clones/librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-09-21 18:38:25 +00:00
Code Issues Packages Projects Releases Wiki Activity
6073ba6112
librenms/mibs/SAMSUNG-PRINTER-EXT-TC
Tom Laermans b55bc50834 MOAR MIB 
git-svn-id: http://www.observium.org/svn/observer/trunk@1987 61d68cd4-352d-0410-923a-c4978735b2b8
2011-03-29 12:58:21 +00:00

1469 lines
64 KiB
Plaintext
Raw Blame History

SAMSUNG-PRINTER-EXT-TC DEFINITIONS ::= BEGIN
-- Module: Printer MIB TC
-- File: SamsungPrinttc.mib
-- Editors: wono.song@samsung.com
-- Date: July 17, 2004
-- Version: 1.00
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI -- RFC 1442/1902/2578
TEXTUAL-CONVENTION
FROM SNMPv2-TC -- RFC 1443/1903/2579
samsungCommonMIB
FROM SAMSUNG-COMMON-MIB;
scmPrintTC MODULE-IDENTITY
LAST-UPDATED "0407170000Z" -- 17 Jul 2004
ORGANIZATION "Samsung Common Management Interface Working Group"
CONTACT-INFO "
SCMI Editors
E-Mail: wono.song@samsung.com
--
--
"
DESCRIPTION "
Version: 1.00
SCMI Extensions to Printer MIB Textual Conventions.
This Module provides Samsung extensions of the IETF Printer MIB.
Copyright (C) 2003-2004 Samsung Corporation. All Rights Reserved."
::= { samsungCommonMIB 54 }
--
-- SCMI Extensions to Printer MIB Textual Convention Definitions:
--
-- ScmPrtAuxSheetContent
-- ScmPrtAuxSheetType
-- ScmPrtChannelType
-- ScmPrtGroupSupport
-- ScmPrtIETFPrintMIBGroupSupport
-- ScmPrtInterpreterLangFamily
-- ScmPrtMediaTypeErrorPolicy
-- ScmPrtMediumClassType
-- ScmPrtMediumSize
-- ScmPrtOutputOffsetStackingType
-- ScmPrtOutputStaplePosition
-- ScmPrtPageSizeErrorPolicy
-- ScmPrtPCLFontSource
-- ScmPrtPlex
-- ScmPrtPrintQuality
-- ScmPrtPrintScreen
-- ScmPrtTraySwitch
-- ScmPrtGeneralMonoPrintOpt
--
ScmPrtAuxSheetContent ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
Auxiliary sheets are added by the printing system and
are not part of the actual print job. Examples include
error pages and banner pages.
This textual convention is used to specify the information
content of auxiliary sheets."
SYNTAX INTEGER {
other(1),
unknown(2),
notSpecified(3),
concise(5), -- content of page is concise
verbose(6) -- content of page is verbose
}
ScmPrtAuxSheetType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
Auxiliary sheets are added by the printing system and
are not part of the actual print job.
This attribute uniquely identifies an auxiliary-sheet,
which includes the types jobErrorSheet and printerStartupSheet.
'printerStartupSheet' is a sheet printed shortly after power-up
when the device is ready. Typical startup pages include test
patterns and/or printer configuration information.
'jobErrorSheet' is a sheet printed with error messages
generated during the printing of a job-result-set that is to be
printed with the hardcopy output of that job-result-set, and
should be printed on an ending sheet of the job-result-set, or
some similar sheet. These sheets are not
a part of any job-copy. If no error messages have been
generated, the device need not print an extra page.
The default for this page type should be 'On'.
The following Auxiliary-sheet-package types can be specified
either for a job component (job result set or job copy) or
document (document result set or document copy).
For now, only the jobSetStart package has been enumerated.
'jobSetStart' - Auxiliary-sheet starts each result-set
Sometimes referred to as a jobBanner sheet
'jobSetEnd' - Auxiliary-sheet at the end of a result set "
REFERENCE "
ISO/IEC 10175-1:1996(E)
Section 9.10.2.2: Delivery-methods for hardcopy output logs
Section 9.11.1: Auxiliary-sheet-package identifier"
SYNTAX INTEGER {
other(-1),
unknown(-2),
notSpecified(-3),
jobSetStart(1),
jobSetEnd(2),
printerStartupSheet(101),
jobErrorSheet(102)
}
ScmPrtChannelType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
This enumeration indicates the type of channel that is
receiving jobs.
This enumeration is being added to the IETF Printer MIB.
This is an IETF type 2 enum."
SYNTAX INTEGER {
other(1),
chSerialPort(3),
chParallelPort(4),
chIEEE1284Port(5),
chSCSIPort(6),
chAppleTalkPAP(7),
-- AppleTalk Printer
-- Access Protocol (PAP)
--
-- prtChannelInformation entry:
--
-- Printer Name
-- Keyword: Name
-- Status: Optional
-- Multiplicity: Single
-- Description: The name of the
-- printer within the AppleTalk
-- naming scope
chLPDServer(8),
-- prtChannelInformation entry:
--
-- Printer queue name
-- Keyword: Queue
-- Syntax: Name
-- Status: Mandatory
-- Multiplicity: Single
-- Description: queue name as
-- defined in RFC 1179.
chNetwareRPrinter(9),
-- Novell, Inc.
-- For each entry of this type, the
-- prtChannelInformation must have a pair
-- of keywords. For Netware 3.x channels
-- this must be a (PServer, Printer) pair.
-- For Netware 4.x channels and for
-- IntranetWare channels this must be a
-- (NDSTree, NDSPrinter) pair.
