mirror of
https://github.com/librenms/librenms.git
synced 2024-09-21 18:38:25 +00:00
36e709ebab
Fixes #9718 This PR adds POE graphs, even if not all the values that are polled on other OSes are available on this one. DO NOT DELETE THIS TEXT #### Please note > Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting. - [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/) #### Testers If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 10075` After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
2042 lines
64 KiB
Plaintext
2042 lines
64 KiB
Plaintext
LINKSYS-BRIDGEMIBOBJECTS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- Title: LINKSYS ROS
|
|
-- Private BRIDGE MIB OBJECTS MIB
|
|
-- Version: 7.46
|
|
-- Date: 15-Jan-2007
|
|
|
|
IMPORTS
|
|
rnd FROM LINKSYS-MIB
|
|
OBJECT-TYPE, MODULE-IDENTITY, TimeTicks, Counter32 FROM SNMPv2-SMI
|
|
TruthValue, DisplayString, RowStatus FROM SNMPv2-TC
|
|
Counter FROM RFC1155-SMI
|
|
BridgeId, Timeout, dot1dBasePort,dot1dStpPort FROM BRIDGE-MIB
|
|
InterfaceIndex, ifIndex FROM IF-MIB
|
|
PortList FROM Q-BRIDGE-MIB
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB;
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Textual Conventions
|
|
-- -------------------------------------------------------------
|
|
|
|
VlanList1 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight
|
|
vlans, with the first octet specifying vlan 1 through
|
|
8, the second octet specifying vlan 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered vlan, and the least significant bit
|
|
represents the highest numbered vlan. Thus, each vlan
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that vlan is included in the set of vlans; the vlan
|
|
is not included if its bit has a value of '0'.
|
|
VlanList1 represent vlans 1-1024"
|
|
SYNTAX OCTET STRING (SIZE(0..128))
|
|
|
|
VlanList2 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"As VlanList1 but represent vlans 1025-2048"
|
|
SYNTAX OCTET STRING (SIZE(0..128))
|
|
|
|
VlanList3 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"As VlanList1 but represent vlans 2049-3072"
|
|
SYNTAX OCTET STRING (SIZE(0..128))
|
|
|
|
VlanList4 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"As VlanList1 but represent vlans 3073-4094"
|
|
SYNTAX OCTET STRING (SIZE(0..128))
|
|
|
|
|
|
|
|
rlpBridgeMIBObjects MODULE-IDENTITY
|
|
LAST-UPDATED "200701020000Z"
|
|
ORGANIZATION "
|
|
Linksys LLC."
|
|
CONTACT-INFO
|
|
"www.linksys.com/business/support"
|
|
DESCRIPTION
|
|
"This private MIB module defines bridge MIB objects private MIBs."
|
|
REVISION "200701020000Z"
|
|
DESCRIPTION
|
|
"Initial revision."
|
|
::= { rnd 57 }
|
|
|
|
rldot1dPriority OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 1 }
|
|
|
|
rldot1dPriorityMibVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MIB's version, the current version is 1."
|
|
::= { rldot1dPriority 1 }
|
|
|
|
--
|
|
-- rldot1dPriorityPortGroupTable
|
|
--
|
|
|
|
rldot1dPriorityPortGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rldot1dPriorityPortGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of PortGroupNumber for each port."
|
|
::= { rldot1dPriority 2 }
|
|
|
|
rldot1dPriorityPortGroupEntry OBJECT-TYPE
|
|
SYNTAX Rldot1dPriorityPortGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All ports belonging to a same group have
|
|
the same User Priority to Traffic Class mapping."
|
|
INDEX { dot1dBasePort }
|
|
::= { rldot1dPriorityPortGroupTable 1 }
|
|
|
|
Rldot1dPriorityPortGroupEntry ::= SEQUENCE {
|
|
rldot1dPriorityPortGroupNumber INTEGER
|
|
}
|
|
|
|
rldot1dPriorityPortGroupNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A group, that port belongs to. All ports belonging
|
|
to a same group have the same User Priority to
|
|
Traffic Class mapping."
|
|
::= { rldot1dPriorityPortGroupEntry 1 }
|
|
|
|
|
|
rldot1dStp OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 2 }
|
|
|
|
--
|
|
-- Scalars
|
|
--
|
|
rldot1dStpMibVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MIB's version, the current version is 2."
|
|
::= { rldot1dStp 1 }
|
|
|
|
rldot1dStpType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
perDevice (1),
|
|
mstp (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the device supports Spanning Tree per device,
|
|
or per group."
|
|
::= { rldot1dStp 2 }
|
|
|
|
rldot1dStpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable / Disable spanning tree. When working in per vlan mode
|
|
enable / disable STP per all vlans."
|
|
DEFVAL { true }
|
|
::= { rldot1dStp 3 }
|
|
|
|
rldot1dStpPortMustBelongToVlan OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether a port must belong to a VLAN in order
|
|
to participate in the STP."
|
|
DEFVAL { true }
|
|
::= { rldot1dStp 4 }
|
|
|
|
rldot1dStpExtendedPortNumberFormat OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the STP uses the extended port fnumber format."
|
|
DEFVAL { false }
|
|
::= { rldot1dStp 5 }
|
|
|
|
--
|
|
-- The Spanning Tree Vlan Table
|
|
--
|
|
rldot1dStpVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rldot1dStpVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains vlan-specific information
|
|
for the Spanning Tree Protocol."
