clones/librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-09-22 10:58:42 +00:00
Code Issues Packages Projects Releases Wiki Activity
fc08be2e34
librenms/mibs/CISCO-BGP4-MIB.my
Adam Amstrong 1a514e4cd4 many updates to BGP and interface printing 
git-svn-id: http://www.observium.org/svn/observer/trunk@396 61d68cd4-352d-0410-923a-c4978735b2b8
2009-03-30 11:20:18 +00:00

1170 lines
45 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-BGP4-MIB.my
--
-- June 2001, Ravindra Rathi
--
-- Copyright (c) 2001, 2003 by Cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-BGP4-MIB DEFINITIONS ::=BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32, Gauge32, Counter32
FROM SNMPv2-SMI
TruthValue,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
ciscoMgmt
FROM CISCO-SMI
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
bgpPeerEntry,
bgpPeerRemoteAddr,
bgpPeerLastError,
bgpPeerState
FROM BGP4-MIB;
ciscoBgp4MIB MODULE-IDENTITY
LAST-UPDATED "200302240000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-iprouting-bgp@cisco.com"
DESCRIPTION
"An extension to the IETF BGP4 MIB module defined in
RFC 1657.
Following is the terminology associated with Border
Gateway Protocol(BGP).
UPDATE message
UPDATE messages are used to transfer routing
information between BGP peers. An UPDATE message
is used to advertise a single feasible route to a
peer, or to withdraw multiple unfeasible routes
from service.
Adj-RIBs-In
The Adj-RIBs-In store routing information that has
been learned from inbound UPDATE messages. Their
contents represent routes that are available as an
input to the Decision Process.
Loc-RIB(BGP table)
The Loc-RIB contains the local routing information
that the BGP speaker has selected by applying its
local policies to the routing information contained
in its Adj-RIBs-In.
Adj-RIBs-Out
The Adj-RIBs-Out store the information that the
local BGP speaker has selected for advertisement to
its peers. The routing information stored in the
Adj-RIBs-Out will be carried in the local BGP
speaker's UPDATE messages and advertised to its
peers.
Path Attributes
A variable length sequence of path attributes is
present in every UPDATE. Each path attribute is a
triple <attribute type, attribute length,
attribute value> of variable length.
Network Layer Reachability Information(NLRI)
A variable length field present in UPDATE messages
which contains a list of Network Layer address
prefixes.
Address Family Identifier(AFI)
Primary identifier to indicate the type of the
Network Layer Reachability Information(NLRI) being
carried.
Subsequent Address Family Identifier(SAFI)
Secondary identifier to indicate the type of the
Network Layer Reachability Information(NLRI) being
carried."
REVISION "200302240000Z"
DESCRIPTION
"+Added cbgpPeerCapsTable
+Added cbgpPeerAddrFamilyTable
+Added cbgpPeerAddrFamilyPrefixTable
+Added notification event cbgpBackwardTransition
+Added notification event cbgpPrefixThresholdExceeded
+Added notification event cbgpPrefixThresholdClear"
REVISION "200212190000Z"
DESCRIPTION
"+Added cbgpPeerPrefixTable
+Added notification event cbgpFsmStateChange"
REVISION "200108130000Z"
DESCRIPTION
"Initial version of the MIB module."
::= { ciscoMgmt 187 }
ciscoBgp4MIBObjects
OBJECT IDENTIFIER ::= { ciscoBgp4MIB 1 }
cbgpRoute OBJECT IDENTIFIER ::= { ciscoBgp4MIBObjects 1 }
cbgpPeer OBJECT IDENTIFIER ::= { ciscoBgp4MIBObjects 2 }
-- Textual convention
CbgpSafi ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Subsequent Address Family Identifier(SAFI) is used
by BGP speaker to indicate the type of the the Network
Layer Reachability Information(NLRI) being carried.
RFC-2858 has defined the following values for SAFI.
1 - Network Layer Reachability Information used for
unicast forwarding
2 - Network Layer Reachability Information used for
multicast forwarding
3 - Network Layer Reachability Information used for
both unicast and multicast forwarding.
