librenms/mibs/NORTEL-NETWORKS-MULTIPLE-SPANNING-TREE-MIB
Adam Amstrong 7445a736a6 move nortel mibs to root
git-svn-id: http://www.observium.org/svn/observer/trunk@1576 61d68cd4-352d-0410-923a-c4978735b2b8
2010-07-31 16:07:50 +00:00

1577 lines
51 KiB
Plaintext

NORTEL-NETWORKS-MULTIPLE-SPANNING-TREE-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE,
Integer32, Counter32, TimeTicks
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, RowStatus, MacAddress
FROM SNMPv2-TC
BridgeId, Timeout
FROM BRIDGE-MIB
VlanId
FROM Q-BRIDGE-MIB
bayStackMibs
FROM SYNOPTICS-ROOT-MIB;
nnMultipleSpanningTreeMib MODULE-IDENTITY
LAST-UPDATED "200604100000Z"
ORGANIZATION "Nortel Networks"
CONTACT-INFO "Nortel Networks"
DESCRIPTION
"Nortel Networks Multiple Spanning-Tree MIB
Copyright 2003 Nortel Networks, Inc.
All rights reserved.
This Nortel Networks SNMP Management Information Base
Specification embodies Nortel Networks' confidential and
proprietary intellectual property. Nortel Networks retains all
title and ownership in the Specification, including any
revisions.
This Specification is supplied 'AS IS,' and Nortel Networks
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification."
REVISION "200604100000Z" -- 10 Apr 2006
DESCRIPTION "v002: Expanded the range for nnMstMaxHopCount"
REVISION "200402240000Z" -- 24 Feb 2004
DESCRIPTION "v001: Initial version."
::= { bayStackMibs 5 }
nnMstNotifications OBJECT IDENTIFIER ::= { nnMultipleSpanningTreeMib 0 }
nnMstObjects OBJECT IDENTIFIER ::= { nnMultipleSpanningTreeMib 1 }
nnMstScalars OBJECT IDENTIFIER ::= { nnMstObjects 1 }
nnMstNoOfInstancesSupported OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates Maximum number of spanning tree Instances supported."
::= { nnMstScalars 1 }
nnMstMaxHopCount OBJECT-TYPE
SYNTAX Integer32 (100..4000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Maximum Hop Count value.
The granularity of this timer is specified
to be 1 second. An agent may return a badValue
error if a set is attempted to a value which is
not a whole number of seconds."
DEFVAL { 2000 }
::= { nnMstScalars 2 }
nnMstBrgAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only required to be unique.
When concatenated with nnMstCistBridgePriority or
nnMstBridgePriority a unique BridgeIdentifier
is formed which is used in the Spanning Tree Protocol."
::= { nnMstScalars 3 }
nnMstCistRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { nnMstScalars 4 }
nnMstCistRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the Multiple
spanning tree region as determined by the Spanning Tree
Protocol as executed by this node. This value is used as
the CIST Regional Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { nnMstScalars 5 }
nnMstCistRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the CIST Root as seen
from this bridge."
::= { nnMstScalars 6 }
nnMstCistRegionalRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the CIST Regional Root
as seen from this bridge."
::= { nnMstScalars 7 }
nnMstCistRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the Port which offers the lowest
path cost from this bridge to the CIST Root Bridge."
::= { nnMstScalars 8 }
nnMstCistBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Value of the writable portion of the Bridge
Identifier comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { nnMstScalars 9 }
nnMstCistBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout (600..4000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for MaxAge when
this bridge is acting as the root. The granularity
of this timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
DEFVAL {2000}
::= { nnMstScalars 10 }
nnMstCistBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout (400..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D specifies that the range for this
parameter is related to the value of
BridgeMaxAge. The granularity of this
timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
DEFVAL {1500}
::= { nnMstScalars 11 }
nnMstCistHoldTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
::= { nnMstScalars 12 }
nnMstCistMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using."
::= { nnMstScalars 13 }
nnMstCistForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in a particular state before moving to the
next state."
::= { nnMstScalars 14 }
nnMstMstpUpCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times MSTP Module has been enabled.
A Trap is generated on the occurence of this event."
::= { nnMstScalars 15 }
nnMstMstpDownCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times MSTP Module has been disabled.