|
|
::= { rldot1dStp 6 }
|
|
|
|
rldot1dStpVlanEntry OBJECT-TYPE
|
|
SYNTAX Rldot1dStpVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information maintained by every Vlan
|
|
about the Spanning Tree Protocol state for that
|
|
Vlan."
|
|
INDEX { rldot1dStpVlan }
|
|
::= { rldot1dStpVlanTable 1 }
|
|
|
|
Rldot1dStpVlanEntry ::= SEQUENCE {
|
|
rldot1dStpVlan INTEGER,
|
|
rldot1dStpVlanEnable TruthValue,
|
|
rldot1dStpTimeSinceTopologyChange TimeTicks,
|
|
rldot1dStpTopChanges Counter,
|
|
rldot1dStpDesignatedRoot BridgeId,
|
|
rldot1dStpRootCost INTEGER,
|
|
rldot1dStpRootPort INTEGER,
|
|
rldot1dStpMaxAge Timeout,
|
|
rldot1dStpHelloTime Timeout,
|
|
rldot1dStpHoldTime INTEGER,
|
|
rldot1dStpForwardDelay Timeout
|
|
}
|
|
|
|
rldot1dStpVlan OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Vlan index."
|
|
::= { rldot1dStpVlanEntry 1 }
|
|
|
|
rldot1dStpVlanEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this vlan is STP enable or disable"
|
|
REFERENCE
|
|
" ?? "
|
|
DEFVAL { true }
|
|
::= { rldot1dStpVlanEntry 2 }
|
|
|
|
rldot1dStpTimeSinceTopologyChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time (in hundredths of a second) since the
|
|
last time a topology change was detected by the
|
|
bridge entity."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.8.1.1.3"
|
|
::= { rldot1dStpVlanEntry 3 }
|
|
|
|
rldot1dStpTopChanges OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of topology changes detected by
|
|
this bridge since the management entity was last
|
|
reset or initialized."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.8.1.1.3"
|
|
::= { rldot1dStpVlanEntry 4 }
|
|
|
|
rldot1dStpDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bridge identifier of the root of the spanning
|
|
tree as determined by the Spanning Tree Protocol
|
|
as executed by this node. This value is used as
|
|
the Root Identifier parameter in all Configuration
|
|
Bridge PDUs originated by this node."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.1"
|
|
::= { rldot1dStpVlanEntry 5 }
|
|
|
|
rldot1dStpRootCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cost of the path to the root as seen from
|
|
this bridge."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.2"
|
|
::= { rldot1dStpVlanEntry 6 }
|
|
|
|
rldot1dStpRootPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the port which offers the
|
|
lowest cost path from this bridge to the root
|
|
bridge."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.3"
|
|
::= { rldot1dStpVlanEntry 7 }
|
|
|
|
rldot1dStpMaxAge OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum age of Spanning Tree Protocol
|
|
information learned from the network on any port
|
|
before it is discarded, in units of hundredths of
|
|
a second. This is the actual value that this
|
|
bridge is currently using."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.4"
|
|
::= { rldot1dStpVlanEntry 8 }
|
|
|
|
rldot1dStpHelloTime OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time between the transmission of
|
|
Configuration bridge PDUs by this node on any port
|
|
when it is the root of the spanning tree or trying
|
|
to become so, in units of hundredths of a second.
|
|
This is the actual value that this bridge is
|
|
currently using."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.5"
|
|
::= { rldot1dStpVlanEntry 9 }
|
|
|
|
rldot1dStpHoldTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This time value determines the interval length
|
|
during which no more than two Configuration bridge
|
|
PDUs shall be transmitted by this node, in units
|
|
of hundredths of a second."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.14"
|
|
::= { rldot1dStpVlanEntry 10 }
|
|
|
|
rldot1dStpForwardDelay OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This time value, measured in units of hundredths
|
|
of a second, controls how fast a port changes its
|
|
spanning state when moving towards the Forwarding
|
|
state. The value determines how long the port
|
|
stays in each of the Listening and Learning
|
|
states, which precede the Forwarding state. This
|
|
value is also used, when a topology change has
|
|
been detected and is underway, to age all dynamic
|
|
entries in the Forwarding Database. [Note that
|
|
this value is the one that this bridge is
|
|
currently using, in contrast to
|
|
dot1dStpBridgeForwardDelay which is the value that
|
|
this bridge and all others would start using
|
|
if/when this bridge were to become the root.]"
