clones/librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-09-21 18:38:25 +00:00
Code Issues Packages Projects Releases Wiki Activity
fd93d7ef7f
librenms/mibs/IRM3-MIB
Adam Amstrong 02b3530f38 move more mibs to root mibdir and rename 
git-svn-id: http://www.observium.org/svn/observer/trunk@1575 61d68cd4-352d-0410-923a-c4978735b2b8
2010-07-31 15:59:17 +00:00

3332 lines
93 KiB
Plaintext
Raw Blame History

IRM3-MIB DEFINITIONS ::= BEGIN
-- irm3-mib.txt
-- Revision: 1.04.01
-- Part Number: 2170568-01
-- Date: June 20, 1996
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
-- This module provides authoritative definitions for Cabletron's
-- repeater MIB for the IRM3.
--
-- This module will be extended, as required.
--
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright August 94 Cabletron Systems
IMPORTS
NetworkAddress, Counter
FROM RFC1155-SMI
repeaterRev1, repeaterRev2, subSysMMAC
FROM IRM-OIDS
DisplayString
FROM RFC1213-MIB
OBJECT-TYPE FROM RFC-1212;
-- This MIB module uses the extended OBJECT-TYPE macro as defined in RFC 1212
-- Textual convention
-- DisplayString ::= OCTET STRING
-- This data type is used to model textual information taken from the NVT
-- ASCII character set. By convention, objects with this syntax, unless
-- explicitly stated, are declared as having:
--
-- SIZE (0..255)
-- MAC addresses will be represented in a canonical form.
-- Formal definitions for RepeaterRev1
device OBJECT IDENTIFIER ::= { repeaterRev1 1 }
board OBJECT IDENTIFIER ::= { repeaterRev1 2 }
port OBJECT IDENTIFIER ::= { repeaterRev1 3 }
sourceAddr OBJECT IDENTIFIER ::= { repeaterRev1 7 }
redundancy OBJECT IDENTIFIER ::= { repeaterRev1 8 }
alarm OBJECT IDENTIFIER ::= { repeaterRev1 9 }
-- Device Object Definitions
-- This section defines the objects under the Device node.
-- Again, there is only one instance of a Device object in any device.
deviceMMACType OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1), -- none of the following
mMAC8(2),
mMAC5(3),
mMAC3(4),
mINIMMAC(5),
mRXI(6),
m3Shunt(7),
m5Shunt(8),
m8FNB(9),
nonFNB(10),
mMAC3Shunting(11),
mMAC5Shunting(12),
mMAC8Shunting(13),
m8Shunting(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the type of MMAC."
::= { device 2 }
deviceSlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of available device slots in this device, including the
IRM slot."
::= { device 3 }
deviceOccupiedSlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slots that contain MIM boards. This field is bit encoded (eg.
if a bit is set then that board is present). For example, a value
of 3 indicates that there are boards in the IRM slot and the first
MIM slot."
::= { device 4 }
devicePortsOn OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of operating ports on the device."
::= { device 5 }
deviceTotalPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of repeater ports on the MMAC."
::= { device 6 }
deviceTotalPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets detected on all ports of this device."
::= { device 7}
deviceTotalErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sum of all of the errors listed including alignment, CRC, runts,
giants, and out of window collisions."
::= { device 8 }
deviceTransmitColls OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of transmit collisions detected by this MMAC."
::= { device 9 }
deviceRecColls OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of receive collisions detected by this MMAC."
::= { device 10 }
deviceAlignErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets with alignment errors detected."
::= { device 11 }
deviceCRCErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets with bad CRC detected."
::= { device 12 }
deviceRunts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of runt frames detected by this device."
::= { device 13 }
deviceOOWColls OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of out-of-window collisions detected by this device."
::= { device 14 }
deviceNoResources OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of No resource condtions detected by this device."
::= { device 15 }
deviceRecBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bytes detected on the network."
::= { device 16 }
deviceGiantFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets longer than 1518 bytes."
::= { device 17 }
deviceRestart OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If this object is set to 1 the device is restarted."
::= { device 18 }
deviceResetCounters OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If this object is set to 1, all of the devices counters are reset
to 0."
::= { device 19 }
deviceRedundantCts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of redundant circuits available for use."
::= { device 20 }
deviceDiscover OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS deprecated
DESCRIPTION
"When this variable is set to 1 The following events occur:
(1) The device sends a LINK-UP trap
(2) The device sends a proprietary packet that will
cause all other Cabeltron devices on that local
network to send a LINK-UP trap."
::= { device 21 }
deviceTimeBase OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of seconds used as the interval for performing all of
the rate alarm checks. The minimum is 10 secs."
::= { device 24 }
deviceResetRedundancy OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this object to a 1 will reset redundancy for the entire box."
::= { device 25 }
deviceSrcAddrAgingTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of minutes that a source address is not detected before it
is removed from the source address table."
::= { device 26 }
deviceSrcAddrTraps OBJECT-TYPE
SYNTAX INTEGER
{
trapsOff(1),
trapsOn(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls sending of source address related traps."
::= { device 27 }
deviceSrcAddrLocked OBJECT-TYPE
SYNTAX INTEGER
{
lockOff(1),
lockOn(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If this is set to 2, any source addresses that are detected on
station ports that are not in the table will cause the port to
be turned off."
::= { device 28 }
deviceEtherOccupiedSlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slots that contain Ethernet MIM boards. This field
is bit encoded (eg. if a bit is set then that board is present).
For example, a value of 2 indicates that there is an Ethernet board
in the first MIM slot."
::= { device 29 }
deviceTROccupiedSlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slots that contain managable Token Ring MIM boards. This
field is bit encoded (eg. if a bit is set then that board is
present). For example, a value of 2 indicates that there is a
managable Token Ring board in the first MIM slot."
::= { device 30 }
deviceFDDIOccupiedSlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slots that contain FDDI MIM boards. This field is bit encoded
(eg. if a bit is set then that board is present). For example, a
value of 2 indicates that there is an FDDI board in the first MIM
slot."
::= { device 31 }
deviceRestoreDefaults OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If this object is set to 1 the factory defaults are restored. This,
however, does not affect the device's IP address."
::= { device 32 }
deviceActiveUsers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of active users seen by this device."
::= { device 33 }
deviceOSIFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with OSI protocol seen by this device."
::= { device 34 }
deviceNovellFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with NOVELL protocol seen by this device."
::= { device 35 }
deviceBanyanFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with BANYAN protocol seen by this device."
::= { device 36 }
deviceDECNetFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with DECNET protocol seen by this device."
::= { device 37 }
deviceXNSFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with XNS protocol seen by this device."
::= { device 38 }
deviceIPFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with TCPIP protocol seen by this device."
::= { device 39 }
deviceCtronFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with Cabletron protocol seen by this device."
::= { device 40 }
deviceAppletalkFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with Appletalk protocol seen by this device."
::= { device 41 }
deviceOtherFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this device, that do not fall into
any of the previously listed protocol catagories."
::= { device 42 }
device64To127Frames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this device, with frame sizes between
64 and 127 bytes."
::= { device 43 }
device128To255Frames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this device, with frame sizes between
128 and 255 bytes."
::= { device 44 }
device256To511Frames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this device, with frame sizes between
256 and 511 bytes."
::= { device 45 }
device512To1023Frames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this device, with frame sizes between
512 and 1023 bytes."
::= { device 46 }
device1024To1518Frames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this device, with frame sizes between
1024 and 1518 bytes."
::= { device 47 }
deviceBroadPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sum of broadcast packets detected on all ports of this device."