A Trap is generated on the occurence of this event."
::= { nnMstScalars 16 }
nnMstPathCostDefaultType OBJECT-TYPE
SYNTAX INTEGER {
stp8021d1998(1),
stp8021t2001(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of the Spanning Tree default Path Costs that
are to be used by this Bridge. A value of 8021d1998(1)
uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998.
A value of stp8021t2001(2) uses the 32-bit default Path
Costs from IEEE Std. 802.1t."
::= { nnMstScalars 17 }
nnMstForceProtocolVersion OBJECT-TYPE
SYNTAX INTEGER {
stpCompatible(0),
rstp(2),
mstp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocol the bridge is
currently running. The value 'stpCompatible(0)'
indicates the Spanning Tree Protocol specified in
IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning
Tree Protocol specified in IEEE 802.1w and 'mstp(3)'
indicates the Multiple Spanning Tree Protocol Specified
in IEEE 802.1s."
DEFVAL { mstp }
::= { nnMstScalars 18 }
nnMstTxHoldCount OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate."
DEFVAL { 3 }
::= { nnMstScalars 19 }
nnMstConfigIdSel OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Configuration Identifier Format Selector used
by the Bridge. This has a fixed value of 0 to indicate
RegionName, RegionVersion are specified as in Standard."
::= { nnMstScalars 20 }
nnMstRegionName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name for the Region's configuration. By Default
Region Name will be equal to the Bridge Mac Address."
::= { nnMstScalars 21 }
nnMstRegionVersion OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Version of the MST Region."
::= { nnMstScalars 22 }
nnMstConfigDigest OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Configuration Digest value for this Region, this is an
MD5 digest value, and hence must always be 16 octets long."
::= { nnMstScalars 23 }
nnMstRegionConfigChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a Region Configuration Identifier Change
was detected.
A Trap is generated on the occurence of this event."
::= { nnMstScalars 24 }
nnMstCistBridgeRoleSelectionSemState OBJECT-TYPE
SYNTAX INTEGER {
initbridge (0),
roleselection (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Role Selection State Machine
of this bridge in Common Spanning Tree context"
::= { nnMstScalars 25 }
nnMstCistTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the
TcWhile Timer for any port in this Bridge was
non-zero for Common Spanning Tree context."
::= { nnMstScalars 26 }
nnMstCistTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for Common
Spanning Tree context."
::= { nnMstScalars 27 }
nnMstCistNewRootBridgeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this Bridge has detected a Root
Bridge change for Common Spanning Tree context.
A Trap is generated on the occurence of this event."
::= { nnMstScalars 28 }
-- -----------------------------------------------------------------
--
-- nnMstBridgeTable, table of bridge/spanning-tree instances
--
-- -----------------------------------------------------------------
nnMstBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF NnMstBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing Bridge Information specific to Spanning
Tree Instance."
::= { nnMstObjects 2 }
nnMstBridgeEntry OBJECT-TYPE
SYNTAX NnMstBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the Bridge Information."
INDEX { nnMstBridgeInstance }
::= { nnMstBridgeTable 1 }
NnMstBridgeEntry ::=
SEQUENCE {
nnMstBridgeInstance Integer32,
nnMstBridgeRegionalRoot BridgeId,
nnMstBridgePriority Integer32,
nnMstBridgeRootCost Integer32,
nnMstBridgeRootPort Integer32,
nnMstBridgeTimeSinceTopologyChange TimeTicks,
nnMstBridgeTopChanges Counter32,
nnMstBridgeNewRootCount Counter32,
nnMstBridgeRoleSelectionSemState INTEGER,
nnMstBridgeInstanceUpCount Counter32,
nnMstBridgeInstanceDownCount Counter32,
nnMstBridgeOldDesignatedRoot BridgeId,
nnMstBridgeEnabled TruthValue,
nnMstBridgeRowStatus RowStatus
}
nnMstBridgeInstance OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Spanning Tree Instance to which the information belongs."
::= { nnMstBridgeEntry 1 }
nnMstBridgeRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MSTI Regional Root Identifier value for the Instance. This value
is used as the MSTI Regional Root Identifier parameter in all
Configuration Bridge PDUs originated by this node"
::= { nnMstBridgeEntry 2 }
nnMstBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The writable portion of the MSTI Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { nnMstBridgeEntry 3 }
nnMstBridgeRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the MSTI Regional Root as seen
by this bridge."
