mirror of
https://github.com/librenms/librenms.git
synced 2024-09-22 10:58:42 +00:00
7445a736a6
git-svn-id: http://www.observium.org/svn/observer/trunk@1576 61d68cd4-352d-0410-923a-c4978735b2b8
425 lines
13 KiB
Plaintext
425 lines
13 KiB
Plaintext
-- SECTION 1: Top Level Definitions
|
|
|
|
CENTILLION-MCAST-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- Centillion VLAN MIB Release 2.0.1
|
|
-- Revision 05/05/98
|
|
|
|
-- Copyright 1998 Bay Networks, Inc.
|
|
-- All rights reserved.
|
|
-- This Bay Networks SNMP Management Information Base Specification
|
|
-- (Specification) embodies Bay Networks' confidential and
|
|
-- proprietary intellectual property. Bay Networks retains all
|
|
-- title and ownership in the Specification, including any
|
|
-- revisions.
|
|
|
|
-- This Specification is supplied "AS IS," and Bay Networks makes
|
|
-- no warranty, either express or implied, as to the use,
|
|
-- operation, condition, or performance of the Specification.
|
|
|
|
|
|
-- Imports
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE FROM RFC-1212
|
|
IpAddress FROM RFC1155-SMI
|
|
Boolean, EnableIndicator, StatusIndicator,
|
|
PortId, CardId, sysConfig FROM CENTILLION-ROOT-MIB;
|
|
|
|
-- Textual Conventions
|
|
|
|
--
|
|
-- C100/BH switches support Virtual LAN,
|
|
-- which are identified by a unique VLAN identifier
|
|
-- as specified by this textual convention.
|
|
-- This VLAN identifier corresponds to the lower 12
|
|
-- bits in the IEEE VLAN field:
|
|
|
|
VlanId ::= INTEGER (1..4095)
|
|
|
|
-- Groups
|
|
|
|
vlan OBJECT IDENTIFIER ::= { sysConfig 31 }
|
|
|
|
|
|
-- SECTION 2: VLAN Multicast configuration/information table
|
|
|
|
vlanMcastProtocolGroup OBJECT IDENTIFIER ::= { vlan 1 }
|
|
|
|
-- SECTION 3: VLAN IGMP Protocol Group
|
|
|
|
vlanIGMPProtocolGroup OBJECT IDENTIFIER ::= { vlanMcastProtocolGroup 1 }
|
|
|
|
-- SECTION 4: VLAN igmp configuration table
|
|
|
|
vlanIGMPConfig OBJECT IDENTIFIER ::= { vlanIGMPProtocolGroup 1 }
|
|
|
|
-- SECTION 5: IGMP configuration table
|
|
|
|
igmpGeneralConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpGeneralConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP IGMP general configuration table which includes
|
|
pseudo query, IRAP query configuration, and maximum
|
|
number of groups supported in this VLAN."
|
|
::= { vlanIGMPConfig 1 }
|
|
|
|
igmpGeneralConfigEntry OBJECT-TYPE
|
|
SYNTAX IgmpGeneralConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP IGMP general configuration entry.
|
|
Each entry is indexed by a vlan id.
|
|
An example to create the entry is:
|
|
set igmpGeneralConfigIgmpSupport.3=I2 and
|
|
igmpGeneralConfigMaxGroup.3=I20 to
|
|
a switch ip address.
|
|
(where 3 is vlan Id; 2 is enabled; 20 is maximum
|
|
multicast groups to be supported for this vlan. "
|
|
INDEX { igmpGeneralConfigVlanId }
|
|
::= { igmpGeneralConfigTable 1 }
|
|
|
|
|
|
IgmpGeneralConfigEntry ::= SEQUENCE {
|
|
igmpGeneralConfigVlanId
|
|
VlanId,
|
|
igmpGeneralConfigPseudoQuery
|
|
EnableIndicator,
|
|
igmpGeneralConfigIrapQuery
|
|
EnableIndicator,
|
|
igmpGeneralConfigIgmpSupport
|
|
EnableIndicator,
|
|
igmpGeneralConfigMaxGroup
|
|
INTEGER
|
|
}
|
|
|
|
igmpGeneralConfigVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique VLAN identifier of this IGMP configuration
|
|
entry. "
|
|
::= { igmpGeneralConfigEntry 1 }
|
|
|
|
igmpGeneralConfigPseudoQuery OBJECT-TYPE
|
|
SYNTAX EnableIndicator
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"In the absence of a true IGMP router, the switch may be
|
|
configured to issue general queries. This provides the
|
|
capability for multicast pruning with an isoloated subnet.