::= { device 48}
deviceMultPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sum of multicast packets detected on all ports of this device."
::= { device 49}
deviceThdPartyOccupiedSlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slots that contain Third Party MIM boards. This field
is bit encoded (eg. if a bit is set then that board is present).
For example, a value of 2 indicates that there is a Third Party
board in the first MIM slot."
::= { device 51 }
deviceImimOccupiedSlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slots that contain Cabletron Intelligent MIM boards. This field
is bit encoded (eg. if a bit is set then that board is present).
For example, a value of 2 indicates that there is an Intelligent board
in the first MIM slot."
::= { device 52 }
deviceLinkTraps OBJECT-TYPE
SYNTAX INTEGER
{
trapsOff(1),
trapsOn(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls sending of link related traps."
::= { device 54 }
ctIPDefaultFrameType OBJECT-TYPE
SYNTAX INTEGER {
ethernet(1),
snap8022(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Defines the default frame type that will be used by the
device. A device will understand both frame types and will
respond based upon the framing type that is learned for
the given address. This object defines the type of framing
that will be used if no framing is known, for example ARP
requests.
Setting a value of 8022snap(2) will result in framing
802.3 - 802.2 - IP packets being generated by default.
Setting a value of ethernet(1) will result in framing
ethernet IP packets by default."
DEFVAL { ethernet }
::= { device 56 }
deviceSrcAddrType OBJECT-TYPE
SYNTAX INTEGER {
ipHash(1),
decHash(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Selects the hashing algorithm of source addresses, DEC or IP"
DEFVAL{ ipHash }
::= { device 57 }
-- 1.3.6.1.4.1.52.1.2.1.1.57
-- Start of Virtual Table
-- SourceAddr object definitions
-- The SourceAddr object section contains objects that can be accessed by
-- source address. The table index for these objects is the
-- source address of interest. Each octet within the source address forms
-- a separate sub-identifier.
sourceAddrBoard OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The board number of the port that the supplied source address has
been found on."
::= { sourceAddr 1 }
sourceAddrPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port number of the port that the supplied source address has
been found on."
::= { sourceAddr 2 }
-- End of Virtual Table
-- Redundancy Object Definitions
-- This section defines the objects that are associated with cable level
-- redundancy. The concepts for this are described in other documentation.
-- There are two types of instance identifiers for redundancy objects.
redundancyPollInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of seconds between polls for redundancy."
::= { redundancy 1 }
redundancyTestTod OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time of day at which the redundant circuits should be tested."
::= { redundancy 2 }
redundancyPerformTest OBJECT-TYPE
SYNTAX INTEGER
{
performTest(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Test the redundant circuit."
::= { redundancy 3 }
-- Start of Virtual Table
-- The index for this table is circuitNum, which is of type INTEGER.
redundancyCircuitName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the indicated circuit."
::= { redundancy 4 }
redundancyRetryCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of unanswered polls allowed for the indicated circuit
before the current connection is declared bad."
::= { redundancy 5 }
redundancyNumBPs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of board/port combinations associated with the indicated
circuit."
::= { redundancy 6 }
-- End of Virtual Table
-- Start of Virtual Table
-- This table is indexed by circuitNum and circuitBPIndex
redundancyCircuitBoard OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The boards associated with the indicated circuit."
::= { redundancy 7 }
redundancyCircuitPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ports associated with the indicated circuit."
::= { redundancy 8 }
redundancyCircuitTypes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of each port associated with the indicated circuit."
::= { redundancy 9 }
-- End of Virtual Table
-- Start of Virtual Table
-- This table is indexed by circuitNum
redundancyCircuitNumAddr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of addresses associated with the indicated circuit."
::= { redundancy 10 }
redundancyCircuitMACAddrAdd OBJECT-TYPE
SYNTAX NetworkAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Adds this ethernet address to the polling list for the indicated
circuit."
::= { redundancy 11 }
redundancyCircuitMACAddrDel OBJECT-TYPE
SYNTAX NetworkAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Removes this ethernet address from the polling list for the
indicated circuit."
::= { redundancy 12 }
-- End of Virtual Table
-- Start of Virtual Table
-- This table is indexed by circuitNum and circuitBPIndex
redundancyCircuitMACAddrDisp OBJECT-TYPE
SYNTAX NetworkAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ethernet addresses associated with the indicated circuit,
accessed by index."
::= { redundancy 13 }
-- End of Virtual Table
-- Start of Virtual Table
-- This table is indexed by circuitNum
redundancyCircuitEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables and disables the indicated circuit."
::= { redundancy 14 }
redundancyCircuitReset OBJECT-TYPE
SYNTAX INTEGER
{
reset(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the indicated circuit. Return all of the associated board
and ports to NOT-USED, remove associated addresses from the polling
list, reset the circuit name and retry count to default values."
::= { redundancy 15 }
-- ALARM Object definitions
-- This section defines the objects that can cause alarms to be generated.
-- For each section there are 3 sources of alarms:
-- Traffic levels,
-- collision rates (as they relate to traffic), and
-- error rates (also related to traffic).
-- All alarms are qualified by the Devicetimebase (ie. the rates are measured
-- for a particular length of time).
-- Formal definitions for the structure below ALARM are:
devAlrm OBJECT IDENTIFIER ::= { alarm 1 }
bdAlrm OBJECT IDENTIFIER ::= { alarm 2 }
portAlrm OBJECT IDENTIFIER ::= { alarm 3 }
-- DevAlrm object defintions
-- This section defines the objects that will control alarms associated with
-- the device.
-- Formal definitions below DevAlrm
devTraffic OBJECT IDENTIFIER ::= { devAlrm 1 }
devColls OBJECT IDENTIFIER ::= { devAlrm 2 }
devError OBJECT IDENTIFIER ::= { devAlrm 3 }
devBroad OBJECT IDENTIFIER ::= { devAlrm 4 }
-- DevTraffic Object Definitions
-- This section defines the DevTraffic objects. These objects control the
-- device level traffic alarm generation.
devTrafficEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable the sending of device level traffic traps."
::= { devTraffic 1 }
devTrafficThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The threshold of packets within the Devicetimebase that will cause
a traffic alarm."
::= { devTraffic 2 }
-- DevColls Object Defintions
-- This section defines the objects that control the device level collision
-- alarm.
devCollsEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable the sending of device level collision alarms."
::= { devColls 1 }
devCollsThreshold OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object represents the number of collisions per good packet
measured by the device that will generate an alarm."
::= { devColls 2 }
-- DevErrorS Object Defintions
-- This section defines the objects that control the device level error alarm.
devErrorEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable the sending of device level error alarms."
::= { devError 1 }
devErrorThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object represents the percentage of errors per good packet that
will generate an alarm."
::= { devError 2 }
devErrorSource OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of error used for the error alarm.
The integer is a bit encoded version of which errors to include
in the error sum. The bits are encoded as follows:
CRCErrors - Bit 0 - Least Significant Bit
runts - Bit 1
OOWColls - Bit 2
alignErrs - Bit 3
NoResource - Bit 4
Giants - Bit 5
"
::= { devError 3 }
-- DevBroad Object Defintions
-- This section defines the objects that control the device level broadcast
-- alarm.
devBroadEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable the sending of device level broadcast traps."
::= { devBroad 1 }
devBroadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The threshold of broadcast packets within the Devicetimebase
that will cause a broadcast alarm."
::= { devBroad 2 }
-- BdAlrm object definitions
-- This section defines the objects that will control alarms associated with
-- the board.
