mirror of
https://github.com/librenms/librenms.git
synced 2024-09-21 18:38:25 +00:00
c7c1ca2c5a
* DKT Comega device support * DKT Comega device support * DKT Comega device support * DKT Comega device support
1240 lines
36 KiB
Plaintext
1240 lines
36 KiB
Plaintext
DKT-GE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32,
|
|
Counter32 FROM SNMPv2-SMI
|
|
OBJECT-GROUP FROM SNMPv2-CONF
|
|
dkt FROM DKT-MIB;
|
|
|
|
geMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200901140000Z"
|
|
ORGANIZATION "DKT A/S"
|
|
CONTACT-INFO
|
|
"postal: DKT A/S
|
|
Fanoevej 6
|
|
DK-4060 Kirke Saaby
|
|
Denmark
|
|
|
|
email: info@dktcomega.com"
|
|
DESCRIPTION "DKT Gigabit MIB."
|
|
::= { dkt 14 }
|
|
|
|
geSwitchEngine OBJECT IDENTIFIER ::= { geMIB 1 }
|
|
|
|
|
|
geATU OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..20480))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dumps the Address Translation Unit (ATU) Switch table in semi colon format"
|
|
::= { geSwitchEngine 1 }
|
|
|
|
geUnicastDelete
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Removes a unicast MAC address from the Address Translation Unit (ATU) Switch table."
|
|
::= { geSwitchEngine 2 }
|
|
|
|
geMulticastDelete
|
|
OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Removes a multicast IP address from the Address Translation Unit (ATU) Switch table."
|
|
::= { geSwitchEngine 3 }
|
|
|
|
geIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is enabled, but has to be configured per port"
|
|
::= { geSwitchEngine 4 }
|
|
|
|
geVTU OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..9600))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dumps the VLAN Table Unit (VTU) Switch table in semi colon format"
|
|
::= { geSwitchEngine 5 }
|
|
|
|
geVLANCreate OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Creates a VLAN, input parameters are: VID:WAN:LAN1:LAN2:LAN3:LAN4:CPU:NRL-ENABLE"
|
|
::= { geSwitchEngine 6 }
|
|
|
|
geVLANDelete OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deletes a VLAN, input parameter is VLAN VID: 0 - 4095"
|
|
::= { geSwitchEngine 7 }
|
|
|
|
geClearVTU OBJECT-TYPE
|
|
SYNTAX INTEGER (1)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clears the VLAN Table Unit (VTU) Switch table, input parameter 1 = clear VTU table"
|
|
::= { geSwitchEngine 8 }
|
|
|
|
geDumpPIRLBuckets OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dumps a list of the active buckets."
|
|
::= { geSwitchEngine 9 }
|
|
|
|
geVLANProviderMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable VLAN provider mode, input parameter 0 = disable VLAN provider mode, 1 = enable VLAN provider mode. Per Default VLAN provider mode is disabled. NOTE: Provider VLAN ID should be setup in port default VID for the originating port."
|
|
::= { geSwitchEngine 10 }
|
|
|
|
gePorts OBJECT IDENTIFIER ::= { geMIB 2 }
|
|
|
|
geCPUPort OBJECT IDENTIFIER ::= { gePorts 1 }
|
|
|
|
geCPUPortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geCPUPort 1 }
|
|
|
|
geCPUPortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Input parameters are: AUTO"
|
|
::= { geCPUPort 2 }
|
|
|
|
|
|
geCPUPortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { geCPUPort 3 }
|
|
|
|
|
|
geCPUPortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geCPUPort 4 }
|
|
|
|
|
|
geCPUPortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { geCPUPort 5 }
|
|
|
|
|
|
geCPUPortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { geCPUPort 6 }
|
|
|
|
geCPUPortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { geCPUPort 7 }
|
|
|
|
|
|
geCPUPortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { geCPUPort 8 }
|
|
|
|
|
|
geCPUPortDisablePIRL2Bucket OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
|
|
::= { geCPUPort 9 }
|
|
|
|
|
|
geCPUPortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { geCPUPort 10 }
|
|
|
|
|
|
geCPUPortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { geCPUPort 11 }
|
|
|
|
|
|
geCPUPortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { geCPUPort 12 }
|
|
|
|
|
|
geCPUPortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geCPUPort 13 }
|
|
|
|
|
|
geCPUPortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { geCPUPort 14 }
|
|
|
|
|
|
geCPUPortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { geCPUPort 15 }
|
|
|
|
|
|
geCPUPortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { geCPUPort 16 }
|
|
|
|
|
|
geCPUPortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { geCPUPort 17 }
|
|
|
|
|
|
geCPUPortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { geCPUPort 18 }
|
|
|
|
|
|
geCPUPortMtu OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MTU size of the port."
