mirror of
https://github.com/librenms/librenms.git
synced 2024-09-21 18:38:25 +00:00
6b9d05653c
git-svn-id: http://www.observium.org/svn/observer/trunk@1569 61d68cd4-352d-0410-923a-c4978735b2b8
657 lines
22 KiB
Plaintext
657 lines
22 KiB
Plaintext
ENTERASYS-POWER-ETHERNET-EXT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- enterasys-power-ethernet-mib-ext-mib.txt
|
|
--
|
|
-- Part Number:
|
|
--
|
|
--
|
|
|
|
-- This module provides authoritative definitions for Enterasys
|
|
-- Networks' Power Ethernet Extensions MIB.
|
|
|
|
--
|
|
-- This module will be extended, as needed.
|
|
|
|
-- Enterasys Networks reserves the right to make changes in this
|
|
-- specification and other information contained in this document
|
|
-- without prior notice. The reader should consult Enterasys Networks
|
|
-- to determine whether any such changes have been made.
|
|
--
|
|
-- In no event shall Enterasys Networks be liable for any incidental,
|
|
-- indirect, special, or consequential damages whatsoever (including
|
|
-- but not limited to lost profits) arising out of or related to this
|
|
-- document or the information contained in it, even if Enterasys
|
|
-- Networks has been advised of, known, or should have known, the
|
|
-- possibility of such damages.
|
|
--
|
|
-- Enterasys Networks grants vendors, end-users, and other interested
|
|
-- parties a non-exclusive license to use this Specification in
|
|
-- connection with the management of Enterasys Networks products.
|
|
|
|
-- Copyright 2004-2005 Enterasys Networks, Inc.
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
Integer32, Unsigned32, Gauge32
|
|
FROM SNMPv2-SMI
|
|
pethMainPseEntry, pethPsePortEntry
|
|
FROM POWER-ETHERNET-MIB
|
|
entPhysicalIndex
|
|
FROM ENTITY-MIB
|
|
EnabledStatus
|
|
FROM P-BRIDGE-MIB
|
|
etsysModules
|
|
FROM ENTERASYS-MIB-NAMES;
|
|
|
|
etsysPowerEthernetMibExtMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200501101630Z" -- Mon Jan 10 16:30 GMT 2005
|
|
ORGANIZATION "Enterasys Networks, Inc"
|
|
CONTACT-INFO
|
|
"Postal: Enterasys Networks
|
|
50 Minuteman Rd.
|
|
Andover, MA 01810-1008
|
|
USA
|
|
Phone: +1 978 684 1000
|
|
E-mail: support@enterasys.com
|
|
WWW: http://www.enterasys.com"
|
|
|
|
DESCRIPTION
|
|
"This MIB module defines a portion of the SNMP MIB under
|
|
the Enterasys Networks enterprise OID pertaining to the
|
|
allocation of power in a Pse chassis."
|
|
|
|
REVISION "200501101630Z" -- Mon Jan 10 16:30 GMT 2005
|
|
DESCRIPTION
|
|
"Added the power management functionality."
|
|
|
|
REVISION "200408172227Z" -- Tue Aug 17 22:27 GMT 2004
|
|
DESCRIPTION
|
|
"The initial version of this MIB module"
|
|
|
|
::= { etsysModules 50 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- MIB Objects
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPowerEthernetObjects OBJECT IDENTIFIER
|
|
::= { etsysPowerEthernetMibExtMIB 1 }
|
|
|
|
etsysPseChassisPowerAllocation OBJECT IDENTIFIER
|
|
::= { etsysPowerEthernetObjects 1 }
|
|
|
|
etsysPseSlotPowerAllocation OBJECT IDENTIFIER
|
|
::= { etsysPowerEthernetObjects 2 }
|
|
|
|
etsysPseChassisPowerStatus OBJECT IDENTIFIER
|
|
::= { etsysPowerEthernetObjects 3 }
|
|
|
|
etsysPseSlotPowerManagement OBJECT IDENTIFIER
|
|
::= { etsysPowerEthernetObjects 4 }
|
|
|
|
etsysPsePortPowerManagement OBJECT IDENTIFIER
|
|
::= { etsysPowerEthernetObjects 5 }
|
|
|
|
etsysPsePowerNotification OBJECT IDENTIFIER
|
|
::= { etsysPowerEthernetObjects 0 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Pse Chassis Power Allocation Group
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPseChassisPowerAllocationMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto (1),
|
|
manual (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In auto mode, a Pse Power Management Algorithm handles the
|
|
allocation of power to all the modules.
