mirror of
https://github.com/librenms/librenms.git
synced 2024-09-22 02:48:37 +00:00
6b9d05653c
git-svn-id: http://www.observium.org/svn/observer/trunk@1569 61d68cd4-352d-0410-923a-c4978735b2b8
1077 lines
38 KiB
Plaintext
1077 lines
38 KiB
Plaintext
ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- enterasys-ietf-bridge-mib-ext-mib.txt
|
|
--
|
|
-- Part Number:
|
|
--
|
|
--
|
|
|
|
-- This module provides authoritative definitions for Enterasys
|
|
-- Networks' IETF BRIDGE-MIB extension MIB.
|
|
|
|
--
|
|
-- This module will be extended, as needed.
|
|
|
|
-- Enterasys Networks reserves the right to make changes in this
|
|
-- specification and other information contained in this document
|
|
-- without prior notice. The reader should consult Enterasys Networks
|
|
-- to determine whether any such changes have been made.
|
|
--
|
|
-- In no event shall Enterasys Networks be liable for any incidental,
|
|
-- indirect, special, or consequential damages whatsoever (including
|
|
-- but not limited to lost profits) arising out of or related to this
|
|
-- document or the information contained in it, even if Enterasys
|
|
-- Networks has been advised of, known, or should have known, the
|
|
-- possibility of such damages.
|
|
--
|
|
-- Enterasys Networks grants vendors, end-users, and other interested
|
|
-- parties a non-exclusive license to use this Specification in
|
|
-- connection with the management of Enterasys Networks products.
|
|
|
|
-- Copyright 2002-2007 Enterasys Networks, Inc.
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
dot1dStpPort, dot1dStpPortEntry, dot1dStpDesignatedRoot,
|
|
dot1dBasePort, dot1dBasePortEntry, dot1dBasePortIfIndex,
|
|
dot1dBaseBridgeAddress
|
|
FROM BRIDGE-MIB
|
|
EnabledStatus
|
|
FROM P-BRIDGE-MIB
|
|
dot1qTpFdbPort
|
|
FROM Q-BRIDGE-MIB
|
|
etsysModules
|
|
FROM ENTERASYS-MIB-NAMES;
|
|
|
|
etsysIetfBridgeMibExtMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200707311819Z" -- Tue Jul 31 18:19 UTC 2007
|
|
ORGANIZATION "Enterasys Networks, Inc"
|
|
CONTACT-INFO
|
|
"Postal: Enterasys Networks
|
|
50 Minuteman Rd.
|
|
Andover, MA 01810-1008
|
|
USA
|
|
Phone: +1 978 684 1000
|
|
E-mail: support@enterasys.com
|
|
WWW: http://www.enterasys.com"
|
|
|
|
DESCRIPTION
|
|
"This MIB module defines a portion of the SNMP enterprise
|
|
MIBs under Enterasys Networks' enterprise OID pertaining to
|
|
proprietary extensions to the IETF BRIDGE-MIB as specified
|
|
in RFC1493."
|
|
|
|
REVISION "200707311819Z" -- Tue Jul 31 18:19 UTC 2007
|
|
DESCRIPTION
|
|
"Added IMPORT of Unsigned32."
|
|
|
|
REVISION "200703212102Z" -- Wed Mar 21 21:02 GMT 2007
|
|
DESCRIPTION
|
|
"Added an additional scalar:
|
|
etsysIetfBridgeDot1qStaticUcastAsMcast, which is intended to
|
|
modify the behavior of the filter-database lookup, specifically
|
|
how static multicast entries in the database may be matched."
|
|
|
|
REVISION "200611091637Z" -- Thu Nov 9 16:37 GMT 2006
|
|
DESCRIPTION
|
|
"Added a 'link partner capable' object for the Loop
|
|
Protect feature. Recast the 'CIST error conditions'
|
|
object as the 'CIST non-forwarding reason' object.
|
|
Specified suitable default values for all Loop
|
|
Protect configuration objects."
|
|
|
|
REVISION "200610041951Z" -- Wed Oct 4 19:51 GMT 2006
|
|
DESCRIPTION
|
|
"Addition of objects for configuring the Loop Protect
|
|
feature on the CIST, and an object for summarizing
|
|
Spanning Tree error conditions on the CIST."
|
|
|
|
REVISION "200411041447Z" -- Thu Nov 4 14:47 GMT 2004
|
|
DESCRIPTION
|
|
"Addition of a moved address notification, an object
|
|
to globally enable/disable this notification, and a
|
|
port level control for this notification."
|
|
|
|
REVISION "200405281508Z" -- Fri May 28 15:08 GMT 2004
|
|
DESCRIPTION
|
|
"Changed the etsysIetfBridgeDot1dStpNewRootTrapEnable object
|
|
syntax to EnabledStatus and removed the reference to
|
|
edgePortDisabled(3) from the description clause."
