clones/librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-09-22 10:58:42 +00:00
Code Issues Packages Projects Releases Wiki Activity
42d8d2172b
librenms/mibs/NORTEL-SECURE-NETWORK-ACCESS-MIB
Adam Amstrong 7445a736a6 move nortel mibs to root 
git-svn-id: http://www.observium.org/svn/observer/trunk@1576 61d68cd4-352d-0410-923a-c4978735b2b8
2010-07-31 16:07:50 +00:00

951 lines
31 KiB
Plaintext
Raw Blame History

NORTEL-SECURE-NETWORK-ACCESS-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, RowStatus, MacAddress
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
VlanId, VlanIdOrNone
FROM Q-BRIDGE-MIB
InetAddressType, InetAddress, InetAddressPrefixLength, InetPortNumber
FROM INET-ADDRESS-MIB
IdList
FROM RAPID-CITY
bayStackMibs
FROM SYNOPTICS-ROOT-MIB;
nortelSecureNetworkAccessMib MODULE-IDENTITY
LAST-UPDATED "200705210000Z"
ORGANIZATION "Nortel Networks"
CONTACT-INFO "Nortel Networks"
DESCRIPTION
"Nortel Networks NSNA MIB
Copyright 2004 Nortel Networks, Inc.
All rights reserved.
This Nortel Networks SNMP Management Information Base
Specification embodies Nortel Networks' confidential and
proprietary intellectual property. Nortel Networks retains
all title and ownership in the Specification, including any
revisions.
This Specification is supplied 'AS IS,' and Nortel Networks
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification."
REVISION "200705210000Z" -- 21 May 2007
DESCRIPTION "v20: Added additional enumerations in
nsnaNsnasConnectionState."
REVISION "200704180000Z" -- 18 April 2007
DESCRIPTION "v19: Change fail-open vlan objects to VlanIdOrNone."
REVISION "200703130000Z" -- 13 March 2007
DESCRIPTION "v18: Undo last changes to fail-open objects."
REVISION "200611300000Z" -- 30 November 2006
DESCRIPTION "v17: Added NSNAS RADIUS and Hub Mode support. Updated
fail-open objects."
REVISION "200607070000Z" -- 07 July 2006
DESCRIPTION "v16: Added nsnaNsnasConnectionVersion."
REVISION "200605220000Z" -- 22 May 2006
DESCRIPTION "v15: Added nsnaClientStatus."
REVISION "200605190000Z" -- 19 May 2006
DESCRIPTION "v14: Changes to make Fail-Open configurable on switch."
REVISION "200604260000Z" -- 26 April 2006
DESCRIPTION "v13: Added objects for MAC authentication and
Fail-Open features."
REVISION "200602240000Z" -- 24 February 2006
DESCRIPTION "v12: Added nsnaSnasConnected."
REVISION "200510240000Z" -- 24 October 2005
DESCRIPTION "v11: Added nsnaClientExpired."
REVISION "200508180000Z" -- 18 August 2005
DESCRIPTION "v10: Changes for sscp negotiation of timer intervals."
REVISION "200508100000Z" -- 10 August 2005
DESCRIPTION "v9: Clarify meaning of maximum status-quo interval value.
Added objects for current SSCP connection status.
Expanded range of nsnaVlanFilterSetName to 0..255."
REVISION "200507280000Z" -- 28 July 2005
DESCRIPTION "v8: Add notification types."
REVISION "200507180000Z" -- 18 July 2005
DESCRIPTION "v7: Add IMPLIED to index of IP phone signature string table."
REVISION "200507070000Z" -- 7 July 2005
DESCRIPTION "v6: Added support for IP phone signature string configuration."
REVISION "200506220000Z" -- 22 June 2005
DESCRIPTION "v5: Fixed naming of nsnaNsnasTable."
REVISION "200506020000Z" -- 02 June 2005
DESCRIPTION "v4: Changed range of nsnaVlanFilterSetId to 0..1024.
