mirror of
https://github.com/Hamlib/Hamlib.git
synced 2024-09-22 02:47:21 +00:00
463bc7ae3b
Icom users, who use the K9JM CI-V router to protect their PW-1 amplifiers from damage due to Icom's broken CI-V protocol handling, require a 1s delay after opening the serial port. This is due to the router using an Arduino & Arduino USB adapter that employs a bootloader which holds the RS-232 interface for 1s after reset (DTR releases reset). Hamlib already has a retry and timeout mechanism which was set to 3 and 200ms respectively for most Icom rigs. This change increses that timeout to 1s. The increaased timeout will have little or no impact on clients as it only comes into play if there is a problem.
225 lines
6.8 KiB
C
225 lines
6.8 KiB
C
/*
|
|
* Hamlib CI-V backend - description of IC-703
|
|
* Copyright (c) 2000-2010 by Stephane Fillod
|
|
*
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include "config.h"
|
|
#endif
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include "hamlib/rig.h"
|
|
#include "icom.h"
|
|
#include "bandplan.h"
|
|
#include "idx_builtin.h"
|
|
|
|
#define IC703_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
|
|
|
|
#define IC703_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
|
|
#define IC703_AM_TX_MODES (RIG_MODE_AM)
|
|
|
|
#define IC703_FUNC_ALL (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_NR|RIG_FUNC_ANF|RIG_FUNC_MON)
|
|
|
|
#define IC703_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_RAWSTR|RIG_LEVEL_ALC|RIG_LEVEL_SWR|RIG_LEVEL_METER|RIG_LEVEL_COMP|RIG_LEVEL_RF|RIG_LEVEL_RFPOWER|RIG_LEVEL_MICGAIN|RIG_LEVEL_RF|RIG_LEVEL_AF|RIG_LEVEL_SQL|RIG_LEVEL_NR|RIG_LEVEL_IF|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT)
|
|
|
|
#define IC703_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
|
|
|
|
#define IC703_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
|
|
#define IC703_SCAN_OPS (RIG_SCAN_VFO|RIG_SCAN_MEM)
|
|
|
|
#define IC703_ANTS (RIG_ANT_1)
|
|
|
|
/*
|
|
* IC703_REAL_STR_CAL is accurate measurements
|
|
* IC703_STR_CAL is what the S-meter displays
|
|
*
|
|
* FIXME: calibration data cloned from IC706
|
|
*/
|
|
#define IC703_STR_CAL { 17, \
|
|
{ \
|
|
{ 45, -60 }, \
|
|
{ 46, -54 }, /* S0 */ \
|
|
{ 54, -48 }, \
|
|
{ 64, -42 }, \
|
|
{ 76, -36 }, \
|
|
{ 84, -30 }, \
|
|
{ 94, -24 }, \
|
|
{ 104, -18 }, \
|
|
{ 113, -12 }, \
|
|
{ 123, -6 }, \
|
|
{ 133, 0 }, /* S9 */ \
|
|
{ 144, 10 }, /* +10 */ \
|
|
{ 156, 20 }, /* +20 */ \
|
|
{ 170, 30 }, /* +30 */ \
|
|
{ 181, 40 }, /* +40 */ \
|
|
{ 192, 50 }, /* +50 */ \
|
|
{ 204, 60 } /* +60 */ \
|
|
} }
|
|
|
|
/*
|
|
* ic703 rigs capabilities.
|
|
*/
|
|
static const struct icom_priv_caps ic703_priv_caps = {
|
|
0x68, /* default address */
|
|
0, /* 731 mode */
|
|
0, /* no XCHG */
|
|
ic706_ts_sc_list
|
|
};
|
|
|
|
const struct rig_caps ic703_caps = {
|
|
.rig_model = RIG_MODEL_IC703,
|
|
.model_name = "IC-703",
|
|
.mfg_name = "Icom",
|
|
.version = BACKEND_VER,
|
|
.copyright = "LGPL",
|
|
.status = RIG_STATUS_UNTESTED,
|
|
.rig_type = RIG_TYPE_MOBILE,
|
|
.ptt_type = RIG_PTT_NONE,
|
|
.dcd_type = RIG_DCD_RIG,
|
|
.port_type = RIG_PORT_SERIAL,
|
|
.serial_rate_min = 300,
|
|
.serial_rate_max = 19200,
|
|
.serial_data_bits = 8,
|
|
.serial_stop_bits = 1,
|
|
.serial_parity = RIG_PARITY_NONE,
|
|
.serial_handshake = RIG_HANDSHAKE_NONE,
|
|
.write_delay = 0,
|
|
.post_write_delay = 0,
|
|
.timeout = 1000,
|
|
.retry = 3,
|
|
.has_get_func = IC703_FUNC_ALL,
|
|
.has_set_func = IC703_FUNC_ALL,
|
|
.has_get_level = IC703_LEVEL_ALL,
|
|
.has_set_level = RIG_LEVEL_SET(IC703_LEVEL_ALL),
|
|
.has_get_parm = RIG_PARM_NONE,
|
|
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
|
|