SAFI values 128 through 255 are for private use."
REFERENCE
"RFC-2858: Multiprotocol Extensions for BGP-4,
RFC-2547: BGP/MPLS VPNs"
SYNTAX INTEGER {
unicast(1),
multicast(2),
unicastAndMulticast(3),
vpn(128)
}
CbgpNetworkAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the Network Address prefix carried in the
BGP UPDATE messages. In the following table, column
'Type' gives the kind of Network Layer address which
will be stored in the object of this type based on the
values of Address Family Identifier(AFI) and SAFI.
AFI SAFI Type
ipv4(1) unicast(1) IPv4 address
ipv4(1) multicast(2) IPv4 address
ipv4(1) vpn(128) VPN-IPv4 address
ipv6(2) unicast(1) IPv6 address
A VPN-IPv4 address is a 12-byte quantity, beginning
with an 8-byte 'Route Distinguisher (RD)' and ending
with a 4-byte IPv4 address."
REFERENCE
"RFC-2858: Multiprotocol Extensions for BGP-4
RFC-2547: BGP/MPLS VPNs, section 4.1"
SYNTAX OCTET STRING (SIZE (0..255))
-- BGP4 Received Routes for all the supported address families
cbgpRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbgpRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about routes to
destination networks from all BGP4 peers. Since
BGP4 can carry routes for multiple Network Layer
protocols, this table has the Address Family
Identifier(AFI) of the Network Layer protocol as the
first index. Further for a given AFI, routes carried
by BGP4 are distinguished based on Subsequent Address
Family Identifiers(SAFI). Hence that is used as the
second index. Conceptually there is a separate Loc-RIB
maintained by the BGP speaker for each combination of
AFI and SAFI supported by it."
REFERENCE
"RFC-1771: A Border Gateway Protocol 4 (BGP-4),
RFC-2858: Multiprotocol Extensions for BGP-4,
RFC-2547: BGP/MPLS VPNs"
::= { cbgpRoute 1 }
cbgpRouteEntry OBJECT-TYPE
SYNTAX CbgpRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a path to a network received from
a peer."
INDEX { cbgpRouteAfi,
cbgpRouteSafi,
cbgpRoutePeerType,
cbgpRoutePeer,
cbgpRouteAddrPrefix,
cbgpRouteAddrPrefixLen }
::= { cbgpRouteTable 1 }
CbgpRouteEntry ::= SEQUENCE {
cbgpRouteAfi InetAddressType,
cbgpRouteSafi CbgpSafi,
cbgpRoutePeerType InetAddressType,
cbgpRoutePeer InetAddress,
cbgpRouteAddrPrefix CbgpNetworkAddress,
cbgpRouteAddrPrefixLen Unsigned32,
cbgpRouteOrigin INTEGER,
cbgpRouteASPathSegment OCTET STRING,
cbgpRouteNextHop CbgpNetworkAddress,
cbgpRouteMedPresent TruthValue,
cbgpRouteMultiExitDisc Unsigned32,
cbgpRouteLocalPrefPresent TruthValue,
cbgpRouteLocalPref Unsigned32,
cbgpRouteAtomicAggregate INTEGER,
cbgpRouteAggregatorAS Unsigned32,
cbgpRouteAggregatorAddrType InetAddressType,
cbgpRouteAggregatorAddr InetAddress,
cbgpRouteBest TruthValue,
cbgpRouteUnknownAttr OCTET STRING
}
cbgpRouteAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents Address Family Identifier(AFI) of the
Network Layer protocol associated with the route.
An implementation is only required to support IPv4
unicast and VPNv4 (Value - 1) address families."
::= { cbgpRouteEntry 1 }
cbgpRouteSafi OBJECT-TYPE
SYNTAX CbgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents Subsequent Address Family Identifier(SAFI)
of the route. It gives additional information about
the type of the route. An implementation is only
required to support IPv4 unicast(Value - 1) and VPNv4(
Value - 128) address families."