Changed nsnsPortGreenVlanId from VlanId to VlanIdOrNone."
REVISION "200505040000Z" -- 05 May 2005
DESCRIPTION "v3: Fixed MAX-ACCESS for nsnaStatusQuoInterval."
REVISION "200504210000Z" -- 21 April 2005
DESCRIPTION "v2: Added nsnaStatusQuoInterval. Changed DEFVAL for
hello interval to 60 seconds."
REVISION "200504190000Z" -- 19 April 2005
DESCRIPTION "v1: Initial version."
::= { bayStackMibs 10 }
nsnaNotifications OBJECT IDENTIFIER ::= { nortelSecureNetworkAccessMib 0 }
nsnaObjects OBJECT IDENTIFIER ::= { nortelSecureNetworkAccessMib 1 }
-- -------------------------------------------------------------
-- NSNA Textual Conventions
-- -------------------------------------------------------------
--
-- NOTE: This TC is a clone of the new VlanIdOrNone TC that will soon be
-- available in the update of RFC 2674. When that update becomes
-- an RFC, this TC should be removed, and instances of it should be
-- changed to the official TC.
--
NsnaVlanIdOrNone ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The VLAN ID that uniquely identifies a specific VLAN,
or no VLAN. The special value of zero is used to
indicate that no VLAN ID is present or used. This can
be used in any situation where an object or a table entry
must refer either to a specific VLAN, or to no VLAN.
Note that a MIB object that is defined using this
TEXTUAL-CONVENTION should clarify the meaning of
'no VLAN' (i.e., the special value 0)."
SYNTAX Integer32 (0 | 1..4094)
-- -------------------------------------------------------------
-- NSNA Scalar Objects
-- -------------------------------------------------------------
nsnaScalars OBJECT IDENTIFIER ::= { nsnaObjects 1 }
nsnaEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether NSNA is globally enabled for the system."
::= { nsnaScalars 1 }
nsnaNsnasConnectionState OBJECT-TYPE
SYNTAX INTEGER {
notConnected(1),
connected(2),
connecting(3),
closing(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the switch currently has a connection to
an NSNAS, whether the switch is currently in the process of
establishing a connection to an NSNAS, or whether an existing
connecting to an NSNAS is in the process of being closed."
::= { nsnaScalars 3 }
nsnaNsnasInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If a NSNAS is currently connected to the switch, this indicates
the type of the internet address from which the NSNAS connected.
The contents of nsnaSnasInetAddress will be of this type.
If there is not currently a NSNAS connected, the value will be
unknown(0)."
::= { nsnaScalars 4 }
nsnaNsnasInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If a NSNAS is currently connected to the switch, this indicates
the internet address from which the NSNAS connected. If there
is not currently a NSNAS connected, this will be an empty string."
::= { nsnaScalars 5 }
nsnaNsnasSendHelloInterval OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval for sending SSCP Hello messages for the current SSCP
connection. If this period of time passes without any SSCP
messages being sent, a Hello message will be generated. If there
is not curently an NSNAS connected, this value will be zero,
otherwise it will be non-zero."
::= { nsnaScalars 6 }
nsnaNsnasInactivityInterval OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The inactivity interval for the current SSCP connection. If this
period of time passes without any SSCP messages being received,
the SSCP connection will be closed. If there is not curently an
NSNAS connected, this value will be zero, otherwise it will be
non-zero."
::= { nsnaScalars 7 }
nsnaNsnasStatusQuoInterval OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status-quo interval for the current or last SSCP connection.
If the NSNAS is disconnected from the switch for any reason, the
switch will wait this period of time before moving all NSNA enabled
ports to the red VLAN. The maximum value, 65535, indicates that no
status quo interval is used, and SSA enabled ports will not be
moved to the red VLAN.
If the NSNAS has disconnected and the status-quo interval timer is
running, this value will reflect the remaining time until the
status-quo timer will expire."
