mirror of
https://github.com/librenms/librenms.git
synced 2024-09-21 18:38:25 +00:00
c7c1ca2c5a
* DKT Comega device support * DKT Comega device support * DKT Comega device support * DKT Comega device support
1416 lines
43 KiB
Plaintext
1416 lines
43 KiB
Plaintext
DKT-FE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32,
|
|
Counter32 FROM SNMPv2-SMI
|
|
OBJECT-GROUP FROM SNMPv2-CONF
|
|
dkt FROM DKT-MIB;
|
|
|
|
feMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200812170000Z"
|
|
ORGANIZATION "DKT A/S"
|
|
CONTACT-INFO
|
|
"postal: DKT A/S
|
|
Fanoevej 6
|
|
DK-4060 Kirke Saaby
|
|
Denmark
|
|
|
|
email: info@dktcomega.com"
|
|
DESCRIPTION "DKT Fast Ethernet MIB."
|
|
::= { dkt 12 }
|
|
|
|
feSwitchEngine OBJECT IDENTIFIER ::= { feMIB 1 }
|
|
|
|
|
|
feATU OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..20480))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dumps the Address Translation Unit (ATU) Switch table in semi colon format"
|
|
::= { feSwitchEngine 1 }
|
|
|
|
feUnicastDelete
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Removes a unicast MAC address from the Address Translation Unit (ATU) Switch table."
|
|
::= { feSwitchEngine 2 }
|
|
|
|
feMulticastDelete
|
|
OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Removes a multicast IP address from the Address Translation Unit (ATU) Switch table."
|
|
::= { feSwitchEngine 3 }
|
|
|
|
feIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is enabled, but has to be configured per port"
|
|
::= { feSwitchEngine 4 }
|
|
|
|
feVTU OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..9600))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dumps the VLAN Table Unit (VTU) Switch table in semi colon format"
|
|
::= { feSwitchEngine 5 }
|
|
|
|
feVLANCreate OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Creates a VLAN, input parameters are: VID:WAN:LAN1:LAN2:LAN3:LAN4:CPU:NRL-ENABLE"
|
|
::= { feSwitchEngine 6 }
|
|
|
|
feVLANDelete OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deletes a VLAN, input parameter is VLAN VID: 0 - 4095"
|
|
::= { feSwitchEngine 7 }
|
|
|
|
feClearVTU OBJECT-TYPE
|
|
SYNTAX INTEGER (1)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clears the VLAN Table Unit (VTU) Switch table, input parameter 1 = clear VTU table"
|
|
::= { feSwitchEngine 8 }
|
|
|
|
feDumpPIRLBuckets OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dumps a list of the active buckets."
|
|
::= { feSwitchEngine 9 }
|
|
|
|
feDisablePIRLBucket OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Disables an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 11."
|
|
::= { feSwitchEngine 10 }
|
|
|
|
feVLANProviderMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable VLAN provider mode, input parameter 0 = disable VLAN provider mode, 1 = enable VLAN provider mode. Per Default VLAN provider mode is disabled. NOTE: Provider VLAN ID should be setup in port default VID for the originating port."
|
|
::= { feSwitchEngine 11 }
|
|
|
|
fePorts OBJECT IDENTIFIER ::= { feMIB 2 }
|
|
|
|
feCPUPort OBJECT IDENTIFIER ::= { fePorts 1 }
|
|
|
|
feCPUPortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feCPUPort 1 }
|
|
|
|
feCPUPortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Input parameters are: 100FD|100HD|10FD|10HD|AUTO|FD|HD"
|
|
::= { feCPUPort 2 }
|
|
|
|
|
|
feCPUPortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { feCPUPort 3 }
|
|
|
|
|
|
feCPUPortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feCPUPort 4 }
|
|
|
|
|
|
feCPUPortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { feCPUPort 5 }
|
|
|
|
|
|
feCPUPortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { feCPUPort 6 }
|
|
|
|
feCPUPortFramePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1."
|
|
::= { feCPUPort 7 }
|
|
|
|
|
|
feCPUPortQueuePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1."