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.6"
|
|
::= { rldot1dStpVlanEntry 11 }
|
|
|
|
--
|
|
-- rldot1dStpVlanPortTable
|
|
--
|
|
rldot1dStpVlanPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rldot1dStpVlanPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains pair <vlan, port> specific information
|
|
for the Spanning Tree Protocol."
|
|
::= { rldot1dStp 7 }
|
|
|
|
rldot1dStpVlanPortEntry OBJECT-TYPE
|
|
SYNTAX Rldot1dStpVlanPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information maintained by every pair <vlan, port>
|
|
about the Spanning Tree Protocol state for that pair."
|
|
INDEX { rldot1dStpVlanPortVlan, rldot1dStpVlanPortPort }
|
|
::= { rldot1dStpVlanPortTable 1 }
|
|
|
|
Rldot1dStpVlanPortEntry ::= SEQUENCE {
|
|
rldot1dStpVlanPortVlan INTEGER,
|
|
rldot1dStpVlanPortPort INTEGER,
|
|
rldot1dStpVlanPortPriority INTEGER,
|
|
rldot1dStpVlanPortState INTEGER,
|
|
rldot1dStpVlanPortEnable INTEGER,
|
|
rldot1dStpVlanPortPathCost INTEGER,
|
|
rldot1dStpVlanPortDesignatedRoot BridgeId,
|
|
rldot1dStpVlanPortDesignatedCost INTEGER,
|
|
rldot1dStpVlanPortDesignatedBridge BridgeId,
|
|
rldot1dStpVlanPortDesignatedPort OCTET STRING,
|
|
rldot1dStpVlanPortForwardTransitions Counter
|
|
}
|
|
|
|
rldot1dStpVlanPortVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Vlan number that the port belongs to, and for which this entry
|
|
contains Spanning Tree Protocol management
|
|
information."
|
|
REFERENCE
|
|
"IEEE 802.1s/D2-1999 "
|
|
::= { rldot1dStpVlanPortEntry 1 }
|
|
|
|
rldot1dStpVlanPortPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the port for which this entry
|
|
contains Spanning Tree Protocol management
|
|
information."
|
|
REFERENCE
|
|
"IEEE 802.1t/D2-1999: Section 9.2.6"
|
|
::= { rldot1dStpVlanPortEntry 2 }
|
|
|
|
rldot1dStpVlanPortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the priority field which is
|
|
contained in the more significant 4 bits of the most
|
|
significant octet of the (2 octet long) Port ID.
|
|
The other octet of the Port ID is given by the value
|
|
of rldot1dStpVlanPort."
|
|
REFERENCE
|
|
"IEEE 802.1t/D2-1999: Section 9.2.6"
|
|
::= { rldot1dStpVlanPortEntry 3 }
|
|
|
|
rldot1dStpVlanPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
blocking(2),
|
|
listening(3),
|
|
learning(4),
|
|
forwarding(5),
|
|
broken(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's current state as defined by application of
|
|
the Spanning Tree Protocol. This state controls what
|
|
action a port takes on reception of a frame.
|
|
If the bridge has detected a port that is malfunctioning
|
|
it will place that port into the broken(6) state. For ports
|
|
which are disabled (see dot1dStpVlanPortEnable), this object
|
|
will have a value of disabled(1)."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.2"
|
|
::= { rldot1dStpVlanPortEntry 4 }
|
|
|
|
rldot1dStpVlanPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled/disabled status of the port."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.2"
|
|
::= { rldot1dStpVlanPortEntry 5 }
|
|
|
|
rldot1dStpVlanPortPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The contribution of this port to the path cost of
|
|
paths towards the spanning tree root which include
|
|
this port. 802.1D-1990 recommends that the
|
|
default value of this parameter be in inverse
|
|
proportion to the speed of the attached LAN."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.3"
|
|
::= { rldot1dStpVlanPortEntry 6 }
|
|
|
|
rldot1dStpVlanPortDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique Bridge Identifier of the Bridge
|
|
recorded as the Root in the Configuration BPDUs
|
|
transmitted by the Designated Bridge for the
|
|
segment to which the port is attached."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.4"
|
|
::= { rldot1dStpVlanPortEntry 7 }
|
|
|
|
rldot1dStpVlanPortDesignatedCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path cost of the Designated Port of the
|
|
segment connected to this port. This value is
|
|
compared to the Root Path Cost field in received
|
|
bridge PDUs."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.5"
|
|
::= { rldot1dStpVlanPortEntry 8 }
|
|
|
|
rldot1dStpVlanPortDesignatedBridge OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Bridge Identifier of the bridge which this
|
|
port considers to be the Designated Bridge for
|
|
this port's segment."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.6"
|
|
::= { rldot1dStpVlanPortEntry 9 }
|
|
|
|
rldot1dStpVlanPortDesignatedPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port Identifier of the port on the Designated
|
|
Bridge for this port's segment."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.7"
|
|
::= { rldot1dStpVlanPortEntry 10 }
|
|
|
|
rldot1dStpVlanPortForwardTransitions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this port has transitioned
|
|
from the Learning state to the Forwarding state."
|
|
::= { rldot1dStpVlanPortEntry 11 }
|
|
|
|
--
|
|
-- STP Private TRAP variables
|
|
--
|
|
rldot1dStpTrapVariable OBJECT IDENTIFIER ::= { rldot1dStp 8 }
|
|
|
|
rldot1dStpTrapVrblifIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex of port which STP status was changed"
|
|
::= { rldot1dStpTrapVariable 1 }
|
|
|
|
rldot1dStpTrapVrblVID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VID of VLAN to which the port belongs which STP status was changed"
|
|
::= { rldot1dStpTrapVariable 2 }
|
|
|
|
rldot1dStpTypeAfterReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
perDevice(1),
|
|
mstp(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"New mode of spaning tree supported by the device after the next reset."
|
|
DEFVAL { perDevice }
|
|
::= { rldot1dStp 9 }
|
|
|
|
rldot1dStpMonitorTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..20)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Factor of hello-time during which a port is monotored to determine if it is stable."