::= { nsnaScalars 8 }
nsnaMacAuthenticationEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether MAC Authentication is currently
enabled on the switch."
::= { nsnaScalars 9 }
nsnaFailOpenEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the Fail-Open feature is currently
enabled on the switch."
::= { nsnaScalars 10 }
nsnaFailOpenVlan OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the current Fail-Open Vlan ID. A value of
0 indicates the value either has not been set, or that the
previous value is no longer valid."
::= { nsnaScalars 11 }
nsnaFailOpenFilterVlan OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the current Vlan ID whose associated filters
are to be used as the Fail-Open filters. A value of 0 indicates
the value either has not been set, or that the previous value is
no longer valid."
::= { nsnaScalars 12 }
nsnaNsnasConnectionVersion OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the SSCP version being used in the
current NSNAS connection. If there is no current connection,
the value will be 0."
::= { nsnaScalars 14 }
nsnaNsnasRadiusServerEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the NSNAS currently connected
to the switch is acting as a RADIUS server."
::= { nsnaScalars 15 }
nsnaNsnasRadiusServerPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If there is an NSNAS currently connected to the switch that
is acting as a RADIUS server, this object returns the port
on which that server listens for RADIUS requests."
::= { nsnaScalars 16 }
-- -------------------------------------------------------------
-- NSNA NSNAS Table
-- -------------------------------------------------------------
nsnaNsnasTable OBJECT-TYPE
SYNTAX SEQUENCE OF NsnaNsnasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of subnets from which NSNASs will connect."
::= { nsnaObjects 2 }
nsnaNsnasEntry OBJECT-TYPE
SYNTAX NsnaNsnasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that specify a subnet from which NSNASs will
connect, along with related configuration parameters."
INDEX { nsnaNsnasAddressType, nsnaNsnasAddress, nsnaNsnasAddressMask }
::= { nsnaNsnasTable 1 }
NsnaNsnasEntry ::=
SEQUENCE {
nsnaNsnasAddressType InetAddressType,
nsnaNsnasAddress InetAddress,
nsnaNsnasAddressMask InetAddressPrefixLength,
nsnaNsnasPort InetPortNumber,
nsnaNsnasRowStatus RowStatus
}
nsnaNsnasAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of internet address contained in nsnaNsnasAddress."
::= { nsnaNsnasEntry 1 }
nsnaNsnasAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The internet address portion of the NSNAS subnet. This combined
with the value of nsnaNsnasAddressMask specifies the subnet of
the NSNAS."
::= { nsnaNsnasEntry 2 }
nsnaNsnasAddressMask OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address mask portion of the NSNAS subnet. This combined
with the value of nsnaNsnasAddress specifies the subnet of
the NSNAS."
::= { nsnaNsnasEntry 3 }
nsnaNsnasPort OBJECT-TYPE
SYNTAX InetPortNumber (1024..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port on which NSNASs connecting from this subnet will connect."
DEFVAL { 5000 }
::= { nsnaNsnasEntry 4 }
nsnaNsnasRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used for row create/deletion."
::= { nsnaNsnasEntry 5 }
-- -------------------------------------------------------------
-- NSNA Port Table
-- -------------------------------------------------------------
nsnaPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF NsnaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of per-port NSNA configuration parameters. There must
be an entry in this table for each NSNA-capable port."
::= { nsnaObjects 3 }
nsnaPortEntry OBJECT-TYPE
SYNTAX NsnaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"NSNA configuration parameters for a port."
INDEX { nsnaPortIfIndex }
::= { nsnaPortTable 1 }
NsnaPortEntry ::=
SEQUENCE {
nsnaPortIfIndex InterfaceIndex,
nsnaPortMode INTEGER,
nsnaPortGreenVlanId NsnaVlanIdOrNone,
nsnaPortVoipVlans IdList,
nsnaPortUplinkVlans IdList,
nsnaPortState INTEGER,
nsnaPortDhcpState INTEGER,
nsnaPortHubModeEnabled TruthValue,
nsnaPortHubModeMaxClients Integer32
}
nsnaPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex corresponding to the port."