|
|
::= { feCPUPort 8 }
|
|
|
|
|
|
feCPUPortQueuePriority OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 "
|
|
::= { feCPUPort 9 }
|
|
|
|
|
|
feCPUPortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { feCPUPort 10 }
|
|
|
|
|
|
feCPUPortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { feCPUPort 11 }
|
|
|
|
|
|
feCPUPortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feCPUPort 12 }
|
|
|
|
|
|
feCPUPortDeletePortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feCPUPort 13 }
|
|
|
|
|
|
feCPUPortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { feCPUPort 14 }
|
|
|
|
|
|
feCPUPortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { feCPUPort 15 }
|
|
|
|
|
|
feCPUPortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { feCPUPort 16 }
|
|
|
|
|
|
feCPUPortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feCPUPort 17 }
|
|
|
|
|
|
feCPUPortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { feCPUPort 18 }
|
|
|
|
|
|
feCPUPortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { feCPUPort 19 }
|
|
|
|
|
|
feCPUPortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { feCPUPort 20 }
|
|
|
|
|
|
feCPUPortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { feCPUPort 21 }
|
|
|
|
|
|
feCPUPortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { feCPUPort 22 }
|
|
|
|
|
|
|
|
|
|
feWANPort OBJECT IDENTIFIER ::= { fePorts 2 }
|
|
|
|
feWANPortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feWANPort 1 }
|
|
|
|
feWANPortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)"
|
|
::= { feWANPort 2 }
|
|
|
|
|
|
feWANPortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { feWANPort 3 }
|
|
|
|
|
|
feWANPortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feWANPort 4 }
|
|
|
|
|
|
feWANPortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { feWANPort 5 }
|
|
|
|
|
|
feWANPortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { feWANPort 6 }
|
|
|
|
feWANPortFramePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1."
|
|
::= { feWANPort 7 }
|
|
|
|
|
|
feWANPortQueuePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1."
|
|
::= { feWANPort 8 }
|
|
|
|
|
|
feWANPortQueuePriority OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 "
|
|
::= { feWANPort 9 }
|
|
|
|
|
|
feWANPortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { feWANPort 10 }
|
|
|
|
|
|
feWANPortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { feWANPort 11 }
|
|
|
|
|
|
feWANPortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feWANPort 12 }
|
|
|
|
|
|
feWANPortDeletePortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feWANPort 13 }
|
|
|
|
|
|
feWANPortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { feWANPort 14 }
|
|
|
|
|
|
feWANPortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { feWANPort 15 }
|
|
|
|
|
|
feWANPortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { feWANPort 16 }
|
|
|
|
|
|
feWANPortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feWANPort 17 }
|
|
|
|
|
|
feWANPortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { feWANPort 18 }
|
|
|
|
|
|
feWANPortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { feWANPort 19 }
|
|
|
|
|
|
feWANPortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { feWANPort 20 }
|
|
|
|
|
|
feWANPortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { feWANPort 21 }
|
|
|
|
|
|
feWANPortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { feWANPort 22 }
|
|
|
|
|
|
feWANPortArpMirroring OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mirror ARP packets seen on the port to the CPU port."
|
|
::= { feWANPort 23 }
|
|
|
|
|
|
feLAN1Port OBJECT IDENTIFIER ::= { fePorts 3 }
|
|
|
|
feLAN1PortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN1Port 1 }
|
|
|
|
feLAN1PortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)"
|
|
::= { feLAN1Port 2 }
|
|
|
|
|
|
feLAN1PortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { feLAN1Port 3 }
|
|
|
|
|
|
feLAN1PortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN1Port 4 }
|
|
|
|
|
|
feLAN1PortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN1Port 5 }
|
|
|
|
|
|
feLAN1PortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN1Port 6 }
|
|
|
|
feLAN1PortFramePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1."
|
|
::= { feLAN1Port 7 }
|
|
|
|
|
|
feLAN1PortQueuePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1."
|
|
::= { feLAN1Port 8 }
|
|
|
|
|
|
feLAN1PortQueuePriority OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 "
|
|
::= { feLAN1Port 9 }
|
|
|
|
|
|
feLAN1PortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN1Port 10 }
|
|
|
|
|
|
feLAN1PortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN1Port 11 }
|
|
|
|
|
|
feLAN1PortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feLAN1Port 12 }
|
|
|
|
|
|
feLAN1PortDeletePortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feLAN1Port 13 }
|
|
|
|
|
|
feLAN1PortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { feLAN1Port 14 }
|
|
|
|
|
|
feLAN1PortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { feLAN1Port 15 }
|
|
|
|
|
|
feLAN1PortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { feLAN1Port 16 }
|
|
|
|
|
|
feLAN1PortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN1Port 17 }
|
|
|
|
|
|
feLAN1PortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { feLAN1Port 18 }
|
|
|
|
|
|
feLAN1PortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { feLAN1Port 19 }
|
|
|
|
|
|
feLAN1PortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN1Port 20 }
|
|
|
|
|
|
feLAN1PortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { feLAN1Port 21 }
|
|
|
|
|
|
feLAN1PortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { feLAN1Port 22 }
|
|
|
|
|
|
feLAN1PortArpMirroring OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mirror ARP packets seen on the port to the CPU port."
