mirror of
https://github.com/librenms/librenms.git
synced 2024-09-30 06:46:43 +00:00
3385 lines
94 KiB
Plaintext
3385 lines
94 KiB
Plaintext
|
|
--
|
|
-- whisp-sm-mib.mib
|
|
-- GENERATED FROM ui_db.xml
|
|
--
|
|
-- *****************************************************************************************
|
|
-- Copyright 2005-2013 (c), Cambium Networks
|
|
-- Cambium Networks Confidential Proprietary
|
|
-- *****************************************************************************************
|
|
--
|
|
-- Canopy SM and Backhaul Timing Slave MIB definitions.
|
|
--
|
|
-- *****************************************************************************************
|
|
|
|
WHISP-SM-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Gauge32, TimeTicks, IpAddress, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
DisplayString, PhysAddress, MacAddress
|
|
FROM SNMPv2-TC
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
WhispLUID, WhispMACAddress
|
|
FROM WHISP-TCV2-MIB
|
|
whispModules, whispBox, whispAps, whispSm
|
|
FROM WHISP-GLOBAL-REG-MIB
|
|
dhcpRfPublicIp, whispBoxEsn
|
|
FROM WHISP-BOX-MIBV2-MIB
|
|
;
|
|
|
|
whispSmMibModule MODULE-IDENTITY
|
|
LAST-UPDATED "200304150000Z"
|
|
ORGANIZATION "Cambium Networks"
|
|
CONTACT-INFO
|
|
"Canopy Technical Support
|
|
email: technical-support@canopywireless.com"
|
|
DESCRIPTION
|
|
"This module contains MIB definitions for Subscriber Modem."
|
|
::= {whispModules 13}
|
|
|
|
-- -------------------------------------------------------------------------
|
|
-- Top Level Registrations
|
|
|
|
whispSmConfig OBJECT IDENTIFIER ::= {whispSm 1}
|
|
whispSmSecurity OBJECT IDENTIFIER ::= {whispSm 7}
|
|
whispSmStatus OBJECT IDENTIFIER ::= {whispSm 2}
|
|
whispSmGroups OBJECT IDENTIFIER ::= {whispSm 3}
|
|
whispSmEvent OBJECT IDENTIFIER ::= {whispSm 4}
|
|
whispSmDfsEvent OBJECT IDENTIFIER ::= {whispSmEvent 1}
|
|
whispSmSpAnEvent OBJECT IDENTIFIER ::= {whispSmEvent 2}
|
|
whispSmDHCPClientEvent OBJECT IDENTIFIER ::= {whispSmEvent 3}
|
|
whispSmControls OBJECT IDENTIFIER ::= {whispSm 8}
|
|
|
|
-- -------------------------------------------------------------------------
|
|
|
|
|
|
-- Subscriber Modem and Backhaul timing slave configuration
|
|
|
|
rfScanList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RF scan list.
|
|
The frequencies are:
|
|
2.4 radios:24150,24175,24200,24225,24250,24275,24300,24325,24350,24375,
|
|
24400,24425,24450,24475,24500,24525,24550,24575.
|
|
3.5 radios:340000-360000 added and removed dynamically.
|
|
4.9 radios:494500-498500 added and removed dynamically.
|
|
5.1 radios:5175,5180,5185,5190,5195,5200,5205,5210,5215,5220,5225,5230,5240,
|
|
5245,5250,5255,5260,5265,5270,5275,5280,5285,5290,5295,5300,5305,
|
|
5310,5315,5320,5325.
|
|
5.2 radios:5275,5280,5285,5290,5295,5300,5305,5310,5315,5320,5325.
|
|
5.4 FSK radios:5495,5500,5505,5510,5515,5520,5525,
|
|
5530,5535,5540,5545,5550,5555,5560,5565,5570,5575,5580,5585,5590,5595,
|
|
5600,5605,5610,5615,5620,5625,5630,5635,5640,5645,5650,5655,5660,5665,
|
|
5670,5675,5680,5685,5690,5695,5700,5705.
|
|
5.4 OFDM radios 5 mhz channels: 547250,547500,547750,548000,548500,548750,549000,549250,549500,549750,550000,550250,550500,550750,551000,551250,551500,551750,552000,552250,552500,552750,
|
|
553000,553250,553500,553750,554000,554250,554500,554750,555000,555250,555500,555750,556000,556250,556500,556750,557000,557250,557500,557750,558000,558250,558500,558750,559000,559250,559500,559750,
|
|
560000,560250,560500,560750,561000,561250,561500,561750,562000,562250,562500,562750,563000,563250,563500,563750,564000,564250,564500,564750,565000,565250,565500,565750,566000,566250,566500,566750,
|
|
567000,567250,567500,567750,568000,568250,568500,568750,569000,569250,569500,569750,570000,570250,570500,570750,571000,571250,571500,571750.
|
|
5.4 OFDM radios 10 mhz channels: 547500,548500,549000,549500,550000,550500,551000,551500,552000,552500,
|
|
553000,553500,554000,554500,555000,555500,556000,556500,557000,557500,558000,558500,559000,559500,
|
|
560000,560500,561000,561500,562000,562500,563000,563500,564000,564500,565000,565500,566000,566500,
|
|
567000,567500,568000,568500,569000,569500,570000,570500,571000,571500.
|
|
5.4 OFDM radios 20 mhz channels: 547500,548500,549000,549500,550000,550500,551000,551500,552000,552500,
|
|
553000,553500,554000,554500,555000,555500,556000,556500,557000,557500,558000,558500,559000,559500,
|
|
560000,560500,561000,561500,562000,562500,563000,563500,564000,564500,565000,565500,566000,566500,
|
|
567000,567500,568000,568500,569000,569500,570000,570500,571000,571500.
|
|
5.7 FSK radios with ISM enabled :5735,5740,5745,5750,5755,5760,5765,5770,5775,
|
|
5780,5785,5790,5795,5800,5805,5810,5815,5820,5825,5830,5835,5840.
|
|
5.7 OFDM radios 5 mhz channels :572750,573000,573250,573500,573750,574000,574250,574500,574750,575000,575250,575500,575750,576000,576250,576500,576750,577000,577250,577500,577750,
|
|
578000,578250,578500,578750,579000,579250,579500,579750,580000,580250,580500,580750,581000,581250,581500,581750,582000,582250,582500,582750,583000,583250,583500,583750,584000,
|
|
584250,584500,584750,585000,585250,585500,585750,586000,586250,586500,586750,587000,587250.
|
|
5.7 OFDM radios 10 mhz channels:573000,573500,574000,574500,575000,575500,576000,576500,577000,577500,
|
|
578000,578500,579000,579500,580000,580500,581000,581500,582000,582500,583000,583500,584000,584500,585000,585500,586000,586500,587000.
|
|
5.7 OFDM radios 20 mhz channels :573500,574000,574500,575000,575500,576000,576500,577000,577500,
|
|
578000,578500,579000,579500,580000,580500,581000,581500,582000,582500,583000,583500,584000,584500,585000,585500,586000,586500.
|
|
5.8 radios:5860,5865,5870,5875,5880,5885,5890,5895,5900,5905,5910.
|
|
5805,5810,5815,5820,5825,5830,5835,5840,5845,5850,5855,5860,5865,5870,5875,5880,
|
|
5885,5890,5895,5900,5905,5910,5915,5920,5925,5930,5935,5940,5945,5950.
|
|
5.9 radios:5735,5740,5745,5750,5755,5760,5765,5770,5775,5780,5785,5790,5795,5800,
|
|
5805,5810,5815,5820,5825,5830,5835,5840,5845,5850,5855,5860,5865,5870,5875,5880,
|
|
5885,5890,5895,5900,5905,5910,5915,5920,5925,5930,5935,5940,5945,5950.
|
|
6.050 radios:5850,5855,5860,5865,5870,5875,5880,5885,5890,5895,5900,5905,5910,5915,5920,
|
|
5925,5930,5935,5940,5945,5950,5955,5960,5965,5970,5975,5980,5985,5990,5995,6000,
|
|
6005,6010,6015,6020,6025,6030,6035,6040,6045,6050.
|
|
900 radios:9060,9070,9080,9090,9100,9110,9120,9130,9140,9150,9160,9170,9180,9190,9200,9220,9230,9240.
|
|
0: none.
|
|
all: All frequencies in the band(s) supported by the radio will be selected.
|
|
all54: All frequencies in the 5.4 band will be selected (only available on dual band radios).
|
|
all57: All frequencies in the 5.7 band will be selected (only available on dual band radios).
|
|
When doing a set, separate values with comma with no white space between values."
|
|
::={whispSmConfig 1}
|
|
|
|
powerUpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
operational(0),
|
|
aim(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SM Power Up Mode With No 802.3 Link.
|
|
1 -- Power up in Aim mode
|
|
2 -- Power up in Operational mode."
|
|
::={whispSmConfig 2}
|
|
|
|
lanIpSm OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LAN IP."
|
|
::={whispSmConfig 3}
|
|
|
|
lanMaskSm OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LAN subnet mask."
|
|
::={whispSmConfig 4}
|
|
|
|
defaultGwSm OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default gateway."
