hamradio/Hamlib
1
0
Fork 0
mirror of https://github.com/Hamlib/Hamlib.git synced 2024-09-22 02:47:21 +00:00
Code Issues Packages Projects Releases Wiki Activity
bd7510315e
Hamlib/icom/ic7800.c
Bill Somerville 463bc7ae3b Increase communications timeout for Icom rigs 
Icom  users, who  use  the  K9JM CI-V  router  to  protect their  PW-1
amplifiers from  damage due to  Icom's broken CI-V  protocol handling,
require a 1s delay  after opening the serial port. This  is due to the
router  using  an  Arduino  &  Arduino  USB  adapter  that  employs  a
bootloader which  holds the RS-232  interface for 1s after  reset (DTR
releases reset).   Hamlib already  has a  retry and  timeout mechanism
which was  set to 3 and  200ms respectively for most  Icom rigs.  This
change increses that  timeout to 1s. The increaased  timeout will have
little or no impact on clients as  it only comes into play if there is
a problem.
2014-12-08 12:23:06 +00:00

281 lines
8.9 KiB
C
Raw Blame History

/*
* Hamlib CI-V backend - description of IC-7800 and variations
* Copyright (c) 2009-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <string.h> /* String function definitions */
#include <hamlib/rig.h>
#include "token.h"
#include "idx_builtin.h"
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
#include "misc.h"
#include "bandplan.h"
/*
* TODO: PSK and PSKR
*/
#define IC7800_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
#define IC7800_1HZ_TS_MODES IC7800_ALL_RX_MODES
#define IC7800_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
#define IC7800_AM_TX_MODES (RIG_MODE_AM)
#define IC7800_FUNCS (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_NR|RIG_FUNC_MON|RIG_FUNC_MN|RIG_FUNC_ANF|RIG_FUNC_VSC|RIG_FUNC_LOCK)
#define IC7800_LEVELS (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_COMP|RIG_LEVEL_BKINDL|RIG_LEVEL_BALANCE|RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_RFPOWER|RIG_LEVEL_MICGAIN|RIG_LEVEL_KEYSPD|RIG_LEVEL_NOTCHF|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_APF|RIG_LEVEL_VOXGAIN|RIG_LEVEL_VOXDELAY|RIG_LEVEL_SWR|RIG_LEVEL_ALC)
#define IC7800_VFOS (RIG_VFO_MAIN|RIG_VFO_SUB|RIG_VFO_MEM)
#define IC7800_PARMS (RIG_PARM_ANN|RIG_PARM_BACKLIGHT)
#define IC7800_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL|RIG_OP_TUNE)
#define IC7800_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_PROG|RIG_SCAN_DELTA|RIG_SCAN_PRIO)
#define IC7800_ANTS (RIG_ANT_1|RIG_ANT_2|RIG_ANT_3|RIG_ANT_4)
/*
* FIXME: real measures!
*/
#define IC7800_STR_CAL { 3, \
{ \
{ 0, -54 }, /* S0 */ \
{ 120, 0 }, /* S9 */ \
{ 241, 60 } /* S9+60 */ \
} }
static int ic7800_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val);
static int ic7800_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val);
/*
* IC-7800 rig capabilities.
*
* TODO: complete command set (esp. the $1A bunch!) and testing..
*/
static const struct icom_priv_caps ic7800_priv_caps = {
0x6a, /* default address */
0, /* 731 mode */
0, /* no XCHG */
ic756pro_ts_sc_list
};
const struct rig_caps ic7800_caps = {
.rig_model = RIG_MODEL_IC7800,
.model_name = "IC-7800",
.mfg_name = "Icom",
.version = BACKEND_VER ".2",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = IC7800_FUNCS,
.has_set_func = IC7800_FUNCS,
.has_get_level = IC7800_LEVELS,
.has_set_level = RIG_LEVEL_SET(IC7800_LEVELS),
.has_get_parm = IC7800_PARMS,
.has_set_parm = RIG_PARM_SET(IC7800_PARMS), /* FIXME: parms */
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, 20, RIG_DBLST_END, }, /* FIXME: TBC */
.attenuator = { 3, 6, 9, 12, 15, 18, 21, RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(9999),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = IC7800_VFO_OPS,
.scan_ops = IC7800_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM },
{ 100, 101, RIG_MTYPE_EDGE }, /* two by two */
RIG_CHAN_END,
},
.rx_range_list1 = { {kHz(30),MHz(60),IC7800_ALL_RX_MODES,-1,-1,IC7800_VFOS,IC7800_ANTS},