::= { cbgpRouteEntry 2 }
cbgpRoutePeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents the type of Network Layer address stored
in cbgpRoutePeer. An implementation is only required
to support IPv4 address type(Value - 1)."
::= { cbgpRouteEntry 3 }
cbgpRoutePeer OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Network Layer address of the peer where the route
information was learned. An implementation is only
required to support an IPv4 peer."
::= { cbgpRouteEntry 4 }
cbgpRouteAddrPrefix OBJECT-TYPE
SYNTAX CbgpNetworkAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Network Address prefix in the Network Layer
Reachability Information field of BGP UPDATE message.
This object is a Network Address containing the prefix
with length specified by cbgpRouteAddrPrefixLen. Any
bits beyond the length specified by
cbgpRouteAddrPrefixLen are zeroed."
::= { cbgpRouteEntry 5 }
cbgpRouteAddrPrefixLen OBJECT-TYPE
SYNTAX Unsigned32 (0..2040)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Length in bits of the Network Address prefix in the
Network Layer Reachability Information field."
::= { cbgpRouteEntry 6 }
cbgpRouteOrigin OBJECT-TYPE
SYNTAX INTEGER {
igp(1), -- networks are interior
egp(2), -- networks learned via EGP
incomplete(3) -- undetermined
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ultimate origin of the route information."
::= { cbgpRouteEntry 7 }
cbgpRouteASPathSegment OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence of AS path segments. Each AS
path segment is represented by a triple
<type, length, value>.
The type is a 1-octet field which has two
possible values:
1 AS_SET: unordered set of ASs a route in the
UPDATE message has traversed
2 AS_SEQUENCE: ordered set of ASs a route in the
UPDATE message has traversed.
The length is a 1-octet field containing the
number of ASs in the value field.
The value field contains one or more AS
numbers, each AS is represented in the octet
string as a pair of octets according to the
following algorithm:
first-byte-of-pair = ASNumber / 256;
second-byte-of-pair = ASNumber & 255;"
::= { cbgpRouteEntry 8 }
cbgpRouteNextHop OBJECT-TYPE
SYNTAX CbgpNetworkAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Network Layer address of the border router
that should be used for the destination network."
::= { cbgpRouteEntry 9 }
cbgpRouteMedPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the presence/absence of MULTI_EXIT_DISC
attribute for the route."
::= { cbgpRouteEntry 10 }
cbgpRouteMultiExitDisc OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This metric is used to discriminate between multiple
exit points to an adjacent autonomous system. The
value of this object is irrelevant if the value of
of cbgpRouteMedPresent is false(2)."
::= { cbgpRouteEntry 11 }
cbgpRouteLocalPrefPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the presence/absence of LOCAL_PREF
attribute for the route."
::= { cbgpRouteEntry 12 }
cbgpRouteLocalPref OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The degree of preference calculated by the local BGP4
speaker for the route. The value of this object is
irrelevant if the value of cbgpRouteLocalPrefPresent
is false(2)."
::= { cbgpRouteEntry 13 }
cbgpRouteAtomicAggregate OBJECT-TYPE
SYNTAX INTEGER {
lessSpecificRouteNotSelected(1),
lessSpecificRouteSelected(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether or not the local system has selected a less
specific route without selecting a more specific
route."
::= { cbgpRouteEntry 14 }
cbgpRouteAggregatorAS OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS number of the last BGP4 speaker that performed
route aggregation. A value of zero (0) indicates the
absence of this attribute."
::= { cbgpRouteEntry 15 }
cbgpRouteAggregatorAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the type of Network Layer address stored
in cbgpRouteAggregatorAddr."
::= { cbgpRouteEntry 16 }
cbgpRouteAggregatorAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Network Layer address of the last BGP4 speaker
that performed route aggregation. A value of all zeros
indicates the absence of this attribute."
::= { cbgpRouteEntry 17 }
cbgpRouteBest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether or not this route was chosen
as the best BGP4 route."