|
|
::={whispSmConfig 5}
|
|
|
|
networkAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
localIP(0),
|
|
publicIP(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network accessibility. Public or local IP.
|
|
For multipoint only."
|
|
::={whispSmConfig 6}
|
|
|
|
authKeySm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication key. It should be equal or less than 32
|
|
characters long."
|
|
::={whispSmConfig 7}
|
|
|
|
enable8023link OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable 802.3 link. For SMs only."
|
|
::={whispSmConfig 8}
|
|
|
|
authKeyOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
useDefault(0),
|
|
useKeySet(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This option is for SMs only. Backhaul timing slave always
|
|
uses the set key.
|
|
0 - Use default key.
|
|
1 - Use set key."
|
|
::={whispSmConfig 9}
|
|
|
|
timingPulseGated OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0 - Disable (Always propagate the frame timing pulse).
|
|
1 - Enable (If SM out of sync then dont propagate the frame timing pulse)."
|
|
::={whispSmConfig 10}
|
|
|
|
-- NAPT configuration
|
|
|
|
naptPrivateIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAPT private IP address. Only the first three bytes can be
|
|
changed when NAPT is enabled."
|
|
::={whispSmConfig 11}
|
|
|
|
naptPrivateSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAPT private subnet mask. Only the last byte can be
|
|
changed when NAPT is enabled. The address will always be:
|
|
255.255.255.x."
|
|
::={whispSmConfig 12}
|
|
|
|
naptPublicIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of NAPT Public Interface. The variable is available
|
|
only when NAPT is enabled."
|
|
::={whispSmConfig 13}
|
|
|
|
naptPublicSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Subnet mask for NAPT Public Interface. The variable is available
|
|
only when NAPT is enabled."
|
|
::={whispSmConfig 14}
|
|
|
|
naptPublicGatewayIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of NAPT Public Interface Gateway. The variable is available
|
|
only when NAPT is enabled."
|
|
::={whispSmConfig 15}
|
|
|
|
naptRFPublicIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of RF Public Interface. The variable is available
|
|
only when NAPT is enabled."
|
|
::={whispSmConfig 16}
|
|
|
|
naptRFPublicSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Subnet mask of RF Public Interface. The variable is available
|
|
only when NAPT is enabled."
|
|
::={whispSmConfig 17}
|
|
|
|
naptRFPublicGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of RF Public Interface Gateway. The variable is
|
|
available only when NAPT is enabled."
|
|
::={whispSmConfig 18}
|
|
|
|
naptEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable NAPT. For multipoint only.
|
|
1=Enable NAPT, 0=Disable NAPT."
|
|
::={whispSmConfig 19}
|
|
|
|
arpCacheTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ARP cache time out in unit of minutes. For multipoint only.
|
|
Range from 1-30."
|
|
::={whispSmConfig 20}
|
|
|
|
tcpGarbageCollectTmout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Units of minutes for TCP garbage collection. For multipoint only.
|
|
Range 4-1440."
|
|
::={whispSmConfig 21}
|
|
|
|
udpGarbageCollectTmout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Units of minutes for UDP garbage collection. For multipoint only.
|
|
Range 1-1440."
|
|
::={whispSmConfig 22}
|
|
|
|
-- DHCP configuration
|
|
|
|
dhcpClientEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To enable or disable DHCP client. For multipoint SM's
|
|
with NAPT enabled."
|
|
::={whispSmConfig 23}
|
|
|
|
dhcpServerEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable DHCP server. For multipoint SM's
|
|
with NAPT enabled."
|
|
::={whispSmConfig 24}
|
|
|
|
dhcpServerLeaseTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Units of days for DHCP server lease time. For multipoint
|
|
SM's with NAPT enabled. Range from 1-30."
|
|
::={whispSmConfig 25}
|
|
|
|
dhcpIPStart OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last byte will be set for the starting IP that
|
|
our DHCP server gives away. The first 3 bytes of the
|
|
starting IP are the same as those of NAPT private IP"
|
|
::={whispSmConfig 26}
|
|
|
|
dnsAutomatic OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
manually(0),
|
|
automatically(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To have DHCP Server obtain DNS information automatically or manually."
|
|
::={whispSmConfig 27}
|
|
|
|
prefferedDNSIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preferred DNS IP when we are configured for static DNS
|
|
(Not used when configured for automatic DNS)."
|
|
::={whispSmConfig 28}
|
|
|
|
alternateDNSIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The alternate DNS IP when we are configured for static DNS
|
|
(Not used when configured for automatic DNS)."
|
|
::={whispSmConfig 29}
|
|
|
|
dmzIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Only the last byte of DMZ Host IP will be set.
|
|
The first 3 bytes of DMZ IP are the same as those of
|
|
NAPT private IP."
|
|
::={whispSmConfig 30}
|
|
|
|
dmzEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable DMZ host functionality."
|
|
::={whispSmConfig 31}
|
|
|
|
dhcpNumIPsToLease OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of IP addresses that our DHCP server can give away."
|
|
::={whispSmConfig 32}
|
|
|
|
pppoeFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set PPPoE packet filter when NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 33}
|
|
|
|
smbFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set SMB packet filter when NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 34}
|
|
|
|
snmpFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set SNMP packet filter when NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 35}
|
|
|
|
userP1Filter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 1 packet filter when
|
|
NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 36}
|
|
|
|
userP2Filter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 2 packet filter when
|
|
NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 37}
|
|
|
|
userP3Filter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 3 packet filter when
|
|
NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 38}
|
|
|
|
allOtherIpFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set all other IPv4 packet filter when NAT
|
|
is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 39}
|
|
|
|
upLinkBCastFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This variable is currently obsolete."
|
|
::={whispSmConfig 40}
|
|
|
|
arpFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set ARP packet filter when NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 41}
|
|
|
|
allOthersFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set all other packet filter when NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 42}
|
|
|
|
-- User Defined Port Filtering Configuration
|
|
|
|
userDefinedPort1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"An integer value of number one user defined port. Range:0-65535
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 43}
|
|
|
|
port1TCPFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 1 TCP traffic filter.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 44}
|
|
|
|
port1UDPFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 1 UDP traffic filter.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 45}
|
|
|
|
userDefinedPort2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"An integer value of number two user defined port. Range:0-65535
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 46}
|
|
|
|
port2TCPFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 2 TCP traffic filter.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 47}
|
|
|
|
port2UDPFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 2 UDP traffic filter.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 48}
|
|
|
|
userDefinedPort3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"An integer value of number three user defined port. Range:0-65535
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 49}
|
|
|
|
port3TCPFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 3 TCP traffic filter.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 50}
|
|
|
|
port3UDPFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 3 UDP traffic filter.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 51}
|
|
|
|
bootpcFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set bootp client sourced packets filter when
|
|
NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 52}
|
|
|
|
bootpsFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set bootp server sourced packets filter when
|
|
NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 53}
|
|
|
|
ip4MultFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set IPv4 MultiCast packets filter when
|
|
NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 54}
|
|
|
|
ingressVID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Untagged ingress VID."
|
|
::={whispSmConfig 55}
|
|
|
|
-- CIR configuration
|
|
|
|
lowPriorityUplinkCIR OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low priority uplink CIR."
|
|
::={whispSmConfig 56}
|
|
|
|
lowPriorityDownlinkCIR OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low priority downlink CIR."
|
|
::={whispSmConfig 57}
|
|
|
|
hiPriorityChannel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable high priority channel."
|
|
::={whispSmConfig 58}
|
|
|
|
hiPriorityUplinkCIR OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High priority uplink CIR."
|
|
::={whispSmConfig 59}
|
|
|
|
hiPriorityDownlinkCIR OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High priority downlink CIR."
|
|
::={whispSmConfig 60}
|
|
|
|
smRateAdapt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
onex(0),
|
|
onextwox(1),
|
|
onextwoxthreex(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Rate adaptation parameter. 0: no rate adaptation. 1: 1x and 2x adaptation. 2: 1x,2x and 3x adaptation."
|
|
::={whispSmConfig 61}
|
|
|
|
upLnkDataRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sustained uplink bandwidth cap."
|
|
::={whispSmConfig 62}
|
|
|
|
upLnkLimit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Burst uplink bandwidth cap."
|
|
::={whispSmConfig 63}
|
|
|
|
dwnLnkDataRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sustained downlink bandwidth cap."
|
|
::={whispSmConfig 64}
|
|
|
|
dwnLnkLimit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Burst downlink bandwidth cap."
|
|
::={whispSmConfig 65}
|
|
|
|
dfsConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios."
|
|
::={whispSmConfig 66}
|
|
|
|
ethAccessFilterEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To enable or disable Ethernet Port access filtering to SM Management Functions.
|
|
(0) - Ethernet access to SM Management allowed.
|
|
(1) - Ethernet access to SM Management blocked."
|
|
::={whispSmConfig 67}
|
|
|
|
ipAccessFilterEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable IP access filtering to Management functions.
|
|
(0) - IP access will be allowed from all addresses.
|
|
(1) - IP access will be controlled using allowedIPAccess1-3 entries."
|
|
::={whispSmConfig 68}
|
|
|
|
allowedIPAccess1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allow access to SM Management from this IP.
