mirror of
https://github.com/librenms/librenms.git
synced 2024-10-01 07:16:52 +00:00
02b3530f38
git-svn-id: http://www.observium.org/svn/observer/trunk@1575 61d68cd4-352d-0410-923a-c4978735b2b8
10348 lines
383 KiB
Plaintext
10348 lines
383 KiB
Plaintext
NETLINK-SPECIFIC-MIB DEFINITIONS ::= BEGIN
|
||
|
||
-- **************************************************************************
|
||
-- * *
|
||
-- * CSI Netlink *
|
||
-- * *
|
||
-- * File: netlink-mib.txt *
|
||
-- * Release: 4.0.0 (with some pre 4.0.2 Voice Additions *
|
||
-- * Release Date: April 3, 1998 *
|
||
-- * *
|
||
-- **************************************************************************
|
||
-- * *
|
||
-- * Copyright (c) 1998 by CSI Netlink. All rights reserved. No part of *
|
||
-- * this work covered by copyrights herein may be reproduced or copied in *
|
||
-- * any form or by any means - electronic, graphic, or mechanical, *
|
||
-- * including photocopying, recording, taping, or using information and *
|
||
-- * retrieval systems - without prior written permission from CSI Netlink. *
|
||
-- * *
|
||
-- * This is proprietary information which is protected by copyright. *
|
||
-- * Netlink, FRX4000 (TM), FRX6000 (TM), FRX7000 (TM), and FRX8000 (TM) *
|
||
-- * are trademarks of Cabletron Systems, Inc. NetFRAD (TM) and OmniLinx *
|
||
-- * Switch (TM) are trademarks of CSI Netlink. All other product *
|
||
-- * designations are the property of their respective owners. *
|
||
-- * *
|
||
-- **************************************************************************
|
||
|
||
IMPORTS
|
||
OBJECT-TYPE
|
||
FROM RFC-1212
|
||
RowStatus, MacAddress, TimeInterval
|
||
FROM SNMPv2-TC
|
||
mib-2, DisplayString, PhysAddress
|
||
FROM RFC1213-MIB
|
||
enterprises, mgmt, TimeTicks, Gauge, Counter, IpAddress, NetworkAddress
|
||
FROM RFC1155-SMI;
|
||
|
||
-- This MIB module uses the extended OBJECT-TYPE macro as
|
||
-- defined in RFC 1212.
|
||
|
||
-- textual conventions
|
||
|
||
-- DisplayString ::= OCTET STRING
|
||
-- This data type is used to model textual information taken
|
||
-- from the NVT ASCII character set. By convention, objects
|
||
-- with this syntax are declared as having
|
||
--
|
||
-- SIZE (0..255)
|
||
|
||
-- PhysAddress ::= OCTET STRING
|
||
-- This data type is used to model media addresses. For many
|
||
-- types of media, this will be in a binary representation.
|
||
-- For example, an ethernet address would be represented as
|
||
-- a string of 6 octets.
|
||
|
||
NlSubscriberAddress ::= OCTET STRING (SIZE(1..15))
|
||
-- this should really be a X121Address, which is defined in RFC 1382 as
|
||
-- X121Address ::= OCTET STRING (SIZE(0..17))
|
||
-- 0 to 17 bytes in length containing the ASCII
|
||
-- characters [0-9], each octet contains one digit
|
||
-- of the address.
|
||
-- Since we only support non-TOA/NPI type addresses (see X.25 Blue Book)
|
||
-- our addresses are upto 15 digits.
|
||
-- Since we cannot configure empty addresses, the minimum is 1 digit,
|
||
-- which suits us, since indices need at least one component.
|
||
-- NOTE: need to support wildcard characters '?' and '*'.
|
||
-- NOTE: the screen interface allows 'U' and 'G', which is a bug.
|
||
-- Also, since we use it as an index, we could use the binary equivalent
|
||
-- of decimal digits, rather than the ASCII equivalent. But, since digits
|
||
-- besides decimal digits are used (?, *) we prefer the ASCII representation.
|
||
-- This will make usage from most management applications (ie. browsers) a
|
||
-- little more complicated, but no funny mapping is done.
|
||
-- We use the SMI rules for variable-string indexing (first subid specifies
|
||
-- the length, the rest of the subids are big-endian).
|
||
|
||
-- the following RFC 1747 object type is used by the SDLC link station
|
||
-- tables defined in this mib.
|
||
snaDLC OBJECT IDENTIFIER ::= {mib-2 41}
|
||
sdlc OBJECT IDENTIFIER ::= {snaDLC 1}
|
||
sdlcLSGroup OBJECT IDENTIFIER ::= {sdlc 2}
|
||
sdlcLSAdminTable OBJECT IDENTIFIER ::= {sdlcLSGroup 1}
|
||
sdlcLSAdminEntry OBJECT IDENTIFIER ::= {sdlcLSAdminTable 1}
|
||
sdlcLSAddress OBJECT-TYPE
|
||
SYNTAX INTEGER (1..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This value is the poll address of the
|
||
secondary link station for this SDLC link. It
|
||
uniquely identifies the SDLC link station
|
||
within a single SDLC port."
|
||
::= { sdlcLSAdminEntry 1 }
|
||
|
||
netlink OBJECT IDENTIFIER ::= { enterprises 173 }
|
||
|
||
-- ***********************
|
||
-- * THE NETWORK GROUP *
|
||
-- ***********************
|
||
|
||
network OBJECT IDENTIFIER ::= { netlink 6 }
|
||
netstat OBJECT IDENTIFIER ::= { network 1 }
|
||
|
||
--
|
||
-- The netstat group is used to describe network status information for
|
||
-- a node. It only applies to the FRX8000 nodes since the FRX4000s and
|
||
-- FRX6000s have no knowledge of any other nodes.
|
||
--
|
||
|
||
nsMaxNeigh OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Maximum number of neighbor nodes. This value is currently
|
||
always 64 for FRX8000 and 20 for an N7400 or 7500.
|
||
A neighbor is the closest node in a path from the local node."
|
||
::= { netstat 1 }
|
||
|
||
nsThisNode OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "This nodes number. (1-250) "
|
||
::= { netstat 2 }
|
||
|
||
nsNodTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF NsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A table showing all nodes known to this node
|
||
along with status and neighbor information."
|
||
::= { netstat 3 }
|
||
|
||
nsEntry OBJECT-TYPE
|
||
SYNTAX NsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "Each entry of the node table is indexed by
|
||
node number."
|
||
INDEX { nsNodNum }
|
||
::= { nsNodTable 1 }
|
||
|
||
NsEntry ::=
|
||
SEQUENCE {
|
||
nsNodNum
|
||
INTEGER,
|
||
nsStatus
|
||
INTEGER,
|
||
nsNumNeigh
|
||
INTEGER
|
||
}
|
||
|
||
nsNodNum OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The node number of the desired node. This is the
|
||
index into the node table."
|
||
::= { nsEntry 1 }
|
||
|
||
nsStatus OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The operational status of the node. The status is
|
||
given as:
|
||
1 = Node is defined in the database;
|
||
9 = Node is operational;"
|
||
::= { nsEntry 2 }
|
||
|
||
nsNumNeigh OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Current number of neighbor nodes to this node."
|
||
::= { nsEntry 3 }
|
||
|
||
nsNeighTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF NsNeighEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "The neighbor table lists the status of a nodes
|
||
neighbors."
|
||
::= { netstat 4 }
|
||
|
||
nsNeighEntry OBJECT-TYPE
|
||
SYNTAX NsNeighEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "The table entries are indexed by the node number and
|
||
the neighbors node number."
|
||
INDEX { nsNTNode, nsNTNeigh }
|
||
::= { nsNeighTable 1 }
|
||
|
||
NsNeighEntry ::=
|
||
SEQUENCE {
|
||
nsNTNode
|
||
INTEGER,
|
||
nsNTNeigh
|
||
INTEGER,
|
||
nsNTNeighStat
|
||
INTEGER
|
||
}
|
||
|
||
nsNTNode OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The node number of the node whose neighbor's status
|
||
is being sought."
|
||
::= { nsNeighEntry 1 }
|
||
|
||
nsNTNeigh OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The node number of the neighbor whose status is being
|
||
sought."
|
||
::= { nsNeighEntry 2 }
|
||
|
||
nsNTNeighStat OBJECT-TYPE
|
||
SYNTAX INTEGER { notConnected(1),
|
||
connected(2) }
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The status of the neighbor node given as:
|
||
1 = previously, but not currently, connected;
|
||
2 = Currently connected; "
|
||
::= { nsNeighEntry 3 }
|
||
|
||
-- ********************
|
||
-- * THE NODE GROUP *
|
||
-- ********************
|
||
|
||
local OBJECT IDENTIFIER ::= { netlink 7 }
|
||
node OBJECT IDENTIFIER ::= { local 1 }
|
||
nodeCfgTable OBJECT IDENTIFIER ::= { node 1 }
|
||
nodeAlmTable OBJECT IDENTIFIER ::= { node 2 }
|
||
nodeSNMPGroup OBJECT IDENTIFIER ::= { node 3 }
|
||
|
||
--
|
||
-- The NODE group is used to describe configuration of the node
|
||
--
|
||
|
||
nodeModel OBJECT-TYPE
|
||
SYNTAX INTEGER { model1(1),
|
||
model2(2),
|
||
rackmount(3),
|
||
highavail(4),
|
||
netfrad(5),
|
||
frx4000(6),
|
||
ss1800(7)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Describes the unit model"
|
||
::= { nodeSNMPGroup 1 }
|
||
|
||
--
|
||
-- The Traps group provides information about Traps on the node
|
||
--
|
||
|
||
nodeTrapText OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Text of the last alarm generated"
|
||
::= { nodeSNMPGroup 2 }
|
||
|
||
nodeTrapAdrTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TpAdrEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A table used to define the IP address of end-nodes
|
||
to receive alarms generated by this node. Up to 16 addresses
|
||
can be specified."
|
||
::= { nodeSNMPGroup 3 }
|
||
|
||
tpAdrEntry OBJECT-TYPE
|
||
SYNTAX TpAdrEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Trap entry containing objects relating to SNMP traps."
|
||
INDEX { tpAdrIdx }
|
||
::= { nodeTrapAdrTable 1 }
|
||
|
||
TpAdrEntry ::=
|
||
SEQUENCE {
|
||
tpAdrIdx
|
||
INTEGER,
|
||
tpAddress
|
||
IpAddress,
|
||
tpAdrFlag
|
||
INTEGER,
|
||
tpAdrSLev
|
||
INTEGER
|
||
}
|
||
tpAdrIdx OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The index into the trap configuration table"
|
||
::= { tpAdrEntry 1 }
|
||
|
||
tpAddress OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The IP Address of the end-station to send alarms"
|
||
::= { tpAdrEntry 2 }
|
||
|
||
tpAdrFlag OBJECT-TYPE
|
||
SYNTAX INTEGER { disableTraps(1),
|
||
enableTraps(2),
|
||
delete(3) }
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Defines the state of this entry as:
|
||
0 = Do not send traps to the Address;
|
||
1 = Send traps to the Address;
|
||
2 = This Address entry is deleted from the table; "
|
||
::= { tpAdrEntry 3 }
|
||
|
||
tpAdrSLev OBJECT-TYPE
|
||
SYNTAX INTEGER { critical(1),
|
||
major(2),
|
||
minor(3),
|
||
informational(4) }
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Lowest severity level traps that will be sent to
|
||
this Address; 1 is the highest, 4 is the lowest."
|
||
::= { tpAdrEntry 4 }
|
||
|
||
nodeBagTable OBJECT IDENTIFIER ::= { node 4 }
|
||
|
||
-- *****************************
|
||
-- * THE HARDWARE CARD GROUP *
|
||
-- *****************************
|
||
|
||
hwcard OBJECT IDENTIFIER ::= { local 2 }
|
||
|
||
--
|
||
-- This item describes the Max number of Protocols allowed on each RLP
|
||
--
|
||
|
||
rlpMaxProtos OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Maximum number of protocols allowed on each RLP.
|
||
This value is currently 11 for FRX4000s, 9 for FRX6000s, and
|
||
5 for FRX7000s and FRX8000s."
|
||
::= { hwcard 1 }
|
||
|
||
--
|
||
-- The RLP Table used to describe each RLP on a node
|
||
--
|
||
|
||
rlpConfigTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF RlpEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to describe each RLP on the node"
|
||
::= { hwcard 2 }
|
||
|
||
rlpEntry OBJECT-TYPE
|
||
SYNTAX RlpEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "An RLP entry containing objects relating to RLPs."
|
||
INDEX { rlpIndex }
|
||
::= { rlpConfigTable 1 }
|
||
|
||
RlpEntry ::=
|
||
SEQUENCE {
|
||
rlpIndex
|
||
INTEGER,
|
||
rlpStatus
|
||
INTEGER,
|
||
rlpMemorySize
|
||
INTEGER,
|
||
rlpLIC1Type
|
||
INTEGER,
|
||
rlpLIC2Type
|
||
INTEGER,
|
||
rlpProtocol
|
||
OCTET STRING,
|
||
rlpGroupNumber
|
||
INTEGER,
|
||
rlpGroupResponsibility
|
||
INTEGER
|
||
}
|
||
|
||
rlpIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP number on the node"
|
||
::= { rlpEntry 1 }
|
||
|
||
rlpStatus OBJECT-TYPE
|
||
SYNTAX INTEGER { installed(1),
|
||
configured(2),
|
||
load-failed(3),
|
||
loading(4),
|
||
ipl-failed(5),
|
||
ipl-in-progress(6),
|
||
failed(7),
|
||
operational(8),
|
||
power-off(9),
|
||
power-on(10) }
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The current state of this RLP"
|
||
::= { rlpEntry 2 }
|
||
|
||
rlpMemorySize OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The amount of memory installed on this RLP"
|
||
::= { rlpEntry 3 }
|
||
|
||
rlpLIC1Type OBJECT-TYPE
|
||
SYNTAX INTEGER { none(1),
|
||
rs232(2),
|
||
rs422(3),
|
||
v35(4) ,
|
||
hs-rs232(5),
|
||
x21(6),
|
||
rs449(7),
|
||
universal(8),
|
||
t1(10),
|
||
e1(11),
|
||
voice(13)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Type of Line Interface card in the first position"
|
||
::= { rlpEntry 4 }
|
||
|
||
rlpLIC2Type OBJECT-TYPE
|
||
SYNTAX INTEGER { none(1),
|
||
rs232(2),
|
||
rs422(3),
|
||
v35(4) ,
|
||
hs-rs232(5),
|
||
x21(6),
|
||
rs449(7),
|
||
universal(8),
|
||
t1(10),
|
||
e1(11),
|
||
voice(13)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Type of Line Interface card in the second position"
|
||
::= { rlpEntry 5 }
|
||
|
||
rlpProtocol OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The protocols configured on this RLP. This is an OCTET
|
||
STRING where each octet represents a protocol type. The size of this
|
||
is the maximum number of protocols allowed on an RLP (rlpMaxProtos).
|
||
The protocol types are defined as:
|
||
00 = none
|
||
01 = X.25
|
||
02 = Frame Relay
|
||
03 = Async
|
||
04 = SDLC
|
||
05 = BSC Interactive
|
||
07 = IP
|
||
08 = SNMP
|
||
09 = RIP
|
||
0A = LLC2
|
||
0B = Trunk
|
||
0C = IPX
|
||
0D = Config
|
||
0E = LLC2-R
|
||
0F = IP-R
|
||
10 = NVSP
|
||
11 = Bridge
|
||
"
|
||
::= { rlpEntry 6 }
|
||
|
||
rlpGroupNumber OBJECT-TYPE
|
||
SYNTAX INTEGER (1..4)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The group to which this RLP belongs- always 1 if not
|
||
FRX7000."
|
||
::= { rlpEntry 7 }
|
||
|
||
rlpGroupResponsibility OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
primary (1),
|
||
secondary (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The responsibility of this RLP within its group, always
|
||
primary if not FRX7000."
|
||
::= { rlpEntry 8 }
|
||
|
||
-- ********************
|
||
-- * THE PORT GROUP *
|
||
-- ********************
|
||
|
||
port OBJECT IDENTIFIER ::= { local 3 }
|
||
portX25Group OBJECT IDENTIFIER ::= { port 1 }
|
||
|
||
portPhyX25AdminTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortPhyX25AdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This table contains Netlink Enterprise specific
|
||
objects to manage an X25 port. Changing one of
|
||
these parameters may take effect in the operating
|
||
port immediately or may wait until the interface is
|
||
restarted depending on the details of the
|
||
implementation.
|
||
|
||
Most of the objects in this read-write table have
|
||
corresponding read-only objects in the
|
||
portX25OperTable that return the current
|
||
operating value.
|
||
|
||
The operating values may be different from these
|
||
configured values if a configured parameter was
|
||
configured after the interface was started."
|
||
::= { portX25Group 1 }
|
||
|
||
portPhyX25AdminEntry OBJECT-TYPE
|
||
SYNTAX PortPhyX25AdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of configured values for an X25 port."
|
||
INDEX { nlIfRlp, nlIfPort }
|
||
::= { portPhyX25AdminTable 1 }
|
||
|
||
PortPhyX25AdminEntry ::= SEQUENCE
|
||
{
|
||
portPhyX25AdminConnector INTEGER,
|
||
portPhyX25AdminSpeed INTEGER,
|
||
portPhyX25AdminGenerateClock INTEGER,
|
||
portPhyX25AdminRcvClockFromDTE INTEGER,
|
||
portPhyX25AdminDialOut INTEGER,
|
||
portPhyX25AdminInactivityTimer INTEGER,
|
||
portPhyX25AdminDisconnectTimer INTEGER,
|
||
portPhyX25AdminSetupTimer INTEGER,
|
||
portPhyX25AdminTrunkFlag INTEGER,
|
||
portPhyX25AdminTrunkGroup OCTET STRING,
|
||
portPhyX25AdminRowStatus RowStatus
|
||
}
|
||
|
||
portPhyX25AdminConnector OBJECT-TYPE
|
||
SYNTAX INTEGER{
|
||
rs232 (3),
|
||
v35 (5),
|
||
rs449 (6),
|
||
rs530 (7),
|
||
x21 (8),
|
||
t1 (10),
|
||
e1 (11)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"Physical port interface connector type."
|
||
::= { portPhyX25AdminEntry 1 }
|
||
|
||
portPhyX25AdminSpeed OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the speed of the X25 port. The speed may
|
||
only be set to one of a series of reasonable values, and if an attempt
|
||
is made to set the speed to a value which is within the valid range
|
||
but not equal to one of these values, the speed will be rounded up.
|
||
If the connector type of the port is RS232, the port could be a
|
||
standard port or a high speed port. If the port is a high speed
|
||
RS232 port, the maximum valid speed is 256000. If the port is a
|
||
standard RS232 port, the maximum valid speed is 64000 on the
|
||
FRX4000/SS1840 and 19200 on all other products. It may be possible
|
||
to set the speed of a standard RS232 port to a speed which is valid
|
||
for a high speed RS232 port but invalid for a standard RS232 port.
|
||
In this case, the port may not end up having the invalid speed.
|
||
The default speed for a standard RS232 port on the FRX6000 is 19200."
|
||
DEFVAL { 64000 }
|
||
|
||
::= { portPhyX25AdminEntry 2 }
|
||
|
||
portPhyX25AdminGenerateClock OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"Specifies whether the port will generate the clock
|
||
necessary to synchronize traffic over the link."
|
||
DEFVAL { no }
|
||
::= { portPhyX25AdminEntry 3 }
|
||
|
||
portPhyX25AdminRcvClockFromDTE OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines whether the receive clock
|
||
will be used from the DTE."
|
||
DEFVAL { no }
|
||
::= { portPhyX25AdminEntry 4 }
|
||
|
||
portPhyX25AdminDialOut OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
none(1),
|
||
dialIn(2),
|
||
dialOut(3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This flag indicates whether the port is connected to a dial
|
||
modem, and whethter connections will be initiated through
|
||
dial-in or dial-out calls."
|
||
DEFVAL { none }
|
||
::= { portPhyX25AdminEntry 5 }
|
||
|
||
portPhyX25AdminInactivityTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (1..30)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This timer defines in minutes, the period of inactivity
|
||
allowed between calls. Once the timer expires, the port
|
||
is disabled untill the next call is placed, if a Dial out
|
||
port, or the Disconnect Timer expires, if a Dial in port.
|
||
This variable is only meaningful if the port is a Dial port."
|
||
DEFVAL { 5 }
|
||
::= { portPhyX25AdminEntry 6 }
|
||
|
||
portPhyX25AdminDisconnectTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (1..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This timer defines, in seconds, the length of time a
|
||
dial-in port will remain disabled after expiration of the
|
||
InActivity Timer."
|
||
DEFVAL { 5 }
|
||
::= { portPhyX25AdminEntry 7 }
|
||
|
||
portPhyX25AdminSetupTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (1..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This timer determines the length of time, in seconds, that
|
||
a response must be received by the port, after entering the
|
||
Linkup state. If a response is not received, the port enters
|
||
a Failed state."
|
||
DEFVAL { 5 }
|
||
::= { portPhyX25AdminEntry 8 }
|
||
|
||
portPhyX25AdminTrunkFlag OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This flag, when set, indicates the port is associated
|
||
with a network trunk group. It will be disabled/enabled
|
||
if the network trunk is not operational."
|
||
DEFVAL { no }
|
||
::= { portPhyX25AdminEntry 9 }
|
||
|
||
portPhyX25AdminTrunkGroup OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable contains a string of 8 bytes, with each
|
||
byte indicating 8 ports on an RLP that may be a part of
|
||
a trunk group. Since a TurboFrad has only 1 RLP, only the
|
||
first byte is valid if the node is an FRX4000. Each
|
||
port is represented by a single bit within the RLP byte.
|
||
The bit position represents the port number...for example,
|
||
if port 2 on RLP 0 was in a trunk group, the first byte of
|
||
the string would contain x04 and all other bytes would be 0."
|
||
::= { portPhyX25AdminEntry 10 }
|
||
|
||
portPhyX25AdminRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the portPhyX25AdminTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device, and which is
|
||
supplied by a management station wishing to exercise an
|
||
on-line update of the existing conceptual row. For a
|
||
management protocol set operation, a genErr response is
|
||
returned when the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { portPhyX25AdminEntry 11 }
|
||
|
||
portPhyX25OperTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortPhyX25OperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This table contains Netlink Enterprise specific
|
||
objects to manage an X25 port. Changing one of
|
||
these parameters may take effect in the operating
|
||
port immediately or may wait until the interface is
|
||
restarted depending on the details of the
|
||
implementation.
|
||
|
||
All of the objects in this table are read-only.
|
||
|
||
The operating values may be different from these
|
||
configured values if a configured parameter was
|
||
configured after the interface was started."
|
||
::= { portX25Group 2 }
|
||
|
||
portPhyX25OperEntry OBJECT-TYPE
|
||
SYNTAX PortPhyX25OperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of configured values for an X25 port."
|
||
INDEX { nlIfRlp, nlIfPort }
|
||
::= { portPhyX25OperTable 1 }
|
||
|
||
PortPhyX25OperEntry ::= SEQUENCE
|
||
{
|
||
portPhyX25OperConnector INTEGER,
|
||
portPhyX25OperSpeed INTEGER,
|
||
portPhyX25OperGenerateClock INTEGER,
|
||
portPhyX25OperRcvClockFromDTE INTEGER,
|
||
portPhyX25OperDialOut INTEGER,
|
||
portPhyX25OperInactivityTimer INTEGER,
|
||
portPhyX25OperDisconnectTimer INTEGER,
|
||
portPhyX25OperSetupTimer INTEGER,
|
||
portPhyX25OperTrunkFlag INTEGER,
|
||
portPhyX25OperTrunkGroup OCTET STRING
|
||
}
|
||
|
||
portPhyX25OperConnector OBJECT-TYPE
|
||
SYNTAX INTEGER{
|
||
rs232 (3),
|
||
v35 (5),
|
||
rs449 (6),
|
||
rs530 (7),
|
||
x21 (8),
|
||
t1 (10),
|
||
e1 (11)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"Physical port interface connector type."
|
||
::= { portPhyX25OperEntry 1 }
|
||
|
||
portPhyX25OperSpeed OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the speed of the X25 port. The speed may
|
||
only be set to one of a series of reasonable values, and if an attempt
|
||
is made to set the speed to a value which is within the valid range
|
||
but not equal to one of these values, the speed will be rounded up.
|
||
If the connector type of the port is RS232, the port could be a
|
||
standard port or a high speed port. If the port is a high speed
|
||
RS232 port, the maximum valid speed is 256000. If the port is a
|
||
standard RS232 port, the maximum valid speed is 64000 on the
|
||
FRX4000/SS1840 and 19200 on all other products. It may be possible
|
||
to set the speed of a standard RS232 port to a speed which is valid
|
||
for a high speed RS232 port but invalid for a standard RS232 port.
|
||
In this case, the port may not end up having the invalid speed.
|
||
The default speed for a standard RS232 port on the FRX6000 is 19200."
|
||
::= { portPhyX25OperEntry 2 }
|
||
|
||
portPhyX25OperGenerateClock OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"Specifies whether the port will generate the clock
|
||
necessary to synchronize traffic over the link."
|
||
::= { portPhyX25OperEntry 3 }
|
||
|
||
portPhyX25OperRcvClockFromDTE OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines whether the receive clock will be
|
||
used from the DTE."
|
||
::= { portPhyX25OperEntry 4 }
|
||
|
||
portPhyX25OperDialOut OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
none(1),
|
||
dialIn(2),
|
||
dialOut(3)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This flag indicates whether the port is connected to a dial
|
||
modem, and whethter connections will be initiated through
|
||
dial-in or dial-out calls."
|
||
::= { portPhyX25OperEntry 5 }
|
||
|
||
portPhyX25OperInactivityTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (1..30)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This timer defines in minutes, the period of inactivity
|
||
allowed between calls. Once the timer expires, the port
|
||
is disabled untill the next call is placed, if a Dial out
|
||
port, or the Disconnect Timer expires, if a Dial in port.
|
||
This variable is only meaningful if the port is a Dial port."
|
||
::= { portPhyX25OperEntry 6 }
|
||
|
||
portPhyX25OperDisconnectTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (1..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This timer defines, in seconds, the length of time a
|
||
dial-in port will remain disabled after expiration of the
|
||
InActivity Timer."
|
||
::= { portPhyX25OperEntry 7 }
|
||
|
||
portPhyX25OperSetupTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (1..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This timer determines the length of time, in seconds, that
|
||
a response must be received by the port, after entering the
|
||
Linkup state. If a response is not received, the port enters
|
||
a Failed state."
|
||
::= { portPhyX25OperEntry 8 }
|
||
|
||
portPhyX25OperTrunkFlag OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This flag, when set, indicates the port is associated
|
||
with a network trunk group. It will be disabled/enabled
|
||
if the network trunk is not operational."
|
||
::= { portPhyX25OperEntry 9 }
|
||
|
||
portPhyX25OperTrunkGroup OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable contains a string of 8 bytes, with each
|
||
byte indicating a port on this RLP that may be a part of
|
||
a trunk group."
|
||
::= { portPhyX25OperEntry 10 }
|
||
|
||
-- Admin Table for X25 logical ports
|
||
|
||
portLogicalX25AdminTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortLogicalX25AdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This table contains Netlink Enterprise specific
|
||
objects to manage an X25 Logical port. Changing one of
|
||
these parameters may take effect in the operating
|
||
port immediately or may wait until the interface is
|
||
restarted depending on the details of the
|
||
implementation.
|
||
|
||
The operating values may be different from these
|
||
configured values if a configured parameter was
|
||
configured after the interface was started."
|
||
::= { portX25Group 3 }
|
||
|
||
portLogicalX25AdminEntry OBJECT-TYPE
|
||
SYNTAX PortLogicalX25AdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of configured values for an X25 logical port."
|
||
INDEX { nlIfRlp, nlIfPhyPort, nlIfPort }
|
||
::= { portLogicalX25AdminTable 1 }
|
||
|
||
PortLogicalX25AdminEntry ::= SEQUENCE
|
||
{
|
||
portLogicalX25AdminFrDlci INTEGER,
|
||
portLogicalX25AdminCxnPriority INTEGER,
|
||
portLogicalX25AdminRfc1490 INTEGER,
|
||
portLogicalX25AdminBAG INTEGER,
|
||
portLogicalX25AdminRowStatus RowStatus
|
||
}
|
||
|
||
portLogicalX25AdminFrDlci OBJECT-TYPE
|
||
SYNTAX INTEGER (16..991)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The DLCI number used to identify the entry in the table. The
|
||
range is 16-991. "
|
||
DEFVAL { 16 }
|
||
::= { portLogicalX25AdminEntry 1 }
|
||
|
||
portLogicalX25AdminCxnPriority OBJECT-TYPE
|
||
SYNTAX INTEGER (0..9)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This field sets the priority of the connection among others on the
|
||
physical port. The range is 0 for lowest priority to 9 for
|
||
the highest priority. "
|
||
DEFVAL { 0 }
|
||
::= { portLogicalX25AdminEntry 2 }
|
||
|
||
portLogicalX25AdminRfc1490 OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
annexG (1),
|
||
rfc1490 (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This field indicates the encapsulation method used"
|
||
DEFVAL { rfc1490 }
|
||
::= { portLogicalX25AdminEntry 3 }
|
||
|
||
portLogicalX25AdminBAG OBJECT-TYPE
|
||
SYNTAX INTEGER (0..16)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"Assigns this DLCI to one of sixteen groups whose parameters
|
||
regulate bandwidth usage. A 0 value indicates the DLCI does
|
||
not use BAGs"
|
||
DEFVAL { 0 }
|
||
::= { portLogicalX25AdminEntry 4 }
|
||
|
||
portLogicalX25AdminRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the portLogicalX25AdminTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device, and which is
|
||
supplied by a management station wishing to exercise an
|
||
on-line update of the existing conceptual row. For a
|
||
management protocol set operation, a genErr response is
|
||
returned when the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { portLogicalX25AdminEntry 5 }
|
||
|
||
-- Oper Table for X25 logical ports
|
||
|
||
portLogicalX25OperTable OBJECT-TYPE
|
||
|
||
SYNTAX SEQUENCE OF PortLogicalX25OperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This table contains Netlink Enterprise specific
|
||
objects to manage an X25 Logical port. Changing one of
|
||
these parameters may take effect in the operating
|
||
port immediately or may wait until the interface is
|
||
restarted depending on the details of the
|
||
implementation.
|
||
|
||
The operating values may be different from these
|
||
configured values if a configured parameter was
|
||
configured after the interface was started."
|
||
::= { portX25Group 4 }
|
||
|
||
portLogicalX25OperEntry OBJECT-TYPE
|
||
SYNTAX PortLogicalX25OperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of configured values for an X25 port."
|
||
INDEX { nlIfRlp, nlIfPhyPort, nlIfPort }
|
||
::= { portLogicalX25OperTable 1 }
|
||
|
||
PortLogicalX25OperEntry ::= SEQUENCE
|
||
{
|
||
portLogicalX25OperFrDlci INTEGER,
|
||
portLogicalX25OperCxnPriority INTEGER,
|
||
portLogicalX25OperRfc1490 INTEGER,
|
||
portLogicalX25OperBAG INTEGER
|
||
}
|
||
|
||
portLogicalX25OperFrDlci OBJECT-TYPE
|
||
SYNTAX INTEGER (1..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The DLCI number used to identify the entry in the table. The
|
||
range is 16-991. "
|
||
|
||
::= { portLogicalX25OperEntry 1 }
|
||
|
||
portLogicalX25OperCxnPriority OBJECT-TYPE
|
||
SYNTAX INTEGER (0..9)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This field sets the priority of the connection among others on the
|
||
physical port. The range is 0 for lowest priority to 9 for
|
||
the highest priority. "
|
||
::= { portLogicalX25OperEntry 2 }
|
||
|
||
portLogicalX25OperRfc1490 OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
annexG (1),
|
||
rfc1490 (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This field indicates the encapsulation method used"
|
||
::= { portLogicalX25OperEntry 3 }
|
||
|
||
portLogicalX25OperBAG OBJECT-TYPE
|
||
SYNTAX INTEGER (1..16)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"Assigns this DLCI to one of sixteen groups whose parameters
|
||
regulate bandwidth usage."
|
||
::= { portLogicalX25OperEntry 4 }
|
||
|
||
-- Admin Table for both logical and physical ports
|
||
--
|
||
|
||
portX25AdminTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortX25AdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This table contains Netlink Enterprise specific
|
||
objects to manage an X25 port. Changing one of
|
||
these parameters may take effect in the operating
|
||
port immediately or may wait until the interface is
|
||
restarted depending on the details of the
|
||
implementation.
|
||
|
||
Most of the objects in this read-write table have
|
||
corresponding read-only objects in the
|
||
portX25OperTable that return the current
|
||
operating value.
|
||
|
||
The operating values may be different from these
|
||
configured values if a configured parameter was
|
||
configured after the interface was started."
|
||
::= { portX25Group 5 }
|
||
|
||
portX25AdminEntry OBJECT-TYPE
|
||
SYNTAX PortX25AdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of configured values for an X25 port."
|
||
INDEX { nlIfRlp, nlIfPort }
|
||
|
||
::= { portX25AdminTable 1 }
|
||
|
||
PortX25AdminEntry ::= SEQUENCE
|
||
{
|
||
portX25AdminBlockedFlag INTEGER,
|
||
portX25AdminFlowCtrlNeg INTEGER,
|
||
portX25AdminThruptClassNeg INTEGER,
|
||
portX25AdminLocChgPrev INTEGER,
|
||
portX25AdminRevChgAccpt INTEGER,
|
||
portX25AdminFastSelAccpt INTEGER,
|
||
portX25AdminInCallBar INTEGER,
|
||
portX25AdminOutCallBar INTEGER,
|
||
portX25AdminMaxPktSize INTEGER,
|
||
portX25AdminDefPktSize INTEGER,
|
||
portX25AdminMaxWinSize INTEGER,
|
||
portX25AdminDefWinSize INTEGER,
|
||
portX25AdminMaxThruptClass INTEGER,
|
||
portX25AdminCUGPref INTEGER,
|
||
portX25AdminCUGIndex INTEGER,
|
||
portX25AdminCUGIncAccess INTEGER,
|
||
portX25AdminCUGOutAccess INTEGER
|
||
}
|
||
|
||
portX25AdminBlockedFlag OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" A flag which when set, means the port should not be
|
||
enabled after a boot-up of the node. "
|
||
DEFVAL { no }
|
||
::= { portX25AdminEntry 1 }
|
||
|
||
portX25AdminFlowCtrlNeg OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A flag which if set, permits negotiation of
|
||
the flow control parameters on a per call basis.
