIG_HANDSHAKE_NONE,
|
|
.write_delay = 0,
|
|
.post_write_delay = 0,
|
|
.timeout = 1000,
|
|
.retry = 3,
|
|
.has_get_func = RIG_FUNC_NONE,
|
|
.has_set_func = RIG_FUNC_NONE,
|
|
/* Piexx UX-14px has an S-meter option */
|
|
.has_get_level = (RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH),
|
|
.has_set_level = RIG_LEVEL_NONE,
|
|
.has_get_parm = RIG_PARM_NONE,
|
|
.has_set_parm = RIG_PARM_NONE,
|
|
.level_gran = {
|
|
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
|
|
},
|
|
.parm_gran = {},
|
|
.ctcss_list = NULL,
|
|
.dcs_list = NULL,
|
|
.preamp = { RIG_DBLST_END, },
|
|
.attenuator = { RIG_DBLST_END, },
|
|
.max_rit = Hz(0),
|
|
.max_xit = Hz(0),
|
|
.max_ifshift = Hz(0),
|
|
.targetable_vfo = 0,
|
|
.vfo_ops = IC751_VFO_OPS,
|
|
.scan_ops = IC751_SCAN_OPS,
|
|
.transceive = RIG_TRN_RIG,
|
|
.bank_qty = 0,
|
|
.chan_desc_sz = 0,
|
|
|
|
.chan_list = {
|
|
{ 1, 32, RIG_MTYPE_MEM, IC_MIN_MEM_CAP },
|
|
RIG_CHAN_END,
|
|
},
|
|
|
|
.rx_range_list1 = {
|
|
{kHz(100),MHz(30),IC751_ALL_RX_MODES,-1,-1,IC751_VFO_ALL},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list1 = {
|
|
{MHz(1.8),MHz(1.99999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL}, /* 100W class */
|
|
{MHz(1.8),MHz(1.99999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL}, /* 40W class */
|
|
{MHz(3.45),MHz(4.09999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
|
|
{MHz(3.45),MHz(4.09999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
|
|
{MHz(6.95),MHz(7.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
|
|
{MHz(6.95),MHz(7.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
|
|
{MHz(9.95),MHz(10.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
|
|
{MHz(9.95),MHz(10.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
|
|
{MHz(13.95),MHz(14.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
|
|
{MHz(13.95),MHz(14.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
|
|
{MHz(17.95),MHz(18.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
|
|
{MHz(17.95),MHz(18.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
|
|
{MHz(20.95),MHz(21.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
|
|
{MHz(20.95),MHz(21.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
|
|
{MHz(24.45),MHz(25.09999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
|
|
{MHz(24.45),MHz(25.09999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
|
|
{MHz(27.95),MHz(30),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
|
|
{MHz(27.95),MHz(30),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
|
|
RIG_FRNG_END, },
|
|
|
|
.rx_range_list2 = {
|
|
{kHz(100),MHz(30),IC751_ALL_RX_MODES,-1,-1,IC751_VFO_ALL},
|
|
RIG_FRNG_END, },
|
|
/* weird transmit ranges ... --sf */
|
|
.tx_range_list2 = {
|
|
{MHz(1.8),MHz(1.99999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL}, /* 100W class */
|
|
{MHz(1.8),MHz(1.99999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL}, /* 40W class */
|
|
{MHz(3.45),MHz(4.09999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
|
|
{MHz(3.45),MHz(4.09999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
|
|
{MHz(6.95),MHz(7.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
|
|
{MHz(6.95),MHz(7.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
|
|
{MHz(9.95),MHz(10.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
|
|
{MHz(9.95),MHz(10.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
|
|
{MHz(13.95),MHz(14.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
|
|
{MHz(13.95),MHz(14.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
|
|
{MHz(17.95),MHz(18.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
|
|
{MHz(17.95),MHz(18.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
|
|
{MHz(20.95),MHz(21.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
|
|
{MHz(20.95),MHz(21.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
|
|
{MHz(24.45),MHz(25.09999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
|
|
{MHz(24.45),MHz(25.09999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
|
|
{MHz(27.95),MHz(30),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
|
|
{MHz(27.95),MHz(30),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
|
|
RIG_FRNG_END, },
|
|
|
|
.tuning_steps = {
|
|
{IC751_ALL_RX_MODES,10}, /* basic resolution, there's no set_ts */
|
|
RIG_TS_END,
|
|
},
|
|
/* mode/filter list, remember: order matters! */
|
|
.filters = {
|
|
{RIG_MODE_SSB, kHz(2.3)},
|
|
{RIG_MODE_RTTY|RIG_MODE_CW, Hz(500)},
|
|
{RIG_MODE_RTTY|RIG_MODE_CW, Hz(250)},
|
|
{RIG_MODE_AM, kHz(6)},
|
|
{RIG_MODE_FM, kHz(15)},
|
|
RIG_FLT_END,
|
|
},
|
|
|
|
.str_cal = IC751_STR_CAL,
|
|
|
|
.cfgparams = icom_cfg_params,
|
|
.set_conf = icom_set_conf,
|
|
.get_conf = icom_get_conf,
|
|
|
|
.priv = (void*)&ic751_priv_caps,
|
|
.rig_init = icom_init,
|
|
.rig_cleanup = icom_cleanup,
|
|
.rig_open = NULL,
|
|
.rig_close = NULL,
|
|
|
|
.set_freq = icom_set_freq,
|
|
.get_freq = icom_get_freq,
|
|
.set_mode = icom_set_mode,
|
|
.get_mode = icom_get_mode,
|
|
.set_vfo = icom_set_vfo,
|
|
|
|
.decode_event = icom_decode_event,
|
|
.set_mem = icom_set_mem,
|
|
.vfo_op = icom_vfo_op,
|
|
|
|
.get_level = icom_get_level,
|
|
.set_ptt = icom_set_ptt,/* Piexx UX-14px has no get_ptt only set_ptt */
|
|
};
|