--
-- prtChannelInformation entries:
-- Print Server Name
-- Keyword: PServer
-- Syntax: Name
-- Status: Mandatory
-- Multiplicity: Single
-- Description: The Pserver's SAP name
--
-- Printer Number
-- Keyword: Printer
-- Syntax: Integer
-- Status: Mandatory
-- Multiplicity: Single
-- Description: The printer number
--
-- NDSTree
-- Keyword: NDSTree
-- Syntax: Name
-- Multiplicity: Single
-- Description: The tree's SAP name
--
-- NDS Printer object
-- Keyword: NDSPrinter
-- Syntax: Text (Unicode)
-- Status: Mandatory
-- Multiplicity: Single
-- Description: The fully qualified
-- name of the Printer
--
-- In the Netware 3.x environment, the
-- client checks the Bindery object
-- representing the named PServer. The
-- client then checks for queues which
-- are associated with the numbered
-- printer. In the 4.x and IntraNetware
-- environment, the client looks up the
-- queues which are associated with the
-- NDS Printer Object in the named Tree.
-- Depending on client access rights to
-- those queues, the client submits jobs
-- to the appropriate queue.
chNetwarePServer(10),
-- Novell,Inc.
-- For each entry of this type, the
-- prtChannelInformation must have a pair
-- of keywords. For Netware 3.x channels
-- this must be a (Server, PServer) pair.
-- For Netware 4.x and IntranetWare
-- channels, this must be a
-- (NDSTree, NDSPServer) pair.
--
-- prtChannelInformation entries:
--
-- Server Name
-- Keyword: Server
-- Syntax: Name
-- Status: Mandatory
-- Multiplicity: Single
-- Description: The SAP name of the
-- server for which the PServer is
-- defined.
--
-- PServer
-- Keyword: PServer
-- Syntax: Name
-- Status: Mandatory
-- Multiplicity: Single
-- Description: The bindery name of
-- the PServer
--
-- NDS Tree
-- Keyword: NDSTree
-- Syntax: Name
-- Status: Mandatory
-- Multiplicity: Single
-- Description: The NDS Tree name
--
-- PServer
-- Keyword: NDSPServer
-- Syntax: Text (Unicode)
-- Status: Mandatory
-- Multiplicity: Single
-- Description: The fully qualified
-- name of the PServer object in the
-- tree.
--
-- In the 3.x environment, the client
-- checks the bindery object
-- representing the named PServer on the
-- named Server. In the 4.x and
-- IntranetWare environment,
-- the client checks the NDS object
-- representing the named PServer in the
-- named Tree. In either case, the
-- client then checks for all queues
-- associated with the Pserver object.
-- Depending on client access rights
-- to those queues, the client submits
-- jobs to the appropriate queue.
chPort9100(11),
-- DEPRECATED
chAppSocket(12),
-- A bi-directional, LPD-like,
-- protocol using 9101 for
-- control and 9100 for data.
-- Adobe Systems, Inc.
chFTP(13), -- RFC 959
chTFTP(14), -- RFC 1350
chDLCLLCPort(15),
chIBM3270(16), -- IBM Coax
chIBM5250(17), -- IBM Twinax
chFax(18),
chIEEE1394(19),
chTransport1(20),
-- TCP port 35, see reserved TCP port list
-- in RFC 1700 or current "Assigned
-- Numbers" RFC. This RFC should also be
-- referenced for other channel
-- enumerations utilizing TCP port
-- numbers 0 through 1024.
chCPAP(21), -- TCP port 170, Digital
-- Equipment Corp.
chPCPrint(26), -- Banyan
chServerMessageBlock(27),
-- File/Print sharing protocol used by
-- various network operating systems
-- from IBM 3Com, Microsoft and others
--
-- prtChannelInformation entry:
--
-- Service Name
-- Keyword: Name
-- Syntax: Name
-- Status: Optional
-- Multiplicity: Single
-- Description: The service name of
-- the printer
chPSM(28), -- Printing Systems
-- Manager, IBM
chSystemObjectManager(31), -- IBM
chDECLAT(32),
-- Digital Equipment Corp.
--
-- prtChannelInformation entries:
--
-- Port Name
-- Keyword: Port
-- Syntax: Name
-- Status: Conditionally
-- Mandatory
-- (see note below)
-- Multiplicity: Single
-- Description: LAT port name
--
-- Service Name
-- Keyword: Service
-- Syntax: Name
-- Status: Conditionally
-- Mandatory
-- Multiplicity: Single
-- Description: LAT service
-- name
--
-- The LAT channel may be
-- identified by either a port or
-- service, so either a
-- Port or Service entry must be
-- specified, but not both.
chNPAP(33),
chUSB(34), -- Universal Serial Bus
chIRDA(35), -- Infrared Data Assoc. Prot.
chPrintXChange(36), -- PrintXChange Protocol
chPortTCP(37),
-- A unidirectional "raw" TCP
-- channel that uses an administratively
-- assigned TCP port address.
--
-- prtChannelInformation entry:
--
-- Port Number
-- Keyword: Port
-- Syntax: decimal number
-- Status: Mandatory
-- Multiplicity: Single
-- Description: TCP port number
chBidirPortTCP(38),
-- A bidirectional version of chPortTCP
--
-- prtChannelInformation entries:
-- (See chPortTCP)
chUNPP(39),
-- Universal Network Printing
-- Protocol(UNPP). A bi-directional,
-- multiport network printing
-- application protocol available on
-- multiple transport protocols.
-- Underscore, Inc.
-- Contact: info@underscore.com
chAppleTalkADSP(40),
-- AppleTalk Data Stream Protocol.
-- ADSP is part of the AppleTalk
-- suite of protocols.
-- It is a symmetric, connection-
-- oriented protocol that makes
-- possible the establishment
-- and maintenance of full-duplex
-- streams of data bytes between
-- two sockets in an AppleTalk
-- internet.