::= { cbgpRouteEntry 18 }
cbgpRouteUnknownAttr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One or more path attributes not understood by this
BGP4 speaker. Size zero (0) indicates the absence of
such attribute(s). Octets beyond the maximum size, if
any, are not recorded by this object.
Each path attribute is a triple <attribute type,
attribute length, attribute value> of variable length.
Attribute Type is a two-octet field that consists of
the Attribute Flags octet followed by the Attribute
Type Code octet. If the Extended Length bit of the
Attribute Flags octet is set to 0, the third octet of
the Path Attribute contains the length of the
attribute data in octets. If the Extended Length bit
of the Attribute Flags octet is set to 1, then the
third and the fourth octets of the path attribute
contain the length of the attribute data in octets.
The remaining octets of the Path Attribute represent
the attribute value and are interpreted according to
the Attribute Flags and the Attribute Type Code."
REFERENCE
"RFC-1771: A Border Gateway Protocol 4 (BGP-4),
section 4.3"
::= { cbgpRouteEntry 19 }
-- BGP Peer table.
cbgpPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbgpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP peer table. This table contains,
one entry per BGP peer, information about
the connections with BGP peers."
::= { cbgpPeer 1 }
cbgpPeerEntry OBJECT-TYPE
SYNTAX CbgpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the
connection with a BGP peer."
AUGMENTS { bgpPeerEntry }
::= { cbgpPeerTable 1 }
CbgpPeerEntry ::= SEQUENCE {
cbgpPeerPrefixAccepted Counter32,
cbgpPeerPrefixDenied Counter32,
cbgpPeerPrefixLimit Unsigned32,
cbgpPeerPrefixAdvertised Counter32,
cbgpPeerPrefixSuppressed Counter32,
cbgpPeerPrefixWithdrawn Counter32,
cbgpPeerLastErrorTxt SnmpAdminString,
cbgpPeerPrevState INTEGER
}
cbgpPeerPrefixAccepted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of Route prefixes received on this connnection,
which are accepted after applying filters. Possible
filters are route maps, prefix lists, distributed
lists, etc."
::= { cbgpPeerEntry 1 }
cbgpPeerPrefixDenied OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Counter which gets incremented when a route prefix
received on this connection is denied or when a route
prefix is denied during soft reset of this connection
if 'soft-reconfiguration' is on . This object is
initialized to zero when the peer is configured or
the router is rebooted"
::= { cbgpPeerEntry 2 }
cbgpPeerPrefixLimit OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Max number of route prefixes accepted on this
connection"
::= { cbgpPeerEntry 3 }
cbgpPeerPrefixAdvertised OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Counter which gets incremented when a route prefix
is advertised on this connection. This object is
initialized to zero when the peer is configured or
the router is rebooted"
::= { cbgpPeerEntry 4 }
cbgpPeerPrefixSuppressed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Counter which gets incremented when a route prefix
is suppressed from being sent on this connection. This
object is initialized to zero when the peer is
configured or the router is rebooted"
::= { cbgpPeerEntry 5 }
cbgpPeerPrefixWithdrawn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Counter which gets incremented when a route prefix
is withdrawn on this connection. This object is
initialized to zero when the peer is configured or
the router is rebooted"
::= { cbgpPeerEntry 6 }
cbgpPeerLastErrorTxt OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Implementation specific error description for
bgpPeerLastErrorReceived."
::= { cbgpPeerEntry 7 }
cbgpPeerPrevState OBJECT-TYPE
SYNTAX INTEGER {
none(0),
idle(1),
connect(2),
active(3),
opensent(4),
openconfirm(5),
established(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP peer connection previous state."
REFERENCE
"Section 8, RFC 1771, A Border Gateway Protocol 4
(BGP-4)."
::= { cbgpPeerEntry 8 }
--
-- Peer capabilities
--
cbgpPeerCapsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbgpPeerCapsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the capabilities that are
supported by a peer. Capabilities of a peer are
received during BGP connection establishment.
