clones/librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-09-22 10:58:42 +00:00
Code Issues Packages Projects Releases Wiki Activity
89a76ef673
librenms/mibs/ENGENIUS-PRIVATE-MIB
Tom Laermans 42e4a448ca add engenius discovery and polling, missing image 
git-svn-id: http://www.observium.org/svn/observer/trunk@1762 61d68cd4-352d-0410-923a-c4978735b2b8
2010-12-16 10:26:36 +00:00

1461 lines
31 KiB
Plaintext
Raw Blame History

ENGENIUS-PRIVATE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, OBJECT-IDENTITY,
enterprises, IpAddress, Counter32, Gauge32, TimeTicks, Integer32,
Counter64
FROM SNMPv2-SMI
DisplayString, MacAddress, TruthValue, TimeStamp,
TimeInterval, DateAndTime, RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex
FROM RFC1213-MIB
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB;
engeniusprivate MODULE-IDENTITY
LAST-UPDATED "200906111100Z"
ORGANIZATION "Senao R&D Dept., S/W Division"
CONTACT-INFO
"
Info
SENAO INTERNATIONAL CO., LTD.
No.500, Fusing 3 Rd., Hwa-Ya Technical Park,
Kuei-Shan Hsiang, TAOYUAN County 333, TAIWAN, R.O.C.
Tel: 886-3-328-9289
Fax: 886-3-328-9666
E-mail: info@senao.com.tw
"
DESCRIPTION
"
The MIB module defines Senao implementation-specific metrics useful in managing
IEEE 802.11 on Senao devices.
This is used as a supplement to the standard 802.11 MIB proposed by IEEE.
"
REVISION "200906111100Z"
DESCRIPTION "Added new parameter: modelname,rf power, macadd, rssi"
REVISION "200906101600Z"
DESCRIPTION "Simplified version, remove unsupported item, added ipaddress type, added reboot cmd"
REVISION "200905141000Z"
DESCRIPTION "First version of Engenius-Private-MIB"
::= { engenius 2 }
engenius OBJECT IDENTIFIER ::= { enterprises 14125 }
status OBJECT IDENTIFIER ::= { engeniusprivate 1 }
configuration OBJECT IDENTIFIER ::= { engeniusprivate 2 }
command OBJECT IDENTIFIER ::= { engeniusprivate 3 }
system OBJECT IDENTIFIER ::= { status 1 }
wan OBJECT IDENTIFIER ::= { configuration 1 }
pppoe OBJECT IDENTIFIER ::= { configuration 2 }
dns OBJECT IDENTIFIER ::= { configuration 3 }
mtu OBJECT IDENTIFIER ::= { configuration 4 }
landhcp OBJECT IDENTIFIER ::= { configuration 5 }
ntp OBJECT IDENTIFIER ::= { configuration 6 }
admin OBJECT IDENTIFIER ::= { configuration 8 }
wlan OBJECT IDENTIFIER ::= { configuration 9 }
wlansta OBJECT IDENTIFIER ::= { configuration 10 }
wlanmesh OBJECT IDENTIFIER ::= { configuration 11 }
wlanstawds OBJECT IDENTIFIER ::= { configuration 14 }
stp OBJECT IDENTIFIER ::= { configuration 15 }
snmp OBJECT IDENTIFIER ::= { configuration 16 }
wmm OBJECT IDENTIFIER ::= { configuration 17 }
logemail OBJECT IDENTIFIER ::= { configuration 20 }
vpn OBJECT IDENTIFIER ::= { configuration 21 }
traffic OBJECT IDENTIFIER ::= { configuration 22 }
saveCmd OBJECT IDENTIFIER ::= { command 1 }
resetCmd OBJECT IDENTIFIER ::= { command 2 }
rebootCmd OBJECT IDENTIFIER ::= { command 3 }
-- ==========================
-- Defination Begins
-- ==========================
-- =======| status > system | ===============
systemName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DUT's system name."
DEFVAL { "Access Point" }
::= { system 1 }
sysPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The password that system manager own."