-- See Inside AppleTalk, second
-- Edition, by Sidhu, Andrews and
-- Oppenheimer.
chPortSPX(41),
-- Sequenced Packet Exchange (SPX)
-- socket.
-- Novell, Inc. Similar to TCP, a
-- bi-directional data pipe using
-- Novell SPX as a transport.
--
-- prtChannelInformation entries:
--
-- Network Number
-- Keyword: Net
-- Syntax: HexString
-- Status: Mandatory
-- Multiplicity: Single
-- Description: The network number
--
-- Node Number
-- Keyword: Node
-- Syntax: HexString
-- Status: Mandatory
-- Multiplicity: Single
-- Description: The node number
--
-- Socket Number
-- Keyword: Socket
-- Syntax: HexString
-- Status: Mandatory
-- Multiplicity: Single
-- Description: The SPX socket number
--
-- There must be exactly one "Net" and
-- one "Node" and one "Socket" entry. A
-- HexString is a binary value
-- represented as a string of
-- ASCII characters using hexadecimal
-- notation.
chPortHTTP(42),
-- Hypertext Transfer Protocol. See IETF
-- documents relating to HTTP 1.0/1.1
-- (RFCs 1945 and 2068,etc.)
chNDPS(43)
-- Novell, Inc.
--
-- prtChannelInformation entry:
--
-- Printer Agent Name
-- Keyword: PA
-- Syntax: Name
-- Status: Mandatory
-- Multiplicity: Single
-- Description: The NDPS Printer
-- Agent Name
}
ScmPrtGroupSupport ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional Printer MIB Extension object groups,
specified in a bit-mask.
The current set of values (which may be extended in the future)
is given below:
1 : scmPrtBaseGroup -- 2**0
2 : scmPrtGeneralGroup -- 2**1
4 : scmPrtInputGroup -- 2**2
8 : scmPrtOutputGroup -- 2**3
16 : scmPrtChannelGroup -- 2**4
32 : scmPrtInterpreterGroup -- 2**5
64 : scmPrtInputAliasGroup -- 2**6
128 : scmPrtGeneralAuxSheetGroup -- 2**7
256 : scmPrtGeneralProdSpecificGroup -- 2**8
512 : scmPrtAuxPackageGroup -- 2**9
1024 : scmPrtChannelProdSpecificGroup -- 2**10
2048 : scmPrtInterpProdSpecificGroup -- 2**11
4096 : scmPrtInterpPCLGroup -- 2**12
8192 : scmPrtInterpPCLProdSpecificGroup -- 2**13
16384 : scmPrtMediumTypeSupportedGroup -- 2**14
Usage: Conforming management agents shall ALWAYS accurately
report their support for SCMI Printer MIB Extensions
object groups."
SYNTAX INTEGER (0..2147483647) -- biggest int = 2**31-1
ScmPrtIETFPrintMIBGroupSupport ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional IETF Printer MIB object groups,
specified in a bit-mask.
The current set of values (which may be extended in the future)
is given below:
1 : prtGeneralGroup -- 2**0 (mandatory)
2 : prtResponsiblePartyGroup -- 2**1
4 : prtInputGroup -- 2**2 (mandatory)
8 : prtExtendedInputGroup -- 2**3
16 : prtInputMediaGroup -- 2**4
32 : prtOutputGroup -- 2**5 (mandatory)
64 : prtExtendedOutputGroup -- 2**6
128 : prtOutputDimensionsGroup -- 2**7
256 : prtOutputFeaturesGroup -- 2**8
512 : prtMarkerGroup -- 2**9 (mandatory)
1024 : prtMarkerSuppliesGroup -- 2**10
2048 : prtMarkerColorantGroup -- 2**11
4096 : prtMediaPathGroup -- 2**12 (mandatory)
8192 : prtChannelGroup -- 2**13 (mandatory)
16384 : prtInterpreterGroup -- 2**14 (mandatory)
32768 : prtConsoleGroup -- 2**15 (mandatory)
65536 : prtAlertTableGroup -- 2**16 (mandatory)
131072 : prtAuxiliarySheetGroup -- 2**17
262144 : prtInputSwitchingGroup -- 2**18
Usage: Conforming management agents shall ALWAYS accurately
report their support for IETF Printer MIB object groups."
REFERENCE "See: IETF Printer MIB"
SYNTAX INTEGER (0..2147483647) -- biggest int = 2**31-1
ScmPrtInterpreterLangFamily ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
This enumeration indicates the type of interpreter that is
receiving jobs.
This enumeration is being added to the IETF Printer MIB.
This value is an IETF type 2 enumeration."
SYNTAX INTEGER {
other(1),
unknown(2),
langPCL(3), -- PCL. Starting with PCL version 5,
-- HP-GL/2 is included as part of the
-- PCL language.
-- PCL and HP-GL/2 are registered
-- trademarks of Hewlett-Packard
-- Company.
langHPGL(4), -- Hewlett-Packard Graphics Language.
-- HP-GL is a registered trademark of
-- Hewlett-Packard Company.
langPJL(5), -- Peripheral Job Language. Appears in
-- the data stream between data intended
-- for a page description language.
-- Hewlett-Packard Co.
langPS(6), -- PostScript (tm) Language
-- Postscript - a trademark of Adobe
-- Systems Incorporated which may be
-- registered in certain jurisdictions
langIPDS(7), -- Intelligent Printer Data Stream
-- Bi-directional print data stream for
-- documents consisting of data objects
-- (text, image, graphics, bar codes),
-- resources (fonts, overlays) and page,
-- form and finishing instructions.
-- Facilitates system level device
-- control, document tracking and error
-- recovery throughout the print
-- process.
-- Pennant Systems, IBM
langPPDS(8), -- IBM Personal Printer Data Stream.
