mirror of
https://github.com/librenms/librenms.git
synced 2024-09-21 18:38:25 +00:00
53a4e91e8c
git-svn-id: http://www.observium.org/svn/observer/trunk@1645 61d68cd4-352d-0410-923a-c4978735b2b8
1795 lines
61 KiB
Plaintext
1795 lines
61 KiB
Plaintext
DS3-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
NOTIFICATION-TYPE, transmission
|
|
FROM SNMPv2-SMI -- [RFC2578 </rfcs/rfc2578.html>]
|
|
DisplayString, TimeStamp, TruthValue
|
|
FROM SNMPv2-TC -- [RFC2579 </rfcs/rfc2579.html>]
|
|
MODULE-COMPLIANCE, OBJECT-GROUP,
|
|
NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF -- [RFC2580 </rfcs/rfc2580.html>]
|
|
InterfaceIndex
|
|
FROM IF-MIB -- [RFC2863 </rfcs/rfc2863.html>]
|
|
PerfCurrentCount, PerfIntervalCount,
|
|
PerfTotalCount
|
|
FROM PerfHist-TC-MIB; -- [RFC3593 </rfcs/rfc3593.html>]
|
|
|
|
ds3 MODULE-IDENTITY
|
|
LAST-UPDATED "200409080000Z" -- September 08, 2004
|
|
ORGANIZATION "IETF AToM MIB Working Group"
|
|
CONTACT-INFO
|
|
"WG charter:
|
|
http://www.ietf.org/html.charters/atommib-charter.html
|
|
|
|
Mailing Lists:
|
|
General Discussion: atommib@research.telcordia.com <mailto:atommib@research.telcordia.com>
|
|
To Subscribe: atommib-request@research.telcordia.com <mailto:atommib-request@research.telcordia.com>
|
|
|
|
Editor: Orly Nicklass
|
|
|
|
Postal: RAD Data Communications, Ltd.
|
|
Ziv Tower, 24 Roul Walenberg
|
|
Tel Aviv, Israel, 69719
|
|
|
|
Tel: +9723 765 9969
|
|
E-mail: orly_n@rad.com <mailto:orly_n@rad.com>"
|
|
|
|
DESCRIPTION
|
|
"The is the MIB module that describes
|
|
DS3 and E3 interfaces objects.
|
|
|
|
Copyright (c) The Internet Society (2004). This
|
|
version of this MIB module is part of RFC 3896 </rfcs/rfc3896.html>;
|
|
see the RFC itself for full legal notices."
|
|
|
|
REVISION "200409080000Z" -- September 08, 2004
|
|
|
|
DESCRIPTION
|
|
"The RFC 3896 </rfcs/rfc3896.html> version of this MIB module.
|
|
The key changes made to this MIB module
|
|
since its publication in RFC 2496 </rfcs/rfc2496.html> are as follows:
|
|
|
|
(1) The dsx3FracIfIndex SYNTAX matches the description range.
|
|
|
|
(2) Reference was added to Circuit Identifier object.
|
|
|
|
(3) Usage of ifStackTable section was updated.
|
|
|
|
(4) Align the DESCRIPTION clauses of few statistic objects with
|
|
thenear end definition, the far end definition and with
|
|
RFC 3593 </rfcs/rfc3593.html>.
|
|
|
|
(5) Add new value, dsx3M13, to dsx3LineType."
|
|
|
|
REVISION "199808012130Z"
|
|
|
|
DESCRIPTION
|
|
"The RFC 2496 </rfcs/rfc2496.html> version of this MIB module.
|
|
The key changes made to this MIB module
|
|
since its publication in RFC 1407 </rfcs/rfc1407.html> are as follows:
|
|
|
|
(1) The Fractional Table has been deprecated.
|
|
|
|
(2) This document uses SMIv2.
|
|
|
|
(3) Values are given for ifTable and ifXTable.
|
|
|
|
(4) Example usage of ifStackTable is included.
|
|
|
|
(5) dsx3IfIndex has been deprecated.
|
|
|
|
(6) The definition of valid intervals has been clarified
|
|
for the case where the agent proxied for other devices.
|
|
In particular, the treatment of missing intervals has
|
|
been clarified.
|
|
|
|
(7) An inward loopback has been added.
|
|
|
|
(8) Additional lineStatus bits have been added for Near End
|
|
in Unavailable Signal State, Carrier Equipment Out of
|
|
Service.
|
|
|
|
(9) A read-write line Length object has been added.
|
|
|
|
(10) Added a lineStatus last change, trap and enabler.
|
|
|
|
(11) Textual Conventions for statistics objects have
|
|
been used.
|
|
|
|
(12) A new object, dsx3LoopbackStatus, has been introduced to
|
|
reflect the loopbacks established on a DS3/E3 interface
|
|
and the source to the requests. dsx3LoopbackConfig
|
|
continues to be the desired loopback state while
|
|
dsx3LoopbackStatus reflects the actual state.
|
|
|
|
(13) A dual loopback has been added to allow the setting of
|
|
an inward loopback and a line loopback at the same time.
|
|
|
|
(14) An object has been added to indicated whether or not
|
|
this is a channelized DS3/E3.
|
|
|
|
(15) A new object has been added to indicate which DS1 is to
|
|
set for remote loopback."
|
|
|
|
REVISION "199301252028Z"
|
|
DESCRIPTION
|
|
"Initial version, published as RFC 1407 </rfcs/rfc1407.html>."
|
|
::= { transmission 30 }
|
|
|
|
-- The DS3/E3 Near End Group
|
|
|
|
-- The DS3/E3 Near End Group consists of four tables:
|
|
-- DS3/E3 Configuration
|
|
-- DS3/E3 Current
|
|
-- DS3/E3 Interval
|
|
-- DS3/E3 Total
|
|
|
|
-- the DS3/E3 Configuration Table
|
|
|
|
dsx3ConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx3ConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS3/E3 Configuration table."
|
|
::= { ds3 5 }
|
|
|
|
dsx3ConfigEntry OBJECT-TYPE
|
|
SYNTAX Dsx3ConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS3/E3 Configuration table."
|
|
INDEX { dsx3LineIndex }
|
|
::= { dsx3ConfigTable 1 }
|
|
|
|
Dsx3ConfigEntry ::=
|
|
SEQUENCE {
|
|
dsx3LineIndex InterfaceIndex,
|
|
dsx3IfIndex InterfaceIndex,
|
|
dsx3TimeElapsed INTEGER,
|
|
dsx3ValidIntervals INTEGER,
|
|
dsx3LineType INTEGER,
|
|
dsx3LineCoding INTEGER,
|
|
dsx3SendCode INTEGER,
|
|
dsx3CircuitIdentifier DisplayString,
|
|
dsx3LoopbackConfig INTEGER,
|
|
dsx3LineStatus INTEGER,
|
|
dsx3TransmitClockSource INTEGER,
|
|
dsx3InvalidIntervals INTEGER,
|
|
dsx3LineLength INTEGER,
|
|
dsx3LineStatusLastChange TimeStamp,
|
|
dsx3LineStatusChangeTrapEnable INTEGER,
|
|
dsx3LoopbackStatus INTEGER,
|
|
dsx3Channelization INTEGER,
|
|
dsx3Ds1ForRemoteLoop INTEGER
|
|
}
|
|
|
|
dsx3LineIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object should be made equal to ifIndex. The
|
|
next paragraph describes its previous usage.
