clones/librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-09-29 06:16:43 +00:00
Code Issues Packages Projects Releases Wiki Activity
c4572c206a
librenms/mibs/junos/mib-jnx-optics.txt
laf 79c9bb50fe Updated all junos mibs + new ones
2015-04-20 09:18:06 +01:00

2747 lines
93 KiB
Plaintext
Raw Blame History

--
-- Juniper Enterprise Specific MIB: Optics management
--
-- Copyright (c) 2012-2013, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
JUNIPER-IFOPTICS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, TimeTicks, NOTIFICATION-TYPE,
Unsigned32, Counter32, Integer32
FROM SNMPv2-SMI
DateAndTime, TEXTUAL-CONVENTION, TruthValue
FROM SNMPv2-TC
ifIndex, ifDescr
FROM IF-MIB
jnxOpticsMibRoot, jnxOpticsNotifications
FROM JUNIPER-SMI;
jnxIfOpticsMib MODULE-IDENTITY
LAST-UPDATED "201201261414Z" -- Thu Jan 26 14:14:51 PST 2012
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Technical Assistance Center
Juniper Networks, Inc.
1194 N. Mathilda Avenue
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"This MIB module defines objects used for managing the
Optics interface for Juniper products."
REVISION "201201260000Z"
DESCRIPTION
"Added Optics Config, Alarms and PM data."
REVISION "201201260000Z"
DESCRIPTION
"Initial revision."
::= { jnxOpticsMibRoot 1 }
--
-- Textual Conventions
--
JnxOpticsLocation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION " Near End or Far End "
SYNTAX INTEGER {
jnxNearEnd(1),
jnxFarEnd(2)
}
JnxOpticsDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION " Indicates the direction as Rx/Tx or bi-directional."
SYNTAX INTEGER {
jnxTxDir(1),
jnxRxDir(2),
jnxBiDir(3)
}
JnxOpticsSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION " Severity of the Notification"
SYNTAX INTEGER {
jnxCritical(1),
jnxMajor(2),
jnxMinor(3),
jnxInfo(4)
}
JnxOpticsServiceStateAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION " Notification's action on the service state"
SYNTAX INTEGER {
jnxNotSupported(0),
jnxNonServiceAffecting(1),
jnxServiceAffecting(2)
}
JnxOpticsChannelSpacing ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Channel spacing
1 - 100 Ghz
2 - 50 GHz
3 - 25 GHz
4 - 12.5 GHz
5 - 6.25 Ghz "
SYNTAX INTEGER {
spacing100Ghz(1),
spacing50Ghz(2),
spacing25Ghz(3),
spacing12point5Ghz(4),
spacing6point5Ghz(5)
}
--
-- All the notifications related to the optics module
--
JnxOpticsNotificationId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Optic alarm types"
SYNTAX INTEGER {
jnxOpticsLOS(1), -- input loss of signal
jnxOpticsWavelenthLockErr(2), -- wavelength lock
jnxOpticsPowerHighAlarm(3), -- Tx high power alarm
jnxOpticsPowerLowAlarm(4), -- Tx low power alarm
jnxOpticsBiasCurrentHighAlarm(5), -- Bias Current High
jnxOpticsBiasCurrentLowAlarm(6), -- Bias Current Low
jnxOpticsTemperatureHighAlarm(7), -- Temperature High
jnxOpticsTemperaturelowAlarm(8), -- Temperature low
jnxOpticsTxPLLLockAlarm(9), -- Tx PLL Lock
jnxOpticsRxPLLLockAlarm(10), -- Rx PLL Lock
jnxOpticsAvgPowerAlarm(11), -- Avg Power
jnxOpticsRxLossAvgPowerAlarm(12), -- Rx Loss Avg Power
jnxOpticsLossofACPowerAlarm(13), -- Loss of AC Power
jnxOpticsTxPowerHighThreshAlert(14), -- Tx Power High TCA
jnxOpticsTxPowerLowThreshAlert(15), -- Tx Power Low TCA
jnxOpticsRxPowerHighThreshAlert(16), -- Rx Power High TCA
jnxOpticsRxPowerLowThreshAlert(17), -- Rx Power Low TCA
jnxOpticsModuleTempHighThreshAlert(18), -- Temp High TCA
jnxOpticsModuleTempLowThreshAlert(19), -- Temp Low TCA
jnxOptics24HourTxPowerHighThreshAlert(20), -- 24 HourTxPowerHigh TCA
jnxOptics24HourTxPowerLowThreshAlert(21), -- 24 HourTxPowerLow TCA
jnxOptics24HourRxPowerHighThreshAlert(22), -- 24 HourRxPowerHigh TCA
jnxOptics24HourRxPowerLowThreshAlert(23), -- 24 HourRxPowerLow TCA
jnxOptics24HourModuleTempHighThreshAlert(24), -- 24 Hour Temp High TCA
jnxOptics24HourModuleTempLowThreshAlert(25), -- 24 Hour Temp Low TCA
jnxOpticsRxPowerHighAlarm(26), -- Rx high power alarm
jnxOpticsRxPowerLowAlarm(27), -- Rx high power alarm
jnxOpticsTxPowerHighWarning(28), -- Rx high power warning
jnxOpticsTxPowerLowWarning(29), -- Rx high power warning
jnxOpticsRxPowerHighWarning(30), -- Rx high power warning
jnxOpticsRxPowerLowWarning(31), -- Rx high power warning
jnxOpticsModuleTempHighWarning(32), -- Mod temp high warning
jnxOpticsModuleTempLowWarning(33), -- Mod temp low warning
jnxOpticsRxCarrierFreqHigh(34), -- rx Carrier freq high
-- warning
jnxOpticsRxCarrierFreqLow(35), -- rx Carrier freq low
-- warning
jnxOpticsChromaticDispHighWarning(36), -- CD high warning
jnxOpticsChromaticDispLowWarning(37), -- CD low warning
jnxOpticsQLowWarning(38), -- Q low warning
jnxOpticsOSNRLowWarning(39), -- OSNR low warning
jnxOpticsCarrierFreqHighAlert(40), -- Carrier freq high
-- TCA
jnxOpticsCarrierFreqLowAlert(41), -- Carrier freq Low
-- TCA
jnxOptics24HourCarrierFreqHighAlert(42), -- Carrier freq high
-- TCA 24Hour
jnxOptics24HourCarrierFreqLowAlert(43) -- Carrier freq Low
-- TCA 24Hour
}
jnxOptics OBJECT IDENTIFIER ::= { jnxIfOpticsMib 1 }
jnxOpticsPerformanceMonitoring OBJECT IDENTIFIER ::= { jnxIfOpticsMib 2 }
jnxOpticsAlarm OBJECT IDENTIFIER ::= { jnxIfOpticsMib 3 }
--
-- Optics config table
--
jnxOpticsConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the optics config Table. "
::= { jnxOptics 1 }
jnxOpticsConfigEntry OBJECT-TYPE
SYNTAX JnxOpticsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the optics
config Table."