Values corresponding to each received capability
are stored in this table. When a new capability
is received, this table is updated with a new
entry. When an existing capability is not received
during the latest connection establishment, the
corresponding entry is deleted from the table."
REFERENCE
"RFC 2842, Capabilities Advertisement with
BGP-4.
RFC2818, Route Refresh Capability for BGP-4.
RFC2858, Multiprotocol Extensions for BGP-4.
draft-ietf-idr-restart-05.txt, Graceful Restart
Mechanism for BGP"
::= { cbgpPeer 2 }
cbgpPeerCapsEntry OBJECT-TYPE
SYNTAX CbgpPeerCapsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a capability received from a
peer with a particular code and an index. When a
capability is received multiple times with different
values during a BGP connection establishment,
corresponding entries are differentiated with indices."
INDEX {
bgpPeerRemoteAddr,
cbgpPeerCapCode,
cbgpPeerCapIndex
}
::= { cbgpPeerCapsTable 1 }
CbgpPeerCapsEntry ::= SEQUENCE {
cbgpPeerCapCode INTEGER,
cbgpPeerCapIndex Unsigned32,
cbgpPeerCapValue OCTET STRING
}
cbgpPeerCapCode OBJECT-TYPE
SYNTAX INTEGER {
multiProtocol(1),
routeRefresh(2),
gracefulRestart(64),
routeRefreshOld(128)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP Capability Advertisement Capability Code."
REFERENCE
"RFC 2842, Capabilities Advertisement with
BGP-4.
RFC2818, Route Refresh Capability for BGP-4.
RFC2858, Multiprotocol Extensions for BGP-4.
draft-ietf-idr-restart-05.txt, Graceful Restart
Mechanism for BGP"
::= { cbgpPeerCapsEntry 1 }
cbgpPeerCapIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multiple instances of a given capability may be
sent by a BGP speaker. This variable is used
to index them."
::= { cbgpPeerCapsEntry 2 }
cbgpPeerCapValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the announced capability. This
MIB object value is organized as given below,
Capability : Route Refresh Capability
Null string
Capability : Multiprotocol Extensions
+----------------------------------+
| AFI(16 bits) |
+----------------------------------+
| SAFI (8 bits) |
+----------------------------------+
Capability : Graceful Restart
+----------------------------------+
| Restart Flags (4 bits) |
+----------------------------------+
| Restart Time in seconds (12 bits)|
+----------------------------------+
| AFI(16 bits) |
+----------------------------------+
| SAFI (8 bits) |
+----------------------------------+
| Flags for Address Family (8 bits)|
+----------------------------------+
| ... |
+----------------------------------+
| AFI(16 bits) |
+----------------------------------+
| SAFI (8 bits) |
+----------------------------------+
| Flags for Address Family (8 bits)|
+----------------------------------+"
REFERENCE
"RFC 2842, Capabilities Advertisement with
BGP-4.
RFC2818, Route Refresh Capability for BGP-4.
RFC2858, Multiprotocol Extensions for BGP-4.
draft-ietf-idr-restart-05.txt, Graceful Restart
Mechanism for BGP"
::= { cbgpPeerCapsEntry 3 }
--
-- BGP Peer Address Family table
--
cbgpPeerAddrFamilyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbgpPeerAddrFamilyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information related to
address families supported by a peer. Supported
address families of a peer are known during BGP
connection establishment. When a new supported
address family is known, this table is updated
with a new entry. When an address family is not
supported any more, corresponding entry is deleted
from the table."
::= { cbgpPeer 3 }
cbgpPeerAddrFamilyEntry OBJECT-TYPE
SYNTAX CbgpPeerAddrFamilyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is identified by an AFI/SAFI pair and
peer address. It contains names associated with
an address family."
INDEX {
bgpPeerRemoteAddr,
cbgpPeerAddrFamilyAfi,
cbgpPeerAddrFamilySafi
}
::= { cbgpPeerAddrFamilyTable 1 }
CbgpPeerAddrFamilyEntry ::= SEQUENCE {
cbgpPeerAddrFamilyAfi InetAddressType,
cbgpPeerAddrFamilySafi CbgpSafi,
cbgpPeerAddrFamilyName SnmpAdminString
}
cbgpPeerAddrFamilyAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The AFI index of the entry. An implementation
is only required to support IPv4 unicast and
VPNv4 (Value - 1) address families."