|
|
0 is default setting to allow from all IPs."
|
|
::={whispSmConfig 69}
|
|
|
|
allowedIPAccess2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allow access to SM Management from this IP.
|
|
0 is default setting to allow from all IPs."
|
|
::={whispSmConfig 70}
|
|
|
|
allowedIPAccess3 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allow access to SM Management from this IP.
|
|
0 is default setting to allow from all IPs."
|
|
::={whispSmConfig 71}
|
|
|
|
rfDhcpState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable RF Interface DHCP feature."
|
|
::={whispSmConfig 72}
|
|
|
|
-- Broadcast MIR Feature.
|
|
|
|
bCastMIR OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable and set Broadcast/ Multicast MIR feature. Use value of 0 to disable. Units are in kbps"
|
|
::={whispSmConfig 73}
|
|
|
|
bhsReReg OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not. 24 Hour Encryption Refresh."
|
|
::={whispSmConfig 74}
|
|
|
|
smLEDModeFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
legacy(0),
|
|
revised(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To set LED Panel Operation to Revised Mode(1) or to Legacy Mode(0)"
|
|
::={whispSmConfig 75}
|
|
|
|
ethAccessEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable Ethernet Port access to SM Management Functions.
|
|
(1) - Ethernet access to SM Management allowed.
|
|
(0) - Ethernet access to SM Management blocked."
|
|
::={whispSmConfig 76}
|
|
|
|
pppoeEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable PPPoE on the SM. NAT MUST be enabled prior and Translation Bridging MUST be DISABLED on the AP."
|
|
::={whispSmConfig 77}
|
|
|
|
pppoeAuthenticationType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
chap-pap(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the PPPoE Authentication Type to either None or CHAP/pap"
|
|
::={whispSmConfig 78}
|
|
|
|
pppoeAccessConcentrator OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the PPPoE Access Concentrator Name. Less than or equal to 32 characters"
|
|
::={whispSmConfig 79}
|
|
|
|
pppoeServiceName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the PPPoE Service Name. Less than or equal to 32 characters"
|
|
::={whispSmConfig 80}
|
|
|
|
pppoeUserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the PPPoE Username. Less than or equal to 32 characters"
|
|
::={whispSmConfig 81}
|
|
|
|
pppoePassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the PPPoE Password. Less than or equal to 32 characters"
|
|
::={whispSmConfig 82}
|
|
|
|
pppoeTCPMSSClampEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable TCP MSS Clamping. Enabling this will cause the SM to edit the TCP MSS in TCP SYN and SYN-ACK packets.
|
|
This will allow for a workaround for MTU issues so that the TCP session will only go up to the clamped MSS. If you are
|
|
using PMTUD reliably, this should not be needed."
|
|
::={whispSmConfig 83}
|
|
|
|
pppoeMTUOverrideEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the overriding of the PPP link's MTU. Normally, the PPP link will set the MTU to the MRU of the
|
|
PPPoE Server, but this may be overridden. If the MRU of the PPPoE server is smaller than the desired MTU,
|
|
the smaller MTU will be used."
|
|
::={whispSmConfig 84}
|
|
|
|
pppoeMTUOverrideValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1492)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the overriding of the PPP link's MTU. Normally, the PPP link will set the MTU to the MRU of the
|
|
PPPoE Server, but this may be overridden. If the MRU of the PPPoE server is smaller than the desired MTU,
|
|
the smaller MTU will be used. Max MTU of a PPPoE link is 1492."
|
|
::={whispSmConfig 85}
|
|
|
|
pppoeTimerType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
keepAlive(1),
|
|
idleTimeout(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the PPPoE Timer type. Can be a Keep Alive timer where the link will be checked periodically and
|
|
automatically redialed if the link is down. Also could be an Idle Timeout where the link will
|
|
be automatically dropped after an idle period and redialed if user data is present. Keep Alive timers
|
|
are in seconds while Idle Timeout timers are in minutes."
|
|
::={whispSmConfig 86}
|
|
|
|
pppoeTimeoutPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Timeout Period. The use of this depends on the Timer Type. If the Timer Type is KeepAlive, then
|
|
the timeout period is in seconds. If the Timer Type is Idle Timeout, then the timeout period is in minutes.
|
|
Minimum values are 20 seconds for KeepAlive timer, and 5 minutes for Idle Timeout."
|
|
::={whispSmConfig 87}
|
|
|
|
timedSpectrumAnalysisDuration OBJECT-TYPE
|
|
SYNTAX INTEGER (10..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"As of release 13.0.2 this value is depricated. Please use the OID in whispBoxConfig.
|
|
Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds."
|
|
::={whispSmConfig 88}
|
|
|
|
spectrumAnalysisOnBoot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable Spectrum Analysis on boot up for one scan through the band.
|
|
(0) - Disabled
|
|
(1) - Enabled"
|
|
::={whispSmConfig 89}
|
|
|
|
spectrumAnalysisAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stopSpectrumAnalysis(0),
|
|
startTimedSpectrumAnalysis(1),
|
|
startContinuousSpectrumAnalysis(2),
|
|
idleNoSpectrumAnalysis(3),
|
|
idleCompleteSpectrumAnalysis(4),
|
|
inProgressTimedSpectrumAnalysis(5),
|
|
inProgressContinuousSpectrumAnalysis(6)}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"As of release 13.0.2, this OID has been deprecated. Please use the OID in whispBoxConfig.
|
|
Start or stop timed or continuous Spectrum Analysis and also give status.
|
|
(0) - Stop Spectrum Analysis
|
|
(1) - Start Timed Spectrum Analysis
|
|
(2) - Start Continuous Spectrum Analysis
|
|
(3) - Idle, no Spectrum Analysis results.
|
|
(4) - Idle, Spectrum Analysis results available.
|
|
(5) - Timed or Remote Spectrum Analysis in progress.
|
|
(6) - Continuous Spectrum Analysis in progress.
|
|
|
|
Note: Continuous mode has a max of 24 hours."
|
|
::={whispSmConfig 90}
|
|
|
|
pppoeConnectOD OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
connectOnDemand(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Force a manual PPPoE connection attempt."
|
|
::={whispSmConfig 91}
|
|
|
|
pppoeDisconnectOD OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disconnectOnDemand(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Force a manual PPPoE disconnection."
|
|
::={whispSmConfig 92}
|
|
|
|
smAntennaType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
integrated(0),
|
|
external(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Deprecated. See whispBoxStatus.antType for antenna type information."
|
|
::={whispSmConfig 93}
|
|
|
|
-- SM NAT Connection Type
|
|
|
|
natConnectionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
staticIP(0),
|
|
dhcp(1),
|
|
pppoe(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure the SM NAT connection type. Options are Static IP, DHCP, or PPPoE."
|
|
::={whispSmConfig 94}
|
|
|
|
-- SM WAN (NAT and/or PPPoE) Ping Reply Enable
|
|
|
|
wanPingReplyEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allow Ping replies from SM WAN interface. Applies to both NAT and PPPoE WAN interfaces."
|
|
::={whispSmConfig 95}
|
|
|
|
packetFilterDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
upstream(1),
|
|
downstream(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To packet filter direction when NAT is disabled. Upstream is default.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 96}
|
|
|
|
colorCode2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Second Color code."
|
|
::={whispSmConfig 97}
|
|
|
|
colorCodepriority2 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority setting for second color code."
|
|
::={whispSmConfig 98}
|
|
|
|
colorCode3 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Third Color code."
|
|
::={whispSmConfig 99}
|
|
|
|
colorCodepriority3 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority setting for the third color code."
|
|
::={whispSmConfig 100}
|
|
|
|
colorCode4 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fourth Color code."
|
|
::={whispSmConfig 101}
|
|
|
|
colorCodepriority4 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority setting for the fourth color code."
|
|
::={whispSmConfig 102}
|
|
|
|
colorCode5 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fifth Color code."
|
|
::={whispSmConfig 103}
|
|
|
|
colorCodepriority5 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority setting for the fifth color code."
|
|
::={whispSmConfig 104}
|
|
|
|
colorCode6 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sixth Color code."
|
|
::={whispSmConfig 105}
|
|
|
|
colorCodepriority6 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority setting for the sixth color code."
|
|
::={whispSmConfig 106}
|
|
|
|
colorCode7 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Seventh Color code."
|
|
::={whispSmConfig 107}
|
|
|
|
colorCodepriority7 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority setting for the seventh color code."
|
|
::={whispSmConfig 108}
|
|
|
|
colorCode8 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Eighth Color code."
|
|
::={whispSmConfig 109}
|
|
|
|
colorCodepriority8 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority setting for the eighth color code."
|
|
::={whispSmConfig 110}
|
|
|
|
colorCode9 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ninth Color code."
|
|
::={whispSmConfig 111}
|
|
|
|
colorCodepriority9 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority setting for the ninth color code."
|
|
::={whispSmConfig 112}
|
|
|
|
colorCode10 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tenth Color code."
|
|
::={whispSmConfig 113}
|
|
|
|
colorCodepriority10 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority setting for the tenth color code."
|
|
::={whispSmConfig 114}
|
|
|
|
natDNSProxyEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If enabled, the SM will advertise itself as the DNS server when it sends out DHCP client leases and forward DNS queries automatically.
|
|
If disabled, the SM will forward on upstream DNS server information when it sends out DHCP client leases."
|
|
::={whispSmConfig 115}
|
|
|
|
allIpv4Filter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set all IPv4 packet filter when NAT
|
|
is disabled. Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp,
|
|
IPv4 Mcast, User Defined Ports, and All Other IPv4).