DEFVAL { "admin" }
::= { system 2 }
errMsg OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error message record"
::= { system 3 }
statusWLANSTAAssoc OBJECT-TYPE
SYNTAX INTEGER{
false(0),
true(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of wireless interface connect to AP"
DEFVAL { false }
::= { system 4 }
modelName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Firmware model name"
::= { system 5 }
wirelessMacAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The wireless MAC address"
::={ system 6 }
wanIPAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The WAN IP address"
::={ system 7 }
wanSubnetMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The WAN subnet mask"
::={ system 8 }
-- ============== END =======================
-- =======| configuration > wan | ===============
wanConnectionType OBJECT-TYPE
SYNTAX INTEGER
{
dhcp(1),
static(2),
pppoe(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The wan connection type which one of Static IP/DHCP/PPPoE/PPTP"
DEFVAL { static }
::= { wan 1 }
wanGeneralAccount OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DUT network Account ID"
DEFVAL { "none" }
::= { wan 2 }
wanGeneralDomain OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DUT network Domain Name"
DEFVAL { "none" }
::= { wan 3 }
wanGeneralIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DUT wan interface static IP address in static connection type"
DEFVAL { "10.1.1.100" }
::= { wan 4 }
wanGeneralSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DUT wan interface subnet mask in static connection type"
DEFVAL { "255.255.0.0" }
::= { wan 5 }
wanGeneralGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DUT networks gateway IP address in static connection type"
DEFVAL { "10.1.1.150" }
::= { wan 6 }
-- ============== END ===========================
-- =======| configuration > pppoe | ===============
wanPPPoELoginName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PPPoE user name"
::= { pppoe 1 }
wanPPPoEPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PPPoE password"
::= { pppoe 2 }
wanPPPoEServiceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the desired PPPoE service name"
::= { pppoe 3 }
wanPPPoEConnectionType OBJECT-TYPE
SYNTAX INTEGER
{
keepalive(0),
connectondemand(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PPPoE connection type which keep alive or on demand."
DEFVAL { keepalive }
::= { pppoe 4 }
wanPPPoEMaxIdleTime OBJECT-TYPE
SYNTAX Integer32 (1..99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max idle time (minutes) in connect on demand connection type"
DEFVAL { 1 }
::= { pppoe 5 }
wanPPPoERedialPeriod OBJECT-TYPE
SYNTAX Integer32 (30..180)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The redial period (seconds) in keep alive connection type"
DEFVAL { 30 }
::= { pppoe 6 }
-- ============== END ===========================
-- =======| configuration > dns | ===============
wanDNSSourc OBJECT-TYPE
SYNTAX INTEGER
{
isp(0),
specified(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Automatically gets DNS IP address from ISP or user sepcisicify"
DEFVAL { isp }
::= { dns 1 }
wanPrimaryDNSIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The primary DNS IP address"
DEFVAL { "0.0.0.0" }
::= { dns 2 }
wanSecondaryDNSIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The secondary DNS IP address"
DEFVAL { "0.0.0.0" }
::= { dns 3 }
-- ============== END ===========================
-- =======| configuration > mtu | ===============
wanMTUMode OBJECT-TYPE
SYNTAX INTEGER
{
auto(0),
manual(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Automatically setting MTU value or user sepcisicify"
DEFVAL { auto }
::= { mtu 1 }
wanMTU OBJECT-TYPE
SYNTAX Integer32 (576..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Maximum Transmission Unit (MTU) in WAN interface"
DEFVAL { 1500 }
::= { mtu 2 }
pppoeMTU OBJECT-TYPE
SYNTAX Integer32 (576..1492)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Maximum Transmission Unit (MTU) in PPPoE protocol"
DEFVAL { 1492 }
::= { mtu 3 }
-- ============== END ===========================
-- =======| configuration > landhcp | ===============
lanDHCPC OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Automatically get LAN IP address form DHCP server or set static IP address"
DEFVAL { disable }
::= { landhcp 1 }
lanIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To setting static LAN IP address in DUT"
DEFVAL { "192.168.1.1" }
::= { landhcp 2 }
lanSubnetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To setting static Subnet Mask in DUT"
DEFVAL { "255.255.255.0" }
::= { landhcp 3 }
lanGatewayIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To setting getway IP address in DUT"
DEFVAL { "0.0.0.0" }
::= { landhcp 4 }
lanWINSAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To setting WINS IP address in DUT"
DEFVAL { "0.0.0.0" }
::= { landhcp 5 }
lanDHCPSrvEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable DHCP server"
DEFVAL { enable }
::= { landhcp 6 }
lanDHCPSrvStartAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To setting DHCP server allocate IP address up bound"
DEFVAL { "192.168.1.2" }
::= { landhcp 7 }
lanDHCPSrvStopAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To setting DHCP server allocate IP address low bound"
DEFVAL { "192.168.1.254" }
::= { landhcp 8 }
-- ============== END ================================
-- =======| configuration > ntp | ===============
timeSettingMode OBJECT-TYPE
SYNTAX INTEGER
{
manual(0),
auto(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Automatically get or manually set Date and Time"
DEFVAL { auto }
::= { ntp 1 }
userNTPSrvMode OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable user sepcisicify NTP server"
DEFVAL { disable }
::= { ntp 2 }
userNTPSrvIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User sepcisicify NTP server IP address"
DEFVAL { "0.0.0.0" }
::= { ntp 3 }
timeZone OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To setting time zone in DUT"
DEFVAL { "GMT0" }
::= { ntp 4 }
-- ============== END ===========================
-- =======| configuration > admin | ===============
username OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..33))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The User Name that system manager own"
DEFVAL { "admin" }
::= { admin 1 }
remoteManagementEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable remote management DUT function"
DEFVAL { disable }
::= { admin 3 }
remoteUpgradeEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable remote upgrade firmware"
DEFVAL { disable }
::= { admin 4 }
remoteManagementPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To setting remote management port"
DEFVAL { 8080 }
::= { admin 5 }
remoteManagementVLANID OBJECT-TYPE
SYNTAX Integer32 (1..4096)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To setting management Tag on VLAN"
DEFVAL { 4096 }
::= { admin 6 }
-- ============== END ===========================
-- =======| configuration > wlan | ===============
wlanMode OBJECT-TYPE
SYNTAX INTEGER
{
wlan11a(1),
wlan11b(2),
wlan11bg(3),
wlan11astaticturbo(5),
wlan11gdynamicturbo(6),
wlan11gstaticturbo(7),
wlan11gpure(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The wireless lan operation mode. (802.11a/b/g)"
DEFVAL { wlan11bg }
::= { wlan 1 }
chanBwMode OBJECT-TYPE
SYNTAX INTEGER
{
wlan20MHz(0),
wlan10MHz(1),
wlan5MHz(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN narrow band"
DEFVAL { wlan20MHz }
::= { wlan 2 }
wlanaSSID OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..33))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SSID which station connect to"
DEFVAL { "EnGenius" }
::= { wlan 3 }
wlanOpMode OBJECT-TYPE
SYNTAX INTEGER
{
accesspoint(0),
clientbridge(1),
wdsbridge(2),
repeater(3),
aprouter(4),
clientrouter(5),
mesh(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN operation mode. (Access Point/ Client Bridge/ WDS Bridge/ Repeater/ AP Router / Client Router)"
DEFVAL { accesspoint }
::= { wlan 4 }
wlanCountryCode OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The country code"
DEFVAL { "0" }
::= { wlan 5 }
wlanCountry OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string of the country name"
DEFVAL { "N/A" }
::= { wlan 6 }
wlanChannel OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The wireless channel frequency"
DEFVAL { 1 }
::= { wlan 7 }
wlanACLMode OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
allow(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN Mac filter mode. (Disable / Deny / Allow)"
DEFVAL { disable }
::= { wlan 8 }
wlanOutdoorDistance OBJECT-TYPE