::= { nnMstBridgeEntry 4 }
nnMstBridgeRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the Port which offers the lowest
path cost from this bridge to the MSTI Region Root Bridge."
::= { nnMstBridgeEntry 5 }
nnMstBridgeTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the
TcWhile Timer for any port in this Bridge was
non-zero for this spanning tree instance."
::= { nnMstBridgeEntry 6 }
nnMstBridgeTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for this
spanning tree instance."
::= { nnMstBridgeEntry 7 }
nnMstBridgeNewRootCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this Bridge has detected a Root
Bridge change for this spanning tree instance.
A Trap is generated on the occurence of this event."
::= { nnMstBridgeEntry 8 }
nnMstBridgeRoleSelectionSemState OBJECT-TYPE
SYNTAX INTEGER {
initbridge (0),
roleselection (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Role Selection State Machine
for this spanning tree instance for this bridge."
::= { nnMstBridgeEntry 9 }
nnMstBridgeInstanceUpCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a new spanning tree instance has
been created.
A Trap is generated on the occurence of this event."
::= { nnMstBridgeEntry 10 }
nnMstBridgeInstanceDownCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a spanning tree instance has
been deleted.
A Trap is generated on the occurence of this event."
::= { nnMstBridgeEntry 11 }
nnMstBridgeOldDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the old root of the spanning
tree instance as determined by the Spanning Tree Protocol
as executed by this node. "
::= { nnMstBridgeEntry 12 }
nnMstBridgeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to control whether this bridge instance
is enabled or disabled."
::= { nnMstBridgeEntry 13 }
nnMstBridgeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to control row creation/deletion."
::= { nnMstBridgeEntry 14 }
-- -----------------------------------------------------------------
--
-- nnMstCistPortTable, contains per-port information that is common to
-- all bridge/spanning-tree instances
--
-- -----------------------------------------------------------------
nnMstCistPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF NnMstCistPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Common Spanning Tree Port
Information."
::= { nnMstObjects 3 }
nnMstCistPortEntry OBJECT-TYPE
SYNTAX NnMstCistPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port for
Common Spanning tree."
INDEX { nnMstCistPort }
::= { nnMstCistPortTable 1 }
NnMstCistPortEntry ::=
SEQUENCE {
nnMstCistPort Integer32,
nnMstCistPortPathCost Integer32,
nnMstCistPortPriority Integer32,
nnMstCistPortDesignatedRoot BridgeId,
nnMstCistPortDesignatedBridge BridgeId,
nnMstCistPortDesignatedPort OCTET STRING,
nnMstCistPortAdminP2P INTEGER,
nnMstCistPortOperP2P TruthValue,
nnMstCistPortAdminEdgeStatus TruthValue,
nnMstCistPortOperEdgeStatus TruthValue,
nnMstCistPortProtocolMigration TruthValue,
nnMstCistPortState INTEGER,
nnMstCistForcePortState INTEGER,
nnMstCistPortForwardTransitions Counter32,
nnMstCistPortRxMstBpduCount Counter32,
nnMstCistPortRxRstBpduCount Counter32,
nnMstCistPortRxConfigBpduCount Counter32,
nnMstCistPortRxTcnBpduCount Counter32,
nnMstCistPortTxMstBpduCount Counter32,
nnMstCistPortTxRstBpduCount Counter32,
nnMstCistPortTxConfigBpduCount Counter32,
nnMstCistPortTxTcnBpduCount Counter32,
nnMstCistPortInvalidMstBpduRxCount Counter32,
nnMstCistPortInvalidRstBpduRxCount Counter32,
nnMstCistPortInvalidConfigBpduRxCount Counter32,
nnMstCistPortInvalidTcnBpduRxCount Counter32,
nnMstCistPortTransmitSemState INTEGER,
nnMstCistPortReceiveSemState INTEGER,
nnMstCistPortProtMigrationSemState INTEGER,
nnMstCistProtocolMigrationCount Counter32,
nnMstCistPortDesignatedCost Integer32,
nnMstCistPortRegionalRoot BridgeId,
nnMstCistPortRegionalPathCost Integer32,
nnMstCistSelectedPortRole INTEGER,
nnMstCistCurrentPortRole INTEGER,
nnMstCistPortInfoSemState INTEGER,
nnMstCistPortRoleTransitionSemState INTEGER,
nnMstCistPortStateTransitionSemState INTEGER,
nnMstCistPortTopologyChangeSemState INTEGER,
nnMstCistPortHelloTime Timeout,
nnMstCistPortOperVersion INTEGER,
nnMstCistPortEffectivePortState TruthValue
}
nnMstCistPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { nnMstCistPortEntry 1 }
nnMstCistPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the CIST Root which include this port."