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 116}
|
|
|
|
spectrumAnalysisDisplay OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
averaging(0),
|
|
instantaneous(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The display for Spectrum Analyzer:
|
|
(0) - Averaging over entire period
|
|
(1) - Instantaneous showing the last reading"
|
|
::={whispSmConfig 117}
|
|
|
|
syslogSMXmitSetting OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
obtain-from-AP(0),
|
|
enable(1),
|
|
disable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Obtains Syslog transmit configuration from AP/BHM if set to 0, overrides if 1 or 2. Transmits syslog data to Syslog server if enabled(1), stops if disabled (2)."
|
|
::={whispSmConfig 118}
|
|
|
|
syslogServerApPreferred OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
use-local(0),
|
|
use-AP-preferred(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uses Syslog server configuration from AP/BHM if enabled and available,
|
|
otherwise uses local configuration."
|
|
::={whispSmConfig 119}
|
|
|
|
syslogMinLevelApPreferred OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
use-local(0),
|
|
use-AP-preferred(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uses Syslog minimum transmit level configuration from AP/BHM if available,
|
|
otherwise uses local configuration."
|
|
::={whispSmConfig 120}
|
|
|
|
syslogSMXmitControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
obtain-from-AP-default-disabled(0),
|
|
obtain-from-AP-default-enabled(1),
|
|
disable(2),
|
|
enable(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Obtains Syslog transmit configuration from AP/BHM if available, or specifies the local transmit state."
|
|
::={whispSmConfig 121}
|
|
|
|
eapPeerAAAServerCommonName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"THIS OID IS CURRENTLY UNUSED: EAP Peer Server Common Name"
|
|
::={whispSmConfig 126}
|
|
|
|
rfScanListBandFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
band5400(8),
|
|
band5700(9)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This element is obsolete."
|
|
::={whispSmConfig 127}
|
|
|
|
upLnkMaxBurstDataRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "Kilobits/sec"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum burst uplink rate."
|
|
::={whispSmConfig 128}
|
|
|
|
dwnLnkMaxBurstDataRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "Kilobits/sec"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum burst downlink rate."
|
|
::={whispSmConfig 129}
|
|
|
|
cyclicPrefixScan OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Cyclic Prefix value for frequency scanning used by MIMO SMs only.
|
|
When setting use a comma delimited list of cyclic prefixes with no spaces. For example: 1/8,1/16"
|
|
::={whispSmConfig 130}
|
|
|
|
bandwidthScan OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bandwidth values for frequency scanning used by MIMO SMs only.
|
|
When setting use a comma delimited list of bandwidths.
|
|
For example: 10, 20"
|
|
::={whispSmConfig 131}
|
|
|
|
apSelection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
powerLevel(1),
|
|
optimizeForThroughput(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This OID affects what AP to attempt to register to when Canopy SMs scan see more than one AP that are valid in it's configuration.
|
|
(0) - Default, Canopy radios after scanning select the best AP that will optimize for estimated throughput.
|
|
(1) - Select the AP with the best receive power level.
|
|
Note this is only if multiple APs fit the current scan configuration, and will be overriden by color codes, RADIUS, etc."
|
|
::={whispSmConfig 132}
|
|
|
|
radioBandscanConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
instant(0),
|
|
delayed(1),
|
|
apply(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to determine when frequency, cyclic prefix and bandwidth settings take effect for
|
|
band scanning MIMO SMs.
|
|
0 - Instant
|
|
1 - Delayed
|
|
2 - Apply changes"
|
|
::={whispSmConfig 133}
|
|
|
|
forcepoweradjust OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will force a multipoint SM to initiate an asynchronous power adjust sequence."
|
|
::={whispSmConfig 134}
|
|
|
|
clearBerrResults OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will clear the BERR results."
|
|
::={whispSmConfig 135}
|
|
|
|
berrautoupdateflag OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates if the once a second BERR updating of counters is enabled. 1 = enabled 0 = disabled"
|
|
::={whispSmConfig 136}
|
|
|
|
testSMBER OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0 - Disable (Return the SM to a normal operation state).
|
|
1 - Enable (Set SM into a BERR test state)."
|
|
::={whispSmConfig 137}
|
|
|
|
allowedIPAccessNMLength1 OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
|
|
::={whispSmConfig 138}
|
|
|
|
allowedIPAccessNMLength2 OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
|
|
::={whispSmConfig 139}
|
|
|
|
allowedIPAccessNMLength3 OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
|
|
::={whispSmConfig 140}
|
|
|
|
naptRemoteManage OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable-standalone(1),
|
|
enable-wan(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable Remote Management. For multipoint only.
|
|
0=Disable Remote Management,
|
|
1=Enable - Standalone Config,
|
|
2=Enable - Use WAN Interface."
|
|
::={whispSmConfig 141}
|
|
|
|
spectrumAnalysisScanBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bandwidth5MHz(0),
|
|
bandwidth10MHz(1),
|
|
bandwidth20MHz(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Scanning Bandwidth used for the Spectrum Analyzer. Only available on PMP 450."
|
|
::={whispSmConfig 142}
|
|
|
|
berDeModSelect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
qpsk(0),
|
|
qam-16(1),
|
|
qam-64(2),
|
|
qam-256(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BER demodulation level the SM is set. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM."
|
|
::={whispSmConfig 143}
|
|
|
|
multicastVCRcvRate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast VC Receive Rate"
|
|
::={whispSmConfig 144}
|
|
|
|
pmp430ApRegistrationOptions OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pmp430(1),
|
|
pmp450(2),
|
|
both(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Selects AP types (430 and/or 450) that are available for the PMP430 SM. When both AP types are selected, if the SM does not register to an AP, it will reboot to scan the other AP type."
|
|
::={whispSmConfig 145}
|
|
|
|
switchRadioModeAndReboot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
finishedReboot(0),
|
|
switchRadioModeAndReboot(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this to 1 will force switch the SM to the other radio mode and immediately reboot the unit.
|
|
When the unit finishes rebooting, it will be in finishedReboot state.
|
|
Only will be allowed to be set if both registration options are configured.
|
|
PMP 430 SM only.
|
|
Introduced in release 12.2."
|
|
::={whispSmConfig 146}
|
|
|
|
numAuthCerts OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"can have a max value of 2"
|
|
::={whispSmSecurity 2}
|
|
|
|
authenticationEnforce OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
aaa(1),
|
|
presharedkey(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"enforce SM to register with specifed Auth Enabled AP"
|
|
::={whispSmSecurity 3}
|
|
|
|
phase1 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eapttls(0),
|
|
eapMSChapV2(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the outer method for EAP Authentication"
|
|
::={whispSmSecurity 4}
|
|
|
|
phase2 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pap(0),
|
|
chap(1),
|
|
mschapv2(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the outer method for EAP Authentication"
|
|
::={whispSmSecurity 5}
|
|
|
|
authOuterId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..253))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EAP Peer Username"
|
|
::={whispSmSecurity 6}
|
|
|
|
authPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EAP Peer password"
|
|
::={whispSmSecurity 7}
|
|
|
|
authUsername OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EAP Peer Identity"
|
|
::={whispSmSecurity 8}
|
|
|
|
useRealm OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the use of realm option."
|
|
::={whispSmSecurity 9}
|
|
|
|
realm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EAP Peer Realm"
|
|
::={whispSmSecurity 10}
|
|
|
|
certTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CertEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of CA Certificates on SM."
|
|
::= {whispSmSecurity 1}
|
|
|
|
certEntry OBJECT-TYPE
|
|
SYNTAX CertEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of Certifcates."
|
|
INDEX {certIndex}
|
|
::= {certTable 1}
|
|
|
|
CertEntry ::= SEQUENCE{
|
|
certIndex INTEGER,
|
|
cert INTEGER,
|
|
action INTEGER,
|
|
certificateDN DisplayString
|
|
}
|
|
|
|
certIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User information table index."
|
|
::={certEntry 1}
|
|
|
|
cert OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(0),
|
|
active(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: Inactive 1: Active"
|
|
::={certEntry 2}
|
|
|
|
action OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noop(0),
|
|
delete(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: No Operation 1: Delete Certificate"
|
|
::={certEntry 3}
|
|
|
|
certificateDN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Distinguished Name of Certificate 2"
|
|
::={certEntry 4}
|
|
|
|
-- Subscriber Modem status page
|
|
|
|
sessionStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SM registered or not."
|
|
::={whispSmStatus 1}
|
|
|
|
rssi OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio signal strength index. FSK only."
|
|
::={whispSmStatus 2}
|
|
|
|
jitter OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A measure of multipath interference. Applicable to FSK radios only."
|
|
::={whispSmStatus 3}
|
|
|
|
airDelay OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Round trip delay in bits."
