mirror of
https://github.com/Hamlib/Hamlib.git
synced 2024-09-21 18:37:18 +00:00
463bc7ae3b
Icom users, who use the K9JM CI-V router to protect their PW-1 amplifiers from damage due to Icom's broken CI-V protocol handling, require a 1s delay after opening the serial port. This is due to the router using an Arduino & Arduino USB adapter that employs a bootloader which holds the RS-232 interface for 1s after reset (DTR releases reset). Hamlib already has a retry and timeout mechanism which was set to 3 and 200ms respectively for most Icom rigs. This change increses that timeout to 1s. The increaased timeout will have little or no impact on clients as it only comes into play if there is a problem.
312 lines
7.7 KiB
C
312 lines
7.7 KiB
C
/*
|
|
* Hamlib CI-V backend - IC-R7000 and IC-R7100 descriptions
|
|
* Copyright (c) 2000-2004 by Stephane Fillod
|
|
*
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include "config.h"
|
|
#endif
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <hamlib/rig.h>
|
|
#include "serial.h"
|
|
#include "misc.h"
|
|
#include "idx_builtin.h"
|
|
|
|
#include "icom.h"
|
|
#include "icom_defs.h"
|
|
#include "frame.h"
|
|
|
|
|
|
#define ICR7000_MODES (RIG_MODE_AM|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_WFM)
|
|
|
|
#define ICR7000_OPS (RIG_OP_FROM_VFO|RIG_OP_MCL)
|
|
|
|
static int r7000_set_freq(RIG *rig, vfo_t vfo, freq_t freq);
|
|
|
|
#define ICR7100_FUNCS (RIG_FUNC_VSC)
|
|
#define ICR7100_LEVELS (RIG_LEVEL_ATT|RIG_LEVEL_AF|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR)
|
|
#define ICR7100_PARMS (RIG_PARM_ANN)
|
|
#define ICR7100_SCAN_OPS (RIG_SCAN_MEM) /* TBC */
|
|
|
|
/* FIXME: S-Meter measurements */
|
|
#define ICR7100_STR_CAL UNKNOWN_IC_STR_CAL
|
|
|
|
static const struct icom_priv_caps icr7000_priv_caps = {
|
|
0x08, /* default address */
|
|
0, /* 731 mode */
|
|
0, /* no XCHG */
|
|
r7100_ts_sc_list
|
|
};
|
|
/*
|
|
* ICR7000 rigs capabilities.
|
|
*/
|
|
const struct rig_caps icr7000_caps = {
|
|
.rig_model = RIG_MODEL_ICR7000,
|
|
.model_name = "IC-R7000",
|
|
.mfg_name = "Icom",
|
|
.version = BACKEND_VER ".0",
|
|
.copyright = "LGPL",
|
|
.status = RIG_STATUS_ALPHA,
|
|
.rig_type = RIG_TYPE_RECEIVER,
|
|
.ptt_type = RIG_PTT_NONE,
|
|
.dcd_type = RIG_DCD_NONE,
|
|
.port_type = RIG_PORT_SERIAL,
|
|
.serial_rate_min = 300,
|
|
.serial_rate_max = 1200,
|
|
.serial_data_bits = 8,
|
|
.serial_stop_bits = 1,
|
|
.serial_parity = RIG_PARITY_NONE,
|
|
.serial_handshake = RIG_HANDSHAKE_NONE,
|
|
.write_delay = 0,
|
|
.post_write_delay = 0,
|
|
.timeout = 1000,
|
|
.retry = 3,
|
|
|
|
.has_get_func = RIG_FUNC_NONE,
|
|
.has_set_func = RIG_FUNC_NONE,
|
|
.has_get_level = RIG_LEVEL_NONE,
|
|
.has_set_level = RIG_LEVEL_NONE,
|
|
.has_get_parm = RIG_PARM_NONE,
|
|
.has_set_parm = RIG_PARM_NONE,
|
|
.level_gran = {},
|
|
.parm_gran = {},
|
|
.ctcss_list = NULL,
|
|
.dcs_list = NULL,
|
|
.preamp = { RIG_DBLST_END, },
|
|