::= { nnMstCistPortEntry 2 }
nnMstCistPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
of the Spanning Tree instance can be modified by setting
the CistPortPriority value. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { nnMstCistPortEntry 3 }
nnMstCistPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge recorded as the
CIST Root in the configuration BPDUs transmitted."
::= { nnMstCistPortEntry 4 }
nnMstCistPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { nnMstCistPortEntry 5 }
nnMstCistPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier of the port on the Designated Bridge
for this port's segment."
::= { nnMstCistPortEntry 6 }
nnMstCistPortAdminP2P OBJECT-TYPE
SYNTAX INTEGER {
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means."
::= { nnMstCistPortEntry 7 }
nnMstCistPortOperP2P OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the nnMstCistPortAdminP2P object."
::= { nnMstCistPortEntry 8 }
nnMstCistPortAdminEdgeStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative value of the Edge Port parameter. A
value of TRUE(1) indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port should be assumed as a non-edge-port."
::= { nnMstCistPortEntry 9 }
nnMstCistPortOperEdgeStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the Edge Port parameter. The
object is initialized to the value of
nnMstCistPortAdminEdgeStatus and is set FALSE on reception
of a BPDU."
::= { nnMstCistPortEntry 10 }
nnMstCistPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Protocol migration state of this Port.
When operating in RSTP/MSTP (version >= 2) mode, writing
TRUE(1) to this object forces this port to transmit MSTP
BPDUs without instance information.
Any other operation on this object has no effect and
it always returns FALSE(2) when read."
::= { nnMstCistPortEntry 11 }
nnMstCistPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Common
spanning tree protocol."
::= { nnMstCistPortEntry 12 }
nnMstCistForcePortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current state of the Port which can be changed to either
Disabled or Enabled for the base spanning tree
instance."
::= { nnMstCistPortEntry 13 }
nnMstCistPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this port has transitioned to the
Forwarding State."
::= { nnMstCistPortEntry 14 }
nnMstCistPortRxMstBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MST BPDUs received on this port."
::= { nnMstCistPortEntry 15 }
nnMstCistPortRxRstBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RST BPDUs received on this port."
::= { nnMstCistPortEntry 16 }
nnMstCistPortRxConfigBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Configuration BPDUs received on this port."
::= { nnMstCistPortEntry 17 }
nnMstCistPortRxTcnBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDUs received on this port."
::= { nnMstCistPortEntry 18 }
nnMstCistPortTxMstBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MST BPDUs Transmitted from this port."
::= { nnMstCistPortEntry 19 }
nnMstCistPortTxRstBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RST BPDUs Transmitted from this port."
::= { nnMstCistPortEntry 20 }
nnMstCistPortTxConfigBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Configuration BPDUs Transmitted from this port."
::= { nnMstCistPortEntry 21 }
nnMstCistPortTxTcnBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDUs Transmitted from this port."
::= { nnMstCistPortEntry 22 }
nnMstCistPortInvalidMstBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid MST BPDUs Received on this port."
::= { nnMstCistPortEntry 23 }
nnMstCistPortInvalidRstBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid RST BPDUs Received on this port."
::= { nnMstCistPortEntry 24 }
nnMstCistPortInvalidConfigBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid Configuration BPDUs Received on this port."
::= { nnMstCistPortEntry 25 }
nnMstCistPortInvalidTcnBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid TCN BPDUs Received on this port."
::= { nnMstCistPortEntry 26 }
nnMstCistPortTransmitSemState OBJECT-TYPE
SYNTAX INTEGER {
transmitinit (0),
transmitperiodic (1),
transmitconfig (2),
transmittcn (3),
transmitrstp (4),
idle (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current State of the Port Transmit state machine."