-- Originally called IBM ASCII, the name
-- was changed to PPDS when the Laser
-- Printer was introduced in 1989.
-- Lexmark International, Inc.
langEscapeP(9), -- Epson Corp.
langEpson(10),
langDDIF(11), -- Digital Document Interchange Format
-- Digital Equipment Corp., Maynard MA
langInterpress(12),
-- Samsung Corp.
langISO6429(13), -- ISO 6429. Control functions for
-- Coded Character Sets (has ASCII
-- control characters, plus additional
-- controls for
-- character imaging devices.)
-- ISO Standard, Geneva, Switzerland
langLineData(14),-- line-data: Lines of data as
-- separate ASCII or EBCDIC records
-- and containing no control functions
-- (no CR, LF, HT, FF, etc.)
-- For use with traditional line
-- printers. May use CR and/or LF to
-- delimit lines, instead of records.
-- See ISO 10175 Document Printing
-- Application(DPA)
-- ISO standard, Geneva, Switzerland
langMODCA(15), -- Mixed Object Document Content
-- Architecture
-- Definitions that allow the
-- composition, interchange, and
-- presentation of final form
-- documents as a collection of data
-- objects (text, image, graphics, bar
-- codes), resources (fonts, overlays)
-- and page, form and finishing
-- instructions.
-- Pennant Systems, IBM
langREGIS(16), -- Remote Graphics Instruction Set,
-- Digital Equipment Corp., Maynard MA
langSCS(17), -- SNA Character String
-- Bi-directional print data stream for
-- SNA LU-1 mode of communication.
-- IBM
langSPDL(18), -- ISO 10180 Standard Page Description
-- Language
-- ISO Standard
langTEK4014(19), -- Tektronix Corp.
langPDS(20),
langIGP(21), -- Printronix Corp.
langCodeV(22), -- Magnum Code-V, Image and printer
-- control language used to control
-- impact/dot-matrix printers.
-- QMS, Inc., Mobile AL
langDSCDSE(23), -- DSC-DSE: Data Stream Compatible and
-- Emulation Bi-directional print data
-- stream for non-SNA (DSC) and SNA LU-3
-- 3270 controller (DSE) communications
-- IBM
langWPS(24), -- Windows Printing System, Resource
-- based command/data stream used by
-- Microsoft At Work Peripherals.
-- Developed by the Microsoft
-- Corporation.
langLN03(25), -- Early DEC-PPL3, Digital Equipment
-- Corp.
langCCITT(26),
langQUIC(27), -- QUIC (Quality Information Code), Page
-- Description Language for laser
-- printers. Included graphics, printer
-- control capability and emulation of
-- other well-known printer .
-- QMS, Inc.
langCPAP(28), -- Common Printer Access Protocol
-- Digital Equipment Corp.
langDecPPL(29), -- Digital ANSI-Compliant Printing
-- Protocol
-- (DEC-PPL)
-- Digital Equipment Corp.
langSimpleText(30),
-- simple-text: character coded data,
-- including NUL, CR , LF, HT, and FF
-- control characters. See ISO 10175
-- Document Printing Application (DPA)
-- ISO standard, Geneva, Switzerland
langNPAP(31), -- Network Printer Alliance Protocol
-- (NPAP). This protocol has been
-- superseded by the IEEE 1284.1 TIPSI
-- Std (ref. LangTIPSI(49)).
langDOC(32), -- Document Option Commands, Appears in
-- the data stream between data
-- intended for a page description .
-- QMS, Inc.
langimPress(33), -- imPRESS, Page description language
-- originally developed for the
-- ImageServer product line. A binary
-- language providing representations
-- of text, simple graphics, and some
-- large forms (simple
-- bit-map and CCITT group /
-- encoded).The
-- language was intended to be sent over
-- an 8-bit channel and supported early
-- document preparation languages (e.g.
-- TeX and TROFF).
-- QMS, Inc.
langPinwriter(34),
-- 24 wire dot matrix printer for
-- USA, Europe, and Asia except
-- Japan.
-- More widely used in Germany, and
-- some Asian countries than in US.
-- NEC
langNPDL(35), -- Page printer for Japanese market.
-- NEC
langNEC201PL(36),-- Serial printer language used in
-- the Japanese market.
-- NEC
langAutomatic(37),
-- Automatic PDL sensing. Automatic
-- sensing of the interpreter
-- language family by the printer
-- examining the document content.
-- Which actual interpreter language
-- families are sensed depends on
-- the printer implementation.
langPages(38), -- Page printer Advanced Graphic
-- Escape Set
-- IBM Japan
langLIPS(39), -- LBP Image Processing System
langTIFF(40), -- Tagged Image File Format (Aldus)
langDiagnostic(41),
-- A hex dump of the input to the
-- interpreter
langPSPrinter(42),
-- The PostScript Language used for
-- control (with any PDLs)
-- Adobe Systems Incorporated
langCaPSL(43), -- Canon Print Systems Language
langEXCL(44), -- Extended Command Language
-- Talaris Systems Inc.
langLCDS(45), -- Line Conditioned Data Stream
-- Samsung Corporation
langXES(46), -- Samsung Escape Sequences
-- Samsung Corporation
langPCLXL(47), -- Printer Control Language. Extended
-- language features for printing, and
-- printer control.
-- Hewlett-Packard Co.
langART(48), -- Advanced Rendering Tools (ART).
-- Page Description language
-- originally developed for the Laser
-- Press printers.
-- Technical reference manual: "ART IV
-- Reference Manual", No F33M.
-- Fuji Samsung Co., Ltd.
langTIPSI(49), -- Transport Independent Printer
-- System Interface (ref. IEEE Std.