.attenuator = { RIG_DBLST_END, },
|
|
.max_rit = Hz(0),
|
|
.max_xit = Hz(0),
|
|
.max_ifshift = Hz(0),
|
|
.targetable_vfo = 0,
|
|
.vfo_ops = ICR7000_OPS,
|
|
.transceive = RIG_TRN_RIG,
|
|
.bank_qty = 0,
|
|
.chan_desc_sz = 0,
|
|
|
|
.chan_list = {
|
|
{ 1, 99, RIG_MTYPE_MEM },
|
|
RIG_CHAN_END, },
|
|
|
|
.rx_range_list1 = {
|
|
{MHz(25),MHz(1000),ICR7000_MODES,-1,-1, RIG_VFO_A},
|
|
{MHz(1025),MHz(2000),ICR7000_MODES,-1,-1, RIG_VFO_A},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list1 = { RIG_FRNG_END, },
|
|
|
|
.rx_range_list2 = {
|
|
{MHz(25),MHz(1000),ICR7000_MODES,-1,-1, RIG_VFO_A},
|
|
{MHz(1025),MHz(2000),ICR7000_MODES,-1,-1, RIG_VFO_A},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list2 = { RIG_FRNG_END, }, /* no TX ranges, this is a receiver */
|
|
|
|
.tuning_steps = {
|
|
{ICR7000_MODES,100}, /* resolution */
|
|
#if 0
|
|
{ICR7000_MODES,kHz(1)},
|
|
{ICR7000_MODES,kHz(5)},
|
|
{ICR7000_MODES,kHz(10)},
|
|
{ICR7000_MODES,12500},
|
|
{ICR7000_MODES,kHz(25)},
|
|
#endif
|
|
RIG_TS_END,
|
|
},
|
|
/* mode/filter list, remember: order matters! */
|
|
.filters = {
|
|
{RIG_MODE_SSB, kHz(2.8)},
|
|
{RIG_MODE_FM|RIG_MODE_AM, kHz(15)},
|
|
{RIG_MODE_FM|RIG_MODE_AM, kHz(6)}, /* narrow */
|
|
{RIG_MODE_WFM, kHz(150)},
|
|
RIG_FLT_END,
|
|
},
|
|
|
|
.cfgparams = icom_cfg_params,
|
|
.set_conf = icom_set_conf,
|
|
.get_conf = icom_get_conf,
|
|
|
|
.priv = (void*)&icr7000_priv_caps,
|
|
.rig_init = icom_init,
|
|
.rig_cleanup = icom_cleanup,
|
|
.rig_open = NULL,
|
|
.rig_close = NULL,
|
|
|
|
.set_freq = r7000_set_freq,
|
|
.get_freq = icom_get_freq,
|
|
.set_mode = icom_set_mode,
|
|
.get_mode = icom_get_mode,
|
|
.set_vfo = icom_set_vfo,
|
|
|
|
.decode_event = icom_decode_event,
|
|
.set_mem = icom_set_mem,
|
|
.vfo_op = icom_vfo_op,
|
|
};
|
|
|
|
|
|
static const struct icom_priv_caps icr7100_priv_caps = {
|
|
0x34, /* default address */
|
|
0, /* 731 mode */
|
|
0, /* no XCHG */
|
|
r7100_ts_sc_list
|
|
};
|
|
/*
|
|
* ICR7100A rig capabilities.
|
|
*/
|
|
const struct rig_caps icr7100_caps = {
|
|
.rig_model = RIG_MODEL_ICR7100,
|
|
.model_name = "IC-R7100",
|
|
.mfg_name = "Icom",
|
|
.version = BACKEND_VER ".0",
|
|
.copyright = "LGPL",
|
|
.status = RIG_STATUS_UNTESTED,
|
|
.rig_type = RIG_TYPE_RECEIVER,
|
|
.ptt_type = RIG_PTT_NONE,
|
|
.dcd_type = RIG_DCD_RIG,
|
|
.port_type = RIG_PORT_SERIAL,
|
|
.serial_rate_min = 300,
|
|
.serial_rate_max = 1200,
|
|
.serial_data_bits = 8,
|
|
.serial_stop_bits = 1,
|
|
.serial_parity = RIG_PARITY_NONE,
|
|
.serial_handshake = RIG_HANDSHAKE_NONE,
|
|
.write_delay = 0,
|
|
.post_write_delay = 0,
|
|
.timeout = 1000,
|
|
.retry = 3,
|
|
|
|
.has_get_func = ICR7100_FUNCS,
|
|
.has_set_func = ICR7100_FUNCS,
|
|
.has_get_level = ICR7100_LEVELS,
|
|
.has_set_level = RIG_LEVEL_SET(ICR7100_LEVELS),
|
|
.has_get_parm = ICR7100_PARMS,
|
|
.has_set_parm = RIG_PARM_SET(ICR7100_PARMS),
|
|
.level_gran = {
|
|