|
|
Making the object equal to ifIndex allows proper
|
|
use of ifStackTable.
|
|
|
|
Previously, this object was the identifier of a
|
|
DS3/E3 Interface on a managed device. If there is
|
|
an ifEntry that is directly associated with this
|
|
and only this DS3/E3 interface, it should have the
|
|
same value as ifIndex. Otherwise, number the
|
|
dsx3LineIndices with an unique identifier
|
|
following the rules of choosing a number that is
|
|
greater than ifNumber and numbering the inside
|
|
interfaces (e.g., equipment side) with even
|
|
numbers and outside interfaces (e.g., network side)
|
|
with odd numbers."
|
|
::= { dsx3ConfigEntry 1 }
|
|
|
|
dsx3IfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This value for this object is equal to the value
|
|
of ifIndex from the Interfaces table of MIB II
|
|
(RFC 1213 </rfcs/rfc1213.html>)."
|
|
::= { dsx3ConfigEntry 2 }
|
|
|
|
dsx3TimeElapsed OBJECT-TYPE
|
|
SYNTAX INTEGER (0..899)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that have elapsed since the
|
|
|
|
beginning of the near end current error-
|
|
measurement period. If, for some reason, such as
|
|
an adjustment in the system's time-of-day clock,
|
|
the current interval exceeds the maximum value,
|
|
the agent will return the maximum value."
|
|
::= { dsx3ConfigEntry 3 }
|
|
|
|
dsx3ValidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous near end intervals for
|
|
which data was collected. The value will be 96
|
|
unless the interface was brought online within the
|
|
last 24 hours, in which case the value will be the
|
|
number of complete 15 minute near end intervals
|
|
since the interface has been online. In the case
|
|
where the agent is a proxy, it is possible that
|
|
some intervals are unavailable. In this case,
|
|
this interval is the maximum interval number for
|
|
which data is available."
|
|
::= { dsx3ConfigEntry 4 }
|
|
|
|
dsx3LineType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dsx3other(1),
|
|
dsx3M23(2),
|
|
dsx3SYNTRAN(3),
|
|
dsx3CbitParity(4),
|
|
dsx3ClearChannel(5),
|
|
e3other(6),
|
|
e3Framed(7),
|
|
e3Plcp(8),
|
|
dsx3M13(9)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the variety of DS3 C-bit
|
|
or E3 application implementing this interface. The
|
|
type of interface affects the interpretation of
|
|
the usage and error statistics. The rate of DS3
|
|
is 44.736 Mbps and E3 is 34.368 Mbps. The
|
|
dsx3ClearChannel value means that the C-bits are
|
|
not used except for sending/receiving AIS. The
|
|
values, in sequence, describe:
|
|
|
|
TITLE: SPECIFICATION:
|
|
dsx3M23 ANSI T1.107-1988
|
|
dsx3SYNTRAN ANSI T1.107-1988
|
|
dsx3CbitParity ANSI T1.107a-1990
|
|
dsx3ClearChannel ANSI T1.102-1987
|
|
e3Framed CCITT G.751
|
|
e3Plcp ETSI T/NA(91)18
|
|
dsx3M13 ANSI T1.107a-1990."
|
|
|
|
REFERENCE
|
|
"American National Standard for telecommunications
|
|
- digital hierarchy -
|
|
formats specification, ANSI T1.107- 1988.
|
|
ANSI T1.107a-1990.
|
|
American National Standard for telecommunications
|
|
- digital hierarchy -
|
|
electrical interfaces, ANSI T1.102- 1987.
|
|
CCITT - Digital Multiplex Equipment Operating at
|
|
the Third Order Bit Rate of 34 368 Kbit/s and
|
|
the Forth Order Bit Rate of 139 264 Kbit/s
|
|
and Using Positive Justification, G.751
|
|
European Telecommunications Standards Institute
|
|
-- ETS '34M' --
|
|
Metropolitan Area Network Physical
|
|
Convergence Layer Procedure for
|
|
34.368 Megabits per Second, T/NA(91)18,
|
|
May 1991."
|
|
::= { dsx3ConfigEntry 5 }
|
|
|
|
dsx3LineCoding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dsx3Other(1),
|
|
dsx3B3ZS(2),
|
|
e3HDB3(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable describes the variety of Zero Code
|
|
Suppression used on this interface, which in turn
|
|
affects a number of its characteristics.
|
|
dsx3B3ZS and e3HDB3 refer to the use of specified
|
|
patterns of normal bits and bipolar violations
|
|
which are used to replace sequences of zero bits
|
|
of a specified length."
|
|
::= { dsx3ConfigEntry 6 }
|
|
|
|
dsx3SendCode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dsx3SendNoCode(1),
|
|
dsx3SendLineCode(2),
|
|
dsx3SendPayloadCode(3),
|
|
dsx3SendResetCode(4),
|
|
dsx3SendDS1LoopCode(5),
|
|
dsx3SendTestPattern(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates what type of code is
|
|
being sent across the DS3/E3 interface by the
|
|
device. (These are optional for E3 interfaces.)
|
|
Setting this variable causes the interface to
|
|
begin sending the code requested.
|
|
The values mean:
|
|
|
|
dsx3SendNoCode
|
|
sending looped or normal data
|
|
|
|
dsx3SendLineCode
|
|
sending a request for a line loopback
|
|
|
|
dsx3SendPayloadCode
|
|
sending a request for a payload loopback
|
|
(i.e., all DS1/E1s in a DS3/E3 frame)
|
|
|
|
dsx3SendResetCode
|
|
sending a loopback deactivation request
|
|
|
|
dsx3SendDS1LoopCode
|
|
requesting to loopback a particular DS1/E1
|
|
within a DS3/E3 frame. The DS1/E1 is
|
|
indicated in dsx3Ds1ForRemoteLoop.
|
|
|
|
dsx3SendTestPattern
|
|
sending a test pattern."
|
|
::= { dsx3ConfigEntry 7 }
|
|
|
|
dsx3CircuitIdentifier OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable contains the transmission vendor's
|
|
circuit identifier, for the purpose of
|
|
facilitating troubleshooting."
|
|
|
|
REFERENCE "ITU-T M.1400"
|
|
::= { dsx3ConfigEntry 8 }
|
|
|
|
dsx3LoopbackConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dsx3NoLoop(1),
|
|
dsx3PayloadLoop(2),
|
|
dsx3LineLoop(3),
|
|
dsx3OtherLoop(4),
|
|
dsx3InwardLoop(5),
|
|
dsx3DualLoop(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable represents the desired loopback
|
|
configuration of the DS3/E3 interface.