|
|
::={whispSmStatus 4}
|
|
|
|
radioSlicingSm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This variable is deprecated."
|
|
::={whispSmStatus 5}
|
|
|
|
radioTxGainSm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio transmission gain setting. Applicable to FSK radios only."
|
|
::={whispSmStatus 6}
|
|
|
|
calibrationStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Varible deprecated. Please use calibrationStatusBox."
|
|
::={whispSmStatus 7}
|
|
|
|
radioDbm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx Power level.
|
|
For MIMO this is the combined power of the horizontal and vertical paths."
|
|
::={whispSmStatus 8}
|
|
|
|
registeredToAp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AP MAC address that the SM registered to."
|
|
::={whispSmStatus 9}
|
|
|
|
-- DHCP client status:
|
|
|
|
dhcpCip OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Assigned IP address to DHCP client."
|
|
::={whispSmStatus 10}
|
|
|
|
dhcpSip OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Public DHCP server IP."
|
|
::={whispSmStatus 11}
|
|
|
|
dhcpClientLease OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP client lease time."
|
|
::={whispSmStatus 12}
|
|
|
|
dhcpCSMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Public DHCP server subnet mask."
|
|
::={whispSmStatus 13}
|
|
|
|
dhcpDfltRterIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Public default router IP address."
|
|
::={whispSmStatus 14}
|
|
|
|
dhcpcdns1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Primary public domain name server."
|
|
::={whispSmStatus 15}
|
|
|
|
dhcpcdns2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Secondary public domain name server."
|
|
::={whispSmStatus 16}
|
|
|
|
dhcpcdns3 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Third public domain name server."
|
|
::={whispSmStatus 17}
|
|
|
|
dhcpDomName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Public domain name server."
|
|
::={whispSmStatus 18}
|
|
|
|
adaptRate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VC adapt rate."
|
|
::={whispSmStatus 20}
|
|
|
|
radioDbmInt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio power level(integer).
|
|
For MIMO radios this is the combined power of the horiztontal and vertical paths."
|
|
::={whispSmStatus 21}
|
|
|
|
dfsStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dynamic frequency shifting status. For DFS Radio only."
|
|
::={whispSmStatus 22}
|
|
|
|
radioTxPwr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx Power level. Valid for FSK and OFDM SMs."
|
|
::={whispSmStatus 23}
|
|
|
|
activeRegion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The active region of the radio."
|
|
::={whispSmStatus 24}
|
|
|
|
snmpBerLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
twoLevelOrMimoQPSK(2),
|
|
fourLevelOrMimo16QAM(4),
|
|
mimo64QAM(6),
|
|
mimo256QAM(8)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BER level.
|
|
For PMP450 systems: 2=MIMO QPSK, 4=MIMO 16-QAM, 6=MIMO64-QAM, 8=256-QAM
|
|
For non PMP450: 2=2 level BER, 4=4 level BER."
|
|
::={whispSmStatus 25}
|
|
|
|
nbBitsRcvd OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of BER bits received (non MIMO platforms only)."
|
|
::={whispSmStatus 26}
|
|
|
|
nbPriBitsErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Primary bit errors (non MIMO platforms only)."
|
|
::={whispSmStatus 27}
|
|
|
|
nbSndBitsErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of secondary bit errors (non MIMO platforms only)."
|
|
::={whispSmStatus 28}
|
|
|
|
primaryBER OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsoleted, invalid type to represent this data. Measured Primary Bit Error Rate."
|
|
::={whispSmStatus 29}
|
|
|
|
secondaryBER OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsoleted, invalid type to represent this data. Measured Secondary Bit Error Rate."
|
|
::={whispSmStatus 30}
|
|
|
|
totalBER OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsoleted, invalid type to represent this data. Measured Total Bit Error Rate."
|
|
::={whispSmStatus 31}
|
|
|
|
minRSSI OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Min. RSSI. Applicable to FSK radios only."
|
|
::={whispSmStatus 32}
|
|
|
|
maxRSSI OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Max. RSSI. Applicable to FSK radios only."
|
|
::={whispSmStatus 33}
|
|
|
|
minJitter OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Min. Jitter. Applicable to FSK radios only."
|
|
::={whispSmStatus 34}
|
|
|
|
maxJitter OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Max. Jitter. Applicable to FSK radios only."
|
|
::={whispSmStatus 35}
|
|
|
|
smSessionTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SM current session timer."
|
|
::={whispSmStatus 36}
|
|
|
|
pppoeSessionStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE Session Status"
|
|
::={whispSmStatus 37}
|
|
|
|
pppoeSessionID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE Session ID"
|
|
::={whispSmStatus 38}
|
|
|
|
pppoeIPCPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE IPCP IP Address"
|
|
::={whispSmStatus 39}
|
|
|
|
pppoeMTUOverrideEn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE MTU Override Setting"
|
|
::={whispSmStatus 40}
|
|
|
|
pppoeMTUValue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE MTU Value"
|
|
::={whispSmStatus 41}
|
|
|
|
pppoeTimerTypeValue OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
keepAlive(1),
|
|
idleTimeout(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE Timer Type. 0 is disabled, 1 is Keep Alive timer, and 2 is Idle Timeout timer."
|
|
::={whispSmStatus 42}
|
|
|
|
pppoeTimeoutValue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE Timeout Period. The use of this depends on the Timer Type. If the Timer Type is KeepAlive, then
|
|
the timeout period is in seconds. If the Timer Type is Idle Timeout, then the timeout period is in minutes."
|
|
::={whispSmStatus 43}
|
|
|
|
pppoeDNSServer1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE DNS Server 1"
|
|
::={whispSmStatus 44}
|
|
|
|
pppoeDNSServer2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE DNS Server 2"
|
|
::={whispSmStatus 45}
|
|
|
|
pppoeControlBytesSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE Control Bytes Sent"
|
|
::={whispSmStatus 46}
|
|
|
|
pppoeControlBytesReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE Control Bytes Received"
|
|
::={whispSmStatus 47}
|
|
|
|
pppoeDataBytesSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE Data Bytes Sent"
|
|
::={whispSmStatus 48}
|
|
|
|
pppoeDataBytesReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE Data Bytes Received"
|
|
::={whispSmStatus 49}
|
|
|
|
pppoeEnabledStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE Enabled"
|
|
::={whispSmStatus 50}
|
|
|
|
pppoeTCPMSSClampEnableStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE TCP MSS Clamping Enable"
|
|
::={whispSmStatus 51}
|
|
|
|
pppoeACNameStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE Access Concentrator In Use"
|
|
::={whispSmStatus 52}
|
|
|
|
pppoeSvcNameStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE Service Name In Use"
|
|
::={whispSmStatus 53}
|
|
|
|
pppoeSessUptime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uptime of current PPPoE Session in ticks"
|
|
::={whispSmStatus 54}
|
|
|
|
primaryBERDisplay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Primary Bit Error Rate.
|
|
Non MIMO platforms only."
|
|
::={whispSmStatus 55}
|
|
|
|
secondaryBERDisplay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Secondary Bit Error Rate.
|
|
FSK platforms only."
|
|
::={whispSmStatus 56}
|
|
|
|
totalBERDisplay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Total Bit Error Rate.
|
|
For MIMO this is combined both paths."
|
|
::={whispSmStatus 57}
|
|
|
|
minRadioDbm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum receive power of beacon in dBm.
|
|
For MIMO radios, this is only available in the vertical path."
|
|
::={whispSmStatus 58}
|
|
|
|
maxRadioDbm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum receive power of beacon in dBm.
|
|
For MIMO radios, this is only available in the vertical path."
|
|
::={whispSmStatus 59}
|
|
|
|
pppoeSessIdleTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Idle Time of current PPPoE Session in ticks"
|
|
::={whispSmStatus 60}
|
|
|
|
radioDbmAvg OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average Receive Power of the AP's beacon in dBm.
|
|
OFDM Radios only.
|
|
For MIMO this is only the verical path, as the beacon is not transmitted on horizontal."
|
|
::={whispSmStatus 61}
|
|
|
|
zoltarFPGAFreqOffset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"FPGA peek of 70001088"
|
|
::={whispSmStatus 62}
|
|
|
|
zoltarSWFreqOffset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"FPGA peek of 7000108C"
|
|
::={whispSmStatus 63}
|
|
|
|
airDelayns OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Round trip delay in nanoseconds."
|
|
::={whispSmStatus 64}
|
|
|
|
currentColorCode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current Color Code of the Registered AP/BHM. A value of -1 is return when the device is not registered."
|
|
::={whispSmStatus 65}
|
|
|
|
currentColorCodePri OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current priority of the Registered color code"
|
|
::={whispSmStatus 66}
|
|
|
|
currentChanFreq OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Current Channel Frequency of the AP/BHM when in session."
|
|
::={whispSmStatus 67}
|
|
|
|
linkQualityBeacon OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering only.
|
|
Link Quality for incoming beacons.
|
|
For Gen II OFDM radios and forward.
|
|
For PMP450 and forward this is vertical path."