|
||
If N is selected, the default packet and window
|
||
sizes will be used. If Y is selected, the packet
|
||
or window size in a call packet (up to the
|
||
configured Max Packet Size or Max Window Size) is
|
||
used."
|
||
DEFVAL { no }
|
||
::= { portX25AdminEntry 2 }
|
||
|
||
portX25AdminThruptClassNeg OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A flag which ,if set, permists negotiation of
|
||
the throughput class for either direction of
|
||
data transmission on a per call basis. If N is
|
||
selected, the configured Max Throughput Class
|
||
value is used. If Y, any throughput class in
|
||
a call packet (up to the Max Thruput Class) is
|
||
used."
|
||
DEFVAL { no }
|
||
::= { portX25AdminEntry 3 }
|
||
|
||
portX25AdminLocChgPrev OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"If Y is selected, no calls can be charged to
|
||
port. Incoming calls from the network with
|
||
reverse charge specified will be rejected. Outgoing
|
||
calls will insert reverse charge in the call packet
|
||
if not already included."
|
||
DEFVAL { no }
|
||
::= { portX25AdminEntry 4 }
|
||
|
||
portX25AdminRevChgAccpt OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A flag, if set, that authorizes transmission of
|
||
incoming calls that request the reverse charge
|
||
facility. If N is selected, and a call requests
|
||
it, it will not be transmitted."
|
||
DEFVAL { no }
|
||
::= { portX25AdminEntry 5 }
|
||
|
||
portX25AdminFastSelAccpt OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A flag, if set, that authorizes transmission of
|
||
incoming calls that request the Fast Select
|
||
facility."
|
||
DEFVAL { no }
|
||
::= { portX25AdminEntry 6 }
|
||
|
||
portX25AdminInCallBar OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"An X25 facility that prevents transmission of
|
||
incoming calls to the local DTE."
|
||
DEFVAL { no }
|
||
::= { portX25AdminEntry 7 }
|
||
|
||
portX25AdminOutCallBar OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"An X25 facility that prevents transmission of
|
||
incoming calls to the local DTE."
|
||
DEFVAL { no }
|
||
::= { portX25AdminEntry 8 }
|
||
|
||
portX25AdminMaxPktSize OBJECT-TYPE
|
||
SYNTAX INTEGER (128..4096)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The maximum data packet size that will be allowed to pass
|
||
through this port."
|
||
DEFVAL { 1024 }
|
||
::= { portX25AdminEntry 9 }
|
||
|
||
portX25AdminDefPktSize OBJECT-TYPE
|
||
SYNTAX INTEGER (16..4096)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This is the size that will be assigned to an incoming call
|
||
setup packet if the packet does not request a packet size."
|
||
DEFVAL { 128 }
|
||
::= { portX25AdminEntry 10 }
|
||
|
||
portX25AdminMaxWinSize OBJECT-TYPE
|
||
SYNTAX INTEGER (2..7)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This is the maximum number of unacknowledged packets
|
||
per logical channel that can pass through this port."
|
||
DEFVAL { 7 }
|
||
::= { portX25AdminEntry 11 }
|
||
|
||
portX25AdminDefWinSize OBJECT-TYPE
|
||
SYNTAX INTEGER (1..7)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This size will be assigned to an incoming call
|
||
setup packet if the packet doesn't request a window size."
|
||
DEFVAL { 2 }
|
||
::= { portX25AdminEntry 12 }
|
||
|
||
portX25AdminMaxThruptClass OBJECT-TYPE
|
||
SYNTAX INTEGER (3..13)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This specifies the default throughput class that will be
|
||
inserted into a Call Request packet if Thruput Class
|
||
negotiation is not enabled or if a thruput class is not
|
||
requested in the call request."
|
||
::= { portX25AdminEntry 13 }
|
||
|
||
portX25AdminCUGPref OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This flag, if set, indicates the port belongs to at least
|
||
one CUG."
|
||
DEFVAL { no }
|
||
::= { portX25AdminEntry 14 }
|
||
|
||
portX25AdminCUGIndex OBJECT-TYPE
|
||
SYNTAX INTEGER (1..100)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This number is an index into a Closed User Group table
|
||
which identifies the default Closed User Group for the
|
||
port."
|
||
DEFVAL { 1 }
|
||
::= { portX25AdminEntry 15 }
|
||
|
||
portX25AdminCUGIncAccess OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This flag, when set, indicates whether this port will
|
||
be allowed to receive calls from outside its CUGs."
|
||
DEFVAL { no }
|
||
::= { portX25AdminEntry 16 }
|
||
|
||
portX25AdminCUGOutAccess OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This flag, when set, indicates whether this port will
|
||
be allowed to make calls outside its CUGs."
|
||
DEFVAL { no }
|
||
::= { portX25AdminEntry 17 }
|
||
|
||
portX25OperTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortX25OperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This table contains Netlink Enterprise specific
|
||
objects to manage an X25 port. Changing one of
|
||
these parameters may take effect in the operating
|
||
port immediately or may wait until the interface is
|
||
restarted depending on the details of the
|
||
implementation.
|
||
|
||
The objects in this read-only table
|
||
corresponding read-only objects in the
|
||
portX25OperTable that return the current
|
||
operating value.
|
||
|
||
The operating values may be different from these
|
||
configured values if a configured parameter was
|
||
configured after the interface was started."
|
||
::= { portX25Group 6 }
|
||
|
||
portX25OperEntry OBJECT-TYPE
|
||
SYNTAX PortX25OperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of configured values for an X25 port."
|
||
INDEX { nlIfRlp, nlIfPort }
|
||
::= { portX25OperTable 1 }
|
||
|
||
PortX25OperEntry ::= SEQUENCE {
|
||
portX25OperBlockedFlag INTEGER,
|
||
portX25OperFlowCtrlNeg INTEGER,
|
||
portX25OperThruptClassNeg INTEGER,
|
||
portX25OperLocChgPrev INTEGER,
|
||
portX25OperRevChgAccpt INTEGER,
|
||
portX25OperFastSelAccpt INTEGER,
|
||
portX25OperInCallBar INTEGER,
|
||
portX25OperOutCallBar INTEGER,
|
||
portX25OperMaxPktSize INTEGER,
|
||
portX25OperDefPktSize INTEGER,
|
||
portX25OperMaxWinSize INTEGER,
|
||
portX25OperDefWinSize INTEGER,
|
||
portX25OperMaxThruptClass INTEGER,
|
||
portX25OperCUGPref INTEGER,
|
||
portX25OperCUGIndex INTEGER,
|
||
portX25OperCUGIncAccess INTEGER,
|
||
portX25OperCUGOutAccess INTEGER
|
||
}
|
||
|
||
portX25OperBlockedFlag OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" A flag which when set, means the port should not be
|
||
enabled after a boot-up of the node. "
|
||
::= { portX25OperEntry 1 }
|
||
|
||
portX25OperFlowCtrlNeg OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A flag which if set, permits negotiation of
|
||
the flow control parameters on a per call basis.
|
||
If N is selected, the default packet and window
|
||
sizes will be used. If Y is selected, the packet
|
||
or window size in a call packet (up to the
|
||
configured Max Packet Size or Max Window Size) is
|
||
used."
|
||
::= { portX25OperEntry 2 }
|
||
|
||
portX25OperThruptClassNeg OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A flag which ,if set, permists negotiation of
|
||
the throughput class for either direction of
|
||
data transmission on a per call basis. If N is
|
||
selected, the configured Max Throughput Class
|
||
value is used. If Y, any throughput class in
|
||
a call packet (up to the Max Thruput Class) is
|
||
used."
|
||
::= { portX25OperEntry 3 }
|
||
|
||
portX25OperLocChgPrev OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"If Y is selected, no calls can be charged to
|
||
port. Incoming calls from the network with
|
||
reverse charge specified will be rejected. Outgoing
|
||
calls will insert reverse charge in the call packet
|
||
if not already included."
|
||
::= { portX25OperEntry 4 }
|
||
|
||
portX25OperRevChgAccpt OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A flag, if set, that authorizes transmission of
|
||
incoming calls that request the reverse charge
|
||
facility. If N is selected, and a call requests
|
||
it, it will not be transmitted."
|
||
::= { portX25OperEntry 5 }
|
||
|
||
portX25OperFastSelAccpt OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A flag, if set, that authorizes transmission of
|
||
incoming calls that request the Fast Select
|
||
facility."
|
||
::= { portX25OperEntry 6 }
|
||
|
||
portX25OperInCallBar OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"An X25 facility that prevents transmission of
|
||
incoming calls to the local DTE."
|
||
::= { portX25OperEntry 7 }
|
||
|
||
portX25OperOutCallBar OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"An X25 facility that prevents transmission of
|
||
incoming calls to the local DTE."
|
||
::= { portX25OperEntry 8 }
|
||
|
||
portX25OperMaxPktSize OBJECT-TYPE
|
||
SYNTAX INTEGER (128..4096)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The maximum data packet size that will be allowed to pass
|
||
through this port."
|
||
::= { portX25OperEntry 9 }
|
||
|
||
portX25OperDefPktSize OBJECT-TYPE
|
||
SYNTAX INTEGER (16..4096)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This is the size that will be assigned to an incoming call
|
||
setup packet if the packet does not request a packet size."
|
||
::= { portX25OperEntry 10 }
|
||
|
||
portX25OperMaxWinSize OBJECT-TYPE
|
||
SYNTAX INTEGER (2..7)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This is the maximum number of unacknowledged packets
|
||
per logical channel that can pass through this port."
|
||
::= { portX25OperEntry 11 }
|
||
|
||
portX25OperDefWinSize OBJECT-TYPE
|
||
SYNTAX INTEGER (1..7)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This size will be assigned to an incoming call
|
||
setup packet if the packet doesn't request a window size."
|
||
::= { portX25OperEntry 12 }
|
||
|
||
portX25OperMaxThruptClass OBJECT-TYPE
|
||
SYNTAX INTEGER (3..13)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This specifies the default throughput class that will be
|
||
inserted into a Call Request packet if Thruput Class
|
||
negotiation is not enabled or if a thruput class is not
|
||
requested in the call request."
|
||
::= { portX25OperEntry 13 }
|
||
|
||
portX25OperCUGPref OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This flag, if set, indicates the port belongs to at least
|
||
one CUG."
|
||
::= { portX25OperEntry 14 }
|
||
|
||
portX25OperCUGIndex OBJECT-TYPE
|
||
SYNTAX INTEGER (1..100)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This number is an index into a Closed User Group table
|
||
which identifies the default Closed User Group for the
|
||
port."
|
||
::= { portX25OperEntry 15 }
|
||
|
||
portX25OperCUGIncAccess OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This flag, when set, indicates whether this port will
|
||
be able to receive calls from outside its CUGs."
|
||
::= { portX25OperEntry 16 }
|
||
|
||
portX25OperCUGOutAccess OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This flag, when set, indicates whether this port will
|
||
be able to make calls outside its CUGs."
|
||
::= { portX25OperEntry 17 }
|
||
|
||
portFrGroup OBJECT IDENTIFIER ::= { port 2 }
|
||
|
||
-- The Frame Relay Port Configuration table
|
||
-- contains information on the FR physical port.
|
||
|
||
portFrConfigTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortFrEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of Frame Relay ports . The number of
|
||
entries will be the number of Frame Relay ports on the node."
|
||
::= { portFrGroup 1 }
|
||
|
||
portFrEntry OBJECT-TYPE
|
||
SYNTAX PortFrEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"An Frame Relay Port entry containing objects
|
||
relating to the port that are configurable
|
||
by the user."
|
||
INDEX { portFrRlpIndex , portFrPortIndex }
|
||
::= { portFrConfigTable 1 }
|
||
|
||
PortFrEntry ::=
|
||
SEQUENCE {
|
||
portFrRlpIndex
|
||
INTEGER,
|
||
portFrPortIndex
|
||
INTEGER,
|
||
portFrBlockedFlag
|
||
INTEGER,
|
||
portFrMaxBytesPerFrame
|
||
INTEGER,
|
||
portFrT392Timer
|
||
INTEGER,
|
||
portFrOutgoingRateControl
|
||
INTEGER,
|
||
portFrBandwidthAllocation
|
||
INTEGER,
|
||
portFrConnector
|
||
INTEGER,
|
||
portFrLogicalDCE
|
||
INTEGER,
|
||
portFrGenClock
|
||
INTEGER,
|
||
portFrRcvClkFrmDTE
|
||
INTEGER,
|
||
portFrLLM
|
||
INTEGER,
|
||
portFrRowStatus
|
||
RowStatus,
|
||
portFrSpeed
|
||
INTEGER,
|
||
portFrBackupUseOnly
|
||
INTEGER
|
||
}
|
||
portFrRlpIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The RLP number of the Frame Relay port. It will be in the
|
||
range 1-8."
|
||
::= { portFrEntry 1 }
|
||
portFrPortIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The Port number of the Frame Relay port. It will
|
||
be in the range 1-8 for a physical port. It will be in the range
|
||
9-64 for a Frame Relay logical port."
|
||
::= { portFrEntry 2 }
|
||
|
||
portFrBlockedFlag OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" A flag which when set, means the port should not be
|
||
enabled after a boot-up of the node. "
|
||
DEFVAL { no }
|
||
::= { portFrEntry 3 }
|
||
|
||
portFrMaxBytesPerFrame OBJECT-TYPE
|
||
SYNTAX INTEGER (16..4096)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The maximum number of bytes allowed in an I Frame for this
|
||
Frame Relay port."
|
||
DEFVAL { 1600 }
|
||
::= { portFrEntry 4 }
|
||
|
||
portFrT392Timer OBJECT-TYPE
|
||
SYNTAX INTEGER (5..30)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This timer indicates how long the network will wait between
|
||
Status Enquiry messages before recording an error. It
|
||
should be greater than or equal to the frDlcmiPollingInterval
|
||
variable in the RFC1315 Mib."
|
||
DEFVAL { 15 }
|
||
::= { portFrEntry 5 }
|
||
|
||
portFrOutgoingRateControl OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This is a flag which, when set, enables the enforcement of
|
||
the Outgoing Rate Control parameters."
|
||
DEFVAL { no }
|
||
::= { portFrEntry 6 }
|
||
|
||
portFrBandwidthAllocation OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This is a flag which, when set, enables whether the bandwidth
|
||
allocation will be enforced. "
|
||
DEFVAL { no }
|
||
::= { portFrEntry 7 }
|
||
|
||
portFrConnector OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
rs232 (3),
|
||
v35 (5),
|
||
rs449 (6),
|
||
rs530 (7),
|
||
x21 (8),
|
||
t1 (10),
|
||
e1 (11)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This defines the connector type of the Frame Relay port."
|
||
::= { portFrEntry 8 }
|
||
|
||
portFrLogicalDCE OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This defines the port as logical DCE or DTE."
|
||
DEFVAL { no }
|
||
::= { portFrEntry 9 }
|
||
|
||
portFrGenClock OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This specifies whether the port will generate the clock
|
||
necessary to synchronize traffic over the link."
|
||
DEFVAL { no }
|
||
::= { portFrEntry 10 }
|
||
|
||
portFrRcvClkFrmDTE OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This allows the clock to be looped back from the DTE using
|
||
the TT (Terminal Timing) signal, which can be helpful on
|
||
high-speed lines."
|
||
DEFVAL { no }
|
||
::= { portFrEntry 11 }
|
||
|
||
portFrLLM OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
none(1),
|
||
lmi(2),
|
||
annexd(3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This determines whether, and what type of, configurable
|
||
network management (status enquiries) will be allowed."
|
||
DEFVAL { annexd }
|
||
::= { portFrEntry 12 }
|
||
|
||
portFrRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the portFrConfigTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device, and which is
|
||
supplied by a management station wishing to exercise an
|
||
on-line update of the existing conceptual row. For a
|
||
management protocol set operation, a genErr response is
|
||
returned when the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { portFrEntry 13 }
|
||
|
||
portFrSpeed OBJECT-TYPE
|
||
SYNTAX INTEGER (75..2048000)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the speed of the Frame Relay port. The speed may
|
||
only be set to one of a series of reasonable values, and if an attempt is made
|
||
to set the speed to a value which is within the valid range but not equal to one
|
||
of these values, the speed will be rounded up. If the connector type of the port
|
||
is RS232, the port could be a standard port or a high speed port. If the port is
|
||
a high speed RS232 port, the maximum valid speed is 256000. If the port is a standard
|
||
RS232 port, the maximum valid speed is 64000 on the FRX4000/SS1840 and 19200
|
||
on all other products. It may be possible to set the speed of a standard RS232 port
|
||
to a speed which is valid for a high speed RS232 port but invalid for a standard
|
||
RS232 port. In this case, the port may not end up having the invalid speed. The default
|
||
speed for a standard RS232 port on the FRX6000 is 19200."
|
||
DEFVAL { 64000 }
|
||
::= { portFrEntry 14 }
|
||
|
||
portFrBackupUseOnly OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "This object determines whether all DLCIs on the port will
|
||
be reserved exclusively as backups for other DLCIs in the
|
||
same node. If yes is specified for this object, the port
|
||
will remain disabled until needed for backup."
|
||
DEFVAL { no }
|
||
::= { portFrEntry 15 }
|
||
|
||
-- The Frame Relay DLCI Configuration table
|
||
-- The DLCI contains information about the DCLI configured on a FR
|
||
-- port. Note that deleting of a DLCI entry does not affect the existence
|
||
-- of the DLCI for the running protocol. The DLCI record is removed from
|
||
-- the database file, but will remain known to the node until it is
|
||
-- rebooted. This is consistent with the way DLCI information is handled
|
||
-- when configuring through the user interface menu system.
|
||
|
||
portDLCIConfigTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortDLCIEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of DLCI's on Frame Relay ports . The number of
|
||
entries will be the number of DLCIs on all the Frame Relay
|
||
ports on a node."
|
||
::= { portFrGroup 2 }
|
||
|
||
portDLCIEntry OBJECT-TYPE
|
||
SYNTAX PortDLCIEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"An Frame Relay Port DLCI entry
|
||
relating to the Rate Control Information that is configurable
|
||
by the user."
|
||
INDEX { portDLCIRlpIndex , portDLCIPortIndex, portDLCIIndex }
|
||
::= { portDLCIConfigTable 1 }
|
||
|
||
PortDLCIEntry ::=
|
||
SEQUENCE {
|
||
portDLCIRlpIndex
|
||
INTEGER,
|
||
portDLCIPortIndex
|
||
INTEGER,
|
||
portDLCIIndex
|
||
INTEGER,
|
||
portDLCIIncomingCIR
|
||
INTEGER,
|
||
portDLCIOutgoingCIR
|
||
INTEGER,
|
||
portDLCIIncomingBc
|
||
INTEGER,
|
||
portDLCIOutgoingBc
|
||
INTEGER,
|
||
portDLCIIncomingBe
|
||
INTEGER,
|
||
portDLCIOutgoingBe
|
||
INTEGER,
|
||
portDLCIBecnRecoveryCnt
|
||
INTEGER,
|
||
portDLCIPriority
|
||
INTEGER,
|
||
portDLCIRowStatus
|
||
RowStatus,
|
||
portDLCIBackupGroup
|
||
INTEGER,
|
||
portDLCIBackupProtEnb
|
||
INTEGER
|
||
}
|
||
portDLCIRlpIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The RLP number on which the DLCI is located. The range for
|
||
this is 1-8. "
|
||
::= { portDLCIEntry 1 }
|
||
portDLCIPortIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The port number on which the DLCI is located. The range for
|
||
this is 1-8 for a physical FR port and 9-64 for a logical FR port. "
|
||
::= { portDLCIEntry 2 }
|
||
portDLCIIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The DLCI number used to identify the entry in the table. The
|
||
range is 16-991. "
|
||
::= { portDLCIEntry 3 }
|
||
portDLCIIncomingCIR OBJECT-TYPE
|
||
SYNTAX INTEGER (0..2000)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The committed information rate that is supported on the
|
||
DLCI for incoming data. "
|
||
DEFVAL { 0 }
|
||
::= { portDLCIEntry 4 }
|
||
portDLCIOutgoingCIR OBJECT-TYPE
|
||
SYNTAX INTEGER (0..2000)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The committed information rate that is supported on the
|
||
DLCI for outgoing data. "
|
||
DEFVAL { 0 }
|
||
::= { portDLCIEntry 5 }
|
||
portDLCIIncomingBc OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The committed burst size is the maximum amount of data
|
||
to be transmitted under normal conditions within the time
|
||
period defined by Bc/Cir that is supported on the
|
||
DLCI for incoming data. "
|
||
DEFVAL { 0 }
|
||
::= { portDLCIEntry 6 }
|
||
portDLCIOutgoingBc OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The committed burst size is the maximum amount of data
|
||
to be transmitted under normal conditions within the time
|
||
period defined by Bc/Cir that is supported on the
|
||
DLCI for Outgoing data. "
|
||
DEFVAL { 0 }
|
||
::= { portDLCIEntry 7 }
|
||
portDLCIIncomingBe OBJECT-TYPE
|
||
SYNTAX INTEGER (0..32767)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The excess burst size is the maximum amount of incoming data
|
||
in excess of the committed burst size that the network will try to
|
||
transfer during the time interval determined by Bc/Cir on this
|
||
DLCI. "
|
||
DEFVAL { 0 }
|
||
::= { portDLCIEntry 8 }
|
||
portDLCIOutgoingBe OBJECT-TYPE
|
||
SYNTAX INTEGER (0..32767)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The excess burst size is the maximum amount of incoming data
|
||
in excess of the committed burst size that the network will try to
|
||
transfer during the time interval determined by Bc/Cir on this
|
||
DLCI. "
|
||
DEFVAL { 0 }
|
||
::= { portDLCIEntry 9 }
|
||
portDLCIBecnRecoveryCnt OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" The BECN recovery Count is a method of controlling the rate
|
||
of return to max traffic flow after it has been reduced due to
|
||
congestion. The value determines the number of packets received
|
||
sequentially without BECN set, before increasing the Excess Burst
|
||
Size by 1/8 of it's configured value. "
|
||
DEFVAL { 0 }
|
||
::= { portDLCIEntry 10 }
|
||
|
||
portDLCIPriority OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This field sets the priority of the DLCI among others on the
|
||
physical port. The range is 0 for lowest priority to 4 for
|
||
the highest priority. "
|
||
DEFVAL { 0 }
|
||
::= { portDLCIEntry 11 }
|
||
|
||
portDLCIRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the portDLCIConfigTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned.
|
||
|
||
Also note that deleting a DLCI entry will only remove it from
|
||
the database file, and it's existence will still be known by
|
||
the protocol until the node is rebooted."
|
||
::= { portDLCIEntry 12 }
|
||
|
||
portDLCIBackupGroup OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object specifies (if configured as any number other than
|
||
zero) that this is a primary DLCI, and identifies the backup
|
||
DLCI(s) (in a Frame Relay backup group) that will take over if
|
||
this DLCI fails. This is applicable only on an initiating node,
|
||
which is the node that will initiate the switchover to a backup
|
||
DLCI. At switchover, the initiating node notifies the remote
|
||
node of the change."
|
||
DEFVAL { 0 }
|
||
::= { portDLCIEntry 13 }
|
||
|
||
portDLCIBackupProtEnb OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object specifies whether the DLCI will be used as a
|
||
non-initiating backup DLCI. The DLCI will wait for a backup
|
||
protocol message from the initiating end, telling the backup
|
||
where to send the rest of the messages."
|
||
DEFVAL { no }
|
||
::= { portDLCIEntry 14 }
|
||
|
||
-- The Frame Relay Backup Group Configuration table
|
||
|
||
-- A Frame Relay Backup Group is one or more DLCIs (on the same RLP)
|
||
-- that can act as a backup for one or more "primary" DLCIs (also on
|
||
-- the same RLP). If a node detects a failure in a primary DLCI
|
||
-- connection, the software will search any DLCI in the backup group
|
||
-- configured for the primary DLCI, and will select the first
|
||
-- available one as a backup. The backup will become operational and
|
||
-- will remain in that state until the primary becomes active again.
|
||
-- If the backup fails while in use, the software will check the
|
||
-- status of the primary, then (if necessary) search the primary's
|
||
-- backup group for another backup.
|
||
|
||
portFrBackupGroupTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF FrBackupEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" A Table describes the Frame Relay Backup MIB . "
|
||
::= { portFrGroup 3 }
|
||
|
||
portFrBackupEntry OBJECT-TYPE
|
||
SYNTAX FrBackupEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This Entry contains the SNMP objects that are used for
|
||
configurating the Frame Relay Backup. "
|
||
INDEX { portFrBackupRLP, portFrBackupPort, portFrBackupDLCI, portFrBackupGroup }
|
||
|
||
::= { portFrBackupGroupTable 1 }
|
||
|
||
FrBackupEntry ::=
|
||
SEQUENCE {
|
||
portFrBackupRLP
|
||
INTEGER,
|
||
portFrBackupPort
|
||
INTEGER,
|
||
portFrBackupDLCI
|
||
INTEGER,
|
||
portFrBackupGroup
|
||
INTEGER,
|
||
portFrBackupWaitTimer
|
||
INTEGER,
|
||
portFrBackupProtEnab
|
||
INTEGER,
|
||
portFrBackupRowStatus
|
||
RowStatus
|
||
}
|
||
|
||
portFrBackupRLP OBJECT-TYPE
|
||
SYNTAX INTEGER (1..8)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This RLP number identifies the RLP containing the
|
||
primary and backup DLCIs. "
|
||
::= { portFrBackupEntry 1 }
|
||
|
||
portFrBackupPort OBJECT-TYPE
|
||
SYNTAX INTEGER (1..8)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This Port number is the physical port on which
|
||
the backup DLCI is being configured. "
|
||
::= { portFrBackupEntry 2 }
|
||
|
||
portFrBackupDLCI OBJECT-TYPE
|
||
SYNTAX INTEGER (16..991)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This DLCI number is the backup being configured. "
|
||
::= { portFrBackupEntry 3 }
|
||
|
||
portFrBackupGroup OBJECT-TYPE
|
||
SYNTAX INTEGER (1..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This Group number is the backup being configured. "
|
||
::= { portFrBackupEntry 4 }
|
||
|
||
portFrBackupWaitTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (0..65535)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This is the time after a primary DLCI failure that the
|
||
software will wait for this DLCI to become active before
|
||
checking the next backup DLCI. If the backup does not
|
||
become active before the timer expires, the software will
|
||
search the backup group for the next available backup."
|
||
DEFVAL { 120 }
|
||
::= { portFrBackupEntry 5 }
|
||
|
||
portFrBackupProtEnab OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
" This enables or disables the backup protocol on the specified
|
||
DLCI. It should be set to yes if and only if the remote device
|
||
is an FRX4000 or FRX6000 with the backup protocol enabled on the
|
||
remote DLCI connected to this backup group entry. "
|
||
DEFVAL { no }
|
||
::= { portFrBackupEntry 6 }
|
||
|
||
portFrBackupRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the portFrBackupGroupTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { portFrBackupEntry 7 }
|
||
|
||
portBsciGroup OBJECT IDENTIFIER ::= { port 4 }
|
||
|
||
--
|
||
-- BSC Interactive Port Administrative Table
|
||
--
|
||
|
||
portBsciAdminTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortBsciAdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of BSC Interactive ports . The number of
|
||
entries will be the number of BSC Interactive ports on the node."
|
||
::= { portBsciGroup 1 }
|
||
|
||
portBsciAdminEntry OBJECT-TYPE
|
||
SYNTAX PortBsciAdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A BSCI Interactive Port entry containing objects
|
||
relating to the port that are configurable by the user."
|
||
INDEX { nlIfRlp, nlIfPort }
|
||
::= { portBsciAdminTable 1 }
|
||
|
||
PortBsciAdminEntry ::=
|
||
SEQUENCE {
|
||
portBsciAdminBlockedFlag INTEGER,
|
||
portBsciAdminConnector INTEGER,
|
||
portBsciAdminSpeed INTEGER,
|
||
portBsciAdminRetransmitInterval INTEGER,
|
||
portBsciAdminMAXRetransmits INTEGER,
|
||
portBsciAdminMaxBytesPerFrame INTEGER,
|
||
portBsciAdminGenerateClock INTEGER,
|
||
portBsciAdminRcvClockFromDTE INTEGER,
|
||
portBsciAdminPadType INTEGER,
|
||
portBsciAdminUseEBCDIC INTEGER,
|
||
portBsciAdminCallInfoInRequestPacket INTEGER,
|
||
portBsciAdminClearVCOnLastDeviceDown INTEGER,
|
||
portBsciAdminTransTextSupported INTEGER,
|
||
portBsciAdminEndToEndAck INTEGER,
|
||
portBsciAdminFullDuplex INTEGER,
|
||
portBsciAdminMultidrop INTEGER,
|
||
portBsciAdminSlowPollRetryCount INTEGER,
|
||
portBsciAdminSlowPollRetryFreq INTEGER,
|
||
portBsciAdminStartSynchChars INTEGER,
|
||
portBsciAdminEndPadChars INTEGER,
|
||
portBsciAdminPollInterval INTEGER,
|
||
portBsciAdminNoResponseTimer INTEGER,
|
||
portBsciAdminNoResponseRetryCount INTEGER,
|
||
portBsciAdminErrorRetransmitCount INTEGER,
|
||
portBsciAdminNAKRetryCount INTEGER,
|
||
portBsciAdminBlockCheck INTEGER,
|
||
portBsciAdminDataMode INTEGER,
|
||
portBsciAdminRowStatus RowStatus,
|
||
portBsciAdminAnswerNonConfigured INTEGER,
|
||
portBsciAdminActivateConnectionWithoutPoll INTEGER
|
||
}
|
||
|
||
portBsciAdminBlockedFlag OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled(1),
|
||
enabled(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Causes the port to be enabled or disabled at node IPL."
|
||
DEFVAL { disabled }
|
||
::= { portBsciAdminEntry 1 }
|
||
|
||
portBsciAdminConnector OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
rs232(3),
|
||
v35(5),
|
||
rs449(6),
|
||
rs530(7),
|
||
x21(8),
|
||
t1(10)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Physical port interface connector type."
|
||
::= { portBsciAdminEntry 2 }
|
||
|
||
portBsciAdminSpeed OBJECT-TYPE
|
||
SYNTAX INTEGER (75..19200)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Data transmission rate in bits per second."
|
||
DEFVAL { 9600 }
|
||
::= { portBsciAdminEntry 3 }
|
||
|
||
portBsciAdminRetransmitInterval OBJECT-TYPE
|
||
SYNTAX INTEGER (1..9999)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Length of time before the node will transmit an I-frame
|
||
if the previous transmission is not acknowledged."
|
||
DEFVAL { 2000}
|
||
::= { portBsciAdminEntry 4 }
|
||
|
||
portBsciAdminMAXRetransmits OBJECT-TYPE
|
||
SYNTAX INTEGER (1..99)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Maximum number of times the node will attempt to send
|
||
an I-frame after a retransmission period expiration."
|
||
DEFVAL { 5 }
|
||
::= { portBsciAdminEntry 5 }
|
||
|
||
portBsciAdminMaxBytesPerFrame OBJECT-TYPE
|
||
SYNTAX INTEGER (25..4105)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Maximum frame size that will be transmitted on the port."
|
||
DEFVAL { 4105 }
|
||
::= { portBsciAdminEntry 6 }
|
||
|
||
portBsciAdminGenerateClock OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies whether the port will generate the clock
|
||
necessary to synchronize traffic over the link."
|
||
DEFVAL { yes }
|
||
::= { portBsciAdminEntry 7 }
|
||
|
||
portBsciAdminRcvClockFromDTE OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Allows the clock to be looped back from the DTE
|
||
using the TT (Terminal Timing) signal."
|
||
DEFVAL { no }
|
||
::= { portBsciAdminEntry 8 }
|
||
|
||
portBsciAdminPadType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
tpad(1),
|
||
hpad(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "BSCI Pad Type"
|
||
DEFVAL { tpad }
|
||
::= { portBsciAdminEntry 9 }
|
||
|
||
portBsciAdminUseEBCDIC OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies whether all devices on a line use the same
|
||
character set for successive session polls."
|
||
DEFVAL { yes }
|
||
::= { portBsciAdminEntry 10 }
|
||
|
||
portBsciAdminCallInfoInRequestPacket OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies whether the user will have the option of
|
||
including call information in a call request packet."
|
||
DEFVAL { yes }
|
||
::= { portBsciAdminEntry 11 }
|
||
|
||
portBsciAdminClearVCOnLastDeviceDown OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Causes the virtual circuit to be cleared when no
|
||
terminals are using it."
|
||
DEFVAL { no }
|
||
::= { portBsciAdminEntry 12 }
|
||
|
||
portBsciAdminTransTextSupported OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Causes all characters transmitted to be treated as data."
|
||
DEFVAL { no }
|
||
::= { portBsciAdminEntry 13 }
|
||
|
||
portBsciAdminEndToEndAck OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Allows management of acknowledgments end to end across
|
||
the network rather than locally at each end."
|
||
DEFVAL { no }
|
||
::= { portBsciAdminEntry 14 }
|
||
|
||
portBsciAdminFullDuplex OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies full-duplex transmission."
|
||
DEFVAL { yes }
|
||
::= { portBsciAdminEntry 15 }
|
||
|
||
portBsciAdminMultidrop OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies whether transmission will be multidrop."