::= { nsnaPortEntry 1 }
nsnaPortMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
static(2),
dynamic(3),
uplink(4),
secure(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NSNA mode of the port."
::= { nsnaPortEntry 2 }
nsnaPortGreenVlanId OBJECT-TYPE
SYNTAX NsnaVlanIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The green VLAN ID of the port. This value is only used when the
corresponding value of nsnaPortMode is static(2). Otherwise, the
value will be 0."
::= { nsnaPortEntry 3 }
nsnaPortVoipVlans OBJECT-TYPE
SYNTAX IdList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The set of VOIP VLANs to which this port belongs. This value is
only used when the corresponding value of nsnaPortMode is static(2),
dynamic(3), or secure(5)."
::= { nsnaPortEntry 4 }
nsnaPortUplinkVlans OBJECT-TYPE
SYNTAX IdList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The set of uplink VLANs to which this port belongs. This value is
only used when the corresponding value of nsnaPortMode is uplink(4)."
::= { nsnaPortEntry 5 }
nsnaPortState OBJECT-TYPE
SYNTAX INTEGER {
none(1),
red(2),
green(3),
yellow(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current NSNA color of the port."
::= { nsnaPortEntry 6 }
nsnaPortDhcpState OBJECT-TYPE
SYNTAX INTEGER {
blocked(1),
unblocked(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DHCP state of the port."
::= { nsnaPortEntry 7 }
nsnaPortHubModeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether Hub Mode is enabled on a port."
::= { nsnaPortEntry 8 }
nsnaPortHubModeMaxClients OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of clients allowed on a port when Hub Mode
is enabled. The value is ignored if Hub Mode is disabled."
::= { nsnaPortEntry 9 }
-- -------------------------------------------------------------
-- NSNA VLAN Table
-- -------------------------------------------------------------
nsnaVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF NsnaVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of per-Vlan NSNA configuration parameters. There must
be an entry in this table for every Vlan."
::= { nsnaObjects 4 }
nsnaVlanEntry OBJECT-TYPE
SYNTAX NsnaVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"NSNA configuration parameters for a Vlan."
INDEX { nsnaVlanId }
::= { nsnaVlanTable 1 }
NsnaVlanEntry ::=
SEQUENCE {
nsnaVlanId VlanId,
nsnaVlanColor INTEGER,
nsnaVlanFilterSetName SnmpAdminString,
nsnaVlanFilterSetId Integer32,
nsnaVlanYellowSubnetType InetAddressType,
nsnaVlanYellowSubnet InetAddress,
nsnaVlanYellowSubnetMask InetAddressPrefixLength
}
nsnaVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of the Vlan."
::= { nsnaVlanEntry 1 }
nsnaVlanColor OBJECT-TYPE
SYNTAX INTEGER {
none(1),
red(2),
green(3),
yellow(4),
voip(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NSNA color of the Vlan."
::= { nsnaVlanEntry 2 }
nsnaVlanFilterSetName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the filter set associated with the VLAN. An
empty value means that no filter set is associated with
the VLAN."
::= { nsnaVlanEntry 3 }
nsnaVlanFilterSetId OBJECT-TYPE
SYNTAX Integer32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ID of the filter set associated with the VLAN. A value
of 0 means that no filter set is associated with the VLAN."
::= { nsnaVlanEntry 4 }
nsnaVlanYellowSubnetType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of internet address contained in the corresponding
instance of nsnaVlanYellowSubnet."
::= { nsnaVlanEntry 5 }
nsnaVlanYellowSubnet OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The yellow subnet address of the VLAN. This value is only
used when the corresponding value of nsnaVlanColor is
yellow(4)."