|
|
|
|
REVISION "200404082004Z" -- Thu Apr 8 20:04 GMT 2004
|
|
DESCRIPTION
|
|
"Changed the description clause for the
|
|
etsysIetfBridgeDot1dStpBackupRootEnable object to limit its
|
|
effect to the Common and Internal Spanning Tree."
|
|
|
|
REVISION "200403041939Z" -- Thu Mar 4 19:39 GMT 2004
|
|
DESCRIPTION
|
|
"Addition of the etsysIetfBridgeDot1dStpPortCistRoleValue
|
|
object."
|
|
|
|
REVISION "200403012229Z" -- Mon Mar 1 22:29 GMT 2004
|
|
DESCRIPTION
|
|
"Addition of objects for the SpanGuard and Backup Root
|
|
features, and an object for legacy bridge priorities."
|
|
|
|
REVISION "200311141831Z" -- Fri Nov 14 18:31 GMT 2003
|
|
DESCRIPTION
|
|
"Addition of a port level control for the new learned address
|
|
notification and modifications to the descriptions for the
|
|
associated objects."
|
|
|
|
REVISION "200306191936Z" -- Thu Jun 19 19:36 GMT 2003
|
|
DESCRIPTION
|
|
"Addition of a new address notification and an object to
|
|
enable/disable this notification."
|
|
|
|
REVISION "200212132120Z" -- Fri Dec 13 21:20 GMT 2002
|
|
DESCRIPTION
|
|
"The initial version of this MIB module"
|
|
|
|
::= { etsysModules 31 }
|
|
|
|
etsysIetfBridgeMibExt
|
|
OBJECT IDENTIFIER ::= { etsysIetfBridgeMibExtMIB 1 }
|
|
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- branches in the ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB
|
|
-- ---------------------------------------------------------- --
|
|
|
|
etsysIetfBridgeDot1dStp OBJECT IDENTIFIER
|
|
::= { etsysIetfBridgeMibExt 1 }
|
|
|
|
etsysIetfBridgeDot1dBase OBJECT IDENTIFIER
|
|
::= { etsysIetfBridgeMibExt 2 }
|
|
|
|
etsysIetfBridgeDot1qBase OBJECT IDENTIFIER
|
|
::= { etsysIetfBridgeMibExt 3 }
|
|
|
|
etsysIetfBridgeDot1dSpanGuard OBJECT IDENTIFIER
|
|
::= { etsysIetfBridgeMibExt 4 }
|
|
|
|
etsysIetfBridgeDot1dBackupRoot OBJECT IDENTIFIER
|
|
::= { etsysIetfBridgeMibExt 5 }
|
|
|
|
etsysIetfBridgeDot1dLoopProtect OBJECT IDENTIFIER
|
|
::= { etsysIetfBridgeMibExt 6 }
|
|
|
|
etsysIetfBridgeDot1Notifications OBJECT IDENTIFIER
|
|
::= { etsysIetfBridgeMibExt 0 }
|
|
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- Extensions to the Spanning Tree Port Table
|
|
-- ---------------------------------------------------------- --
|
|
|
|
etsysIetfBridgeDot1dStpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysIetfBridgeDot1dStpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Extensions to the table that contains port-specific
|
|
information for the Spanning Tree Protocol."
|
|
::= { etsysIetfBridgeDot1dStp 1 }
|
|
|
|
etsysIetfBridgeDot1dStpPortEntry OBJECT-TYPE
|
|
SYNTAX EtsysIetfBridgeDot1dStpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of extensions to the information maintained
|
|
by every port about the Spanning Tree Protocol state
|
|
for that port."
|
|
AUGMENTS { dot1dStpPortEntry }
|
|
::= { etsysIetfBridgeDot1dStpPortTable 1 }
|
|
|
|
EtsysIetfBridgeDot1dStpPortEntry ::=
|
|
SEQUENCE {
|
|
etsysIetfBridgeDot1dStpPortStpEnable EnabledStatus,
|
|
etsysIetfBridgeDot1dStpPortSpanGuardBlocking TruthValue,
|
|
etsysIetfBridgeDot1dStpPortCistRoleValue INTEGER,
|
|
etsysIetfBridgeDot1dStpPortCistNonForwardingReason INTEGER
|
|
}
|
|
|
|
etsysIetfBridgeDot1dStpPortStpEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled/disabled status of the Spanning Tree
|
|
protocol on the port."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.2"
|
|
DEFVAL { enabled }
|
|
::= { etsysIetfBridgeDot1dStpPortEntry 1 }
|
|
|
|
etsysIetfBridgeDot1dStpPortSpanGuardBlocking OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the port with respect to the SpanGuard feature.
|
|
|
|
true(1) - this port is being held in the blocking state by
|
|
the SpanGuard feature.