|
||
DEFVAL { no }
|
||
::= { portBsciAdminEntry 16 }
|
||
|
||
portBsciAdminSlowPollRetryCount OBJECT-TYPE
|
||
SYNTAX INTEGER (10..150)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies how many times the control unit will be polled
|
||
before it is put on the slow poll list."
|
||
DEFVAL { 20 }
|
||
::= { portBsciAdminEntry 17 }
|
||
|
||
portBsciAdminSlowPollRetryFreq OBJECT-TYPE
|
||
SYNTAX INTEGER (1..200)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies the number of times active control units will
|
||
be polled between pollings on the slow poll list."
|
||
DEFVAL { 20 }
|
||
::= { portBsciAdminEntry 18 }
|
||
|
||
portBsciAdminStartSynchChars OBJECT-TYPE
|
||
SYNTAX INTEGER (2..10)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies the number of synchronization characters
|
||
that will be added to the beginning of each frame."
|
||
DEFVAL { 2 }
|
||
::= { portBsciAdminEntry 19 }
|
||
|
||
portBsciAdminEndPadChars OBJECT-TYPE
|
||
SYNTAX INTEGER (1..10)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies the number of padding characters that will
|
||
be added to the end of each frame."
|
||
DEFVAL { 1 }
|
||
::= { portBsciAdminEntry 20 }
|
||
|
||
portBsciAdminPollInterval OBJECT-TYPE
|
||
SYNTAX INTEGER (100..1000)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies the time between passes through the polling list."
|
||
DEFVAL { 500 }
|
||
::= { portBsciAdminEntry 21 }
|
||
|
||
portBsciAdminNoResponseTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (2..10)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Activated after transmission of a general poll or a
|
||
data frame."
|
||
DEFVAL { 2 }
|
||
::= { portBsciAdminEntry 22 }
|
||
|
||
portBsciAdminNoResponseRetryCount OBJECT-TYPE
|
||
SYNTAX INTEGER (1..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies how many times the user device will be polled
|
||
before control is passed on the next cluster."
|
||
DEFVAL { 5 }
|
||
::= { portBsciAdminEntry 23 }
|
||
|
||
portBsciAdminErrorRetransmitCount OBJECT-TYPE
|
||
SYNTAX INTEGER (1..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies the number of times the Netlink device will
|
||
resend a block of data after the receiving device has
|
||
detected an error in that block."
|
||
DEFVAL { 5 }
|
||
::= { portBsciAdminEntry 24 }
|
||
|
||
portBsciAdminNAKRetryCount OBJECT-TYPE
|
||
SYNTAX INTEGER (1..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies the number of times the Netlink device will
|
||
send a frame when the receiving device is unable to
|
||
acknowledge."
|
||
DEFVAL { 5 }
|
||
::= { portBsciAdminEntry 25 }
|
||
|
||
portBsciAdminBlockCheck OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
crc16(1),
|
||
even-lrc(2),
|
||
odd-lrc(3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Sets the redundancy check parameter."
|
||
DEFVAL { even-lrc }
|
||
::= { portBsciAdminEntry 26 }
|
||
|
||
portBsciAdminDataMode OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
odd-7bit(1),
|
||
even-7bit(2),
|
||
none-8bit(3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Sets the parity parameter."
|
||
DEFVAL { none-8bit }
|
||
::= { portBsciAdminEntry 27 }
|
||
|
||
portBsciAdminRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the portBsciAdminTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device, and which is
|
||
supplied by a management station wishing to exercise an
|
||
on-line update of the existing conceptual row. For a
|
||
management protocol set operation, a genErr response is
|
||
returned when the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { portBsciAdminEntry 28 }
|
||
|
||
portBsciAdminAnswerNonConfigured OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Only valid if pad type is HPAD. If yes, the HPAD will
|
||
respond to all devices on the line. If no, the HPAD will
|
||
respond only to those devices that are configured on the
|
||
node."
|
||
DEFVAL { yes }
|
||
::= { portBsciAdminEntry 29 }
|
||
|
||
portBsciAdminActivateConnectionWithoutPoll OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Only valid if pad type is TPAD. If yes, will active the
|
||
TPAD connection without a poll of the connected device."
|
||
DEFVAL { no }
|
||
::= { portBsciAdminEntry 30 }
|
||
|
||
--
|
||
-- BSC Interactive Port Operational Table
|
||
--
|
||
|
||
portBsciOperTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortBsciOperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of BSC Interactive ports . The number of
|
||
entries will be the number of BSC Interactive ports on the node."
|
||
::= { portBsciGroup 2 }
|
||
|
||
portBsciOperEntry OBJECT-TYPE
|
||
SYNTAX PortBsciOperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A BSCI Interactive Port entry containing objects
|
||
relating to the port that are configurable by the user."
|
||
INDEX { nlIfRlp, nlIfPort }
|
||
::= { portBsciOperTable 1 }
|
||
|
||
PortBsciOperEntry ::=
|
||
SEQUENCE {
|
||
portBsciOperBlockedFlag INTEGER,
|
||
portBsciOperConnector INTEGER,
|
||
portBsciOperSpeed INTEGER,
|
||
portBsciOperRetransmitInterval INTEGER,
|
||
portBsciOperMAXRetransmits INTEGER,
|
||
portBsciOperMaxBytesPerFrame INTEGER,
|
||
portBsciOperGenerateClock INTEGER,
|
||
portBsciOperRcvClockFromDTE INTEGER,
|
||
portBsciOperPadType INTEGER,
|
||
portBsciOperUseEBCDIC INTEGER,
|
||
portBsciOperCallInfoInRequestPacket INTEGER,
|
||
portBsciOperClearVCOnLastDeviceDown INTEGER,
|
||
portBsciOperTransTextSupported INTEGER,
|
||
portBsciOperEndToEndAck INTEGER,
|
||
portBsciOperFullDuplex INTEGER,
|
||
portBsciOperMultidrop INTEGER,
|
||
portBsciOperSlowPollRetryCount INTEGER,
|
||
portBsciOperSlowPollRetryFreq INTEGER,
|
||
portBsciOperStartSynchChars INTEGER,
|
||
portBsciOperEndPadChars INTEGER,
|
||
portBsciOperPollInterval INTEGER,
|
||
portBsciOperNoResponseTimer INTEGER,
|
||
portBsciOperNoResponseRetryCount INTEGER,
|
||
portBsciOperErrorRetransmitCount INTEGER,
|
||
portBsciOperNAKRetryCount INTEGER,
|
||
portBsciOperBlockCheck INTEGER,
|
||
portBsciOperDataMode INTEGER,
|
||
portBsciOperAnswerNonConfigured INTEGER,
|
||
portBsciOperActivateConnectionWithoutPoll INTEGER
|
||
}
|
||
|
||
portBsciOperBlockedFlag OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled(1),
|
||
enabled(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Causes the port to be enabled or disabled at node IPL."
|
||
::= { portBsciOperEntry 1 }
|
||
|
||
portBsciOperConnector OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
rs232(3),
|
||
v35(5),
|
||
rs449(6),
|
||
rs530(7),
|
||
x21(8),
|
||
t1(10)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Physical port interface connector type."
|
||
::= { portBsciOperEntry 2 }
|
||
|
||
portBsciOperSpeed OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Data transmission rate in bits per second."
|
||
::= { portBsciOperEntry 3 }
|
||
|
||
portBsciOperRetransmitInterval OBJECT-TYPE
|
||
SYNTAX INTEGER (1..9999)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Length of time before the node will transmit an I-frame
|
||
if the previous transmission is not acknowledged."
|
||
::= { portBsciOperEntry 4 }
|
||
|
||
portBsciOperMAXRetransmits OBJECT-TYPE
|
||
SYNTAX INTEGER (1..99)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Maximum number of times the node will attempt to send
|
||
an I-frame after a retransmission period expiration."
|
||
::= { portBsciOperEntry 5 }
|
||
|
||
portBsciOperMaxBytesPerFrame OBJECT-TYPE
|
||
SYNTAX INTEGER (25..4105)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Maximum frame size that will be transmitted on the port."
|
||
::= { portBsciOperEntry 6 }
|
||
|
||
portBsciOperGenerateClock OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies whether the port will generate the clock
|
||
necessary to synchronize traffic over the link."
|
||
::= { portBsciOperEntry 7 }
|
||
|
||
portBsciOperRcvClockFromDTE OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Allows the clock to be looped back from the DTE
|
||
using the TT (Terminal Timing) signal."
|
||
::= { portBsciOperEntry 8 }
|
||
|
||
portBsciOperPadType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
tpad(1),
|
||
hpad(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "BSCI Pad Type"
|
||
::= { portBsciOperEntry 9 }
|
||
|
||
portBsciOperUseEBCDIC OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies whether all devices on a line use the same
|
||
character set for successive session polls."
|
||
::= { portBsciOperEntry 10 }
|
||
|
||
portBsciOperCallInfoInRequestPacket OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies whether the user will have the option of
|
||
including call information in a call request packet."
|
||
::= { portBsciOperEntry 11 }
|
||
|
||
portBsciOperClearVCOnLastDeviceDown OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Causes the virtual circuit to be cleared when no
|
||
terminals are using it."
|
||
::= { portBsciOperEntry 12 }
|
||
|
||
portBsciOperTransTextSupported OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Causes all characters transmitted to be treated as data."
|
||
::= { portBsciOperEntry 13 }
|
||
|
||
portBsciOperEndToEndAck OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Allows management of acknowledgments end to end across
|
||
the network rather than locally at each end."
|
||
::= { portBsciOperEntry 14 }
|
||
|
||
portBsciOperFullDuplex OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies full-duplex transmission."
|
||
::= { portBsciOperEntry 15 }
|
||
|
||
portBsciOperMultidrop OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies whether transmission will be multidrop."
|
||
::= { portBsciOperEntry 16 }
|
||
|
||
portBsciOperSlowPollRetryCount OBJECT-TYPE
|
||
SYNTAX INTEGER (10..150)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies how many times the control unit will be polled
|
||
before it is put on the slow poll list."
|
||
::= { portBsciOperEntry 17 }
|
||
|
||
portBsciOperSlowPollRetryFreq OBJECT-TYPE
|
||
SYNTAX INTEGER (1..200)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies the number of times active control units will
|
||
be polled between pollings on the slow poll list."
|
||
::= { portBsciOperEntry 18 }
|
||
|
||
portBsciOperStartSynchChars OBJECT-TYPE
|
||
SYNTAX INTEGER (2..10)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies the number of synchronization characters
|
||
that will be added to the beginning of each frame."
|
||
::= { portBsciOperEntry 19 }
|
||
|
||
portBsciOperEndPadChars OBJECT-TYPE
|
||
SYNTAX INTEGER (1..10)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies the number of padding characters that will
|
||
be added to the end of each frame."
|
||
::= { portBsciOperEntry 20 }
|
||
|
||
portBsciOperPollInterval OBJECT-TYPE
|
||
SYNTAX INTEGER (100..1000)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies the time between passes through the polling list."
|
||
::= { portBsciOperEntry 21 }
|
||
|
||
portBsciOperNoResponseTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (2..10)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Activated after transmission of a general poll or a
|
||
data frame."
|
||
::= { portBsciOperEntry 22 }
|
||
|
||
portBsciOperNoResponseRetryCount OBJECT-TYPE
|
||
SYNTAX INTEGER (1..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies how many times the user device will be polled
|
||
before control is passed on the next cluster."
|
||
::= { portBsciOperEntry 23 }
|
||
|
||
portBsciOperErrorRetransmitCount OBJECT-TYPE
|
||
SYNTAX INTEGER (1..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies the number of times the Netlink device will
|
||
resend a block of data after the receiving device has
|
||
detected an error in that block."
|
||
::= { portBsciOperEntry 24 }
|
||
|
||
portBsciOperNAKRetryCount OBJECT-TYPE
|
||
SYNTAX INTEGER (1..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies the number of times the Netlink device will
|
||
send a frame when the receiving device is unable to
|
||
acknowledge."
|
||
::= { portBsciOperEntry 25 }
|
||
|
||
portBsciOperBlockCheck OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
crc16(1),
|
||
even-lrc(2),
|
||
odd-lrc(3)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Sets the redundancy check parameter."
|
||
::= { portBsciOperEntry 26 }
|
||
|
||
portBsciOperDataMode OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
odd-7bit(1),
|
||
even-7bit(2),
|
||
none-8bit(3)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Sets the parity parameter."
|
||
::= { portBsciOperEntry 27 }
|
||
|
||
portBsciOperAnswerNonConfigured OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Only valid if pad type is HPAD. If yes, the HPAD will
|
||
respond to all devices on the line. If no, the HPAD will
|
||
respond only to those devices that are configured on the
|
||
node."
|
||
::= { portBsciOperEntry 28 }
|
||
|
||
portBsciOperActivateConnectionWithoutPoll OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Only valid if pad type is TPAD. If yes, will active the
|
||
TPAD connection without a poll of the connected device."
|
||
::= { portBsciOperEntry 29 }
|
||
|
||
--
|
||
-- BSCI Port Subscriber Administrative Table
|
||
--
|
||
|
||
bsciSubscrAdminTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF BsciSubscrAdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of BSC Interactive port subscribers."
|
||
::= { portBsciGroup 3 }
|
||
|
||
bsciSubscrAdminEntry OBJECT-TYPE
|
||
SYNTAX BsciSubscrAdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A BSCI Interactive Port Subscriber entry containing objects
|
||
relating to the port that are configurable by the user."
|
||
INDEX { nlIfRlp, nlIfPort, bsciSubscrAdminSequence }
|
||
::= { bsciSubscrAdminTable 1 }
|
||
|
||
BsciSubscrAdminEntry ::=
|
||
SEQUENCE {
|
||
bsciSubscrAdminSequence INTEGER,
|
||
bsciSubscrAdminLocalID NlSubscriberAddress,
|
||
bsciSubscrAdminRemoteID NlSubscriberAddress,
|
||
bsciSubscrAdminAutocall INTEGER,
|
||
bsciSubscrAdminAutocallRtyTimer INTEGER,
|
||
bsciSubscrAdminAutocallMaxRtry INTEGER,
|
||
bsciSubscrAdminConnectionID INTEGER,
|
||
bsciSubscrAdminRowStatus RowStatus
|
||
}
|
||
|
||
bsciSubscrAdminSequence OBJECT-TYPE
|
||
SYNTAX INTEGER (1..16)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Subscriber index for a specific BSCI port subscriber."
|
||
::= { bsciSubscrAdminEntry 1 }
|
||
|
||
bsciSubscrAdminLocalID OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Subscriber address of the local end of a BSCI connection."
|
||
::= { bsciSubscrAdminEntry 2 }
|
||
|
||
bsciSubscrAdminRemoteID OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Subscriber address of the remote end of a BSCI connection."
|
||
::= { bsciSubscrAdminEntry 3 }
|
||
|
||
bsciSubscrAdminAutocall OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Causes a BSCI TPAD to automatically call its HPAD when
|
||
the controller becomes active."
|
||
DEFVAL { no }
|
||
::= { bsciSubscrAdminEntry 4 }
|
||
|
||
bsciSubscrAdminAutocallRtyTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (15..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Time between autocall retries."
|
||
DEFVAL { 60 }
|
||
::= { bsciSubscrAdminEntry 5 }
|
||
|
||
bsciSubscrAdminAutocallMaxRtry OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Maximum number of times an autocall will be sent."
|
||
DEFVAL { 0 }
|
||
::= { bsciSubscrAdminEntry 6 }
|
||
|
||
bsciSubscrAdminConnectionID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Identifier that will link the BSCI port with a device
|
||
configured in the BSCI Devices Table."
|
||
DEFVAL { 0 }
|
||
::= { bsciSubscrAdminEntry 7 }
|
||
|
||
bsciSubscrAdminRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the bsciDevAdminTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { bsciSubscrAdminEntry 8 }
|
||
|
||
--
|
||
-- BSCI Port Subscriber Operational Table
|
||
--
|
||
|
||
bsciSubscrOperTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF BsciSubscrOperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of BSC Interactive port subscribers."
|
||
::= { portBsciGroup 4 }
|
||
|
||
bsciSubscrOperEntry OBJECT-TYPE
|
||
SYNTAX BsciSubscrOperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A BSCI Interactive Port Subscriber entry containing objects
|
||
relating to the port that are configurable by the user."
|
||
INDEX { nlIfRlp, nlIfPort, bsciSubscrOperSequence }
|
||
::= { bsciSubscrOperTable 1 }
|
||
|
||
BsciSubscrOperEntry ::=
|
||
SEQUENCE {
|
||
bsciSubscrOperSequence INTEGER,
|
||
bsciSubscrOperLocalID NlSubscriberAddress,
|
||
bsciSubscrOperRemoteID NlSubscriberAddress,
|
||
bsciSubscrOperAutocall INTEGER,
|
||
bsciSubscrOperAutocallRtyTimer INTEGER,
|
||
bsciSubscrOperAutocallMaxRtry INTEGER,
|
||
bsciSubscrOperConnectionID INTEGER
|
||
}
|
||
|
||
bsciSubscrOperSequence OBJECT-TYPE
|
||
SYNTAX INTEGER (1..16)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Subscriber index for a specific BSCI port subscriber."
|
||
::= { bsciSubscrOperEntry 1 }
|
||
|
||
bsciSubscrOperLocalID OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Subscriber address of the local end of a BSCI connection."
|
||
::= { bsciSubscrOperEntry 2 }
|
||
|
||
bsciSubscrOperRemoteID OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Subscriber address of the remote end of a BSCI connection."
|
||
::= { bsciSubscrOperEntry 3 }
|
||
|
||
bsciSubscrOperAutocall OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Causes a BSCI TPAD to automatically call its HPAD when
|
||
the controller becomes active."
|
||
::= { bsciSubscrOperEntry 4 }
|
||
|
||
bsciSubscrOperAutocallRtyTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (15..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Time between autocall retries."
|
||
::= { bsciSubscrOperEntry 5 }
|
||
|
||
bsciSubscrOperAutocallMaxRtry OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Maximum number of times an autocall will be sent."
|
||
::= { bsciSubscrOperEntry 6 }
|
||
|
||
bsciSubscrOperConnectionID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Identifier that will link the BSCI port with a device
|
||
configured in the BSCI Devices Table."
|
||
::= { bsciSubscrOperEntry 7 }
|
||
|
||
--
|
||
-- BSC Interactive Device Administrative Table
|
||
--
|
||
|
||
bsciDevAdminTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF BsciDevAdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of BSC Interactive devices."
|
||
::= { portBsciGroup 5 }
|
||
|
||
bsciDevAdminEntry OBJECT-TYPE
|
||
SYNTAX BsciDevAdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A BSCI Interactive Device entry containing objects
|
||
relating to the device that are configurable by the user."
|
||
INDEX { nlIfRlp, nlIfPort, bsciDevAdminControlUnitID,
|
||
bsciDevAdminDeviceUnitID }
|
||
::= { bsciDevAdminTable 1 }
|
||
|
||
BsciDevAdminEntry ::=
|
||
SEQUENCE {
|
||
bsciDevAdminControlUnitID INTEGER,
|
||
bsciDevAdminDeviceUnitID INTEGER,
|
||
bsciDevAdminConnectionID INTEGER,
|
||
bsciDevAdminSingleUserVC INTEGER,
|
||
bsciDevAdminTransTextSupported INTEGER,
|
||
bsciDevAdminPrinterAttached INTEGER,
|
||
bsciDevAdminRowStatus RowStatus,
|
||
bsciDevAdminDisableStatusRequest INTEGER
|
||
}
|
||
|
||
bsciDevAdminControlUnitID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..31)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Control Unit identifier."
|
||
::= { bsciDevAdminEntry 1 }
|
||
|
||
bsciDevAdminDeviceUnitID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..31)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Device Unit identifier."
|
||
::= { bsciDevAdminEntry 2 }
|
||
|
||
bsciDevAdminConnectionID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The BSCI port connection ID for the device."
|
||
DEFVAL { 0 }
|
||
::= { bsciDevAdminEntry 3 }
|
||
|
||
bsciDevAdminSingleUserVC OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies whether each end of the connection is within
|
||
a same Control Unit/Device Type pair."
|
||
DEFVAL { no }
|
||
::= { bsciDevAdminEntry 4 }
|
||
|
||
bsciDevAdminTransTextSupported OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Causes all characters transmitted to be treated as data."
|
||
DEFVAL { no }
|
||
::= { bsciDevAdminEntry 5 }
|
||
|
||
bsciDevAdminPrinterAttached OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies whether the device has a printer attached."
|
||
DEFVAL { no }
|
||
::= { bsciDevAdminEntry 6 }
|
||
|
||
bsciDevAdminRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the bsciDevAdminTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { bsciDevAdminEntry 7 }
|
||
|
||
bsciDevAdminDisableStatusRequest OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
normal (1),
|
||
none (2),
|
||
always-active (3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Determines how the BSCI port will report the status
|
||
of the attached device. Normal status- the port will
|
||
report what the device reports. No status- the port will
|
||
report status only if the device is active. Always active
|
||
status- the port will always report the device as active."
|
||
DEFVAL { normal }
|
||
::= { bsciDevAdminEntry 8 }
|
||
|
||
--
|
||
-- BSC Interactive Device Operational Table
|
||
--
|
||
|
||
bsciDevOperTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF BsciDevOperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of BSC Interactive devices."
|
||
::= { portBsciGroup 6 }
|
||
|
||
bsciDevOperEntry OBJECT-TYPE
|
||
SYNTAX BsciDevOperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A BSCI Interactive Device entry containing objects
|
||
relating to the device that are configurable by the user."
|
||
INDEX { nlIfRlp, nlIfPort, bsciDevOperControlUnitID,
|
||
bsciDevOperDeviceUnitID }
|
||
::= { bsciDevOperTable 1 }
|
||
|
||
BsciDevOperEntry ::=
|
||
SEQUENCE {
|
||
bsciDevOperControlUnitID INTEGER,
|
||
bsciDevOperDeviceUnitID INTEGER,
|
||
bsciDevOperConnectionID INTEGER,
|
||
bsciDevOperSingleUserVC INTEGER,
|
||
bsciDevOperTransTextSupported INTEGER,
|
||
bsciDevOperPrinterAttached INTEGER,
|
||
bsciDevOperDisableStatusRequest INTEGER
|
||
}
|
||
|
||
bsciDevOperControlUnitID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..31)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Control Unit identifier."
|
||
::= { bsciDevOperEntry 1 }
|
||
|
||
bsciDevOperDeviceUnitID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..31)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Device Unit identifier."
|
||
::= { bsciDevOperEntry 2 }
|
||
|
||
bsciDevOperConnectionID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The BSCI port connection ID for the device."
|
||
::= { bsciDevOperEntry 3 }
|
||
|
||
bsciDevOperSingleUserVC OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies whether each end of the connection is within
|
||
a same Control Unit/Device Type pair."
|
||
::= { bsciDevOperEntry 4 }
|
||
|
||
bsciDevOperTransTextSupported OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Causes all characters transmitted to be treated as data."
|
||
::= { bsciDevOperEntry 5 }
|
||
|
||
bsciDevOperPrinterAttached OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies whether the device has a printer attached."
|
||
::= { bsciDevOperEntry 6 }
|
||
|
||
bsciDevOperDisableStatusRequest OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
normal (1),
|
||
none (2),
|
||
always-active (3)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Determines how the BSCI port will report the status
|
||
of the attached device. Normal status- the port will
|
||
report what the device reports. No status- the port will
|
||
report status only if the device is active. Always active
|
||
status- the port will always report the device as active."
|
||
::= { bsciDevOperEntry 7 }
|
||
|
||
portSdlcGroup OBJECT IDENTIFIER ::= { port 5 }
|
||
|
||
portSdlcAdminTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortSdlcAdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This table contains Netlink Enterprise specific
|
||
objects to manage SDLC port. Changing on of the
|
||
these parameters may take effect in the operating
|
||
port immediately or may wait until the interface is restarted depending on the details of the
|
||
implementation.
|
||
|
||
Most of the objects in this read-write table have
|
||
corresponding read-only objects in the
|
||
portSdlcOperTable that return the current
|
||
operating value.
|
||
|
||
The operating values may be different from these
|
||
configured values if a configured parameter was
|
||
configured afterthe interface was started."
|
||
::= { portSdlcGroup 1 }
|
||
|
||
portSdlcAdminEntry OBJECT-TYPE
|
||
SYNTAX PortSdlcAdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of configured values for an SDLC port."
|
||
INDEX { nlIfRlp, nlIfPort }
|
||
::= { portSdlcAdminTable 1 }
|
||
|
||
PortSdlcAdminEntry ::= SEQUENCE
|
||
{
|
||
portSdlcAdminCommit INTEGER,
|
||
portSdlcAdminMAXRetries INTEGER,
|
||
portSdlcAdminMAXOut INTEGER,
|
||
portSdlcAdminPadType INTEGER,
|
||
portSdlcAdminGenerateClock INTEGER,
|
||
portSdlcAdminRcvClockFromDTE INTEGER,
|
||
portSdlcAdminNrz INTEGER,
|
||
portSdlcAdminPacketSize INTEGER,
|
||
portSdlcAdminDisableRequestDisconnect INTEGER,
|
||
portSdlcAdminLPDASupport INTEGER,
|
||
portSdlcAdminConnector INTEGER,
|
||
portSdlcAdminSpeed INTEGER,
|
||
portSdlcAdminRowStatus RowStatus,
|
||
portSdlcAdminIdleFillChar INTEGER,
|
||
portSdlcAdminInactivityTimer INTEGER,
|
||
portSdlcAdminL1Duplex INTEGER
|
||
}
|
||
|
||
portSdlcAdminCommit OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS obsolete
|
||
DESCRIPTION
|
||
"Writing a value to this object commits the
|
||
the SDLC port related modified configuration
|
||
values to the database."
|
||
DEFVAL { 0 }
|
||
::= { portSdlcAdminEntry 1 }
|
||
|
||
portSdlcAdminMAXRetries OBJECT-TYPE
|
||
SYNTAX INTEGER (0..99)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the max. number of retries
|
||
to a non-responding Link station, before putting
|
||
the Link station to slow-poll list if it is not
|
||
Normal response Mode OR disconnecting the link
|
||
station if it is data txfr state."
|
||
|
||
DEFVAL { 5 }
|
||
::= { portSdlcAdminEntry 2 }
|
||
|
||
portSdlcAdminMAXOut OBJECT-TYPE
|
||
SYNTAX INTEGER (1..7)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the number of outstanding
|
||
frames for triggering window full condition."
|
||
|
||
DEFVAL { 7 }
|
||
::= { portSdlcAdminEntry 3 }
|
||
|
||
portSdlcAdminPadType OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
xpad (1),
|
||
tpad (2),
|
||
hpad (3),
|
||
npad (4)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the SNA
|
||
PAD types."
|
||
DEFVAL { tpad }
|
||
::= { portSdlcAdminEntry 4 }
|
||
|
||
portSdlcAdminGenerateClock OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines if the port would
|
||
generate clock."
|
||
|
||
DEFVAL { yes }
|
||
::= { portSdlcAdminEntry 5 }
|
||
|
||
portSdlcAdminRcvClockFromDTE OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines if the rcv clock will
|
||
be used from DTE."
|
||
|
||
DEFVAL { no }
|
||
::= { portSdlcAdminEntry 6 }
|
||
|
||
portSdlcAdminNrz OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the data encoding
|
||
at the physical layer"
|
||
|
||
DEFVAL { yes }
|
||
::= { portSdlcAdminEntry 7 }
|
||
|
||
portSdlcAdminPacketSize OBJECT-TYPE
|
||
SYNTAX INTEGER (16..4096)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the packet size of the
|
||
X25 layer used by SNA PAD"
|
||
|
||
DEFVAL { 1024 }
|
||
::= { portSdlcAdminEntry 8 }
|
||
|
||
portSdlcAdminDisableRequestDisconnect OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines if a Request To
|
||
Disconnect(RD) will be sent when remote
|
||
PAD clear the connection"
|
||
|
||
DEFVAL { no }
|
||
::= { portSdlcAdminEntry 9 }
|
||
|
||
portSdlcAdminLPDASupport OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
none (1),
|
||
lpda-1 (2),
|
||
lpda-2 (3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the type LPDA support
|
||
on SDLC port."
|
||
|
||
DEFVAL { none }
|
||
::= { portSdlcAdminEntry 10 }
|
||
|
||
portSdlcAdminConnector OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
rs232 (3),
|
||
v35 (5),
|
||
rs449 (6),
|
||
rs530 (7),
|
||
x21 (8),
|
||
t1 (10)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the connector type
|
||
of the SDLC port."
|
||
|
||
::= { portSdlcAdminEntry 11 }
|
||
|
||
portSdlcAdminSpeed OBJECT-TYPE
|
||
SYNTAX INTEGER (75..2048000)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the speed of the SDLC port. The speed may
|
||
only be set to one of a series of reasonable values, and if an attempt is made
|
||
to set the speed to a value which is within the valid range but not equal to one
|
||
of these values, the speed will be rounded up. If the connector type of the port
|
||
is RS232, the port could be a standard port or a high speed port. If the port is
|
||
a high speed RS232 port, the maximum valid speed is 256000. If the port is a standard
|
||
RS232 port, the maximum valid speed is 64000 on the FRX4000/SS1840 and 19200
|
||
on all other products. It may be possible to set the speed of a standard RS232 port
|
||
to a speed which is valid for a high speed RS232 port but invalid for a standard
|
||
RS232 port. In this case, the port may not end up having the invalid speed. The default
|
||
speed for a standard RS232 port on the FRX6000 is 19200."
|
||
DEFVAL { 64000 }
|
||
::= { portSdlcAdminEntry 12 }
|
||
|
||
portSdlcAdminRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the portSdlcAdminTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device, and which is
|
||
supplied by a management station wishing to exercise an
|
||
on-line update of the existing conceptual row. For a
|
||
management protocol set operation, a genErr response is
|
||
returned when the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
|
||
::= { portSdlcAdminEntry 13 }
|
||
|
||
portSdlcAdminIdleFillChar OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
hex-ff (1),
|
||
hex-7e (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object specifies a character that
|
||
wll be inserted into the stream when the
|
||
SNA link is idle."
|
||
DEFVAL { hex-ff }
|
||
::= { portSdlcAdminEntry 14 }
|
||
|
||
portSdlcAdminInactivityTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (15..250)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object determines how long the node
|
||
will wait with no activity on the port
|
||
before it will declare the attached device
|
||
down."
|
||
DEFVAL { 50 }
|
||
::= { portSdlcAdminEntry 15 }
|
||
|
||
portSdlcAdminL1Duplex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
full-duplex (1),
|
||
half-duplex (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object determines whether level-1
|
||
(physical layer) transmission can be in
|
||
one (half duplex) or both (full duplex)
|
||
directions at once."
|
||
DEFVAL { full-duplex }
|
||
::= { portSdlcAdminEntry 16 }
|
||
|
||
portSdlcOperTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortSdlcOperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This table contains current Netlink enterprise specific
|
||
port parameters"
|
||
|
||
::= { portSdlcGroup 2 }
|
||
|
||
portSdlcOperEntry OBJECT-TYPE
|
||
SYNTAX PortSdlcOperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of operational values for an SDLC port."
|
||
|
||
INDEX { nlIfRlp, nlIfPort }
|
||
::= { portSdlcOperTable 1 }
|
||
|
||
PortSdlcOperEntry ::= SEQUENCE
|
||
{
|
||
portSdlcOperCommit INTEGER,
|
||
portSdlcOperMAXRetries INTEGER,
|
||
portSdlcOperMAXOut INTEGER,
|
||
portSdlcOperPadType INTEGER,
|
||
portSdlcOperGenerateClock INTEGER,
|
||
portSdlcOperRcvClockFromDTE INTEGER,
|
||
portSdlcOperNrz INTEGER,
|
||
portSdlcOperPacketSize INTEGER,
|
||
portSdlcOperDisableRequestDisconnect INTEGER,
|
||
portSdlcOperLPDASupport INTEGER,
|
||
portSdlcOperConnector INTEGER,
|
||
portSdlcOperSpeed INTEGER,
|
||
portSdlcOperIdleFillChar INTEGER,
|
||
portSdlcOperInactivityTimer INTEGER,
|
||
portSdlcOperL1Duplex INTEGER
|
||
}
|
||
|
||
portSdlcOperCommit OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS obsolete
|
||
DESCRIPTION
|
||
"This object is not used."
|
||
::= { portSdlcOperEntry 1 }
|
||
|
||
portSdlcOperMAXRetries OBJECT-TYPE
|
||
SYNTAX INTEGER (0..99)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the max. number of retries
|
||
to a non-responding Link station, before putting
|
||
the Link station to slow-poll list if it is not
|
||
Normal response Mode OR disconnecting the link
|
||
station if it is data txfr state."
|
||
::= { portSdlcOperEntry 2 }
|
||
|
||
portSdlcOperMAXOut OBJECT-TYPE
|
||
SYNTAX INTEGER (1..7)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the number of outstanding
|
||
frames for triggering window full condition."
|
||
|
||
::= { portSdlcOperEntry 3 }
|
||
|
||
portSdlcOperPadType OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
xpad (1),
|
||
tpad (2),
|
||
hpad (3),
|
||
npad (4)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the SNA
|
||
PAD type"
|
||
|
||
::= { portSdlcOperEntry 4 }
|
||
|
||
portSdlcOperGenerateClock OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines if the port would
|
||
generate clock."
|
||
::= { portSdlcOperEntry 5 }
|
||
|
||
portSdlcOperRcvClockFromDTE OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines if the rcv clock will
|
||
be used from DTE."