::= { nnMstCistPortEntry 27 }
nnMstCistPortReceiveSemState OBJECT-TYPE
SYNTAX INTEGER {
discard (0),
receive (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current State of the Port Receive state machine."
::= { nnMstCistPortEntry 28 }
nnMstCistPortProtMigrationSemState OBJECT-TYPE
SYNTAX INTEGER {
init (0),
sendrstp (1),
sendingrstp (2),
sendstp (3),
sendingstp (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current State of the Port Protocol Migration
State machine."
::= { nnMstCistPortEntry 29 }
nnMstCistProtocolMigrationCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this Port has migrated from one STP protocol
version to another. The relevant protocols are STP-COMPATIBLE and
RSTP/MSTP.
A Trap is generated on the occurence of this event."
::= { nnMstCistPortEntry 30 }
nnMstCistPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port."
::= { nnMstCistPortEntry 31 }
nnMstCistPortRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge recorded as the
CIST Regional Root Identifier in the configuration BPDUs
transmitted."
::= { nnMstCistPortEntry 32 }
nnMstCistPortRegionalPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths
towards the CIST Regional Root which include this port."
::= { nnMstCistPortEntry 33 }
nnMstCistSelectedPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected Port Role of the port for this spanning
tree instance."
::= { nnMstCistPortEntry 34 }
nnMstCistCurrentPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Port Role of the port for this spanning
tree instance."
::= { nnMstCistPortEntry 35 }
nnMstCistPortInfoSemState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1),
aged (2),
update (3),
superiordesg (4),
repeatdesg (5),
root (6),
other (7),
present (8),
receive (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Information State Machine
for this port in this spanning tree context."
::= { nnMstCistPortEntry 36 }
nnMstCistPortRoleTransitionSemState OBJECT-TYPE
SYNTAX INTEGER {
init (0),
blockport (1),
blockedport (2),
activeport (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Role Transition State Machine
for this port in this spanning tree context."
::= { nnMstCistPortEntry 37 }
nnMstCistPortStateTransitionSemState OBJECT-TYPE
SYNTAX INTEGER {
discarding (0),
learning (1),
forwarding (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port State Transition State Machine
for this port in this spanning tree context."
::= { nnMstCistPortEntry 38 }
nnMstCistPortTopologyChangeSemState OBJECT-TYPE
SYNTAX INTEGER {
init (0),
inactive (1),
active (2),
detected (3),
notifiedtcn (4),
notifiedtc (5),
propagating (6),
acknowledged (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Topology Change State Machine
for this port in this spanning tree context."
::= { nnMstCistPortEntry 39 }
nnMstCistPortHelloTime OBJECT-TYPE
SYNTAX Timeout (100..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node on this port
in units of hundredths of a second."
::= { nnMstCistPortEntry 40 }
nnMstCistPortOperVersion OBJECT-TYPE
SYNTAX INTEGER {
stpCompatible(0),
rstp(2),
mstp(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates whether the Port is operationally in the Mstp
mode, Rstp mode or the Stp-compatible mode i.e., whether the
Port is transmitting MST BPDUs, RST BPDUs or Config/TCN BPDUs."
::= { nnMstCistPortEntry 41 }
nnMstCistPortEffectivePortState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The effective operational state of the port for CIST. This will
TRUE only when the port is operationally up in the Interface level
and Protocol level for CIST. This is will be set to False for all
other times."
::= { nnMstCistPortEntry 42 }
-- -----------------------------------------------------------------
--
-- nnMstPortBridgeTable, contains per-port information that is
-- specific to a bridge/spanning-tree instance
--
-- -----------------------------------------------------------------
nnMstPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF NnMstPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Spanning Tree Instance Specific Port
Information."
::= { nnMstObjects 4 }
nnMstPortEntry OBJECT-TYPE
SYNTAX NnMstPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port for each
and every spanning tree instance."
