librenms/mibs/ENTERASYS-RADIUS-ACCT-CLIENT-EXT-MIB
Adam Amstrong 6b9d05653c move Enterasys mibs to mib root
git-svn-id: http://www.observium.org/svn/observer/trunk@1569 61d68cd4-352d-0410-923a-c4978735b2b8
2010-07-31 12:40:45 +00:00

451 lines
17 KiB
Plaintext

ENTERASYS-RADIUS-ACCT-CLIENT-EXT-MIB DEFINITIONS ::= BEGIN
--
-- Part Number: <TBD>
--
--
-- This module provides authoritative definitions for Enterasys
-- Network's RADIUS Accounting Client MIB.
--
-- This module will be extended, as needed.
-- Enterasys Networks reserves the right to make changes in this
-- specification and other information contained in this document
-- without prior notice. The reader should consult Enterasys Networks
-- to determine whether any such changes have been made.
--
-- In no event shall Enterasys Networks be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Enterasys
-- Networks has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Enterasys Networks grants vendors, end-users, and other interested
-- parties a non-exclusive license to use this Specification in
-- connection with the management of Enterasys Networks products.
-- Copyright July, 2002-2004 Enterasys Networks, Inc.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
Integer32 FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
TruthValue, RowStatus FROM SNMPv2-TC
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
etsysModules FROM ENTERASYS-MIB-NAMES;
etsysRadiusAcctClientMIB MODULE-IDENTITY
LAST-UPDATED "200411121523Z" -- Fri Nov 12 15:23 GMT 2004
ORGANIZATION "Enterasys Networks"
CONTACT-INFO
"Postal: Enterasys Networks
50 Minuteman Rd.
Andover, MA 01810-1008
USA
Phone: +1 978 684 1000
E-mail: support@enterasys.com
WWW: http://www.enterasys.com"
DESCRIPTION
"This MIB module defines a portion of the SNMP enterprise
MIBs under Enterasys Networks' enterprise OID pertaining to
the client side of the Remote Access Dialin User Service
(RADIUS) Accounting protocol (RFC2866).
This MIB provides read-write access to configuration objects
not provided in the standard RADIUS Accounting Client
MIB (RFC2620). However, the write capability must only
be supported for SNMPv3, or other SNMP versions with
adequately strong security.
Security concerns include Object ID verification, source
address verification and timeliness verification."
REVISION "200411121523Z" -- Fri Nov 12 15:23 GMT 2004
DESCRIPTION
"Removed the UNITS clause from the
etsysRadiusAcctClientServerRetries object."
REVISION "200409091437Z" -- Thu Sep 9 14:37 GMT 2004
DESCRIPTION
"Added UNITS clauses to a number of objects that are expressed
in seconds, and DEFVAL clauses for the
etsysRadiusAcctClientUpdateInterval and
etsysRadiusAcctClientIntervalMinimum objects."
REVISION "200408301555Z" -- Mon Aug 30 15:55 GMT 2004
DESCRIPTION
"In the columnar objects in etsysRadiusAcctClientServerTable,
changed the MAX-ACCESS clauses of the read-write objects to
read-create, added DEFVAL clauses to a number of the objects,
and modified the DESCRIPTION clause for the RowStatus object
to resolve a conflict between the syntax and the description.
Deprecated the etsysRadiusAcctClientServerClearTime object.
Changed a number of objects with SYNTAX clauses of INTEGER
to Integer32."
REVISION "200408251503Z" -- Wed Aug 25 15:03 GMT 2004
DESCRIPTION
"Changed etsysRadiusClientMIBCompliance to
etsysRadiusAcctClientMIBCompliance due to
a conflict with the etsysRadiusAcctClientMIB."
REVISION "200209131930Z" -- Fri Sep 13 19:30 GMT 2002
DESCRIPTION
"The Initial version of this MIB module."
::= { etsysModules 27 }
-- ------------------------------------
-- MIB Objects
-- ------------------------------------
etsysRadiusAcctClientMIBObjects
OBJECT IDENTIFIER ::= { etsysRadiusAcctClientMIB 1 }
etsysRadiusAcctClientEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether or not RADIUS Accounting
is enabled or disabled. This parameter value is maintained
across system reboots."
DEFVAL { disable }
::= { etsysRadiusAcctClientMIBObjects 1 }
etsysRadiusAcctClientUpdateInterval OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates how many seconds elapse between accounting
interim updates. This parameter value is maintained across
system reboots. A value of zero means no Interim Updates.
If the value is less than etsysRadiusAcctClientIntervalMinimum,
the etsysRadiusAcctClientIntervalMinimum value will be used
for the update interval time. If RADIUS Accounting is not
enabled, this object is ignored. Note that Accounting
Interim Updates are not issued by the RADIUS Accounting
Client, unless so requested by the RADIUS Server in an Access
Accept packet."
