librenms/mibs/ALTIGA-PPTP-STATS-MIB
2010-08-04 16:11:32 +00:00

812 lines
28 KiB
Plaintext

-- *------------------------------------------------------------------
-- * ALTIGA-PPTP-STATS-MIB.my: Altiga PPTP Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-PPTP-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Counter32, Gauge32
FROM SNMPv2-SMI
RowStatus, DisplayString, TruthValue
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsPptp, alPptpGroup
FROM ALTIGA-MIB
alPptpMibModule
FROM ALTIGA-GLOBAL-REG;
altigaPptpStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga PPTP Statistics MIB models counters and objects that are
of management interest for PPTP tunnels.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
PPTP: Point-to-Point Tunneling Protocol
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alPptpMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsPptpGlobal OBJECT IDENTIFIER ::= { alStatsPptp 1 }
alPptpStatsLocalProtVers OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the protocol version and
revision of the local implementation. The
first octet contains the protocol version. The
second octet contains the protocol revision."
::= { alStatsPptpGlobal 1 }
alPptpStatsLocalFraming OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A set of bits indicating the PPTP framing capabilities
of this system."
::= { alStatsPptpGlobal 2 }
alPptpStatsLocalBearer OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A set of bits indicating the PPTP bearer capabilities
of this system."
::= { alStatsPptpGlobal 3 }
alPptpStatsLocalFirmwareRev OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object defines the local firmware revision."
::= { alStatsPptpGlobal 4 }
alPptpStatsTotalTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of tunnels,
including those that did not reach the established
state."
::= { alStatsPptpGlobal 5 }
alPptpStatsActiveTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of tunnels that
are currently active."
::= { alStatsPptpGlobal 6 }
alPptpStatsMaxTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of simultaneously active PPTP tunnels
since the system was booted."
::= { alStatsPptpGlobal 7 }
alPptpStatsTotalSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of sessions,
including those that did not reach the established
state."
::= { alStatsPptpGlobal 8 }
alPptpStatsActiveSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of sessions that
are currently active."
::= { alStatsPptpGlobal 9 }
alPptpStatsMaxSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of simultaneously active PPTP sessions
since the system was booted."
::= { alStatsPptpGlobal 10 }
alPptpStatsControlRecvOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control channel
octets received."
::= { alStatsPptpGlobal 11 }
alPptpStatsControlRecvPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control packets
received."
::= { alStatsPptpGlobal 12 }
alPptpStatsControlRecvDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control packets
received that were discarded."
::= { alStatsPptpGlobal 13 }
alPptpStatsControlSendOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control channel
octets that were transmitted to tunnel endpoints."
::= { alStatsPptpGlobal 14 }
alPptpStatsControlSendPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control packets
that were transmitted to tunnel endpoints."
::= { alStatsPptpGlobal 15 }
alPptpStatsPayloadRecvOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of payload channel
octets that were received."
::= { alStatsPptpGlobal 16 }
alPptpStatsPayloadRecvPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of payload packets
that were received."
::= { alStatsPptpGlobal 17 }
alPptpStatsPayloadRecvDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of received payload
packets that were discarded."
::= { alStatsPptpGlobal 18 }
alPptpStatsPayloadSendOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of payload channel
octets that were transmitted to tunnel peers."
::= { alStatsPptpGlobal 19 }
alPptpStatsPayloadSendPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of payload packets
that were transmitted to tunnel peers."
::= { alStatsPptpGlobal 20 }
alPptpStatsTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlPptpStatsTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PPTP tunnel status and statistics table."
::= { alStatsPptp 2 }
alPptpStatsTunnelEntry OBJECT-TYPE
SYNTAX AlPptpStatsTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alPptpStatsTunnelTable."
INDEX { alPptpStatsTunnelPeerIpAddr }
::= { alPptpStatsTunnelTable 1 }
AlPptpStatsTunnelEntry ::= SEQUENCE {
alPptpStatsTunnelRowStatus RowStatus,
alPptpStatsTunnelPeerIpAddr IpAddress,
alPptpStatsTunnelDatastreamId Integer32,
alPptpStatsTunnelLocalIpAddr IpAddress,
alPptpStatsTunnelPeerHostName DisplayString,
alPptpStatsTunnelPeerVendorName DisplayString,
alPptpStatsTunnelPeerFirmwareRev OCTET STRING,
alPptpStatsTunnelPeerProtVers OCTET STRING,
alPptpStatsTunnelPeerFramingCap Integer32,
alPptpStatsTunnelPeerBearerCap Integer32,
alPptpStatsTunnelPeerMaxChan Integer32,
alPptpStatsTunnelActiveSessions Counter32
}
alPptpStatsTunnelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row. Used to terminate the tunnel,
cannot be used to create a tunnel."