INDEX { jnxOpticsConfigContainerIndex, jnxOpticsConfigL1Index,
jnxOpticsConfigL2Index, jnxOpticsConfigL3Index }
::= { jnxOpticsConfigTable 1 }
JnxOpticsConfigEntry ::=
SEQUENCE {
jnxOpticsConfigContainerIndex
Integer32,
jnxOpticsConfigL1Index
Integer32,
jnxOpticsConfigL2Index
Integer32,
jnxOpticsConfigL3Index
Integer32,
jnxOpticsType
Integer32,
jnxLaserEnable
TruthValue,
jnxWavelength
Unsigned32,
jnxSpacing
JnxOpticsChannelSpacing,
jnxModulation
Unsigned32,
jnxTxOpticalPower
Integer32,
jnxRxOpticalPower
Integer32,
jnxModuleTempHighThresh
Integer32,
jnxModuleTempLowThresh
Integer32,
jnxTxPowerHighThresh
Integer32,
jnxTxPowerLowThresh
Integer32,
jnxRxPowerHighThresh
Integer32,
jnxRxPowerLowThresh
Integer32,
jnx24HourModuleTempHighThresh
Integer32,
jnx24HourModuleTempLowThresh
Integer32,
jnx24HourTxPowerHighThresh
Integer32,
jnx24HourTxPowerLowThresh
Integer32,
jnx24HourRxPowerHighThresh
Integer32,
jnx24HourRxPowerLowThresh
Integer32,
jnxRxLosPowerWarningThresh
Integer32,
jnxRxLosPowerAlarmThresh
Integer32,
jnxOpticsCurrentStatus
BITS,
jnxTxPowerHighEnableTCA
TruthValue,
jnxTxPowerLowEnableTCA
TruthValue,
jnxRxPowerHighEnableTCA
TruthValue,
jnxRxPowerLowEnableTCA
TruthValue,
jnxModuleTempHighEnableTCA
TruthValue,
jnxModuleTempLowEnableTCA
TruthValue,
jnxCarFreqOffsetHighEnableTCA
TruthValue,
jnxCarFreqOffsetLowEnableTCA
TruthValue,
jnxCarFreqOffsetHighThresh
Integer32,
jnx24HourCarFreqOffsetHighThresh
Integer32,
jnxCarFreqOffsetLowThresh
Integer32,
jnx24HourCarFreqOffsetLowThresh
Integer32
}
jnxOpticsConfigContainerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The associated jnxContentsContainerIndex - eg shelf.."
::= { jnxOpticsConfigEntry 1 }
jnxOpticsConfigL1Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level one index associated with this subject ... eg fpc
slot."
::= { jnxOpticsConfigEntry 2 }
jnxOpticsConfigL2Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level two index associated with this subject .. eg pic
slot."
::= { jnxOpticsConfigEntry 3 }
jnxOpticsConfigL3Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level three index associated with this subject.. eg port."
::= { jnxOpticsConfigEntry 4 }
jnxOpticsType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" 0 - none
1 - SFP
2 - XFP
3 - SFP+
4 - XFP+
5 - CFP
6 - CFP+
7 - Non pluggable "
::= { jnxOpticsConfigEntry 5 }
jnxLaserEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0 - laser off
1 - laser on "
::= { jnxOpticsConfigEntry 6 }
jnxWavelength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "0.01 nm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The transmit wavelength of the laser."
::= { jnxOpticsConfigEntry 7 }
jnxSpacing OBJECT-TYPE
SYNTAX JnxOpticsChannelSpacing
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A minimum nominal difference in frequency (GHz) between two
adjacent channels."
::= { jnxOpticsConfigEntry 8 }
jnxModulation OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Modulation
Unknown - (1),
NonPSK - (2),
ODB - (3),
DPSK - (4),
QPSK - (5),
DQPSK - (6),
DPQPSK - (7),
16QAM - (8),
64QAM - (9),
256QAM - (10)
"
::= { jnxOpticsConfigEntry 9 }
jnxTxOpticalPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmit optical power."
::= { jnxOpticsConfigEntry 10 }
jnxRxOpticalPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive optical power."