-- Formal definitions below BdAlrm
bdTraffic OBJECT IDENTIFIER ::= { bdAlrm 1 }
bdColls OBJECT IDENTIFIER ::= { bdAlrm 2 }
bdError OBJECT IDENTIFIER ::= { bdAlrm 3 }
bdBroad OBJECT IDENTIFIER ::= { bdAlrm 4 }
-- BdTraffic Object Definitions
-- This section defines the BdTraffic objects.
-- These objects control the board level traffic alarm generation.
-- Start of Virtual Table
-- This table is indexed by boardNum, which is an INTEGER
bdTrafficEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable the sending of board level traffic traps for this board."
::= { bdTraffic 1 }
bdTrafficThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The threshold of packets within the Devicetimebase that will cause
a traffic alarm."
::= { bdTraffic 2 }
bdTrafficBdDisable OBJECT-TYPE
SYNTAX INTEGER {
disable(1), -- Do NOT disable board
enable (2) -- Allow for disabling of board
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Permit a board to be disabled on a traffic threshold alarm."
::= { bdTraffic 3 }
-- End of Virtual Table
-- BdColls Object Defintions
-- This section defines the objects that control the board level collision
-- alarm.
-- Start of Virtual Table
-- This table is indexed by boardNum, which is an INTEGER
bdCollsEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable the sending of board level collision alarms."
::= { bdColls 1 }
bdCollsThreshold OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object represents the number of collisions per good packet
measured by the board that will generate an alarm."
::= { bdColls 2 }
bdCollsBdDisable OBJECT-TYPE
SYNTAX INTEGER {
disable(1), -- Do NOT disable board
enable (2) -- Allow for disabling of board
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Permit a board to be disabled on a collision threshold alarm."
::= { bdColls 3 }
-- End of Virtual Table
-- BdErrors Object Defintions
-- This section defines the objects that control the board level error alarm.
-- Start of Virtual Table
-- This table is indexed by boardNum, which is an INTEGER
bdErrorEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable the sending of board level error alarms."
::= { bdError 1 }
bdErrorThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object represents the percentage of errors per good packet
that will generate an alarm."
::= { bdError 2 }
bdErrorSource OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of error used for the error alarm.
The integer is a bit encoded version of which errors to include
in the error sum. The bits are encoded as follows:
CRCErrors - Bit 0 Least Significant Bit
runts - Bit 1
OOWColls - Bit 2
alignErrs - Bit 3
NoResource - Bit 4
Giants - Bit 5
"
::= { bdError 3 }
bdErrorBdDisable OBJECT-TYPE
SYNTAX INTEGER {
disable(1), -- Do NOT disable board
enable (2) -- Allow for disabling of board
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Permit a board to be disabled on an error threshold alarm."
::= { bdError 4 }
-- End of Virtual Table
-- BdBroad Object Definitions
-- This section defines the BdBroadcast objects.
-- These objects control the board level broadcast alarm generation.
-- Start of Virtual Table
-- This table is indexed by boardNum, which is an INTEGER
bdBroadEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable the sending of board level broadcast traps for this board."
::= { bdBroad 1 }
bdBroadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The threshold of broadcast packets within the Devicetimebase
that will cause a broadcast alarm."
::= { bdBroad 2 }
bdBroadDisable OBJECT-TYPE
SYNTAX INTEGER {
disable(1), -- Do NOT disable board
enable (2) -- Allow for disabling of board
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Permit a board to be disabled on a broadcast threshold alarm."
::= { bdBroad 3 }
-- PortAlrm object definitions
-- This section defines the objects that will control alarms associated with
-- the port.
-- PortAlrm Instance Identifiers
-- There is set of port level alarms per board thus the instance identifiers
-- for PortAlrm objects is the board number.
-- Formal defintions below PortAlrm
portTraffic OBJECT IDENTIFIER ::= { portAlrm 1 }
portColls OBJECT IDENTIFIER ::= { portAlrm 2 }
portError OBJECT IDENTIFIER ::= { portAlrm 3 }
portBroad OBJECT IDENTIFIER ::= { portAlrm 4 }
-- PortTraffic Object Definitions
-- This section defines the PortTraffic objects.
-- These objects control the port level traffic alarm generation.
-- Start of Virtual Table
-- This table is indexed by boardNum, which is an INTEGER
portTrafficEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable the sending of port level traffic traps for this port."
::= { portTraffic 1 }
portTrafficThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The threshold of packets within the Devicetimebase that will cause
a traffic alarm."
::= { portTraffic 2 }
-- End of Virtual Table
-- Start of Virtual Table
-- This table is indexed by boardNum and portNum, both of which are INTEGERs
portTrafficPortDisable OBJECT-TYPE
SYNTAX INTEGER {
disable(1), -- Do NOT disable port
enable (2) -- Allow for disabling of port
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Permit a port to be disabled on a traffic threshold alarm."
::= { portTraffic 3 }
-- End of Virtual Table
-- PortColls Object Definitions
-- This section defines the objects that control the port level collision
-- alarm.
-- Start of Virtual Table
-- This table is indexed by boardNum, which is an INTEGER
portCollsEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable the sending of port level collsion alarms."
::= { portColls 1 }
portCollsThreshold OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object represents the number of collisions per good packet
measured by the port that will generate an alarm."
::= { portColls 2 }
-- End of Virtual Table
-- Start of Virtual Table
-- This table is indexed by boardNum and portNum, both INTEGERs
portCollsPortDisable OBJECT-TYPE
SYNTAX INTEGER {
disable(1), -- Do NOT disable port
enable (2) -- Allow for disabling of port
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Permit a port to be disabled on a collision threshold alarm."
::= { portColls 3 }
-- End of Virtual Table
-- PortErrors Object Defintions
-- This section defines the objects that control the port level error alarm.
-- Start of Virtual Table
-- This table is indexed by boardNum, an INTEGER
portErrorEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable the sending of port level error alarms."
::= { portError 1 }
portErrorThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object represents the percentage of errors per good packet
that will generate an alarm."
::= { portError 2 }
portErrorSource OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of error used for the error alarm.
The integer is a bit encoded version of which errors to include
in the error sum. The bits are encoded as follows:
CRCErrors - Bit 0 - Least Significant Bit
runts - Bit 1
OOWColls - Bit 2
alignErrs - Bit 3
NoResource - Bit 4
Giants - Bit 5
"
::= { portError 3 }
-- End of Virtual Table
-- Start of Virtual Table
-- This table is indexed by boardNum and portNum, both INTEGERs
portErrorPortDisable OBJECT-TYPE
SYNTAX INTEGER {
disable(1), -- Do NOT disable port
enable (2) -- Allow for disabling of port
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Permit a port to be disabled on an error threshold alarm."
::= { portError 4 }
-- End of Virtual Table
-- PortBroad Object Definitions
-- This section defines the PortBroadcast objects.
-- These objects control the port level broadcast alarm generation.
-- Start of Virtual Table
-- This table is indexed by boardNum, an INTEGER
portBroadEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable the sending of port level broadcast alarms."
::= { portBroad 1 }
portBroadThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The threshold of broadcast packets within the Devicetimebase that
will cause a broadcast alarm."
::= { portBroad 2 }
-- End of Virtual Table
-- Start of Virtual Table
-- This table is indexed by boardNum and portNum, both INTEGERs
portBroadDisable OBJECT-TYPE
SYNTAX INTEGER {
disable(1), -- Do NOT disable port
enable (2) -- Allow for disabling of port
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Permit a port to be disabled on a broadcast threshold alarm."