|
||
::= { portSdlcOperEntry 6 }
|
||
|
||
portSdlcOperNrz OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the data encoding
|
||
at the physical layer"
|
||
::= { portSdlcOperEntry 7 }
|
||
|
||
portSdlcOperPacketSize OBJECT-TYPE
|
||
SYNTAX INTEGER (16..4096)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the packet size of the
|
||
X25 layer used by SNA PAD"
|
||
|
||
::= { portSdlcOperEntry 8 }
|
||
|
||
portSdlcOperDisableRequestDisconnect OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines if a Request To
|
||
Disconnect(RD) will be sent when remote
|
||
PAD clear the connection"
|
||
::= { portSdlcOperEntry 9 }
|
||
|
||
portSdlcOperLPDASupport OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
none (1),
|
||
lpda-1 (2),
|
||
lpda-2 (3)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the type LPDA support
|
||
on SDLC port."
|
||
::= { portSdlcOperEntry 10 }
|
||
|
||
portSdlcOperConnector OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
rs232 (3),
|
||
v35 (5),
|
||
rs449 (6),
|
||
rs530 (7),
|
||
x21 (8),
|
||
t1 (10)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the operational
|
||
connector type of the SDLC port."
|
||
|
||
::= { portSdlcOperEntry 11 }
|
||
|
||
portSdlcOperSpeed OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the operational speed
|
||
of the SDLC port."
|
||
|
||
::= { portSdlcOperEntry 12 }
|
||
|
||
portSdlcOperIdleFillChar OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
hex-ff (1),
|
||
hex-7e (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object specifies a character that
|
||
wll be inserted into the stream when the
|
||
SNA link is idle."
|
||
::= { portSdlcOperEntry 13 }
|
||
|
||
portSdlcOperInactivityTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (15..250)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object determines how long the node
|
||
will wait with no activity on the port
|
||
before it will declare the attached device
|
||
down."
|
||
::= { portSdlcOperEntry 14 }
|
||
|
||
portSdlcOperL1Duplex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
full-duplex (1),
|
||
half-duplex (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object determines whether level-1
|
||
(physical layer) transmission can be in
|
||
one (half duplex) or both (full duplex)
|
||
directions at once."
|
||
::= { portSdlcOperEntry 15 }
|
||
|
||
-- The lSSdlcAdminTable contains information about the PUs configured on
|
||
-- an SDLC port. Note that deleting of a PU entry does not affect the
|
||
-- existence of the PU for the running protocol. The PU record is removed
|
||
-- from the database file, but will remain known to the node until it is
|
||
-- rebooted or until an online update of the port is performed. This is
|
||
-- consistent with the way PU information is handled when configuring
|
||
-- through the user interface menu system.
|
||
|
||
lSSdlcAdminTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF LSSdlcAdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This table contains Enterprise specific Link station
|
||
configurable parameters to manage the link stations."
|
||
|
||
::= { portSdlcGroup 3 }
|
||
|
||
lSSdlcAdminEntry OBJECT-TYPE
|
||
SYNTAX LSSdlcAdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of configured values for an SDLC port."
|
||
|
||
INDEX { nlIfRlp, nlIfPort, sdlcLSAddress }
|
||
::= { lSSdlcAdminTable 1 }
|
||
|
||
LSSdlcAdminEntry ::= SEQUENCE
|
||
{
|
||
lSSdlcAdminLocalSub NlSubscriberAddress,
|
||
lSSdlcAdminRemoteSub NlSubscriberAddress,
|
||
lSSdlcAdminAutoCall INTEGER,
|
||
lSSdlcAdminRetryTime INTEGER,
|
||
lSSdlcAdminRetryCount INTEGER,
|
||
lSSdlcAdminLlc2Conversion INTEGER,
|
||
lSSdlcAdminLPDAResourceID INTEGER,
|
||
lSSdlcAdminRowStatus RowStatus,
|
||
lSSdlcAdminL2DatMode INTEGER
|
||
}
|
||
|
||
lSSdlcAdminLocalSub OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the local subscriber ID
|
||
of the Link Station"
|
||
|
||
::= { lSSdlcAdminEntry 1 }
|
||
|
||
lSSdlcAdminRemoteSub OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the remote subscriber ID
|
||
used to connect to remote Link Station"
|
||
::= { lSSdlcAdminEntry 2 }
|
||
|
||
lSSdlcAdminAutoCall OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines if auto call is enabled for
|
||
the link station. If enabled, the link station
|
||
will initiate connection establishment, when
|
||
appropriate. Else, it will passively listen to
|
||
the connection request for establish a connection
|
||
with the remote PAD"
|
||
|
||
DEFVAL { no }
|
||
::= { lSSdlcAdminEntry 3 }
|
||
|
||
lSSdlcAdminRetryTime OBJECT-TYPE
|
||
SYNTAX INTEGER (15..225)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object is used, only when
|
||
lSSdlcAdminAutoCall object is yes. This defines
|
||
the time interval measured in seconds in which
|
||
the connection request is retried"
|
||
|
||
DEFVAL { 60 }
|
||
::= { lSSdlcAdminEntry 4 }
|
||
|
||
lSSdlcAdminRetryCount OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object is used, only when
|
||
lSSdlcAdminAutoCall object is yes. This defines
|
||
the number of times the connection initiation
|
||
is retried before given up. The value of Zero(0)
|
||
means to try indefinitely"
|
||
|
||
DEFVAL { 0 }
|
||
::= { lSSdlcAdminEntry 5 }
|
||
|
||
lSSdlcAdminLlc2Conversion OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines if this link station
|
||
connects to a LLC2 device/host."
|
||
|
||
DEFVAL { no }
|
||
::= { lSSdlcAdminEntry 6 }
|
||
|
||
lSSdlcAdminLPDAResourceID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This objects the resource ID used during
|
||
LPDA command support"
|
||
|
||
DEFVAL { 0 }
|
||
::= { lSSdlcAdminEntry 7 }
|
||
|
||
lSSdlcAdminRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the lSSdlcAdminTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned.
|
||
|
||
Also note that deleting a PU entry will only remove it from
|
||
the database file, and it's existence will still be known by
|
||
the protocol until the node is rebooted or until an online
|
||
update of the port is performed."
|
||
|
||
::= { lSSdlcAdminEntry 8 }
|
||
|
||
lSSdlcAdminL2DatMode OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
two-way-alternate (1),
|
||
two-way-simultaneous (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object determines whether transmission
|
||
can be in one (alternate) or two (simultaneous)
|
||
directions at the same time."
|
||
DEFVAL { two-way-alternate }
|
||
::= { lSSdlcAdminEntry 9 }
|
||
|
||
lSSdlcOperTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF LSSdlcOperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This table contains the operational parameters of the
|
||
SDLC port"
|
||
::= { portSdlcGroup 4 }
|
||
|
||
lSSdlcOperEntry OBJECT-TYPE
|
||
SYNTAX LSSdlcOperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of configured values for an SDLC port."
|
||
INDEX { nlIfRlp, nlIfPort, sdlcLSAddress }
|
||
::= { lSSdlcOperTable 1 }
|
||
|
||
LSSdlcOperEntry ::= SEQUENCE
|
||
{
|
||
lSSdlcOperLocalSub NlSubscriberAddress,
|
||
lSSdlcOperRemoteSub NlSubscriberAddress,
|
||
lSSdlcOperAutoCall INTEGER,
|
||
lSSdlcOperRetryTime INTEGER,
|
||
lSSdlcOperRetryCount INTEGER,
|
||
lSSdlcOperLlc2Conversion INTEGER,
|
||
lSSdlcOperLPDAResourceID INTEGER,
|
||
lSSdlcOperL2DatMode INTEGER
|
||
}
|
||
|
||
lSSdlcOperLocalSub OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the local subscriber ID
|
||
of the Link Station"
|
||
::= { lSSdlcOperEntry 1 }
|
||
|
||
lSSdlcOperRemoteSub OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the remote subscriber ID
|
||
used to connect to remote Link Station"
|
||
::= { lSSdlcOperEntry 2 }
|
||
|
||
lSSdlcOperAutoCall OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines if auto call is enabled for
|
||
the link station. If enabled, the link station
|
||
will initiate connection establishment, when
|
||
appropriate. Else, it will passively listen to
|
||
the connection request for establish a connection
|
||
with the remote PAD"
|
||
::= { lSSdlcOperEntry 3 }
|
||
|
||
lSSdlcOperRetryTime OBJECT-TYPE
|
||
SYNTAX INTEGER (15..225)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object is valid, only when
|
||
lSSdlcAdminAutoCall object is yes. This defines
|
||
the time interval measured in seconds in which
|
||
the connection request is retried"
|
||
::= { lSSdlcOperEntry 4 }
|
||
|
||
lSSdlcOperRetryCount OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object is used, only when
|
||
lSSdlcAdminAutoCall object is yes. This defines
|
||
the number of times the connection initiation
|
||
is retried before given up. The value of Zero(0)
|
||
means to try indefinitely"
|
||
::= { lSSdlcOperEntry 5 }
|
||
|
||
lSSdlcOperLlc2Conversion OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines if this link station
|
||
connects to a LLC2 device/host."
|
||
::= { lSSdlcOperEntry 6 }
|
||
|
||
lSSdlcOperLPDAResourceID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This objects the resource ID used during
|
||
LPDA command support"
|
||
::= { lSSdlcOperEntry 7 }
|
||
|
||
lSSdlcOperL2DatMode OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
two-way-alternate (1),
|
||
two-way-simultaneous (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object determines whether transmission
|
||
can be in one (alternate) or two (simultaneous)
|
||
directions at the same time."
|
||
::= { lSSdlcOperEntry 8 }
|
||
|
||
lSSdlcLlc2AdminTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF LSSdlcLlc2AdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This table contains the LLC2 related parameters
|
||
used to configure LLC2 session, when the SDLC
|
||
station is connected to a LLC2 device at the remote
|
||
end"
|
||
::= { portSdlcGroup 5 }
|
||
|
||
lSSdlcLlc2AdminEntry OBJECT-TYPE
|
||
SYNTAX LSSdlcLlc2AdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of configured values for an SDLC port."
|
||
INDEX { nlIfRlp, nlIfPort, sdlcLSAddress }
|
||
::= { lSSdlcLlc2AdminTable 1 }
|
||
|
||
-- The lSSdlcLlc2AdminTable contains information about the PUs configured
|
||
-- on an SDLC port. Note that deleting of a PU entry does not affect the
|
||
-- existence of the PU for the running protocol. The PU record is removed
|
||
-- from the database file, but will remain known to the node until it is
|
||
-- rebooted or until an online update of the port is performed. This is
|
||
-- consistent with the way PU information is handled when configuring
|
||
-- through the user interface menu system.
|
||
|
||
LSSdlcLlc2AdminEntry ::= SEQUENCE
|
||
{
|
||
lSSdlcLlc2AdminLocalSap INTEGER,
|
||
lSSdlcLlc2AdminLocalMac PhysAddress,
|
||
lSSdlcLlc2AdminIdblk INTEGER,
|
||
lSSdlcLlc2AdminIdnum INTEGER,
|
||
lSSdlcLlc2AdminLanTi INTEGER,
|
||
lSSdlcLlc2AdminLanT1 INTEGER,
|
||
lSSdlcLlc2AdminLanT2 INTEGER,
|
||
lSSdlcLlc2AdminLanN2 INTEGER,
|
||
lSSdlcLlc2AdminLanN3 INTEGER,
|
||
lSSdlcLlc2AdminLanTw INTEGER,
|
||
lSSdlcLlc2AdminBAG INTEGER,
|
||
lSSdlcLlc2AdminPriority INTEGER,
|
||
lSSdlcLlc2AdminRowStatus RowStatus,
|
||
lSSdlcLlc2AdminSuppressXID INTEGER
|
||
}
|
||
|
||
lSSdlcLlc2AdminLocalSap OBJECT-TYPE
|
||
SYNTAX INTEGER (0..252)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines Local SAP
|
||
address (multiple of 4)"
|
||
DEFVAL { 4 }
|
||
::= { lSSdlcLlc2AdminEntry 1 }
|
||
|
||
lSSdlcLlc2AdminLocalMac OBJECT-TYPE
|
||
SYNTAX PhysAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the local MAC address"
|
||
DEFVAL { '000000000000'H } -- 00:00:00:00:00:00
|
||
::= { lSSdlcLlc2AdminEntry 2 }
|
||
|
||
lSSdlcLlc2AdminIdblk OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4095)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines idblk used in XID"
|
||
DEFVAL { 0 }
|
||
::= { lSSdlcLlc2AdminEntry 3 }
|
||
|
||
lSSdlcLlc2AdminIdnum OBJECT-TYPE
|
||
SYNTAX INTEGER (0..1048575)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines idnum used in XID"
|
||
DEFVAL { 0 }
|
||
::= { lSSdlcLlc2AdminEntry 4 }
|
||
|
||
lSSdlcLlc2AdminLanTi OBJECT-TYPE
|
||
SYNTAX INTEGER (1..50)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines LLC2 inactivity timer
|
||
measured in units of seconds"
|
||
DEFVAL { 30 }
|
||
::= { lSSdlcLlc2AdminEntry 5 }
|
||
|
||
lSSdlcLlc2AdminLanT1 OBJECT-TYPE
|
||
SYNTAX INTEGER (1..250)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines LLC2 reply timer
|
||
measured in units of 100 milliseconds"
|
||
DEFVAL { 10 }
|
||
::= { lSSdlcLlc2AdminEntry 6 }
|
||
|
||
lSSdlcLlc2AdminLanT2 OBJECT-TYPE
|
||
SYNTAX INTEGER (100..5000)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines Receiver Ack Timer
|
||
measured in units of milliseconds"
|
||
DEFVAL { 100 }
|
||
::= { lSSdlcLlc2AdminEntry 7 }
|
||
|
||
lSSdlcLlc2AdminLanN2 OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines Maximum Retransmissions"
|
||
DEFVAL { 8 }
|
||
::= { lSSdlcLlc2AdminEntry 8 }
|
||
|
||
lSSdlcLlc2AdminLanN3 OBJECT-TYPE
|
||
SYNTAX INTEGER (1..127)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines count of I-format LPDU's
|
||
before sending Ack"
|
||
|
||
DEFVAL { 3 }
|
||
::= { lSSdlcLlc2AdminEntry 9 }
|
||
|
||
lSSdlcLlc2AdminLanTw OBJECT-TYPE
|
||
SYNTAX INTEGER (1..127)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines Outstanding Frames"
|
||
DEFVAL { 7 }
|
||
::= { lSSdlcLlc2AdminEntry 10 }
|
||
|
||
lSSdlcLlc2AdminBAG OBJECT-TYPE
|
||
SYNTAX INTEGER (0..16)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines bandwidth allocation
|
||
group"
|
||
DEFVAL { 0 }
|
||
::= { lSSdlcLlc2AdminEntry 11 }
|
||
|
||
lSSdlcLlc2AdminPriority OBJECT-TYPE
|
||
SYNTAX INTEGER (0..9)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines priority for traffic
|
||
within the node"
|
||
DEFVAL { 0 }
|
||
::= { lSSdlcLlc2AdminEntry 12 }
|
||
|
||
lSSdlcLlc2AdminRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the lSSdlcLlc2AdminTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned.
|
||
|
||
Also note that deleting a PU entry will only remove it from
|
||
the database file, and it's existence will still be known by
|
||
the protocol until the node is rebooted or until an online
|
||
update of the port is performed."
|
||
::= { lSSdlcLlc2AdminEntry 13 }
|
||
|
||
lSSdlcLlc2AdminSuppressXID OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object prevents (if yes) the returning
|
||
of an XID in response to a null XID. This
|
||
might be desirable if the remote TPAD is not
|
||
running PU 2.1. It should be noted that even
|
||
if an XID is sent, an SNRM (Set Normal
|
||
Response Mode) immediately follows, so the
|
||
connection will be established."
|
||
DEFVAL { no }
|
||
::= { lSSdlcLlc2AdminEntry 14 }
|
||
|
||
lSSdlcLlc2OperTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF LSSdlcLlc2OperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This table contains operartional parameters related
|
||
to LLC2 session of this link station."
|
||
::= { portSdlcGroup 6 }
|
||
|
||
lSSdlcLlc2OperEntry OBJECT-TYPE
|
||
SYNTAX LSSdlcLlc2OperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of configured values for an SDLC port."
|
||
INDEX { nlIfRlp, nlIfPort, sdlcLSAddress }
|
||
::= { lSSdlcLlc2OperTable 1 }
|
||
|
||
LSSdlcLlc2OperEntry ::= SEQUENCE
|
||
{
|
||
lSSdlcLlc2OperLocalSap INTEGER,
|
||
lSSdlcLlc2OperLocalMac PhysAddress,
|
||
lSSdlcLlc2OperIdblk INTEGER,
|
||
lSSdlcLlc2OperIdnum INTEGER,
|
||
lSSdlcLlc2OperLanTi INTEGER,
|
||
lSSdlcLlc2OperLanT1 INTEGER,
|
||
lSSdlcLlc2OperLanT2 INTEGER,
|
||
lSSdlcLlc2OperLanN2 INTEGER,
|
||
lSSdlcLlc2OperLanN3 INTEGER,
|
||
lSSdlcLlc2OperLanTw INTEGER,
|
||
lSSdlcLlc2OperBAG INTEGER,
|
||
lSSdlcLlc2OperPriority INTEGER,
|
||
lSSdlcLlc2OperSuppressXID INTEGER
|
||
}
|
||
|
||
lSSdlcLlc2OperLocalSap OBJECT-TYPE
|
||
SYNTAX INTEGER (0..252)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines Local SAP
|
||
address (multiple of 4)"
|
||
::= { lSSdlcLlc2OperEntry 1 }
|
||
|
||
lSSdlcLlc2OperLocalMac OBJECT-TYPE
|
||
SYNTAX PhysAddress
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines the local MAC address"
|
||
::= { lSSdlcLlc2OperEntry 2 }
|
||
|
||
lSSdlcLlc2OperIdblk OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4095)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines idblk used in XID"
|
||
::= { lSSdlcLlc2OperEntry 3 }
|
||
|
||
lSSdlcLlc2OperIdnum OBJECT-TYPE
|
||
SYNTAX INTEGER (0..1048575)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines idnum used in XID"
|
||
::= { lSSdlcLlc2OperEntry 4 }
|
||
|
||
lSSdlcLlc2OperLanTi OBJECT-TYPE
|
||
SYNTAX INTEGER (1..50)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines LLC2 inactivity timer
|
||
measured in units of seconds"
|
||
::= { lSSdlcLlc2OperEntry 5 }
|
||
|
||
lSSdlcLlc2OperLanT1 OBJECT-TYPE
|
||
SYNTAX INTEGER (1..250)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines LLC2 reply timer
|
||
measured in units of 100 milliseconds"
|
||
::= { lSSdlcLlc2OperEntry 6 }
|
||
|
||
lSSdlcLlc2OperLanT2 OBJECT-TYPE
|
||
SYNTAX INTEGER (100..5000)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines Receiver Ack Timer
|
||
measured in units of milliseconds"
|
||
::= { lSSdlcLlc2OperEntry 7 }
|
||
|
||
lSSdlcLlc2OperLanN2 OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines Maximum Retransmissions"
|
||
::= { lSSdlcLlc2OperEntry 8 }
|
||
|
||
lSSdlcLlc2OperLanN3 OBJECT-TYPE
|
||
SYNTAX INTEGER (1..127)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines count of I-format LPDU's
|
||
before sending Ack"
|
||
::= { lSSdlcLlc2OperEntry 9 }
|
||
|
||
lSSdlcLlc2OperLanTw OBJECT-TYPE
|
||
SYNTAX INTEGER (1..127)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines Outstanding Frames"
|
||
::= { lSSdlcLlc2OperEntry 10 }
|
||
|
||
lSSdlcLlc2OperBAG OBJECT-TYPE
|
||
SYNTAX INTEGER (0..16)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines bandwidth allocation
|
||
group"
|
||
::= { lSSdlcLlc2OperEntry 11 }
|
||
|
||
lSSdlcLlc2OperPriority OBJECT-TYPE
|
||
SYNTAX INTEGER (0..9)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object defines priority for traffic
|
||
within the node"
|
||
::= { lSSdlcLlc2OperEntry 12 }
|
||
|
||
lSSdlcLlc2OperSuppressXID OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This object prevents (if yes) the returning
|
||
of an XID in response to a null XID. This
|
||
might be desirable if the remote TPAD is not
|
||
running PU 2.1. It should be noted that even
|
||
if an XID is sent, an SNRM (Set Normal
|
||
Response Mode) immediately follows, so the
|
||
connection will be established."
|
||
::= { lSSdlcLlc2OperEntry 13 }
|
||
|
||
portT1Group OBJECT IDENTIFIER ::= { port 7 }
|
||
|
||
portT1AdminTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortT1AdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "The configuration information pertaining to a T1 port.
|
||
T1 ports can operate at full T1 bandwidth or DS0A channelized which provides
|
||
24 separate channels."
|
||
::= { portT1Group 1 }
|
||
|
||
portT1AdminEntry OBJECT-TYPE
|
||
SYNTAX PortT1AdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A T1 port entry containing objects relating to T1 ports."
|
||
INDEX { nlIfRlp, nlIfPort }
|
||
::= { portT1AdminTable 1 }
|
||
|
||
PortT1AdminEntry ::=
|
||
SEQUENCE {
|
||
portT1AdminBlockedPortFlag INTEGER,
|
||
portT1AdminGenerateClock INTEGER,
|
||
portT1AdminFramingMode INTEGER,
|
||
portT1AdminFrameModelSelect INTEGER,
|
||
portT1AdminLineEncoding INTEGER,
|
||
portT1AdminLineBuildOut INTEGER,
|
||
portT1AdminRowStatus RowStatus,
|
||
portT1AdminProtocolFraming INTEGER,
|
||
portT1AdminNRZI INTEGER
|
||
}
|
||
|
||
portT1AdminBlockedPortFlag OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
::= { portT1AdminEntry 1 }
|
||
|
||
portT1AdminGenerateClock OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
::= { portT1AdminEntry 2 }
|
||
|
||
portT1AdminFramingMode OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
fullT1(1),
|
||
ds0aT1(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies how this T1 port is to function. ds0AT1 specifies a
|
||
24 channelized T1."
|
||
::= { portT1AdminEntry 3 }
|
||
|
||
portT1AdminFrameModelSelect OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
d4(1),
|
||
esf(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
::= { portT1AdminEntry 4 }
|
||
|
||
portT1AdminLineEncoding OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
b8zs(1),
|
||
ami(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
::= { portT1AdminEntry 5 }
|
||
|
||
portT1AdminLineBuildOut OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
zerodb(1),
|
||
x133-266ft(2),
|
||
x266-399ft(3),
|
||
x399-533ft(4),
|
||
x533-655ft(5),
|
||
minus7p5db(6),
|
||
minus15db(7),
|
||
minus22p5db(8)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
::= { portT1AdminEntry 6 }
|
||
|
||
portT1AdminRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
::= { portT1AdminEntry 7 }
|
||
|
||
portT1AdminProtocolFraming OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
sync(1),
|
||
bisync(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
::= { portT1AdminEntry 8 }
|
||
|
||
portT1AdminNRZI OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
::= { portT1AdminEntry 9 }
|
||
|
||
portT1OperTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortT1OperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "The configuration information pertaining to a T1 port.
|
||
T1 ports can operate at full T1 bandwidth or DS0A channelized which provides
|
||
24 separate channels."
|
||
::= { portT1Group 2 }
|
||
|
||
portT1OperEntry OBJECT-TYPE
|
||
SYNTAX PortT1OperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A T1 port entry containing objects relating to T1 ports."
|
||
INDEX { nlIfRlp, nlIfPort }
|
||
::= { portT1OperTable 1 }
|
||
|
||
PortT1OperEntry ::=
|
||
SEQUENCE {
|
||
portT1OperBlockedPortFlag INTEGER,
|
||
portT1OperGenerateClock INTEGER,
|
||
portT1OperFramingMode INTEGER,
|
||
portT1OperFrameModelSelect INTEGER,
|
||
portT1OperLineEncoding INTEGER,
|
||
portT1OperLineBuildOut INTEGER,
|
||
portT1OperProtocolFraming INTEGER,
|
||
portT1OperNRZI INTEGER
|
||
}
|
||
|
||
portT1OperBlockedPortFlag OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
::= { portT1OperEntry 1 }
|
||
|
||
portT1OperGenerateClock OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
::= { portT1OperEntry 2 }
|
||
|
||
portT1OperFramingMode OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
fullT1(1),
|
||
ds0aT1(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies how this T1 port is to function. ds0AT1 specifies a
|
||
24 channelized T1."
|
||
::= { portT1OperEntry 3 }
|
||
|
||
portT1OperFrameModelSelect OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
d4(1),
|
||
esf(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
::= { portT1OperEntry 4 }
|
||
|
||
portT1OperLineEncoding OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
b8zs(1),
|
||
ami(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
::= { portT1OperEntry 5 }
|
||
|
||
portT1OperLineBuildOut OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
zerodb(1),
|
||
x133-266ft(2),
|
||
x266-399ft(3),
|
||
x399-533ft(4),
|
||
x533-655ft(5),
|
||
minus7p5db(6),
|
||
minus15db(7),
|
||
minus22p5db(8)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
::= { portT1OperEntry 6 }
|
||
|
||
portT1OperProtocolFraming OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
sync(1),
|
||
bisync(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
::= { portT1OperEntry 7 }
|
||
|
||
portT1OperNRZI OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
::= { portT1OperEntry 8 }
|
||
|
||
portVoiceGroup OBJECT IDENTIFIER ::= { port 8 }
|
||
|
||
--
|
||
-- The Voice Port Administrative table
|
||
--
|
||
|
||
portVoiceAdminTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortVoiceAdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of Voice ports. The number of entries
|
||
will be the number of Voice ports on the node."
|
||
::= { portVoiceGroup 1 }
|
||
|
||
portVoiceAdminEntry OBJECT-TYPE
|
||
SYNTAX PortVoiceAdminEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A Voice Port entry containing objects relating
|
||
to the port that are configurable by the user."
|
||
INDEX { portVoiceAdminRlpIndex, portVoiceAdminPortIndex }
|
||
::= { portVoiceAdminTable 1 }
|
||
|
||
PortVoiceAdminEntry ::=
|
||
SEQUENCE {
|
||
portVoiceAdminRlpIndex
|
||
INTEGER,
|
||
portVoiceAdminPortIndex
|
||
INTEGER,
|
||
portVoiceAdminBlockedFlag
|
||
INTEGER,
|
||
portVoiceAdminSpeed
|
||
INTEGER,
|
||
portVoiceAdminDTMF
|
||
INTEGER,
|
||
portVoiceAdminInterface
|
||
INTEGER,
|
||
portVoiceAdminTETimer
|
||
INTEGER,
|
||
portVoiceAdminLevelIn
|
||
INTEGER,
|
||
portVoiceAdminLevelOut
|
||
INTEGER,
|
||
portVoiceAdminCallTimer
|
||
INTEGER,
|
||
portVoiceAdminHuntGroup
|
||
INTEGER,
|
||
portVoiceAdminLongDialPrefix
|
||
OCTET STRING,
|
||
portVoiceAdminSLTTimeout
|
||
INTEGER,
|
||
portVoiceAdminLinkDownBusy
|
||
INTEGER,
|
||
portVoiceAdminFaxSupported
|
||
INTEGER,
|
||
portVoiceAdminTelephonyType
|
||
INTEGER,
|
||
portVoiceAdminJitter
|
||
INTEGER,
|
||
portVoiceAdminSampleDelay
|
||
INTEGER,
|
||
portVoiceAdminDialTimer
|
||
INTEGER,
|
||
portVoiceAdminAutoDial
|
||
INTEGER,
|
||
portVoiceAdminSuppression
|
||
INTEGER,
|
||
portVoiceAdminAutoDialNumber
|
||
OCTET STRING,
|
||
portVoiceAdminAutoPoll
|
||
INTEGER,
|
||
portVoiceAdminAutoPollTimer
|
||
INTEGER,
|
||
portVoiceAdminExtDigitsSource
|
||
INTEGER,
|
||
portVoiceAdminNumDigitsDelete
|
||
INTEGER,
|
||
portVoiceAdminForwardDelay
|
||
INTEGER,
|
||
portVoiceAdminForwardedType
|
||
INTEGER,
|
||
portVoiceAdminForwardedDigits
|
||
INTEGER,
|
||
portVoiceAdminMakeRatio
|
||
INTEGER,
|
||
portVoiceAdminBreakRatio
|
||
INTEGER,
|
||
portVoiceAdminDTMFOnDuration
|
||
INTEGER,
|
||
portVoiceAdminDTMFOffDuration
|
||
INTEGER,
|
||
portVoiceAdminToneType
|
||
INTEGER,
|
||
portVoiceAdminRowStatus
|
||
RowStatus
|
||
}
|
||
|
||
portVoiceAdminRlpIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The RLP number of the Voice port."
|
||
::= { portVoiceAdminEntry 1 }
|
||
|
||
portVoiceAdminPortIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The Port number of the Voice port."
|
||
::= { portVoiceAdminEntry 2 }
|
||
|
||
portVoiceAdminBlockedFlag OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled (1),
|
||
enabled (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The flag which causes the port to be enabled or disabled
|
||
at node IPL. The port will remain in that state until this
|
||
flag is changed and the node is rebooted, or until an on-
|
||
line enable or disable is performed."
|
||
DEFVAL { disabled }
|
||
::= { portVoiceAdminEntry 3 }
|
||
|
||
portVoiceAdminSpeed OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
bps-4800 (1),
|
||
bps-8000 (2),
|
||
bps-32000 (3),
|
||
bps-64000 (4)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The speed of the port which is transmitted as part
|
||
of a Call Setup frame. A Voice call will be established
|
||
if there is enough bandwidth at each end to provide the
|
||
minimum configured rate."
|
||
DEFVAL { bps-8000 }
|
||
::= { portVoiceAdminEntry 4 }
|
||
|
||
portVoiceAdminDTMF OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The flag to enable, disable, or specify a time span
|
||
over which DTMF (Dual Tone Multi Frequency) tones will
|
||
be regenerated.
|
||
0 = pass tones transparently to the remote device.
|
||
1 = detect incoming tones and regenerate as received.
|
||
2-255 = regenerate tones for the specified seconds."
|
||
DEFVAL { 1 }
|
||
::= { portVoiceAdminEntry 5 }
|
||
|
||
portVoiceAdminInterface OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
em-4w (1),
|
||
em-2w (2),
|
||
loop-start (3),
|
||
ac15-a (4),
|
||
ac15-b (6),
|
||
em-4w-te (10),
|
||
em-2w-te (11)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The type of interface (in conjunction with the Telephony
|
||
Interface Type) that will be used by the Voice channel.
|
||
This requires rebooting for the change to take effect.
|
||
Telephony Type Interface Type
|
||
-------------- --------------
|
||
OPX (FXO) Loop Start
|
||
SLT (FXS) Loop Start
|
||
E&M 4W E&M, 4W E&M TE, 2W E&M, 2W E&M TE
|
||
AC15 AC15A, AC15C"
|
||
DEFVAL { loop-start }
|
||
::= { portVoiceAdminEntry 6 }
|
||
|
||
portVoiceAdminTETimer OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The delay at which the E&M 'E' lead follows the 'M' lead."
|
||
DEFVAL { 3 }
|
||
::= { portVoiceAdminEntry 7 }
|
||
|
||
portVoiceAdminLevelIn OBJECT-TYPE
|
||
SYNTAX INTEGER (-22..7)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The local voice level into the voice port. This adjusts
|
||
the sensitivity of the local voice channel to the signal
|
||
from the attached device. The purpose of this is to match
|
||
the voice channel dB level to the input signal. A more
|
||
negative setting produces a higher input gain. If the level
|
||
is reduced, the voice channel will be more sensitive to the
|
||
input. This will also cause the voice output at the remote
|
||
device to sound louder."
|
||
DEFVAL { 0 }
|
||
::= { portVoiceAdminEntry 8 }
|
||
|
||
portVoiceAdminLevelOut OBJECT-TYPE
|
||
SYNTAX INTEGER (-22..7)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The local voice level out of the voice port. A more
|
||
positive setting produces a higher volume."
|
||
DEFVAL { -4 }
|
||
::= { portVoiceAdminEntry 9 }
|
||
|
||
portVoiceAdminCallTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (1..30)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The amount of time the node will wait for a response to a
|
||
Call Connect or Call Clear request. When the node issues a
|
||
request, it will set a timer to the value configured here.
|
||
If that timer expires with no response from the destination,
|
||
the node will generate a busy tone."
|
||
DEFVAL { 5 }
|
||
::= { portVoiceAdminEntry 10 }
|
||
|
||
portVoiceAdminHuntGroup OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
none (1),
|
||
a (2),
|
||
b (3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The hunt group that includes the voice channel."
|
||
DEFVAL { none }
|
||
::= { portVoiceAdminEntry 11 }
|
||
|
||
portVoiceAdminLongDialPrefix OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (1))
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The character that will be required preceeding calls using
|
||
the long call format. When the user at an attached device
|
||
dials a long form number, it must be preceeded by the prefix
|
||
character specified here."
|
||
DEFVAL { '2A'H }
|
||
::= { portVoiceAdminEntry 12 }
|
||
|
||
portVoiceAdminSLTTimeout OBJECT-TYPE
|
||
SYNTAX INTEGER (1..99)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The time the local port will wait before an actual fax
|
||
transmission begins. If there is no fax tone when this
|
||
timer expires, the connection will be terminated."
|
||
DEFVAL { 30 }
|
||
::= { portVoiceAdminEntry 13 }
|
||
|
||
portVoiceAdminLinkDownBusy OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled (1),
|
||
enabled (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This flag enables or disables automatic busy-out of
|
||
channels when the link is down. When enabled, the system
|
||
will automatically busy-out channels when the composite
|
||
link is down. When disabled, channels remain on-hook when
|
||
the link is down. If your application is connected to a
|
||
PBX that can route calls to another alternate source based
|
||
on an all busy condition, enable this so the PBX will
|
||
recognize this condition and reroute the calls while the
|
||
composite link is down."