::= { jnxOpticsConfigEntry 11 }
jnxModuleTempHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius (0.01 degrees C)"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High module temerature in degree fahrenheit for a 15 minute period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 12 }
jnxModuleTempLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius (0.01 degrees C)"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Low module temerature in degree fahrenheit for a 15 minute period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 13 }
jnxTxPowerHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tx power for a 15 minute period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 14 }
jnxTxPowerLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tx Power for a 15 minute period below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 15 }
jnxRxPowerHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rx power for a 15 minute period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 16 }
jnxRxPowerLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rx Power for a 15 minute period below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 17 }
jnx24HourModuleTempHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius (0.01 degrees C)"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High module temerature in degree fahrenheit for a 24 hour period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 18 }
jnx24HourModuleTempLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius (0.01 degrees C)"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Low module temerature in degree fahrenheit for a 24 hour period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 19 }
jnx24HourTxPowerHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tx power for a 24 hour period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 20 }
jnx24HourTxPowerLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tx for a 24 hour period Power below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 21 }
jnx24HourRxPowerHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rx power for a 24 hour period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 22 }
jnx24HourRxPowerLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rx Power for a 24 hour period below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 23 }
jnxRxLosPowerWarningThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rx Power warning threshold for seeting the optical LOS
warning. "
::= { jnxOpticsConfigEntry 24 }
jnxRxLosPowerAlarmThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rx Power alarm threshold for seeting the optical LOS
warning. "
::= { jnxOpticsConfigEntry 25 }
jnxOpticsCurrentStatus OBJECT-TYPE
SYNTAX BITS {
opticalLos(1),
wavelenthLockErr(2),
powerHighAlarm(3),
powerLowAlarm(4),
biasCurrentHighAlarm(5),
biasCurrentLowAlarm(6),
temperatureHighAlarm(7),
temperaturelowAlarm(8),
txPLLLockAlarm(9),
rxPLLLockAlarm(10),
avgPowerAlarm(11),
rxLossAvgPowerAlarm(12),
lossofACPowerAlarm(13),
txPowerHighThreshAlert(14),
txPowerLowThreshAlert(15),
rxPowerHighThreshAlert(16),
rxPowerLowThreshAlert(17),
moduleTempHighThreshAlert(18),
moduleTempLowThreshAlert(19),
txPowerHigh24HourThreshAlert(20),
txPowerLow24HourThreshAlert(21),
rxPowerHigh24HourThreshAlert(22),
rxPowerLow24HourThreshAlert(23),
moduleTempHigh24HourThreshAlert(24),
moduleTempLow24HourThreshAlert(25),
powerRxHighAlarm(26),
powerRxLowAlarm(27),
powerTxHighWarning(28),
powerTxLowWarning(29),
powerRxHighWarning(30),
powerRxLowWarning(31),
temperatureHighWarning(32),
temperaturelowWarning(33)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { jnxOpticsConfigEntry 26 }
jnxTxPowerHighEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable for the Tx Power High TCA."
::= { jnxOpticsConfigEntry 27 }
jnxTxPowerLowEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable for the Tx Power Low TCA."
::= { jnxOpticsConfigEntry 28 }
jnxRxPowerHighEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable for the Rx Power High TCA."
::= { jnxOpticsConfigEntry 29 }
jnxRxPowerLowEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable for the Rx Power Low TCA."
::= { jnxOpticsConfigEntry 30 }
jnxModuleTempHighEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable for the Module Temp High TCA."
::= { jnxOpticsConfigEntry 31 }
jnxModuleTempLowEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable for the Module Temp Low TCA."
::= { jnxOpticsConfigEntry 32 }
jnxCarFreqOffsetHighEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable for the Carrier Frequency Offset High TCA."
::= { jnxOpticsConfigEntry 33 }
jnxCarFreqOffsetLowEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable for the CarrierFreqOffetLow TCA's."
::= { jnxOpticsConfigEntry 34 }
jnxCarFreqOffsetHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Carrier frequency offset for a 15 minute period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 35 }
jnx24HourCarFreqOffsetHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Carrier frequency offset for a 24 Hour period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 36 }
jnxCarFreqOffsetLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Carrier frequency offset for a 15 minute period Low which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 37 }
jnx24HourCarFreqOffsetLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Carrier frequency offset for a 24 Hour period Low which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 38 }
--
-- Tracetone config
--
jnxOpticsTraceToneCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsTraceToneCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the optics tests."
::= { jnxOptics 2 }
jnxOpticsTraceToneCfgEntry OBJECT-TYPE
SYNTAX JnxOpticsTraceToneCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the optics FRU's."
INDEX { jnxOpticsTraceToneCfgContainerIndex,
jnxOpticsTraceToneCfgL1Index,
jnxOpticsTraceToneCfgL2Index,
jnxOpticsTraceToneCfgL3Index }
::= { jnxOpticsTraceToneCfgTable 1 }
JnxOpticsTraceToneCfgEntry ::=
SEQUENCE {
jnxOpticsTraceToneCfgContainerIndex Integer32,
jnxOpticsTraceToneCfgL1Index Integer32,
jnxOpticsTraceToneCfgL2Index Integer32,
jnxOpticsTraceToneCfgL3Index Integer32,
jnxOpticsTraceToneCfgTxEnable TruthValue,
jnxOpticsTraceToneCfgRxEnable TruthValue,
jnxOpticsTraceToneCfgDestId OCTET STRING,
jnxOpticsTraceToneCfgTxMsg OCTET STRING,
jnxOpticsTraceToneCfgRxMsg OCTET STRING
}
jnxOpticsTraceToneCfgContainerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The associated jnxContentsContainerIndex - eg shelf.."
::= { jnxOpticsTraceToneCfgEntry 1 }
jnxOpticsTraceToneCfgL1Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level one index associated with this subject ... eg fpc
slot."
::= { jnxOpticsTraceToneCfgEntry 2 }
jnxOpticsTraceToneCfgL2Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level two index associated with this subject .. eg pic
slot."
::= { jnxOpticsTraceToneCfgEntry 3 }
jnxOpticsTraceToneCfgL3Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level three index associated with this subject..
eg port."
::= { jnxOpticsTraceToneCfgEntry 4 }
jnxOpticsTraceToneCfgTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will enable/disable the transmit Trace tone feature."
::= { jnxOpticsTraceToneCfgEntry 5 }
jnxOpticsTraceToneCfgRxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will enable/disable the receive Trace tone feature."
::= { jnxOpticsTraceToneCfgEntry 6 }
jnxOpticsTraceToneCfgDestId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the destination Id of the link
ID/ the chassis and the blade.
The transmit messages will also have the src id
which is this chassis id and this port info."
::= { jnxOpticsTraceToneCfgEntry 7 }
jnxOpticsTraceToneCfgTxMsg OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will be the transmit data in the tracetone message."
::= { jnxOpticsTraceToneCfgEntry 8 }
jnxOpticsTraceToneCfgRxMsg OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This will be the receive data in the trace tone message."