|
|
::={whispSmStatus 68}
|
|
|
|
dhcpServerPktXmt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets transmitted by SM DHCP Server"
|
|
::={whispSmStatus 72}
|
|
|
|
dhcpServerPktRcv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets received by SM DHCP Server"
|
|
::={whispSmStatus 73}
|
|
|
|
dhcpServerPktToss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets tossed by SM DHCP Server"
|
|
::={whispSmStatus 74}
|
|
|
|
receiveFragmentsModulationPercentage OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
The percentage of recent fragments received at which modulation.
|
|
For Gen II OFDM only and forward."
|
|
::={whispSmStatus 86}
|
|
|
|
fragmentsReceived1XVertical OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Number of fragments received in 1x modulation.
|
|
For GenII OFDM only and forward.
|
|
For MIMO this is the vertical path."
|
|
::={whispSmStatus 87}
|
|
|
|
fragmentsReceived2XVertical OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Number of fragments received in 2x modulation.
|
|
For GenII OFDM only and forward.
|
|
For MIMO this is the vertical path."
|
|
::={whispSmStatus 88}
|
|
|
|
fragmentsReceived3XVertical OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Number of fragments received in 3x modulation.
|
|
For GenII OFDM only and forward.
|
|
For MIMO this is the vertical path."
|
|
::={whispSmStatus 89}
|
|
|
|
fragmentsReceived4XVertical OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Number of fragments received in 4x modulation.
|
|
For GenII OFDM only and forward.
|
|
For MIMO this is the vertical path."
|
|
::={whispSmStatus 90}
|
|
|
|
linkQualityData1XVertical OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Link Quality for the data VC for QPSK modulation (1X).
|
|
For Gen II OFDM radios and forward only.
|
|
For MIMO this is the vertical path."
|
|
::={whispSmStatus 91}
|
|
|
|
linkQualityData2XVertical OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Link Quality for the data VC for 16-QAM modulation (2X).
|
|
For Gen II OFDM radios and forward only.
|
|
For MIMO this is the vertical path."
|
|
::={whispSmStatus 92}
|
|
|
|
linkQualityData3XVertical OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Link Quality for the data VC for 64-QAM modulation (3X).
|
|
For Gen II OFDM radios and forward only.
|
|
For MIMO this is the vertical path."
|
|
::={whispSmStatus 93}
|
|
|
|
linkQualityData4XVertical OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Link Quality for the data VC for 256-QAM modulation (4X).
|
|
For Gen II OFDM radios and forward only.
|
|
For MIMO this is the vertical path."
|
|
::={whispSmStatus 94}
|
|
|
|
signalToNoiseRatioSMVertical OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An estimated signal to noise ratio based on the last received data.
|
|
For GenII OFDM only and forward.
|
|
For MIMO this is the vertical antenna.
|
|
Will return zero if Signal to Noise Ratio Calculation is disabled."
|
|
::={whispSmStatus 95}
|
|
|
|
rfStatTxSuppressionCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RF Scheduler Stats DFS TX Suppression Count"
|
|
::={whispSmStatus 96}
|
|
|
|
bridgecbUplinkCreditRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sustained uplink data rate."
|
|
::={whispSmStatus 97}
|
|
|
|
bridgecbUplinkCreditLimit OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uplink Burst Allocation."
|
|
::={whispSmStatus 98}
|
|
|
|
bridgecbDownlinkCreditRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sustained uplink data rate."
|
|
::={whispSmStatus 99}
|
|
|
|
bridgecbDownlinkCreditLimit OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uplink Burst Allocation."
|
|
::={whispSmStatus 100}
|
|
|
|
mimoQpskBerDisplay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QPSK BER statistics.
|
|
MIMO platforms only."
|
|
::={whispSmStatus 101}
|
|
|
|
mimo16QamBerDisplay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"16-QAM BER statistics
|
|
MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 102}
|
|
|
|
mimo64QamBerDisplay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"64-QAM BER statistics
|
|
MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 103}
|
|
|
|
mimo256QamBerDisplay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"256-QAM BER statistics
|
|
MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 104}
|
|
|
|
mimoBerRcvModulationType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive modulation type.
|
|
MIMO platforms only."
|
|
::={whispSmStatus 105}
|
|
|
|
signalToNoiseRatioSMHorizontal OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An estimated signal to noise ratio based on the last received data for horizontal antenna.
|
|
MIMO radios only.
|
|
Will return zero if Signal to Noise Ratio Calculation is disabled."
|
|
::={whispSmStatus 106}
|
|
|
|
maxRadioDbmDeprecated OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This OID was inadvertently moved in 12.0.2. Please use maxRadioDbm. This OID is deprecated
|
|
and kept for backwards compatibility."
|
|
::={whispSmStatus 107}
|
|
|
|
signalStrengthRatio OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) -
|
|
power received by the horizontal antenna input (dB).
|
|
MIMO radios only."
|
|
::={whispSmStatus 108}
|
|
|
|
fragmentsReceived1XHorizontal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Number of fragments received in 1x modulation.
|
|
For MIMO radios only.
|
|
For MIMO this is the horizontal path."
|
|
::={whispSmStatus 109}
|
|
|
|
fragmentsReceived2XHorizontal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Number of fragments received in 2x modulation.
|
|
For MIMO radios only.
|
|
For MIMO this is the horizontal path."
|
|
::={whispSmStatus 110}
|
|
|
|
fragmentsReceived3XHorizontal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Number of fragments received in 3x modulation.
|
|
For MIMO radios only.
|
|
For MIMO this is the horizontal path."
|
|
::={whispSmStatus 111}
|
|
|
|
fragmentsReceived4XHorizontal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Number of fragments received in 4x modulation.
|
|
For MIMO radios only.
|
|
For MIMO this is the horizontal path."
|
|
::={whispSmStatus 112}
|
|
|
|
linkQualityData1XHorizontal OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Link Quality for the data VC for QPSK modulation (1X).
|
|
For MIMO radios only.
|
|
For MIMO this is the horizontal path."
|
|
::={whispSmStatus 113}
|
|
|
|
linkQualityData2XHorizontal OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Link Quality for the data VC for 16-QAM modulation (2X).
|
|
For MIMO radios only.
|
|
For MIMO this is the horizontal path."
|
|
::={whispSmStatus 114}
|
|
|
|
linkQualityData3XHorizontal OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Link Quality for the data VC for 64-QAM modulation (3X).
|
|
For MIMO radios only.
|
|
For MIMO this is the horizontal path."
|
|
::={whispSmStatus 115}
|
|
|
|
linkQualityData4XHorizontal OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Link Quality for the data VC for 256-QAM modulation (4X).
|
|
For MIMO radios only.
|
|
For MIMO this is the horizontal path."
|
|
::={whispSmStatus 116}
|
|
|
|
radioDbmHorizontal OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive power level of the horizontal antenna in dBm.
|
|
MIMO radios only."
|
|
::={whispSmStatus 117}
|
|
|
|
radioDbmVertical OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive power level of the vertical antenna in dBm.
|
|
MIMO radios only."
|
|
::={whispSmStatus 118}
|
|
|
|
bridgecbDownlinkMaxBurstBitRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum burst downlink rate."
|
|
::={whispSmStatus 119}
|
|
|
|
bridgecbUplinkMaxBurstBitRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum burst uplink Rate."
|
|
::={whispSmStatus 120}
|
|
|
|
currentCyclicPrefix OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
one-quarter(0),
|
|
one-eighth(1),
|
|
one-sixteenth(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Current Cyclic Prefix of the AP/BHM when in session."
|
|
::={whispSmStatus 121}
|
|
|
|
currentBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bandwidth5mhz(1),
|
|
bandwidth10mhz(3),
|
|
bandwidth20mhz(5)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Current Bandwidth of the AP/BHM when in session."
|
|
::={whispSmStatus 122}
|
|
|
|
berPwrRxFPGAPathA OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BER power level on FPGA Rx Path A of SM."
|
|
::={whispSmStatus 123}
|
|
|
|
berPwrRxFPGAPathB OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BER power level on FPGA Rx Path B of SM."
|
|
::={whispSmStatus 124}
|
|
|
|
rawBERPwrRxPathA OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Raw unadjusted BER power level on FPGA Rx Path A of SM."
|
|
::={whispSmStatus 125}
|
|
|
|
rawBERPwrRxPathB OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Raw unadjusted BER power level on FPGA Rx Path B of SM."
|
|
::={whispSmStatus 126}
|
|
|
|
radioModeStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undefined(0),
|
|
pmp430(1),
|
|
pmp450Interoperability(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current radio mode that SM is operating in.
|
|
PMP 430 SMs only.
|
|
Introduced in release 12.2."
|
|
::={whispSmStatus 127}
|
|
|
|
adaptRateLowPri OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noSession(0),
|
|
rate1X(1),
|
|
rate2X(2),
|
|
rete3X(3),
|
|
rate4X(4),
|
|
rate6X(6),
|
|
rate8X(8)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current transmitting rate of the low priority VC.