|
|
The values mean:
|
|
|
|
dsx3NoLoop
|
|
Not in the loopback state. A device that is
|
|
not capable of performing a loopback on
|
|
the interface shall always return this as
|
|
its value.
|
|
|
|
dsx3PayloadLoop
|
|
The received signal at this interface is looped
|
|
through the device. Typically the received signal
|
|
is looped back for retransmission after it has
|
|
passed through the device's framing function.
|
|
|
|
dsx3LineLoop
|
|
The received signal at this interface does not
|
|
go through the device (minimum penetration) but
|
|
is looped back out.
|
|
|
|
dsx3OtherLoop
|
|
Loopbacks that are not defined here.
|
|
|
|
dsx3InwardLoop
|
|
The sent signal at this interface is looped back
|
|
through the device.
|
|
|
|
dsx3DualLoop
|
|
Both dsx1LineLoop and dsx1InwardLoop will be
|
|
active simultaneously."
|
|
::= { dsx3ConfigEntry 9 }
|
|
|
|
dsx3LineStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the Line Status of the
|
|
interface. It contains loopback state information
|
|
and failure state information. The dsx3LineStatus
|
|
is a bit map represented as a sum, therefore, it
|
|
can represent multiple failures and a loopback
|
|
(see dsx3LoopbackConfig object for the type of
|
|
loopback) simultaneously. The dsx3NoAlarm must be
|
|
set if and only if no other flag is set.
|
|
|
|
If the dsx3loopbackState bit is set, the loopback
|
|
in effect can be determined from the
|
|
dsx3loopbackConfig object.
|
|
The various bit positions are:
|
|
1 dsx3NoAlarm No alarm present
|
|
2 dsx3RcvRAIFailure Receiving Yellow/Remote
|
|
Alarm Indication
|
|
4 dsx3XmitRAIAlarm Transmitting Yellow/Remote
|
|
Alarm Indication
|
|
8 dsx3RcvAIS Receiving AIS failure state
|
|
16 dsx3XmitAIS Transmitting AIS
|
|
32 dsx3LOF Receiving LOF failure state
|
|
64 dsx3LOS Receiving LOS failure state
|
|
128 dsx3LoopbackState Looping the received signal
|
|
256 dsx3RcvTestCode Receiving a Test Pattern
|
|
512 dsx3OtherFailure any line status not defined
|
|
here
|
|
1024 dsx3UnavailSigState Near End in Unavailable
|
|
Signal State
|
|
2048 dsx3NetEquipOOS Carrier Equipment Out of
|
|
Service"
|
|
::= { dsx3ConfigEntry 10 }
|
|
|
|
dsx3TransmitClockSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
loopTiming(1),
|
|
localTiming(2),
|
|
throughTiming(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source of Transmit Clock.
|
|
|
|
loopTiming indicates that the recovered receive
|
|
clock is used as the transmit clock.
|
|
|
|
localTiming indicates that a local clock source is
|
|
used or that an external clock is attached to the
|
|
box containing the interface.
|
|
|
|
throughTiming indicates that transmit clock is
|
|
derived from the recovered receive clock of
|
|
another DS3 interface."
|
|
::= { dsx3ConfigEntry 11 }
|
|
|
|
dsx3InvalidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The number of intervals in the range from 0 to
|
|
dsx3ValidIntervals for which no data is available.
|
|
This object will typically be zero except in cases
|
|
where the data for some intervals are not
|
|
available (e.g., in proxy situations)."
|
|
::= { dsx3ConfigEntry 12 }
|
|
|
|
dsx3LineLength OBJECT-TYPE
|
|
SYNTAX INTEGER (0..64000)
|
|
UNITS "meters"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of the ds3 line in meters. This
|
|
object provides information for line build out
|
|
circuitry if it exists and can use this object to
|
|
adjust the line build out."
|
|
::= { dsx3ConfigEntry 13 }
|
|
|
|
dsx3LineStatusLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of MIB II's sysUpTime object at the
|
|
time this DS3/E3 entered its current line status
|
|
state. If the current state was entered prior to
|
|
the last re-initialization of the proxy-agent,
|
|
then this object contains a zero value."
|
|
::= { dsx3ConfigEntry 14 }
|
|
|
|
dsx3LineStatusChangeTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether dsx3LineStatusChange traps
|
|
should be generated for this interface."
|
|
DEFVAL { disabled }
|
|
::= { dsx3ConfigEntry 15 }
|
|
|
|
dsx3LoopbackStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (1..127)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable represents the current state of the
|
|
loopback on the DS3 interface. It contains
|
|
information about loopbacks established by a
|
|
manager and remotely from the far end.
|
|
|
|
The dsx3LoopbackStatus is a bit map represented as
|
|
a sum, therefore is can represent multiple
|
|
loopbacks simultaneously.
|
|
|
|
The various bit positions are:
|
|
1 dsx3NoLoopback
|
|
2 dsx3NearEndPayloadLoopback
|
|
4 dsx3NearEndLineLoopback
|
|
8 dsx3NearEndOtherLoopback
|
|
16 dsx3NearEndInwardLoopback
|
|
32 dsx3FarEndPayloadLoopback
|
|
64 dsx3FarEndLineLoopback"
|
|
::= { dsx3ConfigEntry 16 }
|
|
|
|
dsx3Channelization OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabledDs1(2),
|
|
enabledDs2(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether this ds3/e3 is channelized or
|
|
unchannelized. The value of enabledDs1 indicates
|
|
|
|
that this is a DS3 channelized into DS1s. The
|
|
value of enabledDs3 indicated that this is a DS3
|
|
channelized into DS2s. Setting this object will
|
|
cause the creation or deletion of DS2 or DS1
|
|
entries in the ifTable. "
|
|
::= { dsx3ConfigEntry 17 }
|
|
|
|
dsx3Ds1ForRemoteLoop OBJECT-TYPE
|
|
SYNTAX INTEGER (0..29)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates which DS1/E1 on this DS3/E3 will be
|
|
indicated in the remote ds1 loopback request. A
|
|
value of 0 means no DS1 will be looped. A value
|
|
of 29 means all DS1s/E1s will be looped."
|
|
::= { dsx3ConfigEntry 18 }
|
|
|
|
-- the DS3/E3 Current Table
|
|
|
|
dsx3CurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx3CurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS3/E3 current table contains various
|
|
statistics being collected for the current 15
|
|
minute interval."
|
|
::= { ds3 6 }
|
|
|
|
dsx3CurrentEntry OBJECT-TYPE
|
|
SYNTAX Dsx3CurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS3/E3 Current table."