::= { cbgpPeerAddrFamilyEntry 1 }
cbgpPeerAddrFamilySafi OBJECT-TYPE
SYNTAX CbgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SAFI index of the entry. An implementation
is only required to support IPv4 unicast(Value
- 1) and VPNv4( Value - 128) address families."
REFERENCE
"RFC-2858: Multiprotocol Extensions for BGP-4,
RFC-2547: BGP/MPLS VPNs"
::= { cbgpPeerAddrFamilyEntry 2 }
cbgpPeerAddrFamilyName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Implementation specific Address Family name."
::= { cbgpPeerAddrFamilyEntry 3 }
--
-- BGP Address Family Peer Prefix table
--
cbgpPeerAddrFamilyPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbgpPeerAddrFamilyPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains prefix related information
related to address families supported by a peer.
Supported address families of a peer are known
during BGP connection establishment. When a new
supported address family is known, this table
is updated with a new entry. When an address
family is not supported any more, corresponding
entry is deleted from the table."
::= { cbgpPeer 4 }
cbgpPeerAddrFamilyPrefixEntry OBJECT-TYPE
SYNTAX CbgpPeerAddrFamilyPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is identified by an AFI/SAFI pair and
peer address. It contains information associated
with route prefixes belonging to an address family."
INDEX {
bgpPeerRemoteAddr,
cbgpPeerAddrFamilyAfi,
cbgpPeerAddrFamilySafi
}
::= { cbgpPeerAddrFamilyPrefixTable 1 }
CbgpPeerAddrFamilyPrefixEntry ::= SEQUENCE {
cbgpPeerAcceptedPrefixes Counter32,
cbgpPeerDeniedPrefixes Gauge32,
cbgpPeerPrefixAdminLimit Unsigned32,
cbgpPeerPrefixThreshold Unsigned32,
cbgpPeerPrefixClearThreshold Unsigned32,
cbgpPeerAdvertisedPrefixes Gauge32,
cbgpPeerSuppressedPrefixes Gauge32,
cbgpPeerWithdrawnPrefixes Gauge32
}
cbgpPeerAcceptedPrefixes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of accepted route prefixes on this connection,
which belong to an address family."
::= { cbgpPeerAddrFamilyPrefixEntry 1 }
cbgpPeerDeniedPrefixes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a route prefix, which
belongs to an address family, received on this
connection is denied. It is initialized to zero when
the connection is undergone a hard reset."
::= { cbgpPeerAddrFamilyPrefixEntry 2 }
cbgpPeerPrefixAdminLimit OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Max number of route prefixes accepted for an address
family on this connection."
::= { cbgpPeerAddrFamilyPrefixEntry 3 }
cbgpPeerPrefixThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Prefix threshold value (%) for an address family
on this connection at which warning message stating
the prefix count is crossed the threshold or
corresponding SNMP notification is generated."
::= { cbgpPeerAddrFamilyPrefixEntry 4 }
cbgpPeerPrefixClearThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Prefix threshold value (%) for an address family
on this connection at which SNMP clear notification
is generated if prefix threshold notification is
already generated."
::= { cbgpPeerAddrFamilyPrefixEntry 5 }
cbgpPeerAdvertisedPrefixes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a route prefix,
which belongs to an address family is advertised
on this connection. It is initialized to zero when
the connection is undergone a hard reset."
::= { cbgpPeerAddrFamilyPrefixEntry 6 }
cbgpPeerSuppressedPrefixes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a route prefix,
which belongs to an address family is suppressed
from being sent on this connection. It is
initialized to zero when the connection is undergone
a hard reset."
