librenms/mibs/Wellfleet-DOT1QTAG-CONFIG-MIB
Adam Amstrong 7445a736a6 move nortel mibs to root
git-svn-id: http://www.observium.org/svn/observer/trunk@1576 61d68cd4-352d-0410-923a-c4978735b2b8
2010-07-31 16:07:50 +00:00

152 lines
3.6 KiB
Plaintext

Wellfleet-DOT1QTAG-CONFIG-MIB DEFINITIONS ::= BEGIN
-- First created by Rahul Mehta 07/25/97 for 802.1q VLAN tagging in the router.
IMPORTS
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB
wfDot1qTagConfigGroup
FROM Wellfleet-COMMON-MIB;
wfDot1qTagConfig OBJECT IDENTIFIER ::= { wfDot1qTagConfigGroup 1 }
wfDot1qTagConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfDot1qTagConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains the global read-write
802.1q VLAN tagging attributes on a per circuit
basis. Here circuit number is the Local VLAN Id."
::= { wfDot1qTagConfig 1 }
wfDot1qTagConfigEntry OBJECT-TYPE
SYNTAX WfDot1qTagConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information maintained for each circuit."
INDEX {wfDot1qTagCfgPhysicalPortId,
wfDot1qTagCfgLocalVlanId }
::= { wfDot1qTagConfigTable 1 }
WfDot1qTagConfigEntry ::= SEQUENCE {
wfDot1qTagCfgDelete
INTEGER,
wfDot1qTagCfgDisable
INTEGER,
wfDot1qTagCfgVlanName
DisplayString,
wfDot1qTagCfgLocalVlanId
INTEGER,
wfDot1qTagCfgGlobalVlanId
INTEGER,
wfDot1qTagCfgVirtualPortType
INTEGER,
wfDot1qTagCfgPhysicalPortId
INTEGER,
wfDot1qTagCfgProtocolType
INTEGER
}
wfDot1qTagCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
create(1),
delete(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Creation and deletion flag for this record. When set to 2
it will cause this entry to be deleted from the MIB"
DEFVAL { create }
::= { wfDot1qTagConfigEntry 1 }
wfDot1qTagCfgDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable parameter. A disabled interface will
never be selected as the active interface for a circuit."
DEFVAL { enabled }
::= { wfDot1qTagConfigEntry 2 }
wfDot1qTagCfgVlanName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name for the VLAN circuit.
NOTE: For SM purposes only. This a dummy cfg. parameter."
::= { wfDot1qTagConfigEntry 3 }
wfDot1qTagCfgLocalVlanId OBJECT-TYPE
SYNTAX INTEGER(1..1023)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the circuit on which Dot1qTag related
attributes are set. Uniquely identifies the group
within a Box. Here it is same as the Circuit Number."
::= { wfDot1qTagConfigEntry 4 }
wfDot1qTagCfgGlobalVlanId OBJECT-TYPE
SYNTAX INTEGER(1..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Uniquely identifies the group within the enterprise.
Global VLAN ID is a 12 bit unique number."
::= { wfDot1qTagConfigEntry 5 }
wfDot1qTagCfgVirtualPortType OBJECT-TYPE
SYNTAX INTEGER {
tagged(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Virtual Port Type."
DEFVAL { tagged }
::= { wfDot1qTagConfigEntry 6 }
wfDot1qTagCfgPhysicalPortId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical port id which is same as the line number."
::= { wfDot1qTagConfigEntry 7 }
wfDot1qTagCfgProtocolType OBJECT-TYPE
SYNTAX INTEGER(1514..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IEEE802.1q protocol type value.
NOTE: With the initial release of the software, the
Tag Protocol Identifier (TPID) field in 802.1 tag will
contain Bay Networks' propietary value of 8100 (Hex).
This value will be specified by the IEEE in the
forthcoming revisions of the 802.1Q standard, Bay
Networks will support the standard value."
DEFVAL { 33024 }
::= { wfDot1qTagConfigEntry 8 }
END -- Wellfleet-DOT1QTAG-CONFIG-MIB