-- 1284.1)
langPrescribe(50),
-- Page description and printer
-- control language. It can be
-- described with ordinary ASCII
-- Technical reference manual:
-- "PRESCRIBE II Programming Manual"
langLinePrinter(51),
-- A simple-text character stream which
-- supports the control codes LF, VT,
-- FF, and plus Centronics or
-- Dataproducts Vertical Format Unit
-- (VFU) language is commonly used on
-- many older model line and matrix
-- printers.
langIDP(52), -- Imaging Device Protocol
-- Apple Computer.
langXJCL(53), -- Samsung Job Control Language (JCL).
-- A Job Control language originally
-- developed for the LaserPress printers
-- and is capable of switching PDLs.
-- Technical reference manual:
-- "ART IV Reference Manual", No F33M.
-- Fuji Samsung Co., Ltd.
langPDF(54), -- Adobe Portable Document Format
-- Adobe Systems, Inc.
langRPDL(55), -- Ricoh Page Description Language for
-- printers.
-- Technical manual "RPDL command
-- reference" No.307029
-- RICOH, Co. LTD
langIntermecIPL(56),
-- Intermec Printer Language for label
-- printers.
-- Technical Manual: "IPL Programmers
-- Reference Manual"
-- Intermec Corporation
langUBIFingerprint(57),
-- An intelligent basic-like programming
-- language for label printers.
-- Reference Manual: "UBI Fingerprint
-- 7.1", No. 1-960434-00
-- United Barcode Industries
langUBIDirectProtocol(58)
-- An intelligent control language for
-- label printers.
-- Programmers guide: " UBI Direct
-- Protocol", No. 1-960419-00
-- United Barcode Industries
}
ScmPrtMediaTypeErrorPolicy ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
Controls interpreter behavior when the requested Media Type
is not currently available.
* The values 'other' and 'unknown' are deprecated for
conforming implementations.
* 'abortJob' will cause the interpreter to abort the job
with an appropriate error condition.
* 'ignore' will cause the job to be printed on the default
media as specified by scmPrtInterpInputIndexDefault OR
scmPrtInterpPaperSizeDefault OR any available media
deemed appropriate by the implementation.
No adjustment will be made to the image size.
Exact semantics of this setting are product specific.
* 'interactWithOperator' will cause the printer to interact
with the operator to determine what to do. For example,
display a message at the operator console requesting the
desired media. The semantics of this policy vary among
different products and environments.
* 'ignoreAfterTimeout' will cause the job to be ignored
same as 'ignore' above, but not till after
scmPrtInterpErrorPolicyTimeout expires."
REFERENCE "
See: ScmPrtPageSizeErrorPolicy"
SYNTAX INTEGER {
other(1),
unknown(2),
notSpecified(3),
abortJob(4),
ignore(5),
interactWithOperator(6),
ignoreAfterTimeout(11)
}
ScmPrtMediumClassType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
Paper size classes for a printer."
SYNTAX INTEGER {
other (1),
unknown(2),
notSpecified(3),
northAmerica(4),
iso(5),
jis(6)
}
ScmPrtMediumSize ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
This attribute specifies the size of this medium by means of a
pre-defined value. The medium size specified in this manner may
be one of the standard sizes to which object identifiers have
been assigned in ISO/IEC 10175 (DPA), or another applicable
standard, or for which a value has been created.
Enumerations for DPA defined medium sizes are derived by adding
1000 to the ISO/IEC 10175 enumerations.
SCMI defined enumerations start at 10."
REFERENCE "ISO/IEC 10175-1:1996(E), Section 9.6.5: Medium-size"
SYNTAX INTEGER {
other(1),
unknown(2),
notSpecified(3),
-- SCMI defined medium sizes
mediumSize13x18(10), -- 13 by 18 inches
-- DPA defined medium sizes
naLetter(1000), -- 8.5 by 11 inches
naLegal(1001), -- 8.5 by 14 inches
na10x13Envelope(1002), -- 10 by 13 inches
na9x12Envelope(1003), -- 9 by 12 inches
naNumber10Envelope(1004), -- 4.125 by 9.5 inches
na7x9Envelope(1005), -- 7 by 9 inches
na9x11Envelope(1006), -- 9 by 11 inches
na10x14Envelope(1007), -- 10 by 14 inches
naNumber9Envelope(1008), --
na6x9Envelope(1009), -- 6 by 9 inches
na10x15Envelope(1010), -- 10 by 15 inches
a(1011), -- 8.5 by 11 inches
b(1012), -- 11 by 17 inches
c(1013), -- 17 by 22 inches
d(1014), -- 22 by 34 inches
e(1015), -- 34 by 44 inches
monarchEnvelope(1016), -- 3.87 by 7.5 inches
isoA0(1020), -- 841 by 1189 mm
isoA1(1021), -- 594 by 841 mm
isoA2(1022), -- 420 by 594 mm
isoA3(1023), -- 297 by 420 mm
isoA4(1024), -- 210 by 297 mm
isoA5(1025), -- 148 by 210 mm
isoA6(1026), -- 105 by 148 mm
isoA7(1027), -- 74 by 105 mm
isoA8(1028), -- 52 by 74 mm
isoA9(1029), -- 37 by 52 mm
isoA10(1030), -- 26 by 37 mm
isoB0(1040), -- 1000 by 1414 mm
isoB1(1041), -- 707 by 1000 mm
isoB2(1042), -- 500 by 707 mm
isoB3(1043), -- 353 by 500 mm
isoB4(1044), -- 250 by 353 mm
isoB5(1045), -- 176 by 250 mm
isoB6(1046), -- 125 by 176 mm
isoB7(1047), -- 88 by 125 mm
isoB8(1048), -- 62 by 88 mm
isoB9(1049), -- 44 by 62 mm
isoB10(1050), -- 31 by 44 mm
isoC3(1063), -- 324 by 458 mm
isoC4(1064), -- 229 by 324 mm
isoC5(1065), -- 162 by 229 mm
isoC6(1066), -- 114 by 162 mm
isoDesignatedLong(1067), -- 110 by 220 mm
jisB0(1080), -- 1030 by 1456 mm
jisB1(1081), -- 728 by 1030 mm
jisB2(1082), -- 515 by 728 mm
jisB3(1083), -- 364 by 515 mm
jisB4(1084), -- 257 by 364 mm
jisB5(1085), -- 182 by 257 mm
jisB6(1086), -- 128 by 182 mm
jisB7(1087), -- 91 by 128 mm
jisB8(1088), -- 64 by 91 mm
jisB9(1089), -- 45 by 64 mm
jisB10(1090), -- 32 by 45 mm
executive(1100), -- 7.25 by 10.5 inches
folio(1101), -- 8.5 by 13 inches
invoice(1102), -- 5.5 by 8.5 inches
ledger(1103), -- aka statement, 11 by 17 inches
quarto(1104) -- 8.5 by 10.83 inches
}
ScmPrtOutputOffsetStackingType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
Offset stacking types further refining that specified by
the object prtOutputOffsetStacking in the Printer MIB.