|
|
|
|
In manual mode, power is manually allocated to the modules
|
|
via the etsysPseSlotPowerAllocationTable.
|
|
|
|
The value of etsysPseChassisPowerAllocationAvailable is used
|
|
to determine the power available for allocation in this
|
|
chassis in both auto and manual mode.
|
|
|
|
Maintaining the value of this object across agent reboots
|
|
is REQUIRED."
|
|
DEFVAL { auto }
|
|
::= { etsysPseChassisPowerAllocation 1 }
|
|
|
|
etsysPseChassisPowerSnmpNotification OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of the SNMP Notification functionality for
|
|
Pse.
|
|
|
|
enabled (1) - The Pse will generate SNMP Notifications for
|
|
potentially adverse Pse power conditions.
|
|
The generation of these notifications are NOT
|
|
dependant upon the state of
|
|
etsysPseChassisPowerAllocationMode.
|
|
|
|
disabled (2) - The SNMP Notifications defined in this MIB will
|
|
NOT be generated under any conditions.
|
|
|
|
Agents are not required to generate SNMP Notifications for
|
|
conditions that exist when this object is set to enabled.
|
|
|
|
Maintaining the value of this object across agent reboots is
|
|
REQUIRED."
|
|
::= { etsysPseChassisPowerAllocation 2 }
|
|
|
|
etsysPseChassisPowerAvailableMaximum OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum percentage of power from the Pse Power Supply
|
|
that this chassis can use.
|
|
|
|
The default value should be 100 percent, meaning the
|
|
chassis can use all the power detected from Pse Power
|
|
Supply.
|
|
|
|
Maintaining the value of this object across agent reboots
|
|
is REQUIRED."
|
|
DEFVAL { 100 }
|
|
::= { etsysPseChassisPowerAllocation 3 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Pse Slot Power Allocation Group
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPseSlotPowerAllocationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysPseModulePowerAllocationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power allocation management information for all slots."
|
|
::= { etsysPseSlotPowerAllocation 1 }
|
|
|
|
etsysPseSlotPowerAllocationEntry OBJECT-TYPE
|
|
SYNTAX EtsysPseModulePowerAllocationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power allocation management information for an entPhysicalEntry
|
|
that has an entPhysicalClass of container(5) and represents a
|
|
slot in the chassis that could be occupied by a Pse module."
|
|
INDEX { entPhysicalIndex }
|
|
::= { etsysPseSlotPowerAllocationTable 1 }
|
|
|
|
EtsysPseModulePowerAllocationEntry ::=
|
|
SEQUENCE {
|
|
etsysPseSlotPowerMaximum Unsigned32,
|
|
etsysPseSlotPowerAssigned Unsigned32
|
|
}
|
|
|
|
etsysPseSlotPowerMaximum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Watts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum power that can be consumed by the module in
|
|
this slot, based on the module's characteristics. For
|
|
slots without Pse modules this object MUST return zero."
|
|
::= { etsysPseSlotPowerAllocationEntry 1 }
|
|
|
|
etsysPseSlotPowerAssigned OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Watts"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power that will be allocated to this slot in manual mode.
|
|
In auto mode, this object has no effect.
|
|
|
|
Maintaining the value of this object across agent reboots
|
|
is REQUIRED."
|
|
DEFVAL { 0 }
|
|
::= { etsysPseSlotPowerAllocationEntry 2 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Pse Chassis Power Status Group
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPseChassisPowerDetected OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "Watts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total power detected by the chassis from Pse Power Supply."