|
|
|
|
false(2) - this port is not being held in the blocking state
|
|
by the SpanGuard feature.
|
|
|
|
When this object has a value of true(1) setting its value
|
|
to false(2) will cause the SpanGuard feature to no longer
|
|
hold the port in the blocking state.
|
|
|
|
All other set operations on this object are undefined and
|
|
MUST NOT have any affect."
|
|
DEFVAL { false }
|
|
::= { etsysIetfBridgeDot1dStpPortEntry 2 }
|
|
|
|
etsysIetfBridgeDot1dStpPortCistRoleValue OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
root(2),
|
|
designated(3),
|
|
alternate(4),
|
|
backUp(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates this port's role on the CIST.
|
|
|
|
disabled -- this port has no role on the CIST.
|
|
|
|
root -- this port has the role of root port on the CIST.
|
|
|
|
designated -- this port has the role of designated
|
|
port on the CIST.
|
|
|
|
alternate -- this port has the role of alternate port
|
|
on the CIST.
|
|
|
|
backUp -- this port has the role of backup port on the CIST."
|
|
::= { etsysIetfBridgeDot1dStpPortEntry 3 }
|
|
|
|
etsysIetfBridgeDot1dStpPortCistNonForwardingReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
disputed(2),
|
|
spanGuardLocked(3),
|
|
loopProtectEvent(4),
|
|
loopProtectAdvisory(5),
|
|
loopbackDetected(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the reason why this port has been placed in a
|
|
non-forwarding state on the CIST (other than as a result
|
|
of normal Spanning Tree protocol operation).
|
|
|
|
none(1) - the port has not been placed in a non-forwarding
|
|
state due to any exceptional condition.
|
|
|
|
disputed(2) - the port has been placed in listening state
|
|
because it has a designated role and an
|
|
inferior designated BPDU has been received.
|
|
|
|
spanGuardLocked(3) - the port has been placed in blocking
|
|
state because it is configured as an
|
|
admin edge port and a BPDU has been
|
|
received.
|
|
|
|
loopProtectEvent(4) - the port has been placed in listening
|
|
or blocking state because a BPDU
|
|
timeout has occurred and the port is
|
|
awaiting reception of a type 2 BPDU
|
|
on a point-to-point link.
|
|
|
|
loopProtectAdvisory(5) - the port has been placed in
|
|
listening state because a BPDU
|
|
timeout has occurred (as with a
|
|
Loop Protect event), but this
|
|
condition may be normal because
|
|
the link partner does not support
|
|
the Loop Protect feature.
|
|
|
|
loopbackDetected(6) - the port has been placed in blocking
|
|
state because a loopback condition
|
|
has been detected."
|
|
::= { etsysIetfBridgeDot1dStpPortEntry 4 }
|
|
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- Extensions to the dot1dStp group
|
|
-- ---------------------------------------------------------- --
|
|
|
|
etsysIetfBridgeDot1dStpTopChangeTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2),
|
|
edgePortDisabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled/disabled status of the Spanning Tree topology
|
|
change notification.
|
|
|
|
When this object is set to enabled(1) topology change
|
|
notifications SHOULD be generated by the agent.
|
|
|
|
When this object is set to disabled(2) topology change
|
|
notifications MUST NOT be generated by the agent.
|
|
|
|
When this object is set to edgePortDisabled(3) topology
|
|
change notifications MUST NOT be generated by the agent
|
|
for ports that are operating as edge ports, as specified
|
|
by dot1dStpPortOperEdgePort, and SHOULD be generated for
|
|
all other applicable ports."
|
|
DEFVAL { enabled }
|
|
::= { etsysIetfBridgeDot1dStp 2 }
|
|
|
|
etsysIetfBridgeDot1dStpNewRootTrapEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled/disabled status of the Spanning Tree new
|
|
root notification.
|
|
|
|
When this object is set to enabled(1) new root
|
|
notifications SHOULD be generated by the agent.
|
|
|
|
When this object is set to disabled(2) new root
|
|
notifications MUST NOT be generated by the agent."
|
|
DEFVAL { enabled }
|
|
::= { etsysIetfBridgeDot1dStp 3 }
|
|
|
|
etsysIetfBridgeDot1dStpBridgePriorityDefault OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stp8021d1998(1),
|
|
stp8021t2001(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of the Spanning Tree default Bridge Priority
|
|
that is to be used by this Bridge.
|
|
|
|
stp8021d1998(1) - indicates the use of Bridge Priority
|
|
as defined in IEEE Std. 802.1D-1998.
|
|
|
|
stp8021t2001(2) - indicates the use of Bridge Priority
|
|
as defined in IEEE Std. 802.1t."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998 & IEEE 802.1t"
|
|
::= { etsysIetfBridgeDot1dStp 4 }
|
|
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- Proprietary SpanGuard Feature
|
|
-- ---------------------------------------------------------- --
|
|
|
|
etsysIetfBridgeDot1dStpSpanGuardEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled/disabled status of the SpanGuard functionality."