- offsetOnJob means that each job is offset but copies within
the job are not offset.
- offsetOnJobAndCopy means that there is an offset on job and
copy boundaries."
REFERENCE "Printer MIB prtOutputOffsetStacking object"
SYNTAX INTEGER {
other(1),
unknown(2),
notSpecified(3),
noOffset(4),
offsetOnJob(5),
offsetOnJobandCopy(6)
}
ScmPrtOutputStaplePosition ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
This Textual Convention enumerates possible staple positions.
The staple positions enumerated are relative to the
physical layout of the finishing device.
The observer is on the front side of the finisher which
is defined as for sheets passing through the finisher.
The 'front' side is the side from which staples are pushed.
The physical corners of the finishing device are specified
by designating the corner of the finisher where a portrait
long-edge fed sheet with english/left-to-right text is stapled
as staplePosCorner1, and then the other corners are numbered
in a counter-clockwise direction with the observer on the
front side of the finisher.
'staplePosCorner1', 'staplePosCorner2', 'staplePosCorner3', and
'staplePosCorner4' indicate a single staple in the specified
corner. This object does not specify the angle of the staple,
e.g. 90, 45 or zero degrees.
'stapleEdge...' indicates multiple staples on the edge
specified. 'stapleEdge12' is the edge which include Corner1
and Corner2.
The current set of values (which may be extended in the future)
is given below:
1 : staplePosCorner1 -- 2**0
2 : staplePosCorner2 -- 2**1
4 : staplePosCorner3 -- 2**2
8 : staplePosCorner4 -- 2**3
16 : stapleEdge12 -- 2**4
32 : stapleEdge23 -- 2**5
64 : stapleEdge34 -- 2**6
128 : stapleEdge14 -- 2**7"
REFERENCE "
See: 'scmPrtOutputStaplePosDefault'
See: 'scmPrtOutputStaplePosSupported'"
SYNTAX INTEGER(0..255)
ScmPrtPageSizeErrorPolicy ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
Controls interpreter behavior when the requested Page Size
is not currently available.
* The values 'other' and 'unknown' are deprecated for
conforming implementations.
* 'abortJob' will cause the interpreter to abort the job
with an appropriate error condition.
* 'ignore' will cause the job to be printed on the default
media as specified by scmPrtInterpInputIndexDefault OR
scmPrtInterpPaperSizeDefault OR any available media
deemed appropriate by the implementation.
No adjustment will be made to the image size.
Exact semantics of this setting are product specific.
* 'interactWithOperator' will cause the printer to interact
with the operator to determine what to do. For example,
display a message at the operator console requesting the
desired media. The semantics of this policy vary among
different products and environments.
* 'useNearestAndAdjust' will cause the job to be printed on
the nearest available media (as described below). The
interpreter will adjust the image size (by scaling and
centering) to fit.
* 'useNextLargerAndAdjust' will cause the job to be printed
on the next larger available media (as described below).
The interpreter will adjust the image size (by scaling and
centering) to fit.
* 'useNearest' will cause the job to be printed on
the nearest available media (as described below).
No adjustment will be made to the image size.
* 'useNextLarger' will cause the job to be printed on
the next larger available media (as described below).
No adjustment will be made to the image size.
* 'ignoreAfterTimeout' will cause the job to be ignored
same as ignore' above, but not till after
scmPrtInterpErrorPolicyTimeout expires.
In the above descriptions, nearest size is defined as the
one closest in area to the requested size. The next larger
size is the one that is at least as large as the requested
size in both width and height and is smallest in area.
To adjust the page means to scale the page image (if
necessary) to fit the medium, then center the image on
the medium."
REFERENCE "
PostScript Language Reference Manual, second edition,
Adobe Systems Incorporated, pp 239-249.