|
|
DEFVAL { 10 }
|
|
::= { rldot1dStp 10 }
|
|
|
|
rldot1dStpBpduCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bpdu that need to received for the link to be considered stable."
|
|
DEFVAL { 10 }
|
|
::= { rldot1dStp 11 }
|
|
|
|
rldot1dStpLastChanged OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last time any object in this table was changed
|
|
by SNMP or other local management means."
|
|
REFERENCE
|
|
""
|
|
::= { rldot1dStp 12 }
|
|
|
|
--
|
|
-- rldot1dStpPortTable
|
|
--
|
|
rldot1dStpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rldot1dStpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains extended pair port specific information."
|
|
::= { rldot1dStp 13 }
|
|
|
|
rldot1dStpPortEntry OBJECT-TYPE
|
|
SYNTAX Rldot1dStpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information maintained by every port
|
|
about the Spanning Tree Protocol state for that port."
|
|
INDEX { rldot1dStpPortPort }
|
|
::= { rldot1dStpPortTable 1 }
|
|
|
|
Rldot1dStpPortEntry ::= SEQUENCE {
|
|
rldot1dStpPortPort INTEGER,
|
|
rldot1dStpPortDampEnable TruthValue,
|
|
rldot1dStpPortDampStable TruthValue,
|
|
rldot1dStpPortFilterBpdu INTEGER,
|
|
rldot1dStpPortBpduSent Counter32,
|
|
rldot1dStpPortBpduReceived Counter32,
|
|
rldot1dStpPortRole INTEGER,
|
|
rldot1dStpBpduType INTEGER,
|
|
rldot1dStpPortRestrictedRole TruthValue,
|
|
rldot1dStpPortAutoEdgePort TruthValue,
|
|
rldot1dStpPortLoopback TruthValue,
|
|
rldot1dStpPortBpduOperStatus INTEGER
|
|
}
|
|
|
|
rldot1dStpPortPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the port for which this entry
|
|
contains Spanning Tree Protocol management
|
|
information."
|
|
REFERENCE
|
|
"IEEE 802.1t/D2-1999: Section 9.2.6"
|
|
::= { rldot1dStpPortEntry 1 }
|
|
|
|
rldot1dStpPortDampEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specified if dampening is enabled on this port."
|
|
REFERENCE
|
|
""
|
|
DEFVAL { false }
|
|
::= { rldot1dStpPortEntry 2 }
|
|
|
|
rldot1dStpPortDampStable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specified if the port is stable."
|
|
REFERENCE
|
|
""
|
|
DEFVAL { true }
|
|
::= { rldot1dStpPortEntry 3 }
|
|
|
|
rldot1dStpPortFilterBpdu OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1),
|
|
none(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specified if this port should filter bpdus when stp is disabled."
|
|
REFERENCE
|
|
""
|
|
DEFVAL { none }
|
|
::= { rldot1dStpPortEntry 4 }
|
|
|
|
rldot1dStpPortBpduSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specified the number of bpdu sent from this port."
|
|
REFERENCE
|
|
""
|
|
::= { rldot1dStpPortEntry 5 }
|
|
|
|
rldot1dStpPortBpduReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specified the number of bpdu received in this port."
|
|
REFERENCE
|
|
""
|
|
::= { rldot1dStpPortEntry 6 }
|
|
|
|
rldot1dStpPortRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
disabled(1),
|
|
alternate(2),
|
|
backup(3),
|
|
root(4),
|
|
designated(5)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specified the role of this this port."
|
|
REFERENCE
|
|
""
|
|
::= { rldot1dStpPortEntry 7 }
|
|
|
|
rldot1dStpBpduType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stp(0),
|
|
rstp(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specified the type of BPDU transmitted by this port."
|
|
::= { rldot1dStpPortEntry 8 }
|
|
|
|
rldot1dStpPortRestrictedRole OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If TRUE causes the Port not to be selected as Root Port for the CIST or
|
|
any MSTI, even if it has the best spanning tree priority vector.
|
|
Such a Port will be selected as an Alternate Port after the Root Port
|
|
has been selected."
|
|
REFERENCE
|
|
"IEEE 802.1ad-D3-1: Section 13.24.29"
|
|
DEFVAL { false }
|
|
::= { rldot1dStpPortEntry 9 }
|
|
|
|
rldot1dStpPortAutoEdgePort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If TRUE causes the Port when become up, to enter the blocking state,
|
|
and if during 3 seconds it doesn't receive a BPDU, it will enter
|
|
the forwarding state."
|
|
REFERENCE
|
|
"IEEE 802.1D-2004: Section 17.13.3"
|
|
DEFVAL { false }
|
|
::= { rldot1dStpPortEntry 10 }
|
|
|
|
rldot1dStpPortLoopback OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specified loopback was detected on port.
|
|
Usable for only a short period of time if stp loopback guard is enabled
|
|
(since port enters into shutdown state)."
|
|
REFERENCE
|
|
""
|
|
::= { rldot1dStpPortEntry 11 }
|
|
|
|
rldot1dStpPortBpduOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filter(0),
|
|
flood(1),
|
|
bridge(2),
|
|
stp(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specified BPDU handling operative status for port."