|
|
0 : SM is not in session
|
|
1 : 1X QPSK SISO
|
|
2 : 2X 16-QAM SISO or QPSK MIMO
|
|
3 : 3X 64-QAM SISO
|
|
4 : 4X 256-QAM SISO or 16-QAM MIMO
|
|
6 : 6X 64-QAM MIMO
|
|
8 : 8X 256-QAM MIMO"
|
|
::={whispSmStatus 128}
|
|
|
|
adaptRateHighPri OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noHighPriorityChannel(-1),
|
|
noSession(0),
|
|
rate1X(1),
|
|
rate2X(2),
|
|
rete3X(3),
|
|
rate4X(4),
|
|
rate6X(6),
|
|
rate8X(8)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current transmitting rate of the high priority VC.
|
|
-1 : High Priority Channel not configured
|
|
0 : SM is not in session
|
|
1 : 1X QPSK SISO
|
|
2 : 2X 16-QAM SISO or QPSK MIMO
|
|
3 : 3X 64-QAM SISO
|
|
4 : 4X 256-QAM SISO or 16-QAM MIMO
|
|
6 : 6X 64-QAM MIMO
|
|
8 : 8X 256-QAM MIMO"
|
|
::={whispSmStatus 129}
|
|
|
|
bitErrorsQSPKpathA OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit errors received from BER packet at QPSK path A.
|
|
Valid MIMO platforms only."
|
|
::={whispSmStatus 130}
|
|
|
|
bitErrorsQSPKpathB OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit errors received from BER packet at QPSK path B.
|
|
Valid MIMO platforms only."
|
|
::={whispSmStatus 131}
|
|
|
|
bitErrors16QAMpathA OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit errors received from BER packet at 16-QAM path A.
|
|
Valid MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 132}
|
|
|
|
bitErrors16QAMpathB OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit errors received from BER packet at 16-QAM path B.
|
|
Valid MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 133}
|
|
|
|
bitErrors64QAMpathA OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit errors received from BER packet at 64-QAM path A.
|
|
Valid MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 134}
|
|
|
|
bitErrors64QAMpathB OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit errors received from BER packet at 64-QAM path B.
|
|
Valid MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 135}
|
|
|
|
bitErrors256QAMpathA OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit errors received from BER packet at 256-QAM path A.
|
|
Valid MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 136}
|
|
|
|
bitErrors256QAMpathB OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit errors received from BER packet at 256-QAM path B.
|
|
Valid MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 137}
|
|
|
|
bitsReceivedPerPathModulation OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit received from BER.
|
|
To calculate Bit Error Rate, take bit errors at a modulation and path and divide by this OID.
|
|
To get combined BER add errors and divide by this multiplied by each path and modulation.
|
|
i.e. MIMO QPSK combined BER = ((errors on path A) + (errors on path B))/(bits recieved per path modulation * 2)
|
|
Valid MIMO platforms only."
|
|
::={whispSmStatus 138}
|
|
|
|
dhcpServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of DHCP server hosts."
|
|
::= {whispSmStatus 19}
|
|
|
|
dhcpServerEntry OBJECT-TYPE
|
|
SYNTAX DhcpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of DHCP server hosts."
|
|
INDEX {hostIp}
|
|
::= {dhcpServerTable 1}
|
|
|
|
DhcpServerEntry ::= SEQUENCE{
|
|
hostIp IpAddress,
|
|
hostMacAddress PhysAddress,
|
|
hostLease TimeTicks
|
|
}
|
|
|
|
hostIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP server IP address."
|
|
::={dhcpServerEntry 1}
|
|
|
|
hostMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Private host MAC address."
|
|
::={dhcpServerEntry 2}
|
|
|
|
hostLease OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lease time assigned by DHCP server host."
|
|
::={dhcpServerEntry 3}
|
|
|
|
whispSmConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rfScanList,
|
|
rfScanListBandFilter,
|
|
powerUpMode,
|
|
lanIpSm,
|
|
lanMaskSm,
|
|
defaultGwSm,
|
|
networkAccess,
|
|
authKeySm,
|
|
enable8023link,
|
|
authKeyOption,
|
|
timingPulseGated,
|
|
naptPrivateIP,
|
|
naptPrivateSubnetMask,
|
|
naptPublicIP,
|
|
naptPublicSubnetMask,
|
|
naptPublicGatewayIP,
|
|
naptRFPublicIP,
|
|
naptRFPublicSubnetMask,
|
|
naptRFPublicGateway,
|
|
naptEnable,
|
|
arpCacheTimeout,
|
|
tcpGarbageCollectTmout,
|
|
udpGarbageCollectTmout,
|
|
dhcpClientEnable,
|
|
dhcpServerEnable,
|
|
dhcpServerLeaseTime,
|
|
dhcpIPStart,
|
|
dnsAutomatic,
|
|
prefferedDNSIP,
|
|
alternateDNSIP,
|
|
natDNSProxyEnable,
|
|
spectrumAnalysisDisplay,
|
|
dmzIP,
|
|
dmzEnable,
|
|
dhcpNumIPsToLease,
|
|
pppoeFilter,
|
|
smbFilter,
|
|
snmpFilter,
|
|
userP1Filter,
|
|
userP2Filter,
|
|
userP3Filter,
|
|
allOtherIpFilter,
|
|
allIpv4Filter,
|
|
upLinkBCastFilter,
|
|
arpFilter,
|
|
allOthersFilter,
|
|
userDefinedPort1,
|
|
port1TCPFilter,
|
|
port1UDPFilter,
|
|
userDefinedPort2,
|
|
port2TCPFilter,
|
|
port2UDPFilter,
|
|
userDefinedPort3,
|
|
port3TCPFilter,
|
|
port3UDPFilter,
|
|
bootpcFilter,
|
|
bootpsFilter,
|
|
ip4MultFilter,
|
|
ingressVID,
|
|
lowPriorityUplinkCIR,
|
|
lowPriorityDownlinkCIR,
|
|
hiPriorityChannel,
|
|
hiPriorityUplinkCIR,
|
|
hiPriorityDownlinkCIR,
|
|
smRateAdapt,
|
|
upLnkMaxBurstDataRate,
|
|
upLnkDataRate,
|
|
upLnkLimit,
|
|
dwnLnkMaxBurstDataRate,
|
|
cyclicPrefixScan,
|
|
bandwidthScan,
|
|
apSelection,
|
|
radioBandscanConfig,
|
|
forcepoweradjust,
|
|
clearBerrResults,
|
|
berrautoupdateflag,
|
|
testSMBER,
|
|
dwnLnkDataRate,
|
|
dwnLnkLimit,
|
|
dfsConfig,
|
|
ethAccessFilterEnable,
|
|
ipAccessFilterEnable,
|
|
allowedIPAccess1,
|
|
allowedIPAccess2,
|
|
allowedIPAccess3,
|
|
allowedIPAccessNMLength1,
|
|
allowedIPAccessNMLength2,
|
|
allowedIPAccessNMLength3,
|
|
rfDhcpState,
|
|
bCastMIR,
|
|
bhsReReg,
|
|
smLEDModeFlag,
|
|
ethAccessEnable,
|
|
pppoeEnable,
|
|
pppoeAuthenticationType,
|
|
pppoeAccessConcentrator,
|
|
pppoeServiceName,
|
|
pppoeUserName,
|
|
pppoePassword,
|
|
pppoeTCPMSSClampEnable,
|
|
pppoeMTUOverrideEnable,
|
|
pppoeMTUOverrideValue,
|
|
pppoeTimerType,
|
|
pppoeTimeoutPeriod,
|
|
timedSpectrumAnalysisDuration,
|
|
spectrumAnalysisScanBandwidth,
|
|
spectrumAnalysisOnBoot,
|
|
spectrumAnalysisAction,
|
|
pppoeConnectOD,
|
|
pppoeDisconnectOD,
|
|
smAntennaType,
|
|
natConnectionType,
|
|
wanPingReplyEnable,
|
|
packetFilterDirection,
|
|
colorCode2,
|
|
colorCodepriority2,
|
|
colorCode3,
|
|
colorCodepriority3,
|
|
colorCode4,
|
|
colorCodepriority4,
|
|
colorCode5,
|
|
colorCodepriority5,
|
|
colorCode6,
|
|
colorCodepriority6,
|
|
colorCode7,
|
|
colorCodepriority7,
|
|
colorCode8,
|
|
colorCodepriority8,
|
|
colorCode9,
|
|
colorCodepriority9,
|
|
colorCode10,
|
|
colorCodepriority10,
|
|
berDeModSelect,
|
|
multicastVCRcvRate,
|
|
syslogServerApPreferred,
|
|
syslogMinLevelApPreferred,
|
|
syslogSMXmitSetting,
|
|
syslogSMXmitControl,
|
|
naptRemoteManage,
|
|
eapPeerAAAServerCommonName,
|
|
pmp430ApRegistrationOptions,
|
|
switchRadioModeAndReboot}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Canopy Subscriber Module configuration group."