::= { nsnaVlanEntry 6 }
nsnaVlanYellowSubnetMask OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of bits in the network mask of the yellow subnet
address of the VLAN. This value is only used when the
corresponding value of nsnaVlanColor is yellow(4)."
::= { nsnaVlanEntry 7 }
-- -------------------------------------------------------------
-- NSNA Client Table
-- -------------------------------------------------------------
nsnaClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF NsnaClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of per-client NSNA state information. There must
be an entry in this table for every NSNA client."
::= { nsnaObjects 5 }
nsnaClientEntry OBJECT-TYPE
SYNTAX NsnaClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"State information for an NSNA client."
INDEX { nsnaClientIfIndex,
nsnaClientMacAddress }
::= { nsnaClientTable 1 }
NsnaClientEntry ::=
SEQUENCE {
nsnaClientIfIndex InterfaceIndex,
nsnaClientMacAddress MacAddress,
nsnaClientDeviceType INTEGER,
nsnaClientVlanId VlanId,
nsnaClientAddressType InetAddressType,
nsnaClientAddress InetAddress,
nsnaClientExpired TruthValue,
nsnaClientFilterVlanId VlanId,
nsnaClientStatus INTEGER
}
nsnaClientIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the port on which the client is attached."
::= { nsnaClientEntry 1 }
nsnaClientMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of the client."
::= { nsnaClientEntry 2 }
nsnaClientDeviceType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
pc(1),
ipPhone(2),
passive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of device of the client."
::= { nsnaClientEntry 3 }
nsnaClientVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Vlan ID of the client."
::= { nsnaClientEntry 4 }
nsnaClientAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address contained in the corresponding instance
of nsnaClientAddress."
::= { nsnaClientEntry 5 }
nsnaClientAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the client."
::= { nsnaClientEntry 6 }
nsnaClientExpired OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this client has been aged-out."
::= { nsnaClientEntry 7 }
nsnaClientFilterVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Vlan ID whose associated filter set is installed on
this port for this client. This is used when MAC
Authentication is enabled. If MAC Authentication is
no enabled, this object will return the same value as
nsnaClientVlanId."
::= { nsnaClientEntry 8 }
nsnaClientStatus OBJECT-TYPE
SYNTAX INTEGER {
authenticatedByNsnas(1),
authenticatedLocally(2),
disallowedByNsnas(3),
isolatedByNsnas(4),
blacklistedByNsnas(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this client."
::= { nsnaClientEntry 9 }
-- -------------------------------------------------------------
-- NSNA Static Client Table
-- -------------------------------------------------------------
nsnaStaticClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF NsnaStaticClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static NSNA client configuration. This is
used for authenticating clients on static NSNA ports."
::= { nsnaObjects 6 }
nsnaStaticClientEntry OBJECT-TYPE
SYNTAX NsnaStaticClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static NSNA client configuration."
INDEX { nsnaStaticClientVlanId,
nsnaStaticClientMacAddress }
::= { nsnaStaticClientTable 1 }
NsnaStaticClientEntry ::=
SEQUENCE {
nsnaStaticClientVlanId VlanId,
nsnaStaticClientMacAddress MacAddress,
nsnaStaticClientDeviceType INTEGER,
nsnaStaticClientAddressType InetAddressType,
nsnaStaticClientAddress InetAddress,
nsnaStaticClientRowStatus RowStatus
}
nsnaStaticClientVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID in which a client is allowed."
::= { nsnaStaticClientEntry 1 }
nsnaStaticClientMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of an allowed client."
::= { nsnaStaticClientEntry 2 }
nsnaStaticClientDeviceType OBJECT-TYPE
SYNTAX INTEGER {
pc(1),
ipPhone(2),
passive(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of device of the allowed client."
::= { nsnaStaticClientEntry 3 }
nsnaStaticClientAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of address contained in the corresponding instance
of nsnaStaticClientAddress."