|
|
DEFVAL { disabled }
|
|
::= { etsysIetfBridgeDot1dSpanGuard 1 }
|
|
|
|
etsysIetfBridgeDot1dStpSpanGuardTrapEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled/disabled status of the SpanGuard Port Blocking
|
|
trap."
|
|
DEFVAL { disabled }
|
|
::= { etsysIetfBridgeDot1dSpanGuard 2 }
|
|
|
|
etsysIetfBridgeDot1dStpSpanGuardBlockTime OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that a port will be held in the
|
|
blocking state by the SpanGuard feature. The value
|
|
zero indicates that ports will be held in the blocking
|
|
state until the entity is reset. Ports that are being
|
|
held in the blocking state can be returned to normal
|
|
service by writing the value of false(2) to their
|
|
respective etsysIetfBridgeDot1dBasePortSpanGuardBlocking
|
|
objects."
|
|
DEFVAL { 0 }
|
|
::= { etsysIetfBridgeDot1dSpanGuard 3 }
|
|
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- Proprietary Backup Root Feature
|
|
-- ---------------------------------------------------------- --
|
|
|
|
etsysIetfBridgeDot1dStpBackupRootEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled/disabled status of the Backup Root functionality
|
|
on the Common and Internal Spanning Tree."
|
|
DEFVAL { disabled }
|
|
::= { etsysIetfBridgeDot1dBackupRoot 1 }
|
|
|
|
etsysIetfBridgeDot1dStpBackupRootTrapEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled/disabled status of the Backup Root activation
|
|
trap."
|
|
DEFVAL { disabled }
|
|
::= { etsysIetfBridgeDot1dBackupRoot 2 }
|
|
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- Proprietary Loop Protect Feature
|
|
-- ---------------------------------------------------------- --
|
|
|
|
etsysIetfBridgeDot1dStpLoopProtectPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysIetfBridgeDot1dStpLoopProtectPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of port based information for the Loop Protect
|
|
feature."
|
|
::= { etsysIetfBridgeDot1dLoopProtect 1 }
|
|
|
|
etsysIetfBridgeDot1dStpLoopProtectPortEntry OBJECT-TYPE
|
|
SYNTAX EtsysIetfBridgeDot1dStpLoopProtectPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The per port information for the Loop Protect feature."
|
|
AUGMENTS { dot1dStpPortEntry }
|
|
::= { etsysIetfBridgeDot1dStpLoopProtectPortTable 1 }
|
|
|
|
EtsysIetfBridgeDot1dStpLoopProtectPortEntry ::=
|
|
SEQUENCE {
|
|
etsysIetfBridgeDot1dStpLoopProtectPortCistEnable EnabledStatus,
|
|
etsysIetfBridgeDot1dStpLoopProtectPortCistBlocking TruthValue,
|
|
etsysIetfBridgeDot1dStpLoopProtectPortPartnerCapable TruthValue
|
|
}
|
|
|
|
etsysIetfBridgeDot1dStpLoopProtectPortCistEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled/disabled status of the Loop Protect
|
|
feature for this port on the Common and Internal
|
|
Spanning Tree (CIST)."
|
|
DEFVAL { disabled }
|
|
::= { etsysIetfBridgeDot1dStpLoopProtectPortEntry 1 }
|
|
|
|
etsysIetfBridgeDot1dStpLoopProtectPortCistBlocking OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the port on the CIST with respect to
|
|
the Loop Protect feature.
|
|
|
|
true(1) - this port is being held in the blocking state
|
|
by the Loop Protect feature.
|
|
|
|
false(2) - this port is not being held in the blocking
|
|
state by the Loop Protect feature.
|
|
|
|
When this object has a value of true(1) setting its value
|
|
to false(2) will cause the Loop Protect feature to no longer
|
|
hold the port in the blocking state.
|
|
|
|
All other set operations on this object are undefined and
|
|
MUST NOT have any effect."
|
|
DEFVAL { false }
|
|
::= { etsysIetfBridgeDot1dStpLoopProtectPortEntry 2 }
|
|
|
|
etsysIetfBridgeDot1dStpLoopProtectPortPartnerCapable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The capability of the port's link partner with respect to
|
|
the Loop Protect feature.
|
|
|
|
true(1) - the partner supports the Loop Protect feature.
|
|
|
|
false(2) - the partner does not support the Loop Protect
|
|
feature.
|
|
|
|
When this object has a value of true(1) the full functionality
|
|
of the Loop Protect feature will be utilized on the port.
|
|
When this object has a value of false(2) limited Loop Protect
|
|
functionality will be utilized on the port."