::= { jnxOpticsTraceToneCfgEntry 9 }
--
-- Notification Trigger Table
--
jnxOpticsNotificationTrigDefaultHoldtimeUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object will indicate the time (ms) for the defect to
persist before it is declared an alarm.
"
::= { jnxOptics 3 }
jnxOpticsNotificationTrigDefaultHoldtimeDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object will indicate the time (ms) for the defect to
absent before the alarm is cleared.
"
::= { jnxOptics 4 }
--
-- Table to configure individual optics notifications
--
jnxOpticsNotificationTrigTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsNotificationTrigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the otn Alarm/Alart/Info trigger table. "
::= { jnxOptics 5 }
jnxOpticsNotificationTrigEntry OBJECT-TYPE
SYNTAX JnxOpticsNotificationTrigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the Otn
Alarm Trigger Table.
"
INDEX { jnxOpticsNotificationTrigContainerIndex,
jnxOpticsNotificationTrigL1Index,
jnxOpticsNotificationTrigL2Index,
jnxOpticsNotificationTrigL3Index,
jnxOpticsNotificationTrigAlmId }
::= { jnxOpticsNotificationTrigTable 1 }
JnxOpticsNotificationTrigEntry ::=
SEQUENCE {
jnxOpticsNotificationTrigContainerIndex
Integer32,
jnxOpticsNotificationTrigL1Index
Integer32,
jnxOpticsNotificationTrigL2Index
Integer32,
jnxOpticsNotificationTrigL3Index
Integer32,
jnxOpticsNotificationTrigAlmId
JnxOpticsNotificationId,
jnxOpticsNotificationTrigSeverity
JnxOpticsSeverity,
jnxOpticsNotificationTrigIgnore
TruthValue,
jnxOpticsNotificationTrigHoldtimeUp
Integer32,
jnxOpticsNotificationTrigHoldtimeDown
Integer32,
jnxOpticsTrigServiceStateAction
JnxOpticsServiceStateAction
}
jnxOpticsNotificationTrigContainerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The associated jnxContentsContainerIndex - eg shelf."
::= { jnxOpticsNotificationTrigEntry 1 }
jnxOpticsNotificationTrigL1Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level one index associated with this subject ... eg fpc
slot."
::= { jnxOpticsNotificationTrigEntry 2 }
jnxOpticsNotificationTrigL2Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level two index associated with this subject .. eg pic
slot."
::= { jnxOpticsNotificationTrigEntry 3 }
jnxOpticsNotificationTrigL3Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level three index associated with this subject..
eg port.
"
::= { jnxOpticsNotificationTrigEntry 4 }
jnxOpticsNotificationTrigAlmId OBJECT-TYPE
SYNTAX JnxOpticsNotificationId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This will be the type of Alarm as defined by
JnxOpticsNotificationId
"
::= { jnxOpticsNotificationTrigEntry 5 }
jnxOpticsNotificationTrigSeverity OBJECT-TYPE
SYNTAX JnxOpticsSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This will be the Severity of the Notification.
"
::= { jnxOpticsNotificationTrigEntry 6 }
jnxOpticsNotificationTrigIgnore OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object will ignore the alarm when set.
"
::= { jnxOpticsNotificationTrigEntry 7 }
jnxOpticsNotificationTrigHoldtimeUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object will indicate the time (ms) for the defect to
persist before it is declared an alarm.
"
::= { jnxOpticsNotificationTrigEntry 8 }
jnxOpticsNotificationTrigHoldtimeDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object will indicate the time (ms) the defect is
absent before the alarm is cleared.
"
::= { jnxOpticsNotificationTrigEntry 9 }
jnxOpticsTrigServiceStateAction OBJECT-TYPE
SYNTAX JnxOpticsServiceStateAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This will indicate whether this alarm is service affecting
or not .
"
::= { jnxOpticsNotificationTrigEntry 10 }
--
-- Optical PM data
--
jnxOpticsPMCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsPMCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of current PM entries."
::= { jnxOpticsPerformanceMonitoring 1 }
jnxOpticsPMCurrentEntry OBJECT-TYPE
SYNTAX JnxOpticsPMCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the PM Current
Table."
INDEX { ifIndex }
::= { jnxOpticsPMCurrentTable 1 }
JnxOpticsPMCurrentEntry ::= SEQUENCE {
jnxPMCurChromaticDispersion
Integer32,
jnxPMCurDiffGroupDelay
Integer32,
jnxPMCurPolarizationState
Integer32,
jnxPMCurPolarDepLoss
Integer32,
jnxPMCurQ
Integer32,
jnxPMCurSNR
Integer32,
jnxPMCurTxOutputPower
Integer32,
jnxPMCurRxInputPower
Integer32,
jnxPMCurMinChromaticDispersion
Integer32,
jnxPMCurMaxChromaticDispersion
Integer32,
jnxPMCurAvgChromaticDispersion
Integer32,
jnxPMCurMinDiffGroupDelay
Integer32,
jnxPMCurMaxDiffGroupDelay
Integer32,
jnxPMCurAvgDiffGroupDelay
Integer32,
jnxPMCurMinPolarState
Integer32,
jnxPMCurMaxPolarState
Integer32,
jnxPMCurAvgPolarState
Integer32,
jnxPMCurMinPolarDepLoss
Integer32,
jnxPMCurMaxPolarDepLoss
Integer32,
jnxPMCurAvgPolarDepLoss
Integer32,
jnxPMCurMinQ
Integer32,
jnxPMCurMaxQ
Integer32,
jnxPMCurAvgQ
Integer32,
jnxPMCurMinSNR
Integer32,
jnxPMCurMaxSNR
Integer32,
jnxPMCurAvgSNR
Integer32,
jnxPMCurMinTxOutputPower
Integer32,
jnxPMCurMaxTxOutputPower
Integer32,
jnxPMCurAvgTxOutputPower
Integer32,
jnxPMCurMinRxInputPower
Integer32,
jnxPMCurMaxRxInputPower
Integer32,
jnxPMCurAvgRxInputPower
Integer32,
jnxPMCurSuspectedFlag
TruthValue,
jnxPMCurSuspectReason
Integer32,
jnxPMCurTxLaserBiasCurrent
Integer32,