|
|
REFERENCE
|
|
""
|
|
::= { rldot1dStpPortEntry 12 }
|
|
|
|
rldot1dStpPortsEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable / Disable spanning tree on ports by default ."
|
|
DEFVAL { true }
|
|
::= { rldot1dStp 14 }
|
|
|
|
rldot1dStpTaggedFlooding OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"flooding can be done in tagged bpdu ."
|
|
::= { rldot1dStp 15 }
|
|
|
|
rldot1dStpPortBelongToVlanDefault OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default value of rldot1dStpPortMustBelongToVlan ."
|
|
::= { rldot1dStp 16 }
|
|
|
|
rldot1dStpEnableByDefault OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default value of rldot1dStpEnable ."
|
|
::= { rldot1dStp 17 }
|
|
|
|
rldot1dStpPortToDefault OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To order port/s to revert to default setings ."
|
|
::= { rldot1dStp 18 }
|
|
|
|
rldot1dStpSupportedType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
perDevice(1),
|
|
perVlan(2),
|
|
mstp(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of stp supported by the device."
|
|
::= { rldot1dStp 19 }
|
|
|
|
rldot1dStpEdgeportSupportInStp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If EdgePort is supported in stpCompatible mode ."
|
|
::= { rldot1dStp 20 }
|
|
|
|
rldot1dStpFilterBpdu OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specified if the device should filter BPDUs when STP is disabled."
|
|
::= { rldot1dStp 21 }
|
|
|
|
rldot1dStpFloodBpduMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
classic(0),
|
|
bridging(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specified flooding method:
|
|
1 - classic - untagged to all stp disabled ports
|
|
2 - bridging -normal bridging."
|
|
::= { rldot1dStp 22 }
|
|
|
|
rldot1dStpSeparatedBridges OBJECT IDENTIFIER ::= { rldot1dStp 23 }
|
|
|
|
--
|
|
-- rldot1dStpPortBpduGuardTable
|
|
--
|
|
rldot1dStpPortBpduGuardTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rldot1dStpPortBpduGuardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains for each port whether it is bpdu guard ."
|
|
::= { rldot1dStp 24 }
|
|
|
|
rldot1dStpPortBpduGuardEntry OBJECT-TYPE
|
|
SYNTAX Rldot1dStpPortBpduGuardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information maintained by every port
|
|
whether it is bpdu guard."
|
|
INDEX { dot1dBasePort }
|
|
::= { rldot1dStpPortBpduGuardTable 1 }
|
|
|
|
Rldot1dStpPortBpduGuardEntry ::= SEQUENCE {
|
|
rldot1dStpPortBpduGuardEnable TruthValue
|
|
}
|
|
|
|
|
|
rldot1dStpPortBpduGuardEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specified if bpdu guard is enabled on this port."
|
|
REFERENCE
|
|
""
|
|
DEFVAL { false }
|
|
::= { rldot1dStpPortBpduGuardEntry 1 }
|
|
|
|
rldot1dStpLoopbackGuardEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Define if STP loopback guard feature is globally enabled."
|
|
DEFVAL { false }
|
|
::= { rldot1dStp 25 }
|
|
|
|
rldot1dStpSeparatedBridgesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rldot1dStpSeparatedBridgesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Define if separated bridges feature is enabled for each interface."
|
|
::= { rldot1dStpSeparatedBridges 1 }
|
|
|
|
rldot1dStpSeparatedBridgesEntry OBJECT-TYPE
|
|
SYNTAX Rldot1dStpSeparatedBridgesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the contents of each line in the rlSeparatedBridgesTable table."
|
|
INDEX { ifIndex }
|
|
::= { rldot1dStpSeparatedBridgesTable 1 }
|
|
|
|
Rldot1dStpSeparatedBridgesEntry ::= SEQUENCE {
|
|
rldot1dStpSeparatedBridgesPortEnable TruthValue
|
|
}
|
|
|
|
rldot1dStpSeparatedBridgesPortEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the separated bridge feature is enabled on a specified ifIndex."
|
|
DEFVAL { false }
|
|
::= { rldot1dStpSeparatedBridgesEntry 1 }
|
|
|
|
rldot1dStpSeparatedBridgesEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable / Disable Separated Bridges Feature."
|
|
DEFVAL { false }
|
|
::= { rldot1dStpSeparatedBridges 2 }
|
|
|
|
rldot1dStpSeparatedBridgesAutoConfig OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable / Disable Separated Bridges Automatic Configuration."
|
|
DEFVAL { false }
|
|
::= { rldot1dStpSeparatedBridges 3 }
|
|
|
|
|
|
rldot1dStpDisabledPortStateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rldot1dStpDisabledPortStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Define stp port state for each stp disabled interface.
|
|
This is auxiliary MIB emulates stp enabled port behaviour in ASIC for stp disabled port.
|
|
The MIB contains only stp disabled ports entries "
|
|
::= { rldot1dStp 26 }
|
|
|
|
rldot1dStpDisabledPortStateEntry OBJECT-TYPE
|
|
SYNTAX Rldot1dStpDisabledPortStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the contents of each line in the rldot1dStpDisabledPortStateTable table."