|
|
DEFVAL { false }
|
|
::= { etsysIetfBridgeDot1dStpLoopProtectPortEntry 3 }
|
|
|
|
etsysIetfBridgeDot1dStpLoopProtectEventThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Loop Protect events that must occur on a
|
|
given port on a given Spanning Tree instance within the
|
|
interval defined by etsysIetfBridgeDot1dLoopProtectEventWindow
|
|
for the port to become locked (i.e., held indefinitely in
|
|
the blocking state). If this object is set to zero
|
|
no locking will be performed."
|
|
DEFVAL { 3 }
|
|
::= { etsysIetfBridgeDot1dLoopProtect 2 }
|
|
|
|
etsysIetfBridgeDot1dStpLoopProtectEventWindow OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This time value, measured in units of seconds, specifies
|
|
the length of the interval during which Loop Protect events
|
|
are counted for a given port on a given Spanning Tree
|
|
instance."
|
|
DEFVAL { 180 }
|
|
::= { etsysIetfBridgeDot1dLoopProtect 3 }
|
|
|
|
etsysIetfBridgeDot1dStpLoopProtectEventTrapEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled/disabled status of Loop Protect event
|
|
notification."
|
|
DEFVAL { disabled }
|
|
::= { etsysIetfBridgeDot1dLoopProtect 4 }
|
|
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- Extensions to the dot1dBasePortTable
|
|
-- ---------------------------------------------------------- --
|
|
|
|
etsysIetfBridgeDot1dBasePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysIetfBridgeDot1dBasePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of port based controls. Augments the
|
|
dot1dBasePortTable."
|
|
::= { etsysIetfBridgeDot1dBase 1 }
|
|
|
|
etsysIetfBridgeDot1dBasePortEntry OBJECT-TYPE
|
|
SYNTAX EtsysIetfBridgeDot1dBasePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The per port controls for an individual bridge port."
|
|
AUGMENTS { dot1dBasePortEntry }
|
|
::= { etsysIetfBridgeDot1dBasePortTable 1 }
|
|
|
|
EtsysIetfBridgeDot1dBasePortEntry ::=
|
|
SEQUENCE {
|
|
etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap EnabledStatus,
|
|
etsysIetfBridgeDot1dBasePortMovedAddrTrap EnabledStatus
|
|
}
|
|
|
|
etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the new learned address notification feature on
|
|
this port.
|
|
|
|
When etsysIetfBridgeDot1qNewLearnedAddrTrapEnable and this
|
|
object are both set to enabled the agent will generate
|
|
an etsysIetfBridgeDot1qFdbNewLearnedAddr notification for each
|
|
new entry in the dot1qTpFdbTable with a dot1qTpFdbStatus value
|
|
equal to learned(3) and a dot1qTpFdbPort value equal to this
|
|
row's dot1dBasePort value.
|
|
|
|
Setting this object to disabled will prevent the agent from
|
|
generating etsysIetfBridgeDot1qFdbNewLearnedAddr notifications
|
|
for this port.
|
|
|
|
If etsysIetfBridgeDot1qNewLearnedAddrTrapEnable is set to
|
|
disabled, setting this object to enabled will have no effect.
|
|
|
|
Notification generation is not required to match new address
|
|
rate of learning. A best effort delivery queue is acceptable."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.7."
|
|
DEFVAL { disabled }
|
|
::= { etsysIetfBridgeDot1dBasePortEntry 1 }
|
|
|
|
etsysIetfBridgeDot1dBasePortMovedAddrTrap OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the moved address notification feature on
|
|
this port.
|
|
|
|
When etsysIetfBridgeDot1qMovedAddrTrapEnable and this
|
|
object are both set to enabled the agent will generate
|
|
an etsysIetfBridgeDot1qFdbMovedAddr notification for
|
|
each entry in the dot1qTpFdbTable that has a dot1qTpFdbStatus
|
|
value equal to learned(3) and a dot1qTpFdbPort value equal to
|
|
this row's dot1dBasePort value when it is detected that the
|
|
corresponding dot1qTpFdbAddress has moved to this row's
|
|
dot1dBasePort from another port.
|
|
|
|
Setting this object to disabled will prevent the agent from
|
|
generating etsysIetfBridgeDot1qFdbMovedAddr notifications
|
|
for this port.
|
|
|
|
If etsysIetfBridgeDot1qMovedAddrTrapEnable is set to
|
|
disabled, setting this object to enabled will have no effect.
|
|
|
|
Notification generation is not required to match the
|
|
dot1qTpFdbTable entry modification rate. A best effort
|
|
delivery queue is acceptable."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.7."
|
|
DEFVAL { disabled }
|
|
::= { etsysIetfBridgeDot1dBasePortEntry 2 }
|
|
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- Extensions to the Generic Bridge Group
|
|
-- ---------------------------------------------------------- --
|
|
|
|
etsysIetfBridgeDot1qNewLearnedAddrTrapEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The global status of the new learned address notification
|
|
feature.