INDEX { nnMstPort, nnMstBridgeInstance }
::= { nnMstPortTable 1 }
NnMstPortEntry ::=
SEQUENCE {
nnMstPort Integer32,
nnMstPortPathCost Integer32,
nnMstPortPriority Integer32,
nnMstPortDesignatedRoot BridgeId,
nnMstPortDesignatedBridge BridgeId,
nnMstPortDesignatedPort OCTET STRING,
nnMstPortState INTEGER,
nnMstPortForcePortState INTEGER,
nnMstPortForwardTransitions Counter32,
nnMstPortReceivedBPDUs Counter32,
nnMstPortTransmittedBPDUs Counter32,
nnMstPortInvalidBPDUsRcvd Counter32,
nnMstPortDesignatedCost Integer32,
nnMstPortSelectedPortRole INTEGER,
nnMstPortCurrentPortRole INTEGER,
nnMstPortInfoSemState INTEGER,
nnMstPortRoleTransitionSemState INTEGER,
nnMstPortStateTransitionSemState INTEGER,
nnMstPortTopologyChangeSemState INTEGER,
nnMstPortEffectivePortState TruthValue
}
nnMstPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { nnMstPortEntry 1 }
nnMstPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { nnMstPortEntry 2 }
nnMstPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { nnMstPortEntry 3 }
nnMstPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge recorded as the
MSTI Regional Root in the configuration BPDUs transmitted."
::= { nnMstPortEntry 4 }
nnMstPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { nnMstPortEntry 5 }
nnMstPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier of the port on the Designated Bridge
for this port's segment."
::= { nnMstPortEntry 6 }
nnMstPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Multiple
spanning tree protocol. Port which is Forwarding state
in one instance can be in Discarding (Blocking) state
in another instance."
::= { nnMstPortEntry 7 }
nnMstPortForcePortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current state of the Port which can be changed to either
Disabled or Enabled for the specific spanning tree
instance."
::= { nnMstPortEntry 8 }
nnMstPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this port has transitioned to the
Forwarding State for specific instance."
::= { nnMstPortEntry 9 }
nnMstPortReceivedBPDUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of BPDUs received by this port for this
spanning tree instance."
::= { nnMstPortEntry 10 }
nnMstPortTransmittedBPDUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of BPDUs transmitted on this port for
this spanning tree instance."
::= { nnMstPortEntry 11 }
nnMstPortInvalidBPDUsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid BPDUs received on this Port
for this spanning tree instance."
::= { nnMstPortEntry 12 }
nnMstPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port."
::= { nnMstPortEntry 13 }
nnMstPortSelectedPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4),
master(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected Port Role of the port for this spanning
tree instance."
::= { nnMstPortEntry 14 }
nnMstPortCurrentPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4),
master(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Port Role of the port for this spanning
tree instance."
::= { nnMstPortEntry 15 }
nnMstPortInfoSemState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1),
aged (2),
update (3),
superiordesg (4),
repeatdesg (5),
root (6),
other (7),
present (8),
receive (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Information State Machine
for this port in this spanning tree context."
::= { nnMstPortEntry 16 }
nnMstPortRoleTransitionSemState OBJECT-TYPE
SYNTAX INTEGER {
init (0),
blockport (1),
blockedport (2),
activeport (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Role Transition State Machine
for this port in this spanning tree context."
::= { nnMstPortEntry 17 }
nnMstPortStateTransitionSemState OBJECT-TYPE
SYNTAX INTEGER {
discarding (0),
learning (1),
forwarding (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port State Transition State Machine
for this port in this spanning tree context."
::= { nnMstPortEntry 18 }
nnMstPortTopologyChangeSemState OBJECT-TYPE
SYNTAX INTEGER {
init (0),
inactive (1),
active (2),
detected (3),
notifiedtcn (4),
notifiedtc (5),
propagating (6),
acknowledged (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Topology Change State Machine
for this port in this spanning tree context."
::= { nnMstPortEntry 19 }
nnMstPortEffectivePortState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The effective operational stae of the port for specific instance.
This is will be TRUE only when the port is operationally up in the
interface level and Protocol level for the specific instance.
This is will be set to false at all other times."
::= { nnMstPortEntry 20 }
-- -----------------------------------------------------------------
--
-- Notification control objects
--
-- -----------------------------------------------------------------
nnMstNotificationControl OBJECT IDENTIFIER ::= { nnMstObjects 5 }
nnMstNotificationControlScalars OBJECT IDENTIFIER
::= { nnMstNotificationControl 1 }
nnMstSetNotifications OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable and disable specific
MSTP traps. Currently the following are defined
0 - Notifications are not enabled.
