hamradio/Hamlib
1
0
Fork 0
mirror of https://github.com/Hamlib/Hamlib.git synced 2024-09-21 18:37:18 +00:00
Code Issues Packages Projects Releases Wiki Activity
61d3ef7f66
Hamlib/yaesu/ft9000.c
Nate Bargmann, N0NB 61d3ef7f66 Correct long standing bugs where hardware handshake was not the default 
for the latest Yaesu backends (ft9000 and later that use "New CAT" 
commands) and set the default "write_delay" parameter to '0' as these
radios deault to assuming a command has been received after 10 mSec of
no data on the wire.  The default write_delay had been 50 mSec (for no 
good reason except I copied and pasted from older backends) which was
too long as these models implement a CAT TOT (Time Out Timer) of 10 mSec.



git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3012 7ae35d74-ebe9-4afe-98af-79ac388436b8
2010-12-05 23:46:03 +00:00

212 lines
8.0 KiB
C
Raw Blame History

/*
* hamlib - (C) Frank Singleton 9000 (javabear at users.sourceforge.net)
*
* ft9000.c - (C) Nate Bargmann 2007 (n0nb at arrl.net)
* (C) Stephane Fillod 2008
* (C) Terry Embry 2008-2009
*
* This shared library provides an API for communicating
* via serial interface to an FT-9000 using the "CAT" interface
*
*
* $Id: ft9000.c,v 1.6 2009-01-11 17:39:26 mrtembry Exp $
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "hamlib/rig.h"
#include "bandplan.h"
#include "serial.h"
#include "misc.h"
#include "yaesu.h"
#include "newcat.h"
#include "ft9000.h"
#include "idx_builtin.h"
#include "tones.h"
/*
* ft9000 rigs capabilities.
* Also this struct is READONLY!
*
*/
const struct rig_caps ft9000_caps = {
.rig_model = RIG_MODEL_FT9000,
.model_name = "FTDX-9000",
.mfg_name = "Yaesu",
.version = NEWCAT_VER,
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800, /* Default rate per manual */
.serial_rate_max = 38400,
.serial_data_bits = 8,
.serial_stop_bits = 1, /* Assumed since manual makes no mention */
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = FT9000_WRITE_DELAY,
.post_write_delay = FT9000_POST_WRITE_DELAY,
.timeout = 2000,
.retry = 0,
.has_get_func = FT9000_FUNCS,
.has_set_func = FT9000_FUNCS,
.has_get_level = FT9000_LEVELS,
.has_set_level = RIG_LEVEL_SET(FT9000_LEVELS),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
[LVL_CWPITCH] = { .min = { .i = 300 }, .max = { .i = 1050 }, .step = { .i = 50 } },
},
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, 20, RIG_DBLST_END, }, /* TBC */
.attenuator = { 6, 12, 18, RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(9999),
.max_ifshift = Hz(1000),
.vfo_ops = FT9000_VFO_OPS,
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_OFF, /* May enable later as the 9000 has an Auto Info command */
.bank_qty = 0,
.chan_desc_sz = 0,
.str_cal = FT9000_STR_CAL,
.chan_list = {
/* TBC */
{ 1, 99, RIG_MTYPE_MEM, NEWCAT_MEM_CAP },
{ 100, 117, RIG_MTYPE_EDGE, NEWCAT_MEM_CAP }, /* two by two */
RIG_CHAN_END,
},
.rx_range_list1 = {
/* General coverage + ham */
{kHz(30), MHz(60), FT9000_ALL_RX_MODES, -1, -1, FT9000_VFO_ALL, FT9000_TX_ANTS|RIG_ANT_5},
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1, FT9000_OTHER_TX_MODES, W(5), W(400), FT9000_VFO_ALL, FT9000_TX_ANTS),