|
|
INDEX { dsx3CurrentIndex }
|
|
::= { dsx3CurrentTable 1 }
|
|
|
|
Dsx3CurrentEntry ::=
|
|
SEQUENCE {
|
|
dsx3CurrentIndex InterfaceIndex,
|
|
dsx3CurrentPESs PerfCurrentCount,
|
|
dsx3CurrentPSESs PerfCurrentCount,
|
|
dsx3CurrentSEFSs PerfCurrentCount,
|
|
dsx3CurrentUASs PerfCurrentCount,
|
|
dsx3CurrentLCVs PerfCurrentCount,
|
|
|
|
dsx3CurrentPCVs PerfCurrentCount,
|
|
dsx3CurrentLESs PerfCurrentCount,
|
|
dsx3CurrentCCVs PerfCurrentCount,
|
|
dsx3CurrentCESs PerfCurrentCount,
|
|
dsx3CurrentCSESs PerfCurrentCount
|
|
}
|
|
|
|
dsx3CurrentIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the
|
|
DS3/E3 interface to which this entry is
|
|
applicable. The interface identified by a
|
|
particular value of this index is the same
|
|
interface as identified by the same value an
|
|
dsx3LineIndex object instance."
|
|
::= { dsx3CurrentEntry 1 }
|
|
|
|
dsx3CurrentPESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of P-bit
|
|
Errored Seconds."
|
|
::= { dsx3CurrentEntry 2 }
|
|
|
|
dsx3CurrentPSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of P-bit
|
|
Severely Errored Seconds."
|
|
::= { dsx3CurrentEntry 3 }
|
|
|
|
dsx3CurrentSEFSs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Framing Seconds."
|
|
::= { dsx3CurrentEntry 4 }
|
|
|
|
dsx3CurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Unavailable Seconds."
|
|
::= { dsx3CurrentEntry 5 }
|
|
|
|
dsx3CurrentLCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Line
|
|
Coding Violations."
|
|
::= { dsx3CurrentEntry 6 }
|
|
|
|
dsx3CurrentPCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of P-bit
|
|
Coding Violations."
|
|
::= { dsx3CurrentEntry 7 }
|
|
|
|
dsx3CurrentLESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Line Errored Seconds."
|
|
::= { dsx3CurrentEntry 8 }
|
|
|
|
dsx3CurrentCCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of C-bit Coding Violations."
|
|
::= { dsx3CurrentEntry 9 }
|
|
|
|
dsx3CurrentCESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The number of C-bit Errored Seconds."
|
|
::= { dsx3CurrentEntry 10 }
|
|
|
|
dsx3CurrentCSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of C-bit Severely Errored Seconds."
|
|
::= { dsx3CurrentEntry 11 }
|
|
|
|
-- the DS3/E3 Interval Table
|
|
|
|
dsx3IntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx3IntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS3/E3 Interval Table contains various
|
|
statistics collected by each DS3/E3 Interface over
|
|
the previous 24 hours of operation. The past 24
|
|
hours are broken into 96 completed 15 minute
|
|
intervals. Each row in this table represents one
|
|
such interval (identified by dsx3IntervalNumber)
|
|
and for one specific interface (identified by
|
|
dsx3IntervalIndex)."
|
|
::= { ds3 7 }
|
|
|
|
dsx3IntervalEntry OBJECT-TYPE
|
|
SYNTAX Dsx3IntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS3/E3 Interval table."
|
|
INDEX { dsx3IntervalIndex, dsx3IntervalNumber }
|
|
::= { dsx3IntervalTable 1 }
|
|
|
|
Dsx3IntervalEntry ::=
|
|
SEQUENCE {
|
|
dsx3IntervalIndex InterfaceIndex,
|
|
dsx3IntervalNumber INTEGER,
|
|
dsx3IntervalPESs PerfIntervalCount,
|
|
dsx3IntervalPSESs PerfIntervalCount,
|
|
dsx3IntervalSEFSs PerfIntervalCount,
|
|
dsx3IntervalUASs PerfIntervalCount,
|
|
dsx3IntervalLCVs PerfIntervalCount,
|
|
dsx3IntervalPCVs PerfIntervalCount,
|
|
dsx3IntervalLESs PerfIntervalCount,
|
|
|
|
dsx3IntervalCCVs PerfIntervalCount,
|
|
dsx3IntervalCESs PerfIntervalCount,
|
|
dsx3IntervalCSESs PerfIntervalCount,
|
|
dsx3IntervalValidData TruthValue
|
|
}
|
|
|
|
dsx3IntervalIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the
|
|
DS3/E3 interface to which this entry is
|
|
applicable. The interface identified by a
|
|
particular value of this index is the same
|
|
interface as identified by the same value an
|
|
dsx3LineIndex object instance."
|
|
::= { dsx3IntervalEntry 1 }
|
|
|
|
dsx3IntervalNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..96)
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, where 1 is the most
|
|
recently completed 15 minute interval and 96 is
|
|
the 15 minutes interval completed 23 hours and 45
|
|
minutes prior to interval 1."
|
|
::= { dsx3IntervalEntry 2 }
|
|
|
|
dsx3IntervalPESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of P-bit
|
|
Errored Seconds."
|
|
::= { dsx3IntervalEntry 3 }
|
|
|
|
dsx3IntervalPSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of P-bit
|
|
Severely Errored Seconds."
|
|
::= { dsx3IntervalEntry 4 }
|
|
|
|
dsx3IntervalSEFSs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Framing Seconds."
|
|
::= { dsx3IntervalEntry 5 }
|
|
|
|
dsx3IntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Unavailable Seconds. This object may decrease if
|
|
the occurrence of unavailable seconds occurs across
|
|
an interval boundary."
|
|
::= { dsx3IntervalEntry 6 }
|
|
|
|
dsx3IntervalLCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Line
|
|
Coding Violations."
|
|
::= { dsx3IntervalEntry 7 }
|
|
|
|
dsx3IntervalPCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of P-bit
|
|
Coding Violations."
|
|
::= { dsx3IntervalEntry 8 }
|
|
|
|
dsx3IntervalLESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Line Errored Seconds (BPVs or
|
|
illegal zero sequences)."
|
|
::= { dsx3IntervalEntry 9 }
|
|
|
|
dsx3IntervalCCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of C-bit Coding Violations."
|
|
::= { dsx3IntervalEntry 10 }
|
|
|
|
dsx3IntervalCESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of C-bit Errored Seconds."
|
|
::= { dsx3IntervalEntry 11 }
|
|
|
|
dsx3IntervalCSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of C-bit Severely Errored Seconds."
|
|
::= { dsx3IntervalEntry 12 }
|
|
|
|
dsx3IntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { dsx3IntervalEntry 13 }
|
|
|
|
-- the DS3/E3 Total
|
|
|
|
dsx3TotalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx3TotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS3/E3 Total Table contains the cumulative
|
|
sum of the various statistics for the 24 hour
|
|
period preceding the current interval."
|
|
::= { ds3 8 }
|
|
|
|
dsx3TotalEntry OBJECT-TYPE
|
|
SYNTAX Dsx3TotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS3/E3 Total table."