jnxPMCurMinTxLaserBiasCurrent
Integer32,
jnxPMCurMaxTxLaserBiasCurrent
Integer32,
jnxPMCurAvgTxLaserBiasCurrent
Integer32,
jnxPMCurTemperature
Integer32,
jnxPMCurMinTemperature
Integer32,
jnxPMCurMaxTemperature
Integer32,
jnxPMCurAvgTemperature
Integer32,
jnxPMCurCarFreqOffset
Integer32,
jnxPMCurMinCarFreqOffset
Integer32,
jnxPMCurMaxCarFreqOffset
Integer32,
jnxPMCurAvgCarFreqOffset
Integer32,
jnxPMCurRxLaserBiasCurrent
Integer32,
jnxPMCurMinRxLaserBiasCurrent
Integer32,
jnxPMCurMaxRxLaserBiasCurrent
Integer32,
jnxPMCurAvgRxLaserBiasCurrent
Integer32
}
jnxPMCurChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port"
::= { jnxOpticsPMCurrentEntry 1 }
jnxPMCurDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential group delay "
::= { jnxOpticsPMCurrentEntry 2 }
jnxPMCurPolarizationState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Polarization state "
::= { jnxOpticsPMCurrentEntry 3 }
jnxPMCurPolarDepLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The polarisation dependent loss (PDL) is the difference (in dB)
between the maximum and minimum values of the channel insertion
loss (or gain) of the black-link from point SS to RS due to a
variation of the state of polarization (SOP) over all SOPs"
::= { jnxOpticsPMCurrentEntry 4 }
jnxPMCurQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"'Q' factor estimated at Rx Transceiver port "
::= { jnxOpticsPMCurrentEntry 5 }
jnxPMCurSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR - signal to noise ratio"
::= { jnxOpticsPMCurrentEntry 6 }
jnxPMCurTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower - transmit output power "
::= { jnxOpticsPMCurrentEntry 7 }
jnxPMCurRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower - receive output power"
::= { jnxOpticsPMCurrentEntry 8 }
jnxPMCurMinChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Residual Chromatic Dispersion measured at Rx Transceiver
port"
::= { jnxOpticsPMCurrentEntry 9 }
jnxPMCurMaxChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Residual Chromatic Dispersion measured at Rx Transceiver
port"
::= { jnxOpticsPMCurrentEntry 10 }
jnxPMCurAvgChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Residual Chromatic Dispersion measured at Rx Transceiver
port"
::= { jnxOpticsPMCurrentEntry 11 }
jnxPMCurMinDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Differential group delay "
::= { jnxOpticsPMCurrentEntry 12 }
jnxPMCurMaxDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Differential group delay "
::= { jnxOpticsPMCurrentEntry 13 }
jnxPMCurAvgDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Differential group delay "
::= { jnxOpticsPMCurrentEntry 14 }
jnxPMCurMinPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Polarization state "
::= { jnxOpticsPMCurrentEntry 15 }
jnxPMCurMaxPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Polarization state "
::= { jnxOpticsPMCurrentEntry 16 }
jnxPMCurAvgPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg Polarization state "
::= { jnxOpticsPMCurrentEntry 17 }
jnxPMCurMinPolarDepLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min - The polarisation dependent loss (PDL)"
::= { jnxOpticsPMCurrentEntry 18 }
jnxPMCurMaxPolarDepLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max - The polarisation dependent loss (PDL)"
::= { jnxOpticsPMCurrentEntry 19 }
jnxPMCurAvgPolarDepLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg - The polarisation dependent loss (PDL)"
::= { jnxOpticsPMCurrentEntry 20 }
jnxPMCurMinQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min 'Q' factor estimated at Rx Transceiver port "
::= { jnxOpticsPMCurrentEntry 21 }
jnxPMCurMaxQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max 'Q' factor estimated at Rx Transceiver port "
::= { jnxOpticsPMCurrentEntry 22 }
jnxPMCurAvgQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg 'Q' factor estimated at Rx Transceiver port "
::= { jnxOpticsPMCurrentEntry 23 }
jnxPMCurMinSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min SNR - signal to noise ratio"
::= { jnxOpticsPMCurrentEntry 24 }
jnxPMCurMaxSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max SNR - signal to noise ratio"
::= { jnxOpticsPMCurrentEntry 25 }
jnxPMCurAvgSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg SNR - signal to noise ratio"
::= { jnxOpticsPMCurrentEntry 26 }
jnxPMCurMinTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min TxOutputPower - transmit output power "
::= { jnxOpticsPMCurrentEntry 27 }
jnxPMCurMaxTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max TxOutputPower - transmit output power "
::= { jnxOpticsPMCurrentEntry 28 }
jnxPMCurAvgTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg TxOutputPower - transmit output power "
::= { jnxOpticsPMCurrentEntry 29 }
jnxPMCurMinRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min RxInputPower - receive output power"
::= { jnxOpticsPMCurrentEntry 30 }
jnxPMCurMaxRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max RxInputPower - receive output power"
::= { jnxOpticsPMCurrentEntry 31 }
jnxPMCurAvgRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg RxInputPower - receive output power"
::= { jnxOpticsPMCurrentEntry 32 }
jnxPMCurSuspectedFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the data in this entry may be unreliable."