FRQ_RNG_HF(1, FT9000_AM_TX_MODES, W(2), W(100), FT9000_VFO_ALL, FT9000_TX_ANTS), /* AM class */
FRQ_RNG_6m(1, FT9000_OTHER_TX_MODES, W(5), W(400), FT9000_VFO_ALL, FT9000_TX_ANTS),
FRQ_RNG_6m(1, FT9000_AM_TX_MODES, W(2), W(100), FT9000_VFO_ALL, FT9000_TX_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(30), MHz(56), FT9000_ALL_RX_MODES, -1, -1, FT9000_VFO_ALL, FT9000_TX_ANTS|RIG_ANT_5},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, FT9000_OTHER_TX_MODES, W(5), W(400), FT9000_VFO_ALL, FT9000_TX_ANTS),
FRQ_RNG_HF(2, FT9000_AM_TX_MODES, W(2), W(100), FT9000_VFO_ALL, FT9000_TX_ANTS), /* AM class */
FRQ_RNG_6m(2, FT9000_OTHER_TX_MODES, W(5), W(400), FT9000_VFO_ALL, FT9000_TX_ANTS),
FRQ_RNG_6m(2, FT9000_AM_TX_MODES, W(2), W(100), FT9000_VFO_ALL, FT9000_TX_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{FT9000_SSB_CW_RX_MODES, Hz(10)}, /* Normal */
{FT9000_SSB_CW_RX_MODES, Hz(100)}, /* Fast */
{FT9000_AM_RX_MODES, Hz(100)}, /* Normal */
{FT9000_AM_RX_MODES, kHz(1)}, /* Fast */
{FT9000_FM_RX_MODES, Hz(100)}, /* Normal */
{FT9000_FM_RX_MODES, kHz(1)}, /* Fast */
RIG_TS_END,
},
/* mode/filter list, .remember = order matters! */
.filters = {
{FT9000_CW_RTTY_PKT_RX_MODES, Hz(1800)}, /* Normal CW, RTTY, PKT/USER */
{FT9000_CW_RTTY_PKT_RX_MODES, Hz(500)}, /* Narrow CW, RTTY, PKT/USER */
{FT9000_CW_RTTY_PKT_RX_MODES, Hz(2400)}, /* Wide CW, RTTY, PKT/USER */
{RIG_MODE_SSB, Hz(2400)}, /* Normal SSB */
{RIG_MODE_SSB, Hz(1800)}, /* Narrow SSB */
{RIG_MODE_SSB, Hz(3000)}, /* Wide SSB */
{RIG_MODE_AM, Hz(6000)}, /* Normal AM */
{RIG_MODE_AM, Hz(3000)}, /* Narrow AM */
{FT9000_FM_RX_MODES, Hz(12000)}, /* Normal FM */
{FT9000_FM_RX_MODES, Hz(8000)}, /* Narrow FM */
RIG_FLT_END,
},
.priv = NULL,
.rig_init = newcat_init,
.rig_cleanup = newcat_cleanup,
.rig_open = newcat_open, /* port opened */
.rig_close = newcat_close, /* port closed */
.set_freq = newcat_set_freq,
.get_freq = newcat_get_freq,
.set_mode = newcat_set_mode,
.get_mode = newcat_get_mode,
.set_vfo = newcat_set_vfo,
.get_vfo = newcat_get_vfo,
.set_ptt = newcat_set_ptt,
.get_ptt = newcat_get_ptt,
.set_split_vfo = newcat_set_split_vfo,
.get_split_vfo = newcat_get_split_vfo,
.set_rit = newcat_set_rit,
.get_rit = newcat_get_rit,
.set_xit = newcat_set_xit,
.get_xit = newcat_get_xit,
.set_ant = newcat_set_ant,
.get_ant = newcat_get_ant,
.get_func = newcat_get_func,
.set_func = newcat_set_func,
.get_level = newcat_get_level,
.set_level = newcat_set_level,
.get_mem = newcat_get_mem,
.set_mem = newcat_set_mem,
.vfo_op = newcat_vfo_op,
.get_info = newcat_get_info,
.power2mW = newcat_power2mW,
.mW2power = newcat_mW2power,
.set_rptr_shift = newcat_set_rptr_shift,
.get_rptr_shift = newcat_get_rptr_shift,
.set_ctcss_tone = newcat_set_ctcss_tone,
.get_ctcss_tone = newcat_get_ctcss_tone,
.set_ctcss_sql = newcat_set_ctcss_sql,
.get_ctcss_sql = newcat_get_ctcss_sql,
.set_powerstat = newcat_set_powerstat,
.get_powerstat = newcat_get_powerstat,
.get_ts = newcat_get_ts,
.set_ts = newcat_set_ts,
.set_trn = newcat_set_trn,
.get_trn = newcat_get_trn,
.set_channel = newcat_set_channel,
.get_channel = newcat_get_channel,
};
Reference in New Issue View Git Blame Copy Permalink