See: ScmPrtMediaTypeErrorPolicy"
SYNTAX INTEGER {
other(1),
unknown(2),
notSpecified(3),
abortJob(4),
ignore(5),
interactWithOperator(6),
useNearestAndAdjust(7),
useNextLargerAndAdjust(8),
useNearest(9),
useNextLarger(10),
ignoreAfterTimeout(11)
}
ScmPrtPCLFontSource ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
"
REFERENCE "
See: PJL Technical Reference Manual- FONTSOURCE"
SYNTAX INTEGER {
other(1),
unknown(2),
notSpecified(3),
internal(20), -- PJL value 'I'
romSimm1(41), -- PJL value 'M1'
romSimm2(42), -- PJL value 'M2'
romSimm3(43), -- PJL value 'M3'
romSimm4(44), -- PJL value 'M4'
romSimm5(45), -- PJL value 'M5'
romSimm6(46), -- PJL value 'M6'
romSimm7(47), -- PJL value 'M7'
romSimm8(48), -- PJL value 'M8'
romSimm9(49), -- PJL value 'M9'
cartridge1(61), -- PJL value 'C1'
cartridge2(62), -- PJL value 'C2'
cartridge3(63), -- PJL value 'C3'
cartridge4(64), -- PJL value 'C4'
cartridge5(65), -- PJL value 'C5'
cartridge6(66), -- PJL value 'C6'
cartridge7(67), -- PJL value 'C7'
cartridge8(68), -- PJL value 'C8'
cartridge9(69), -- PJL value 'C9'
permanentSoft(80) -- PJL value 'S'
}
ScmPrtPlex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
This Textual Convention enumerates plex modes which may
be supported by a printer or interpreter. A plex mode
specifies whether pages are to be printed one-sided or
two-sided, as well as the content orientation between
consecutive pages.
For the ScmPrtPlex TC, the following definitions apply:
'one-sided' - Print on only one side of each sheet.
'two-sided' - Print on both sides of each sheet.
'simplex' - The document pages are to be oriented so as to
condition them for one-sided printing.
'long-edge-bind' - The document pages are to be oriented so
as to condition them for two-sided printing, bound along
the length (the longer edge) of the physical page.
'short-edge-bind' - The document pages are to be oriented so
as to condition them for two-sided printing, bound along
the width (the shorter edge) of the physical page.
ScmPrtPlex's representation is bit-encoded, so that a device
may show multiple plex modes supported. The value zero shall
mean notSpecified.
The following ScmPrtPlex values and meanings are defined:
0x001 simplex, one-sided
0X002 simplex, two-sided
0x010 long-edge-bind, one-sided
0x020 long-edge-bind, two-sided
0x040 short-edge-bind, one-sided
0x080 short-edge-bind, two-sided
The following describes the relationship of the scmPrtPlex
modes to DPA, PostScript and PCL.
DPA:
In DPA, Plex specifies whether the page images of the
output document are to be conditioned for (eventual) one-sided
or two-sided printing, and also specifies whether the
relative orientation between consecutive page-images is to
be altered.
In DPA, the Plex modes specified are named 'Simplex', 'Duplex'
and 'Tumble'. However, 'Duplex' would more accurately be named
bindLongEdge, and 'Tumble' would more accurately be named
bindShortEdge.
As written in DPA, 'Whether the images are portrait or
landscape, the binding edge is parallel to: the y axis for
'duplex', and the x axis for 'tumble'. This last observation
is important for understanding when to use 'tumble'. If the
binding edge of the document is along the y-axis, the plex is
'duplex', whether the orientation is portrait or landscape, and
if the binding-edge is along the x-axis, the plex is 'tumble',
whether the orientation is portrait or landscape.
In DPA, a separate attribute, 'Sides', specifies 1-sided or
2-sided printing.
In DPA, the value of this attribute may also be used by the
presentation processes of some document formats to determine
whether or not to print certain designated pages
(e.g. the extra blank pages needed in two-sided printing to
cause sections to begin on the righthand side of a book, or
recto page).
The following enumerations are relevant to DPA:
simplexOneSided, simplexTwoSided,
bindLongEdgeOneSided, bindLongEdgeTwoSided,
bindShortEdgeOneSided, bindShortEdgeTwoSided.
PostScript:
In PostScript, the keys 'duplex' and 'tumble' are booleans
which specify relative orientation between consecutive pages,
and to the number of sides printed.
If 'Duplex' is False, pages are printed 1-sided, i.e. 'simplex'.
If 'Duplex' is True, pages are printed 2-sided.
(For most PostScript interpreters, only when 'Duplex' is set to
True) 'Tumble' specifies how the page images on opposite
sides of a sheet are oriented with respect to each other.
If 'Tumble' is False, the default user spaces of the two pages
are oriented such that the highest value of y in the two spaces
lie along the same edge of the media. Informally, a Tumble
value of False produces output suitable for binding on the left
or right. When the default user space is set to a portrait
'pagesize', setting Tumble to false is the same as using the
ScmPrtPlex attribute longEdgeBind. When the default user space
is set to a landscape 'pagesize', setting Tumble to false is the
same as using the ScmPrtPlex attribute shortEdgeBind.
If 'Tumble' is True, the default user spaces of the two pages
are oriented such that the highest value of y in the two spaces
lie along opposite edges of the media. Informally, a Tumble
value of True produces output suitable for binding on the top
or bottom. When the default user space is set to a landscape
'pagesize', setting Tumble to true is the same as using the
ScmPrtPlex attribute shortEdgeBind. When the default user space
is set to a landscape 'pagesize', setting Tumble to true is the
same as using the ScmPrtPlex attribute longEdgeBind.
The following ScmPrtPlex enumerations are
relevant to PostScript:
bindLongEdgeOneSided, bindLongEdgeTwoSided,
bindShortEdgeOneSided, bindShortEdgeTwoSided.
Typically (ie, for a Portrait default user space):
OneSided maps to the duplex boolean set to false
TwoSided maps to the duplex boolean set to true
bindEdgeLong maps to the tumble boolean set to false
bindEdgeShort maps to the tumble boolean set to true
PCL:
In PCL, the attributes simplex, duplex long-edge-binding, and
duplex short-edge-binding, along with content orientation,
landscape or portrait, detail the number of sides to be printed,
content orientation, and relative orientation between
consecutive pages. The PCL model matches that of DPA.
The following ScmPrtPlex enumerations are relevant to PCL:
simplexOneSided, bindLongEdgeTwoSided, bindShortEdgeTwoSided."