|
|
INDEX { dot1dStpPort }
|
|
::= { rldot1dStpDisabledPortStateTable 1 }
|
|
|
|
Rldot1dStpDisabledPortStateEntry ::= SEQUENCE {
|
|
rldot1dStpDisabledPortState INTEGER
|
|
|
|
}
|
|
|
|
|
|
rldot1dStpDisabledPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
blocking(2),
|
|
listening(3),
|
|
learning(4),
|
|
forwarding(5)
|
|
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's stp state as defined by external
|
|
application . This state controls what action a port takes on
|
|
reception of a frame."
|
|
|
|
DEFVAL {forwarding}
|
|
::= { rldot1dStpDisabledPortStateEntry 1 }
|
|
|
|
|
|
rldot1dExtBase OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 3 }
|
|
|
|
rldot1dExtBaseMibVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MIB's version, the current version is 1."
|
|
::= { rldot1dExtBase 1 }
|
|
|
|
rldot1dDeviceCapabilities OBJECT-TYPE
|
|
-- SYNTAX BITS {
|
|
-- rldot1dIGMPSnoopingFilteringServices(0)
|
|
-- ## can perform filtering of
|
|
-- ## individual multicast addresses
|
|
-- ## controlled by IGMP snooping.
|
|
-- rldot1dDefaultFilteringAllServices(1)
|
|
-- ## can perform default filtering
|
|
-- ## behavior for All multicast addresses.
|
|
-- ## controlled by Multicast DB.
|
|
-- rldot1dDefaultFilteringUnregServices(2)
|
|
-- ## can perform default filtering
|
|
-- ## behavior for Unregistered
|
|
-- ## multicast addresses.
|
|
-- ## controlled by Multicast DB.
|
|
-- }
|
|
SYNTAX OCTET STRING (SIZE(1))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the optional parts of private extension of
|
|
IEEE 802.1D and 802.1Q that are implemented by this
|
|
device and are manageable through this MIB.
|
|
Capabilities that are allowed on a per-port basis are
|
|
indicated in dot1dPortCapabilities."
|
|
::= { rldot1dExtBase 2 }
|
|
|
|
|
|
|
|
|
|
rldot1wRStp OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 4 }
|
|
|
|
--
|
|
-- rldot1wStpVlanEdgePortTable
|
|
--
|
|
rldot1wRStpVlanEdgePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rldot1wRStpVlanEdgePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains pair <vlan, port> specific information
|
|
for the Rapid Spanning Tree Protocol."
|
|
::= { rldot1wRStp 1 }
|
|
|
|
rldot1wRStpVlanEdgePortEntry OBJECT-TYPE
|
|
SYNTAX Rldot1wRStpVlanEdgePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information maintained by every pair <vlan, port>
|
|
about the RAPID Spanning Tree Protocol state for that pair."
|
|
INDEX { rldot1wRStpVlanEdgePortVlan, rldot1wRStpVlanEdgePortPort }
|
|
::= { rldot1wRStpVlanEdgePortTable 1 }
|
|
|
|
Rldot1wRStpVlanEdgePortEntry ::= SEQUENCE {
|
|
rldot1wRStpVlanEdgePortVlan INTEGER,
|
|
rldot1wRStpVlanEdgePortPort INTEGER,
|
|
rldot1wRStpEdgePortStatus TruthValue
|
|
}
|
|
|
|
rldot1wRStpVlanEdgePortVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Vlan number that the port belongs to, and for which this entry
|
|
contains Spanning Tree Protocol management information,
|
|
If STP per device then only one value of 1 is allowed.
|
|
If STP per a VLAN then all value of 1..4095 are allowed."
|
|
::= { rldot1wRStpVlanEdgePortEntry 1 }
|
|
|
|
rldot1wRStpVlanEdgePortPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the port for which this entry
|
|
contains Spanning Tree Protocol management information."
|
|
::= { rldot1wRStpVlanEdgePortEntry 2 }
|
|
|
|
rldot1wRStpEdgePortStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this port is an Edge Port or not"
|
|
REFERENCE
|
|
"IEEE 802.1wd6-2000: Section 17.13.3.1 "
|
|
DEFVAL { false }
|
|
::= { rldot1wRStpVlanEdgePortEntry 3 }
|
|
|
|
--
|
|
-- rldot1wStpForceVersionTable
|
|
--
|
|
rldot1wRStpForceVersionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rldot1wRStpForceVersionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains <vlan> specific information
|
|
for the Rapid Spanning Tree Protocol."
|
|
::= { rldot1wRStp 2 }
|
|
|
|
rldot1wRStpForceVersionEntry OBJECT-TYPE
|
|
SYNTAX Rldot1wRStpForceVersionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information maintained by every <vlan>
|
|
about the RAPID Spanning Tree Protocol state for that pair."
|
|
INDEX { rldot1wRStpForceVersionVlan }
|
|
::= { rldot1wRStpForceVersionTable 1 }
|
|
|
|
Rldot1wRStpForceVersionEntry ::= SEQUENCE {
|
|
rldot1wRStpForceVersionVlan INTEGER,
|
|
rldot1wRStpForceVersionState INTEGER
|
|
}
|
|
|
|
rldot1wRStpForceVersionVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Vlan number that the port belongs to, and for which this entry
|
|
contains Spanning Tree Protocol management information,
|
|
If STP per device then only one value of 1 is allowed.
|
|
If STP per a VLAN then all value of 1..4095 are allowed."