.level_gran = {
|
|
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
|
|
},
|
|
.parm_gran = {},
|
|
.ctcss_list = common_ctcss_list,
|
|
.dcs_list = NULL,
|
|
.preamp = { 10, 20, RIG_DBLST_END, }, /* FIXME: 2 levels */
|
|
.attenuator = { 20, RIG_DBLST_END, },
|
|
.max_rit = Hz(0),
|
|
.max_xit = Hz(0),
|
|
.max_ifshift = Hz(0),
|
|
.targetable_vfo = 0,
|
|
.vfo_ops = IC703_VFO_OPS,
|
|
.scan_ops = IC703_SCAN_OPS,
|
|
.transceive = RIG_TRN_RIG,
|
|
.bank_qty = 0,
|
|
.chan_desc_sz = 0,
|
|
|
|
.chan_list = {
|
|
{ 1, 99, RIG_MTYPE_MEM },
|
|
{ 100, 105, RIG_MTYPE_EDGE }, /* two by two */
|
|
{ 106, 107, RIG_MTYPE_CALL },
|
|
RIG_CHAN_END,
|
|
},
|
|
|
|
.rx_range_list1 = {
|
|
{kHz(30),MHz(60),IC703_ALL_RX_MODES,-1,-1,IC703_VFO_ALL,IC703_ANTS},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list1 = {
|
|
FRQ_RNG_HF(1,IC703_OTHER_TX_MODES, W(0.1),W(10),IC703_VFO_ALL,IC703_ANTS),
|
|
FRQ_RNG_6m(1,IC703_OTHER_TX_MODES, W(0.1),W(10),IC703_VFO_ALL,IC703_ANTS),
|
|
FRQ_RNG_HF(1,IC703_AM_TX_MODES, W(0.1),W(4),IC703_VFO_ALL,IC703_ANTS), /* AM class */
|
|
FRQ_RNG_6m(1,IC703_AM_TX_MODES, W(0.1),W(4),IC703_VFO_ALL,IC703_ANTS), /* AM class */
|
|
RIG_FRNG_END,
|
|
},
|
|
|
|
.rx_range_list2 = {
|
|
{kHz(30),MHz(60),IC703_ALL_RX_MODES,-1,-1,IC703_VFO_ALL,IC703_ANTS},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list2 = {
|
|
FRQ_RNG_HF(2,IC703_OTHER_TX_MODES, W(0.1),W(10),IC703_VFO_ALL,IC703_ANTS),
|
|
FRQ_RNG_6m(2,IC703_OTHER_TX_MODES, W(0.1),W(10),IC703_VFO_ALL,IC703_ANTS),
|
|
FRQ_RNG_HF(2,IC703_AM_TX_MODES, W(0.1),W(4),IC703_VFO_ALL,IC703_ANTS), /* AM class */
|
|
FRQ_RNG_6m(2,IC703_AM_TX_MODES, W(0.1),W(4),IC703_VFO_ALL,IC703_ANTS), /* AM class */
|
|
RIG_FRNG_END,
|
|
},
|
|
|
|
|
|
.tuning_steps = {
|
|
{IC703_ALL_RX_MODES,10},
|
|
{IC703_ALL_RX_MODES,100},
|
|
{IC703_ALL_RX_MODES,kHz(1)},
|
|
{IC703_ALL_RX_MODES,kHz(5)},
|
|
{IC703_ALL_RX_MODES,kHz(9)},
|
|
{IC703_ALL_RX_MODES,kHz(10)},
|
|
{IC703_ALL_RX_MODES,12500},
|
|
{IC703_ALL_RX_MODES,kHz(20)},
|
|
{IC703_ALL_RX_MODES,kHz(25)},
|
|
{IC703_ALL_RX_MODES,kHz(100)},
|
|
RIG_TS_END,
|
|
},
|
|
/* mode/filter list, remember: order matters! */
|
|
.filters = {
|
|
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_CWR|RIG_MODE_RTTYR, kHz(2.4)}, /* bultin FL-272 */
|
|
{RIG_MODE_AM, kHz(9)}, /* mid w/ bultin FL-94 */
|
|
{RIG_MODE_AM, kHz(2.4)}, /* narrow w/ bultin FL-272 */
|
|
{RIG_MODE_FM, kHz(15)}, /* ?? TBC, mid w/ bultin FL-23+SFPC455E */
|
|
{RIG_MODE_FM, kHz(9)}, /* narrow w/ bultin FL-94 */
|
|
RIG_FLT_END,
|
|
},
|
|
.str_cal = IC703_STR_CAL,
|
|
|
|
.cfgparams = icom_cfg_params,
|
|
.set_conf = icom_set_conf,
|
|
.get_conf = icom_get_conf,
|
|
|
|
.priv = (void*)&ic703_priv_caps,
|
|
.rig_init = icom_init,
|
|
.rig_cleanup = icom_cleanup,
|
|
.rig_open = NULL,
|
|
.rig_close = NULL,
|
|
|
|
.set_freq = icom_set_freq,
|
|
.get_freq = icom_get_freq,
|
|
.set_mode = icom_set_mode,
|
|
.get_mode = icom_get_mode,
|
|
.set_vfo = icom_set_vfo,
|
|
|
|
.decode_event = icom_decode_event,
|
|
.set_level = icom_set_level,
|
|
.get_level = icom_get_level,
|
|
.set_func = icom_set_func,
|
|
.get_func = icom_get_func,
|
|
.set_mem = icom_set_mem,
|
|
.vfo_op = icom_vfo_op,
|
|
.scan = icom_scan,
|
|
.set_ptt = icom_set_ptt,
|
|
.get_ptt = icom_get_ptt,
|
|
.get_dcd = icom_get_dcd,
|
|
.set_ts = icom_set_ts,
|
|
.set_rptr_shift = icom_set_rptr_shift,
|
|
.set_rptr_offs = icom_set_rptr_offs,
|
|
.get_rptr_offs = icom_get_rptr_offs,
|
|
.set_split_freq = icom_set_split_freq,
|
|
.get_split_freq = icom_get_split_freq,
|
|
.set_split_mode = icom_set_split_mode,
|
|
.get_split_mode = icom_get_split_mode,
|
|
.set_split_vfo = icom_set_split_vfo,
|
|
|
|
};
|
|
|
|
|