::= { jnxOpticsPMCurrentEntry 33 }
jnxPMCurSuspectReason OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - interval too short secs < 890
7 - interval too long secs > 910
8 - near end unavailable
9 - far end unavailable
10 - partial data
11 - missing intervals due to restarts
"
::= { jnxOpticsPMCurrentEntry 34 }
jnxPMCurTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trasmit LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 35 }
jnxPMCurMinTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum trasmit LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 36 }
jnxPMCurMaxTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum trasmit LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 37 }
jnxPMCurAvgTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 38 }
jnxPMCurTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 39 }
jnxPMCurMinTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Temperature measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 40 }
jnxPMCurMaxTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Temperature measure at Transceiver port"
::= { jnxOpticsPMCurrentEntry 41 }
jnxPMCurAvgTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Temperature measure at Transceiver port"
::= { jnxOpticsPMCurrentEntry 42 }
jnxPMCurCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 43 }
jnxPMCurMinCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 44 }
jnxPMCurMaxCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 45 }
jnxPMCurAvgCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 46 }
jnxPMCurRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 47 }
jnxPMCurMinRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Minimum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 48 }
jnxPMCurMaxRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Maximum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 49 }
jnxPMCurAvgRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Average LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 50 }
--
-- PM Interval Table
--
jnxOpticsPMIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsPMIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of current PM entries."
::= { jnxOpticsPerformanceMonitoring 2 }
jnxOpticsPMIntervalEntry OBJECT-TYPE
SYNTAX JnxOpticsPMIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the PM Interval
Table."
INDEX { ifIndex, jnxOpticsPMIntervalNumber }
::= { jnxOpticsPMIntervalTable 1 }
JnxOpticsPMIntervalEntry ::= SEQUENCE {
jnxOpticsPMIntervalNumber
Unsigned32,
jnxPMIntMinChromaticDispersion
Integer32,
jnxPMIntMaxChromaticDispersion
Integer32,
jnxPMIntAvgChromaticDispersion
Integer32,
jnxPMIntMinDiffGroupDelay
Integer32,
jnxPMIntMaxDiffGroupDelay
Integer32,
jnxPMIntAvgDiffGroupDelay
Integer32,
jnxPMIntMinPolarState
Integer32,
jnxPMIntMaxPolarState
Integer32,
jnxPMIntAvgPolarState
Integer32,
jnxPMIntMinPolarDependentLoss
Integer32,
jnxPMIntMaxPolarDependentLoss
Integer32,
jnxPMIntAvgPolarDependentLoss
Integer32,
jnxPMIntMinQ
Integer32,
jnxPMIntMaxQ
Integer32,
jnxPMIntAvgQ
Integer32,
jnxPMIntMinSNR
Integer32,
jnxPMIntMaxSNR
Integer32,
jnxPMIntAvgSNR
Integer32,
jnxPMIntMinTxOutputPower
Integer32,
jnxPMIntMaxTxOutputPower
Integer32,
jnxPMIntAvgTxOutputPower
Integer32,
jnxPMIntMinRxInputPower
Integer32,
jnxPMIntMaxRxInputPower
Integer32,
jnxPMIntAvgRxInputPower
Integer32,
jnxPMIntTimeStamp
DateAndTime,
jnxPMIntSuspectedFlag
TruthValue,
jnxPMIntSuspectReason
Integer32,
jnxPMIntMinTxLaserBiasCurrent
Integer32,
jnxPMIntMaxTxLaserBiasCurrent
Integer32,
jnxPMIntAvgTxLaserBiasCurrent
Integer32,
jnxPMIntMinTemperature
Integer32,
jnxPMIntMaxTemperature
Integer32,
jnxPMIntAvgTemperature
Integer32,
jnxPMIntMinCarFreqOffset
Integer32,
jnxPMIntMaxCarFreqOffset
Integer32,
jnxPMIntAvgCarFreqOffset
Integer32,
jnxPMIntMinRxLaserBiasCurrent
Integer32,
jnxPMIntMaxRxLaserBiasCurrent
Integer32,
jnxPMIntAvgRxLaserBiasCurrent
Integer32
}
jnxOpticsPMIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32(1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the 15 mintute interavl number."
::= { jnxOpticsPMIntervalEntry 1 }
jnxPMIntMinChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 2 }
jnxPMIntMaxChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - max in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 3 }
jnxPMIntAvgChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - average in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 4 }
jnxPMIntMinDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential group delay measured at Rx Transceiver
port -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 5 }
jnxPMIntMaxDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential group delay measured at Rx Transceiver
port -- max in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 6 }
jnxPMIntAvgDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential group delay measured at Rx Transceiver
port -- average in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 7 }
jnxPMIntMinPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 8 }
jnxPMIntMaxPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- max in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 9 }
jnxPMIntAvgPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- average in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 10 }
jnxPMIntMinPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 11 }
jnxPMIntMaxPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- max in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 12 }
jnxPMIntAvgPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- average in the 15 minute
interval"
::= { jnxOpticsPMIntervalEntry 13 }
jnxPMIntMinQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 14 }
jnxPMIntMaxQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- max in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 15 }
jnxPMIntAvgQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- Avg in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 16 }
jnxPMIntMinSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 17 }
jnxPMIntMaxSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- max in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 18 }
jnxPMIntAvgSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- avg in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 19 }
jnxPMIntMinTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 20 }
jnxPMIntMaxTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- max in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 21 }
jnxPMIntAvgTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- average in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 22 }
jnxPMIntMinRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 23}
jnxPMIntMaxRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- max in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 24 }
jnxPMIntAvgRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- average in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 25 }
jnxPMIntTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time stamp PM interval"
::= { jnxOpticsPMIntervalEntry 26 }
jnxPMIntSuspectedFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the data in this entry may be unreliable."
::= { jnxOpticsPMIntervalEntry 27 }
jnxPMIntSuspectReason OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - interval too short secs < 890
7 - interval too long secs > 910
8 - near end unavailable
9 - far end unavailable
10 - partial data
11 - missing intervals due to restarts
"
::= { jnxOpticsPMIntervalEntry 28 }
jnxPMIntMinTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Minimum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 29 }
jnxPMIntMaxTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Maximum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 30 }
jnxPMIntAvgTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Average LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 31 }
jnxPMIntMinTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Temperature measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 32 }
jnxPMIntMaxTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Temperature measure at Transceiver port"
::= { jnxOpticsPMIntervalEntry 33 }
jnxPMIntAvgTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Temperature measure at Transceiver port"
::= { jnxOpticsPMIntervalEntry 34 }
jnxPMIntMinCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "Mhz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 35 }
jnxPMIntMaxCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 36 }
jnxPMIntAvgCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 37 }
jnxPMIntMinRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive Minimum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 38 }
jnxPMIntMaxRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive Maximum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 39 }
jnxPMIntAvgRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive Average LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 40 }
--
-- Cur/Prev Day Table
--
jnxOpticsPMDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsPMDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of current PM Day entries."