::= { cbgpPeerAddrFamilyPrefixEntry 7 }
cbgpPeerWithdrawnPrefixes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a route prefix,
which belongs to an address family, is withdrawn on
this connection. It is initialized to zero when the
connection is undergone a hard reset."
::= { cbgpPeerAddrFamilyPrefixEntry 8 }
-- Notifications
ciscoBgp4NotifyPrefix OBJECT IDENTIFIER ::= { ciscoBgp4MIB 0 }
cbgpFsmStateChange NOTIFICATION-TYPE
OBJECTS { bgpPeerLastError,
bgpPeerState,
cbgpPeerLastErrorTxt,
cbgpPeerPrevState
}
STATUS current
DESCRIPTION
"The BGP cbgpFsmStateChange notification is generated
for every BGP FSM state change. The bgpPeerRemoteAddr
value is attached to the notification object ID."
::= { ciscoBgp4NotifyPrefix 1 }
cbgpBackwardTransition NOTIFICATION-TYPE
OBJECTS { bgpPeerLastError,
bgpPeerState,
cbgpPeerLastErrorTxt,
cbgpPeerPrevState
}
STATUS current
DESCRIPTION
"The cbgpBackwardTransition Event is generated when the
BGP FSM moves from a higher numbered state to a lower
numbered state. The bgpPeerRemoteAddr value is attached
to the notification object ID."
::= { ciscoBgp4NotifyPrefix 2 }
cbgpPrefixThresholdExceeded NOTIFICATION-TYPE
OBJECTS { cbgpPeerPrefixAdminLimit,
cbgpPeerPrefixThreshold
}
STATUS current
DESCRIPTION
"The cbgpPrfefixMaxThresholdExceeded notification is
generated when prefix count exceeds the configured
warning threshold on a session for an address
family. The bgpPeerRemoteAddr, cbgpPeerAddrFamilyAfi
and cbgpPeerAddrFamilySafi values are attached to the
notification object ID."
::= { ciscoBgp4NotifyPrefix 3 }
cbgpPrefixThresholdClear NOTIFICATION-TYPE
OBJECTS { cbgpPeerPrefixAdminLimit,
cbgpPeerPrefixClearThreshold
}
STATUS current
DESCRIPTION
"The cbgpPrefixThresholdClear notification is
generated when prefix count drops below the configured
clear threshold on a session for an address family once
cbgpPrefixThresholdExceeded is generated. This won't
be generated if the peer session goes down after the
generation of cbgpPrefixThresholdExceeded.
The bgpPeerRemoteAddr, cbgpPeerAddrFamilyAfi and
cbgpPeerAddrFamilySafi values are attached to the
notification object ID."
::= { ciscoBgp4NotifyPrefix 4 }
-- ciscoBgp4NotificationPrefix is deprecated.
-- Do not define any objects and/or notifications
-- under this OID.
ciscoBgp4NotificationPrefix
OBJECT IDENTIFIER ::= { ciscoBgp4MIB 2 }
-- conformance information
ciscoBgp4MIBConformance
OBJECT IDENTIFIER ::= { ciscoBgp4MIB 3 }
ciscoBgp4MIBCompliances
OBJECT IDENTIFIER ::= { ciscoBgp4MIBConformance 1 }
ciscoBgp4MIBGroups
OBJECT IDENTIFIER ::= { ciscoBgp4MIBConformance 2 }
-- compliance statements
ciscoBgp4MIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco BGP4 MIB"
MODULE -- this module
MANDATORY-GROUPS { ciscoBgp4RouteGroup }
::= { ciscoBgp4MIBCompliances 1 }
ciscoBgp4MIBComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco BGP4 MIB"
MODULE -- this module
MANDATORY-GROUPS { ciscoBgp4RouteGroup,
ciscoBgp4PeerGroup,
ciscoBgp4NotificationsGroup }
OBJECT cbgpRouteAggregatorAddrType
SYNTAX INTEGER { ipv4(1) }
DESCRIPTION
"An implementation is only required to support
IPv4 address type for aggregator address."