|
|
|
|
When this object is set to enabled(1), the agent will generate
|
|
etsysIetfBridgeDot1qFdbNewLearnedAddr notifications for each
|
|
new address learned on ports that have their corresponding
|
|
etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap object set to
|
|
enabled(1).
|
|
|
|
If etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap is set
|
|
to disabled(2) for all ports then setting this object to
|
|
enabled(1) will not have any effect.
|
|
|
|
When this object is set to disabled(1), the agent will not
|
|
generate any etsysIetfBridgeDot1qFdbNewLearnedAddr
|
|
notifications."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.7."
|
|
DEFVAL { disabled }
|
|
::= { etsysIetfBridgeDot1qBase 1 }
|
|
|
|
etsysIetfBridgeDot1qMovedAddrTrapEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The global status of the moved address notification
|
|
feature.
|
|
|
|
When this object is set to enabled(1), the agent will
|
|
generate etsysIetfBridgeDot1qFdbMovedAddr notifications
|
|
for each moved address on ports that have their corresponding
|
|
etsysIetfBridgeDot1dBasePortMovedAddrTrap object set to
|
|
enabled(1).
|
|
|
|
If etsysIetfBridgeDot1dBasePortMovedAddrTrap is set
|
|
to disabled(2) for all ports then setting this object to
|
|
enabled(1) will not have any effect.
|
|
|
|
When this object is set to disabled(1), the agent will not
|
|
generate any etsysIetfBridgeDot1qFdbMovedAddr
|
|
notifications."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.7."
|
|
DEFVAL { disabled }
|
|
::= { etsysIetfBridgeDot1qBase 2 }
|
|
|
|
etsysIetfBridgeDot1qStaticUcastAsMcast OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this object is set to enabled(1), the agent will
|
|
allow unicast traffic which matches all 48 bits of a static
|
|
and the source VLAN of a multicast entry in the filter-database,
|
|
except for the multicast-bit (bit 8). This augments the behavior
|
|
defined in the IEEE 802.1Q specification.
|
|
|
|
For example, if a static multicast address is configured as
|
|
01-02-03-04-05-06, VLAN 7, frames with a destination MAC address
|
|
of either 01-02-03-04-05-06 or 00-02-03-04-05-06, received on
|
|
VLAN 7, will match this entry."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 8.10.1"
|
|
DEFVAL { disabled }
|
|
::= { etsysIetfBridgeDot1qBase 3 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- Notifications
|
|
-- ---------------------------------------------------------- --
|
|
|
|
etsysIetfBridgeDot1qFdbNewLearnedAddr NOTIFICATION-TYPE
|
|
OBJECTS { dot1qTpFdbPort }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates that a new entry has been created
|
|
in the dot1qTpFdbTable with a dot1qTpFdbStatus value equal to
|
|
learned(3)."
|
|
::= { etsysIetfBridgeDot1Notifications 1 }
|
|
|
|
etsysIetfBridgeDot1dSpanGuardPortBlocked NOTIFICATION-TYPE
|
|
OBJECTS { dot1dBasePort, dot1dBasePortIfIndex }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates that a bridge port has been
|
|
placed in the blocking state by the SpanGuard feature."
|
|
::= { etsysIetfBridgeDot1Notifications 2 }
|
|
|
|
etsysIetfBridgeDot1dBackupRootActivation NOTIFICATION-TYPE
|
|
OBJECTS { dot1dBaseBridgeAddress, dot1dStpDesignatedRoot }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates that the BackupRoot feature
|
|
has activated on this bridge. When multiple spanning
|
|
trees exist the values of etsysMstpMstId,
|
|
etsysMstpBridgePriority, and etsysMstpDesignatedRoot
|
|
for the applicable spanning tree SHOULD be encoded as
|
|
well."
|
|
::= { etsysIetfBridgeDot1Notifications 3 }
|
|
|
|
etsysIetfBridgeDot1qFdbMovedAddr NOTIFICATION-TYPE
|
|
OBJECTS { dot1qTpFdbPort }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates that a new entry in the
|
|
dot1qTpFdbTable with a dot1qTpFdbStatus value equal to
|
|
learned(3) has replaced an entry which had the same
|
|
dot1qTpFdbAddress but different dot1qTpFdbPort, to
|
|
indicate a dot1qTpFdbAddress has moved from one port
|
|
to another."
|
|
::= { etsysIetfBridgeDot1Notifications 4 }
|
|
|
|
etsysIetfBridgeDot1dCistLoopProtectEvent NOTIFICATION-TYPE
|
|
OBJECTS { dot1dStpPort,
|
|
etsysIetfBridgeDot1dStpLoopProtectPortCistBlocking }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates that a Loop Protect event
|
|
has occurred on a bridge port on the CIST."