DEFVAL { 1800 }
::= { etsysRadiusAcctClientMIBObjects 2 }
etsysRadiusAcctClientIntervalMinimum OBJECT-TYPE
SYNTAX Integer32 (60..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the minimum value in seconds between
accounting interim updates supported by the managed
entity. This parameter value is maintained across
system reboots. If RADIUS Accounting is not enabled,
this object is ignored."
DEFVAL { 600 }
::= { etsysRadiusAcctClientMIBObjects 3 }
etsysRadiusAcctClientServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysRadiusAcctClientServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the RADIUS Accounting
servers."
::= { etsysRadiusAcctClientMIBObjects 4 }
etsysRadiusAcctClientServerEntry OBJECT-TYPE
SYNTAX EtsysRadiusAcctClientServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a RADIUS
Accounting server with which the client shares
a secret. If RADIUS Accounting is not enabled, this
table is ignored.
All created conceptual rows are non-volatile and as such
must be maintained upon restart of the agent."
INDEX { etsysRadiusAcctClientServerIndex }
::= { etsysRadiusAcctClientServerTable 1 }
EtsysRadiusAcctClientServerEntry ::=
SEQUENCE {
etsysRadiusAcctClientServerIndex Integer32,
etsysRadiusAcctClientServerAddressType InetAddressType,
etsysRadiusAcctClientServerAddress InetAddress,
etsysRadiusAcctClientServerPortNumber Integer32,
etsysRadiusAcctClientServerSecret OCTET STRING,
etsysRadiusAcctClientServerSecretEntered TruthValue,
etsysRadiusAcctClientServerRetryTimeout Integer32,
etsysRadiusAcctClientServerRetries Integer32,
etsysRadiusAcctClientServerClearTime Integer32,
etsysRadiusAcctClientServerStatus RowStatus
}
etsysRadiusAcctClientServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each conceptual row
in the etsysRadiusAcctClientServerTable.
In the event of an agent restart, the same value
of etsysRadiusAcctClientServerIndex must be used to
identify each conceptual row in
etsysRadiusAcctClientServerTable as was used prior
to the restart."
::= { etsysRadiusAcctClientServerEntry 1 }
etsysRadiusAcctClientServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of Internet address by which the
RADIUS Accounting server is reachable."
DEFVAL { ipv4 }
::= { etsysRadiusAcctClientServerEntry 2 }
etsysRadiusAcctClientServerAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Internet address for the RADIUS Accounting
server. Note that implementations must limit
themselves to a single entry in this table per
reachable server.
The etsysRadiusAcctClientServerAddress may not be
empty due to the SIZE restriction. Also the size
of a DNS name is limited to 64 characters.
This parameter value is maintained across system
reboots."
::= { etsysRadiusAcctClientServerEntry 3 }
etsysRadiusAcctClientServerPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The UDP port number (1-65535) the client is using
to send requests to this server. The officially
assigned port number for RADIUS Accounting is 1813.
This parameter value is maintained across system
reboots."
DEFVAL { 1813 }
::= { etsysRadiusAcctClientServerEntry 4 }
etsysRadiusAcctClientServerSecret OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is the secret shared between the RADIUS
Accounting server and RADIUS client. This
parameter value is maintained across system reboots.
While the 'official' MAX-ACCESS for this object is
read-create, all security-conscious implementations
will 'lie' on a read, and return a null-string, or
something else that is fairly innocuous. The
ability to read back passwords and secret
encryption keys is generally a Bad Thing (tm)."
::= { etsysRadiusAcctClientServerEntry 5 }
etsysRadiusAcctClientServerSecretEntered OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the existence of a shared secret."
::= { etsysRadiusAcctClientServerEntry 6 }
etsysRadiusAcctClientServerRetryTimeout OBJECT-TYPE
SYNTAX Integer32 (2..10)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds to wait for a RADIUS Accounting
Server to respond to a request. This parameter value
is maintained across system reboots."
DEFVAL { 5 }
::= { etsysRadiusAcctClientServerEntry 7 }
etsysRadiusAcctClientServerRetries OBJECT-TYPE
SYNTAX Integer32 (0..20)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of times to resend an accounting packet
if a RADIUS Accounting Server does not respond to a
request. This parameter value is maintained across
system reboots."
DEFVAL { 2 }
::= { etsysRadiusAcctClientServerEntry 8 }
etsysRadiusAcctClientServerClearTime OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"On a read, this value indicates the number of seconds
since the counters, as defined in the IETF standard
RADIUS Accounting Client MIB (RFC2618), were cleared.
On a write, the client counters will be cleared and
the clear time will be set to zero."