|
||
DEFVAL { enabled }
|
||
::= { portVoiceAdminEntry 14 }
|
||
|
||
portVoiceAdminFaxSupported OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The flag to indicate whether or not faxes will be
|
||
transmitted on the port. If no, all calls will be treated
|
||
as voice. If yes, both voice and fax will be transmitted."
|
||
DEFVAL { yes }
|
||
::= { portVoiceAdminEntry 15 }
|
||
|
||
portVoiceAdminTelephonyType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
opx (1),
|
||
slt (2),
|
||
em (3),
|
||
ac15 (4)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The type of interface (in conjunction with the
|
||
Interface Type) that will be used by the Voice channel.
|
||
This requires rebooting for the change to take effect.
|
||
Telephony Type Interface Type
|
||
-------------- --------------
|
||
OPX (FXO) Loop Start
|
||
SLT (FXS) Loop Start
|
||
E&M 4W E&M, 4W E&M TE, 2W E&M, 2W E&M TE
|
||
AC15 AC15A, AC15C"
|
||
DEFVAL { opx }
|
||
::= { portVoiceAdminEntry 16 }
|
||
|
||
portVoiceAdminJitter OBJECT-TYPE
|
||
SYNTAX INTEGER (10..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The amount of jitter delay."
|
||
DEFVAL { 80 }
|
||
::= { portVoiceAdminEntry 17 }
|
||
|
||
portVoiceAdminSampleDelay OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The amount of sample delay."
|
||
DEFVAL { 10 }
|
||
::= { portVoiceAdminEntry 18 }
|
||
|
||
portVoiceAdminDialTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (0..10)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The delay the node will use to determine when variable
|
||
length dialing is complete. (Variable length dialing allows
|
||
the user to place a call without entering the configured
|
||
number of digits for the speed dial number.)"
|
||
DEFVAL { 5 }
|
||
::= { portVoiceAdminEntry 19 }
|
||
|
||
portVoiceAdminAutoDial OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled (1),
|
||
enabled (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The flag to enable or disable the auto dial feature. Note
|
||
that enabling this feature will disable the variable length
|
||
dialing feature for this channel."
|
||
DEFVAL { disabled }
|
||
::= { portVoiceAdminEntry 20 }
|
||
|
||
portVoiceAdminSuppression OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
very-low (1),
|
||
low (2),
|
||
medium (3),
|
||
high (4),
|
||
very-high (5)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The silence suppression level. A larger silence suppression
|
||
level allows more data channels to operate simultaneously
|
||
with the voice channels."
|
||
DEFVAL { low }
|
||
::= { portVoiceAdminEntry 21 }
|
||
|
||
portVoiceAdminAutoDialNumber OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (0..4))
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The number to which the node will attempt to connect when
|
||
the handset attached to this port is taken off-hook. This
|
||
is applicable only when the Auto Dial feature is enabled."
|
||
::= { portVoiceAdminEntry 22 }
|
||
|
||
portVoiceAdminAutoPoll OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled (1),
|
||
enabled (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The flag to enable or disable auto polling. This is
|
||
applicable only when the Auto Dial feature is enabled.
|
||
When enabled, the node periodically polls the destination.
|
||
If the poll is not acknowledged, the node will busy-out
|
||
the channel. This can be useful in situations where the
|
||
destination is an emergency number that must always be
|
||
available. If the destination does not answer the automatic
|
||
poll, the busy-out condition will notify an attached PBX
|
||
that the emergency call should be routed to another call
|
||
routing device."
|
||
DEFVAL { disabled }
|
||
::= { portVoiceAdminEntry 23 }
|
||
|
||
portVoiceAdminAutoPollTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (5..30)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The frequency with which an Auto Poll will be sent. This
|
||
is applicable only when auto poll is enabled."
|
||
DEFVAL { 10 }
|
||
::= { portVoiceAdminEntry 24 }
|
||
|
||
portVoiceAdminExtDigitsSource OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
map (1),
|
||
user (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The source of the extended digits when the user of
|
||
attached equipment dials a speed dial number. This is
|
||
applicable only when the number of extended dial digits
|
||
is greater than zero. When map is specified, extended
|
||
digits are taken from the extended digits field in the
|
||
map table. When user is specified, extended digits are
|
||
taken from the user of attached equipment."
|
||
DEFVAL { map }
|
||
::= { portVoiceAdminEntry 25 }
|
||
|
||
portVoiceAdminNumDigitsDelete OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The number of leading dial digits that will be deleted
|
||
before a dial string is forwarded. This is primarily used
|
||
to delete leading dial digits that may be inserted by an
|
||
attached PBX."
|
||
DEFVAL { 0 }
|
||
::= { portVoiceAdminEntry 26 }
|
||
|
||
portVoiceAdminForwardDelay OBJECT-TYPE
|
||
SYNTAX INTEGER (0..40)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The length of a pause that can be inserted in an extended
|
||
dial string that is being forwarded. This is applicable only
|
||
when forwarded output digits is all or extended. When a comma
|
||
is encountered in an extended digits string, the node will
|
||
pause for the length of time specified here before additional
|
||
extended digits are forwarded."
|
||
DEFVAL { 2 }
|
||
::= { portVoiceAdminEntry 27 }
|
||
|
||
portVoiceAdminForwardedType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
dtmf (1),
|
||
pulse (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The method how the dial digits will be forwarded. This
|
||
is applicable only when forwarded output digits is all
|
||
or extended."
|
||
DEFVAL { dtmf }
|
||
::= { portVoiceAdminEntry 28 }
|
||
|
||
portVoiceAdminForwardedDigits OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
none (1),
|
||
all (2),
|
||
extended (3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The flag indicating which dial digits, if any, to forward.
|
||
If none, dial digits are not forwarded to the destination
|
||
device when a call is initiated on this channel. If all,
|
||
the dialed speed dial number and associated extended digits
|
||
are forwarded to the destination device. If extended, only
|
||
the extended digit string is forwarded."
|
||
DEFVAL { none }
|
||
::= { portVoiceAdminEntry 29 }
|
||
|
||
portVoiceAdminMakeRatio OBJECT-TYPE
|
||
SYNTAX INTEGER (20..80)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The make ratio of each digit pulse that is forwarded.
|
||
This is applicable only when forwarded output digits
|
||
is all or extended and forwarded digit type is pulse."
|
||
DEFVAL { 34 }
|
||
::= { portVoiceAdminEntry 30 }
|
||
|
||
portVoiceAdminBreakRatio OBJECT-TYPE
|
||
SYNTAX INTEGER (20..80)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The break ratio of each digit pulse that is forwarded.
|
||
This is applicable only when forwarded output digits
|
||
is all or extended and forwarded digit type is pulse."
|
||
DEFVAL { 66 }
|
||
::= { portVoiceAdminEntry 31 }
|
||
|
||
portVoiceAdminDTMFOnDuration OBJECT-TYPE
|
||
SYNTAX INTEGER (30..1000)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The length of a tone that will be used to produce a
|
||
single DTMF digit. This is applicable only when forwarded
|
||
output digits is all or extended and forwarded digit type
|
||
is DTMF."
|
||
DEFVAL { 100 }
|
||
::= { portVoiceAdminEntry 32 }
|
||
|
||
portVoiceAdminDTMFOffDuration OBJECT-TYPE
|
||
SYNTAX INTEGER (30..1000)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The length of silence between DTMF tones in a dial digit
|
||
string. This is applicable only when forwarded output digits
|
||
is all or extended and forwarded digit type is DTMF."
|
||
DEFVAL { 100 }
|
||
::= { portVoiceAdminEntry 33 }
|
||
|
||
portVoiceAdminToneType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
dtmf (1),
|
||
mf (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The tone type to detect/regenerate for forwarding DTMF/MF."
|
||
DEFVAL { dtmf }
|
||
::= { portVoiceAdminEntry 34 }
|
||
|
||
portVoiceAdminRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the portVoiceAdminTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device, and which is
|
||
supplied by a management station wishing to exercise an
|
||
on-line update of the existing conceptual row. For a
|
||
management protocol set operation, a genErr response is
|
||
returned when the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { portVoiceAdminEntry 35 }
|
||
|
||
--
|
||
-- The Voice Port Operational table
|
||
--
|
||
|
||
portVoiceOperTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortVoiceOperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of Voice ports. The number of entries
|
||
will be the number of Voice ports on the node."
|
||
::= { portVoiceGroup 2 }
|
||
|
||
portVoiceOperEntry OBJECT-TYPE
|
||
SYNTAX PortVoiceOperEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A Voice Port entry containing objects relating
|
||
to the port that are configurable by the user."
|
||
INDEX { portVoiceOperRlpIndex, portVoiceOperPortIndex }
|
||
::= { portVoiceOperTable 1 }
|
||
|
||
PortVoiceOperEntry ::=
|
||
SEQUENCE {
|
||
portVoiceOperRlpIndex
|
||
INTEGER,
|
||
portVoiceOperPortIndex
|
||
INTEGER,
|
||
portVoiceOperBlockedFlag
|
||
INTEGER,
|
||
portVoiceOperSpeed
|
||
INTEGER,
|
||
portVoiceOperDTMF
|
||
INTEGER,
|
||
portVoiceOperInterface
|
||
INTEGER,
|
||
portVoiceOperTETimer
|
||
INTEGER,
|
||
portVoiceOperLevelIn
|
||
INTEGER,
|
||
portVoiceOperLevelOut
|
||
INTEGER,
|
||
portVoiceOperCallTimer
|
||
INTEGER,
|
||
portVoiceOperHuntGroup
|
||
INTEGER,
|
||
portVoiceOperLongDialPrefix
|
||
OCTET STRING,
|
||
portVoiceOperSLTTimeout
|
||
INTEGER,
|
||
portVoiceOperLinkDownBusy
|
||
INTEGER,
|
||
portVoiceOperFaxSupported
|
||
INTEGER,
|
||
portVoiceOperTelephonyType
|
||
INTEGER,
|
||
portVoiceOperJitter
|
||
INTEGER,
|
||
portVoiceOperSampleDelay
|
||
INTEGER,
|
||
portVoiceOperDialTimer
|
||
INTEGER,
|
||
portVoiceOperAutoDial
|
||
INTEGER,
|
||
portVoiceOperSuppression
|
||
INTEGER,
|
||
portVoiceOperAutoDialNumber
|
||
OCTET STRING,
|
||
portVoiceOperAutoPoll
|
||
INTEGER,
|
||
portVoiceOperAutoPollTimer
|
||
INTEGER,
|
||
portVoiceOperExtDigitsSource
|
||
INTEGER,
|
||
portVoiceOperNumDigitsDelete
|
||
INTEGER,
|
||
portVoiceOperForwardDelay
|
||
INTEGER,
|
||
portVoiceOperForwardedType
|
||
INTEGER,
|
||
portVoiceOperForwardedDigits
|
||
INTEGER,
|
||
portVoiceOperMakeRatio
|
||
INTEGER,
|
||
portVoiceOperBreakRatio
|
||
INTEGER,
|
||
portVoiceOperDTMFOnDuration
|
||
INTEGER,
|
||
portVoiceOperDTMFOffDuration
|
||
INTEGER,
|
||
portVoiceOperToneType
|
||
INTEGER
|
||
}
|
||
|
||
portVoiceOperRlpIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The RLP number of the Voice port."
|
||
::= { portVoiceOperEntry 1 }
|
||
|
||
portVoiceOperPortIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The Port number of the Voice port."
|
||
::= { portVoiceOperEntry 2 }
|
||
|
||
portVoiceOperBlockedFlag OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled (1),
|
||
enabled (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The flag which causes the port to be enabled or disabled
|
||
at node IPL. The port will remain in that state until this
|
||
flag is changed and the node is rebooted, or until an on-
|
||
line enable or disable is performed."
|
||
::= { portVoiceOperEntry 3 }
|
||
|
||
portVoiceOperSpeed OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
bps-4800 (1),
|
||
bps-8000 (2),
|
||
bps-32000 (3),
|
||
bps-64000 (4)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The speed of the port which is transmitted as part
|
||
of a Call Setup frame. A Voice call will be established
|
||
if there is enough bandwidth at each end to provide the
|
||
minimum configured rate."
|
||
::= { portVoiceOperEntry 4 }
|
||
|
||
portVoiceOperDTMF OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The flag to enable, disable, or specify a time span
|
||
over which DTMF (Dual Tone Multi Frequency) tones will
|
||
be regenerated.
|
||
0 = pass tones transparently to the remote device.
|
||
1 = detect incoming tones and regenerate as received.
|
||
2-255 = regenerate tones for the specified seconds."
|
||
::= { portVoiceOperEntry 5 }
|
||
|
||
portVoiceOperInterface OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
em-4w (1),
|
||
em-2w (2),
|
||
loop-start (3),
|
||
ac15-a (4),
|
||
ac15-b (6),
|
||
em-4w-te (10),
|
||
em-2w-te (11)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The type of interface (in conjunction with the Telephony
|
||
Interface Type) that will be used by the Voice channel.
|
||
This requires rebooting for the change to take effect.
|
||
Telephony Type Interface Type
|
||
-------------- --------------
|
||
OPX (FXO) Loop Start
|
||
SLT (FXS) Loop Start
|
||
E&M 4W E&M, 4W E&M TE, 2W E&M, 2W E&M TE
|
||
AC15 AC15A, AC15C"
|
||
::= { portVoiceOperEntry 6 }
|
||
|
||
portVoiceOperTETimer OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The delay at which the E&M 'E' lead follows the 'M' lead."
|
||
::= { portVoiceOperEntry 7 }
|
||
|
||
portVoiceOperLevelIn OBJECT-TYPE
|
||
SYNTAX INTEGER (-22..7)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The local voice level into the voice port. This adjusts
|
||
the sensitivity of the local voice channel to the signal
|
||
from the attached device. The purpose of this is to match
|
||
the voice channel dB level to the input signal. A more
|
||
negative setting produces a higher input gain. If the level
|
||
is reduced, the voice channel will be more sensitive to the
|
||
input. This will also cause the voice output at the remote
|
||
device to sound louder."
|
||
::= { portVoiceOperEntry 8 }
|
||
|
||
portVoiceOperLevelOut OBJECT-TYPE
|
||
SYNTAX INTEGER (-22..7)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The local voice level out of the voice port. A more
|
||
positive setting produces a higher volume."
|
||
::= { portVoiceOperEntry 9 }
|
||
|
||
portVoiceOperCallTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (1..30)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The amount of time the node will wait for a response to a
|
||
Call Connect or Call Clear request. When the node issues a
|
||
request, it will set a timer to the value configured here.
|
||
If that timer expires with no response from the destination,
|
||
the node will generate a busy tone."
|
||
::= { portVoiceOperEntry 10 }
|
||
|
||
portVoiceOperHuntGroup OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
none (1),
|
||
a (2),
|
||
b (3)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The hunt group that includes the voice channel."
|
||
::= { portVoiceOperEntry 11 }
|
||
|
||
portVoiceOperLongDialPrefix OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (1))
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The character that will be required preceeding calls using
|
||
the long call format. When the user at an attached device
|
||
dials a long form number, it must be preceeded by the prefix
|
||
character specified here."
|
||
::= { portVoiceOperEntry 12 }
|
||
|
||
portVoiceOperSLTTimeout OBJECT-TYPE
|
||
SYNTAX INTEGER (1..99)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The time the local port will wait before an actual fax
|
||
transmission begins. If there is no fax tone when this
|
||
timer expires, the connection will be terminated."
|
||
::= { portVoiceOperEntry 13 }
|
||
|
||
portVoiceOperLinkDownBusy OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled (1),
|
||
enabled (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This flag enables or disables automatic busy-out of
|
||
channels when the link is down. When enabled, the system
|
||
will automatically busy-out channels when the composite
|
||
link is down. When disabled, channels remain on-hook when
|
||
the link is down. If your application is connected to a
|
||
PBX that can route calls to another alternate source based
|
||
on an all busy condition, enable this so the PBX will
|
||
recognize this condition and reroute the calls while the
|
||
composite link is down."
|
||
::= { portVoiceOperEntry 14 }
|
||
|
||
portVoiceOperFaxSupported OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The flag to indicate whether or not faxes will be
|
||
transmitted on the port. If no, all calls will be treated
|
||
as voice. If yes, both voice and fax will be transmitted."
|
||
::= { portVoiceOperEntry 15 }
|
||
|
||
portVoiceOperTelephonyType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
opx (1),
|
||
slt (2),
|
||
em (3),
|
||
ac15 (4)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The type of interface (in conjunction with the
|
||
Interface Type) that will be used by the Voice channel.
|
||
This requires rebooting for the change to take effect.
|
||
Telephony Type Interface Type
|
||
-------------- --------------
|
||
OPX (FXO) Loop Start
|
||
SLT (FXS) Loop Start
|
||
E&M 4W E&M, 4W E&M TE, 2W E&M, 2W E&M TE
|
||
AC15 AC15A, AC15C"
|
||
::= { portVoiceOperEntry 16 }
|
||
|
||
portVoiceOperJitter OBJECT-TYPE
|
||
SYNTAX INTEGER (10..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The amount of jitter delay."
|
||
::= { portVoiceOperEntry 17 }
|
||
|
||
portVoiceOperSampleDelay OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The amount of sample delay."
|
||
::= { portVoiceOperEntry 18 }
|
||
|
||
portVoiceOperDialTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (0..10)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The delay the node will use to determine when variable
|
||
length dialing is complete. (Variable length dialing allows
|
||
the user to place a call without entering the configured
|
||
number of digits for the speed dial number.)"
|
||
::= { portVoiceOperEntry 19 }
|
||
|
||
portVoiceOperAutoDial OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled (1),
|
||
enabled (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The flag to enable or disable the auto dial feature. Note
|
||
that enabling this feature will disable the variable length
|
||
dialing feature for this channel."
|
||
::= { portVoiceOperEntry 20 }
|
||
|
||
portVoiceOperSuppression OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
very-low (1),
|
||
low (2),
|
||
medium (3),
|
||
high (4),
|
||
very-high (5)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The silence suppression level. A larger silence suppression
|
||
level allows more data channels to operate simultaneously
|
||
with the voice channels."
|
||
::= { portVoiceOperEntry 21 }
|
||
|
||
portVoiceOperAutoDialNumber OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (0..4))
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The number to which the node will attempt to connect when
|
||
the handset attached to this port is taken off-hook. This
|
||
is applicable only when the Auto Dial feature is enabled."
|
||
::= { portVoiceOperEntry 22 }
|
||
|
||
portVoiceOperAutoPoll OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled (1),
|
||
enabled (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The flag to enable or disable auto polling. This is
|
||
applicable only when the Auto Dial feature is enabled.
|
||
When enabled, the node periodically polls the destination.
|
||
If the poll is not acknowledged, the node will busy-out
|
||
the channel. This can be useful in situations where the
|
||
destination is an emergency number that must always be
|
||
available. If the destination does not answer the automatic
|
||
poll, the busy-out condition will notify an attached PBX
|
||
that the emergency call should be routed to another call
|
||
routing device."
|
||
::= { portVoiceOperEntry 23 }
|
||
|
||
portVoiceOperAutoPollTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (5..30)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The frequency with which an Auto Poll will be sent. This
|
||
is applicable only when auto poll is enabled."
|
||
::= { portVoiceOperEntry 24 }
|
||
|
||
portVoiceOperExtDigitsSource OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
map (1),
|
||
user (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The source of the extended digits when the user of
|
||
attached equipment dials a speed dial number. This is
|
||
applicable only when the number of extended dial digits
|
||
is greater than zero. When map is specified, extended
|
||
digits are taken from the extended digits field in the
|
||
map table. When user is specified, extended digits are
|
||
taken from the user of attached equipment."
|
||
::= { portVoiceOperEntry 25 }
|
||
|
||
portVoiceOperNumDigitsDelete OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The number of leading dial digits that will be deleted
|
||
before a dial string is forwarded. This is primarily used
|
||
to delete leading dial digits that may be inserted by an
|
||
attached PBX."
|
||
::= { portVoiceOperEntry 26 }
|
||
|
||
portVoiceOperForwardDelay OBJECT-TYPE
|
||
SYNTAX INTEGER (0..40)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The length of a pause that can be inserted in an extended
|
||
dial string that is being forwarded. This is applicable only
|
||
when forwarded output digits is all or extended. When a comma
|
||
is encountered in an extended digits string, the node will
|
||
pause for the length of time specified here before additional
|
||
extended digits are forwarded."
|
||
::= { portVoiceOperEntry 27 }
|
||
|
||
portVoiceOperForwardedType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
dtmf (1),
|
||
pulse (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The method how the dial digits will be forwarded. This
|
||
is applicable only when forwarded output digits is all
|
||
or extended."
|
||
::= { portVoiceOperEntry 28 }
|
||
|
||
portVoiceOperForwardedDigits OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
none (1),
|
||
all (2),
|
||
extended (3)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The flag indicating which dial digits, if any, to forward.
|
||
If none, dial digits are not forwarded to the destination
|
||
device when a call is initiated on this channel. If all,
|
||
the dialed speed dial number and associated extended digits
|
||
are forwarded to the destination device. If extended, only
|
||
the extended digit string is forwarded."
|
||
::= { portVoiceOperEntry 29 }
|
||
|
||
portVoiceOperMakeRatio OBJECT-TYPE
|
||
SYNTAX INTEGER (20..80)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The make ratio of each digit pulse that is forwarded.
|
||
This is applicable only when forwarded output digits
|
||
is all or extended and forwarded digit type is pulse."
|
||
::= { portVoiceOperEntry 30 }
|
||
|
||
portVoiceOperBreakRatio OBJECT-TYPE
|
||
SYNTAX INTEGER (20..80)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The break ratio of each digit pulse that is forwarded.
|
||
This is applicable only when forwarded output digits
|
||
is all or extended and forwarded digit type is pulse."
|
||
::= { portVoiceOperEntry 31 }
|
||
|
||
portVoiceOperDTMFOnDuration OBJECT-TYPE
|
||
SYNTAX INTEGER (30..1000)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The length of a tone that will be used to produce a
|
||
single DTMF digit. This is applicable only when forwarded
|
||
output digits is all or extended and forwarded digit type
|
||
is DTMF."
|
||
::= { portVoiceOperEntry 32 }
|
||
|
||
portVoiceOperDTMFOffDuration OBJECT-TYPE
|
||
SYNTAX INTEGER (30..1000)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The length of silence between DTMF tones in a dial digit
|
||
string. This is applicable only when forwarded output digits
|
||
is all or extended and forwarded digit type is DTMF."
|
||
::= { portVoiceOperEntry 33 }
|
||
|
||
portVoiceOperToneType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
dtmf (1),
|
||
mf (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The tone type to detect/regenerate for forwarding DTMF/MF."
|
||
::= { portVoiceOperEntry 34 }
|
||
|
||
-- **********************************
|
||
-- * THE NETLINK INTERFACES GROUP *
|
||
-- **********************************
|
||
|
||
nlInterfaces OBJECT IDENTIFIER ::= { local 4 }
|
||
|
||
-- The nlIinterfaces group is a netlink table which contains all interfaces
|
||
-- indexed by RLP and port
|
||
|
||
--
|
||
-- The Netlink If Table
|
||
--
|
||
-- This table is used to correlate an RLP and Port number to a MIB-II
|
||
-- Interface Table entry and a Netlink Interface Table entry. The table
|
||
-- is indexed by RLP and port number.
|
||
-- The range of RLP numbers can be:
|
||
-- 1-8 = RLP cards
|
||
-- 250 = IP Interfaces
|
||
-- 251 = IPX Interfaces
|
||
-- 252 = LLC2 Interfaces
|
||
-- The range of port numbers can be:
|
||
-- For RLP cards (RLP 1-8) :
|
||
-- 1-8 = Physical Port
|
||
-- 9-64 = Logical Port
|
||
-- For IP Interfaces (RLP 250) :
|
||
-- 1-257 = the interface number - FRX4000/FRX6000 version 3.4
|
||
-- 1-129 = the interface number - other FRX4000/FRX6000 and FRX7000
|
||
-- For IPX Interfaces (RLP 251) :
|
||
-- 1-64 = the interface number
|
||
-- For LLC2 Interfaces (RLP 252) :
|
||
-- 1-96 = the interface number - FRX4000/FRX6000
|
||
-- 1-251 = the interface number - FRX7000
|
||
|
||
nlIfTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF NlIfEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to describe each interface on a node.
|
||
This table is indexed by RLP and Port number and can be used to
|
||
identify the corresponding MIB-II ifIndex of a Port as well as
|
||
additional port information maintained by Netlink."
|
||
::= { nlInterfaces 1 }
|
||
|
||
nlIfEntry OBJECT-TYPE
|
||
SYNTAX NlIfEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "An Interface entry containing objects relating to interfaces."
|
||
INDEX { nlIfRlp, nlIfPort }
|
||
::= { nlIfTable 1 }
|
||
|
||
NlIfEntry ::=
|
||
SEQUENCE {
|
||
nlIfRlp
|
||
INTEGER,
|
||
nlIfPort
|
||
INTEGER,
|
||
nlIfType
|
||
INTEGER,
|
||
nlIfIndex
|
||
INTEGER,
|
||
nlIfTableIndex
|
||
INTEGER,
|
||
nlIfTableOid
|
||
OBJECT IDENTIFIER,
|
||
nlIfConnectorType
|
||
INTEGER,
|
||
nlIfPortStatus
|
||
INTEGER,
|
||
nlIfPhyPort
|
||
INTEGER
|
||
}
|
||
|
||
nlIfRlp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP number on the node. RLP numbers 1-8 are Physical
|
||
RLP cards, and RLP number 250, 251 and 252 define IP, IPX and LLC2
|
||
interfaces respectively."
|
||
::= { nlIfEntry 1 }
|
||
|
||
nlIfPort OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Port number on the RLP. Port numbers 1-8 are
|
||
known to be physical ports, and 9-64 are logical ports. If the
|
||
RLP number identifies an IP, IPX or LLC2 interface, then the port
|
||
number can be 1-257 (IP), 1-64 (IPX), or 1-96 (LLC2)."
|
||
::= { nlIfEntry 2 }
|
||
|
||
nlIfType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1), -- none of the following
|
||
regular1822(2),
|
||
hdh1822(3),
|
||
ddnX25(4),
|
||
rfc877x25(5),
|
||
ethernetCsmacd(6),
|
||
iso88023Csmacd(7),
|
||
iso88024TokenBus(8),
|
||
iso88025TokenRing(9),
|
||
iso88026Man(10),
|
||
starLan(11),
|
||
proteon10Mbit(12),
|
||
proteon80Mbit(13),
|
||
hyperchannel(14),
|
||
fddi(15),
|
||
lapb(16),
|
||
sdlc(17),
|
||
ds1(18), -- DS1/E1 (RFC 1406)
|
||
e1(19), -- obsolete
|
||
basicISDN(20),
|
||
primaryISDN(21),
|
||
propPointToPointSerial(22), -- proprietary serial
|
||
ppp(23),
|
||
softwareLoopback(24),
|
||
eon(25), -- CLNP over IP (RFC 1070)
|
||
ethernet3Mbit(26),
|
||
nsip(27), -- XNS over IP
|
||
slip(28), -- generic SLIP
|
||
ultra(29), -- ULTRA technologies
|
||
ds3(30), -- T-3
|
||
sip(31), -- SMDS
|
||
frameRelay(32), -- DTE only
|
||
rs232(33),
|
||
para(34), -- parallel-port
|
||
arcnet(35), -- arcnet
|
||
arcnetPlus(36), -- arcnet plus
|
||
atm(37), -- ATM cells
|
||
miox25(38),
|
||
sonet(39), -- SONET or SDH
|
||
x25ple(40),
|
||
iso88022llc(41),
|
||
localTalk(42),
|
||
smdsDxi(43),
|
||
frameRelayService(44), -- Frame relay DCE
|
||
v35(45),
|
||
hssi(46),
|
||
hippi(47),
|
||
modem(48), -- Generic modem
|
||
aal5(49), -- AAL5 over ATM
|
||
sonetPath(50),
|
||
sonetVT(51),
|
||
smdsIcip(52), -- SMDS InterCarrier Interface
|
||
propVirtual(53), -- proprietary virtual/internal
|
||
propMultiplexor(54), -- proprietary multiplexing
|
||
trunk(200), -- NETLINK: Trunk port
|
||
async(201), -- NETLINK: Async port
|
||
bsci(202), -- NETLINK: Bsci port
|
||
logicalPort(203), -- NETLINK: Logical port
|
||
t1(204), -- NETLINK: T1 port
|
||
ip(205), -- NETLINK: IP interface
|
||
ipx(206), -- NETLINK: IPX interface
|
||
llc2(207), -- NETLINK: LLC2 interface
|
||
voice(208)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The type of interface"
|
||
::= { nlIfEntry 3 }
|
||
|
||
nlIfIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The associated index into the MIB-II ifTable for this
|
||
port"
|
||
::= { nlIfEntry 4 }
|
||
|
||
nlIfTableIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The associated index into an enterprise table used to
|
||
describe additional information for this port. See nlIfTableOid as the
|
||
pointer to the actual table."
|
||
::= { nlIfEntry 5 }
|
||
|
||
nlIfTableOid OBJECT-TYPE
|
||
SYNTAX OBJECT IDENTIFIER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The OID of the table Entry that contains additional
|
||
information about this port. The OID will point to a specific table
|
||
depending on the type of port."
|
||
::= { nlIfEntry 6 }
|
||
|
||
nlIfConnectorType OBJECT-TYPE
|
||
SYNTAX INTEGER { none(2),
|
||
rs232(3),
|
||
v25bis-dial(4),
|
||
v35(5),
|
||
rs449(6),
|
||
rs530(7),
|
||
x21(8),
|
||
csudsu(9),
|
||
t1(10),
|
||
e1(11),
|
||
voice(13)
|
||
}
|
||
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The physical connector type used for this port. Valid
|
||
for ports 1-8 only."
|
||
::= { nlIfEntry 7 }
|
||
|
||
nlIfPortStatus OBJECT-TYPE
|
||
SYNTAX INTEGER { linkUp(1),
|
||
restarting(2),
|
||
operational(3),
|
||
disabled(4),
|
||
disconnect(5),
|
||
configured(6),
|
||
dialReady(7),
|
||
quiesced(8),
|
||
failed(9),
|
||
hardwareFault(10),
|
||
other(11),
|
||
ipl(12),
|
||
na(13),
|
||
remoteLoopback(14),
|
||
blueAlarm(15),
|
||
yellowAlarm(16),
|
||
redAlarm(17),
|
||
onHook(18),
|
||
offHook(19),
|
||
dialing(20),
|
||
activeVoiceCall(21),
|
||
onHookPending(22)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The status of this port state. Valid for ports 1-64 only."
|
||
::= { nlIfEntry 8 }
|
||
|
||
nlIfPhyPort OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Underlying Physical Port number on the RLP of this
|
||
logical port. Port numbers 1-8 are valid, but this field is only
|
||
applicable if the nlIfPort field is 9-64."
|
||
::= { nlIfEntry 9 }
|
||
|
||
nlIfLlc2Interfaces OBJECT IDENTIFIER ::= { nlInterfaces 2}
|
||
|
||
--
|
||
-- The Netlink LLC2 Interface Tables
|
||
--
|
||
|
||
nlIfLlc2LANTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF NlIfLlc2LANEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to define LLC2 interfaces over LAN."
|
||
::= { nlIfLlc2Interfaces 1 }
|
||
|
||
nlIfLlc2LANEntry OBJECT-TYPE
|
||
SYNTAX NlIfLlc2LANEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "An LLC2 LAN Interface entry containing objects relating
|
||
to LLC2 LAN interfaces."
|
||
INDEX { nlIfLlc2LANRlp, nlIfLlc2LANPort }
|
||
::= { nlIfLlc2LANTable 1 }
|
||
|
||
NlIfLlc2LANEntry ::=
|
||
SEQUENCE {
|
||
nlIfLlc2LANRlp INTEGER,
|
||
nlIfLlc2LANPort INTEGER,
|
||
nlIfLlc2LANType INTEGER,
|
||
nlIfLlc2LANCard INTEGER,
|
||
nlIfLlc2LANID INTEGER,
|
||
nlIfLlc2LANInterface INTEGER,
|
||
nlIfLlc2LANRowStatus RowStatus,
|
||
nlIfLlc2LANPriority INTEGER,
|
||
nlIfLlc2LANBlockedPortFlag INTEGER
|
||
}
|
||
|
||
nlIfLlc2LANRlp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP number on the node. For LLC2 LAN interfaces,
|
||
this must be 252."
|
||
::= { nlIfLlc2LANEntry 1 }
|
||
|
||
nlIfLlc2LANPort OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Port number on the RLP. For LLC2 LAN interfaces,
|
||
this corresponds to the LAN card number."
|
||
::= { nlIfLlc2LANEntry 2 }
|
||
|
||
nlIfLlc2LANType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
ethernet (1),
|
||
token-ring (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The type of the LLC2 interface- either ethernet or
|
||
token ring."
|
||
DEFVAL { ethernet }
|
||
::= { nlIfLlc2LANEntry 3 }
|
||
|
||
nlIfLlc2LANCard OBJECT-TYPE
|
||
SYNTAX INTEGER (1..2)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The LAN card that the LLC2 interface is running on."
|
||
::= { nlIfLlc2LANEntry 4 }
|
||
|
||
nlIfLlc2LANID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4095)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Valid only if the type of the LLC2 LAN interface is
|
||
token ring. Identifies the token ring adapter to the network."
|
||
DEFVAL { 4095 }
|
||
::= { nlIfLlc2LANEntry 5 }
|
||
|
||
nlIfLlc2LANInterface OBJECT-TYPE
|
||
SYNTAX INTEGER (1..2)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The LLC2 interface number."
|
||
::= { nlIfLlc2LANEntry 6 }
|
||
|
||
nlIfLlc2LANRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the nlIfLlc2LANTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { nlIfLlc2LANEntry 7 }
|
||
|
||
nlIfLlc2LANPriority OBJECT-TYPE
|
||
SYNTAX INTEGER (0..9)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Interface priority- allows setting a priority for traffic
|
||
within the node. The higher the number, the higher the priority relative
|
||
to other intra-nodal traffic."