|
|
::= { geCPUPort 19 }
|
|
|
|
|
|
|
|
|
|
geWANPort OBJECT IDENTIFIER ::= { gePorts 2 }
|
|
|
|
geWANPortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geWANPort 1 }
|
|
|
|
geWANPortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)"
|
|
::= { geWANPort 2 }
|
|
|
|
|
|
geWANPortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { geWANPort 3 }
|
|
|
|
|
|
geWANPortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geWANPort 4 }
|
|
|
|
|
|
geWANPortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { geWANPort 5 }
|
|
|
|
|
|
geWANPortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { geWANPort 6 }
|
|
|
|
geWANPortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { geWANPort 7 }
|
|
|
|
|
|
geWANPortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { geWANPort 8 }
|
|
|
|
|
|
geWANPortDisablePIRL2Bucket OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
|
|
::= { geWANPort 9 }
|
|
|
|
|
|
geWANPortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { geWANPort 10 }
|
|
|
|
|
|
geWANPortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { geWANPort 11 }
|
|
|
|
|
|
geWANPortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { geWANPort 12 }
|
|
|
|
|
|
geWANPortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geWANPort 13 }
|
|
|
|
|
|
geWANPortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { geWANPort 14 }
|
|
|
|
|
|
geWANPortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { geWANPort 15 }
|
|
|
|
|
|
geWANPortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { geWANPort 16 }
|
|
|
|
|
|
geWANPortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { geWANPort 17 }
|
|
|
|
|
|
geWANPortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { geWANPort 18 }
|
|
|
|
|
|
geWANPortMtu OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MTU size of the port."
|
|
::= { geWANPort 19 }
|
|
|
|
geWANPortArpMirroring OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mirror ARP packets seen on the port to the CPU port."
|
|
::= { geWANPort 20 }
|
|
|
|
|
|
geLAN1Port OBJECT IDENTIFIER ::= { gePorts 3 }
|
|
|
|
geLAN1PortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN1Port 1 }
|
|
|
|
geLAN1PortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)"
|
|
::= { geLAN1Port 2 }
|
|
|
|
|
|
geLAN1PortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { geLAN1Port 3 }
|
|
|
|
|
|
geLAN1PortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN1Port 4 }
|
|
|
|
|
|
geLAN1PortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN1Port 5 }
|
|
|
|
|
|
geLAN1PortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN1Port 6 }
|
|
|
|
geLAN1PortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN1Port 7 }
|
|
|
|
|
|
geLAN1PortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN1Port 8 }
|
|
|
|
|
|
geLAN1PortDisablePIRL2Bucket OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
|
|
::= { geLAN1Port 9 }
|
|
|
|
|
|
geLAN1PortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { geLAN1Port 10 }
|
|
|
|
|
|
geLAN1PortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { geLAN1Port 11 }
|
|
|
|
|
|
geLAN1PortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { geLAN1Port 12 }
|
|
|
|
|
|
geLAN1PortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN1Port 13 }
|
|
|
|
|
|
geLAN1PortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { geLAN1Port 14 }
|
|
|
|
|
|
geLAN1PortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { geLAN1Port 15 }
|
|
|
|
|
|
geLAN1PortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN1Port 16 }
|
|
|
|
|
|
geLAN1PortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { geLAN1Port 17 }
|
|
|
|
|
|
geLAN1PortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { geLAN1Port 18 }
|
|
|
|
|
|
geLAN1PortMtu OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MTU size of the port."