|
|
INDEX { dsx3TotalIndex }
|
|
::= { dsx3TotalTable 1 }
|
|
|
|
Dsx3TotalEntry ::=
|
|
SEQUENCE {
|
|
dsx3TotalIndex InterfaceIndex,
|
|
dsx3TotalPESs PerfTotalCount,
|
|
dsx3TotalPSESs PerfTotalCount,
|
|
dsx3TotalSEFSs PerfTotalCount,
|
|
dsx3TotalUASs PerfTotalCount,
|
|
dsx3TotalLCVs PerfTotalCount,
|
|
dsx3TotalPCVs PerfTotalCount,
|
|
dsx3TotalLESs PerfTotalCount,
|
|
dsx3TotalCCVs PerfTotalCount,
|
|
dsx3TotalCESs PerfTotalCount,
|
|
dsx3TotalCSESs PerfTotalCount
|
|
}
|
|
|
|
dsx3TotalIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the
|
|
DS3/E3 interface to which this entry is
|
|
applicable. The interface identified by a
|
|
particular value of this index is the same
|
|
interface as identified by the same value an
|
|
dsx3LineIndex object instance."
|
|
::= { dsx3TotalEntry 1 }
|
|
|
|
dsx3TotalPESs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of P-bit
|
|
Errored Seconds, encountered by a DS3 interface in
|
|
the previous 24 hour interval. Invalid 15 minute
|
|
intervals count as 0."
|
|
::= { dsx3TotalEntry 2 }
|
|
|
|
dsx3TotalPSESs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of P-bit
|
|
Severely Errored Seconds, encountered by a DS3
|
|
interface in the previous 24 hour interval.
|
|
Invalid 15 minute intervals count as 0."
|
|
::= { dsx3TotalEntry 3 }
|
|
|
|
dsx3TotalSEFSs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Framing Seconds, encountered by a
|
|
DS3/E3 interface in the previous 24 hour interval.
|
|
Invalid 15 minute intervals count as 0."
|
|
::= { dsx3TotalEntry 4 }
|
|
|
|
dsx3TotalUASs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Unavailable Seconds, encountered by a DS3
|
|
interface in the previous 24 hour interval.
|
|
Invalid 15 minute intervals count as 0."
|
|
::= { dsx3TotalEntry 5 }
|
|
|
|
dsx3TotalLCVs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Line
|
|
Coding Violations encountered by a DS3/E3
|
|
interface in the previous 24 hour interval.
|
|
Invalid 15 minute intervals count as 0."
|
|
::= { dsx3TotalEntry 6 }
|
|
|
|
dsx3TotalPCVs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of P-bit
|
|
|
|
Coding Violations, encountered by a DS3 interface
|
|
in the previous 24 hour interval. Invalid 15
|
|
minute intervals count as 0."
|
|
::= { dsx3TotalEntry 7 }
|
|
|
|
dsx3TotalLESs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Line Errored Seconds (BPVs or
|
|
illegal zero sequences) encountered by a DS3/E3
|
|
interface in the previous 24 hour interval.
|
|
Invalid 15 minute intervals count as 0."
|
|
::= { dsx3TotalEntry 8 }
|
|
|
|
dsx3TotalCCVs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of C-bit Coding Violations encountered
|
|
by a DS3 interface in the previous 24 hour
|
|
interval. Invalid 15 minute intervals count as 0."
|
|
::= { dsx3TotalEntry 9 }
|
|
|
|
dsx3TotalCESs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of C-bit Errored Seconds encountered
|
|
by a DS3 interface in the previous 24 hour
|
|
interval. Invalid 15 minute intervals count as 0."
|
|
::= { dsx3TotalEntry 10 }
|
|
|
|
dsx3TotalCSESs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of C-bit Severely Errored Seconds
|
|
encountered by a DS3 interface in the previous 24
|
|
hour interval. Invalid 15 minute intervals count
|
|
as 0."
|
|
::= { dsx3TotalEntry 11 }
|
|
|
|
-- The DS3 Far End Group
|
|
|
|
-- The DS3 Far End Group consists of four tables :
|
|
-- DS3 Far End Configuration
|
|
-- DS3 Far End Current
|
|
-- DS3 Far End Interval
|
|
-- DS3 Far End Total
|
|
|
|
-- The DS3 Far End Configuration Table
|
|
|
|
dsx3FarEndConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx3FarEndConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS3 Far End Configuration Table contains
|
|
configuration information reported in the C-bits
|
|
from the remote end."
|
|
::= { ds3 9 }
|
|
|
|
dsx3FarEndConfigEntry OBJECT-TYPE
|
|
SYNTAX Dsx3FarEndConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS3 Far End Configuration table."
|
|
INDEX { dsx3FarEndLineIndex }
|
|
::= { dsx3FarEndConfigTable 1 }
|
|
|
|
Dsx3FarEndConfigEntry ::=
|
|
SEQUENCE {
|
|
dsx3FarEndLineIndex InterfaceIndex,
|
|
dsx3FarEndEquipCode DisplayString,
|
|
dsx3FarEndLocationIDCode DisplayString,
|
|
dsx3FarEndFrameIDCode DisplayString,
|
|
dsx3FarEndUnitCode DisplayString,
|
|
dsx3FarEndFacilityIDCode DisplayString
|
|
}
|
|
|
|
dsx3FarEndLineIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the DS3
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
|
|
index is the same interface as identified by the
|
|
same value an dsx3LineIndex object instance."
|
|
::= { dsx3FarEndConfigEntry 1 }
|
|
|
|
dsx3FarEndEquipCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Far End Equipment Identification code
|
|
that describes the specific piece of equipment.
|
|
It is sent within the Path Identification
|
|
Message."
|
|
::= { dsx3FarEndConfigEntry 2 }
|
|
|
|
dsx3FarEndLocationIDCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..11))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Far End Location Identification code
|
|
that describes the specific location of the
|
|
equipment. It is sent within the Path
|
|
Identification Message."
|
|
::= { dsx3FarEndConfigEntry 3 }
|
|
|
|
dsx3FarEndFrameIDCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Far End Frame Identification code
|
|
that identifies where the equipment is located
|
|
within a building at a given location. It is sent
|
|
within the Path Identification Message."
|
|
::= { dsx3FarEndConfigEntry 4 }
|
|
|
|
dsx3FarEndUnitCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Far End code that identifies the
|
|
equipment location within a bay. It is sent
|
|
within the Path Identification Message."
|
|
::= { dsx3FarEndConfigEntry 5 }
|
|
|
|
dsx3FarEndFacilityIDCode OBJECT-TYPE
|
|
|
|
SYNTAX DisplayString (SIZE (0..38))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This code identifies a specific Far End DS3 path.
|
|
It is sent within the Path Identification
|
|
Message."