|
|
::= { rldot1wRStpForceVersionEntry 1 }
|
|
|
|
rldot1wRStpForceVersionState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this Bridge uses the normal RSTP algorithm,
|
|
or STP Compatibility algorythm:
|
|
0 - STP Compatibility
|
|
2 - Normal RSTP"
|
|
REFERENCE
|
|
"IEEE 802.1wd9-2000: Section 17.16.1 "
|
|
DEFVAL { 2 }
|
|
::= { rldot1wRStpForceVersionEntry 2 }
|
|
|
|
rldot1pPriorityMap OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 5 }
|
|
|
|
rldot1pPriorityMapState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"enable / disable"
|
|
::= { rldot1pPriorityMap 1 }
|
|
|
|
rldot1pPriorityMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rldot1pPriorityMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table hold information the priority maps"
|
|
::= { rldot1pPriorityMap 2 }
|
|
|
|
rldot1pPriorityMapEntry OBJECT-TYPE
|
|
SYNTAX Rldot1pPriorityMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row definition for this table."
|
|
INDEX { rldot1pPriorityMapName }
|
|
::= { rldot1pPriorityMapTable 1 }
|
|
|
|
Rldot1pPriorityMapEntry ::= SEQUENCE {
|
|
rldot1pPriorityMapName DisplayString,
|
|
rldot1pPriorityMapPriority OCTET STRING,
|
|
rldot1pPriorityMapPort PortList,
|
|
rldot1pPriorityMapPortList PortList,
|
|
rldot1pPriorityMapStatus RowStatus
|
|
}
|
|
|
|
rldot1pPriorityMapName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..25))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The map name"
|
|
::= { rldot1pPriorityMapEntry 1 }
|
|
|
|
rldot1pPriorityMapPriority OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The map holding the queue"
|
|
::= { rldot1pPriorityMapEntry 2 }
|
|
|
|
rldot1pPriorityMapPort OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the port that the map, is applied on in config"
|
|
::= { rldot1pPriorityMapEntry 3 }
|
|
|
|
rldot1pPriorityMapPortList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the ports that the map, is applied on in actual"
|
|
::= { rldot1pPriorityMapEntry 4 }
|
|
|
|
rldot1pPriorityMapStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the table entry. It's used to delete an entry"
|
|
::= { rldot1pPriorityMapEntry 5 }
|
|
|
|
|
|
|
|
|
|
|
|
rldot1sMstp OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 6 }
|
|
|
|
--
|
|
-- The Multiple Spanning Tree Instance Table
|
|
--
|
|
rldot1sMstpInstanceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rldot1sMstpInstanceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains Mstp instance specific information
|
|
for the Multiple Spanning Tree Protocol."
|
|
::= { rldot1sMstp 1 }
|
|
|
|
rldot1sMstpInstanceEntry OBJECT-TYPE
|
|
SYNTAX Rldot1sMstpInstanceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information maintained by every instance
|
|
about the multiple Spanning Tree Protocol state for
|
|
that instance."
|
|
INDEX { rldot1sMstpInstanceId }
|
|
::= { rldot1sMstpInstanceTable 1 }
|
|
|
|
Rldot1sMstpInstanceEntry ::= SEQUENCE {
|
|
rldot1sMstpInstanceId INTEGER,
|
|
rldot1sMstpInstanceEnable TruthValue,
|
|
rldot1sMstpInstanceTimeSinceTopologyChange TimeTicks,
|
|
rldot1sMstpInstanceTopChanges Counter,
|
|
rldot1sMstpInstanceDesignatedRoot BridgeId,
|
|
rldot1sMstpInstanceRootCost INTEGER,
|
|
rldot1sMstpInstanceRootPort INTEGER,
|
|
rldot1sMstpInstanceMaxAge Timeout,
|
|
rldot1sMstpInstanceHelloTime Timeout,
|
|
rldot1sMstpInstanceHoldTime INTEGER,
|
|
rldot1sMstpInstanceForwardDelay Timeout,
|
|
rldot1sMstpInstancePriority INTEGER,
|
|
rldot1sMstpInstanceRemainingHopes INTEGER
|
|
}
|
|
|
|
rldot1sMstpInstanceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Instance index."