::= { alPptpStatsTunnelEntry 1 }
alPptpStatsTunnelPeerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer's IP address for this tunnel."
::= { alPptpStatsTunnelEntry 2 }
alPptpStatsTunnelDatastreamId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP-GRE datastream ID of this tunnel."
::= { alPptpStatsTunnelEntry 3 }
alPptpStatsTunnelLocalIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local IP address for this tunnel."
::= { alPptpStatsTunnelEntry 4 }
alPptpStatsTunnelPeerHostName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer's host name, as indicated by the peer in a
Start-Control-Connection packet."
::= { alPptpStatsTunnelEntry 5 }
alPptpStatsTunnelPeerVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer's vendor name, as indicated by the peer in a
Start-Control-Connection packet."
::= { alPptpStatsTunnelEntry 6 }
alPptpStatsTunnelPeerFirmwareRev OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the tunnel peer's firmware
revision number. If the tunnel is idle this object
should maintain its value from the last time it
was connected."
::= { alPptpStatsTunnelEntry 7 }
alPptpStatsTunnelPeerProtVers OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the protocol version and
revision of the tunnel peers implementation. The
first octet contains the protocol version. The
second octet contains the protocol revision."
::= { alPptpStatsTunnelEntry 8 }
alPptpStatsTunnelPeerFramingCap OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the Framing Capabilities of
the tunnel peer. If the tunnel is idle this object
should maintain its value from the last time it was
connected."
::= { alPptpStatsTunnelEntry 9 }
alPptpStatsTunnelPeerBearerCap OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the Bearer Capabilities of
the tunnel peer. If the tunnel is idle this object
should maintain its value from the last time it was
connected."
::= { alPptpStatsTunnelEntry 10 }
alPptpStatsTunnelPeerMaxChan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer's maximum channels value, as indicated by
the peer in a Start-Control-Connection packet."
::= { alPptpStatsTunnelEntry 11 }
alPptpStatsTunnelActiveSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of sessions
for this tunnel."
::= { alPptpStatsTunnelEntry 12 }
alPptpStatsSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlPptpStatsSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of active sessions within tunnels."
::= { alStatsPptp 3 }
alPptpStatsSessionEntry OBJECT-TYPE
SYNTAX AlPptpStatsSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alPptpStatsSessionTable."
INDEX { alPptpStatsSessionDatastreamId }
::= { alPptpStatsSessionTable 1 }
AlPptpStatsSessionEntry ::= SEQUENCE {
alPptpStatsSessionRowStatus RowStatus,
alPptpStatsSessionDatastreamId Integer32,
alPptpStatsSessionLocalCallId Integer32,
alPptpStatsSessionPeerCallId Integer32,
alPptpStatsSessionUserName DisplayString,
alPptpStatsSessionSerial Integer32,
alPptpStatsSessionMinimumSpeed Integer32,
alPptpStatsSessionMaximumSpeed Integer32,
alPptpStatsSessionConnectSpeed Integer32,
alPptpStatsSessionBearerType INTEGER,
alPptpStatsSessionFramingType INTEGER,
alPptpStatsSessionPhysicalChannel Integer32,
alPptpStatsSessionLocalWindowSize Integer32,
alPptpStatsSessionPeerWindowSize Integer32,
alPptpStatsSessionLocalPpd Integer32,
alPptpStatsSessionPeerPpd Integer32,
alPptpStatsSessionRecvOctets Counter32,
alPptpStatsSessionRecvPackets Counter32,
alPptpStatsSessionRecvDiscards Counter32,
alPptpStatsSessionRecvZLB Counter32,
alPptpStatsSessionSendOctets Counter32,
alPptpStatsSessionSendPackets Counter32,
alPptpStatsSessionSendZLB Counter32,
alPptpStatsSessionAckTimeouts Counter32,
alPptpStatsSessionLocalFlowOff TruthValue,
alPptpStatsSessionPeerFlowOff TruthValue,
alPptpStatsSessionOutOfWindow Counter32,
alPptpStatsSessionOutOfSequence Counter32,
alPptpStatsSessionTunnelPeerIpAddr IpAddress
}
alPptpStatsSessionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row. Used to terminate the session,
cannot be used to create a Session."