|
|
::= { geLAN1Port 19 }
|
|
|
|
geLAN1PortArpMirroring OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mirror ARP packets seen on the port to the CPU port."
|
|
::= { geLAN1Port 20 }
|
|
|
|
|
|
|
|
geLAN2Port OBJECT IDENTIFIER ::= { gePorts 4 }
|
|
|
|
geLAN2PortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN2Port 1 }
|
|
|
|
geLAN2PortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)"
|
|
::= { geLAN2Port 2 }
|
|
|
|
|
|
geLAN2PortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { geLAN2Port 3 }
|
|
|
|
|
|
geLAN2PortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN2Port 4 }
|
|
|
|
|
|
geLAN2PortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN2Port 5 }
|
|
|
|
|
|
geLAN2PortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN2Port 6 }
|
|
|
|
geLAN2PortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN2Port 7 }
|
|
|
|
|
|
geLAN2PortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN2Port 8 }
|
|
|
|
|
|
geLAN2PortDisablePIRL2Bucket OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
|
|
::= { geLAN2Port 9 }
|
|
|
|
|
|
geLAN2PortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { geLAN2Port 10 }
|
|
|
|
|
|
geLAN2PortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { geLAN2Port 11 }
|
|
|
|
|
|
geLAN2PortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { geLAN2Port 12 }
|
|
|
|
|
|
geLAN2PortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN2Port 13 }
|
|
|
|
|
|
geLAN2PortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { geLAN2Port 14 }
|
|
|
|
|
|
geLAN2PortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { geLAN2Port 15 }
|
|
|
|
|
|
geLAN2PortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN2Port 16 }
|
|
|
|
|
|
geLAN2PortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { geLAN2Port 17 }
|
|
|
|
|
|
geLAN2PortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { geLAN2Port 18 }
|
|
|
|
|
|
geLAN2PortMtu OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MTU size of the port."
|
|
::= { geLAN2Port 19 }
|
|
|
|
geLAN2PortArpMirroring OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mirror ARP packets seen on the port to the CPU port."
|
|
::= { geLAN2Port 20 }
|
|
|
|
|
|
|
|
geLAN3Port OBJECT IDENTIFIER ::= { gePorts 5 }
|
|
|
|
geLAN3PortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN3Port 1 }
|
|
|
|
geLAN3PortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)"
|
|
::= { geLAN3Port 2 }
|
|
|
|
|
|
geLAN3PortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { geLAN3Port 3 }
|
|
|
|
|
|
geLAN3PortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN3Port 4 }
|
|
|
|
|
|
geLAN3PortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN3Port 5 }
|
|
|
|
|
|
geLAN3PortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN3Port 6 }
|
|
|
|
geLAN3PortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN3Port 7 }
|
|
|
|
|
|
geLAN3PortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN3Port 8 }
|
|
|
|
|
|
geLAN3PortDisablePIRL2Bucket OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
|
|
::= { geLAN3Port 9 }
|
|
|
|
|
|
geLAN3PortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { geLAN3Port 10 }
|
|
|
|
|
|
geLAN3PortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { geLAN3Port 11 }
|
|
|
|
|
|
geLAN3PortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { geLAN3Port 12 }
|
|
|
|
|
|
geLAN3PortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN3Port 13 }
|
|
|
|
|
|
geLAN3PortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { geLAN3Port 14 }
|
|
|
|
|
|
geLAN3PortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { geLAN3Port 15 }
|
|
|
|
|
|
geLAN3PortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN3Port 16 }
|
|
|
|
|
|
geLAN3PortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { geLAN3Port 17 }
|
|
|
|
|
|
geLAN3PortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { geLAN3Port 18 }
|
|
|
|
|
|
geLAN3PortMtu OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MTU size of the port."