::= { nsnaStaticClientEntry 4 }
nsnaStaticClientAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address to be used for the allowed client."
::= { nsnaStaticClientEntry 5 }
nsnaStaticClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used for row creation/deletion. When creating a row, the corresponding
instances of nsnaStaticClientDeviceType, nsnaStaticClientAddressType,
and nsnaStaticClientAddress must be set before this object can be made
active(1)."
::= { nsnaStaticClientEntry 6 }
-- -------------------------------------------------------------
-- NSNA IP Phone Signature String Table
-- -------------------------------------------------------------
nsnaIpPhoneSignatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF NsnaIpPhoneSignatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP phone signature string configuration.
This is used for recognizing IP phones."
::= { nsnaObjects 7 }
nsnaIpPhoneSignatureEntry OBJECT-TYPE
SYNTAX NsnaIpPhoneSignatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP phone signature string configuration."
INDEX { IMPLIED nsnaIpPhoneSignatureString }
::= { nsnaIpPhoneSignatureTable 1 }
NsnaIpPhoneSignatureEntry ::=
SEQUENCE {
nsnaIpPhoneSignatureString OCTET STRING,
nsnaIpPhoneSignatureRowStatus RowStatus
}
nsnaIpPhoneSignatureString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The signature string of an IP phone."
::= { nsnaIpPhoneSignatureEntry 1 }
nsnaIpPhoneSignatureRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used for row creation/deletion."
::= { nsnaIpPhoneSignatureEntry 2 }
-- -------------------------------------------------------------
-- NSNA Notification Objects
-- -------------------------------------------------------------
nsnaNotificationObjects OBJECT IDENTIFIER ::= { nsnaObjects 8 }
nsnaClosedConnectionReason OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
snasClosedConnection(2),
dataStreamCorrupted(3),
bufferAllocationFailure(4),
messageProcessingFailure(5),
inactivityIntervalExpired(6),
nsnaAdministrativelyDown(7)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the reason why the connection to the NSNAS was closed."
::= { nsnaNotificationObjects 1 }
nsnaInvalidMessageHeader OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..8))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The header of an invalid message from the NSNAS. Note that if
an entire header is not available, only the portion that is
available will be provided in this object."
::= { nsnaNotificationObjects 2 }
-- -------------------------------------------------------------
-- NSNA Notifications
-- -------------------------------------------------------------
nsnaClosedConnectionToSnas NOTIFICATION-TYPE
OBJECTS {
nsnaClosedConnectionReason
}
STATUS current
DESCRIPTION
"This notification is generated whenever the device closes the
connection to the NSNAS. The reason why the connection is closed
is indicated in nsnaClosedConnectionReason."
::= { nsnaNotifications 1 }
nsnaStatusQuoIntervalExpired NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification is generated whenever the status-quo interval
expires after the connection to the NSNAS has closed. Note that
if the configured status-quo interval is 0 (indicating no status
quo interval), this notification will be generated at the same
time as the corresponding nsnaClosedConnectionToSnas notification."
::= { nsnaNotifications 2 }
nsnaInvalidMessageFromSnas NOTIFICATION-TYPE
OBJECTS {
nsnaInvalidMessageHeader
}
STATUS current
DESCRIPTION
"This notification is generated whenever the device receives an
invalid message from the NSNAS. This generally means that the
received message is corrupted. As much of the message header
as is available will be included in nsnaInvalidMessageHeader."
::= { nsnaNotifications 3 }
nsnaSnasConnected NOTIFICATION-TYPE
OBJECTS {
nsnaNsnasInetAddressType,
nsnaNsnasInetAddress,
nsnaNsnasSendHelloInterval,
nsnaNsnasInactivityInterval,
nsnaNsnasStatusQuoInterval
}
STATUS current
DESCRIPTION
"This notification is generated whenever an NSNAS successfully
connects to the switch."
::= { nsnaNotifications 4 }
END
Reference in New Issue View Git Blame Copy Permalink