OBJECT cbgpRouteAggregatorAddr
SYNTAX InetAddress (SIZE (4))
DESCRIPTION
"An implementation is only required to support
IPv4 address type for aggregator address."
OBJECT cbgpPeerPrefixLimit
SYNTAX Unsigned32 (1..4294967295)
MIN-ACCESS read-only
DESCRIPTION
"SET operation is not supported on this object"
::= { ciscoBgp4MIBCompliances 2 }
ciscoBgp4MIBComplianceRev2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the Cisco BGP4 MIB"
MODULE -- this module
MANDATORY-GROUPS { ciscoBgp4RouteGroup,
ciscoBgp4PeerGroup1,
ciscoBgp4NotificationsGroup1 }
OBJECT cbgpRouteAggregatorAddrType
SYNTAX INTEGER { ipv4(1) }
DESCRIPTION
"An implementation is only required to support
IPv4 address type."
OBJECT cbgpRouteAggregatorAddr
SYNTAX OCTET STRING (SIZE (0..4))
DESCRIPTION
"An implementation is only required to support
IPv4 address type."
OBJECT cbgpPeerPrefixAdminLimit
MIN-ACCESS read-only
DESCRIPTION
"SET operation is not supported on this object"
OBJECT cbgpPeerPrefixThreshold
MIN-ACCESS read-only
DESCRIPTION
"SET operation is not supported on this object"
::= { ciscoBgp4MIBCompliances 3 }
-- Units of conformance
ciscoBgp4RouteGroup OBJECT-GROUP
OBJECTS { cbgpRouteOrigin,
cbgpRouteASPathSegment,
cbgpRouteNextHop,
cbgpRouteMedPresent,
cbgpRouteMultiExitDisc,
cbgpRouteLocalPrefPresent,
cbgpRouteLocalPref,
cbgpRouteAtomicAggregate,
cbgpRouteAggregatorAS,
cbgpRouteAggregatorAddrType,
cbgpRouteAggregatorAddr,
cbgpRouteBest,
cbgpRouteUnknownAttr
}
STATUS current
DESCRIPTION
"A collection of objects providing information
about routes received by BGP speaker."
::= { ciscoBgp4MIBGroups 1 }
ciscoBgp4PeerGroup OBJECT-GROUP
OBJECTS {
cbgpPeerPrefixAccepted,
cbgpPeerPrefixDenied,
cbgpPeerPrefixLimit,
cbgpPeerPrefixAdvertised,
cbgpPeerPrefixSuppressed,
cbgpPeerPrefixWithdrawn
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing information
about routes received by BGP speaker."
::= { ciscoBgp4MIBGroups 2 }
ciscoBgp4NotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS { cbgpFsmStateChange }
STATUS deprecated
DESCRIPTION
"The collection of notifications related to BGP."
::= { ciscoBgp4MIBGroups 3 }
ciscoBgp4PeerGroup1 OBJECT-GROUP
OBJECTS {
cbgpPeerPrevState,
cbgpPeerLastErrorTxt,
cbgpPeerCapValue,
cbgpPeerAddrFamilyName,
cbgpPeerAcceptedPrefixes,
cbgpPeerDeniedPrefixes,
cbgpPeerPrefixAdminLimit,
cbgpPeerPrefixThreshold,
cbgpPeerPrefixClearThreshold,
cbgpPeerAdvertisedPrefixes,
cbgpPeerSuppressedPrefixes,
cbgpPeerWithdrawnPrefixes
}
STATUS current
DESCRIPTION
"A collection of objects providing information
about a BGP peer."
::= { ciscoBgp4MIBGroups 4 }
ciscoBgp4NotificationsGroup1 NOTIFICATION-GROUP
NOTIFICATIONS {
cbgpFsmStateChange,
cbgpBackwardTransition,
cbgpPrefixThresholdExceeded,
cbgpPrefixThresholdClear
}
STATUS current
DESCRIPTION
"The collection of notifications related to BGP."
::= { ciscoBgp4MIBGroups 5 }
END
Reference in New Issue View Git Blame Copy Permalink