RIG_FRNG_END, },
.tx_range_list1 = {
FRQ_RNG_HF(1,IC7800_OTHER_TX_MODES, W(5),W(200),IC7800_VFOS,IC7800_ANTS),
FRQ_RNG_6m(1,IC7800_OTHER_TX_MODES, W(5),W(200),IC7800_VFOS,IC7800_ANTS),
FRQ_RNG_HF(1,IC7800_AM_TX_MODES, W(5),W(50),IC7800_VFOS,IC7800_ANTS), /* AM class */
FRQ_RNG_6m(1,IC7800_AM_TX_MODES, W(5),W(50),IC7800_VFOS,IC7800_ANTS), /* AM class */
RIG_FRNG_END, },
.rx_range_list2 = { {kHz(30),MHz(60),IC7800_ALL_RX_MODES,-1,-1,IC7800_VFOS,IC7800_ANTS},
RIG_FRNG_END, },
.tx_range_list2 = {
FRQ_RNG_HF(2,IC7800_OTHER_TX_MODES, W(5),W(200),IC7800_VFOS,IC7800_ANTS),
FRQ_RNG_6m(2,IC7800_OTHER_TX_MODES, W(5),W(200),IC7800_VFOS,IC7800_ANTS),
FRQ_RNG_HF(2,IC7800_AM_TX_MODES, W(5),W(50),IC7800_VFOS,IC7800_ANTS), /* AM class */
FRQ_RNG_6m(2,IC7800_AM_TX_MODES, W(5),W(50),IC7800_VFOS,IC7800_ANTS), /* AM class */
/* USA only, TBC: end of range and modes */
{MHz(5.33050),MHz(5.33350),IC7800_OTHER_TX_MODES,W(2),W(100),IC7800_VFOS,IC7800_ANTS}, /* USA only */
{MHz(5.34650),MHz(5.34950),IC7800_OTHER_TX_MODES,W(2),W(100),IC7800_VFOS,IC7800_ANTS}, /* USA only */
{MHz(5.36650),MHz(5.36950),IC7800_OTHER_TX_MODES,W(2),W(100),IC7800_VFOS,IC7800_ANTS}, /* USA only */
{MHz(5.37150),MHz(5.37450),IC7800_OTHER_TX_MODES,W(2),W(100),IC7800_VFOS,IC7800_ANTS}, /* USA only */
{MHz(5.40350),MHz(5.40650),IC7800_OTHER_TX_MODES,W(2),W(100),IC7800_VFOS,IC7800_ANTS}, /* USA only */
RIG_FRNG_END, },
.tuning_steps = {
{IC7800_1HZ_TS_MODES,1},
{IC7800_ALL_RX_MODES,Hz(100)},
{IC7800_ALL_RX_MODES,kHz(1)},
{IC7800_ALL_RX_MODES,kHz(5)},
{IC7800_ALL_RX_MODES,kHz(9)},
{IC7800_ALL_RX_MODES,kHz(10)},
{IC7800_ALL_RX_MODES,kHz(12.5)},
{IC7800_ALL_RX_MODES,kHz(20)},
{IC7800_ALL_RX_MODES,kHz(25)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR, kHz(2.4)},
{RIG_MODE_CW|RIG_MODE_CWR, Hz(500)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_AM, kHz(2.4)},
{RIG_MODE_FM, kHz(15)},
{RIG_MODE_FM, kHz(8)},
RIG_FLT_END,
},
.str_cal = IC7800_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&ic7800_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.set_ant = icom_set_ant,
.get_ant = icom_get_ant,
.set_rit = icom_set_rit,
.decode_event = icom_decode_event,
.set_level = ic7800_set_level,
.get_level = ic7800_get_level,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_parm = icom_set_parm,
.get_parm = icom_get_parm,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ptt = icom_set_ptt,
.get_ptt = icom_get_ptt,
.get_dcd = icom_get_dcd,
.set_ts = icom_set_ts,
.get_ts = icom_get_ts,
.set_rptr_shift = icom_set_rptr_shift,
.get_rptr_shift = icom_get_rptr_shift,
.set_rptr_offs = icom_set_rptr_offs,
.get_rptr_offs = icom_get_rptr_offs,
.set_ctcss_tone = icom_set_ctcss_tone,
.get_ctcss_tone = icom_get_ctcss_tone,
.set_ctcss_sql = icom_set_ctcss_sql,
.get_ctcss_sql = icom_get_ctcss_sql,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_vfo = icom_set_split_vfo,
.get_split_vfo = icom_mem_get_split_vfo,
};
/*
* IC-7800 has 0x11 command using index instead of backend's real dB value
*
* c.f. http://www.plicht.de/ekki/civ/civ-p42.html
*/
int ic7800_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val)
{
int i;
if (level == RIG_LEVEL_ATT && val.i != 0) {
/* Convert dB to index */
for (i=0; i < 7; i++) {
if (val.i == rig->state.attenuator[i]) {
val.i = i+1;
break;
}
}
/* TODO: Should fail when not found? */
}
return icom_set_level(rig, vfo, level, val);
}
/*
* IC-7800 has 0x11 command using index instead of backend's real dB value
*/
int ic7800_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val)
{
int ret;
ret = icom_get_level(rig, vfo, level, val);
if (ret != RIG_OK)
return ret;
/* Convert index to dB
* Rem: ATT index 0 means attenuator Off
*/
if (level == RIG_LEVEL_ATT && val->i > 0 && val->i <= 7)
val->i = rig->state.attenuator[val->i - 1];
return RIG_OK;
}
Reference in New Issue View Git Blame Copy Permalink