SYNTAX Integer32 (1000..30000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The distance between two DUTs"
DEFVAL { 1000 }
::= { wlan 9 }
wlanDataRate OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The wireless LAN Data rate. The available input option: 1M, 2M, 5.5M, 6M, 9M, 11M, 12M, 18M, 24M, 36M, 48M, 54M, auto"
DEFVAL { "auto" }
::= { wlan 10 }
wlanTxPower OBJECT-TYPE
SYNTAX Integer32 (0..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN transmission power"
DEFVAL { 20 }
::= { wlan 11 }
antennasel OBJECT-TYPE
SYNTAX INTEGER
{
diversity(0),
vertical(1),
horizontal(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The antenna which prefer to use"
::= { wlan 12 }
wlanBeaconInterval OBJECT-TYPE
SYNTAX Integer32 (25..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The sent beacon interval time"
DEFVAL { 100 }
::= { wlan 13 }
wlanRTSTh OBJECT-TYPE
SYNTAX Integer32 (1..2346)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN RTS/CTS threshold"
DEFVAL { 2346 }
::= { wlan 15 }
wlanFragLen OBJECT-TYPE
SYNTAX Integer32 (256..2346)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN packages fragment length"
DEFVAL { 2346 }
::= { wlan 16 }
wlanProtmode OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
ctsonly(1),
rtscts(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Protection transmittion on G band. (CTS or RTS/CTS)"
DEFVAL { disable }
::= { wlan 18 }
wlanPreferBSSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address of the prefer connection AP"
::= { wlan 19 }
wlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF WLANTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table display the wlan table."
::= { wlan 21 }
wlanTableEntry OBJECT-TYPE
SYNTAX WLANTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represent the entry in the wlan table."
INDEX { wlanTableIndex }
::= { wlanTable 1 }
WLANTableEntry::=
SEQUENCE
{
wlanTableIndex Integer32,
wlanEnable INTEGER,
wlanSSID DisplayString,
wlanHideSSID INTEGER,
wlanStaSeparation INTEGER,
wlanVLANID Integer32,
wlanAuth INTEGER,
wlanEncryption INTEGER,
wlanWepDefaultKeyIdx INTEGER,
wlanWepKey DisplayString,
wlanWpapskPassphrase DisplayString,
wlanWpaRadiusSrvIP IpAddress,
wlanWpaRadiusSrvPort Integer32,
wlanWpaRadiusSrvSecret DisplayString,
wlanWpaGroupKeyUpdateInterval Integer32
}
wlanTableIndex OBJECT-TYPE
SYNTAX Integer32 (0..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specify the index of the wlan table."
::= { wlanTableEntry 1 }
wlanEnable OBJECT-TYPE
SYNTAX INTEGER{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable"
::= { wlanTableEntry 2 }
wlanSSID OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN SSID"
::= { wlanTableEntry 3 }
wlanHideSSID OBJECT-TYPE
SYNTAX INTEGER{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable broadcast SSID"
::= { wlanTableEntry 4 }
wlanStaSeparation OBJECT-TYPE
SYNTAX INTEGER{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable STA separation"
::= { wlanTableEntry 5 }
wlanVLANID OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN interface VLAN ID"
::= { wlanTableEntry 6 }
wlanAuth OBJECT-TYPE
SYNTAX INTEGER{
open(1),
shared(2),
auto(3),
wlan8021x(4),
wpa(5),
wpapsk(6),
wpa2(7),
wpa2psk(8),
wpamixed(9),
wpapskmixed(10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN authentication type"
::= { wlanTableEntry 7 }
wlanEncryption OBJECT-TYPE
SYNTAX INTEGER{
none(0),
wep(1),
tkip(2),
aes(3),
auto(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN encryption type"
::= { wlanTableEntry 8 }
wlanWepDefaultKeyIdx OBJECT-TYPE
SYNTAX INTEGER{
key1(1),
key2(2),
key3(3),
key4(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN WEP Key index of combination"
::= { wlanTableEntry 9 }
wlanWepKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(5|10|13|16|26|32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN WEP Key combination. The input has to be 5,13,16 ascii keys, or 10,26,32 Hex keys "
::= { wlanTableEntry 10 }
wlanWpapskPassphrase OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN WPA Key combination"
::= { wlanTableEntry 11 }
wlanWpaRadiusSrvIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN WPA-Enterprise remote radius server IP"
::= { wlanTableEntry 12 }
wlanWpaRadiusSrvPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN WPA-Enterprise remote radius server port"
::= { wlanTableEntry 13 }