|
||
DEFVAL { 0 }
|
||
::= {nlIfLlc2LANEntry 8}
|
||
|
||
nlIfLlc2LANBlockedPortFlag OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The blocked port flag."
|
||
DEFVAL { no }
|
||
::= { nlIfLlc2LANEntry 9 }
|
||
|
||
nlIfLlc2FrTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF NlIfLlc2FrEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to define LLC2 interfaces over Frame Relay."
|
||
::= { nlIfLlc2Interfaces 2 }
|
||
|
||
nlIfLlc2FrEntry OBJECT-TYPE
|
||
SYNTAX NlIfLlc2FrEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "An LLC2 FR Interface entry containing objects relating
|
||
to LLC2 FR interfaces."
|
||
INDEX { nlIfLlc2FrRlp, nlIfLlc2FrPort, nlIfLlc2FrDLCI, nlIfLlc2FrFormat }
|
||
::= { nlIfLlc2FrTable 1 }
|
||
|
||
NlIfLlc2FrEntry ::=
|
||
SEQUENCE {
|
||
nlIfLlc2FrRlp INTEGER,
|
||
nlIfLlc2FrPort INTEGER,
|
||
nlIfLlc2FrDLCI INTEGER,
|
||
nlIfLlc2FrFormat INTEGER,
|
||
nlIfLlc2FrPriority INTEGER,
|
||
nlIfLlc2FrBAG INTEGER,
|
||
nlIfLlc2FrHostMACAddress MacAddress,
|
||
nlIfLlc2FrSessionType INTEGER,
|
||
nlIfLlc2FrLANID INTEGER,
|
||
nlIfLlc2FrInterface INTEGER,
|
||
nlIfLlc2FrRowStatus RowStatus,
|
||
nlIfLlc2FrBlockedPortFlag INTEGER
|
||
}
|
||
|
||
nlIfLlc2FrRlp OBJECT-TYPE
|
||
SYNTAX INTEGER (1..8)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP number on the node."
|
||
::= { nlIfLlc2FrEntry 1 }
|
||
|
||
nlIfLlc2FrPort OBJECT-TYPE
|
||
SYNTAX INTEGER (1..255)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Port number on the RLP. Port numbers 1-8 are
|
||
known to be physical ports, and channels are 193-241."
|
||
::= { nlIfLlc2FrEntry 2 }
|
||
|
||
nlIfLlc2FrDLCI OBJECT-TYPE
|
||
SYNTAX INTEGER (16..991)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The DLCI number used to identify the entry in the table.
|
||
The range is 16-991. "
|
||
::= { nlIfLlc2FrEntry 3 }
|
||
|
||
nlIfLlc2FrFormat OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
native-llc2 (1),
|
||
tb-8023 (2),
|
||
srb-8025 (3)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The RFC1490 encapsulation method used for LLC2 traffic."
|
||
::= {nlIfLlc2FrEntry 4}
|
||
|
||
nlIfLlc2FrPriority OBJECT-TYPE
|
||
SYNTAX INTEGER (0..9)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Interface priority- allows setting a priority for traffic
|
||
within the node. The higher the number, the higher the priority relative
|
||
to other intra-nodal traffic."
|
||
DEFVAL { 0 }
|
||
::= {nlIfLlc2FrEntry 5}
|
||
|
||
nlIfLlc2FrBAG OBJECT-TYPE
|
||
SYNTAX INTEGER (1..16)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Assigns the interface to one of sixteen groups whose parameters
|
||
regulate bandwidth usage."
|
||
DEFVAL { 1 }
|
||
::= {nlIfLlc2FrEntry 6}
|
||
|
||
nlIfLlc2FrHostMACAddress OBJECT-TYPE
|
||
SYNTAX MacAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The MAC address of the host or workstation to which
|
||
the remote device needs to connect. Valid only if the format is
|
||
native-llc2."
|
||
DEFVAL { '400000000001'H } -- 40:00:00:00:00:01
|
||
::= {nlIfLlc2FrEntry 7}
|
||
|
||
nlIfLlc2FrSessionType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
terminated (1),
|
||
originated (2),
|
||
not-applicable (3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "If originated, means that LLC2 connects from the configured
|
||
Host MAC address can use this interface. If terminated, connections to
|
||
the configured address can use this interface. Valid only if the
|
||
format is native-llc2."
|
||
DEFVAL { originated }
|
||
::= {nlIfLlc2FrEntry 8}
|
||
|
||
nlIfLlc2FrLANID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4095)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Identifies the ring number used by a frame relay-compliant
|
||
source-route bridge at the other end of this PVC. Valid only if the
|
||
format is srb-8025."
|
||
DEFVAL { 4095 }
|
||
::= { nlIfLlc2FrEntry 9 }
|
||
|
||
nlIfLlc2FrInterface OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "LLC2 interface number."
|
||
::= { nlIfLlc2FrEntry 10 }
|
||
|
||
nlIfLlc2FrRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the nlIfLlc2FrTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { nlIfLlc2FrEntry 11 }
|
||
|
||
nlIfLlc2FrBlockedPortFlag OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The blocked port flag."
|
||
DEFVAL { no }
|
||
::= { nlIfLlc2FrEntry 12 }
|
||
|
||
ipxConfig OBJECT IDENTIFIER ::= { nlInterfaces 3 }
|
||
ipxConfigRouting OBJECT IDENTIFIER ::= { ipxConfig 1 }
|
||
|
||
-- Routing Group
|
||
|
||
-- Static Route Config Table
|
||
-- The static route config table contains an entry for each static route entry
|
||
-- in the system
|
||
|
||
ipxStaticRouteConfigTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF IPXStaticRouteConfigEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "The IPX Static Route Configuration Table"
|
||
::= {ipxConfigRouting 1}
|
||
|
||
ipxStaticRouteConfigEntry OBJECT-TYPE
|
||
SYNTAX IPXStaticRouteConfigEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "Each entry corresponds to one instance of IPX Static Routing on the system"
|
||
INDEX {ipxStaticRouteConfigCircIndex,
|
||
ipxStaticRouteConfigNetNum
|
||
}
|
||
|
||
::= {ipxStaticRouteConfigTable 1}
|
||
|
||
IPXStaticRouteConfigEntry ::= SEQUENCE {
|
||
ipxStaticRouteConfigCircIndex
|
||
INTEGER,
|
||
ipxStaticRouteConfigNetNum
|
||
OCTET STRING,
|
||
ipxStaticRouteConfigRouter
|
||
OCTET STRING,
|
||
ipxStaticRouteConfigRowStatus
|
||
RowStatus
|
||
}
|
||
|
||
ipxStaticRouteConfigCircIndex OBJECT-TYPE
|
||
SYNTAX INTEGER (1..65535)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The unique identifier of the circuit used to reach the
|
||
first hop in the static route"
|
||
::= {ipxStaticRouteConfigEntry 1}
|
||
|
||
ipxStaticRouteConfigNetNum OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(4))
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The IPX network number of the route's destination"
|
||
::= {ipxStaticRouteConfigEntry 2}
|
||
|
||
ipxStaticRouteConfigRouter OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(6))
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The hex value of the node address of the router that will forward a packet when this route is used.
|
||
If Novell's IPXWAN is used on the interface, this field will be ignored "
|
||
::= {ipxStaticRouteConfigEntry 3}
|
||
|
||
ipxStaticRouteConfigRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the ipxStaticRouteTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= {ipxStaticRouteConfigEntry 4}
|
||
|
||
-- Static SAP Config Table
|
||
-- The static SAP config table contains an entry for each SAP route entry
|
||
-- in the system
|
||
|
||
ipxServConfigTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF IPXServConfigEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "The IPX Static Route Configuration Table"
|
||
::= {ipxConfigRouting 2}
|
||
|
||
ipxServConfigEntry OBJECT-TYPE
|
||
SYNTAX IPXServConfigEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "Each entry corresponds to one instance of IPX Static Routing on the system"
|
||
INDEX {ipxServConfigServiceType,
|
||
ipxServConfigServName
|
||
}
|
||
|
||
::= {ipxServConfigTable 1}
|
||
|
||
IPXServConfigEntry ::= SEQUENCE {
|
||
ipxServConfigServiceType
|
||
INTEGER,
|
||
ipxServConfigServName
|
||
OCTET STRING,
|
||
ipxServConfigServNetworkAddress
|
||
INTEGER,
|
||
ipxServConfigServNodeAddress
|
||
OCTET STRING,
|
||
ipxServConfigServSocketNumber
|
||
INTEGER,
|
||
ipxServConfigInterveningNetworks
|
||
INTEGER,
|
||
ipxServConfigGatewayAddress
|
||
OCTET STRING,
|
||
ipxServConfigInterface
|
||
INTEGER,
|
||
ipxServConfigRowStatus
|
||
RowStatus
|
||
}
|
||
|
||
ipxServConfigServiceType OBJECT-TYPE
|
||
SYNTAX INTEGER (1..65535)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Service Type, a SAP service code "
|
||
::= {ipxServConfigEntry 1}
|
||
|
||
ipxServConfigServName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..48))
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Sercice Name, identifies a specific server in the IPX network. "
|
||
::= {ipxServConfigEntry 2}
|
||
|
||
ipxServConfigServNetworkAddress OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The IPX network number portion of the IPX address of the server identified by ServName "
|
||
DEFVAL { 1 }
|
||
::= {ipxServConfigEntry 3}
|
||
|
||
ipxServConfigServNodeAddress OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(6))
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The node portion of the IPX address of the service"
|
||
::= {ipxServConfigEntry 4}
|
||
|
||
ipxServConfigServSocketNumber OBJECT-TYPE
|
||
SYNTAX INTEGER (0..65535)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The socket portion of the IPX address of the service"
|
||
DEFVAL { 0 }
|
||
::= {ipxServConfigEntry 5}
|
||
|
||
ipxServConfigInterveningNetworks OBJECT-TYPE
|
||
SYNTAX INTEGER (1..65535)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of routers that a packet must pass through t reach the server"
|
||
DEFVAL { 1 }
|
||
::= {ipxServConfigEntry 6}
|
||
|
||
ipxServConfigGatewayAddress OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(6))
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The node address of the router thar will forward a packet"
|
||
::= {ipxServConfigEntry 7}
|
||
|
||
ipxServConfigInterface OBJECT-TYPE
|
||
SYNTAX INTEGER (0..65535)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The IPX network number assigned to the interface used to send packets that are destined for this server"
|
||
DEFVAL { 0 }
|
||
::= {ipxServConfigEntry 8}
|
||
|
||
ipxServConfigRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the ipxServTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= {ipxServConfigEntry 9}
|
||
|
||
ipxConfigInterface OBJECT IDENTIFIER ::= { ipxConfig 2 }
|
||
|
||
-- Interface Group
|
||
|
||
-- Interface Table
|
||
|
||
ipxInterfaceTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF IPXInterfaceEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "The IPX Interface Table"
|
||
::= {ipxConfigInterface 6}
|
||
|
||
ipxInterfaceEntry OBJECT-TYPE
|
||
SYNTAX IPXInterfaceEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
INDEX {ipxInterfaceNumber
|
||
}
|
||
|
||
::= {ipxInterfaceTable 1}
|
||
|
||
IPXInterfaceEntry ::= SEQUENCE {
|
||
ipxInterfaceNumber INTEGER,
|
||
ipxInterfaceBlockedPortFlag INTEGER,
|
||
ipxInterfaceType INTEGER,
|
||
ipxInterfaceFrameType INTEGER,
|
||
ipxInterfaceMaxTransUnit INTEGER,
|
||
ipxInterfaceNetworkAddress INTEGER,
|
||
ipxInterfaceBandwidthAllocGroup INTEGER,
|
||
ipxInterfacePortDiagEnabled INTEGER,
|
||
ipxInterfaceNetBIOSEnabled INTEGER,
|
||
ipxInterfaceNetBIOSHops INTEGER,
|
||
ipxInterfacePeriodicRIPEnabled INTEGER,
|
||
ipxInterfacePeriodicRIPTimer INTEGER,
|
||
ipxInterfacePeriodicSAPEnabled INTEGER,
|
||
ipxInterfacePeriodicSAPTimer INTEGER,
|
||
ipxInterfaceRIPEnabled INTEGER,
|
||
ipxInterfaceRIPAgeTimer INTEGER,
|
||
ipxInterfaceRIPMaxSize INTEGER,
|
||
ipxInterfaceSAPEnabled INTEGER,
|
||
ipxInterfaceSAPAgeTimer INTEGER,
|
||
ipxInterfaceTransportTime INTEGER,
|
||
ipxInterfaceSerializationEnabled INTEGER,
|
||
ipxInterfaceWatchdogSpoofingEnabled INTEGER,
|
||
ipxInterfaceLanCardNumber INTEGER,
|
||
ipxInterfaceWanEnabled INTEGER,
|
||
ipxInterfaceSourceSubscriber OCTET STRING,
|
||
ipxInterfaceDestinationSubscriber OCTET STRING,
|
||
ipxInterfaceSVCRetryTimer INTEGER,
|
||
ipxInterfaceSVCIdleTimer INTEGER,
|
||
ipxInterfaceMaxVC INTEGER,
|
||
ipxInterfacePVCConnection INTEGER,
|
||
ipxInterfaceSourceCard INTEGER,
|
||
ipxInterfaceSourcePort INTEGER,
|
||
ipxInterfaceSourceDLCI INTEGER,
|
||
ipxInterfaceRowStatus RowStatus
|
||
}
|
||
|
||
ipxInterfaceNumber OBJECT-TYPE
|
||
SYNTAX INTEGER (1..64)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Interface Number, a sequential number to identify the interface"
|
||
::= {ipxInterfaceEntry 1}
|
||
|
||
ipxInterfaceBlockedPortFlag OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{ no(1),
|
||
yes(2)
|
||
}
|
||
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "This flag causes the IPX interface to be enabled (N) or disabled (Y) at node IPL. The port
|
||
will remain in that state until this parameter is changed"
|
||
::= {ipxInterfaceEntry 2}
|
||
|
||
ipxInterfaceType OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{ ethernet(1),
|
||
eight025(2),
|
||
x25(3),
|
||
frl(4)
|
||
}
|
||
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The interface type. 802.5 is not valid on FRX4000"
|
||
::= {ipxInterfaceEntry 3}
|
||
|
||
ipxInterfaceFrameType OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{ typeII(1),
|
||
raw(2),
|
||
llc(3),
|
||
snap(4)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The frame type - depends on the interfece type. Valid combinations are:
|
||
Ethernet, 802.5 - typeII, raw, llc, snap
|
||
Frame relay, X25 - typeII"
|
||
DEFVAL { typeII }
|
||
::= {ipxInterfaceEntry 4}
|
||
|
||
ipxInterfaceMaxTransUnit OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Maximum frame size that can be transmitted or received over the IPX interface.: Valid ranges are:
|
||
Ethernet - (45-1518)
|
||
802.5 - (48-4096)
|
||
Frame relay, X25 - (31-4096) "
|
||
DEFVAL { 4096 }
|
||
::= {ipxInterfaceEntry 5}
|
||
|
||
ipxInterfaceNetworkAddress OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Identifies the local interface to the Novell Network"
|
||
DEFVAL { 0 }
|
||
::= {ipxInterfaceEntry 6}
|
||
|
||
ipxInterfaceBandwidthAllocGroup OBJECT-TYPE
|
||
SYNTAX INTEGER (1..16)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Assigns the IPX interface to one of sixteen groups whose parameters regulate bandwidth usage"
|
||
DEFVAL { 1 }
|
||
::= {ipxInterfaceEntry 7}
|
||
|
||
ipxInterfacePortDiagEnabled OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{ no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Enables/Disables the IPX interface's ability to handle Novell diagonistics packets"
|
||
DEFVAL { no }
|
||
::= {ipxInterfaceEntry 8}
|
||
|
||
ipxInterfaceNetBIOSEnabled OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{ no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Determines whether Novell-encapsulated NetBIOS
|
||
frames received on the interface will be processed"
|
||
DEFVAL { no }
|
||
::= {ipxInterfaceEntry 9}
|
||
|
||
ipxInterfaceNetBIOSHops OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Maximum number of hops allowed for routing a Novell-encapsulated NetBIOS frame"
|
||
DEFVAL { 8 }
|
||
::= {ipxInterfaceEntry 10}
|
||
|
||
ipxInterfacePeriodicRIPEnabled OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{ no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Determines whether the node will originate periodic IPX Routing Information Protocol messages
|
||
from this interface to inform the network that the route through this interface is viable"
|
||
DEFVAL { no }
|
||
::= {ipxInterfaceEntry 11}
|
||
|
||
ipxInterfacePeriodicRIPTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (1..65535)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "This is the interval between the periodic IPX RIP broadcasts from this interface"
|
||
DEFVAL { 60 }
|
||
::= {ipxInterfaceEntry 12}
|
||
|
||
ipxInterfacePeriodicSAPEnabled OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Determines whether the node will originate periodic IPX SAP messages
|
||
from this interface to inform the network which SAP entries in the routing table are viable"
|
||
DEFVAL { no }
|
||
::= {ipxInterfaceEntry 13}
|
||
|
||
ipxInterfacePeriodicSAPTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (1..65535)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The interval between the periodic SAP broadcasts from this interface"
|
||
DEFVAL { 60 }
|
||
::= {ipxInterfaceEntry 14}
|
||
|
||
ipxInterfaceRIPEnabled OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{ no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Datermines whether this interface will support RIP proceswsing "
|
||
DEFVAL { no }
|
||
::= {ipxInterfaceEntry 15}
|
||
|
||
ipxInterfaceRIPAgeTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (0..65535)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "This is used to delete route entries in the routing information table. The timer starts/restarts
|
||
each time an entry is created/updated. If the timer expires, the router will assume that the entry is no
|
||
longer valid and the entry will be deleteda from the table "
|
||
DEFVAL { 180 }
|
||
::= {ipxInterfaceEntry 16}
|
||
|
||
ipxInterfaceRIPMaxSize OBJECT-TYPE
|
||
SYNTAX INTEGER (54..446)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Maximum possible RIP packet size "
|
||
DEFVAL { 446 }
|
||
::= {ipxInterfaceEntry 17}
|
||
|
||
ipxInterfaceSAPEnabled OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{ no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Determines whether the interface will support SAP or not "
|
||
DEFVAL { no }
|
||
::= {ipxInterfaceEntry 18}
|
||
|
||
ipxInterfaceSAPAgeTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (0..65535)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "This is used to delete route entries from the router information table. The timer starts/restars
|
||
each time an entry is created/updated. If the timer expires, the router will assume that the entry is no
|
||
longer valid and the entry will be deleted from the table "
|
||
DEFVAL { 180 }
|
||
::= {ipxInterfaceEntry 19}
|
||
|
||
ipxInterfaceTransportTime OBJECT-TYPE
|
||
SYNTAX INTEGER (1..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "is the time (in 55 milliseconds unit) that will normally take to forward frames out of interface.
|
||
Recommmended values are 1 for LAN interfaces and 30 for WAN interfaces. A value of 0 indicates that the
|
||
back to back frame forwarding is acceptable. This time is used to calculate the least cost path during
|
||
routing. If IPXWAMN is (Y), Transport time will be overridden by the value calculated by IPXWAN "
|
||
DEFVAL { 1 }
|
||
::= {ipxInterfaceEntry 20}
|
||
|
||
ipxInterfaceSerializationEnabled OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{ no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Determines whether NetWare file server serialization security frames will be
|
||
forwarded on the interface. These broadcasts frames are used by Novell to hold informations regarding the
|
||
licensing of the file server executables "
|
||
DEFVAL { no }
|
||
::= {ipxInterfaceEntry 21}
|
||
|
||
ipxInterfaceWatchdogSpoofingEnabled OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{ no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Determines whether this interface will be used by the local node to respond to (keep alive) messages on
|
||
behalf of the client workstations. Novell servers periodically issue these messages to all clients
|
||
to determine whether each client is still alive "
|
||
DEFVAL { no }
|
||
::= {ipxInterfaceEntry 22}
|
||
|
||
ipxInterfaceLanCardNumber OBJECT-TYPE
|
||
SYNTAX INTEGER (0..1)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The card number installed in an FRX6000. The first or only LAN card installed is always 0,
|
||
and the second is card 1"
|
||
DEFVAL { 0 }
|
||
::= {ipxInterfaceEntry 23}
|
||
|
||
ipxInterfaceWanEnabled OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{ no(1),
|
||
yes(2),
|
||
not-applicable(3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Determines whether Novell's IPXWAN protocol will be used on the interface. IPXWAN specifies a method
|
||
for IPX routers to communicate across WAN links. FRX6000 and FRX4000 implement IPXWAN running over RFC
|
||
1490-complaint frame relay and RFC1356-complaint X.25"
|
||
DEFVAL { no }
|
||
::= {ipxInterfaceEntry 24}
|
||
|
||
ipxInterfaceSourceSubscriber OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..15))
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Subscruber id that defines an IPX interface in the node, by associating itself with port 66 (a
|
||
number reserved for the IPXinterface) on the RLP that has an IPX installed on it.
|
||
.. Valid only for type X.25 "
|
||
::= {ipxInterfaceEntry 25}
|
||
|
||
ipxInterfaceDestinationSubscriber OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..15))
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Subscriber ID associated with the physical X.25 port that will be used for the IPX interface .
|
||
.. Valid only for type X.25 "
|
||
::= {ipxInterfaceEntry 26}
|
||
|
||
ipxInterfaceSVCRetryTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (5..60)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The frequency with which calls will be placed to try to establish a connection
|
||
.. Valid only for type X.25 "
|
||
DEFVAL { 20 }
|
||
::= {ipxInterfaceEntry 27}
|
||
|
||
ipxInterfaceSVCIdleTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (0..5)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "is a period that an IPX connection can remain active with no traffic before the connection is cleared.
|
||
.. Valid only for type X.25 "
|
||
DEFVAL { 1 }
|
||
::= {ipxInterfaceEntry 28}
|
||
|
||
ipxInterfaceMaxVC OBJECT-TYPE
|
||
SYNTAX INTEGER (1..8)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "This specifies a number of virtual circuits over which IPX traffic will be transmitted in parallel.
|
||
.. Valid only for type X.25 "
|
||
DEFVAL { 1 }
|
||
::= {ipxInterfaceEntry 29 }
|
||
|
||
ipxInterfacePVCConnection OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{ no(1),
|
||
yes(2),
|
||
not-applicable(3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Identifies this interface as one of a PVC.
|
||
.. Valid only for type X.25 "
|
||
DEFVAL { no }
|
||
::= {ipxInterfaceEntry 30}
|
||
|
||
ipxInterfaceSourceCard OBJECT-TYPE
|
||
SYNTAX INTEGER (0..7)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Identifies the location of this end of the frame relay IPX interface.
|
||
.. Valid only for frame relay "
|
||
DEFVAL { 0 }
|
||
::= {ipxInterfaceEntry 31}
|
||
|
||
ipxInterfaceSourcePort OBJECT-TYPE
|
||
SYNTAX INTEGER (0..7)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Identifies the location of this end of the frame relay IPX interface.
|
||
.. Valid only for frame relay "
|
||
DEFVAL { 0 }
|
||
::= {ipxInterfaceEntry 32}
|
||
|
||
ipxInterfaceSourceDLCI OBJECT-TYPE
|
||
SYNTAX INTEGER (16..991)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Identifies the location of this end of the frame relay IPX interface.
|
||
.. Valid only for frame relay "
|
||
DEFVAL { 16 }
|
||
::= {ipxInterfaceEntry 33}
|
||
|
||
ipxInterfaceRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the ipxInterfaceTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= {ipxInterfaceEntry 34}
|
||
|
||
-- The Node Default Group
|
||
|
||
ipxConfigNodeDefault OBJECT IDENTIFIER ::= {ipxConfig 3}
|
||
|
||
ipxNodeDefaultConfigNetworkAddress OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Identifies the node to the IPX network"
|
||
::= {ipxConfigNodeDefault 1}
|
||
|
||
ipxNodeDefaultConfigRIPSAPGap OBJECT-TYPE
|
||
SYNTAX INTEGER (0..100)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The minimum delay between consecutive RIP and SAP transmissions"
|
||
::= {ipxConfigNodeDefault 2}
|
||
|
||
ipxNodeDefaultConfigRouterName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..48))
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "An unique identifier within the IPX network"
|
||
::= {ipxConfigNodeDefault 3}
|
||
|
||
--
|
||
-- The Netlink IP Interface Table
|
||
--
|
||
|
||
nlIfIpInterfaces OBJECT IDENTIFIER ::= { nlInterfaces 4}
|
||
|
||
nlIfIpTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF NlIfIpEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to define IP interfaces over frame relay,
|
||
X.25, or LAN (ethernet, 802.3, 802.5)."
|
||
::= { nlIfIpInterfaces 1 }
|
||
|
||
nlIfIpEntry OBJECT-TYPE
|
||
SYNTAX NlIfIpEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "An IP Interface entry containing objects relating
|
||
to IP interfaces."
|
||
INDEX { nlIfIpInterface }
|
||
::= { nlIfIpTable 1 }
|
||
|
||
NlIfIpEntry ::=
|
||
SEQUENCE {
|
||
nlIfIpInterface INTEGER,
|
||
nlIfIpMtu INTEGER,
|
||
nlIfIpNetworkMask IpAddress,
|
||
nlIfIpRouteMetric INTEGER,
|
||
nlIfIpICMPAddRoutes INTEGER,
|
||
nlIfIpRIPDeltaUpdates INTEGER,
|
||
nlIfIpRIPFullUpdates INTEGER,
|
||
nlIfIpPriority INTEGER,
|
||
nlIfIpBAG INTEGER,
|
||
nlIfIpType INTEGER,
|
||
nlIfIpSourceAddress IpAddress,
|
||
nlIfIpDestAddress IpAddress,
|
||
nlIfIpBroadcastAddress IpAddress,
|
||
nlIfIpLANCard INTEGER,
|
||
nlIfIpSourceSub NlSubscriberAddress,
|
||
nlIfIpDestSub NlSubscriberAddress,
|
||
nlIfIpSVCRetryTimer INTEGER,
|
||
nlIfIpSVCIdleTimer INTEGER,
|
||
nlIfIpMaxSVC INTEGER,
|
||
nlIfIpPVCConnection INTEGER,
|
||
nlIfIpSourceRlp INTEGER,
|
||
nlIfIpSourcePort INTEGER,
|
||
nlIfIpSourceDLCI INTEGER,
|
||
nlIfIpRIPSupport INTEGER,
|
||
nlIfIpInverseARP INTEGER,
|
||
nlIfIpProxyARP INTEGER,
|
||
nlIfIpUnnumberedIf INTEGER,
|
||
nlIfIpRowStatus RowStatus
|
||
}
|
||
|
||
nlIfIpInterface OBJECT-TYPE
|
||
SYNTAX INTEGER (1..257)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The interface number which uniquely identifies the
|
||
interface to which this entry is applicable. The
|
||
interface identified by a particular value of this
|
||
number is NOT the same interface as defined by the
|
||
same value of ifIndex."
|
||
::= { nlIfIpEntry 1 }
|
||
|
||
nlIfIpMtu OBJECT-TYPE
|
||
SYNTAX INTEGER (1..4096)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The maximum size (in bytes) of the data field that can
|
||
be used to encapsulate an IP datagram for transmission
|
||
over the interface. If the interface type is LAN based,
|
||
then the maximum size value cannot exceed 1500."
|
||
DEFVAL { 4096 }
|
||
::= { nlIfIpEntry 2 }
|
||
|
||
nlIfIpNetworkMask OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The mask used during routing to determine the portion
|
||
of the address associated with the network."
|
||
DEFVAL { 'FF000000'H } -- 255.0.0.0
|
||
::= { nlIfIpEntry 3 }
|
||
|
||
nlIfIpRouteMetric OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of network hops (network gateways in the
|
||
overall path over the internet) associated with this
|
||
interface."
|
||
DEFVAL { 0 }
|
||
::= { nlIfIpEntry 4 }
|
||
|
||
nlIfIpICMPAddRoutes OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The flag which indicates whether IP may add routes
|
||
obtained by ICMP, whose error and control function
|
||
is used to send re-direction options back to the
|
||
source if problems are discovered."
|
||
DEFVAL { yes }
|
||
::= { nlIfIpEntry 5 }
|
||
|
||
nlIfIpRIPDeltaUpdates OBJECT-TYPE
|
||
SYNTAX INTEGER (10..300)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The frequency with which RIP messages will be sent to
|
||
every neighbor node, containing any changes to the
|
||
routing table that occurred since the last full update."
|
||
DEFVAL { 30 }
|
||
::= { nlIfIpEntry 6 }
|
||
|
||
nlIfIpRIPFullUpdates OBJECT-TYPE
|
||
SYNTAX INTEGER (10..300)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The frequency with which updates of the entire routing
|
||
table will be sent to every neighbor node, via one or
|
||
more RIP messages."
|
||
DEFVAL { 60 }
|
||
::= { nlIfIpEntry 7 }
|
||
|
||
nlIfIpPriority OBJECT-TYPE
|
||
SYNTAX INTEGER (0..9)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The priority setting for traffic within the node. The
|
||
higher the number, the higher the priority relative to
|
||
other intra-nodal traffic."
|
||
DEFVAL { 5 }
|
||
::= { nlIfIpEntry 8 }
|
||
|
||
nlIfIpBAG OBJECT-TYPE
|
||
SYNTAX INTEGER (1..16)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The bandwidth allocation group to which this interface
|
||
is assigned to. This object is only valid when the
|
||
interface type is frame relay or proprietary virtual."
|
||
DEFVAL { 1 }
|
||
::= { nlIfIpEntry 9 }
|
||
|
||
nlIfIpType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
other(1), -- none of the following
|
||
rfc877x25(5),
|
||
ethernetCsmacd(6),
|
||
iso88023Csmacd(7),
|
||
iso88025TokenRing(9),
|
||
frameRelay(32), -- DTE only
|
||
propVirtual(53) -- proprietary virtual/internal
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The type of IP interface."
|
||
DEFVAL { rfc877x25 }
|
||
::= { nlIfIpEntry 10 }
|
||
|
||
nlIfIpSourceAddress OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The IP address of the end-to-end sender."
|
||
DEFVAL { '00000000'H } -- 0.0.0.0
|
||
::= { nlIfIpEntry 11 }
|
||
|
||
nlIfIpDestAddress OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The IP address of the end-to-end receiver. This object
|
||
is only valid when the interface type is X.25 or proprietary
|
||
virtual, or when the interface type is frame relay and the
|
||
inverse ARP flag indicates disabled."
|
||
DEFVAL { '00000000'H } -- 0.0.0.0
|
||
::= { nlIfIpEntry 12 }
|
||
|
||
nlIfIpBroadcastAddress OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The IP address that is used to send to all LAN hosts
|
||
on the network. This object is only valid when the
|
||
interface type is LAN based."
|
||
DEFVAL { '00000000'H } -- 0.0.0.0
|
||
::= { nlIfIpEntry 13 }
|
||
|
||
nlIfIpLANCard OBJECT-TYPE
|
||
SYNTAX INTEGER (0..1)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The LAN card that contains the interface. This object
|
||
is only valid when the interface type is LAN based."
|
||
DEFVAL { 0 }
|
||
::= { nlIfIpEntry 14 }
|
||
|
||
nlIfIpSourceSub OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The subscriber ID associated with the source IP
|
||
interface port. This object is only valid when the
|
||
interface type is X.25."
|
||
::= { nlIfIpEntry 15 }
|
||
|
||
nlIfIpDestSub OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The subscriber ID associated with the destination IP
|
||
interface port. This object is only valid when the
|
||
interface type is X.25."
|
||
::= { nlIfIpEntry 16 }
|
||
|
||
nlIfIpSVCRetryTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (5..60)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The frequency with which calls will be placed to try
|
||
to establish a connection. This object is only valid
|
||
when the interface type is X.25."
|
||
DEFVAL { 20 }
|
||
::= { nlIfIpEntry 17 }
|
||
|
||
nlIfIpSVCIdleTimer OBJECT-TYPE
|
||
SYNTAX INTEGER (0..5)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The period that an IP connection remains active with
|
||
no traffic before the connection is cleared. This object
|
||
is only valid when the interface type is X.25."
|
||
DEFVAL { 1 }
|
||
::= { nlIfIpEntry 18 }
|
||
|
||
nlIfIpMaxSVC OBJECT-TYPE
|
||
SYNTAX INTEGER (1..8)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of virtual circuits over which IP traffic
|
||
will be transmitted in parallel. This object is only
|
||
valid when the interface type is X.25."
|
||
DEFVAL { 1 }
|
||
::= { nlIfIpEntry 19 }
|
||
|
||
nlIfIpPVCConnection OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The flag which indicates whether this interface is a
|
||
PVC. This object is only valid when the interface type
|
||
is X.25."
|
||
DEFVAL { no }
|
||
::= { nlIfIpEntry 20 }
|
||
|
||
nlIfIpSourceRlp OBJECT-TYPE
|
||
SYNTAX INTEGER (1..8)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP of the logical interface of this end of the frame
|
||
relay link. This object is only valid when the interface
|
||
type is frame relay."
|
||
DEFVAL { 1 }
|
||
::= { nlIfIpEntry 21 }
|
||
|
||
nlIfIpSourcePort OBJECT-TYPE
|
||
SYNTAX INTEGER (1..8)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The port of the logical interface of this end of the frame
|
||
relay link. This object is only valid when the interface
|
||
type is frame relay."
|
||
DEFVAL { 1 }
|
||
::= { nlIfIpEntry 22 }
|
||
|
||
nlIfIpSourceDLCI OBJECT-TYPE
|
||
SYNTAX INTEGER (16..991)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The DLCI of the logical interface of this end of the frame
|
||
relay link. This object is only valid when the interface
|
||
type is frame relay."
