librenms/mibs/S5-ETHERNET-TRAP-MIB
Adam Amstrong 7445a736a6 move nortel mibs to root
git-svn-id: http://www.observium.org/svn/observer/trunk@1576 61d68cd4-352d-0410-923a-c4978735b2b8
2010-07-31 16:07:50 +00:00

171 lines
6.1 KiB
Plaintext

S5-ETHERNET-TRAP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
s5EnPortPartStatus, s5EnPortJabberStatus,
s5EnPortLinkStatus
FROM S5-ETHERNET-COMMON-MIB
s5EnRedPortCompanionBrdNum, s5EnRedPortCompanionPortNum,
s5EnRedPortRemoteOperStatus, s5EnRedPortRedundMode,
s5EnRedPortOperStatus
FROM S5-ETH-REDUNDANT-LINKS-MIB
s5EthTrap
FROM S5-ROOT-MIB
s5SbsViolationStatusBrdIndx,
s5SbsViolationStatusPortIndx,
s5SbsViolationStatusMACAddress,
s5SbsMgmViolationType,
s5SbsMgmViolationIpAddress
FROM S5-SWITCH-BAYSECURE-MIB;
s5EthernetTrapMib MODULE-IDENTITY
LAST-UPDATED "200407200000Z"
ORGANIZATION "Nortel Networks"
CONTACT-INFO "Nortel Networks"
DESCRIPTION
"5000 Ethernet Trap MIB
Copyright 1993-2004 Nortel Networks, Inc.
All rights reserved.
This Nortel Networks SNMP Management Information Base Specification
(Specification) embodies Nortel Networks' confidential and
proprietary intellectual property. Nortel Networks retains all
title and ownership in the Specification, including any
revisions.
This Specification is supplied 'AS IS,' and Nortel Networks makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification."
REVISION "200407200000Z" -- 20 July 2004
DESCRIPTION "Version 118: Conversion to SMIv2"
::= { s5EthTrap 0 }
-- SECTION 2: SynOptics 5000 Ethernet Trap Definitions
s5EtrPortAutoPart NOTIFICATION-TYPE
OBJECTS { s5EnPortPartStatus,
s5EnPortJabberStatus }
STATUS current
DESCRIPTION
"A port was auto partitioned (wrapped). This
trap is sent only once when the condition is
first detected. The following values are
returned:
s5EnPortPartStatus.....the partition status
of the port, with the instance identifying
the board and the port.
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port."
::= { s5EthTrap 1 }
s5EtrPortDteJabbering NOTIFICATION-TYPE
OBJECTS { s5EnPortJabberStatus }
STATUS current
DESCRIPTION
"An ethernet DTE started jabbering. This trap
is sent only once when the condition is first
detected. The following values are returned:
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port."
::= { s5EthTrap 2 }
s5EtrRedPortFailure NOTIFICATION-TYPE
OBJECTS { s5EnRedPortOperStatus,
s5EnRedPortCompanionBrdNum,
s5EnRedPortCompanionPortNum,
s5EnPortPartStatus,
s5EnPortLinkStatus,
s5EnPortJabberStatus }
STATUS current
DESCRIPTION
"A port that is in a redundant pair developed a fault.
This trap is sent once when the condition is
first detected. For all objects returned in the trap,
the instance identifies the board and the port index.
The following values are returned:
s5EnRedPortOperStatus.........The status of the port.
The value will distinguish between a
local fault, a remote fault, and a
missing board.
s5EnRedPortCompanionBrdNum....The index of the slot
containing the board of the other port
in the redundant pair.
s5EnRedPortCompanionPortNum...The index of the other
port in the redundant pair.
s5EnPortPartStatus, s5EnPortLinkStatus and
s5EnPortJabberStatus..........These values may help
determine the cause of the local fault."
::= { s5EthTrap 3 }
s5EtrRedBadRemCfgDetected NOTIFICATION-TYPE
OBJECTS { s5EnRedPortRemoteOperStatus,
s5EnRedPortRedundMode}
STATUS current
DESCRIPTION
"This trap is sent periodically when the NMM detects a
remoteOperStatus of invalid on a port set for
redundancy. The instance identifies the board and port
index. The following values are returned:
s5EnRedPortRemoteOperStatus.....The value of the
received signal from the remote port.
s5EnRedPortRedundMode...the redundancy mode of the port."
::= { s5EthTrap 4 }
s5EtrSbsMacAccessViolation NOTIFICATION-TYPE
OBJECTS { s5SbsViolationStatusBrdIndx,
s5SbsViolationStatusPortIndx,
s5SbsViolationStatusMACAddress}
STATUS current
DESCRIPTION
"This trap is sent when the switch device detects a
Mac_address based security violation on a port set by
s5SbsSecurityAction defined in s5sbs100.mib. This trap
is sent only once when the condition is first detected.
The following values are returned:
s5SbsViolationStatusBrdIndx...the Board number on which
a security violation was seen.
s5SbsViolationStatusPortIndx...the Port number on which
a security violation was seen.
s5SbsViolationStatusMACIndx...the mac address triggers
this violation"
::= { s5EthTrap 5 }
s5EtrMgmAccessViolation NOTIFICATION-TYPE
OBJECTS { s5SbsMgmViolationType,
s5SbsMgmViolationIpAddress}
STATUS current
DESCRIPTION
"This trap is sent when the switch device detects a
management access violation on the switch. This trap
is sent only once when the condition is first detected.
The following values are returned:
s5SbsMgmViolationType.....WEB access violation or telnet
access violation or SNMP access violation.
s5SbsMgmViolationIpAddress...the invalid IP address."
::= { s5EthTrap 6 }
s5EtrPortManualPart NOTIFICATION-TYPE
OBJECTS { s5EnPortPartStatus,
s5EnPortJabberStatus }
STATUS current
DESCRIPTION
"A port was manually partitioned (wrapped). This
trap is sent once when the port is initially
partitioned. The following values are
returned:
s5EnPortPartStatus.....the partition status
of the port, with the instance identifying
the board and the port.
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port."
::= { s5EthTrap 7 }
END