::= { portBroad 3 }
-- End of Virtual Table
-- RepeaterRev2 Formal declarations
deviceR2 OBJECT IDENTIFIER ::= { repeaterRev2 1}
networkR2 OBJECT IDENTIFIER ::= { repeaterRev2 2}
boardR2 OBJECT IDENTIFIER ::= { repeaterRev2 3}
portR2 OBJECT IDENTIFIER ::= { repeaterRev2 4}
-- Token Ring Device object definitions
-- This sections defines the objects associated with Token Ring on the
-- device.
-- The instance ID for these objects are all zero.
tokenRingD OBJECT IDENTIFIER ::= { deviceR2 3 }
deviceTRPortsOn OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This gives the number of Token Ring ports enabled on this device."
::= { tokenRingD 1 }
deviceTRPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This gives the total number of Token Ring ports on this device."
::= { tokenRingD 2 }
deviceTRRingPortsOn OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This gives the number of Token Ring ring ports that are enabled."
::= { tokenRingD 3 }
deviceTRRingPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This gives the total number of Token Ring ring ports on this device."
::= { tokenRingD 4 }
deviceTRLans OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This gives the number of Token Rings formed on this device."
::= { tokenRingD 5 }
deviceTRBoards OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This returns the number of Token Ring boards on the device."
::= { tokenRingD 6 }
deviceTRBoardMap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slots that contain Token Ring MIM boards. This field is bit
encoded (eg. if a bit is set then that board is present). For
example, a value of 2 indicates that there is a Token Ring board
in the first MIM slot."
::= { tokenRingD 7 }
-- Board Object Definitions
-- This section will describe the management objects associated with a board.
-- Formal Definitions within Board
commonB OBJECT IDENTIFIER ::= { boardR2 1}
ethernetB OBJECT IDENTIFIER ::= { boardR2 2}
tokenRingB OBJECT IDENTIFIER ::= { boardR2 3}
fDDIB OBJECT IDENTIFIER ::= { boardR2 4}
-- Instance Identifiers for Board Objects
-- The Instance Identifiers for board objects is the number of the slot in
-- the MMAC cage.
-- Common Board Objects
-- Start of Virtual Table
-- This table is indexed by boardIndex
boardIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slot number of this board."
::= { commonB 1 }
boardName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the board. This field will only contain printable ASCII
characters."
::= { commonB 2 }
boardType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the MIM. (eg. FOT, TPT, etc). See appendix A for
encoding."
::= { commonB 3 }
boardTotalPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of ports supported on this board."
::= { commonB 4 }
boardStatus OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The administrative status of this MIM."
::= { commonB 5 }
boardPortsOn OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of operating ports on the board."
::= { commonB 6 }
boardOper OBJECT-TYPE
SYNTAX INTEGER {
operational(1),
notOperational(2)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Returns a value indicating whether any of the enabled ports on the
board are not operational, thereby placing the board in a
non-operational state."
::= { commonB 7 }
boardActiveUsers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of active users seen on this board."
::= { commonB 8 }
-- End of Virtual Table
-- Ethernet Board Objects
-- Start of Virtual Table
-- This table is indexed by boardIndex, an INTEGER
boardTotalPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets this board has seen since the last
reset."
::= { ethernetB 1 }
boardErrorPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets that have experienced an error."
::= { ethernetB 2 }
boardTransColls OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of transmit collisions this board has detected."
::= { ethernetB 3 }
boardRecColls OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Receive mode collisions this board has detected."
::= { ethernetB 4 }
boardAlignErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of misaligned frames this board has detected."
::= { ethernetB 5 }
boardCRCErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets with bad CRC detected."
::= { ethernetB 6 }
boardRunts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of runt frames detected by this board."
::= { ethernetB 7 }
boardOOWColls OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of out-of-window collisions detected by this board."
::= { ethernetB 8 }
boardNoResources OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times the no resources condition was detected for
this board."
::= { ethernetB 9 }
boardRecBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bytes detected on this board."
::= { ethernetB 10 }
boardGiants OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets longer than 1518 bytes detected on this board."
::= { ethernetB 11 }
boardOSIFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with OSI protocol seen by this board."
::= { ethernetB 12 }
boardNovellFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with NOVELL protocol seen by this board."
::= { ethernetB 13 }
boardBanyanFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with BANYAN protocol seen by this board."
::= { ethernetB 14 }
boardDECNetFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with DECNET protocol seen by this board."
::= { ethernetB 15 }
boardXNSFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with XNS protocol seen by this board."
::= { ethernetB 16 }
boardIPFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with TCPIP protocol seen by this board."
::= { ethernetB 17 }
boardCtronFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with Cabletron protocol seen by this board."
::= { ethernetB 18 }
boardAppletalkFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with Appletalk protocol seen by this board."
::= { ethernetB 19 }
boardOtherFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this board, that do not fall into
any of the previously listed protocol catagories."
::= { ethernetB 20 }
board64To127Frames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this board, with frame sizes between
64 and 127 bytes."
::= { ethernetB 21 }
board128To255Frames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this board, with frame sizes between
128 and 255 bytes."
::= { ethernetB 22 }
board256To511Frames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this board, with frame sizes between
256 and 511 bytes."
::= { ethernetB 23 }
board512To1023Frames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this board, with frame sizes between
512 and 1023 bytes."
::= { ethernetB 24 }
board1024To1518Frames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this board, with frame sizes between
1024 and 1518 bytes."
::= { ethernetB 25 }
boardBroadPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sum of broadcast packets detected on all ports of this board."
::= { ethernetB 26 }
boardMultPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sum of multicast packets detected on all ports of this board."
::= { ethernetB 27 }
boardSrcAddrLocked OBJECT-TYPE
SYNTAX INTEGER
{
lockOff(1),
lockOn(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If this is set to 2, any source addresses that are detected on
station port that are not in the table will cause the port to
be turned off."
::= { ethernetB 31 }
-- End of Virtual Table
-- Token Ring Board Objects
-- Start of Virtual Table
-- This table is indexed by boardIndex, an INTEGER
boardTotalRingPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ring ports on this board."
::= { tokenRingB 1 }
boardTotalStationPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of station ports on this board."
::= { tokenRingB 2 }
boardModeStatus OBJECT-TYPE
SYNTAX INTEGER {
mgmtMode(1),
autoMOde(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This describes the mode of this board. autoMode
means the board is using the hardware defaults. mgmtMode
means the board is using setting by the user."
::= { tokenRingB 3 }
boardTotalRingPortsOn OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of enabled ring ports on this board."
::= { tokenRingB 4 }
boardTotalStationPortsOn OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of enabled station ports on this board."
::= { tokenRingB 5 }
boardSpeed OBJECT-TYPE
SYNTAX INTEGER {
fourMHz(4),
sixteenMhz(16)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The speed of the board. The board will expect to receive
data at this speed."
::= { tokenRingB 6 }
ringSpeedFault OBJECT-TYPE
SYNTAX INTEGER
{
noFaultDetected(1),
faultDetected(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Data speed of station mismatches configuration speed of board. Board
is automatically bypassed."
::= { tokenRingB 7 }
boardSpeedFaultPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object indicates which ring speed detect circuit(s) caused the
fault, if there was one. The return code indicates the location on
the board feeding the speed detect circuit(s). Ring in means the
circuit on the back-up path between the ring out port and the ring
in port. FNB means the circuit between the ring in port and the FNB.
NotApplicable means that a ring Speed Fault has not occurred.
Since more than one circuit can cause the fault, the return code is
the sum of the following values:
1 - FNB
2 - RingIn
4 - RingOut
8 - NotApplicable
"
::= { tokenRingB 8 }
boardFirstRingPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object defines which port on the board is the first ring port.