|
|
::= { etsysIetfBridgeDot1Notifications 5 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Conformance Information
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysIetfBridgeConformance
|
|
OBJECT IDENTIFIER ::= { etsysIetfBridgeMibExtMIB 2 }
|
|
|
|
etsysIetfBridgeGroups
|
|
OBJECT IDENTIFIER ::= { etsysIetfBridgeConformance 1 }
|
|
|
|
etsysIetfBridgeCompliances
|
|
OBJECT IDENTIFIER ::= { etsysIetfBridgeConformance 2 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Units of conformance
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysIetfBridgeStpPort OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIetfBridgeDot1dStpPortStpEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects relating to per Port Spanning
|
|
Tree information."
|
|
::= { etsysIetfBridgeGroups 1 }
|
|
|
|
etsysIetfBridgeStpTrap OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIetfBridgeDot1dStpTopChangeTrapEnable,
|
|
etsysIetfBridgeDot1dStpNewRootTrapEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects relating to Spanning Tree
|
|
SNMP Trap control."
|
|
::= { etsysIetfBridgeGroups 2 }
|
|
|
|
etsysIetfBridgeBase OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIetfBridgeDot1qNewLearnedAddrTrapEnable,
|
|
etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects relating to bridge
|
|
configuration information."
|
|
::= { etsysIetfBridgeGroups 3 }
|
|
|
|
etsysIetfBridgeDot1qFdbNewAddrNotification NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
etsysIetfBridgeDot1qFdbNewLearnedAddr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The New Learned Address Notification."
|
|
::= { etsysIetfBridgeGroups 4 }
|
|
|
|
etsysIetfBridgeDot1dStpBridgePriority OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIetfBridgeDot1dStpBridgePriorityDefault
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An object for support of legacy bridge priorities."
|
|
::= { etsysIetfBridgeGroups 5 }
|
|
|
|
etsysIetfBridgeSpanGuard OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIetfBridgeDot1dStpSpanGuardEnable,
|
|
etsysIetfBridgeDot1dStpSpanGuardBlockTime,
|
|
etsysIetfBridgeDot1dStpSpanGuardTrapEnable,
|
|
etsysIetfBridgeDot1dStpPortSpanGuardBlocking
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects relating to the SpanGuard
|
|
feature."
|
|
::= { etsysIetfBridgeGroups 6 }
|
|
|
|
etsysIetfBridgeSpanGuardNotification NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
etsysIetfBridgeDot1dSpanGuardPortBlocked
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SpanGuard Port Blocked Notification."
|
|
::= { etsysIetfBridgeGroups 7 }
|
|
|
|
etsysIetfBridgeBackupRoot OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIetfBridgeDot1dStpBackupRootEnable,
|
|
etsysIetfBridgeDot1dStpBackupRootTrapEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects relating to the BackupRoot
|
|
feature."
|
|
::= { etsysIetfBridgeGroups 8 }
|
|
|
|
etsysIetfBridgeBackupRootNotification NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
etsysIetfBridgeDot1dBackupRootActivation
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Backup Root Activation Notification."
|
|
::= { etsysIetfBridgeGroups 9 }
|
|
|
|
etsysIetfBridgePortCistRoleValue OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIetfBridgeDot1dStpPortCistRoleValue
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The role of the port with respect to the CIST."
|
|
::= { etsysIetfBridgeGroups 10 }
|
|
|
|
etsysIetfBridgeMovedAddr OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIetfBridgeDot1qMovedAddrTrapEnable,
|
|
etsysIetfBridgeDot1dBasePortMovedAddrTrap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects relating to enabling moved address
|
|
notifications."
|
|
::= { etsysIetfBridgeGroups 11 }
|
|
|
|
etsysIetfBridgeDot1qFdbMovedAddrNotification NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
etsysIetfBridgeDot1qFdbMovedAddr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Moved Address Notification."
|
|
::= { etsysIetfBridgeGroups 12 }
|
|
|
|
etsysIetfBridgeLoopProtect OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIetfBridgeDot1dStpLoopProtectPortCistEnable,
|
|
etsysIetfBridgeDot1dStpLoopProtectPortCistBlocking,
|
|
etsysIetfBridgeDot1dStpLoopProtectPortPartnerCapable,
|
|
etsysIetfBridgeDot1dStpLoopProtectEventThreshold,
|
|
etsysIetfBridgeDot1dStpLoopProtectEventWindow,
|
|
etsysIetfBridgeDot1dStpLoopProtectEventTrapEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects relating to the Loop Protect
|
|
feature."
