mirror of
https://github.com/Hamlib/Hamlib.git
synced 2024-09-22 02:47:21 +00:00
463bc7ae3b
Icom users, who use the K9JM CI-V router to protect their PW-1 amplifiers from damage due to Icom's broken CI-V protocol handling, require a 1s delay after opening the serial port. This is due to the router using an Arduino & Arduino USB adapter that employs a bootloader which holds the RS-232 interface for 1s after reset (DTR releases reset). Hamlib already has a retry and timeout mechanism which was set to 3 and 200ms respectively for most Icom rigs. This change increses that timeout to 1s. The increaased timeout will have little or no impact on clients as it only comes into play if there is a problem.
152 lines
3.9 KiB
C
152 lines
3.9 KiB
C
/*
|
|
* Hamlib CI-V backend - description of IC-R10
|
|
* Copyright (c) 2000-2004 by Stephane Fillod
|
|
*
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include "config.h"
|
|
#endif
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include "hamlib/rig.h"
|
|
#include "icom.h"
|
|
#include "idx_builtin.h"
|
|
|
|
#define ICR10_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_WFM)
|
|
|
|
#define ICR10_FUNC_ALL (RIG_FUNC_NONE)
|
|
|
|
#define ICR10_LEVEL_ALL (RIG_LEVEL_RAWSTR)
|
|
|
|
#define ICR10_VFO_ALL (RIG_VFO_A)
|
|
|
|
#define ICR10_VFO_OPS (RIG_OP_NONE)
|
|
#define ICR10_SCAN_OPS (RIG_SCAN_NONE)
|
|
|
|
/*
|
|
* FIXME: S-meter measurement
|
|
*/
|
|
#define ICR10_STR_CAL UNKNOWN_IC_STR_CAL
|
|
|
|
static const struct icom_priv_caps icr10_priv_caps = {
|
|
0x52, /* default address */
|
|
0, /* 731 mode */
|
|
0, /* no XCHG */
|
|
r8500_ts_sc_list /* wrong, but don't have set_ts anyway */
|
|
};
|
|
|
|
const struct rig_caps icr10_caps = {
|
|
.rig_model = RIG_MODEL_ICR10,
|
|
.model_name = "IC-R10",
|
|
.mfg_name = "Icom",
|
|
.version = BACKEND_VER,
|
|
.copyright = "LGPL",
|
|
.status = RIG_STATUS_UNTESTED,
|
|
.rig_type = RIG_TYPE_RECEIVER|RIG_FLAG_HANDHELD,
|
|
.ptt_type = RIG_PTT_NONE,
|
|
.dcd_type = RIG_DCD_RIG,
|
|
.port_type = RIG_PORT_SERIAL,
|
|
.serial_rate_min = 300,
|
|
.serial_rate_max = 19200,
|
|
.serial_data_bits = 8,
|
|
.serial_stop_bits = 1,
|
|
.serial_parity = RIG_PARITY_NONE,
|
|
.serial_handshake = RIG_HANDSHAKE_NONE,
|
|
.write_delay = 0,
|
|
.post_write_delay = 0,
|
|
.timeout = 1000,
|
|
.retry = 3,
|
|
.has_get_func = ICR10_FUNC_ALL,
|
|
.has_set_func = ICR10_FUNC_ALL,
|
|
.has_get_level = ICR10_LEVEL_ALL,
|
|
.has_set_level = RIG_LEVEL_SET(ICR10_LEVEL_ALL),
|
|
.has_get_parm = RIG_PARM_NONE,
|
|
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
|
|
.level_gran = {
|
|
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
|
|
},
|
|
.parm_gran = {},
|
|
.ctcss_list = NULL,
|
|
.dcs_list = NULL,
|
|
.preamp = { RIG_DBLST_END, },
|
|
.attenuator = { RIG_DBLST_END, },
|
|
.max_rit = Hz(0),
|
|
.max_xit = Hz(0),
|
|
.max_ifshift = Hz(0),
|
|
.targetable_vfo = 0,
|
|
.vfo_ops = ICR10_VFO_OPS,
|
|
.scan_ops = ICR10_SCAN_OPS,
|
|
.transceive = RIG_TRN_RIG,
|
|
.bank_qty = 0,
|
|
.chan_desc_sz = 0,
|
|
|
|
.chan_list = {
|
|
RIG_CHAN_END,
|
|
},
|
|
|
|
.rx_range_list1 = {
|
|
{kHz(500),GHz(1.3),ICR10_MODES,-1,-1,ICR10_VFO_ALL},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list1 = { RIG_FRNG_END, },
|
|
|
|
.rx_range_list2 = {
|
|
{kHz(500),MHz(823.9999),ICR10_MODES,-1,-1,ICR10_VFO_ALL},
|
|
{MHz(849),MHz(868.9999),ICR10_MODES,-1,-1,ICR10_VFO_ALL},
|
|
{MHz(894),GHz(1.3),ICR10_MODES,-1,-1,ICR10_VFO_ALL},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list2 = { RIG_FRNG_END, },
|
|
|
|
.tuning_steps = {
|
|
{ICR10_MODES,Hz(100)},
|
|
RIG_TS_END,
|
|
},
|
|
/* mode/filter list, remember: order matters! */
|
|
.filters = {
|
|
{RIG_MODE_SSB|RIG_MODE_CW, kHz(4)},
|
|
{RIG_MODE_AM|RIG_MODE_FM, kHz(15)},
|
|
{RIG_MODE_WFM, kHz(150)},
|
|
RIG_FLT_END,
|
|
},
|
|
.str_cal = ICR10_STR_CAL,
|
|
|
|
.cfgparams = icom_cfg_params,
|
|
.set_conf = icom_set_conf,
|
|
.get_conf = icom_get_conf,
|
|
|
|
.priv = (void*)&icr10_priv_caps,
|
|
.rig_init = icom_init,
|
|
.rig_cleanup = icom_cleanup,
|
|
.rig_open = NULL,
|
|
.rig_close = NULL,
|
|
|
|
.set_freq = icom_set_freq,
|
|
.get_freq = icom_get_freq,
|
|
.set_mode = icom_set_mode, /* TODO: do not pass bandwidth data */
|
|
.get_mode = icom_get_mode,
|
|
/* .set_vfo = icom_set_vfo, */
|
|
|
|
.decode_event = icom_decode_event,
|
|
.get_level = icom_get_level,
|
|
.get_dcd = icom_get_dcd,
|
|
|
|
};
|
|
|
|
|