|
|
::= { feLAN1Port 23 }
|
|
|
|
|
|
|
|
feLAN2Port OBJECT IDENTIFIER ::= { fePorts 4 }
|
|
|
|
feLAN2PortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN2Port 1 }
|
|
|
|
feLAN2PortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)"
|
|
::= { feLAN2Port 2 }
|
|
|
|
|
|
feLAN2PortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { feLAN2Port 3 }
|
|
|
|
|
|
feLAN2PortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN2Port 4 }
|
|
|
|
|
|
feLAN2PortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN2Port 5 }
|
|
|
|
|
|
feLAN2PortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN2Port 6 }
|
|
|
|
feLAN2PortFramePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1."
|
|
::= { feLAN2Port 7 }
|
|
|
|
|
|
feLAN2PortQueuePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1."
|
|
::= { feLAN2Port 8 }
|
|
|
|
|
|
feLAN2PortQueuePriority OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 "
|
|
::= { feLAN2Port 9 }
|
|
|
|
|
|
feLAN2PortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN2Port 10 }
|
|
|
|
|
|
feLAN2PortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN2Port 11 }
|
|
|
|
|
|
feLAN2PortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feLAN2Port 12 }
|
|
|
|
|
|
feLAN2PortDeletePortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feLAN2Port 13 }
|
|
|
|
|
|
feLAN2PortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { feLAN2Port 14 }
|
|
|
|
|
|
feLAN2PortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { feLAN2Port 15 }
|
|
|
|
|
|
feLAN2PortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { feLAN2Port 16 }
|
|
|
|
|
|
feLAN2PortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN2Port 17 }
|
|
|
|
|
|
feLAN2PortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { feLAN2Port 18 }
|
|
|
|
|
|
feLAN2PortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { feLAN2Port 19 }
|
|
|
|
|
|
feLAN2PortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN2Port 20 }
|
|
|
|
|
|
feLAN2PortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { feLAN2Port 21 }
|
|
|
|
|
|
feLAN2PortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { feLAN2Port 22 }
|
|
|
|
|
|
feLAN2PortArpMirroring OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mirror ARP packets seen on the port to the CPU port."
|
|
::= { feLAN2Port 23 }
|
|
|
|
|
|
feLAN3Port OBJECT IDENTIFIER ::= { fePorts 5 }
|
|
|
|
feLAN3PortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN3Port 1 }
|
|
|
|
feLAN3PortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)"
|
|
::= { feLAN3Port 2 }
|
|
|
|
|
|
feLAN3PortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { feLAN3Port 3 }
|
|
|
|
|
|
feLAN3PortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN3Port 4 }
|
|
|
|
|
|
feLAN3PortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN3Port 5 }
|
|
|
|
|
|
feLAN3PortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN3Port 6 }
|
|
|
|
feLAN3PortFramePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1."
|
|
::= { feLAN3Port 7 }
|
|
|
|
|
|
feLAN3PortQueuePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1."
|
|
::= { feLAN3Port 8 }
|
|
|
|
|
|
feLAN3PortQueuePriority OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 "
|
|
::= { feLAN3Port 9 }
|
|
|
|
|
|
feLAN3PortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN3Port 10 }
|
|
|
|
|
|
feLAN3PortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN3Port 11 }
|
|
|
|
|
|
feLAN3PortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feLAN3Port 12 }
|
|
|
|
|
|
feLAN3PortDeletePortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feLAN3Port 13 }
|
|
|
|
|
|
feLAN3PortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { feLAN3Port 14 }
|
|
|
|
|
|
feLAN3PortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { feLAN3Port 15 }
|
|
|
|
|
|
feLAN3PortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { feLAN3Port 16 }
|
|
|
|
|
|
feLAN3PortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN3Port 17 }
|
|
|
|
|
|
feLAN3PortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { feLAN3Port 18 }
|
|
|
|
|
|
feLAN3PortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { feLAN3Port 19 }
|
|
|
|
|
|
feLAN3PortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN3Port 20 }
|
|
|
|
|
|
feLAN3PortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { feLAN3Port 21 }
|
|
|
|
|
|
feLAN3PortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { feLAN3Port 22 }
|
|
|
|
|
|
feLAN3PortArpMirroring OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mirror ARP packets seen on the port to the CPU port."