wlanWpaRadiusSrvSecret OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN WPA-Enterprise key combination"
::= { wlanTableEntry 14 }
wlanWpaGroupKeyUpdateInterval OBJECT-TYPE
SYNTAX Integer32 (30..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN WPA-Enterprise group key update interval"
::= { wlanTableEntry 15 }
-- ============== END ===========================
-- =======| configuration > wlansta | ===============
wlanSTAAuth OBJECT-TYPE
SYNTAX INTEGER
{
open(1),
shared(2),
wpapsk(6),
wpa2psk(8),
wpapskmixed(10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN STA authentication type"
DEFVAL { open }
::= { wlansta 1 }
wlanSTAEncryption OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
wep(1),
tkip(2),
aes(3),
auto(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN STA encryption type"
DEFVAL { none }
::= { wlansta 2 }
wlanSTAWepDefaultKeyIdx OBJECT-TYPE
SYNTAX INTEGER
{
key1(1),
key2(2),
key3(3),
key4(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN STA WEP Key index of combination"
DEFVAL { key1 }
::= { wlansta 3 }
wlanSTAWepKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(5|10|13|16|26|32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN STA WEP Key combination. The input has to be 5,13,16 ascii keys, or 10,26,32 Hex keys "
::= { wlansta 4 }
wlanSTAWpapskPassphrase OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN STA WPA Key combination"
::= { wlansta 5 }
-- ============== END ===========================
-- =======| configuration > wlanmesh | ===============
wlanMESHSSID OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..33))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string of the WLAN SSID in MESH mode"
DEFVAL { "EnGeniusMesh" }
::= { wlanmesh 1 }
wlanMESHGateway OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Gateway IP address in MESH mode"
::= { wlanmesh 2 }
wlanMESHAuth OBJECT-TYPE
SYNTAX INTEGER
{
open(1),
shared(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The authentication type in MESH mode"
DEFVAL { open }
::= { wlanmesh 4 }
wlanMESHEncryption OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
wep(1),
aes(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The encryption type in MESH mode"
DEFVAL { none }
::= { wlanmesh 5 }
wlanMESHWepDefaultKeyIdx OBJECT-TYPE
SYNTAX INTEGER
{
key1(1),
key2(2),
key3(3),
key4(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN WEP Key index of combination in MESH mode"
DEFVAL { key1 }
::= { wlanmesh 6 }
wlanMESHWepKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(5|10|13|16|26|32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN MESH WEP Key combination. The input has to be 5,13,16 ascii keys, or 10,26,32 Hex keys "
::= { wlanmesh 7 }
wlanMESHWpapskPassphrase OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN WPA Key combination in MESH mode"
::= { wlanmesh 8 }
-- ============== END ===========================
-- =======| configuration > wlanstawds | ===============
staWDS OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable WDS link in Client Mode"
DEFVAL { enable }
::= { wlanstawds 1 }
-- ============== END ====================================
-- =======| configuration > stp | ===============
stpMode OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable Spanning Tree"
DEFVAL { disable }
::= { stp 1 }
stpHelloTime OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval between periodic transmissions of Configuration Messages by Designated Ports. IEEE802.1D 17.13.6"
DEFVAL { 1 }
::= { stp 2 }
stpMaxAge OBJECT-TYPE
SYNTAX Integer32 (6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum age of the information transmitted by the Bridge when it is the Root Bridge. IEEE 802.1D 17.13.8"
DEFVAL { 20 }
::= { stp 3 }
stpForwardDelay OBJECT-TYPE
SYNTAX Integer32 (4..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The delay used by STP Bridges to transition Reoot and Designated Ports to Forwarding. IEEE 802.1D 17.13.5"
DEFVAL { 4 }
::= { stp 4 }
stpPriority OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The manageable component of the Port Identifier. IEEE 802.1D 17.13.10"
DEFVAL { 32768 }
::= { stp 5 }
-- ============== END ===========================
-- =======| configuration > snmp | ===============
snmpEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable SNMP agent"
DEFVAL { enable }
::= { snmp 1 }