|
|
::= { etsysPseChassisPowerStatus 1 }
|
|
|
|
etsysPseChassisPowerAvailable OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "Watts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total power available for this chassis. This is
|
|
( etsysPseChassisPowerDetected *
|
|
( etsysPseChassisPowerAvailableMaximum / 100 ) )."
|
|
::= { etsysPseChassisPowerStatus 2 }
|
|
|
|
etsysPseChassisPowerConsumable OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "Watts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total power that could be consumed by all of the Pse
|
|
modules in the chassis. This is the summation of the values
|
|
of all of the etsysPseSlotPowerMaximum objects."
|
|
::= { etsysPseChassisPowerStatus 3 }
|
|
|
|
etsysPseChassisPowerAssigned OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Watts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total power assigned to the slots in the chassis.
|
|
This is the summation of the values of all of the
|
|
etsysPseSlotPowerAssigned objects."
|
|
::= { etsysPseChassisPowerStatus 4 }
|
|
|
|
etsysPseChassisPowerRedundancy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
redundant (1),
|
|
notRedundant (2),
|
|
notSupported (3) -- Object is not supported
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes whether or not the Pse power system has redundant
|
|
capacity."
|
|
::= { etsysPseChassisPowerStatus 5 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Pse Module Power Management Group
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPseModulePowerManagementTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysPseModulePowerManagementEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table augments the pethMainPseTable of the
|
|
PowerEthernetMIB (rfc3621). It provides objects
|
|
that are used to budget power."
|
|
::= { etsysPseSlotPowerManagement 1 }
|
|
|
|
etsysPseModulePowerManagementEntry OBJECT-TYPE
|
|
SYNTAX EtsysPseModulePowerManagementEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that display, control, and calculate
|
|
the power consumption of a PSE."
|
|
AUGMENTS { pethMainPseEntry }
|
|
::= { etsysPseModulePowerManagementTable 1 }
|
|
|
|
EtsysPseModulePowerManagementEntry ::=
|
|
SEQUENCE {
|
|
etsysPseModulePowerMode INTEGER,
|
|
etsysPseModulePowerClassBudget Gauge32,
|
|
etsysPseModulePowerUsage Integer32
|
|
}
|
|
|
|
etsysPseModulePowerMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
realtime (1),
|
|
class (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the power management of the PSE.
|
|
It also controls how etsysPseModulePowerClassBudget,
|
|
etsysPseModulePowerUsage and etsysPsePortPowerLimit are
|
|
utilized.
|
|
|
|
In realtime mode, the power is managed based on the
|
|
actual power consumption of the ports.
|
|
etsysPseModulePowerClassBudget is sum of power
|
|
consumed by all ports, measured in real-time. The
|
|
etsysPseModulePowerUsage is ratio of pethMainPseConsumptionPower
|
|
over pethMainPsePower, expressed in percents.
|
|
|
|
In class mode, the power is managed based on the IEEE 802.3af
|
|
definition of the class upper limit, except classes 0 & 4
|
|
for which the actual power consumption is used.
|
|
etsysPseModulePowerClassBudget is sum of all ports
|
|
power according to their class upper bound, except classes 0 & 4
|
|
for which the actual power consumption is accounted.
|
|
The etsysPseModulePowerUsage is ratio of
|
|
etsysPseModulePowerClassBudget over pethMainPsePower, expressed
|
|
in percents.
|
|
|
|
The effect of etsysPseModulePowerMode to etsysPsePortPowerLimit is
|
|
described in etsysPsePortPowerLimit definition.
|
|
|
|
Maintaining the value of this object across agent reboots
|
|
is REQUIRED."
|
|
DEFVAL { realtime }
|
|
::= { etsysPseModulePowerManagementEntry 1 }
|
|
|
|
etsysPseModulePowerClassBudget OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "Watts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In class mode, this is sum of all ports power according to
|
|
their class upper bound, except classes 0 & 4 for which the
|
|
actual power consumption is accounted. In realtime mode,
|
|
this is sum of power consumed by all ports, measured in
|
|
real-time."