1 - General Notifications like protocol up or down
2 - Exception Notifications like memory failure or buffer failure
or port protocol migration or invalid packet rcvd in port
3 - All the above Notifications "
::= { nnMstNotificationControlScalars 1 }
nnMstGenNotificationType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The general events like
none - none of the below values
up - protocol UP,
down - protocol DOWN"
::= { nnMstNotificationControlScalars 2 }
nnMstErrNotificationType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
memfail (1),
bufffail (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error event like
none - none of the below values
memfail - memory allocation failure
bufffail - buffer allocation failure"
::= { nnMstNotificationControlScalars 3 }
nnMstPortNotificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF NnMstPortNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to store the notification information
occured in each of the port for protocol migration and
invalid packet received"
::= { nnMstNotificationControl 2 }
nnMstPortNotificationEntry OBJECT-TYPE
SYNTAX NnMstPortNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This entry is used to store the notification information"
INDEX { nnMstPortNotificationIndex}
::= { nnMstPortNotificationTable 1 }
NnMstPortNotificationEntry ::=
SEQUENCE {
nnMstPortNotificationIndex Integer32,
nnMstPortNotificationMigrationType INTEGER,
nnMstPortNotificationPktErrType INTEGER,
nnMstPortNotificationPktErrVal Integer32
}
nnMstPortNotificationIndex OBJECT-TYPE
SYNTAX Integer32 (1..4096)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, indicating the Port number."
::= { nnMstPortNotificationEntry 1 }
nnMstPortNotificationMigrationType OBJECT-TYPE
SYNTAX INTEGER {
sendstp (0),
sendrstp (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Protocol migration type occured in the port"
::= { nnMstPortNotificationEntry 2 }
nnMstPortNotificationPktErrType OBJECT-TYPE
SYNTAX INTEGER {
protocolIdErr(0),
invalidBpdu(1),
configLengthErr(2),
tcnLengthErr(3),
rstpLengthErr(4),
maxAgeErr(5),
fwdDelayErr(6),
helloTimeErr(7),
mstpLengthErr(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of invalid packet received in each of the port "
::= { nnMstPortNotificationEntry 3 }
nnMstPortNotificationPktErrVal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet error value corresponding to the above type "
::= { nnMstPortNotificationEntry 4 }
--
-- Notifications
--
nnMstGeneralEvent NOTIFICATION-TYPE
OBJECTS {
nnMstBrgAddress,
nnMstGenNotificationType
}
STATUS current
DESCRIPTION
"Generated when any of the general events like protocol up or
protocol down occurs"
::= { nnMstNotifications 1 }
nnMstErrorEvent NOTIFICATION-TYPE
OBJECTS {
nnMstBrgAddress,
nnMstErrNotificationType
}
STATUS current
DESCRIPTION
"Generated when any of the error events like memory failure or buffer failure
or protocol migration or new root or topology change occurs "
::= { nnMstNotifications 2 }
nnMstNewRoot NOTIFICATION-TYPE
OBJECTS {
nnMstBrgAddress,
nnMstBridgeOldDesignatedRoot,
nnMstBridgeRegionalRoot
}
STATUS current
DESCRIPTION
"Generated whenever a new root bridge is selected in the topology "
::= { nnMstNotifications 3 }
nnMstTopologyChange NOTIFICATION-TYPE
OBJECTS {
nnMstBrgAddress
}
STATUS current
DESCRIPTION
"Generated when topology change is detected "
::= { nnMstNotifications 4 }
nnMstProtocolMigration NOTIFICATION-TYPE
OBJECTS {
nnMstBrgAddress,
nnMstForceProtocolVersion,
nnMstPortNotificationMigrationType
}
STATUS current
DESCRIPTION
"Generated when port protocol migration happens in the port "
::= { nnMstNotifications 5 }
nnMstRegionConfigChange NOTIFICATION-TYPE
OBJECTS {
nnMstBrgAddress,
nnMstConfigIdSel,
nnMstRegionName,
nnMstRegionVersion,
nnMstConfigDigest
}
STATUS current
DESCRIPTION
"Generated when the MST region's configuration
identifier changes."
::= { nnMstNotifications 6 }
END