::= { jnxOpticsPerformanceMonitoring 3 }
jnxOpticsPMDayEntry OBJECT-TYPE
SYNTAX JnxOpticsPMDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the PM Day
Table"
INDEX { ifIndex, jnxOpticsPMDayIndex }
::= { jnxOpticsPMDayTable 1 }
JnxOpticsPMDayEntry ::= SEQUENCE {
jnxOpticsPMDayIndex
Unsigned32,
jnxPMDayMinChromaticDispersion
Integer32,
jnxPMDayMaxChromaticDispersion
Integer32,
jnxPMDayAvgChromaticDispersion
Integer32,
jnxPMDayMinDiffGroupDelay
Integer32,
jnxPMDayMaxDiffGroupDelay
Integer32,
jnxPMDayAvgDiffGroupDelay
Integer32,
jnxPMDayMinPolarState
Integer32,
jnxPMDayMaxPolarState
Integer32,
jnxPMDayAvgPolarState
Integer32,
jnxPMDayMinPolarDependentLoss
Integer32,
jnxPMDayMaxPolarDependentLoss
Integer32,
jnxPMDayAvgPolarDependentLoss
Integer32,
jnxPMDayMinQ
Integer32,
jnxPMDayMaxQ
Integer32,
jnxPMDayAvgQ
Integer32,
jnxPMDayMinSNR
Integer32,
jnxPMDayMaxSNR
Integer32,
jnxPMDayAvgSNR
Integer32,
jnxPMDayMinTxOutputPower
Integer32,
jnxPMDayMaxTxOutputPower
Integer32,
jnxPMDayAvgTxOutputPower
Integer32,
jnxPMDayMinRxInputPower
Integer32,
jnxPMDayMaxRxInputPower
Integer32,
jnxPMDayAvgRxInputPower
Integer32,
jnxPMDayTimeStamp
DateAndTime,
jnxPMDaySuspectedFlag
TruthValue,
jnxPMDaySuspectReason
Integer32,
jnxPMDayMinTxLaserBiasCurrent
Integer32,
jnxPMDayMaxTxLaserBiasCurrent
Integer32,
jnxPMDayAvgTxLaserBiasCurrent
Integer32,
jnxPMDayMinTemperature
Integer32,
jnxPMDayMaxTemperature
Integer32,
jnxPMDayAvgTemperature
Integer32,
jnxPMDayMinCarFreqOffset
Integer32,
jnxPMDayMaxCarFreqOffset
Integer32,
jnxPMDayAvgCarFreqOffset
Integer32,
jnxPMDayMinRxLaserBiasCurrent
Integer32,
jnxPMDayMaxRxLaserBiasCurrent
Integer32,
jnxPMDayAvgRxLaserBiasCurrent
Integer32
}
jnxOpticsPMDayIndex OBJECT-TYPE
SYNTAX Unsigned32(1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is 1 - cur day/ 2 - prev day "
::= { jnxOpticsPMDayEntry 1 }
jnxPMDayMinChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - min in the day"
::= { jnxOpticsPMDayEntry 2 }
jnxPMDayMaxChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - max in the day"
::= { jnxOpticsPMDayEntry 3 }
jnxPMDayAvgChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - average in the day"
::= { jnxOpticsPMDayEntry 4 }
jnxPMDayMinDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential Group Delay measured at Rx Transceiver
port -- min in the day"
::= { jnxOpticsPMDayEntry 5 }
jnxPMDayMaxDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential Group Delay measured at Rx Transceiver
port -- max in the day"
::= { jnxOpticsPMDayEntry 6 }
jnxPMDayAvgDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential Group Delay measured at Rx Transceiver
port -- average in the day"
::= { jnxOpticsPMDayEntry 7 }
jnxPMDayMinPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- min in the day"
::= { jnxOpticsPMDayEntry 8 }
jnxPMDayMaxPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- max in the day"
::= { jnxOpticsPMDayEntry 9 }
jnxPMDayAvgPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- average in the day"
::= { jnxOpticsPMDayEntry 10 }
jnxPMDayMinPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- min in the day"
::= { jnxOpticsPMDayEntry 11 }
jnxPMDayMaxPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- max in the day"
::= { jnxOpticsPMDayEntry 12 }
jnxPMDayAvgPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- average in the day
interval"
::= { jnxOpticsPMDayEntry 13 }
jnxPMDayMinQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- min in the day"
::= { jnxOpticsPMDayEntry 14 }
jnxPMDayMaxQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- max in the day"
::= { jnxOpticsPMDayEntry 15 }
jnxPMDayAvgQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- Avg in the day"
::= { jnxOpticsPMDayEntry 16 }
jnxPMDayMinSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- min in the day"
::= { jnxOpticsPMDayEntry 17 }
jnxPMDayMaxSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- max in the day"
::= { jnxOpticsPMDayEntry 18 }
jnxPMDayAvgSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- avg in the day"
::= { jnxOpticsPMDayEntry 19 }
jnxPMDayMinTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- min in the day"
::= { jnxOpticsPMDayEntry 20 }
jnxPMDayMaxTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- max in the day."
::= { jnxOpticsPMDayEntry 21 }
jnxPMDayAvgTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- average in the day."
::= { jnxOpticsPMDayEntry 22 }
jnxPMDayMinRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- min in the day."
::= { jnxOpticsPMDayEntry 23}
jnxPMDayMaxRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- max in the day."
::= { jnxOpticsPMDayEntry 24 }
jnxPMDayAvgRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- average in the day."