All ring port numbers will be consecutive. Using this in conjunction
with BoardRingPorts, all ring port numbers can be determined."
::= { tokenRingB 9 }
boardBypassRingPortState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2),
illegal(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets and reports the state of the ring bypass relay on
boards which contain a ring bypass relay. The ring bypass relay will
separate only the ring ports from the FNB. The FNB only bypasses the
station ports on these boards. The illegal value (3) will return an
error status if set."
::= { tokenRingB 10 }
-- End of Virtual Table
-- Port Object Definitions
-- This section will define the objects associated with ports.
-- Formal Definitions within Port
commonP OBJECT IDENTIFIER ::= { portR2 1}
ethernetP OBJECT IDENTIFIER ::= { portR2 2}
tokenRingP OBJECT IDENTIFIER ::= { portR2 3}
fDDIP OBJECT IDENTIFIER ::= { portR2 4}
-- Instance Identifiers for Port Objects
-- The instance identifiers for port objects are board# and port#.
-- The format of the port identifier is Board_num.Port_num or B.P.
-- Start of Virtual Table
-- This table is indexed by boardIndex and portIndex, both INTEGERs
portIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slot number of this port."
::= { commonP 1 }
portMediaType OBJECT-TYPE
SYNTAX INTEGER
{
bnc(1), -- Ethernet coaxial connector
aui(2), -- Ethernet AUI connector
tp(3), -- Ethernet Twisted Pair connector
tenbt(4), -- Ethernet 10Base-T Twisted Pair connector
fot(5), -- Ethernet Fiber Optic connector
laser(6), -- Ethernet Laser Fiber Optic connector
stp(7), -- Token Ring Shielded Twisted Pair connector
utp(8), -- Token Ring Unshielded Twisted Pair connector
fo(9), -- Token Ring Fiber Optic connector
otherMedia(10) -- Media type not listed above
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the port. (eg. FOT, TPT, etc)."
::= { commonP 2 }
portAdminState OBJECT-TYPE
SYNTAX INTEGER
{
off(1),
on( 2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The administrative status of this port."
::= { commonP 3 }
portSourceAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A source address that has been seen on this port."
::= { commonP 4 }
portOper OBJECT-TYPE
SYNTAX INTEGER {
notOperational(1),
operational(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Returns a value indicating whether this port is in an operational
state."
::= { commonP 5 }
portActiveUsers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of active users seen on this port."
::= { commonP 6 }
portName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the port. this field will only contain printable ASCII
characters."
::= { commonP 7 }
-- End of Virtual Table
-- Ethernet Port Objects
-- Start of Virtual Table
-- This table is indexed by boardIndex and portIndex, both INTEGERs
portTopologyType OBJECT-TYPE
SYNTAX INTEGER {
stations(1),
trunk(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The topological type of the port."
::= { ethernetP 1 }
portLinkStatus OBJECT-TYPE
SYNTAX INTEGER
{
linkSignalInactive(1),
linkSignalActive(2),
linkSignalNotSupported(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the link signal for this port."
::= { ethernetP 2 }
portStatus OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
segmented(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network state of this port."
::= { ethernetP 3 }
portTotalPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets this port has seen since the last reset."
::= { ethernetP 4 }
portErrorPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets that have experienced an error."
::= { ethernetP 5 }
portXmitColls OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Transmit mode collisions this port has detected."
::= { ethernetP 6 }
portRecColls OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Receive mode collisions this port has detected."
::= { ethernetP 7 }
portAlignErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of misaligned frames this port has detected."
::= { ethernetP 8 }
portCRCErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets with bad CRC detected."
::= { ethernetP 9 }
portRunts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of runt frames detected by this port."
::= { ethernetP 10 }
portOOWColls OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of out-of-window collisions detected by this port."
::= { ethernetP 11 }
portNoResorces OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times the no resource condition is detected on this
port."
::= { ethernetP 12 }
portRecBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bytes detected on the network."
::= { ethernetP 13 }
portGiants OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames longer than 1518 bytes detected on this port."
::= { ethernetP 14 }
portRedundCrt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The redundant circuit with which this port is associated."
::= { ethernetP 15 }
portRedundType OBJECT-TYPE
SYNTAX INTEGER
{
notUsed(1), -- indicates that the port is not used
-- in circuit
primary(2),
backup(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of port this port is in the redundant circuit. The port
must be associated with a redundant circuit first, using the object
portRedundCrt."
::= { ethernetP 16 }
portRedundStatus OBJECT-TYPE
SYNTAX INTEGER
{
notUsed(1), -- indicates that the port is not used
-- in circuit
active(2),
inactive(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The current state of this port is in the redundant circuit. The port
must be associated with a redundant circuit first, using the object
portRedundCrt."
::= { ethernetP 17 }
portForceTrunkType OBJECT-TYPE
SYNTAX INTEGER
{
notForced(1),
forced(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable forces a port to be a trunk port."
::= { ethernetP 18 }
portOSIFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with OSI protocol seen by this port."
::= { ethernetP 19 }
portNovellFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with NOVELL protocol seen by this port."
::= { ethernetP 20 }
portBanyanFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with BANYAN protocol seen by this port."
::= { ethernetP 21 }
portDECNetFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with DECNET protocol seen by this port."
::= { ethernetP 22 }
portXNSFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with XNS protocol seen by this port."
::= { ethernetP 23 }
portIPFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with TCPIP protocol seen by this port."
::= { ethernetP 24 }
portCtronFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with Cabletron protocol seen by this port."
::= { ethernetP 25 }
portAppletalkFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames with Appletalk protocol seen by this port."
::= { ethernetP 26 }
portOtherFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this port, that do not fall into
any of the previously listed protocol catagories."
::= { ethernetP 27 }
port64To127Frames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this port, with frame sizes between
64 and 127 bytes."
::= { ethernetP 28 }
port128To255Frames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this port, with frame sizes between
128 and 255 bytes."
::= { ethernetP 29 }
port256To511Frames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this port, with frame sizes between
256 and 511 bytes."
::= { ethernetP 30 }
port512To1023Frames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this port, with frame sizes between
512 and 1023 bytes."
::= { ethernetP 31 }
port1024To1518Frames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames seen by this port, with frame sizes between
1024 and 1518 bytes."
::= { ethernetP 32 }
portBroadPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sum of broadcast packets detected on this port."
::= { ethernetP 33 }
portMultPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sum of multicast packets detected on this port."
::= { ethernetP 34 }
portSrcAddrLocked OBJECT-TYPE
SYNTAX INTEGER
{
lockOff(1),
lockOn(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If this is set to 2, any source addresses that are detected on
station ports that are not in the table will cause the port to
be turned off."
::= { ethernetP 38 }
-- End of Virtual Table
-- Token Ring Port Objects
-- Token Ring Port Objects are further broken down into station objects and
-- Ring-In/Ring-Out objects. The formal definitions are:
stationP OBJECT IDENTIFIER ::= { tokenRingP 1 }
ringP OBJECT IDENTIFIER ::= { tokenRingP 2 }
ringPort2 OBJECT IDENTIFIER ::= { tokenRingP 3 }
commonRP OBJECT IDENTIFIER ::= { ringPort2 1 }
autowrapRP OBJECT IDENTIFIER ::= { ringPort2 2 }
-- Start of Virtual Table
-- This table is indexed by boardIndex and portIndex, both INTEGERs
stationPortLinkStatus OBJECT-TYPE
SYNTAX INTEGER
{
linkSignalInactive(1),
linkSignalActive(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When station is supplying phantom current the Link Signal is active.