|
|
::= { dsx3FarEndConfigEntry 6 }
|
|
|
|
-- The DS3 Far End Current
|
|
|
|
dsx3FarEndCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx3FarEndCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS3 Far End Current table contains various
|
|
statistics being collected for the current 15
|
|
minute interval. The statistics are collected
|
|
from the far end block error code within the C-
|
|
bits."
|
|
::= { ds3 10 }
|
|
|
|
dsx3FarEndCurrentEntry OBJECT-TYPE
|
|
SYNTAX Dsx3FarEndCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS3 Far End Current table."
|
|
INDEX { dsx3FarEndCurrentIndex }
|
|
::= { dsx3FarEndCurrentTable 1 }
|
|
|
|
Dsx3FarEndCurrentEntry ::=
|
|
SEQUENCE {
|
|
dsx3FarEndCurrentIndex InterfaceIndex,
|
|
dsx3FarEndTimeElapsed INTEGER,
|
|
dsx3FarEndValidIntervals INTEGER,
|
|
dsx3FarEndCurrentCESs PerfCurrentCount,
|
|
dsx3FarEndCurrentCSESs PerfCurrentCount,
|
|
dsx3FarEndCurrentCCVs PerfCurrentCount,
|
|
dsx3FarEndCurrentUASs PerfCurrentCount,
|
|
dsx3FarEndInvalidIntervals INTEGER
|
|
}
|
|
|
|
dsx3FarEndCurrentIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the DS3
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
index is identical to the interface identified by
|
|
the same value of dsx3LineIndex."
|
|
::= { dsx3FarEndCurrentEntry 1 }
|
|
|
|
dsx3FarEndTimeElapsed OBJECT-TYPE
|
|
SYNTAX INTEGER (0..899)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that have elapsed since the
|
|
beginning of the far end current error-measurement
|
|
period. If, for some reason, such as an adjustment
|
|
in the system's time-of-day clock, the current
|
|
interval exceeds the maximum value, the agent will
|
|
return the maximum value."
|
|
::= { dsx3FarEndCurrentEntry 2 }
|
|
|
|
dsx3FarEndValidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous far end intervals for
|
|
which data was collected. The value will be 96
|
|
unless the interface was brought online within the
|
|
last 24 hours, in which case the value will be the
|
|
number of complete 15 minute far end intervals
|
|
since the interface has been online. In the case
|
|
where the agent is a proxy, it is possible that
|
|
some intervals are unavailable. In this case,
|
|
this interval is the maximum interval number for
|
|
which data is available."
|
|
::= { dsx3FarEndCurrentEntry 3 }
|
|
|
|
dsx3FarEndCurrentCESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far End
|
|
C-bit Errored Seconds."
|
|
::= { dsx3FarEndCurrentEntry 4 }
|
|
|
|
dsx3FarEndCurrentCSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far End
|
|
C-bit Severely Errored Seconds."
|
|
::= { dsx3FarEndCurrentEntry 5 }
|
|
|
|
dsx3FarEndCurrentCCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far End
|
|
C-bit Coding Violations reported via the far end
|
|
block error count."
|
|
::= { dsx3FarEndCurrentEntry 6 }
|
|
|
|
dsx3FarEndCurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far End
|
|
unavailable seconds."
|
|
::= { dsx3FarEndCurrentEntry 7 }
|
|
|
|
dsx3FarEndInvalidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The number of intervals in the range from 0 to
|
|
dsx3FarEndValidIntervals for which no data is
|
|
available. This object will typically be zero
|
|
except in cases where the data for some intervals
|
|
are not available (e.g., in proxy situations)."
|
|
::= { dsx3FarEndCurrentEntry 8 }
|
|
|
|
-- The DS3 Far End Interval Table
|
|
|
|
dsx3FarEndIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx3FarEndIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS3 Far End Interval Table contains various
|
|
|
|
statistics collected by each DS3 interface over
|
|
the previous 24 hours of operation. The past 24
|
|
hours are broken into 96 completed 15 minute
|
|
intervals."
|
|
::= { ds3 11 }
|
|
|
|
dsx3FarEndIntervalEntry OBJECT-TYPE
|
|
SYNTAX Dsx3FarEndIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS3 Far End Interval table."
|
|
INDEX { dsx3FarEndIntervalIndex,
|
|
dsx3FarEndIntervalNumber }
|
|
::= { dsx3FarEndIntervalTable 1 }
|
|
|
|
Dsx3FarEndIntervalEntry ::=
|
|
SEQUENCE {
|
|
dsx3FarEndIntervalIndex InterfaceIndex,
|
|
dsx3FarEndIntervalNumber INTEGER,
|
|
dsx3FarEndIntervalCESs PerfIntervalCount,
|
|
dsx3FarEndIntervalCSESs PerfIntervalCount,
|
|
dsx3FarEndIntervalCCVs PerfIntervalCount,
|
|
dsx3FarEndIntervalUASs PerfIntervalCount,
|
|
dsx3FarEndIntervalValidData TruthValue
|
|
}
|
|
|
|
dsx3FarEndIntervalIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the DS3
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
index is identical to the interface identified by
|
|
the same value of dsx3LineIndex."
|
|
::= { dsx3FarEndIntervalEntry 1 }
|
|
|
|
dsx3FarEndIntervalNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..96)
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, where 1 is the most
|
|
recently completed 15 minute interval and 96 is
|
|
|
|
the 15 minutes interval completed 23 hours and 45
|
|
minutes prior to interval 1."
|
|
::= { dsx3FarEndIntervalEntry 2 }
|
|
|
|
dsx3FarEndIntervalCESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far End
|
|
C-bit Errored Seconds encountered by a DS3
|
|
interface in one of the previous 96, individual 15
|
|
minute, intervals. In the case where the agent is
|
|
a proxy and data is not available, return
|
|
noSuchInstance."
|
|
::= { dsx3FarEndIntervalEntry 3 }
|
|
|
|
dsx3FarEndIntervalCSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far End
|
|
C-bit Severely Errored Seconds."
|
|
::= { dsx3FarEndIntervalEntry 4 }
|
|
|
|
dsx3FarEndIntervalCCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far End
|
|
C-bit Coding Violations reported via the far end
|
|
block error count."
|
|
::= { dsx3FarEndIntervalEntry 5 }
|
|
|
|
dsx3FarEndIntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far End
|
|
unavailable seconds."
|
|
::= { dsx3FarEndIntervalEntry 6 }
|
|
|
|
dsx3FarEndIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { dsx3FarEndIntervalEntry 7 }
|
|
|
|
-- The DS3 Far End Total
|
|
|
|
dsx3FarEndTotalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx3FarEndTotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS3 Far End Total Table contains the
|
|
cumulative sum of the various statistics for the
|
|
24 hour period preceding the current interval."
|
|
::= { ds3 12 }
|
|
|
|
dsx3FarEndTotalEntry OBJECT-TYPE
|
|
SYNTAX Dsx3FarEndTotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS3 Far End Total table."