|
||
DEFVAL { 16 }
|
||
::= { nlIfIpEntry 23 }
|
||
|
||
nlIfIpRIPSupport OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled(1),
|
||
enabled(2),
|
||
receive-only(3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The RIP support that is being run on the interface."
|
||
DEFVAL { enabled }
|
||
::= { nlIfIpEntry 24 }
|
||
|
||
nlIfIpInverseARP OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled(1),
|
||
enabled(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The flag which indicates whether inverse ARP is enabled
|
||
or disabled. This object is only valid when the interface
|
||
type is frame relay."
|
||
DEFVAL { disabled }
|
||
::= { nlIfIpEntry 25 }
|
||
|
||
nlIfIpProxyARP OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled(1),
|
||
enabled(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The flag which indicates whether proxy ARP is enabled
|
||
or disabled. This object is only valid when the interface
|
||
type is LAN based."
|
||
DEFVAL { disabled }
|
||
::= { nlIfIpEntry 26 }
|
||
|
||
nlIfIpUnnumberedIf OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The flag which indicates whether this interface is an
|
||
unnumbered interface (i.e., does not require a specific
|
||
source IP address). This object is only valid when the
|
||
interface type is frame relay or X.25."
|
||
DEFVAL { yes }
|
||
::= { nlIfIpEntry 27 }
|
||
|
||
nlIfIpRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the nlIfIpTable and follows the SNMPv2
|
||
RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { nlIfIpEntry 28 }
|
||
|
||
--
|
||
-- The Netlink IP Interface Secondary Addresses Table
|
||
--
|
||
|
||
nlIfIpSecondaryAddrTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF NlIfIpSecondaryAddrEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to define secondary IP interfaces on a
|
||
LAN (ethernet, 802.3, 802.5) interface."
|
||
::= { nlIfIpInterfaces 2 }
|
||
|
||
nlIfIpSecondaryAddrEntry OBJECT-TYPE
|
||
SYNTAX NlIfIpSecondaryAddrEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "An IP Secondary Address entry containing objects relating
|
||
to IP secondary addresses."
|
||
INDEX { nlIfIpInterface, nlIfIpSecondaryAddrSequence }
|
||
::= { nlIfIpSecondaryAddrTable 1 }
|
||
|
||
NlIfIpSecondaryAddrEntry ::=
|
||
SEQUENCE {
|
||
nlIfIpSecondaryAddrSequence INTEGER,
|
||
nlIfIpSecondaryAddrNetworkMask IpAddress,
|
||
nlIfIpSecondaryAddrRouteMetric INTEGER,
|
||
nlIfIpSecondaryAddrSourceAddress IpAddress,
|
||
nlIfIpSecondaryAddrBroadcastAddress IpAddress,
|
||
nlIfIpSecondaryAddrRIPSupport INTEGER,
|
||
nlIfIpSecondaryAddrRowStatus RowStatus
|
||
}
|
||
|
||
nlIfIpSecondaryAddrSequence OBJECT-TYPE
|
||
SYNTAX INTEGER (1..15)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The maximum number of secondary IP addresses that may
|
||
be configured on an interface."
|
||
::= { nlIfIpSecondaryAddrEntry 1 }
|
||
|
||
nlIfIpSecondaryAddrNetworkMask OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The mask used during routing to determine the portion
|
||
of the address associated with the network."
|
||
DEFVAL { '00000000'H } -- 0.0.0.0
|
||
::= { nlIfIpSecondaryAddrEntry 2 }
|
||
|
||
nlIfIpSecondaryAddrRouteMetric OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of network hops (network gateways in the
|
||
overall path over the internet) associated with this
|
||
interface."
|
||
DEFVAL { 0 }
|
||
::= { nlIfIpSecondaryAddrEntry 3 }
|
||
|
||
nlIfIpSecondaryAddrSourceAddress OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The IP address of the end-to-end sender."
|
||
DEFVAL { '00000000'H } -- 0.0.0.0
|
||
::= { nlIfIpSecondaryAddrEntry 4 }
|
||
|
||
nlIfIpSecondaryAddrBroadcastAddress OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The IP address that is used to send to all LAN hosts
|
||
on the network."
|
||
DEFVAL { '00000000'H } -- 0.0.0.0
|
||
::= { nlIfIpSecondaryAddrEntry 5 }
|
||
|
||
nlIfIpSecondaryAddrRIPSupport OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled(1),
|
||
enabled(2),
|
||
receive-only(3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The RIP support that is being run on the interface."
|
||
DEFVAL { enabled }
|
||
::= { nlIfIpSecondaryAddrEntry 6 }
|
||
|
||
nlIfIpSecondaryAddrRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion of
|
||
conceptual rows in the nlIfIpSecondaryAddrTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { nlIfIpSecondaryAddrEntry 7 }
|
||
|
||
nlIfVoiceInterfaces OBJECT IDENTIFIER ::= { nlInterfaces 5}
|
||
|
||
--
|
||
-- The Netlink Voice Interface Table
|
||
--
|
||
|
||
nlIfVoiceTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF NlIfVoiceEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to define Voice interfaces over frame relay."
|
||
::= { nlIfVoiceInterfaces 1 }
|
||
|
||
nlIfVoiceEntry OBJECT-TYPE
|
||
SYNTAX NlIfVoiceEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A Voice Interface entry containing objects relating
|
||
to the interface that are configurable by the user."
|
||
INDEX { nlIfVoiceInterface }
|
||
::= { nlIfVoiceTable 1 }
|
||
|
||
NlIfVoiceEntry ::=
|
||
SEQUENCE {
|
||
nlIfVoiceInterface INTEGER,
|
||
nlIfVoicePeerNodeType INTEGER,
|
||
nlIfVoicePeerNodeNumber INTEGER,
|
||
nlIfVoicePeerNodePort INTEGER,
|
||
nlIfVoiceLocalNodeNumber INTEGER,
|
||
nlIfVoiceLocalNodePort INTEGER,
|
||
nlIfVoiceFrameRelayRlp INTEGER,
|
||
nlIfVoiceFrameRelayPort INTEGER,
|
||
nlIfVoiceFrameRelayDLCI INTEGER,
|
||
nlIfVoiceEnableFragment INTEGER,
|
||
nlIfVoiceRowStatus RowStatus
|
||
}
|
||
|
||
nlIfVoiceInterface OBJECT-TYPE
|
||
SYNTAX INTEGER (1..129)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The interface number which uniquely identifies the
|
||
interface to which this entry is applicable. The
|
||
interface identified by a particular value of this
|
||
number is NOT the same interface as defined by the
|
||
same value of ifIndex."
|
||
::= { nlIfVoiceEntry 1 }
|
||
|
||
nlIfVoicePeerNodeType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
netlink (1),
|
||
act (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The node type for the node at the remote end of the
|
||
frame relay connection."
|
||
DEFVAL { act }
|
||
::= { nlIfVoiceEntry 2 }
|
||
|
||
nlIfVoicePeerNodeNumber OBJECT-TYPE
|
||
SYNTAX INTEGER (1..61)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The node number of the remote device."
|
||
DEFVAL { 1 }
|
||
::= { nlIfVoiceEntry 3 }
|
||
|
||
nlIfVoicePeerNodePort OBJECT-TYPE
|
||
SYNTAX INTEGER (1..17)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The voice port on the remote device."
|
||
DEFVAL { 1 }
|
||
::= { nlIfVoiceEntry 4 }
|
||
|
||
nlIfVoiceLocalNodeNumber OBJECT-TYPE
|
||
SYNTAX INTEGER (1..61)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The node number of the local device."
|
||
DEFVAL { 1 }
|
||
::= { nlIfVoiceEntry 5 }
|
||
|
||
nlIfVoiceLocalNodePort OBJECT-TYPE
|
||
SYNTAX INTEGER (1..17)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The voice port on the local device."
|
||
DEFVAL { 1 }
|
||
::= { nlIfVoiceEntry 6 }
|
||
|
||
nlIfVoiceFrameRelayRlp OBJECT-TYPE
|
||
SYNTAX INTEGER (1..8)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP of the logical interface of this end of the frame
|
||
relay link."
|
||
DEFVAL { 1 }
|
||
::= { nlIfVoiceEntry 7 }
|
||
|
||
nlIfVoiceFrameRelayPort OBJECT-TYPE
|
||
SYNTAX INTEGER (1..8)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The port of the logical interface of this end of the frame
|
||
relay link."
|
||
DEFVAL { 1 }
|
||
::= { nlIfVoiceEntry 8 }
|
||
|
||
nlIfVoiceFrameRelayDLCI OBJECT-TYPE
|
||
SYNTAX INTEGER (16..991)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The DLCI of the logical interface of this end of the frame
|
||
relay link."
|
||
DEFVAL { 16 }
|
||
::= { nlIfVoiceEntry 9 }
|
||
|
||
nlIfVoiceEnableFragment OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION ""
|
||
DEFVAL { no }
|
||
::= { nlIfVoiceEntry 10 }
|
||
|
||
nlIfVoiceRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the noIfVoiceTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { nlIfVoiceEntry 11 }
|
||
|
||
-- **************************
|
||
-- * THE SUBSCRIBER GROUP *
|
||
-- **************************
|
||
|
||
subscriber OBJECT IDENTIFIER ::= { local 5 }
|
||
|
||
--
|
||
-- The Netlink Local Subscriber Table
|
||
--
|
||
|
||
nlLocalSubscriberTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF NlLocalSubscriberEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to define each local subscriber."
|
||
::= { subscriber 1 }
|
||
|
||
nlLocalSubscriberEntry OBJECT-TYPE
|
||
SYNTAX NlLocalSubscriberEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Local Subscriber entry containing objects relating
|
||
to local subscribers."
|
||
INDEX { nlLocalSubscriberId }
|
||
::= { nlLocalSubscriberTable 1 }
|
||
|
||
NlLocalSubscriberEntry ::=
|
||
SEQUENCE {
|
||
nlLocalSubscriberId NlSubscriberAddress,
|
||
nlLocalSubscriberName DisplayString,
|
||
nlLocalSubscriberAlgorithm INTEGER,
|
||
nlLocalSubscriberSystematicRedirect INTEGER,
|
||
nlLocalSubscriberRedirectBusy INTEGER,
|
||
nlLocalSubscriberRedirectOO INTEGER,
|
||
nlLocalSubscriberPriority INTEGER,
|
||
nlLocalSubscriberRowStatus RowStatus
|
||
}
|
||
|
||
nlLocalSubscriberId OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Subscriber ID. A valid subscriber ID is a string of
|
||
numeric digits represented by their ASCII equivalents. The
|
||
ASCII equivalents of the wildcard characters '*' and '?' are
|
||
also allowed. A '*' is a wildcard that matches any number of
|
||
digits, including zero. A '?' is a wildcard that matches any single digit."
|
||
::= { nlLocalSubscriberEntry 1 }
|
||
|
||
nlLocalSubscriberName OBJECT-TYPE
|
||
SYNTAX DisplayString (SIZE (0..31))
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Subscriber name. The subscriber name is not accessible from
|
||
SNMP, and a blank string is always returned."
|
||
::= { nlLocalSubscriberEntry 2 }
|
||
|
||
nlLocalSubscriberAlgorithm OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
round-robin(1),
|
||
line-failed(2),
|
||
line-busy(3),
|
||
least-lcn(4)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The Subscriber routing algorithm.
|
||
The following 4 types of routing algorithms are supported.
|
||
1 - round robin selects ports specified cyclicly in numerical
|
||
order according to the list of Redirection addresses. If the port
|
||
is unreachable or congested, the call request is sent to the next
|
||
port.
|
||
2. Alternate Route on Line Failure - selects the first port
|
||
not in a failed state. If a connection is not made, the call
|
||
will be cleared even if other ports are available.
|
||
3. Alternate Route on Line Busy - selects the first port
|
||
that has LCN's available (not busy). If a port has failed,
|
||
the next available port is selected.
|
||
4. Least LCN with throughput selects the line with the minumum
|
||
loading, calculated by weight and number of LCN's in use.
|
||
|
||
If use of a routing algorithm is not desired, accept the default
|
||
and specify only one routing path."
|
||
DEFVAL { round-robin }
|
||
::= { nlLocalSubscriberEntry 3 }
|
||
|
||
nlLocalSubscriberSystematicRedirect OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Systematic Redirection."
|
||
DEFVAL { no }
|
||
::= { nlLocalSubscriberEntry 4 }
|
||
|
||
nlLocalSubscriberRedirectBusy OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Redirect calls according to Redirection Addresses if the
|
||
primary subscriber device is busy."
|
||
DEFVAL { no }
|
||
::= { nlLocalSubscriberEntry 5 }
|
||
|
||
nlLocalSubscriberRedirectOO OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Redirect calls according to Redirection Addresses if the
|
||
primary subscriber device is out of order."
|
||
DEFVAL { no }
|
||
::= { nlLocalSubscriberEntry 6 }
|
||
|
||
nlLocalSubscriberPriority OBJECT-TYPE
|
||
SYNTAX INTEGER (0..9)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Allows setting a priority for traffic within the node."
|
||
DEFVAL { 0 }
|
||
::= { nlLocalSubscriberEntry 7 }
|
||
|
||
nlLocalSubscriberRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the nlLocalSubscriberTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
|
||
::= { nlLocalSubscriberEntry 8 }
|
||
|
||
-- Routing Paths Table.
|
||
|
||
nlLocalSubscriberRouteTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF NlLocalSubscriberRouteEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to define local subscriber route paths."
|
||
::= { subscriber 2 }
|
||
|
||
nlLocalSubscriberRouteEntry OBJECT-TYPE
|
||
SYNTAX NlLocalSubscriberRouteEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Local Subscriber Route entry containing objects relating
|
||
to local subscriber routes."
|
||
INDEX { nlLocalSubscriberId, nlLocalSubscriberRouteIndex}
|
||
::= { nlLocalSubscriberRouteTable 1 }
|
||
|
||
NlLocalSubscriberRouteEntry ::=
|
||
SEQUENCE {
|
||
nlLocalSubscriberRouteIndex INTEGER,
|
||
nlLocalSubscriberRouteConf INTEGER,
|
||
nlLocalSubscriberRouteLP INTEGER,
|
||
nlLocalSubscriberRoutePort INTEGER,
|
||
nlLocalSubscriberRouteRowStatus RowStatus
|
||
}
|
||
|
||
nlLocalSubscriberRouteIndex OBJECT-TYPE
|
||
SYNTAX INTEGER (1..8)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Route path index for a specific subscriber route path."
|
||
::= { nlLocalSubscriberRouteEntry 1 }
|
||
|
||
nlLocalSubscriberRouteConf OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no(1),
|
||
yes(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Flag to indicate if the LP/port routing path to the
|
||
subscriber device is configured or not. This object is read-
|
||
only. The route is always configured for an entry in the table."
|
||
::= { nlLocalSubscriberRouteEntry 2 }
|
||
|
||
nlLocalSubscriberRouteLP OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Instance of the LP that makes up the routing path"
|
||
::= { nlLocalSubscriberRouteEntry 3 }
|
||
|
||
nlLocalSubscriberRoutePort OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Instance of the port that makes up the routing path"
|
||
::= { nlLocalSubscriberRouteEntry 4 }
|
||
|
||
nlLocalSubscriberRouteRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the nlLocalSubscriberRouteTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
|
||
::= { nlLocalSubscriberRouteEntry 5 }
|
||
|
||
--- Redirection Address table.
|
||
|
||
nlLocalSubscriberRedirTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF NlLocalSubscriberRedirEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to list local subscriber redirection addresses."
|
||
::= { subscriber 3 }
|
||
|
||
nlLocalSubscriberRedirEntry OBJECT-TYPE
|
||
SYNTAX NlLocalSubscriberRedirEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Local Subscriber Redirection Address entry containing
|
||
objects relating to local subscriber redirection addresses."
|
||
INDEX { nlLocalSubscriberId, nlLocalSubscriberRedirIndex }
|
||
::= { nlLocalSubscriberRedirTable 1 }
|
||
|
||
NlLocalSubscriberRedirEntry ::=
|
||
SEQUENCE {
|
||
nlLocalSubscriberRedirIndex INTEGER,
|
||
nlLocalSubscriberRedirAddr NlSubscriberAddress,
|
||
nlLocalSubscriberRedirRowStatus RowStatus
|
||
}
|
||
|
||
nlLocalSubscriberRedirIndex OBJECT-TYPE
|
||
SYNTAX INTEGER (1..5)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Redirection entry index for a local subscriber."
|
||
::= { nlLocalSubscriberRedirEntry 1 }
|
||
|
||
nlLocalSubscriberRedirAddr OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Subscriber redirection address."
|
||
::= { nlLocalSubscriberRedirEntry 2 }
|
||
|
||
nlLocalSubscriberRedirRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the nlLocalSubscriberRedirTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { nlLocalSubscriberRedirEntry 3 }
|
||
|
||
-- ********************
|
||
-- * THE LLC2 GROUP *
|
||
-- ********************
|
||
|
||
llc2 OBJECT IDENTIFIER ::= { local 6 }
|
||
|
||
--
|
||
-- The Netlink LLC2 Host Table
|
||
--
|
||
|
||
nlLlc2HostTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF NlLlc2HostEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to define LLC2 host entries."
|
||
::= { llc2 1 }
|
||
|
||
nlLlc2HostEntry OBJECT-TYPE
|
||
SYNTAX NlLlc2HostEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "An LLC2 Host entry containing objects relating to
|
||
LLC2 hosts."
|
||
INDEX { nlLlc2HostGroup, nlLlc2HostIndex }
|
||
::= { nlLlc2HostTable 1 }
|
||
|
||
NlLlc2HostEntry ::=
|
||
SEQUENCE {
|
||
nlLlc2HostIndex INTEGER,
|
||
nlLlc2HostMACAddress MacAddress,
|
||
nlLlc2HostSessionType INTEGER,
|
||
nlLlc2HostT1ReplyTimer TimeInterval,
|
||
nlLlc2HostT2RecvAckTimer TimeInterval,
|
||
nlLlc2HostTiInactivityTimer TimeInterval,
|
||
nlLlc2HostN3NumberLPDUs INTEGER,
|
||
nlLlc2HostTwNumberOutstanding INTEGER,
|
||
nlLlc2HostN2ExpiredT1LPDUCount INTEGER,
|
||
nlLlc2HostPriority INTEGER,
|
||
nlLlc2HostBAG INTEGER,
|
||
nlLlc2HostRoutingSubscriberId NlSubscriberAddress,
|
||
nlLlc2HostSrcMACAddressMask MacAddress,
|
||
nlLlc2HostAccess INTEGER,
|
||
nlLlc2HostRowStatus RowStatus,
|
||
nlLlc2HostInterface INTEGER,
|
||
nlLlc2HostGroup INTEGER
|
||
}
|
||
|
||
nlLlc2HostIndex OBJECT-TYPE
|
||
SYNTAX INTEGER (1..251)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "LLC2 Host Index"
|
||
::= { nlLlc2HostEntry 1 }
|
||
|
||
nlLlc2HostMACAddress OBJECT-TYPE
|
||
SYNTAX MacAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The LLC2 Host MAC Address."
|
||
DEFVAL { '400000000001'H } -- 40:00:00:00:00:01
|
||
::= { nlLlc2HostEntry 2 }
|
||
|
||
nlLlc2HostSessionType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
originated(1),
|
||
terminated(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The mode in which the Host is operating"
|
||
DEFVAL { terminated }
|
||
::= { nlLlc2HostEntry 3 }
|
||
|
||
nlLlc2HostT1ReplyTimer OBJECT-TYPE
|
||
SYNTAX TimeInterval (1..250)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Reply Timer used to detect a failure of the Remote node."
|
||
DEFVAL { 10 }
|
||
::= { nlLlc2HostEntry 4 }
|
||
|
||
nlLlc2HostT2RecvAckTimer OBJECT-TYPE
|
||
SYNTAX TimeInterval (100..5000)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Receive Ack Timer used to delay sending an
|
||
acknowledgement of a received information LPDU."
|
||
DEFVAL { 100 }
|
||
::= { nlLlc2HostEntry 5 }
|
||
|
||
nlLlc2HostTiInactivityTimer OBJECT-TYPE
|
||
SYNTAX TimeInterval (1..50)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Timer used to detect inoperative condition of the
|
||
remote link station or transmission medium."
|
||
DEFVAL { 30 }
|
||
::= { nlLlc2HostEntry 6 }
|
||
|
||
nlLlc2HostN3NumberLPDUs OBJECT-TYPE
|
||
SYNTAX INTEGER (1..127)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of Information LPDUs that need to be received
|
||
before an acknowledgement is sent."
|
||
DEFVAL { 3 }
|
||
::= { nlLlc2HostEntry 7 }
|
||
|
||
nlLlc2HostTwNumberOutstanding OBJECT-TYPE
|
||
SYNTAX INTEGER (1..127)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Maximum number of sequentially numbered information
|
||
LPDUs that can be outstanding at any time."
|
||
DEFVAL { 7 }
|
||
::= { nlLlc2HostEntry 8 }
|
||
|
||
nlLlc2HostN2ExpiredT1LPDUCount OBJECT-TYPE
|
||
SYNTAX INTEGER (0..255)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Maximum number of LPDU retransmissions occur following
|
||
the expiration of Timer T1."
|
||
DEFVAL { 8 }
|
||
::= { nlLlc2HostEntry 9 }
|
||
|
||
nlLlc2HostPriority OBJECT-TYPE
|
||
SYNTAX INTEGER (0..9)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Traffic priorities within the node."
|
||
DEFVAL { 0 }
|
||
::= { nlLlc2HostEntry 10 }
|
||
|
||
nlLlc2HostBAG OBJECT-TYPE
|
||
SYNTAX INTEGER (1..16)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Bandwidth Allocation group to which the LLC2 Host belongs.
|
||
This object is read-only. Bandwidth allocation groups do not apply
|
||
to LLC2 hosts."
|
||
DEFVAL { 1 }
|
||
::= { nlLlc2HostEntry 11 }
|
||
|
||
nlLlc2HostRoutingSubscriberId OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "LLC2 hosts Routing Subscriber Id"
|
||
::= { nlLlc2HostEntry 12 }
|
||
|
||
nlLlc2HostSrcMACAddressMask OBJECT-TYPE
|
||
SYNTAX MacAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "LLC2 Host's Source MAC Address Mask"
|
||
DEFVAL { '000000000000'H } -- 00:00:00:00:00:00
|
||
::= { nlLlc2HostEntry 13 }
|
||
|
||
nlLlc2HostAccess OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
lan(1),
|
||
frameRelay(2),
|
||
tokenRing(3),
|
||
ethernet(4),
|
||
all(5),
|
||
not-applicable(6)
|
||
}
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies different type(s) of interface(s) that can be
|
||
used for connections to a terminated host session."
|
||
DEFVAL { not-applicable }
|
||
::= { nlLlc2HostEntry 14 }
|
||
|
||
nlLlc2HostRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Row status convention for LLC2 Host entry."
|
||
::= { nlLlc2HostEntry 15 }
|
||
|
||
nlLlc2HostInterface OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "LLC2 interface number associated with this host entry, always
|
||
300 for non-FRX7000."
|
||
DEFVAL { 300 }
|
||
::= { nlLlc2HostEntry 16 }
|
||
|
||
nlLlc2HostGroup OBJECT-TYPE
|
||
SYNTAX INTEGER (1..4)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Traffic group associated with LLC2 interface, always 1 for
|
||
non-FRX7000."
|
||
::= { nlLlc2HostEntry 17 }
|
||
|
||
-- LLC2 Terminated Host Connection Table.
|
||
--
|
||
nlLlc2TermConnectionTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF NlLlc2TermConnectionEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to describe LLC2 Terminated Host Connections."
|
||
::= { llc2 2 }
|
||
|
||
nlLlc2TermConnectionEntry OBJECT-TYPE
|
||
SYNTAX NlLlc2TermConnectionEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "An LLC2 Terminated Host Connection entry containing
|
||
objects relating to LLC2 terminated host connections."
|
||
INDEX { nlLlc2HostGroup, nlLlc2HostIndex, nlLlc2TermConnectionSequence }
|
||
::= { nlLlc2TermConnectionTable 1 }
|
||
|
||
NlLlc2TermConnectionEntry ::=
|
||
SEQUENCE {
|
||
nlLlc2TermConnectionSequence INTEGER,
|
||
nlLlc2TermConnectionHSAP INTEGER,
|
||
nlLlc2TermConnectionLocalSubscriberId NlSubscriberAddress,
|
||
nlLlc2TermConnectionRemoteSubscriberId NlSubscriberAddress,
|
||
nlLlc2TermConnectionRowStatus RowStatus
|
||
}
|
||
|
||
nlLlc2TermConnectionSequence OBJECT-TYPE
|
||
SYNTAX INTEGER (1..16)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "LLC2 Host connection Sequence number"
|
||
::= { nlLlc2TermConnectionEntry 1 }
|
||
|
||
nlLlc2TermConnectionHSAP OBJECT-TYPE
|
||
SYNTAX INTEGER (4..254)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Service Access point used to connect to the Host"
|
||
DEFVAL { 4 }
|
||
::= { nlLlc2TermConnectionEntry 2 }
|
||
|
||
nlLlc2TermConnectionLocalSubscriberId OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "LLC2 Host Connection's Local Subscriber Id"
|
||
::= { nlLlc2TermConnectionEntry 3 }
|
||
|
||
nlLlc2TermConnectionRemoteSubscriberId OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "LLC2 Host Connection's Remote Subscriber Id"
|
||
::= { nlLlc2TermConnectionEntry 4 }
|
||
|
||
nlLlc2TermConnectionRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the nlLlc2TermConnectionTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { nlLlc2TermConnectionEntry 5 }
|
||
|
||
-- LLC2 Originated Host Connection Table.
|
||
--
|
||
nlLlc2OrigConnectionTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF NlLlc2OrigConnectionEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to describe LLC2 Originated Host Connections."
|
||
::= { llc2 3 }
|
||
|
||
nlLlc2OrigConnectionEntry OBJECT-TYPE
|
||
SYNTAX NlLlc2OrigConnectionEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "An LLC2 Originated Host Connection entry containing
|
||
objects relating to LLC2 originated host connections."
|
||
INDEX { nlLlc2HostGroup, nlLlc2HostIndex, nlLlc2OrigConnectionSequence }
|
||
::= { nlLlc2OrigConnectionTable 1 }
|
||
|
||
NlLlc2OrigConnectionEntry ::=
|
||
SEQUENCE {
|
||
nlLlc2OrigConnectionSequence INTEGER,
|
||
nlLlc2OrigConnectionHSAP INTEGER,
|
||
nlLlc2OrigConnectionType INTEGER,
|
||
nlLlc2OrigConnectionLocalSubscriberId NlSubscriberAddress,
|
||
nlLlc2OrigConnectionRemoteSubscriberId NlSubscriberAddress,
|
||
nlLlc2OrigConnectionIDBLK INTEGER,
|
||
nlLlc2OrigConnectionIDNUM INTEGER,
|
||
nlLlc2OrigConnectionMAXDATA INTEGER,
|
||
nlLlc2OrigConnectionMAXIN INTEGER,
|
||
nlLlc2OrigConnectionRowStatus RowStatus
|
||
}
|
||
|
||
nlLlc2OrigConnectionSequence OBJECT-TYPE
|
||
SYNTAX INTEGER (1..16)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "LLC2 Host connection Sequence number"
|
||
::= { nlLlc2OrigConnectionEntry 1 }
|
||
|
||
nlLlc2OrigConnectionHSAP OBJECT-TYPE
|
||
SYNTAX INTEGER (4..254)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Service Access point used to connect to the Host"
|
||
DEFVAL { 4 }
|
||
::= { nlLlc2OrigConnectionEntry 2 }
|
||
|
||
nlLlc2OrigConnectionType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
sdlc(1),
|
||
llc2(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Specifies Remote subscriber device type"
|
||
DEFVAL { llc2 }
|
||
::= { nlLlc2OrigConnectionEntry 3 }
|
||
|
||
nlLlc2OrigConnectionLocalSubscriberId OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "LLC2 Host Connection's Local Subscriber Id"
|
||
::= { nlLlc2OrigConnectionEntry 4 }
|
||
|
||
nlLlc2OrigConnectionRemoteSubscriberId OBJECT-TYPE
|
||
SYNTAX NlSubscriberAddress
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "LLC2 Host Connection's Remote Subscriber Id"
|
||
::= { nlLlc2OrigConnectionEntry 5 }
|
||
|
||
nlLlc2OrigConnectionIDBLK OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "This field is obsolete"
|
||
DEFVAL { 0 }
|
||
::= { nlLlc2OrigConnectionEntry 6 }
|
||
|
||
nlLlc2OrigConnectionIDNUM OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "This field is obsolete"
|
||
DEFVAL { 0 }
|
||
::= { nlLlc2OrigConnectionEntry 7 }
|
||
|
||
nlLlc2OrigConnectionMAXDATA OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "This field is obsolete"
|
||
DEFVAL { 0 }
|
||
::= { nlLlc2OrigConnectionEntry 8 }
|
||
|
||
nlLlc2OrigConnectionMAXIN OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "This field is obsolete"
|
||
DEFVAL { 0 }
|
||
::= { nlLlc2OrigConnectionEntry 9 }
|
||
|
||
nlLlc2OrigConnectionRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the nlLlc2OrigConnectionTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { nlLlc2OrigConnectionEntry 10 }
|
||
|
||
nlLlc2NextHostNumber OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The host number to be used for the next created
|
||
host record, always 1 on non-FRX7000."
|
||
DEFVAL { 1 }
|
||
::= { llc2 4 }
|
||
|
||
-- **********************
|
||
-- * THE STATUS GROUP *
|
||
-- **********************
|
||
|
||
status OBJECT IDENTIFIER ::= { local 7 }
|
||
|
||
--
|
||
-- The Port Pin Status Table
|
||
--
|
||
|
||
pinStatusTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortPinEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to describe the status of each pin on a
|
||
physical port. This table is indexed by RLP and Port"
|
||
::= { status 4 }
|
||
|
||
portPinEntry OBJECT-TYPE
|
||
SYNTAX PortPinEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A port pin entry containing objects relating to ports."
|
||
INDEX { portPinRlp,portPinPort }
|
||
::= { pinStatusTable 1 }
|
||
|
||
PortPinEntry ::=
|
||
SEQUENCE {
|
||
portPinRlp
|
||
INTEGER,
|
||
portPinPort
|
||
INTEGER,
|
||
portPinStatus
|
||
OCTET STRING
|
||
}
|
||
|
||
portPinRlp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP number on the node"
|
||
::= { portPinEntry 1 }
|
||
|
||
portPinPort OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Port number on the RLP. Port numbers 0-7 are
|
||
known to be physical ports."
|
||
::= { portPinEntry 2 }
|
||
|
||
portPinStatus OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The status of all pins for this physical port. There
|
||
is one octet value for each of the pins. Each octet value is defined
|
||
as follows:
|
||
00 = unknown
|
||
01 = active
|
||
02 = inactive
|
||
03 = unused "
|
||
::= { portPinEntry 3 }
|
||
|
||
-- **************************
|
||
-- * THE STATISTICS GROUP *
|
||
-- **************************
|
||
|
||
statistics OBJECT IDENTIFIER ::= { local 8 }
|
||
statGroup OBJECT IDENTIFIER ::= { statistics 1 }
|
||
|
||
--
|
||
-- The RLP Statistics group define the RLPStats Table
|
||
--
|
||
|
||
rlpStatsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF RlpStatsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to describe Statistics on each RLP"
|
||
::= { statGroup 2 }
|
||
|
||
rlpStatsEntry OBJECT-TYPE
|
||
SYNTAX RlpStatsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "An RLP statistics entry containing objects relating
|
||
to RLP statistics."
|
||
INDEX { rlpStatsIndex }
|
||
::= { rlpStatsTable 1 }
|
||
|
||
RlpStatsEntry ::=
|
||
SEQUENCE {
|
||
rlpStatsIndex
|
||
INTEGER,
|
||
rlpStatsUsedBuffers
|
||
Counter,
|
||
rlpStatsQMessages
|
||
Counter,
|
||
rlpStatsInFrames
|
||
Counter,
|
||
rlpStatsOutFrames
|
||
Counter,
|
||
rlpStatsFrameRejects
|
||
Counter,
|
||
rlpStatsFrameRetransmits
|
||
Counter
|
||
}
|
||
rlpStatsIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP number"
|
||
::= { rlpStatsEntry 1 }
|
||
|
||
rlpStatsQMessages OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of frames queued on the RLP"
|
||
::= { rlpStatsEntry 2 }
|
||
|
||
rlpStatsUsedBuffers OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The percentage of total buffers available being used at
|
||
the moment of inquiry"
|
||
::= { rlpStatsEntry 3 }
|
||
|
||
rlpStatsInFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of frames received."
|
||
::= { rlpStatsEntry 4 }
|
||
|
||
rlpStatsOutFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of frames transmitted."
|
||
::= { rlpStatsEntry 5 }
|
||
|
||
rlpStatsFrameRejects OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of frames rejected."
|
||
::= { rlpStatsEntry 6 }
|
||
|
||
rlpStatsFrameRetransmits OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of frames retransmitted . If
|
||
this value is consistently greater than zero and there are no other
|
||
problems, then increase the retransmission parameter."
|
||
::= { rlpStatsEntry 7 }
|
||
|
||
--
|
||
-- The Port Statistics group define the portStats Table
|
||
--
|
||
|
||
portStatsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortStatsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to describe Statistics on each RLP"
|
||
::= { statGroup 3 }
|
||
|
||
portStatsEntry OBJECT-TYPE
|
||
SYNTAX PortStatsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A port statistics entry containing objects relating
|
||
to port statistics."