::= { jnxOpticsPMDayEntry 25 }
jnxPMDayTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time for the Day."
::= { jnxOpticsPMDayEntry 26 }
jnxPMDaySuspectedFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the data in this entry may be unreliable."
::= { jnxOpticsPMDayEntry 27 }
jnxPMDaySuspectReason OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - partial data
7 - one or more intervals are invaild
"
::= { jnxOpticsPMDayEntry 28 }
jnxPMDayMinTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMDayEntry 29 }
jnxPMDayMaxTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Minimum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMDayEntry 30 }
jnxPMDayAvgTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Maximum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMDayEntry 31 }
jnxPMDayMinTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Temperature measured at Transceiver port"
::= { jnxOpticsPMDayEntry 32 }
jnxPMDayMaxTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Temperature measure at Transceiver port"
::= { jnxOpticsPMDayEntry 33 }
jnxPMDayAvgTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Temperature measure at Transceiver port"
::= { jnxOpticsPMDayEntry 34 }
jnxPMDayMinCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "Mhz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMDayEntry 35 }
jnxPMDayMaxCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMDayEntry 36 }
jnxPMDayAvgCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMDayEntry 37 }
jnxPMDayMinRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMDayEntry 38 }
jnxPMDayMaxRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive Minimum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMDayEntry 39 }
jnxPMDayAvgRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive Maximum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMDayEntry 40 }
--
-- Optics Alarm/Alert Table
--
jnxOpticsNotificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Notification entries."
::= { jnxOpticsAlarm 1 }
jnxOpticsNotificationEntry OBJECT-TYPE
SYNTAX JnxOpticsNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual entry in the Notification table."
INDEX { ifIndex, jnxOpticsNotificationLocation,
jnxOpticsNotificationDirection
}
::= { jnxOpticsNotificationTable 1 }
JnxOpticsNotificationEntry ::= SEQUENCE {
jnxOpticsNotificationLocation
JnxOpticsLocation,
jnxOpticsNotificationDirection
JnxOpticsDirection,
jnxOpticsNotificationSeverity
JnxOpticsSeverity,
jnxOpticsLastNotificationId
JnxOpticsNotificationId,
jnxOpticsNotificationDate
DateAndTime
}
jnxOpticsNotificationLocation OBJECT-TYPE
SYNTAX JnxOpticsLocation
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies indicates if this entry was for
Near end/Far end."
::= { jnxOpticsNotificationEntry 1 }
jnxOpticsNotificationDirection OBJECT-TYPE
SYNTAX JnxOpticsDirection
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies indicates if this entry was for
for the Tx/Rx or both."
::= { jnxOpticsNotificationEntry 2 }
jnxOpticsLastNotificationId OBJECT-TYPE
SYNTAX JnxOpticsNotificationId
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies the OTN alarm that most recently
was set or cleared."
::= { jnxOpticsNotificationEntry 3 }
jnxOpticsNotificationSeverity OBJECT-TYPE
SYNTAX JnxOpticsSeverity
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies the severity of the last alarm/alert
that most recently was set or cleared."
::= { jnxOpticsNotificationEntry 4 }
jnxOpticsNotificationDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This specifies the date and time when this alarm occurred."
::= { jnxOpticsNotificationEntry 5 }
--
-- Clear PM's for Interfaces
--
-- Clear for all Performance monitoring counters on this interface
--
jnxOpticsClearAllPMs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" To clear all optics Performance monitoring counters on all
interfaces. "
::= { jnxOptics 6 }
jnxOpticsClearIfPMsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsClearIfPMsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" To clear optics Performance monitoring counters on this
interfaces "
INDEX { ifIndex }
::= { jnxOptics 7 }
jnxOpticsClearIfPMsEntry OBJECT-TYPE
SYNTAX JnxOpticsClearIfPMsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that s used to clear the Optics PM Table."
INDEX { ifIndex }
::= { jnxOpticsClearIfPMsTable 1 }
JnxOpticsClearIfPMsEntry ::=
SEQUENCE {
jnxOpticsClearCurrent
TruthValue,
jnxOpticsClearInterfaceInterval
TruthValue,
jnxOpticsClearInterfaceDay
TruthValue,
jnxOpticsClearInterfaceAll
TruthValue
}
jnxOpticsClearCurrent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1- to clear all the Current Optics PM's for this interface
"
::= { jnxOpticsClearIfPMsEntry 1 }
jnxOpticsClearInterfaceInterval OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1- to clear all the Optics PM's intervals(1-96) for this
interface
"
::= { jnxOpticsClearIfPMsEntry 2 }
jnxOpticsClearInterfaceDay OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1 - to clear all the Current Day and Previous Day Optics PM's
for this interface
"
::= { jnxOpticsClearIfPMsEntry 3 }
jnxOpticsClearInterfaceAll OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1 - to clear all the Optics PM's for this interface
"
::= { jnxOpticsClearIfPMsEntry 4 }
--
-- Alarm/Alert Notifications
--
jnxOpticsNotificationPrefix OBJECT IDENTIFIER ::=
{ jnxOpticsNotifications 0 }
jnxOpticsNotificationSet NOTIFICATION-TYPE
OBJECTS {
jnxOpticsNotificationLocation,
jnxOpticsNotificationDirection,
ifDescr,
jnxOpticsLastNotificationId,
jnxOpticsNotificationSeverity,
jnxOpticsNotificationDate
}
STATUS current
DESCRIPTION
"Notification of a recently set optics alarm."
::= { jnxOpticsNotificationPrefix 1 }
jnxOpticsNotificationCleared NOTIFICATION-TYPE
OBJECTS {
jnxOpticsNotificationLocation,
jnxOpticsNotificationDirection,
ifDescr,
jnxOpticsLastNotificationId,
jnxOpticsNotificationSeverity,
jnxOpticsNotificationDate
}
STATUS current
DESCRIPTION
"Notification of a recently cleared optics alarm."
::= { jnxOpticsNotificationPrefix 2 }
END
Reference in New Issue View Git Blame Copy Permalink