|
|
::= { etsysPseModulePowerManagementEntry 2 }
|
|
|
|
etsysPseModulePowerUsage OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "%"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In class mode, this is ratio of etsysPseModulePowerClassBudget
|
|
over pethMainPsePower, expressed in percents.
|
|
In realtime mode, this is ratio of pethMainPseConsumptionPower
|
|
over pethMainPsePower, expressed in percents."
|
|
::= { etsysPseModulePowerManagementEntry 3 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Pse Port Power Management Group
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPsePortPowerManagementTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysPsePortPowerManagementEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table augments the pethPsePortTable of the
|
|
PowerEthernetMIB (rfc3621). It provides objects
|
|
that are used to budget power."
|
|
::= { etsysPsePortPowerManagement 1 }
|
|
|
|
etsysPsePortPowerManagementEntry OBJECT-TYPE
|
|
SYNTAX EtsysPsePortPowerManagementEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that display and control the power
|
|
consumption of a PSE, at the port level."
|
|
AUGMENTS { pethPsePortEntry }
|
|
::= { etsysPsePortPowerManagementTable 1 }
|
|
|
|
EtsysPsePortPowerManagementEntry ::=
|
|
SEQUENCE {
|
|
etsysPsePortPowerLimit Integer32,
|
|
etsysPsePortPowerUsage Gauge32,
|
|
etsysPsePortPDType INTEGER
|
|
}
|
|
|
|
etsysPsePortPowerLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (0..15400)
|
|
UNITS "milliwatts"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object sets the maximum power allowed on this port.
|
|
If the port exceeds its power limit, it will be shut down.
|
|
This object has effect only when its module is in realtime
|
|
mode (specified by etsysPseModulePowerMode). In class mode,
|
|
the power limit of a port is defined by port's class upper
|
|
bound, according to IEEE 802.3af."
|
|
DEFVAL { 15400 }
|
|
::= { etsysPsePortPowerManagementEntry 1 }
|
|
|
|
etsysPsePortPowerUsage OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliwatts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual power consumption measured in real-time."
|
|
::= { etsysPsePortPowerManagementEntry 2 }
|
|
|
|
etsysPsePortPDType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
legacy (1),
|
|
ieee8023af (2),
|
|
other (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates detected PD type on this port."
|
|
::= { etsysPsePortPowerManagementEntry 3 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Pse Power Supply Status Table
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPsePowerSupplyStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysPsePowerSupplyStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status information for all of the Pse power supply modules."
|
|
::= { etsysPseChassisPowerStatus 6 }
|
|
|
|
etsysPsePowerSupplyStatusEntry OBJECT-TYPE
|
|
SYNTAX EtsysPsePowerSupplyStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status information for an individual Pse power supply module."
|
|
INDEX { etsysPsePowerSupplyModuleNumber }
|
|
::= { etsysPsePowerSupplyStatusTable 1 }
|
|
|
|
EtsysPsePowerSupplyStatusEntry ::=
|
|
SEQUENCE {
|
|
etsysPsePowerSupplyModuleNumber Unsigned32,
|
|
etsysPsePowerSupplyModuleStatus INTEGER
|
|
}
|
|
|
|
etsysPsePowerSupplyModuleNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique number that identifies the Pse power supply
|
|
and is relative to the module's physical location."
|
|
::= { etsysPsePowerSupplyStatusEntry 1 }
|
|
|
|
etsysPsePowerSupplyModuleStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
infoNotAvailable (1),
|
|
notInstalled (2),
|
|
installedAndOperating (3),
|
|
installedAndNotOperating (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the power supply's status."
|
|
::= { etsysPsePowerSupplyStatusEntry 2 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Pse Power Notifications Group
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPseChassisPowerRedundant NOTIFICATION-TYPE
|
|
OBJECTS { etsysPseChassisPowerDetected }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Pse chassis power is in redundant state. At least 500 msec
|
|
must elapse between notifications being emitted by the same
|
|
object instance."