When there is no phantom current the Link Signal is inactive."
::= { stationP 1 }
stationPortLinkStateTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of in seconds which have elapsed since the station port
last changed state. Note: setting this to zero will clear the time."
::= { stationP 2 }
-- End of Virtual Table
-- This section will define the objects associated with Ring In and Ring
-- Out ports, e.g. trmim10R.
-- Start of Virtual Table
-- This table is indexed by boardIndex and portIndex, both INTEGERs
ringPortLinkStatus OBJECT-TYPE
SYNTAX INTEGER
{
off(1), -- wrapped
on(2) -- active
}
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Reports the link state of a ring port."
::= { ringP 1 }
ringPortLinkStateTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS obsolete
DESCRIPTION
"Reports the time (in seconds) since the ring port's link
state changed."
::= { ringP 2 }
-- End of Virtual Table
-- Start of Virtual Table
-- This table is indexed by boardIndex and portIndex, both INTEGERs
commonRPcapabilities OBJECT-TYPE
SYNTAX INTEGER
{
nonAutowrap(1),
autowrap(2),
selectable(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object returns a code indicating that the queried ring port
is nonautowrap, autowrap or selectable."
::= { commonRP 1 }
-- End of Virtual Table
-- Start of Virtual Table
-- This table is indexed by boardIndex and portIndex, both INTEGERs
autowrapRPFaultStatus OBJECT-TYPE
SYNTAX INTEGER
{
faultUndetectable(1),
noFaultDetected(2),
faultDetected(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object reports the wire fault of an autowrappable ring port."
::= { autowrapRP 1 }
autowrapRPFaultStateTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object reports the amount of time in time ticks since the ring
port fault state last changed. Writing zero to this object resets
the time. If a zero is read, it means either zero time ticks have
passed or the ring port is nonautowrap."
::= { autowrapRP 2 }
autowrapRPSelectedType OBJECT-TYPE
SYNTAX INTEGER
{
unselectable(1),
stp(2), -- sheilded twisted pair
fo(3) -- Fiber Optic
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates the media type of the indicated ring port on
some boards. Some boards provide both STP and fiber optic ring ports.
The unselectable value will return an error if set. A set of STP or FO
for a non-selectable ring port will not do anything, i.e. the status
of normal is returned."
::= { autowrapRP 3 }
autowrapRPPhantomCurrent OBJECT-TYPE
SYNTAX INTEGER
{
noPhantomAvailable(1),
activatePhantom(2),
deactivatePhantom(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object tells the board to turn on phantom current for the ring
port and look for wire faults. NoPhantomAvailable will return an
error if set. A set of activatePhantom or deactivatePhantom for a
non-autowrap ring port will not do anything, i.e. the status of
normal is returned."
::= { autowrapRP 4 }
-- End of Virtual Table
-- Product specific Objects
-- For each of the individual repeaters/bridges there are several objects
-- that particular to that product.
fNB OBJECT IDENTIFIER ::= { subSysMMAC 1 }
-- FNB Objects:
-- Start of Virtual Table
-- This table is indexed by boardIndex, an INTEGER
connectedLeft OBJECT-TYPE
SYNTAX INTEGER {
detached(1),
attached(2),
faulted(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Connected Left board (board n + 1) has the following states:
Detached == 1 (Management (only management) detached,
read/write).
Attached == 2 (Management/AutoMode attached, read/write).
Faulted == 3 (Management/AutoMode tried to attach but
failed READ ONLY).
"
::= { fNB 1 }
connectedRight OBJECT-TYPE
SYNTAX INTEGER {
detached(1),
attached(2),
faulted(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Connected Right board (board n - 1) has the following states:
Detached == 1 (Management (only management) detached,
read/write).
Attached == 2 (Management/AutoMode attached, read/write ).
Faulted == 3 (Management/AutoMode tried to attach but
failed READ ONLY).
"
::= { fNB 2 }
boardBypassState OBJECT-TYPE
SYNTAX INTEGER {
off(1), -- not bypassed
on(2) -- bypassed
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates that the board is in the bypassed state
when it is ON. Bypassed means the board is NOT attached to the
FNB."
::= { fNB 3 }
-- TrapTypes
--
-- This section will describe the trap types that the
-- repeater section of the IRM3 can generate. These are not
-- objects, but Object identifers used to indicate the specfic
-- trap. They are taken from the object space and are thus
-- documented here.
--
-- The SNMP protocol provides a mechanism for
-- asynchronusly notifying management stations of significant
-- changes in the network. This mechanism is the SNMP trap
-- message. This document will describe the general format for
-- all trap messages that Cabletron products will generate as
-- well as the specific traps that the will be generated by the
-- IRM3.
--
-- Trap Formats
--
-- The SNMP trap messages are composed of two user
-- definable areas: the specific trap type and the VarBindings
-- (eg. the interesting information). The specific trap type is
-- an INTEGER that is used to determine the specific trap that
-- has occurred. The "interesting information" contains a group
-- of objects identifiers (OID) and their values that provide
-- information about the trap.
--
--
-- Trap Description
--
-- PortSegmenting
--
-- Specfic Trap Type Code - 0x101
--
-- When a port goes from operational to segmented, a trap
-- will be generated. For these purposes, the port state will
-- be sampled every XXX seconds, thus it will be statistically
-- possible to miss oscillating circuits.
--
-- The interesting information will include:
-- - Board number
-- - Port number
--
-- Trap Description
--
-- PortUnsegementing
-- Specfic Trap Type Code - 0x102
--
-- When it is detected that a previously segmented port
-- has gone operational, a trap will be generated. This is
-- also sampled, thus a trap may not be generated for each
-- transition.
--
-- The interesting information will include:
-- - Board number
-- - Port number
--
--
--
-- Trap Description
--
-- PortLinkUp
--
-- Specfic Trap Type Code - 0x103
--
-- This trap will be generated when it is determined that
-- MAU has been attached to the MMAC. This is only appropriate
-- for MIMs that support the concept of a link state.
--
-- The interesting information will include:
-- - Board number
-- - Port number
--
-- Trap Description
--
-- PortLinkDown
--
-- Specfic Trap Type Code - 0x104
--
-- This trap will be generated when a previously attached
-- MAU is removed or powered down. Again, this is only
-- appropriate for MIM's that support link state.
--
-- The interesting information will include:
-- - Board number
-- - Port number
--
-- Trap Description
-- NewSourceAddress
-- Specfic Trap Type Code - 0x105
--
-- This trap will be generated when the MMAC detects the
-- existence of a new source address on one of it's ports.
--
-- The interesting information will include:
--
-- - Board number
-- - Port number
-- - The new source address
--
-- Trap Description
-- SourceAddressTimeout
--
-- Specfic Trap Type Code - 0x106
--
-- This trap will indicate that the MMAC has not detected
-- a packet generated by this source address within a certain
-- timeout.
--
--
--
-- The interesting information will include:
--
-- - Board number
-- - Port number
-- - Source address that timed out.
--
-- Trap Description
--
-- BoardRemoval
--
-- Specfic Trap Type Code - 0x107
--
-- This trap will be generated when the MMAC detects that
-- MIM has been removed.
--
-- The interesting information will include:
--
-- - Board number
--
-- Trap Description
-- BoardInsertion
--
-- Specfic Trap Type Code - 0x108
--
--
-- This trap will be generated when the MMAC determines
-- that a new board has been inserted.