::= { alPptpStatsSessionEntry 1 }
alPptpStatsSessionDatastreamId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The GRE-PPP datastream ID of this tunnel, used as the
index for this row."
::= { alPptpStatsSessionEntry 2 }
alPptpStatsSessionLocalCallId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local call ID within the tunnel of the session
represented by this row."
::= { alPptpStatsSessionEntry 3 }
alPptpStatsSessionPeerCallId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer call ID within the tunnel of the session
represented by this row."
::= { alPptpStatsSessionEntry 4 }
alPptpStatsSessionUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the peer session name on
this interface. This is typically the login name
of the remote user. If the user name is unknown to
the local tunnel peer then this object will contain
a null string."
::= { alPptpStatsSessionEntry 5 }
alPptpStatsSessionSerial OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The call serial number within the tunnel of the session
represented by this row."
::= { alPptpStatsSessionEntry 6 }
alPptpStatsSessionMinimumSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lowest acceptable line speed (in bits/second)
for this session, as indicated in the Call-Request
packet."
::= { alPptpStatsSessionEntry 7 }
alPptpStatsSessionMaximumSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest acceptable line speed (in bits/second)
for this session, as indicated in the Call-Request
packet."
::= { alPptpStatsSessionEntry 8 }
alPptpStatsSessionConnectSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual line speed (in bits/second) for this session."
::= { alPptpStatsSessionEntry 9 }
alPptpStatsSessionBearerType OBJECT-TYPE
SYNTAX INTEGER {
analog (1),
digital (2),
any (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value indicating the bearer capability required for
this session."
::= { alPptpStatsSessionEntry 10 }
alPptpStatsSessionFramingType OBJECT-TYPE
SYNTAX INTEGER {
asynchronous (1),
synchronous (2),
either (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value indicating the framing capability required for
this session."
::= { alPptpStatsSessionEntry 11 }
alPptpStatsSessionPhysicalChannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical channel number used for this session."
::= { alPptpStatsSessionEntry 12 }
alPptpStatsSessionLocalWindowSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received data packets this system will
buffer for this session, as indicated in the setup packets
for this session."
::= { alPptpStatsSessionEntry 13 }
alPptpStatsSessionPeerWindowSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received data packets the peer will
buffer for this session, as indicated in the setup packets
for this session."
::= { alPptpStatsSessionEntry 14 }
alPptpStatsSessionLocalPpd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A measure of the packet processing delay that might be
imposed on data sent to this system, in units of 1/10
seconds."
::= { alPptpStatsSessionEntry 15 }
alPptpStatsSessionPeerPpd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A measure of the packet processing delay that might be
imposed on data sent to the peer, in units of 1/10
seconds."
::= { alPptpStatsSessionEntry 16 }
alPptpStatsSessionRecvOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number payload octets
received for this session."
::= { alPptpStatsSessionEntry 17 }
alPptpStatsSessionRecvPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of payload packets
received for this session."
::= { alPptpStatsSessionEntry 18 }
alPptpStatsSessionRecvDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of payload packets
received that were discarded for this session."
::= { alPptpStatsSessionEntry 19 }
alPptpStatsSessionRecvZLB OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of Zero Length
Body acknowlegement payload packets received for
this session."
::= { alPptpStatsSessionEntry 20 }
alPptpStatsSessionSendOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of payload octets
transmitted for this session."
::= { alPptpStatsSessionEntry 21 }
alPptpStatsSessionSendPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of payload packets
transmitted for this session."
::= { alPptpStatsSessionEntry 22 }
alPptpStatsSessionSendZLB OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of Zero
Length Body acknowledgement packets transmitted
for this session."
::= { alPptpStatsSessionEntry 23 }
alPptpStatsSessionAckTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of
acknowledgement timeouts seen on payload
packets for this session."