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
|
|
},
|
|
.parm_gran = {},
|
|
.ctcss_list = NULL,
|
|
.dcs_list = NULL,
|
|
.preamp = { RIG_DBLST_END },
|
|
.attenuator = { 20, RIG_DBLST_END },
|
|
.max_rit = Hz(0),
|
|
.max_xit = Hz(0),
|
|
.max_ifshift = Hz(0),
|
|
.targetable_vfo = 0,
|
|
.vfo_ops = ICR7000_OPS,
|
|
.scan_ops = ICR7100_SCAN_OPS,
|
|
.transceive = RIG_TRN_RIG,
|
|
.bank_qty = 0,
|
|
.chan_desc_sz = 0,
|
|
|
|
.chan_list = {
|
|
{ 1, 99, RIG_MTYPE_MEM }, /* TBC */
|
|
{ 0x0900, 0x0909, RIG_MTYPE_EDGE }, /* 2 by 2 */
|
|
{ 0x0910, 0x0919, RIG_MTYPE_EDGE }, /* 2 by 2 */
|
|
RIG_CHAN_END, },
|
|
|
|
.rx_range_list1 = {
|
|
{MHz(25),MHz(1999.9999),ICR7000_MODES,-1,-1, RIG_VFO_A},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list1 = { RIG_FRNG_END, },
|
|
|
|
.rx_range_list2 = {
|
|
{MHz(25),MHz(1999.9999),ICR7000_MODES,-1,-1, RIG_VFO_A},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list2 = { RIG_FRNG_END, }, /* no TX ranges, this is a receiver */
|
|
|
|
.tuning_steps = {
|
|
{ICR7000_MODES,100}, /* resolution */
|
|
{ICR7000_MODES,kHz(1)},
|
|
{ICR7000_MODES,kHz(5)},
|
|
{ICR7000_MODES,kHz(10)},
|
|
{ICR7000_MODES,12500},
|
|
{ICR7000_MODES,kHz(20)},
|
|
{ICR7000_MODES,kHz(25)},
|
|
{ICR7000_MODES,kHz(100)},
|
|
RIG_TS_END,
|
|
},
|
|
/* mode/filter list, remember: order matters! */
|
|
.filters = {
|
|
{RIG_MODE_SSB, kHz(2.4)},
|
|
{RIG_MODE_FM|RIG_MODE_AM, kHz(15)},
|
|
{RIG_MODE_FM|RIG_MODE_AM, kHz(6)}, /* narrow */
|
|
{RIG_MODE_WFM, kHz(150)},
|
|
RIG_FLT_END,
|
|
},
|
|
.str_cal = ICR7100_STR_CAL,
|
|
|
|
.cfgparams = icom_cfg_params,
|
|
.set_conf = icom_set_conf,
|
|
.get_conf = icom_get_conf,
|
|
|
|
.priv = (void*)&icr7100_priv_caps,
|
|
.rig_init = icom_init,
|
|
.rig_cleanup = icom_cleanup,
|
|
.rig_open = NULL,
|
|
.rig_close = NULL,
|
|
|
|
.set_freq = r7000_set_freq, /* TBC for R7100 */
|
|
.get_freq = icom_get_freq,
|
|
.set_mode = icom_set_mode,
|
|
.get_mode = icom_get_mode,
|
|
.set_vfo = icom_set_vfo,
|
|
|
|
.set_ts = icom_set_ts,
|
|
.get_ts = icom_get_ts,
|
|
.set_func = icom_set_func,
|
|
.get_func = icom_get_func,
|
|
.set_level = icom_set_level,
|
|
.get_level = icom_get_level,
|
|
#if 0
|
|
.set_parm = icom_set_parm,
|
|
.get_parm = icom_get_parm,
|
|
#endif
|
|
|
|
.decode_event = icom_decode_event,
|
|
.set_mem = icom_set_mem,
|
|
.vfo_op = icom_vfo_op,
|
|
.scan = icom_scan,
|
|
.get_dcd = icom_get_dcd,
|
|
};
|
|
|
|
|
|
/*
|
|
* Function definitions below
|
|
*/
|
|
|
|
|
|
/*
|
|
* r7000_set_freq
|
|
*/
|
|
static int r7000_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
|
|
{
|
|
long long f = (long long)freq;
|
|
|
|
/*
|
|
* The R7000 cannot set freqencies higher than 1GHz,
|
|
* this is done by flipping a switch on the front panel and
|
|
* stripping the most significant digit.
|
|
* This is the only change with the common icom_set_freq
|
|
*/
|
|
f %= (long long)GHz(1);
|
|
|
|
return icom_set_freq(rig, vfo, (freq_t)f);
|
|
}
|
|
|