--
-- The interesting information will include:
--
-- - Board number
-- - Board type
--
-- Trap Description
-- ActivePortInRedundantCircuitFailed
--
-- Specfic Trap Type Code - 0x109
--
-- This trap will be generated when the active port in a
-- redundant circuit has failed polling. This will indicate the
-- activation of redundancy.
--
-- The interesting information will include:
--
-- - Board number
-- - Port number
-- - Circuit number
--
-- Trap Description
-- RedundantPortActivated
--
-- Specfic Trap Type Code - 0x10a
--
--
--
-- This trap indicates that a new port has been activated
-- in a redundant circuit. This does NOT indicate that this
-- port is usable, but is being tested. If the port fails the
-- above (3.9) trap will be generated.
--
-- The interesting information will include:
--
-- - Board number
-- - Port number
-- - Circuit number
--
-- Trap Description
-- RedundantPortTestFailed
--
-- Specfic Trap Type Code - 0x10b
--
--
--
-- This trap will be generated when the MMAC executes it's
-- periodic redundancy diagnostics and finds on of the ports in
-- a redundant circuit has failed. This message will not
-- indicate that redundancy has been activated, just that the
-- port has failed and should be fixed before it is needed.
--
-- The interesting information will include:
--
-- - Board number
-- - Port number
-- - Circuit number
--
-- Trap Description
-- deviceTrafficThresholdExceeded
--
-- Specfic Trap Type Code - 0x10c
--
-- This trap will be generated when the traffic (good
-- packets per time interval) has been exceed for the entire
-- MMAC.
--
-- The interesting information will include:
--
-- - threshold value
-- - timebase value
--
-- Trap Description
-- deviceErrorThresholdExceeded
--
-- Specfic Trap Type Code - 0x10d
--
-- This trap will be generated when packets of the
-- selected error type exceeds a threshold percentage of the
-- good packets for a particular interval for the entire MMAC.
--
-- The interesting information will include:
--
-- - threshold value
-- - selected error type
-- - timebase
--
-- Trap Description
-- deviceCollsionThresholdExceeded
--
-- Specfic Trap Type Code - 0x10e
--
-- This trap will be generated when collsions exceed a
-- threshold percentage of the good packets for a particular
-- interval for the entire MMAC.
--
-- The interesting information will include:
--
-- - threshold value
-- - timebase
--
-- Trap Description
-- BoardTrafficThresholdExceeded
--
-- Specfic Trap Type Code - 0x10f
--
-- This trap will be generated when the traffic (good
-- packets per time interval) has been exceed for a particular
-- MIM.
--
-- The interesting information will include:
--
-- - threshold value
-- - timebase value
-- - board number
--
-- Trap Description
-- BoardErrorThresholdExceeded
--
-- Specfic Trap Type Code - 0x110
--
-- This trap will be generated when packets of the
-- selected error type exceeds a threshold percentage of the
-- good packets for a particular interval for a particular MIM.
-- This will most likely indicate a bad MIM.
--
-- The interesting information will include:
-- - threshold value
-- - selected error type
-- - timebase
-- - Board number
--
-- Trap Description
-- BoardCollisionThresholdExceeded
--
--
--
-- Specfic Trap Type Code - 0x111
--
--
-- This trap will be generated when collisions exceed a
-- threshold percentage of the good packets for a particular
-- interval for a particular MIM.
--
-- The interesting information will include:
--
-- - threshold value
-- - timebase
-- - Board number
--
-- Trap Description
-- PortTrafficThresholdExceeded
--
-- Specfic Trap Type Code - 0x112
--
--
-- This trap will be generated when the traffic (good
-- packets per time interval) has been exceed for a particular
-- port.
--
-- The interesting information will include:
--
-- - threshold value
-- - timebase value
-- - board number
-- - port number
--
-- Trap Description
-- PortErrorThresholdExceeded
--
-- Specfic Trap Type Code - 0x113
--
--
--
-- This trap will be generated when packets of the
-- selected error type exceeds a threshold percentage of the
-- good packets for a particular interval for a particular
-- port.
--
-- The interesting information will include:
--
-- - threshold value
-- - selected error type
-- - timebase
-- - board number
-- - port number
--
--
-- Trap Description
-- PortCollisionThresholdExceeded
--
-- Specfic Trap Type Code - 0x114
--
-- This trap will be generated when collisions exceed a
-- threshold percentage of the good packets for a particular
-- interval for a particular port.
--
-- The interesting information will include:
--
-- - threshold value
-- - timebase
-- - board number
-- - port number
--
-- Trap Description
-- PortTypeChanged
--
-- Specfic Trap Type Code - 0x115
--
-- This trap indicates that a port has changed from a
-- station port to a link port or vice versa.
--
-- The interesting information is:
--
-- - Board number
-- - Port Number
-- - New type value
--
-- Trap Description
-- LockSTATUSChanged
--
-- Specfic Trap Type Code - 0x116
--
-- This trap is generated when the status of the address lock
-- changes.
--
-- The interesting information is:
--
-- - New lock status
--
--
-- Trap Description
-- PortSecurityViolation
--
-- Specfic Trap Type Code - 0x117
--
-- This trap is generated when a source address other than those
-- locked to a port is seen.
--
-- The interesting information is:
--
-- - Board number
-- - Port Number
-- - Violating Address
--
--
-- Trap Description
-- PortViolationReset
--
-- Specfic Trap Type Code - 0x118
--
-- This trap is generated when management intervention has
-- reset a port after a violation has occured.
--
-- The interesting information is:
--
-- - Board Number
-- - Port Number
--
-- Trap Description
-- EnvTempWarm
--
-- Specfic Trap Type Code - 0x119
--
-- This trap is generated when the device detects that the temperature
-- within the device has reached a WARM condition.
--
--
-- The interesting information is:
--
-- - Board Number
--
--
-- Trap Description
-- EnvTempHot
--
-- Specfic Trap Type Code - 0x11A
--
-- This trap is generated when the device detects that the temperature
-- within the device has reached a HOT condition.
-- The interesting information is:
--
-- - Board Number
--
--
-- Trap Description
-- EnvTempNormal
--
-- Specfic Trap Type Code - 0x11C
--
-- This trap is generated when the device detects that the temperature
-- within the device has returned to a NORMAL state.
--
-- The interesting information is:
--
-- - Board Number
--
--
-- Trap Description
-- EnvVoltageLow
--
-- Specfic Trap Type Code - 0x11B
--
-- This trap is generated when a board detects that it's power supply
-- voltage is LOW.
--
--
-- The interesting information is:
--
-- - Power Supply Number
--
-- Trap Description
-- EnvVoltageNormal
--
-- Specfic Trap Type Code - 0x11D
--
-- This trap is generated when the device detects that the system voltage
-- has returned to a NORMAL state.
--
--
-- The interesting information is:
--
-- - None
--
-- Trap Description
-- EnvFanFailure
--
-- Specific Trap Type Code - 0x11E
--
-- This trap is generated when the device detects that one or more fans in
-- the chassis have failed.
--
--
-- The interesting information is:
--
-- - None
--
-- Trap Description
-- EnvFanNormal
--
-- Specific Trap Type Code - 0x11F
--
-- This trap is generated when the device detects that all fans in the chassis
-- are functional.
--
--
-- The interesting information is:
--
-- - None
--
-- Trap Description
-- DeviceBroadcastThresholdExceeded
--
-- Specific Trap Type Code - 0x120
--
-- This trap is generated when the broadcast packets (per time
-- interval) have exceeded the threshold for the entire MMAC.
--
-- The Interesting Information is:
-- devBroadThreshold { devBroad 2 }
-- devTimeBase { device 24 }
-- Trap Description
-- BoardBroadcastThresholdExceeded
--
-- Specific Trap Type Code - 0x121
--
-- This trap is generated when the broadcast packets (per time
-- interval) have exceeded the threshold for the given board.