|
|
The mode defaults to disabled in a VLAN configured for
|
|
IGMP support"
|
|
::= { igmpGeneralConfigEntry 2 }
|
|
|
|
igmpGeneralConfigIrapQuery OBJECT-TYPE
|
|
SYNTAX EnableIndicator
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Control whether IGMP Router Advertisement Protocol
|
|
messages will be used to determine the existence of
|
|
a router in a remote switch. Default is 'enabled'."
|
|
::= { igmpGeneralConfigEntry 3 }
|
|
|
|
igmpGeneralConfigIgmpSupport OBJECT-TYPE
|
|
SYNTAX EnableIndicator
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" When 'enabled' is specified, it indicates that the IGMP
|
|
is supported in this VLAN."
|
|
|
|
|
|
::= { igmpGeneralConfigEntry 4 }
|
|
|
|
igmpGeneralConfigMaxGroup OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The maximum number of multicast groups supported in
|
|
this VLAN. If the VLAN supports only manually
|
|
configured multicast groups, then the value of this
|
|
field equals the length of the IGMP multicast group
|
|
if the multicast group is an inclusive set.
|
|
A value of 0 indicates that IGMP multicasting is not
|
|
supported in this VLAN"
|
|
::= { igmpGeneralConfigEntry 5 }
|
|
|
|
|
|
igmpTimerConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpTimerConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP IGMP Multicast timer configuration table"
|
|
::= { vlanIGMPConfig 2 }
|
|
|
|
igmpTimerConfigEntry OBJECT-TYPE
|
|
SYNTAX IgmpTimerConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP IGMP Multicast timer configuration entry.
|
|
Each entry is indexed by a vlan id. This entry will
|
|
be created when the corresponding igmpGeneralConfigEntry
|
|
is created. All the values of the mibs in this entry
|
|
will be set to default at the time of creation. "
|
|
INDEX { igmpTimerConfigVlanId }
|
|
::= { igmpTimerConfigTable 1 }
|
|
|
|
|
|
IgmpTimerConfigEntry ::= SEQUENCE {
|
|
igmpTimerConfigVlanId
|
|
VlanId,
|
|
igmpTimerConfigTimerRobustness
|
|
INTEGER,
|
|
igmpTimerConfigQueryInterval
|
|
INTEGER,
|
|
igmpTimerConfigQueryResponse
|
|
INTEGER
|
|
}
|
|
|
|
igmpTimerConfigVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique VLAN identifier of this multicast timer
|
|
configuration entry."
|
|
::= { igmpTimerConfigEntry 1 }
|
|
|
|
|
|
igmpTimerConfigTimerRobustness OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The robustness variable for the multicast group.
|
|
A value of zero indicates the default value should
|
|
be taken. If the value specified is non-zero, it should
|
|
be equal or greater than 2"
|
|
DEFVAL { 2 }
|
|
::= { igmpTimerConfigEntry 2 }
|
|
|
|
igmpTimerConfigQueryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The query interval configured for the multicast group.
|
|
A value of zero indicates the default value should be
|
|
used. The value should be less than 0xffff"
|
|
DEFVAL { 125 }
|
|
::= { igmpTimerConfigEntry 3 }
|
|
|
|
igmpTimerConfigQueryResponse OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The response interval configured for the multicast group.
|
|
A value of zero indicates the default value should be used.
|
|
The value should be less than 0xffff. "
|
|
DEFVAL { 100 }
|
|
::= { igmpTimerConfigEntry 4 }
|
|
|
|
|
|
--
|
|
-- The multicast group address table
|
|
--
|
|
|
|
igmpGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpGroupEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP IGMP Multicast group address configuration table. "
|
|
::= { vlanIGMPConfig 3 }
|
|
|
|
igmpGroupEntry OBJECT-TYPE
|
|
SYNTAX IgmpGroupEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP IGMP Multicast group configuration entry.
|
|
Each entry is indexed by igmpGroupVlanId,
|
|
igmpGroupStatic, and igmpGroupAddress"
|
|
INDEX { igmpGroupVlanId, igmpGroupStatic, igmpGroupAddress}
|
|
::= { igmpGroupTable 1 }
|
|
|
|
IgmpGroupEntry ::= SEQUENCE {
|
|
igmpGroupVlanId
|
|
VlanId,
|
|
igmpGroupStatic
|
|
Boolean,
|
|
igmpGroupAddress
|
|
IpAddress,
|
|
igmpGroupIncluded
|
|
INTEGER,
|
|
igmpGroupStatus
|
|
StatusIndicator
|
|
}
|
|
|
|
igmpGroupVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique VLAN identifier of this IGMP multicast group
|
|
address entry. "
|
|
::= { igmpGroupEntry 1 }
|
|
|
|
igmpGroupStatic OBJECT-TYPE
|
|
SYNTAX Boolean
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" Indicates whether the IGMP multicast group was created
|
|
statically(TRUE) by a management entity, or dynamically
|
|
learned"
|
|
::= { igmpGroupEntry 2 }
|
|
|
|
igmpGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The multicast group address(Class D). The range is from
|
|
224.0.0.0 to 239.255.255.255. The addresses from
|
|
224.0.0.0 to 224.0.0.255 are reserved IP multicast addresses."