|
|
::= {whispSmGroups 1}
|
|
|
|
whispSmStatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
sessionStatus,
|
|
rssi,
|
|
jitter,
|
|
airDelay,
|
|
radioSlicingSm,
|
|
radioTxGainSm,
|
|
calibrationStatus,
|
|
radioDbm,
|
|
registeredToAp,
|
|
dhcpCip,
|
|
dhcpSip,
|
|
dhcpClientLease,
|
|
dhcpCSMask,
|
|
dhcpDfltRterIP,
|
|
dhcpcdns1,
|
|
dhcpcdns2,
|
|
dhcpcdns3,
|
|
dhcpDomName,
|
|
adaptRate,
|
|
adaptRateLowPri,
|
|
adaptRateHighPri,
|
|
bitErrorsQSPKpathA,
|
|
bitErrorsQSPKpathB,
|
|
bitErrors16QAMpathA,
|
|
bitErrors16QAMpathB,
|
|
bitErrors64QAMpathA,
|
|
bitErrors64QAMpathB,
|
|
bitErrors256QAMpathA,
|
|
bitErrors256QAMpathB,
|
|
bitsReceivedPerPathModulation,
|
|
radioDbmInt,
|
|
dfsStatus,
|
|
radioTxPwr,
|
|
activeRegion,
|
|
snmpBerLevel,
|
|
nbBitsRcvd,
|
|
nbPriBitsErr,
|
|
nbSndBitsErr,
|
|
primaryBER,
|
|
secondaryBER,
|
|
totalBER,
|
|
minRSSI,
|
|
maxRSSI,
|
|
minJitter,
|
|
maxJitter,
|
|
smSessionTimer,
|
|
pppoeSessionStatus,
|
|
pppoeSessionID,
|
|
pppoeIPCPAddress,
|
|
pppoeMTUOverrideEn,
|
|
pppoeMTUValue,
|
|
pppoeTimerTypeValue,
|
|
pppoeTimeoutValue,
|
|
pppoeDNSServer1,
|
|
pppoeDNSServer2,
|
|
pppoeControlBytesSent,
|
|
pppoeControlBytesReceived,
|
|
pppoeDataBytesSent,
|
|
pppoeDataBytesReceived,
|
|
pppoeEnabledStatus,
|
|
pppoeTCPMSSClampEnableStatus,
|
|
pppoeACNameStatus,
|
|
pppoeSvcNameStatus,
|
|
pppoeSessUptime,
|
|
primaryBERDisplay,
|
|
secondaryBERDisplay,
|
|
totalBERDisplay,
|
|
mimoQpskBerDisplay,
|
|
mimo16QamBerDisplay,
|
|
mimo64QamBerDisplay,
|
|
mimo256QamBerDisplay,
|
|
mimoBerRcvModulationType,
|
|
minRadioDbm,
|
|
maxRadioDbm,
|
|
maxRadioDbmDeprecated,
|
|
pppoeSessIdleTime,
|
|
radioDbmAvg,
|
|
zoltarFPGAFreqOffset,
|
|
zoltarSWFreqOffset,
|
|
airDelayns,
|
|
currentColorCode,
|
|
currentColorCodePri,
|
|
currentChanFreq,
|
|
linkQualityBeacon,
|
|
currentCyclicPrefix,
|
|
currentBandwidth,
|
|
berPwrRxFPGAPathA,
|
|
berPwrRxFPGAPathB,
|
|
rawBERPwrRxPathA,
|
|
rawBERPwrRxPathB,
|
|
linkQualityData1XVertical,
|
|
linkQualityData2XVertical,
|
|
linkQualityData3XVertical,
|
|
linkQualityData4XVertical,
|
|
linkQualityData1XHorizontal,
|
|
linkQualityData2XHorizontal,
|
|
linkQualityData3XHorizontal,
|
|
linkQualityData4XHorizontal,
|
|
signalToNoiseRatioSMVertical,
|
|
signalToNoiseRatioSMHorizontal,
|
|
signalStrengthRatio,
|
|
radioDbmHorizontal,
|
|
radioDbmVertical,
|
|
rfStatTxSuppressionCount,
|
|
receiveFragmentsModulationPercentage,
|
|
fragmentsReceived1XVertical,
|
|
fragmentsReceived2XVertical,
|
|
fragmentsReceived3XVertical,
|
|
fragmentsReceived4XVertical,
|
|
fragmentsReceived1XHorizontal,
|
|
fragmentsReceived2XHorizontal,
|
|
fragmentsReceived3XHorizontal,
|
|
fragmentsReceived4XHorizontal,
|
|
bridgecbUplinkCreditRate,
|
|
bridgecbUplinkCreditLimit,
|
|
bridgecbDownlinkCreditRate,
|
|
bridgecbDownlinkCreditLimit,
|
|
bridgecbDownlinkMaxBurstBitRate,
|
|
bridgecbUplinkMaxBurstBitRate,
|
|
radioModeStatus}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Canopy Subscriber Module status group."
|
|
::= {whispSmGroups 2}
|
|
|
|
whispSmNotifGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
enterSpectrumAnalysis,
|
|
availableSpectrumAnalysis,
|
|
whispRadarDetected,
|
|
whispRadarEnd,
|
|
smNatWanDHCPClientEvent,
|
|
smNatRFPubDHCPClientEvent}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WHiSP SMs notification group."
|
|
::= {whispSmGroups 3}
|
|
|
|
whispMappingTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
tableIndex,
|
|
protocol,
|
|
port,
|
|
localIp}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Canopy SM NAT port mapping Table group."
|
|
::= {whispSmGroups 4}
|
|
|
|
-- DFS events
|
|
|
|
whispRadarDetected NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dfsStatus,
|
|
whispBoxEsn}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radar detected transmit stopped."
|
|
::={whispSmDfsEvent 1}
|
|
|
|
whispRadarEnd NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dfsStatus,
|
|
whispBoxEsn}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radar ended back to normal transmit."
|
|
::={whispSmDfsEvent 2}
|
|
|
|
-- Spectrum Analysis Events
|
|
|
|
enterSpectrumAnalysis NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
whispBoxEsn}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entering spectrum analysis.
|
|
physAddress - MAC address of the SM"
|
|
::={whispSmSpAnEvent 1}
|
|
|
|
-- Spectrum Analysis Events
|
|
|
|
availableSpectrumAnalysis NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
whispBoxEsn}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Spectrum analysis is complete, SM is re-registered with AP and results are available.
|
|
physAddress - MAC address of the SM"
|
|
::={whispSmSpAnEvent 2}
|
|
|
|
-- SM NAT WAN DHCP Client Event
|
|
|
|
smNatWanDHCPClientEvent NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dhcpCip,
|
|
whispBoxEsn}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAT WAN DHCP Client has received a new address via DHCP."
|
|
::={whispSmDHCPClientEvent 1}
|
|
|
|
-- SM NAT RF Public DHCP Client Event
|
|
|
|
smNatRFPubDHCPClientEvent NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dhcpRfPublicIp,
|
|
whispBoxEsn}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAT RF Public DHCP Client has received a new address via DHCP."
|
|
::={whispSmDHCPClientEvent 2}
|
|
|
|
clearLinkStats OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this to a nonzero value will clear the link stats."
|
|
::={whispSmControls 1}
|
|
|
|
whispMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WhispMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAT port mapping information table."
|
|
::= {whispSm 5}
|
|
|
|
whispMappingEntry OBJECT-TYPE
|
|
SYNTAX WhispMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mapping table entry."
|
|
INDEX {tableIndex}
|
|
::= {whispMappingTable 1}
|
|
|
|
WhispMappingEntry ::= SEQUENCE{
|
|
tableIndex INTEGER,
|
|
protocol INTEGER,
|
|
port INTEGER,
|
|
localIp IpAddress
|
|
}
|
|
|
|
tableIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User information table index."
|
|
::={whispMappingEntry 1}
|
|
|
|
protocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Protocol type: 0:both UDP and TCP, 1:UDP, 2:TCP."
|
|
::={whispMappingEntry 2}
|
|
|
|
port OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Application port number. e.g. 23=telnet, 21=ftp etc. Should be a positive integer."
|
|
::={whispMappingEntry 3}
|
|
|
|
localIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP of local host to which the incoming packet mapped to an application should be forwarded."
|
|
::={whispMappingEntry 4}
|
|
|
|
whispSmTranslationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WhispSmTranslationTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Translation Table."
|
|
::= {whispSm 6}
|
|
|
|
whispSmTranslationTableEntry OBJECT-TYPE
|
|
SYNTAX WhispSmTranslationTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Translation Table Entry."
|
|
INDEX {whispTranslationTableIndex}
|
|
::= {whispSmTranslationTable 1}
|
|
|
|
WhispSmTranslationTableEntry ::= SEQUENCE{
|
|
whispTranslationTableIndex INTEGER,
|
|
whispTranslationTableMacAddr MacAddress,
|
|
whispTranslationTableIpAddr IpAddress,
|
|
whispTranslationTableAge Counter32
|
|
}
|
|
|
|
whispTranslationTableIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..127)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index into translation table."
|
|
::={whispSmTranslationTableEntry 1}
|
|
|
|
whispTranslationTableMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC Address of the registered enity."
|
|
::={whispSmTranslationTableEntry 2}
|
|
|
|
whispTranslationTableIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ip Address of the registered entity."
|
|
::={whispSmTranslationTableEntry 3}
|
|
|
|
whispTranslationTableAge OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Age of the registered entity."
|
|
::={whispSmTranslationTableEntry 4}
|
|
|
|
|
|
END
|