::= { alPptpStatsSessionEntry 24 }
alPptpStatsSessionLocalFlowOff OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the session is in a locally flowed-off
state because the number of outstanding unacknowledged
packets received from the peer is equal to the local
window size."
::= { alPptpStatsSessionEntry 25 }
alPptpStatsSessionPeerFlowOff OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the session peer is in a flowed-off
state because the number of outstanding unacknowledged
packets sent to the peer is equal to the peer's window
size."
::= { alPptpStatsSessionEntry 26 }
alPptpStatsSessionOutOfWindow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of data packets received from the peer which
were received outside of the offered receive window."
::= { alPptpStatsSessionEntry 27 }
alPptpStatsSessionOutOfSequence OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of data packets that were not received in the
correct order (as per the sequence number)."
::= { alPptpStatsSessionEntry 28 }
alPptpStatsSessionTunnelPeerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer's IP address for the tunnel over which this session
is established."
::= { alPptpStatsSessionEntry 29 }
altigaPptpStatsMibConformance OBJECT IDENTIFIER ::= { altigaPptpStatsMibModule 1 }
altigaPptpStatsMibCompliances OBJECT IDENTIFIER ::= { altigaPptpStatsMibConformance 1 }
altigaPptpStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga PPTP Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaPptpStatsGroup
}
::= { altigaPptpStatsMibCompliances 1 }
altigaPptpStatsGroup OBJECT-GROUP
OBJECTS
{
alPptpStatsLocalProtVers,
alPptpStatsLocalFraming,
alPptpStatsLocalBearer,
alPptpStatsLocalFirmwareRev,
alPptpStatsTotalTunnels,
alPptpStatsActiveTunnels,
alPptpStatsMaxTunnels,
alPptpStatsTotalSessions,
alPptpStatsActiveSessions,
alPptpStatsMaxSessions,
alPptpStatsControlRecvOctets,
alPptpStatsControlRecvPackets,
alPptpStatsControlRecvDiscards,
alPptpStatsControlSendOctets,
alPptpStatsControlSendPackets,
alPptpStatsPayloadRecvOctets,
alPptpStatsPayloadRecvPackets,
alPptpStatsPayloadRecvDiscards,
alPptpStatsPayloadSendOctets,
alPptpStatsPayloadSendPackets,
alPptpStatsTunnelRowStatus,
alPptpStatsTunnelDatastreamId,
alPptpStatsTunnelLocalIpAddr,
alPptpStatsTunnelPeerIpAddr,
alPptpStatsTunnelPeerHostName,
alPptpStatsTunnelPeerVendorName,
alPptpStatsTunnelPeerFirmwareRev,
alPptpStatsTunnelPeerProtVers,
alPptpStatsTunnelPeerFramingCap,
alPptpStatsTunnelPeerBearerCap,
alPptpStatsTunnelPeerMaxChan,
alPptpStatsTunnelActiveSessions,
alPptpStatsSessionRowStatus,
alPptpStatsSessionDatastreamId,
alPptpStatsSessionLocalCallId,
alPptpStatsSessionPeerCallId,
alPptpStatsSessionUserName,
alPptpStatsSessionSerial,
alPptpStatsSessionMinimumSpeed,
alPptpStatsSessionMaximumSpeed,
alPptpStatsSessionConnectSpeed,
alPptpStatsSessionBearerType,
alPptpStatsSessionFramingType,
alPptpStatsSessionPhysicalChannel,
alPptpStatsSessionLocalWindowSize,
alPptpStatsSessionPeerWindowSize,
alPptpStatsSessionLocalPpd,
alPptpStatsSessionPeerPpd,
alPptpStatsSessionRecvOctets,
alPptpStatsSessionRecvPackets,
alPptpStatsSessionRecvDiscards,
alPptpStatsSessionRecvZLB,
alPptpStatsSessionSendOctets,
alPptpStatsSessionSendPackets,
alPptpStatsSessionSendZLB,
alPptpStatsSessionAckTimeouts,
alPptpStatsSessionLocalFlowOff,
alPptpStatsSessionPeerFlowOff,
alPptpStatsSessionOutOfWindow,
alPptpStatsSessionOutOfSequence,
alPptpStatsSessionTunnelPeerIpAddr
}
STATUS current
DESCRIPTION
"The objects for PPTP statistics."
::= { alPptpGroup 2 }
END