|
|
::= { geLAN3Port 19 }
|
|
|
|
geLAN3PortArpMirroring OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mirror ARP packets seen on the port to the CPU port."
|
|
::= { geLAN3Port 20 }
|
|
|
|
|
|
|
|
geLAN4Port OBJECT IDENTIFIER ::= { gePorts 6 }
|
|
|
|
geLAN4PortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN4Port 1 }
|
|
|
|
geLAN4PortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)"
|
|
::= { geLAN4Port 2 }
|
|
|
|
|
|
geLAN4PortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { geLAN4Port 3 }
|
|
|
|
|
|
geLAN4PortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN4Port 4 }
|
|
|
|
|
|
geLAN4PortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN4Port 5 }
|
|
|
|
|
|
geLAN4PortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN4Port 6 }
|
|
|
|
geLAN4PortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN4Port 7 }
|
|
|
|
|
|
geLAN4PortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN4Port 8 }
|
|
|
|
|
|
geLAN4PortDisablePIRL2Bucket OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
|
|
::= { geLAN4Port 9 }
|
|
|
|
|
|
geLAN4PortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { geLAN4Port 10 }
|
|
|
|
|
|
geLAN4PortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { geLAN4Port 11 }
|
|
|
|
|
|
geLAN4PortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { geLAN4Port 12 }
|
|
|
|
|
|
geLAN4PortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN4Port 13 }
|
|
|
|
|
|
geLAN4PortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { geLAN4Port 14 }
|
|
|
|
|
|
geLAN4PortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { geLAN4Port 15 }
|
|
|
|
|
|
geLAN4PortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { geLAN4Port 16 }
|
|
|
|
|
|
geLAN4PortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { geLAN4Port 17 }
|
|
|
|
|
|
geLAN4PortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { geLAN4Port 18 }
|
|
|
|
|
|
geLAN4PortMtu OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MTU size of the port."
|
|
::= { geLAN4Port 19 }
|
|
|
|
geLAN4PortArpMirroring OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mirror ARP packets seen on the port to the CPU port."
|
|
::= { geLAN4Port 20 }
|
|
|
|
|
|
|
|
|
|
geModuleGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
geSwitchEngine,
|
|
geATU,
|
|
geUnicastDelete,
|
|
geMulticastDelete,
|
|
geIGMPSnooping,
|
|
geVTU,
|
|
geVLANCreate,
|
|
geVLANDelete,
|
|
geClearVTU,
|
|
geVLANProviderMode,
|
|
gePorts,
|
|
geDumpPIRLBuckets,
|
|
geCPUPort,
|
|
geCPUPortAutoNegotiation, geCPUPortSpeedMode, geCPUPortLinkStatus, geCPUPortFlowControl, geCPUPortIEEEQoSPriority, geCPUPortIPQoSPriority, geCPUPortQoSPortMapRule, geCPUPortVIDNRLEnable, geCPUPortDisablePIRL2Bucket, geCPUPortEgressRateLimitation, geCPUPortIngressRateLimitation, geCPUPortDefaultVLAN, geCPUPortForceDefaultVID, geCPUPortVLANPortMode, geCPUPortBlockAllUnknown, geCPUPortIGMPSnooping, geCPUPortAddUnicast, geCPUPortAddMulticast, geCPUPortMtu,