|
|
INDEX { dsx3FarEndTotalIndex }
|
|
::= { dsx3FarEndTotalTable 1 }
|
|
|
|
Dsx3FarEndTotalEntry ::=
|
|
SEQUENCE {
|
|
dsx3FarEndTotalIndex InterfaceIndex,
|
|
dsx3FarEndTotalCESs PerfTotalCount,
|
|
dsx3FarEndTotalCSESs PerfTotalCount,
|
|
dsx3FarEndTotalCCVs PerfTotalCount,
|
|
dsx3FarEndTotalUASs PerfTotalCount
|
|
}
|
|
|
|
dsx3FarEndTotalIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the DS3
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
index is identical to the interface identified by
|
|
the same value of dsx3LineIndex."
|
|
::= { dsx3FarEndTotalEntry 1 }
|
|
|
|
dsx3FarEndTotalCESs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far End
|
|
C-bit Errored Seconds encountered by a DS3
|
|
interface in the previous 24 hour interval.
|
|
Invalid 15 minute intervals count as 0."
|
|
::= { dsx3FarEndTotalEntry 2 }
|
|
|
|
dsx3FarEndTotalCSESs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far End
|
|
C-bit Severely Errored Seconds encountered by a
|
|
DS3 interface in the previous 24 hour interval.
|
|
Invalid 15 minute intervals count as 0."
|
|
::= { dsx3FarEndTotalEntry 3 }
|
|
|
|
dsx3FarEndTotalCCVs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far End
|
|
C-bit Coding Violations reported via the far end
|
|
block error count encountered by a DS3 interface
|
|
in the previous 24 hour interval. Invalid 15
|
|
minute intervals count as 0."
|
|
::= { dsx3FarEndTotalEntry 4 }
|
|
|
|
dsx3FarEndTotalUASs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far End
|
|
unavailable seconds encountered by a DS3 interface
|
|
in the previous 24 hour interval. Invalid 15
|
|
minute intervals count as 0."
|
|
::= { dsx3FarEndTotalEntry 5 }
|
|
|
|
-- the DS3/E3 Fractional Table
|
|
|
|
-- This table is deprecated.
|
|
|
|
dsx3FracTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx3FracEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This table is deprecated in favour of using
|
|
ifStackTable.
|
|
|
|
Implementation of this table was optional. It was
|
|
designed for those systems dividing a DS3/E3 into
|
|
channels containing different data streams that
|
|
are of local interest.
|
|
|
|
The DS3/E3 fractional table identifies which
|
|
DS3/E3 channels associated with a CSU are being
|
|
used to support a logical interface, i.e., an
|
|
entry in the interfaces table from the Internet-
|
|
standard MIB.
|
|
|
|
For example, consider a DS3 device with 4 high
|
|
speed links carrying router traffic, a feed for
|
|
voice, a feed for video, and a synchronous channel
|
|
for a non-routed protocol. We might describe the
|
|
allocation of channels, in the dsx3FracTable, as
|
|
follows:
|
|
dsx3FracIfIndex.2. 1 = 3 dsx3FracIfIndex.2.15 = 4
|
|
dsx3FracIfIndex.2. 2 = 3 dsx3FracIfIndex.2.16 = 6
|
|
dsx3FracIfIndex.2. 3 = 3 dsx3FracIfIndex.2.17 = 6
|
|
dsx3FracIfIndex.2. 4 = 3 dsx3FracIfIndex.2.18 = 6
|
|
dsx3FracIfIndex.2. 5 = 3 dsx3FracIfIndex.2.19 = 6
|
|
dsx3FracIfIndex.2. 6 = 3 dsx3FracIfIndex.2.20 = 6
|
|
dsx3FracIfIndex.2. 7 = 4 dsx3FracIfIndex.2.21 = 6
|
|
dsx3FracIfIndex.2. 8 = 4 dsx3FracIfIndex.2.22 = 6
|
|
dsx3FracIfIndex.2. 9 = 4 dsx3FracIfIndex.2.23 = 6
|
|
dsx3FracIfIndex.2.10 = 4 dsx3FracIfIndex.2.24 = 6
|
|
dsx3FracIfIndex.2.11 = 4 dsx3FracIfIndex.2.25 = 6
|
|
dsx3FracIfIndex.2.12 = 5 dsx3FracIfIndex.2.26 = 6
|
|
dsx3FracIfIndex.2.13 = 5 dsx3FracIfIndex.2.27 = 6
|
|
dsx3FracIfIndex.2.14 = 5 dsx3FracIfIndex.2.28 = 6
|
|
For dsx3M23, dsx3 SYNTRAN, dsx3CbitParity, and
|
|
dsx3ClearChannel there are 28 legal channels,
|
|
numbered 1 through 28.
|
|
|
|
For e3Framed there are 16 legal channels, numbered
|
|
1 through 16. The channels (1..16) correspond
|
|
directly to the equivalently numbered time-slots."
|
|
::= { ds3 13 }
|
|
|
|
dsx3FracEntry OBJECT-TYPE
|
|
SYNTAX Dsx3FracEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An entry in the DS3 Fractional table."
|
|
INDEX { dsx3FracIndex, dsx3FracNumber }
|
|
::= { dsx3FracTable 1 }
|
|
|
|
Dsx3FracEntry ::=
|
|
SEQUENCE {
|
|
dsx3FracIndex INTEGER,
|
|
dsx3FracNumber INTEGER,
|
|
dsx3FracIfIndex INTEGER
|
|
}
|
|
|
|
dsx3FracIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'7fffffff'h)
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the
|
|
DS3 interface to which this entry is applicable
|
|
The interface identified by a particular value
|
|
of this index is the same interface as
|
|
identified by the same value an dsx3LineIndex
|
|
object instance."
|
|
::= { dsx3FracEntry 1 }
|
|
|
|
dsx3FracNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..31)
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The channel number for this entry."
|
|
::= { dsx3FracEntry 2 }
|
|
|
|
dsx3FracIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..'7fffffff'h)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An index value that uniquely identifies an
|
|
interface. The interface identified by a
|
|
particular value of this index is the same
|
|
interface as identified by the same value an
|
|
ifIndex object instance. If no interface is
|
|
currently using a channel, the value should be
|
|
zero. If a single interface occupies more than
|
|
one time slot, that ifIndex value will be found
|
|
in multiple time slots."
|
|
::= { dsx3FracEntry 3 }
|
|
|
|
-- DS3 TRAPS
|
|
|
|
ds3Traps OBJECT IDENTIFIER ::= { ds3 15 }
|
|
|
|
dsx3LineStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { dsx3LineStatus,
|
|
dsx3LineStatusLastChange }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A dsx3LineStatusChange trap is sent when the
|
|
value of an instance of dsx3LineStatus changes. It
|
|
can be utilized by an NMS to trigger polls. When
|
|
the line status change results in a lower level
|
|
line status change (i.e., ds1), then no traps for
|
|
the lower level are sent."