|
|
::= { feLAN3Port 23 }
|
|
|
|
|
|
feLAN4Port OBJECT IDENTIFIER ::= { fePorts 6 }
|
|
|
|
feLAN4PortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN4Port 1 }
|
|
|
|
feLAN4PortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)"
|
|
::= { feLAN4Port 2 }
|
|
|
|
|
|
feLAN4PortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { feLAN4Port 3 }
|
|
|
|
|
|
feLAN4PortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN4Port 4 }
|
|
|
|
|
|
feLAN4PortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN4Port 5 }
|
|
|
|
|
|
feLAN4PortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN4Port 6 }
|
|
|
|
feLAN4PortFramePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1."
|
|
::= { feLAN4Port 7 }
|
|
|
|
|
|
feLAN4PortQueuePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1."
|
|
::= { feLAN4Port 8 }
|
|
|
|
|
|
feLAN4PortQueuePriority OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 "
|
|
::= { feLAN4Port 9 }
|
|
|
|
|
|
feLAN4PortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN4Port 10 }
|
|
|
|
|
|
feLAN4PortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN4Port 11 }
|
|
|
|
|
|
feLAN4PortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feLAN4Port 12 }
|
|
|
|
|
|
feLAN4PortDeletePortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feLAN4Port 13 }
|
|
|
|
|
|
feLAN4PortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { feLAN4Port 14 }
|
|
|
|
|
|
feLAN4PortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { feLAN4Port 15 }
|
|
|
|
|
|
feLAN4PortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { feLAN4Port 16 }
|
|
|
|
|
|
feLAN4PortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN4Port 17 }
|
|
|
|
|
|
feLAN4PortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { feLAN4Port 18 }
|
|
|
|
|
|
feLAN4PortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { feLAN4Port 19 }
|
|
|
|
|
|
feLAN4PortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN4Port 20 }
|
|
|
|
|
|
feLAN4PortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { feLAN4Port 21 }
|
|
|
|
|
|
feLAN4PortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { feLAN4Port 22}
|
|
|
|
feLAN4PortArpMirroring OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mirror ARP packets seen on the port to the CPU port."
|
|
::= { feLAN4Port 23 }
|
|
|
|
|
|
|
|
|
|
feModuleGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
feSwitchEngine,
|
|
feATU,
|
|
feUnicastDelete,
|
|
feMulticastDelete,
|
|
feIGMPSnooping,
|
|
feVTU,
|
|
feVLANCreate,
|
|
feVLANDelete,
|
|
feClearVTU,
|
|
feDumpPIRLBuckets,
|
|
feDisablePIRLBucket,
|
|
feVLANProviderMode,
|
|
fePorts,
|
|
feCPUPort,
|
|
feCPUPortAutoNegotiation, feCPUPortSpeedMode, feCPUPortLinkStatus, feCPUPortFlowControl, feCPUPortIEEEQoSPriority, feCPUPortIPQoSPriority, feCPUPortFramePriorityOverwrite, feCPUPortQueuePriorityOverwrite, feCPUPortQueuePriority, feCPUPortQoSPortMapRule, feCPUPortVIDNRLEnable, feCPUPortMap2PIRL, feCPUPortDeletePortMap2PIRL, feCPUPortEgressRateLimitation, feCPUPortIngressRateLimitation, feCPUPortDefaultVLAN, feCPUPortForceDefaultVID, feCPUPortVLANPortMode, feCPUPortBlockAllUnknown, feCPUPortIGMPSnooping, feCPUPortAddUnicast, feCPUPortAddMulticast,
|
|
feWANPort,
|
|