|
|
geWANPort,
|
|
geWANPortAutoNegotiation, geWANPortSpeedMode, geWANPortLinkStatus, geWANPortFlowControl, geWANPortIEEEQoSPriority, geWANPortIPQoSPriority, geWANPortQoSPortMapRule, geWANPortVIDNRLEnable, geWANPortDisablePIRL2Bucket, geWANPortEgressRateLimitation, geWANPortIngressRateLimitation, geWANPortDefaultVLAN, geWANPortForceDefaultVID, geWANPortVLANPortMode, geWANPortBlockAllUnknown, geWANPortIGMPSnooping, geWANPortAddUnicast, geWANPortAddMulticast, geWANPortMtu, geWANPortArpMirroring,
|
|
geLAN1Port,
|
|
geLAN1PortAutoNegotiation, geLAN1PortSpeedMode, geLAN1PortLinkStatus, geLAN1PortFlowControl, geLAN1PortIEEEQoSPriority, geLAN1PortIPQoSPriority, geLAN1PortQoSPortMapRule, geLAN1PortVIDNRLEnable, geLAN1PortDisablePIRL2Bucket, geLAN1PortEgressRateLimitation, geLAN1PortIngressRateLimitation, geLAN1PortDefaultVLAN, geLAN1PortForceDefaultVID, geLAN1PortVLANPortMode, geLAN1PortBlockAllUnknown, geLAN1PortIGMPSnooping, geLAN1PortAddUnicast, geLAN1PortAddMulticast, geLAN1PortMtu, geLAN1PortArpMirroring,
|
|
geLAN2Port,
|
|
geLAN2PortAutoNegotiation, geLAN2PortSpeedMode, geLAN2PortLinkStatus, geLAN2PortFlowControl, geLAN2PortIEEEQoSPriority, geLAN2PortIPQoSPriority, geLAN2PortQoSPortMapRule, geLAN2PortVIDNRLEnable, geLAN2PortDisablePIRL2Bucket, geLAN2PortEgressRateLimitation, geLAN2PortIngressRateLimitation, geLAN2PortDefaultVLAN, geLAN2PortForceDefaultVID, geLAN2PortVLANPortMode, geLAN2PortBlockAllUnknown, geLAN2PortIGMPSnooping, geLAN2PortAddUnicast, geLAN2PortAddMulticast, geLAN2PortMtu, geLAN2PortArpMirroring,
|
|
geLAN3Port,
|
|
geLAN3PortAutoNegotiation, geLAN3PortSpeedMode, geLAN3PortLinkStatus, geLAN3PortFlowControl, geLAN3PortIEEEQoSPriority, geLAN3PortIPQoSPriority, geLAN3PortQoSPortMapRule, geLAN3PortVIDNRLEnable, geLAN3PortDisablePIRL2Bucket, geLAN3PortEgressRateLimitation, geLAN3PortIngressRateLimitation, geLAN3PortDefaultVLAN, geLAN3PortForceDefaultVID, geLAN3PortVLANPortMode, geLAN3PortBlockAllUnknown, geLAN3PortIGMPSnooping, geLAN3PortAddUnicast, geLAN3PortAddMulticast, geLAN3PortMtu, geLAN3PortArpMirroring,
|
|
geLAN4Port,
|
|
geLAN4PortAutoNegotiation, geLAN4PortSpeedMode, geLAN4PortLinkStatus, geLAN4PortFlowControl, geLAN4PortIEEEQoSPriority, geLAN4PortIPQoSPriority, geLAN4PortQoSPortMapRule, geLAN4PortVIDNRLEnable, geLAN4PortDisablePIRL2Bucket, geLAN4PortEgressRateLimitation, geLAN4PortIngressRateLimitation, geLAN4PortDefaultVLAN, geLAN4PortForceDefaultVID, geLAN4PortVLANPortMode, geLAN4PortBlockAllUnknown, geLAN4PortIGMPSnooping, geLAN4PortAddUnicast, geLAN4PortAddMulticast, geLAN4PortMtu, geLAN4PortArpMirroring
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The objects are related to the DKTCOMEGA Gigabit module, MIB rev 02_00."
|
|
::= { geMIB 4 }
|
|
|
|
|
|
END
|