|
|
::= { igmpGroupEntry 3 }
|
|
|
|
igmpGroupIncluded OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
included(1),
|
|
excluded(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the multicast addresses are to be included or
|
|
excluded from the group. Dynamic entries are always included
|
|
and can not be modified, while static entries may be
|
|
either included or excluded. For each VLAN, it only
|
|
allows to configure either 'included' as static or
|
|
'excluded' as static. "
|
|
::= { igmpGroupEntry 4 }
|
|
|
|
igmpGroupStatus OBJECT-TYPE
|
|
SYNTAX StatusIndicator
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of this multicast group entry: 'valid' and
|
|
'invalid'. This object enables the user to add or delete
|
|
this multicast group. Setting the status as 'valid' is to
|
|
add the entry; otherwise as 'invalid' is to delete the
|
|
entry.
|
|
An example to create an multicast group entry is:
|
|
set igmpGroupStatus.3.1.224.0.0.1= valid
|
|
where 3: vlan id; 1: static; 224.0.0.1: multicast group IP
|
|
address"
|
|
::= { igmpGroupEntry 5 }
|
|
|
|
--
|
|
-- The multicast router port table
|
|
--
|
|
|
|
igmpRouterPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpRouterPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP IGMP Multicast router port table. It contains a list of
|
|
the ports containing configured IGMP routers. These
|
|
ports initialize the IPrDtag and IPmDtag for the group."
|
|
::= { vlanIGMPConfig 4 }
|
|
|
|
igmpRouterPortEntry OBJECT-TYPE
|
|
SYNTAX IgmpRouterPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP IGMP Multicast router port entry. Each entry is
|
|
indexed by igmpRouterPortVlanId, igmpRouterPortStatic,
|
|
igmpRouterPortCard, igmpRouterPortPort"
|
|
INDEX { igmpRouterPortVlanId, igmpRouterPortStatic,
|
|
igmpRouterPortCard, igmpRouterPortPort}
|
|
::= { igmpRouterPortTable 1 }
|
|
|
|
IgmpRouterPortEntry ::= SEQUENCE {
|
|
igmpRouterPortVlanId
|
|
VlanId,
|
|
igmpRouterPortStatic
|
|
Boolean,
|
|
igmpRouterPortCard
|
|
CardId,
|
|
igmpRouterPortPort
|
|
PortId,
|
|
igmpRouterPortStatus
|
|
StatusIndicator
|
|
}
|
|
|
|
|
|
igmpRouterPortVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique VLAN identifier of this IGMP multicast
|
|
router port entry. "
|
|
::= { igmpRouterPortEntry 1 }
|
|
|
|
igmpRouterPortStatic OBJECT-TYPE
|
|
SYNTAX Boolean
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" Indicates whether the IGMP multicast router port was
|
|
created statically(TRUE) by a management entity, or
|
|
dynamically learned. "
|
|
::= { igmpRouterPortEntry 2 }
|
|
|
|
igmpRouterPortCard OBJECT-TYPE
|
|
SYNTAX CardId
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The card id of this multicast router port entry. "
|
|
::= { igmpRouterPortEntry 3 }
|
|
|
|
igmpRouterPortPort OBJECT-TYPE
|
|
SYNTAX PortId
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port id of this multicast router port entry. "
|
|
::= { igmpRouterPortEntry 4 }
|
|
|
|
igmpRouterPortStatus OBJECT-TYPE
|
|
SYNTAX StatusIndicator
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of this multicast router port entry: 'valid'
|
|
and 'invalid'. This object enables the user to add or
|
|
delete this multicast group. Setting the status as 'valid'
|
|
is to add the entry; otherwise as 'invalid' is to delete
|
|
the entry.
|
|
An example to create an multicast router port entry is:
|
|
set igmpRouterPortStatus.3.1.5.2 = valid
|
|
where 3: vlan id; 1: static; 5.2 : card/port that is
|
|
connected with igmp router"
|
|
::= { igmpRouterPortEntry 5 }
|
|
|
|
|
|
END
|
|
|