|
|
::= { ds3Traps 0 1 }
|
|
|
|
-- conformance information
|
|
|
|
ds3Conformance OBJECT IDENTIFIER ::= { ds3 14 }
|
|
ds3Groups OBJECT IDENTIFIER ::= { ds3Conformance 1 }
|
|
ds3Compliances OBJECT IDENTIFIER ::= { ds3Conformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
ds3Compliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for DS3/E3 interfaces."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ds3NearEndConfigGroup,
|
|
ds3NearEndStatisticsGroup }
|
|
GROUP ds3FarEndGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
systems that attach to a DS3 Interface. However,
|
|
only C-bit Parity and SYNTRAN DS3 applications
|
|
have the capability (option) of providing this
|
|
information."
|
|
GROUP ds3NearEndOptionalTrapGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
systems that attach to a DS3 Interface. If it is
|
|
implemented then ds3NearEndOptionalConfigGroup
|
|
should also be implemented."
|
|
GROUP ds3NearEndOptionalConfigGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
systems that attach to a DS3 interface."
|
|
|
|
OBJECT dsx3LineType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access for the line type is not required."
|
|
|
|
OBJECT dsx3LineCoding
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access for the line coding is not
|
|
required."
|
|
|
|
OBJECT dsx3SendCode
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access for the send code is not required."
|
|
|
|
OBJECT dsx3LoopbackConfig
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access for loopbacks is not required."
|
|
|
|
OBJECT dsx3TransmitClockSource
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access for the transmit clock source is not
|
|
required."
|
|
|
|
OBJECT dsx3LineLength
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access for the line length is not
|
|
required."
|
|
|
|
OBJECT dsx3Channelization
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access for the channelization is not
|
|
required."
|
|
|
|
::= { ds3Compliances 1 }
|
|
|
|
-- units of conformance
|
|
|
|
ds3NearEndConfigGroup OBJECT-GROUP
|
|
OBJECTS { dsx3LineIndex,
|
|
dsx3TimeElapsed,
|
|
dsx3ValidIntervals,
|
|
dsx3LineType,
|
|
dsx3LineCoding,
|
|
dsx3SendCode,
|
|
dsx3CircuitIdentifier,
|
|
dsx3LoopbackConfig,
|
|
dsx3LineStatus,
|
|
dsx3TransmitClockSource,
|
|
dsx3InvalidIntervals,
|
|
dsx3LineLength,
|
|
dsx3LoopbackStatus,
|
|
dsx3Channelization,
|
|
dsx3Ds1ForRemoteLoop}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing configuration
|
|
information applicable to all DS3/E3 interfaces."
|
|
::= { ds3Groups 1 }
|
|
|
|
ds3NearEndStatisticsGroup OBJECT-GROUP
|
|
OBJECTS { dsx3CurrentIndex,
|
|
dsx3CurrentPESs,
|
|
dsx3CurrentPSESs,
|
|
dsx3CurrentSEFSs,
|
|
dsx3CurrentUASs,
|
|
dsx3CurrentLCVs,
|
|
dsx3CurrentPCVs,
|
|
dsx3CurrentLESs,
|
|
dsx3CurrentCCVs,
|
|
dsx3CurrentCESs,
|
|
dsx3CurrentCSESs,
|
|
dsx3IntervalIndex,
|
|
dsx3IntervalNumber,
|
|
dsx3IntervalPESs,
|
|
dsx3IntervalPSESs,
|
|
dsx3IntervalSEFSs,
|
|
dsx3IntervalUASs,
|
|
dsx3IntervalLCVs,
|
|
dsx3IntervalPCVs,
|
|
dsx3IntervalLESs,
|
|
dsx3IntervalCCVs,
|
|
dsx3IntervalCESs,
|
|
dsx3IntervalCSESs,
|
|
dsx3IntervalValidData,
|
|
dsx3TotalIndex,
|
|
dsx3TotalPESs,
|
|
dsx3TotalPSESs,
|
|
dsx3TotalSEFSs,
|
|
dsx3TotalUASs,
|
|
dsx3TotalLCVs,
|
|
dsx3TotalPCVs,
|
|
dsx3TotalLESs,
|
|
dsx3TotalCCVs,
|
|
dsx3TotalCESs,
|
|
dsx3TotalCSESs }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing statistics
|
|
information applicable to all DS3/E3 interfaces."
|
|
::= { ds3Groups 2 }
|
|
|
|
ds3FarEndGroup OBJECT-GROUP
|
|
OBJECTS { dsx3FarEndLineIndex,
|
|
dsx3FarEndEquipCode,
|
|
dsx3FarEndLocationIDCode,
|
|
dsx3FarEndFrameIDCode,
|
|
dsx3FarEndUnitCode,
|
|
dsx3FarEndFacilityIDCode,
|
|
dsx3FarEndCurrentIndex,
|
|
dsx3FarEndTimeElapsed,
|
|
dsx3FarEndValidIntervals,
|
|
dsx3FarEndCurrentCESs,
|
|
dsx3FarEndCurrentCSESs,
|
|
dsx3FarEndCurrentCCVs,
|
|
dsx3FarEndCurrentUASs,
|
|
dsx3FarEndInvalidIntervals,
|
|
dsx3FarEndIntervalIndex,
|
|
dsx3FarEndIntervalNumber,
|
|
dsx3FarEndIntervalCESs,
|
|
dsx3FarEndIntervalCSESs,
|
|
dsx3FarEndIntervalCCVs,
|
|
dsx3FarEndIntervalUASs,
|
|
dsx3FarEndIntervalValidData,
|
|
dsx3FarEndTotalIndex,
|
|
dsx3FarEndTotalCESs,
|
|
dsx3FarEndTotalCSESs,
|
|
dsx3FarEndTotalCCVs,
|
|
dsx3FarEndTotalUASs }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing remote
|
|
configuration and statistics information
|
|
applicable to C-bit Parity and SYNTRAN DS3
|
|
interfaces."
|
|
::= { ds3Groups 3 }
|
|
|
|
ds3DeprecatedGroup OBJECT-GROUP
|
|
OBJECTS { dsx3IfIndex,
|
|
dsx3FracIndex,
|
|
dsx3FracNumber,
|
|
dsx3FracIfIndex }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of obsolete objects that may be
|
|
implemented for backwards compatibility."
|
|
::= { ds3Groups 4 }
|
|
|
|
ds3NearEndOptionalConfigGroup OBJECT-GROUP
|
|
OBJECTS { dsx3LineStatusLastChange,
|
|
dsx3LineStatusChangeTrapEnable }
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that may be implemented
|
|
on DS3/E3 interfaces."
|
|
::= { ds3Groups 5 }
|
|
|
|
ds3NearEndOptionalTrapGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { dsx3LineStatusChange }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of notifications that may be
|
|
implemented on DS3/E3 interfaces."
|
|
::= { ds3Groups 6 }
|
|
|
|
END
|