feWANPortAutoNegotiation, feWANPortSpeedMode, feWANPortLinkStatus, feWANPortFlowControl, feWANPortIEEEQoSPriority, feWANPortIPQoSPriority, feWANPortFramePriorityOverwrite, feWANPortQueuePriorityOverwrite, feWANPortQueuePriority, feWANPortQoSPortMapRule, feWANPortVIDNRLEnable, feWANPortMap2PIRL, feWANPortDeletePortMap2PIRL, feWANPortEgressRateLimitation, feWANPortIngressRateLimitation, feWANPortDefaultVLAN, feWANPortForceDefaultVID, feWANPortVLANPortMode, feWANPortBlockAllUnknown, feWANPortIGMPSnooping, feWANPortAddUnicast, feWANPortAddMulticast, feWANPortArpMirroring,
|
|
feLAN1Port,
|
|
feLAN1PortAutoNegotiation, feLAN1PortSpeedMode, feLAN1PortLinkStatus, feLAN1PortFlowControl, feLAN1PortIEEEQoSPriority, feLAN1PortIPQoSPriority, feLAN1PortFramePriorityOverwrite, feLAN1PortQueuePriorityOverwrite, feLAN1PortQueuePriority, feLAN1PortQoSPortMapRule, feLAN1PortVIDNRLEnable, feLAN1PortMap2PIRL, feLAN1PortDeletePortMap2PIRL, feLAN1PortEgressRateLimitation, feLAN1PortIngressRateLimitation, feLAN1PortDefaultVLAN, feLAN1PortForceDefaultVID, feLAN1PortVLANPortMode, feLAN1PortBlockAllUnknown, feLAN1PortIGMPSnooping, feLAN1PortAddUnicast, feLAN1PortAddMulticast, feLAN1PortArpMirroring,
|
|
feLAN2Port,
|
|
feLAN2PortAutoNegotiation, feLAN2PortSpeedMode, feLAN2PortLinkStatus, feLAN2PortFlowControl, feLAN2PortIEEEQoSPriority, feLAN2PortIPQoSPriority, feLAN2PortFramePriorityOverwrite, feLAN2PortQueuePriorityOverwrite, feLAN2PortQueuePriority, feLAN2PortQoSPortMapRule, feLAN2PortVIDNRLEnable, feLAN2PortMap2PIRL, feLAN2PortDeletePortMap2PIRL, feLAN2PortEgressRateLimitation, feLAN2PortIngressRateLimitation, feLAN2PortDefaultVLAN, feLAN2PortForceDefaultVID, feLAN2PortVLANPortMode, feLAN2PortBlockAllUnknown, feLAN2PortIGMPSnooping, feLAN2PortAddUnicast, feLAN2PortAddMulticast, feLAN2PortArpMirroring,
|
|
feLAN3Port,
|
|
feLAN3PortAutoNegotiation, feLAN3PortSpeedMode, feLAN3PortLinkStatus, feLAN3PortFlowControl, feLAN3PortIEEEQoSPriority, feLAN3PortIPQoSPriority, feLAN3PortFramePriorityOverwrite, feLAN3PortQueuePriorityOverwrite, feLAN3PortQueuePriority, feLAN3PortQoSPortMapRule, feLAN3PortVIDNRLEnable, feLAN3PortMap2PIRL, feLAN3PortDeletePortMap2PIRL, feLAN3PortEgressRateLimitation, feLAN3PortIngressRateLimitation, feLAN3PortDefaultVLAN, feLAN3PortForceDefaultVID, feLAN3PortVLANPortMode, feLAN3PortBlockAllUnknown, feLAN3PortIGMPSnooping, feLAN3PortAddUnicast, feLAN3PortAddMulticast, feLAN3PortArpMirroring,
|
|
feLAN4Port,
|
|
feLAN4PortAutoNegotiation, feLAN4PortSpeedMode, feLAN4PortLinkStatus, feLAN4PortFlowControl, feLAN4PortIEEEQoSPriority, feLAN4PortIPQoSPriority, feLAN4PortFramePriorityOverwrite, feLAN4PortQueuePriorityOverwrite, feLAN4PortQueuePriority, feLAN4PortQoSPortMapRule, feLAN4PortVIDNRLEnable, feLAN4PortMap2PIRL, feLAN4PortDeletePortMap2PIRL, feLAN4PortEgressRateLimitation, feLAN4PortIngressRateLimitation, feLAN4PortDefaultVLAN, feLAN4PortForceDefaultVID, feLAN4PortVLANPortMode, feLAN4PortBlockAllUnknown, feLAN4PortIGMPSnooping, feLAN4PortAddUnicast, feLAN4PortAddMulticast, feLAN4PortArpMirroring
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The objects are related to the DKTCOMEGA Fast Ethernet module, MIB rev 02_00."
|
|
::= { feMIB 4 }
|
|
|
|
|
|
END
|
|
|
|
|
|
|