|
||
INDEX { portStatsRlpIndex, portStatsIndex }
|
||
::= { portStatsTable 1 }
|
||
|
||
PortStatsEntry ::=
|
||
SEQUENCE {
|
||
portStatsRlpIndex
|
||
INTEGER,
|
||
portStatsIndex
|
||
INTEGER,
|
||
portStatsInFrames
|
||
Counter,
|
||
portStatsOutFrames
|
||
Counter,
|
||
portStatsFrameRetrans
|
||
Counter,
|
||
portStatsFCSErrors
|
||
Counter,
|
||
portStatsLogicalRejects
|
||
Counter,
|
||
portStatsInPercentUtils
|
||
Counter,
|
||
portStatsOutPercentUtils
|
||
Counter
|
||
}
|
||
|
||
portStatsRlpIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP number"
|
||
::= { portStatsEntry 1 }
|
||
|
||
portStatsIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Port number"
|
||
::= { portStatsEntry 2 }
|
||
|
||
portStatsInFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of frames received."
|
||
::= { portStatsEntry 3 }
|
||
|
||
portStatsOutFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of frames transmitted."
|
||
::= { portStatsEntry 4 }
|
||
|
||
portStatsFrameRetrans OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of frames retransmitted."
|
||
::= { portStatsEntry 5 }
|
||
|
||
portStatsFCSErrors OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of Frame Check Sequence (FCS) errors.
|
||
A value consistently greater than zero indicates line probelms."
|
||
::= { portStatsEntry 6 }
|
||
|
||
portStatsLogicalRejects OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The sum of Rejects and Frame Rejects.
|
||
A value consistently greater than zero indicates line probelms."
|
||
::= { portStatsEntry 7 }
|
||
|
||
portStatsInPercentUtils OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The ratio of non-flag characters to total characters
|
||
being received by the port."
|
||
::= { portStatsEntry 8 }
|
||
|
||
portStatsOutPercentUtils OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The ration of non-flag characters to total characters
|
||
being transmitted by the port."
|
||
::= { portStatsEntry 9 }
|
||
|
||
statFrame OBJECT IDENTIFIER ::= { statGroup 4 }
|
||
|
||
--
|
||
-- The Frame Relay Frame Level Statistics group defines the FlvFRStats Table
|
||
--
|
||
|
||
frStatsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF FrStatsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to describe Frame Relay Frame Level Statistics on each Port"
|
||
::= { statFrame 1}
|
||
|
||
frStatsEntry OBJECT-TYPE
|
||
SYNTAX FrStatsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A frame relay port statistics entry containing objects
|
||
relating to frame relay port statistics."
|
||
INDEX { frStatsRlpIndex, frStatsPortIndex }
|
||
::= { frStatsTable 1 }
|
||
|
||
FrStatsEntry ::=
|
||
SEQUENCE {
|
||
frStatsRlpIndex
|
||
INTEGER,
|
||
frStatsPortIndex
|
||
INTEGER,
|
||
frStatsRxDEFrames
|
||
Counter,
|
||
frStatsTxDEFrames
|
||
Counter,
|
||
frStatsTxFECNFrames
|
||
Counter,
|
||
frStatsRxFECNFrames
|
||
Counter,
|
||
frStatsTxBECNFrames
|
||
Counter,
|
||
frStatsRxBECNFrames
|
||
Counter,
|
||
frStatsTxLMIFrames
|
||
Counter,
|
||
frStatsRxLMIFrames
|
||
Counter,
|
||
frStatsTxANXDFrames
|
||
Counter,
|
||
frStatsRxANXDFrames
|
||
Counter,
|
||
frStatsTotDiscFrames
|
||
Counter
|
||
-- For the current time, we don't separate Discarded Frames
|
||
-- frStatsTxDiscFrames
|
||
-- Counter,
|
||
-- frStatsRxDiscFrames
|
||
-- Counter
|
||
}
|
||
frStatsRlpIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP Number."
|
||
::= { frStatsEntry 1 }
|
||
|
||
frStatsPortIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Port number."
|
||
::= { frStatsEntry 2 }
|
||
|
||
frStatsTxDEFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of frames transmitted on the port with the
|
||
Discard Eligibility bit set."
|
||
::= { frStatsEntry 3 }
|
||
|
||
frStatsRxDEFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of frames received on the port with the discard
|
||
eligibility bit set."
|
||
::= { frStatsEntry 4 }
|
||
|
||
frStatsTxFECNFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The of number of frames transmitted on the port with FECN."
|
||
::= { frStatsEntry 5 }
|
||
|
||
frStatsRxFECNFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of frames received on the port with FECN."
|
||
::= { frStatsEntry 6 }
|
||
|
||
frStatsTxBECNFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of frames transmitted on the port with BECN."
|
||
::= { frStatsEntry 7 }
|
||
|
||
frStatsRxBECNFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of frames received on the port with BECN."
|
||
::= { frStatsEntry 8 }
|
||
|
||
frStatsTxLMIFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of LMI frames transmitted on the port."
|
||
::= { frStatsEntry 9 }
|
||
|
||
frStatsRxLMIFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of LMI frames received on the port."
|
||
::= { frStatsEntry 10 }
|
||
|
||
frStatsTxANXDFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of AnnexD frames transmitted on the port"
|
||
::= { frStatsEntry 11 }
|
||
--
|
||
frStatsRxANXDFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of AnnexD frames received on the port"
|
||
::= { frStatsEntry 12 }
|
||
--
|
||
frStatsTotDiscFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The total number of discarded frames on the port."
|
||
::= { frStatsEntry 13 }
|
||
--
|
||
-- frStatsRxDiscFrames OBJECT-TYPE
|
||
-- SYNTAX Counter
|
||
-- ACCESS read-only
|
||
-- STATUS mandatory
|
||
-- DESCRIPTION "The number of INFO Frames transmitted on the port"
|
||
-- ::= { frStatsEntry 14 }
|
||
--
|
||
-- The X25 Frame Level Tx Statistics group define the FlvX25TxStats Table
|
||
--
|
||
|
||
x25TxStatsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF X25TxStatsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to describe X25 Frame Level Txmit Statistics on each Port"
|
||
::= { statFrame 2 }
|
||
|
||
x25TxStatsEntry OBJECT-TYPE
|
||
SYNTAX X25TxStatsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "An X25 frame level transmit statistics entry containing
|
||
objects relating to x25 frame level transmit statistics."
|
||
INDEX { x25TxRlpIndex, x25TxPortIndex }
|
||
::= { x25TxStatsTable 1 }
|
||
|
||
X25TxStatsEntry ::=
|
||
SEQUENCE {
|
||
x25TxRlpIndex
|
||
INTEGER,
|
||
x25TxPortIndex
|
||
INTEGER,
|
||
x25TxSABMFrames
|
||
Counter,
|
||
x25TxUAFrames
|
||
Counter,
|
||
x25TxDISCFrames
|
||
Counter,
|
||
x25TxDMFrames
|
||
Counter,
|
||
x25TxFRMRFrames
|
||
Counter,
|
||
x25TxREJFrames
|
||
Counter,
|
||
x25TxRRFrames
|
||
Counter,
|
||
x25TxRNRFrames
|
||
Counter,
|
||
x25TxINFOFrames
|
||
Counter
|
||
}
|
||
x25TxRlpIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP Number."
|
||
::= { x25TxStatsEntry 1 }
|
||
|
||
x25TxPortIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Port number."
|
||
::= { x25TxStatsEntry 2 }
|
||
|
||
x25TxSABMFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of SABM's transmitted on the port."
|
||
::= { x25TxStatsEntry 3 }
|
||
|
||
x25TxUAFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of UA Frames transmitted on the port."
|
||
::= { x25TxStatsEntry 4 }
|
||
|
||
x25TxDISCFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of DISC Frames transmitted on the port."
|
||
::= { x25TxStatsEntry 5 }
|
||
|
||
x25TxDMFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of DM frames transmitted on the port."
|
||
::= { x25TxStatsEntry 6 }
|
||
|
||
x25TxFRMRFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The of Number of FRMR frames transmitted on the port."
|
||
::= { x25TxStatsEntry 7 }
|
||
|
||
x25TxREJFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of Reject Frames transmitted on the port."
|
||
::= { x25TxStatsEntry 8 }
|
||
|
||
x25TxRRFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of RR frames transmitted on the port."
|
||
::= { x25TxStatsEntry 9 }
|
||
|
||
x25TxRNRFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of RNR Frames transmitted on the port."
|
||
::= { x25TxStatsEntry 10 }
|
||
|
||
x25TxINFOFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of INFO Frames transmitted on the port"
|
||
::= { x25TxStatsEntry 11 }
|
||
--
|
||
-- The X25 Frame Level Rx Statistics group define the FlvX25RxStats Table
|
||
--
|
||
|
||
x25RxStatsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF X25RxStatsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to describe X25 Frame Level Rxmit Statistics on each Port"
|
||
::= { statFrame 3 }
|
||
|
||
x25RxStatsEntry OBJECT-TYPE
|
||
SYNTAX X25RxStatsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "An X25 frame level receive statistics entry containing
|
||
objects relating to x25 frame level receive statistics."
|
||
INDEX { x25RxRlpIndex, x25RxPortIndex }
|
||
::= { x25RxStatsTable 1 }
|
||
|
||
X25RxStatsEntry ::=
|
||
SEQUENCE {
|
||
x25RxRlpIndex
|
||
INTEGER,
|
||
x25RxPortIndex
|
||
INTEGER,
|
||
x25RxSABMFrames
|
||
Counter,
|
||
x25RxUAFrames
|
||
Counter,
|
||
x25RxDISCFrames
|
||
Counter,
|
||
x25RxDMFrames
|
||
Counter,
|
||
x25RxFRMRFrames
|
||
Counter,
|
||
x25RxREJFrames
|
||
Counter,
|
||
x25RxRRFrames
|
||
Counter,
|
||
x25RxRNRFrames
|
||
Counter,
|
||
x25RxINFOFrames
|
||
Counter
|
||
}
|
||
x25RxRlpIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP Number."
|
||
::= { x25RxStatsEntry 1 }
|
||
|
||
x25RxPortIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Port number."
|
||
::= { x25RxStatsEntry 2 }
|
||
|
||
x25RxSABMFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of SABM's received on the port."
|
||
::= { x25RxStatsEntry 3 }
|
||
|
||
x25RxUAFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of UA Frames received on the port."
|
||
::= { x25RxStatsEntry 4 }
|
||
|
||
x25RxDISCFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of DISC Frames received on the port."
|
||
::= { x25RxStatsEntry 5 }
|
||
|
||
x25RxDMFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of DM frames received on the port."
|
||
::= { x25RxStatsEntry 6 }
|
||
|
||
x25RxFRMRFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The of Number of FRMR frames received on the port."
|
||
::= { x25RxStatsEntry 7 }
|
||
|
||
x25RxREJFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of Reject Frames received on the port."
|
||
::= { x25RxStatsEntry 8 }
|
||
|
||
x25RxRRFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of RR frames received on the port."
|
||
::= { x25RxStatsEntry 9 }
|
||
|
||
x25RxRNRFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of RNR Frames received on the port."
|
||
::= { x25RxStatsEntry 10 }
|
||
|
||
x25RxINFOFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of INFO Frames received on the port"
|
||
::= { x25RxStatsEntry 11 }
|
||
|
||
statBag OBJECT IDENTIFIER ::= { statGroup 5 }
|
||
statIp OBJECT IDENTIFIER ::= { statGroup 6 }
|
||
statT1 OBJECT IDENTIFIER ::= { statGroup 7 }
|
||
|
||
-- The statistics group for T1 Channels.
|
||
|
||
t1StatsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF T1StatsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to describe T1 Statistics."
|
||
::= { statT1 1}
|
||
|
||
t1StatsEntry OBJECT-TYPE
|
||
SYNTAX T1StatsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A T1 port statistics entry containing objects relating
|
||
to T1 port statistics."
|
||
INDEX { t1StatsRlpIndex, t1StatsPortIndex }
|
||
::= { t1StatsTable 1 }
|
||
|
||
T1StatsEntry ::=
|
||
SEQUENCE {
|
||
t1StatsRlpIndex
|
||
INTEGER,
|
||
t1StatsPortIndex
|
||
INTEGER,
|
||
t1StatsRcvFrames
|
||
Counter,
|
||
t1StatsXmitFrames
|
||
Counter,
|
||
t1StatsLCVCnt
|
||
Counter,
|
||
t1StatsPCVRErrs
|
||
Counter,
|
||
t1StatsOOSCnt
|
||
Counter,
|
||
t1StatsBlueAlarms
|
||
Counter,
|
||
t1StatsYellowAlarms
|
||
Counter,
|
||
t1StatsRedAlarms
|
||
Counter,
|
||
t1StatsRcvUsage
|
||
Counter,
|
||
t1StatsXmitUsage
|
||
Counter,
|
||
t1StatsXmitAbortFrames
|
||
Counter,
|
||
t1StatsRcvAbortFrames
|
||
Counter,
|
||
t1StatsRcvOverruns
|
||
Counter,
|
||
t1StatsRcvErrors
|
||
Counter,
|
||
t1StatsRcvChannelErrors
|
||
Counter
|
||
}
|
||
|
||
t1StatsRlpIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP Number."
|
||
::= { t1StatsEntry 1 }
|
||
|
||
t1StatsPortIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Port Number."
|
||
::= { t1StatsEntry 2 }
|
||
|
||
t1StatsRcvFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Total received frames."
|
||
::= { t1StatsEntry 3 }
|
||
|
||
t1StatsXmitFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Total transmitted frames."
|
||
::= { t1StatsEntry 4 }
|
||
|
||
t1StatsLCVCnt OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Line code violation count."
|
||
::= { t1StatsEntry 5 }
|
||
|
||
t1StatsPCVRErrs OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "PCVR Bit error count."
|
||
::= { t1StatsEntry 6 }
|
||
|
||
t1StatsOOSCnt OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Multiframe out of sync count."
|
||
::= { t1StatsEntry 7 }
|
||
|
||
t1StatsBlueAlarms OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Blue alarm count."
|
||
::= { t1StatsEntry 8 }
|
||
|
||
t1StatsYellowAlarms OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Yellow alarm count."
|
||
::= { t1StatsEntry 9 }
|
||
|
||
t1StatsRedAlarms OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Red alarm count."
|
||
::= { t1StatsEntry 10 }
|
||
|
||
t1StatsRcvUsage OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Receive port utilization."
|
||
::= { t1StatsEntry 11 }
|
||
|
||
t1StatsXmitUsage OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Transmit port utilization."
|
||
::= { t1StatsEntry 12 }
|
||
|
||
t1StatsXmitAbortFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Total aborted transmit frames."
|
||
::= { t1StatsEntry 13 }
|
||
|
||
t1StatsRcvAbortFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Total aborted receive frames."
|
||
::= { t1StatsEntry 14 }
|
||
|
||
t1StatsRcvOverruns OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Total receive overruns."
|
||
::= { t1StatsEntry 15 }
|
||
|
||
t1StatsRcvErrors OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Total bad receives."
|
||
::= { t1StatsEntry 16 }
|
||
|
||
t1StatsRcvChannelErrors OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Total bad receives."
|
||
::= { t1StatsEntry 17 }
|
||
|
||
-- The statistics group for DS0A.
|
||
|
||
statDS0A OBJECT IDENTIFIER ::= { statGroup 8 }
|
||
|
||
ds0aStatsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DS0AStatsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to describe DS0A Statistics."
|
||
::= { statDS0A 1}
|
||
|
||
ds0aStatsEntry OBJECT-TYPE
|
||
SYNTAX DS0AStatsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A DS0A port statistics entry containing objects relating
|
||
to DS0A port statistics."
|
||
INDEX { ds0aStatsRlpIndex, ds0aStatsPortIndex, ds0aStatsChannelIndex }
|
||
::= { ds0aStatsTable 1 }
|
||
|
||
DS0AStatsEntry ::=
|
||
SEQUENCE {
|
||
ds0aStatsRlpIndex
|
||
INTEGER,
|
||
ds0aStatsPortIndex
|
||
INTEGER,
|
||
ds0aStatsChannelIndex
|
||
INTEGER,
|
||
ds0aStatsXmitFrames
|
||
Counter,
|
||
ds0aStatsRcvFrames
|
||
Counter,
|
||
ds0aStatsRcvAbortFrames
|
||
Counter,
|
||
ds0aStatsRcvOverruns
|
||
Counter,
|
||
ds0aStatsRcvErrors
|
||
Counter
|
||
}
|
||
|
||
ds0aStatsRlpIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP Number."
|
||
::= { ds0aStatsEntry 1 }
|
||
|
||
ds0aStatsPortIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Port Number."
|
||
::= { ds0aStatsEntry 2 }
|
||
|
||
ds0aStatsChannelIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Channel Number."
|
||
::= { ds0aStatsEntry 3 }
|
||
|
||
ds0aStatsXmitFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Total transmitted frames."
|
||
::= { ds0aStatsEntry 4 }
|
||
|
||
ds0aStatsRcvFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Total received frames."
|
||
::= { ds0aStatsEntry 5 }
|
||
|
||
ds0aStatsRcvAbortFrames OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Total receive aborted frames."
|
||
::= { ds0aStatsEntry 6 }
|
||
|
||
ds0aStatsRcvOverruns OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Total receive overruns."
|
||
::= { ds0aStatsEntry 7 }
|
||
|
||
ds0aStatsRcvErrors OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "Total receive errors."
|
||
::= { ds0aStatsEntry 8 }
|
||
|
||
-- The statistics group for Voice.
|
||
statVoice OBJECT IDENTIFIER ::={ statGroup 9 }
|
||
|
||
--
|
||
-- The Voice Statistics Table
|
||
--
|
||
|
||
voiceStatsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF VoiceStatsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to describe Voice over Frame Relay Statistics."
|
||
::= { statVoice 1}
|
||
|
||
voiceStatsEntry OBJECT-TYPE
|
||
SYNTAX VoiceStatsEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A voice port statistics entry containing objects relating
|
||
to voice port statistics."
|
||
INDEX {voiceStatsRlpIndex, voiceStatsPortIndex }
|
||
|
||
::= { voiceStatsTable 1 }
|
||
|
||
VoiceStatsEntry ::=
|
||
SEQUENCE {
|
||
voiceStatsRlpIndex
|
||
INTEGER,
|
||
voiceStatsPortIndex
|
||
INTEGER,
|
||
voiceStatsRxCalls
|
||
Counter,
|
||
voiceStatsTxCalls
|
||
Counter,
|
||
voiceStatsRxCallsAccepts
|
||
Counter,
|
||
voiceStatsTxCallsAccepts
|
||
Counter,
|
||
voiceStatsRxClears
|
||
Counter,
|
||
voiceStatsTxClears
|
||
Counter,
|
||
voiceStatsBusyCalls
|
||
Counter,
|
||
voiceStatsCallTimeouts
|
||
Counter,
|
||
voiceStatsRxCongestions
|
||
Counter,
|
||
voiceStatsTxCongestions
|
||
Counter
|
||
}
|
||
|
||
voiceStatsRlpIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP Number."
|
||
::= { voiceStatsEntry 1 }
|
||
|
||
voiceStatsPortIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Port Number."
|
||
::= { voiceStatsEntry 2 }
|
||
|
||
voiceStatsRxCalls OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Number of Calls Received from the Network."
|
||
::= { voiceStatsEntry 3 }
|
||
|
||
voiceStatsTxCalls OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Number of Calls Transmitted to the Network."
|
||
::= { voiceStatsEntry 4 }
|
||
|
||
voiceStatsRxCallsAccepts OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Number of Call Accepts Received from the Network."
|
||
::= { voiceStatsEntry 5 }
|
||
|
||
voiceStatsTxCallsAccepts OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Number of Call Accepts Transmitted to the Network."
|
||
::= { voiceStatsEntry 6 }
|
||
|
||
voiceStatsRxClears OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Number of Call Receives cleared."
|
||
::= { voiceStatsEntry 7 }
|
||
|
||
voiceStatsTxClears OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Number of Call Transmitts cleared."
|
||
::= { voiceStatsEntry 8 }
|
||
|
||
voiceStatsBusyCalls OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Number of calls which received Busy indication."
|
||
::= { voiceStatsEntry 9 }
|
||
|
||
voiceStatsCallTimeouts OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Number of calls which transmitted time-out to the network."
|
||
::= { voiceStatsEntry 10 }
|
||
|
||
voiceStatsRxCongestions OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of congestion management frames Received."
|
||
::= { voiceStatsEntry 11 }
|
||
|
||
voiceStatsTxCongestions OBJECT-TYPE
|
||
SYNTAX Counter
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of congestion management frames Transmitted."
|
||
::= { voiceStatsEntry 12 }
|
||
|
||
statThresh OBJECT IDENTIFIER ::= { statistics 2 }
|
||
|
||
--
|
||
-- The Statistic Threshold group for RLPs defines the RlpThresh Table
|
||
--
|
||
|
||
rlpThreshTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF RlpThreshEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to describe Statistic thresholds on each RLP"
|
||
::= { statThresh 1 }
|
||
|
||
rlpThreshEntry OBJECT-TYPE
|
||
SYNTAX RlpThreshEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "An RLP statistics threshold entry containing objects
|
||
relating to RLP statistics thresholds."
|
||
INDEX { rlpThreshRlpIndex }
|
||
::= { rlpThreshTable 1 }
|
||
|
||
RlpThreshEntry ::=
|
||
SEQUENCE {
|
||
rlpThreshRlpIndex
|
||
INTEGER,
|
||
rlpThreshPercntBufInUse
|
||
INTEGER,
|
||
rlpThreshMsgQueueLen
|
||
INTEGER,
|
||
rlpThreshRxFramesPerSec
|
||
INTEGER,
|
||
rlpThreshTxFramesPerSec
|
||
INTEGER,
|
||
rlpThreshRejFramesPerSec
|
||
INTEGER,
|
||
rlpThreshRtxFramesPerSec
|
||
INTEGER
|
||
}
|
||
rlpThreshRlpIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP Number."
|
||
::= { rlpThreshEntry 1 }
|
||
|
||
rlpThreshPercntBufInUse OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The threshold for Percent of Buffers in use on the RLP"
|
||
::= { rlpThreshEntry 2 }
|
||
|
||
rlpThreshMsgQueueLen OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The threshold for Percent of Buffers in use on the RLP"
|
||
::= { rlpThreshEntry 3 }
|
||
|
||
rlpThreshRxFramesPerSec OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The threshold for Rcvd frames per second on the RLP"
|
||
::= { rlpThreshEntry 4 }
|
||
|
||
rlpThreshTxFramesPerSec OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The threshold for Txmitted frames per second on the RLP"
|
||
::= { rlpThreshEntry 5 }
|
||
|
||
rlpThreshRejFramesPerSec OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The threshold for Rejected Frames per second on the RLP"
|
||
::= { rlpThreshEntry 6 }
|
||
|
||
rlpThreshRtxFramesPerSec OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The threshold for Retransmitted frames per second on the RLP"
|
||
::= { rlpThreshEntry 7 }
|
||
|
||
--
|
||
-- The Statistic Threshold group for Ports defines the PortThresh Table
|
||
--
|
||
|
||
portThreshTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortThreshEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A Table to describe Statistic thresholds on each port"
|
||
::= { statThresh 2 }
|
||
|
||
portThreshEntry OBJECT-TYPE
|
||
SYNTAX PortThreshEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION "A port statistics threshold entry containing objects
|
||
relating to port statistics thresholds."
|
||
INDEX { portThreshRlpIndex, portThreshIndex }
|
||
::= { portThreshTable 1 }
|
||
|
||
PortThreshEntry ::=
|
||
SEQUENCE {
|
||
portThreshRlpIndex
|
||
INTEGER,
|
||
portThreshIndex
|
||
INTEGER,
|
||
portThreshRxFramesPerSec
|
||
INTEGER,
|
||
portThreshTxFramesPerSec
|
||
INTEGER,
|
||
portThreshRtxFramesPerSec
|
||
INTEGER,
|
||
portThreshFCSErrPerSec
|
||
INTEGER,
|
||
portThreshLogRejPerSec
|
||
INTEGER,
|
||
portThreshTxErrorRatio
|
||
INTEGER,
|
||
portThreshRxErrorRatio
|
||
INTEGER,
|
||
portThreshTxPercentUtl
|
||
INTEGER,
|
||
portThreshRxPercentUtl
|
||
INTEGER
|
||
}
|
||
portThreshRlpIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The RLP Number."
|
||
::= { portThreshEntry 1 }
|
||
|
||
portThreshIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The Port Number."
|
||
::= { portThreshEntry 2 }
|
||
|
||
portThreshRxFramesPerSec OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The threshold for Rcvd frames per second on the port."
|
||
::= { portThreshEntry 3 }
|
||
|
||
portThreshTxFramesPerSec OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The threshold for Txmitted frames per second on the port."
|
||
::= { portThreshEntry 4 }
|
||
|
||
portThreshRtxFramesPerSec OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The threshold for Retransmitted frames per second on the port."
|
||
::= { portThreshEntry 5 }
|
||
|
||
portThreshFCSErrPerSec OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The threshold for FCS errors per second on the port."
|
||
::= { portThreshEntry 6 }
|
||
|
||
portThreshLogRejPerSec OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The threshold for Logical Rejects per second on the port."
|
||
::= { portThreshEntry 7 }
|
||
|
||
portThreshTxErrorRatio OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The threshold for Txmit error ratio on the port."
|
||
::= { portThreshEntry 8 }
|
||
|
||
portThreshRxErrorRatio OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The threshold for Rcv error ratio on the port."
|
||
::= { portThreshEntry 9 }
|
||
|
||
portThreshTxPercentUtl OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The threshold for Txmit percent utilization on the port."
|
||
::= { portThreshEntry 10 }
|
||
|
||
portThreshRxPercentUtl OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "The threshold for Rcv percent utilization on the port."
|
||
::= { portThreshEntry 11 }
|
||
|
||
-- **********************
|
||
-- * THE BRIDGE GROUP *
|
||
-- **********************
|
||
|
||
bridge OBJECT IDENTIFIER ::= { local 9 }
|
||
|
||
bridgeAdminVirtualLANID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4095)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"LAN id inserted into token ring RIF field representing
|
||
internal virtual ring, for LLC2 or bridged traffic"
|
||
::= { bridge 1 }
|
||
|
||
bridgeOperVirtualLANID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4095)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"LAN id inserted into token ring RIF field representing
|
||
internal virtual ring, for LLC2 or bridged traffic"
|
||
::= { bridge 2 }
|
||
|
||
bridgeEnabled OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"When yes the spanning tree algorithm is in effect and all
|
||
traffic types may be bridged. When no only llc/2 terminated
|
||
traffic is allowed on bridge interfaces."
|
||
DEFVAL { yes }
|
||
::= { bridge 3 }
|
||
|
||
bridgeMaxSizeForwardingTable OBJECT-TYPE
|
||
SYNTAX INTEGER (128..65535)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"Number of entries allowed in the bridge forwarding
|
||
table"
|
||
DEFVAL { 65535 }
|
||
::= { bridge 4 }
|
||
|
||
bridgeIPEnabled OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"When yes, and BRIDGING ENABLED, IP traffic will be bridged,
|
||
otherwise IP traffic will be routed."
|
||
DEFVAL { no }
|
||
::= { bridge 5 }
|
||
|
||
bridgeIPXEnabled OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no (1),
|
||
yes (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"When yes, and BRIDGING ENABLED, IPX traffic will be bridged,
|
||
otherwise IPX traffic will be routed."
|
||
DEFVAL { no }
|
||
::= { bridge 6 }
|
||
|
||
bridgeAdminSRBID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..15)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"bridge ID to be inserted into token ring RIF field,
|
||
this bridge"
|
||
DEFVAL { 0 }
|
||
::= { bridge 7 }
|
||
|
||
bridgeOperSRBID OBJECT-TYPE
|
||
SYNTAX INTEGER (0..15)
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"bridge ID to be inserted into token ring RIF field,
|
||
this bridge"
|
||
::= { bridge 8 }
|
||
|
||
bridgeDefaultEthernetFrameType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
type-II (1),
|
||
ieee8023 (2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"default frame type to be used when
|
||
forwarding traffic on ethernet interfaces."
|
||
DEFVAL { type-II }
|
||
::= { bridge 9 }
|
||
|
||
-- **************************
|
||
-- * THE NETLINK IP GROUP *
|
||
-- **************************
|
||
|
||
ipNl OBJECT IDENTIFIER ::= { local 11}
|
||
|
||
--
|
||
-- The Netlink IP Node Defaults Objects
|
||
--
|
||
|
||
nlIpDefaultRIPVersion OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
ripVersion1(1),
|
||
rip1Compatible(2),
|
||
ripVersion2(3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The version of RIP that will be used by IP."
|
||
DEFVAL { ripVersion1 }
|
||
::= { ipNl 1 }
|
||
|
||
-- *****************************
|
||
-- * THE NETLINK VOICE GROUP *
|
||
-- *****************************
|
||
|
||
voice OBJECT IDENTIFIER ::= { local 12 }
|
||
|
||
--
|
||
-- The Netlink Voice System Level Objects
|
||
--
|
||
|
||
voiceSystemVoiceNodeNum OBJECT-TYPE
|
||
SYNTAX INTEGER (1..9999)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The number that identifies this node."
|
||
DEFVAL { 1 }
|
||
::= { voice 1 }
|
||
|
||
voiceSystemRingVolFreq OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
v75-hz-16-66 (1),
|
||
v80-hz-20-00 (2),
|
||
v75-hz-25-00 (3),
|
||
v60-hz-50-00 (4),
|
||
v75-hz-50-00 (5)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The frequency and voltage of the telephone ring circuit.
|
||
In two wire OPX mode, the node provides ring voltage to
|
||
the telephone when it is called by a remote unit."
|
||
DEFVAL { v80-hz-20-00 }
|
||
::= { voice 2 }
|
||
|
||
voiceSystemCountryCode OBJECT-TYPE
|
||
SYNTAX INTEGER (1..999)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The telephone dialing prefix code that identifies
|
||
the country in which the node is installed."
|
||
DEFVAL { 1 }
|
||
::= { voice 3 }
|
||
|
||
voiceSystemDialDigits OBJECT-TYPE
|
||
SYNTAX INTEGER (2..4)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of digits that will be used in the speed
|
||
dialing scheme, as well as the number of digits one
|
||
can specify for the Auto Dial feature. This requires
|
||
rebooting for the change to take effect."
|
||
DEFVAL { 3 }
|
||
::= { voice 4 }
|
||
|
||
voiceSystemVoiceRatesMin OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
bps-4800 (1),
|
||
bps-8000 (2),
|
||
bps-32000 (3),
|
||
bps-64000 (4)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The minimum operating rate of all voice channels when
|
||
congestion occurs."
|
||
DEFVAL { bps-4800 }
|
||
::= { voice 5 }
|
||
|
||
voiceSystemVoiceRatesMax OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
bps-4800 (1),
|
||
bps-8000 (2),
|
||
bps-32000 (3),
|
||
bps-64000 (4)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The maximum operating digitization rate of all voice
|
||
channels when there is no congestion."
|
||
DEFVAL { bps-64000 }
|
||
::= { voice 6 }
|
||
|
||
voiceSystemExtDialDigits OBJECT-TYPE
|
||
SYNTAX INTEGER (0..16)
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "The number of extended dial digits that can be defined
|
||
in the speed map table and/or entered by the user of
|
||
attached equipment as part of a dial string. This requires
|
||
rebooting for the change to take effect."
|
||
DEFVAL { 0 }
|
||
::= { voice 7 }
|
||
|
||
--
|
||
-- The Netlink Voice Speed Dial Map table
|
||
--
|
||
|
||
voiceSpeedDialTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF VoiceSpeedDialEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A list of speed-dial numbers."
|
||
::= { voice 8 }
|
||
|
||
voiceSpeedDialEntry OBJECT-TYPE
|
||
SYNTAX VoiceSpeedDialEntry
|
||
ACCESS not-accessible
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"A Voice Speed Dial entry containing objects relating to
|
||
the speed-dial number that are configurable by the user."
|
||
INDEX { voiceSpeedDialDigits }
|
||
::= { voiceSpeedDialTable 1 }
|
||
|
||
VoiceSpeedDialEntry ::=
|
||
SEQUENCE {
|
||
voiceSpeedDialDigits
|
||
OCTET STRING,
|
||
voiceSpeedDialLongDialMap
|
||
OCTET STRING,
|
||
voiceSpeedDialExtDialStr
|
||
OCTET STRING,
|
||
voiceSpeedDialRowStatus
|
||
RowStatus
|
||
}
|
||
|
||
voiceSpeedDialDigits OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..4))
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The speed-dial number. A question mark wildcard can be used
|
||
for any digit, and an asterisk wildcard can be used for any
|
||
number of digits."
|
||
::= { voiceSpeedDialEntry 1 }
|
||
|
||
voiceSpeedDialLongDialMap OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(6))
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The number for which the speed-dial number is a shortcut."
|
||
::= { voiceSpeedDialEntry 2 }
|
||
|
||
voiceSpeedDialExtDialStr OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..16))
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"The extended set of digits that will be forwarded with the
|
||
call if portVoiceOperExtDigitsSource in the physical port
|
||
record is set to Map."
|
||
::= { voiceSpeedDialEntry 3 }
|
||
|
||
voiceSpeedDialRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION
|
||
"This variable is used to manage the creation and deletion
|
||
of conceptual rows in the voiceSpeedDialTable and follows the
|
||
SNMPv2 RowStatus conventions by supporting the following values:
|
||
|
||
- `active', which indicates that the conceptual row is
|
||
available for use by the managed device. For a management
|
||
protocol set operation, a genErr response is returned when
|
||
the row does not exist.
|
||
|
||
- `createAndGo', which is supplied by a management
|
||
station wishing to create a new instance of a
|
||
conceptual row and to have its status automatically set
|
||
to active, making it available for use by the managed
|
||
device. For a management protocol set operation, a
|
||
genErr response is returned when the row already exists.
|
||
|
||
- `destroy', which is supplied by a management station
|
||
wishing to delete all of the instances associated with
|
||
an existing conceptual row.
|
||
|
||
Note that all of the above values may be specified in a
|
||
management protocol set operation, and only the 'active'
|
||
value will be returned in response to a management protocol
|
||
retrieval operation. For a management protocol set operation,
|
||
if other variable bindings are included in the same PDU, then
|
||
a genErr response is returned."
|
||
::= { voiceSpeedDialEntry 4 }
|
||
|
||
END
|