snmpCmntyRO OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..33))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The communication string for Read Only"
DEFVAL { "public" }
::= { snmp 2 }
snmpCmntyRW OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..33))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The communication string for Read Write"
DEFVAL { "private" }
::= { snmp 3 }
snmpTrapDstIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address which snmp trap sent to"
DEFVAL { "0.0.0.0" }
::= { snmp 4 }
snmpTrapCmnty OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..33))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The communication string for trap message"
DEFVAL { "public" }
::= { snmp 5 }
snmpCont OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snmp contact information"
::= { snmp 6 }
snmpLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snmp location information"
::= { snmp 7 }
sysObjectID OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SNMP company OID"
DEFVAL { "1.3.6.1.4.1.14125" }
::= { snmp 8 }
-- ============== END ===========================
-- =======| configuration > wmm | ===============
wmmEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable WMM setting"
DEFVAL { disable }
::= { wmm 1 }
-- ============== END ===========================
-- =======| configuration > logemail | ===============
logServerEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable remote log server which log sent to"
DEFVAL { disable }
::= { logemail 1 }
logServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote log server IP address"
DEFVAL { "0.0.0.0" }
::= { logemail 2 }
logLocalEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable local log server"
DEFVAL { disable }
::= { logemail 3 }
logLevel OBJECT-TYPE
SYNTAX INTEGER
{
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
information(6),
debug(7),
all(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The level (all/ Debug/ Information/ Notice/ Warning/ Error/ Critical/ Alert/ Emergency) of log message"
DEFVAL { all }
::= { logemail 4 }
-- ============== END ===========================
-- =======| configuration > vpn | ===============
vpnPassthroughPPTP OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable PPTP packages pass through"
DEFVAL { enable }
::= { vpn 1 }
vpnPassthroughL2TP OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable L2TP packages pass through"
DEFVAL { enable }
::= { vpn 2 }
vpnPassthroughIPSec OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable IPSec packages pass through"
DEFVAL { enable }
::= { vpn 3 }
-- ============== END ===========================
-- =======| configuration > vpn | ===============
tcEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable Traffic Shapping"
DEFVAL { disable }
::= { traffic 1 }
tcInRate OBJECT-TYPE
SYNTAX Integer32 (0..999999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Incoming Traffic Limit, in kbits/s"
::= { traffic 2 }
tcInBurst OBJECT-TYPE
SYNTAX Integer32 (0..999999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Incoming Traffic Burst, in kBytes"
::= { traffic 3 }
tcOutRate OBJECT-TYPE
SYNTAX Integer32 (0..999999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Outgoing Traffic Limit, in kbits/s"
::= { traffic 4 }
tcOutBurst OBJECT-TYPE
SYNTAX Integer32 (0..999999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Outgoing Traffic Burst, in kBytes"
::= { traffic 5 }
-- ==============================================
-- =============== SAVE CMD ====================
executeSaveCmd OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SnmpSet with value 1 to execute the cfg_save() command."
::= { saveCmd 1 }
-- =============================================
-- ============= RESET CMD ==================
executeResetCmd OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SnmpSet with value 1 to execute the cfg_factory_default() command."
::= { resetCmd 1 }
-- ===========================================
-- ============= REBOOT CMD ==================
executeRebootCmd OBJECT-TYPE
SYNTAX Integer32 (1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Define the timeout (1~300seconds) and execute the reboot command."
::= { rebootCmd 1 }
-- ===========================================
END
Reference in New Issue View Git Blame Copy Permalink