|
|
::= { etsysIetfBridgeGroups 13 }
|
|
|
|
etsysIetfBridgeLoopProtectNotification NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
etsysIetfBridgeDot1dCistLoopProtectEvent
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Loop Protect Event Notification for the CIST."
|
|
::= { etsysIetfBridgeGroups 14 }
|
|
|
|
etsysIetfBridgeStpCistNonForwardingReason OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIetfBridgeDot1dStpPortCistNonForwardingReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An object that indicates the reason for an exceptional
|
|
non-forwarding condition per port on the CIST."
|
|
::= { etsysIetfBridgeGroups 15 }
|
|
|
|
etsysIetfBridgeStaticUcastAsMcast OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysIetfBridgeDot1qStaticUcastAsMcast
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects pertaining to the transmission of
|
|
unicast packets received by the device."
|
|
::= { etsysIetfBridgeGroups 16 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Compliance statements
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysIetfBridgeCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for devices that support the
|
|
IETF BRIDGE-MIB Extension MIB."
|
|
|
|
MODULE
|
|
|
|
GROUP etsysIetfBridgeStpPort
|
|
DESCRIPTION
|
|
"Support for this group is optional and only applies
|
|
to products that wish to allow the disabling of the
|
|
Spanning Tree protocol on a per port basis."
|
|
|
|
GROUP etsysIetfBridgeStpTrap
|
|
DESCRIPTION
|
|
"Support for this group is optional and only applies
|
|
to products that wish to allow disabling the
|
|
generation of SNMP Traps from Spanning Tree."
|
|
|
|
GROUP etsysIetfBridgeBase
|
|
DESCRIPTION
|
|
"Support for this group is optional and only applies
|
|
to products that wish to allow the enabling of new
|
|
learned address notifications."
|
|
|
|
GROUP etsysIetfBridgeDot1qFdbNewAddrNotification
|
|
DESCRIPTION
|
|
"Support for this group is mandatory for entities
|
|
that support the New Address notification feature."
|
|
|
|
GROUP etsysIetfBridgeSpanGuard
|
|
DESCRIPTION
|
|
"Support for this group is mandatory for entities
|
|
that support the SpanGuard feature."
|
|
|
|
GROUP etsysIetfBridgeSpanGuardNotification
|
|
DESCRIPTION
|
|
"Support for this group is mandatory for entities
|
|
that support the SpanGuard feature."
|
|
|
|
GROUP etsysIetfBridgeBackupRoot
|
|
DESCRIPTION
|
|
"Support for this group is mandatory for entities
|
|
that support the Backup Root feature."
|
|
|
|
GROUP etsysIetfBridgeBackupRootNotification
|
|
DESCRIPTION
|
|
"Support for this group is mandatory for entities
|
|
that support the Backup Root feature."
|
|
|
|
GROUP etsysIetfBridgeDot1dStpBridgePriority
|
|
DESCRIPTION
|
|
"Support for this group is mandatory for entities
|
|
that support legacy bridge priorities."
|
|
|
|
GROUP etsysIetfBridgePortCistRoleValue
|
|
DESCRIPTION
|
|
"Support for this group is mandatory for entities
|
|
that support rapid or multiple spanning tree."
|
|
|
|
GROUP etsysIetfBridgeMovedAddr
|
|
DESCRIPTION
|
|
"Support for this group is optional and only applies
|
|
to products that wish to allow the enabling of moved
|
|
address notifications."
|
|
|
|
GROUP etsysIetfBridgeDot1qFdbMovedAddrNotification
|
|
DESCRIPTION
|
|
"Support for this group is mandatory for entities
|
|
that support the Moved Address notification feature."
|
|
|
|
GROUP etsysIetfBridgeLoopProtect
|
|
DESCRIPTION
|
|
"Support for this group is mandatory for entities
|
|
that support the Loop Protect feature."
|
|
|
|
GROUP etsysIetfBridgeLoopProtectNotification
|
|
DESCRIPTION
|
|
"Support for this group is mandatory for entities
|
|
that support the Loop Protect feature."
|
|
|
|
GROUP etsysIetfBridgeStpCistNonForwardingReason
|
|
DESCRIPTION
|
|
"Support for this group is optional and only applies
|
|
to products that wish to provide the reasons for
|
|
exceptional non-forwarding conditions."
|
|
|
|
::= { etsysIetfBridgeCompliances 1 }
|
|
|
|
etsysIetfBridgeStaticUcastAsMcastCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for devices that support
|
|
the ability to transmit unicast frames as multicast frames."
|
|
|
|
MODULE
|
|
GROUP etsysIetfBridgeStaticUcastAsMcast
|
|
DESCRIPTION
|
|
"This group is mandatory for all devices that support the
|
|
ability to transmit unicast frames as if the multicast bit
|
|
was set in the destination MAC address."
|
|
::= { etsysIetfBridgeCompliances 2 }
|
|
|
|
|
|
END
|