--
-- The Interesting Information is:
-- bdBroadThreshold { bdBroad 2 }
-- devTimeBase { device 24 }
-- boardIndex { commonB 1 }
--
-- Trap Description
-- PortBroadcastThresholdExceeded
--
-- Specific Trap Type Code - 0x122
--
-- This trap is generated when the broadcast packets (per time
-- interval) have exceeded the threshold for the given port.
--
-- The Interesting Information is:
-- portBroadThreshold { portBroad 2 }
-- devTimeBase { device 24 }
-- boardIndex { commonB 1 }
-- portIndex { commonP 1 }
--
-- Trap Description
-- BoardLockSTATUSChanged
-- Specific Trap Type Code - 0x134
-- This trap is generated when the status of the address lock
-- changes for a certain board.
-- The Interesting Information is:
-- BoardIndex { rptrPortGrpMgmtEntry 1 }
-- BoardSrcAddrLockState { rptrPortGrpSrcAddrEntry 3 }
-- Trap Description
-- PortLockSTATUSChanged
-- Specific Trap Type Code - 0x135
-- This trap is generated when the status of the address lock
-- changes for a certain port.
-- The Interesting Information is:
-- BoardIndex { rptrPortGrpMgmtEntry 1 }
-- PortIndex { rptrPortMgmtEntry 1 }
-- PortSrcAddrLockState { rptrPortSrcAddrEntry 6 }
-- Token Ring Traps
--
-- Trap Description
--
-- stationLinked--
--
-- Specific Trap Type Code - 0x0201
--
-- This trap is generated in the event that a station port detects a
-- link. The interesting information included with this trap is the
-- board index and port index of the station port which detects link.
--
-- Trap Description
--
-- stationUnlinked
--
-- Specific Trap Type Code - 0x0202
--
-- This trap is generated in the event that a station port detects a
-- link has been removed. The interesting information included with this
-- trap is the board index and port index of the station port which detects
-- that the link has been removed.
-- Trap Description
--
-- ringSpeedFault
--
-- Specific Trap Type Code - 0x0203
--
-- This trap is generated when speed of the board differs from speed of
-- the data passing through the board. The interesting information included
-- with this trap is the board index of the board which detects the ring
-- speed fault.
-- Trap Description
--
-- ringSpeedFaultCleared
--
-- Specific Trap Type Code - 0x0204
--
-- This trap is generated when ring speed fault has been corrected. The
-- interesting information included with this trap is the board index of the
-- board which detects the ring speed fault condition has been removed.
-- Trap Description
--
-- autoWrapWireFault
--
-- Specific Trap Type Code - 0x0205
--
-- This trap is generated when the Shielded Twisted Pair ring port has
-- detected that the phantom current asserted on it does not detect the
-- correct voltage of the received phantom current. The interesting
-- information included with this trap is the board index and the port index
-- of the ring port which detects the autoWrapWireFault.
-- Trap Description
--
-- autoWrapWireFaultCleared
--
-- Specific Trap Type Code - 0x0206
--
-- This trap is generated when the autoWrapWireFault conditions have been
-- removed. The interesting information included with this trap is the board
-- index and the port index of the ring port which detects that the
-- autoWrapWireFault conditions have been removed.
--
--
-- Appendix A - Media type values
--
-- Board Type Value
--
-- Management Modules
-- IRM-2 0xB0
-- IRBM 0xB1
-- IRM-3 0xB2
-- TRMBM-R 0xB4
-- TRMBM-S 0xB5
-- EFDMIM 0xB6
-- ETBMIM 0xB7
-- TRBMIM 0xB8
-- TRMM 0xBB
-- ETWMIM 0xBD
-- TRMMIM 0xBE
-- MiniMMAC 0x10010
-- MRXI 0x30043
-- MRXI-2 0x30042
-- MRXI-28 0x300A0
--
-- Mim Types
-- THNMIM 0x10 or 0x50
-- MT8MIM 0xA0
-- FOTMIM (6 ports) 0xE0
-- FOTMIM (12 ports) 0xC0
-- TPTMIM 0xD0
-- TPMIM-T 0x42
-- TPMIM-T1 0x41
-- TPMIM-T3 0x43
-- TPMIM-24 0x60
-- TPMIM-22 0x61
-- TPMIM-34 0x62
-- TPMIM-32 0x63
-- FOMIM-18 0x90
-- FOMIM-12 0x92
-- FOMIM-16 0x93
-- FOMIM-28 0x94
-- FOMIM-22 0x96
-- FOMIM-26 0x97
-- FOMIM-38 0x98
-- FOMIM-32 0x9A
-- FOMIM-36 0x9B
-- TPRMIM-36 0x70
-- TPRMIM-33 0x71
-- CXRMIM 0x72
-- FORMIM-22 0x73
-- TRMIM-12 0x30
-- TRMIM-10R 0x31
-- TRMIM-10RA 0x131 (will be displayed as TR-10R)
-- TRMIM-22 0x32
-- TRMIM-20R 0x33
-- TRMIM-20RA 0x133 (will be displayed as TR-20R)
-- TRMIM-24A 0x36
-- TRMIM-22A 0x37
-- FTRMIM-28 0x38
-- FTRMIM-22 0x39
-- FTRMIM-26 0x3B
-- TRMIM-34A 0x3C
-- TRMIM-32A 0x3D
-- TRMIM-44A 0x3E
-- TRMIM-42A 0x3F
-- TRRMIM-A 0x3A
-- TRRMIM-2A 0x13A
-- TRRMIM-4A 0x23A
-- FDMMIM-00 0x23
-- FDMMIM-04 0x22
-- FDMMIM-16 0x21
-- FDMMIM-26 0x20
-- FDMMIM-00S 0x27
-- FDMMIM-04S 0x26
-- FDMMIM-16S 0x25
-- FDMMIM-26S 0x24
-- FDCMIM-04 0x2B
-- FDCMIM-08 0x2A
-- FDCMIM-16 0x2F
-- FDCMIM-12 0x2D
-- FDCMIM-26 0x2C
-- FDCMIM-22 0x28
-- Third party Mims
-- CISCO Ethernet to Ethernet Router Mim 0x01
-- Xyplex 16 port terminal server. ETSMIM 0x02
-- SGI CPU MIM 0x03
-- CAYMAN Appletalk to Ethernet Router. GATORMIM CS 0x04
-- NOVELL LANTERN ethernet SNMP Monitor. LANTERMIM 0x05
-- CISCO Ethernet to Ethernet Router Mim. CRM-L 0x06
-- CISCO Ethernet to WAN Router Mim. CRM-S 0x07
-- Cayman 1 GATOR STAR GX.M 0x08
-- Cayman 2 0x09
-- Cayman 3 0x0A
-- Cayman 4 0x0B
-- Multi-Port Interfaces Modules
-- MPIM-X 0x20000
-- MPIM-A 0x20001
-- MPIM-C 0x20002
-- MPIM-T 0x20003
-- MPIM-F2 0x20004
-- MPIM-F1 0x20005
-- MPIM-T1 0x20006
-- MPIM-B 0x20007 - BLANK
--
--
-- Single-Port Interface Modules
--
-- SPIM-C 0x20002
-- SPIM-T 0x20003
-- SPIM-F2 0x20004
-- SPIM-F1 0x20005
-- SPIM-T1 0x20006
-- SPIM-B 0x20007 - BLANK
--
--
END
Reference in New Issue View Git Blame Copy Permalink