REFERENCE "
See: ISO/IEC 10175-1:1996(E)
Section 9.3.2.16.2: Plex
Section 9.3.2.19: Sides
See: PostScript Language Reference Manual (2nd Edition)
- PageSize, Duplex, Tumble
See: PCL 5 Printer Language Technical Reference Manual
Simplex/Duplex Print Command"
SYNTAX INTEGER (0..255)
ScmPrtPrintQuality ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
These attributes specify the output quality of the printed
document. Some printers have programmatically controlled output
quality. This attribute allows the user to specify the level of
output quality desired from printers.
The following standard values are defined:
- 'draft' means lowest quality available on the printer.
Uses include increasing the printer's speed and saving
toner.
- 'normal' means normal or intermediate quality on the printer.
- 'high' means highest quality available on the printer."
REFERENCE "
ISO/IEC 10175-1:1996(E)
Section 9.3.2.17: Print-quality"
SYNTAX INTEGER {
other(1),
unknown(2),
notSpecified(3),
draft(4),
normal(5),
high(6)
}
ScmPrtPrintScreen ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
This Textual-Convention enumerates special modes for 80
character screen dumps onto A4 size paper, which is usually
77 characters wide. This function is useful when printing the
80 characters per line width of computer displays.
The PrintScreen mode enables characters to be printed as shown
on the display when PrintScreen is executed from the host.
When mode850 or mode852 is set, the following is done:
- Symbol set value changed to PC-850 or PC-852.
with the current Symbol set value being stored.
- A4 size horizontal printable area expanded to being 80
characters wide.
When the special mode is returned to Off, the following is done:
- Symbol set value returned to the stored SymbolSet Value.
- A4 size horizontal printable area returned to being 77
characters."
SYNTAX INTEGER {
other(1),
unknown(2),
notSpecified(3),
off(4),
mode850(5),
mode852(6)
}
ScmPrtTraySwitch ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
This Textual-Convention enumerates which tray switching
declaration mechanism is used."
REFERENCE "
See: scmPrtInterpTraySwitch
See: scmPrtInputNextPrtInputIndex
See: scmPrtInputAliasTable"
SYNTAX INTEGER {
other(1),
unknown(2),
notSpecified(3),
off(4),
useScmPrtInputNextPrtInputIndex(5),
useScmPrtInputAliasTable(6)
}
--
-- Added per Chuck Adam request 6/13/03
--
ScmPrtGeneralMonoPrintOpt ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
These attributes specify the printing performance /
economy mode setting."
REFERENCE "
See: Phaser 7750 User Guide... for more information "
SYNTAX INTEGER {
other(1),
optimizeForSpeed(3),
optimizeForEconomy(4),
notPresent(5)
}
--
-- The Printer MIB Extensions TC Dumma Group (DO NOT USE)
--
-- DO NOT USE - Present to suppress compiler warnings ONLY!
--
-- Note: The following objects have 'odd' use of case in their
-- names (ie, 'sCm...'), in order to make obvious their related
-- textual conventions
sCmPrintTCDummy OBJECT IDENTIFIER ::= { scmPrintTC 999 }
sCmPrtTCAuxSheetContent OBJECT-TYPE
SYNTAX ScmPrtAuxSheetContent
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 1 }
sCmPrtTCScmPrtAuxSheetType OBJECT-TYPE
SYNTAX ScmPrtAuxSheetType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 2 }
sCmPrtTCTCChannelType OBJECT-TYPE
SYNTAX ScmPrtChannelType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 3 }
sCmPrtTCGroupSupport OBJECT-TYPE
SYNTAX ScmPrtGroupSupport
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 4 }
sCmPrtTCIETFPrintMIBGroupSupport OBJECT-TYPE
SYNTAX ScmPrtIETFPrintMIBGroupSupport
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 5 }
sCmPrtTCInterpreterLangFamily OBJECT-TYPE
SYNTAX ScmPrtInterpreterLangFamily
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 6 }
sCmPrtTCMediaTypeErrorPolicy OBJECT-TYPE
SYNTAX ScmPrtMediaTypeErrorPolicy
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 7 }
sCmPrtTCMediumClassType OBJECT-TYPE
SYNTAX ScmPrtMediumClassType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 8 }
sCmPrtTCMediumSize OBJECT-TYPE
SYNTAX ScmPrtMediumSize
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 9 }
sCmPrtTCOutputOffsetStackingType OBJECT-TYPE
SYNTAX ScmPrtOutputOffsetStackingType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 10 }
sCmPrtOutputStaplePosition OBJECT-TYPE
SYNTAX ScmPrtOutputStaplePosition
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 11 }
sCmPrtTCPageSizeErrorPolicy OBJECT-TYPE
SYNTAX ScmPrtPageSizeErrorPolicy
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 12 }
sCmPrtTCPCLFontSource OBJECT-TYPE
SYNTAX ScmPrtPCLFontSource
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 13 }
sCmPrtTCPlex OBJECT-TYPE
SYNTAX ScmPrtPlex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 14 }
sCmPrtTCPrintQuality OBJECT-TYPE
SYNTAX ScmPrtPrintQuality
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 15 }
sCmPrtTCPrintScreen OBJECT-TYPE
SYNTAX ScmPrtPrintScreen
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 16 }
sCmPrtTCTraySwitch OBJECT-TYPE
SYNTAX ScmPrtTraySwitch
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 17 }
sCmPrtTCGeneralMonoPrintOpt OBJECT-TYPE
SYNTAX ScmPrtGeneralMonoPrintOpt
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dummy - DO NOT USE"
::= { sCmPrintTCDummy 18 }
END
Reference in New Issue View Git Blame Copy Permalink