::= { etsysRadiusAcctClientServerEntry 9 }
etsysRadiusAcctClientServerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Lets users create and delete RADIUS Accounting
server entries on systems that support this
capability.
Rules
1. When creating a RADIUS Accounting Client, it
is up to the management station to determine a
suitable etsysRadiusAcctClientServerIndex.
To facilitate interoperability, agents should not
put any restrictions on the
etsysRadiusAcctClientServerIndex beyond the
obvious ones that it be valid and unused.
2. Before a new row can become 'active', values
must be supplied for the columnar objects
etsysRadiusAcctClientClientServerAddress,
and etsysRadiusAcctClientServerSecret.
3. The value of etsysRadiusAcctClientServerStatus
must be set to 'notInService' in order to modify
a writable object in the same conceptual row.
4. etsysRadiusAcctClientServer entries whose
status is 'notReady' or 'notInService' will
not be used for Accounting."
::= { etsysRadiusAcctClientServerEntry 10 }
-- ------------------------------------
-- Conformance information
-- ------------------------------------
etsysRadiusAcctClientMIBConformance
OBJECT IDENTIFIER ::= { etsysRadiusAcctClientMIB 2 }
etsysRadiusAcctClientMIBCompliances
OBJECT IDENTIFIER ::= { etsysRadiusAcctClientMIBConformance 1 }
etsysRadiusAcctClientMIBGroups
OBJECT IDENTIFIER ::= { etsysRadiusAcctClientMIBConformance 2 }
-- ------------------------------------
-- Units of conformance
-- ------------------------------------
etsysRadiusAcctClientMIBGroup OBJECT-GROUP
OBJECTS { etsysRadiusAcctClientEnable,
etsysRadiusAcctClientUpdateInterval,
etsysRadiusAcctClientIntervalMinimum,
etsysRadiusAcctClientServerAddressType,
etsysRadiusAcctClientServerAddress,
etsysRadiusAcctClientServerPortNumber,
etsysRadiusAcctClientServerSecret,
etsysRadiusAcctClientServerSecretEntered,
etsysRadiusAcctClientServerRetryTimeout,
etsysRadiusAcctClientServerRetries,
etsysRadiusAcctClientServerClearTime,
etsysRadiusAcctClientServerStatus
}
STATUS deprecated
DESCRIPTION
"The basic collection of objects providing a proprietary
extension to the standard RADIUS Client MIB.
This MIB provides read-write access to configuration
objects not provided in the standard RADIUS Accounting Client
MIB (RFC2618). However, the write capability must only
be supported for SNMPv3, or other SNMP versions with
adequately strong security."
::= { etsysRadiusAcctClientMIBGroups 1 }
etsysRadiusAcctClientMIBGroupV2 OBJECT-GROUP
OBJECTS { etsysRadiusAcctClientEnable,
etsysRadiusAcctClientUpdateInterval,
etsysRadiusAcctClientIntervalMinimum,
etsysRadiusAcctClientServerAddressType,
etsysRadiusAcctClientServerAddress,
etsysRadiusAcctClientServerPortNumber,
etsysRadiusAcctClientServerSecret,
etsysRadiusAcctClientServerSecretEntered,
etsysRadiusAcctClientServerRetryTimeout,
etsysRadiusAcctClientServerRetries,
etsysRadiusAcctClientServerStatus
}
STATUS current
DESCRIPTION
"The basic collection of objects providing a proprietary
extension to the standard RADIUS Client MIB.
etsysRadiusAcctClientServerClearTime was deprecated in
this group."
::= { etsysRadiusAcctClientMIBGroups 2 }
-- ------------------------------------
-- Compliance statements
-- ------------------------------------
-- The following object name conflicts with one in the
-- etsysRadiusAuthClientMIB
--
-- etsysRadiusClientMIBCompliance MODULE-COMPLIANCE
-- STATUS current
-- DESCRIPTION
-- "The compliance statement for Accounting clients
-- implementing the RADIUS Accounting Client MIB."
-- MODULE - this module
-- MANDATORY-GROUPS { etsysRadiusAcctClientMIBGroup }
--
-- ::= { etsysRadiusAcctClientMIBCompliances 1 }
etsysRadiusAcctClientMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for Accounting clients
implementing the RADIUS Accounting Client MIB."
MODULE -- this module
MANDATORY-GROUPS { etsysRadiusAcctClientMIBGroup }
::= { etsysRadiusAcctClientMIBCompliances 2 }
etsysRadiusAcctClientMIBComplianceV2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for Accounting clients
implementing the RADIUS Accounting Client MIB."
MODULE -- this module
MANDATORY-GROUPS { etsysRadiusAcctClientMIBGroupV2 }
::= { etsysRadiusAcctClientMIBCompliances 3 }
END