|
|
::= { etsysPsePowerNotification 1 }
|
|
|
|
etsysPseChassisPowerNonRedundant NOTIFICATION-TYPE
|
|
OBJECTS { etsysPseChassisPowerDetected }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Pse chassis power is in non-redundant state. At least 500
|
|
msec must elapse between notifications being emitted by the
|
|
same object instance."
|
|
::= { etsysPsePowerNotification 2 }
|
|
|
|
etsysPsePowerSupplyModuleStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { etsysPsePowerSupplyModuleStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Pse Power Supply module has changed state. At least 500
|
|
msec must elapse between notifications being emitted by the
|
|
same object instance."
|
|
::= { etsysPsePowerNotification 3 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Conformance Information
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPsePowerAllocationConformance OBJECT IDENTIFIER
|
|
::= { etsysPowerEthernetMibExtMIB 2 }
|
|
|
|
etsysPsePowerAllocationGroups OBJECT IDENTIFIER
|
|
::= { etsysPsePowerAllocationConformance 1 }
|
|
|
|
etsysPsePowerAllocationCompliances OBJECT IDENTIFIER
|
|
::= { etsysPsePowerAllocationConformance 2 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Units of conformance
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPsePowerAllocationControlGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysPseChassisPowerAllocationMode,
|
|
etsysPseChassisPowerSnmpNotification,
|
|
etsysPseChassisPowerAvailableMaximum,
|
|
etsysPseSlotPowerMaximum,
|
|
etsysPseSlotPowerAssigned
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power over Ethernet Power Allocation Control group."
|
|
::= { etsysPsePowerAllocationGroups 1 }
|
|
|
|
etsysPseChassisPowerStatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysPseChassisPowerDetected,
|
|
etsysPseChassisPowerAvailable,
|
|
etsysPseChassisPowerConsumable,
|
|
etsysPseChassisPowerAssigned,
|
|
etsysPseChassisPowerRedundancy,
|
|
etsysPsePowerSupplyModuleStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power over Ethernet Power Supply group."
|
|
::= { etsysPsePowerAllocationGroups 2 }
|
|
|
|
etsysPsePowerNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
etsysPseChassisPowerRedundant,
|
|
etsysPseChassisPowerNonRedundant,
|
|
etsysPsePowerSupplyModuleStatusChange
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power over Ethernet Power Redundancy Notifications group."
|
|
::= { etsysPsePowerAllocationGroups 3 }
|
|
|
|
etsysPseModulePowerManagementGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysPseModulePowerMode,
|
|
etsysPseModulePowerClassBudget,
|
|
etsysPseModulePowerUsage
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power over Ethernet Module Power Budget Management group."
|
|
::= { etsysPsePowerAllocationGroups 4 }
|
|
|
|
etsysPsePortPowerManagementGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysPsePortPowerLimit,
|
|
etsysPsePortPowerUsage,
|
|
etsysPsePortPDType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power over Ethernet Port Power Budget Management group."
|
|
::= { etsysPsePowerAllocationGroups 5 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Compliance statements
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPsePowerAllocationCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for devices that support manual
|
|
power allocation."
|
|
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
etsysPsePowerAllocationControlGroup,
|
|
etsysPseChassisPowerStatusGroup,
|
|
etsysPsePowerNotificationGroup
|
|
}
|
|
|
|
::= { etsysPsePowerAllocationCompliances 1 }
|
|
|
|
etsysPsePowerAllocationCompliance2 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for devices that support
|
|
power budgets."
|
|
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
etsysPsePowerAllocationControlGroup,
|
|
etsysPseChassisPowerStatusGroup,
|
|
etsysPsePowerNotificationGroup
|
|
}
|
|
|
|
GROUP etsysPseModulePowerManagementGroup
|
|
DESCRIPTION
|
|
"This group is conditionally mandatory for entities that
|
|
support power management on a per module basis."
|
|
|
|
GROUP etsysPsePortPowerManagementGroup
|
|
DESCRIPTION
|
|
"This group is conditionally mandatory for entities that
|
|
support power management on a per port basis."
|
|
|
|
::= { etsysPsePowerAllocationCompliances 2 }
|
|
|
|
END
|