|
|
::= { rldot1sMstpInstanceEntry 1 }
|
|
|
|
rldot1sMstpInstanceEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether this Instance is STP enable or disable"
|
|
REFERENCE
|
|
" ?? "
|
|
::= { rldot1sMstpInstanceEntry 2 }
|
|
|
|
rldot1sMstpInstanceTimeSinceTopologyChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time (in hundredths of a second) since the
|
|
last time a topology change was detected by the
|
|
Mstp Instance ."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.8.1.1.3"
|
|
::= { rldot1sMstpInstanceEntry 3 }
|
|
|
|
rldot1sMstpInstanceTopChanges OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of topology changes detected by
|
|
this Instance since the management entity was last
|
|
reset or initialized."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.8.1.1.3"
|
|
::= { rldot1sMstpInstanceEntry 4 }
|
|
|
|
rldot1sMstpInstanceDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bridge identifier of the root of the spanning
|
|
tree as determined by the Muliple Spanning Tree Protocol
|
|
as executed by this node. This value is used as
|
|
the Root Identifier parameter in all Configuration
|
|
Bridge PDUs originated by this node."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.1"
|
|
::= { rldot1sMstpInstanceEntry 5 }
|
|
|
|
rldot1sMstpInstanceRootCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cost of the path to the root as seen from
|
|
this bridge."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.2"
|
|
::= { rldot1sMstpInstanceEntry 6 }
|
|
|
|
rldot1sMstpInstanceRootPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the port which offers the
|
|
lowest cost path from this bridge to the root
|
|
bridge."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.3"
|
|
::= { rldot1sMstpInstanceEntry 7 }
|
|
|
|
rldot1sMstpInstanceMaxAge OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum age of Spanning Tree Protocol
|
|
information learned from the network on any port
|
|
before it is discarded, in units of hundredths of
|
|
a second. This is the actual value that this
|
|
bridge is currently using."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.4"
|
|
::= { rldot1sMstpInstanceEntry 8 }
|
|
|
|
rldot1sMstpInstanceHelloTime OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time between the transmission of
|
|
Configuration bridge PDUs by this node on any port
|
|
when it is the root of the spanning tree or trying
|
|
to become so, in units of hundredths of a second.
|
|
This is the actual value that this bridge is
|
|
currently using."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.5"
|
|
::= { rldot1sMstpInstanceEntry 9 }
|
|
|
|
rldot1sMstpInstanceHoldTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This time value determines the interval length
|
|
during which no more than two Configuration bridge
|
|
PDUs shall be transmitted by this node, in units
|
|
of hundredths of a second."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.14"
|
|
::= { rldot1sMstpInstanceEntry 10 }
|
|
|
|
rldot1sMstpInstanceForwardDelay OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This time value, measured in units of hundredths
|
|
of a second, controls how fast a port changes its
|
|
spanning state when moving towards the Forwarding
|
|
state. The value determines how long the port
|
|
stays in each of the Listening and Learning
|
|
states, which precede the Forwarding state. This
|
|
value is also used, when a topology change has
|
|
been detected and is underway, to age all dynamic
|
|
entries in the Forwarding Database. [Note that
|
|
this value is the one that this bridge is
|
|
currently using, in contrast to
|
|
dot1dStpBridgeForwardDelay which is the value that
|
|
this bridge and all others would start using
|
|
if/when this bridge were to become the root.]"
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.6"
|
|
::= { rldot1sMstpInstanceEntry 11 }
|
|
|
|
rldot1sMstpInstancePriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..61440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the write-able portion of the Bridge
|
|
ID, i.e., the first four bits of the first octet
|
|
of the (8 octet long) Bridge ID.The value is a product
|
|
of 4096. The next 12 bit are the msti id .
|
|
The other (last) 6 octets of the Bridge ID are given
|
|
by the value of dot1dBaseBridgeAddress."
|
|
REFERENCE
|
|
"IEEE 802.1S-2001: Section 13.24.2"
|
|
::= {rldot1sMstpInstanceEntry 12 }
|
|
|
|
rldot1sMstpInstanceRemainingHopes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This count value determines the amount of hopes
|
|
the information transmited by this bridge on this
|
|
instance can travel."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.14"
|
|
::= { rldot1sMstpInstanceEntry 13 }
|
|
|
|
--
|
|
-- rldot1sMstpInstancePortTable
|
|
--
|
|
rldot1sMstpInstancePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rldot1sMstpInstancePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains pair <msti, port> specific information
|
|
for the Spanning Tree Protocol."
|
|
::= { rldot1sMstp 2 }
|
|
|
|
rldot1sMstpInstancePortEntry OBJECT-TYPE
|
|
SYNTAX Rldot1sMstpInstancePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information maintained by every pair <msti, port>
|
|
about the Spanning Tree Protocol state for that pair."
|
|
INDEX { rldot1sMstpInstancePortMstiId, rldot1sMstpInstancePortPort }
|
|
::= { rldot1sMstpInstancePortTable 1 }
|
|
|
|
Rldot1sMstpInstancePortEntry ::= SEQUENCE {
|
|
rldot1sMstpInstancePortMstiId INTEGER,
|
|
rldot1sMstpInstancePortPort INTEGER,
|
|
rldot1sMstpInstancePortPriority INTEGER,
|
|
rldot1sMstpInstancePortState INTEGER,
|
|
rldot1sMstpInstancePortEnable INTEGER,
|
|
rldot1sMstpInstancePortPathCost INTEGER,
|
|
rldot1sMstpInstancePortDesignatedRoot BridgeId,
|
|
rldot1sMstpInstancePortDesignatedCost INTEGER,
|
|
rldot1sMstpInstancePortDesignatedBridge BridgeId,
|
|
rldot1sMstpInstancePortDesignatedPort OCTET STRING,
|
|
rldot1sMstpInstancePortForwardTransitions Counter,
|
|
rldot1sMStpInstancePortAdminPathCost INTEGER,
|
|
rldot1sMStpInstancePortRole INTEGER
|
|
|
|
}
|
|
|
|
rldot1sMstpInstancePortMstiId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Vlan group number that the port belongs to, and for which this entry
|
|
contains Spanning Tree Protocol management
|
|
information."
|
|
REFERENCE
|
|
"IEEE 802.1s/D11-2001 "
|
|
::= { rldot1sMstpInstancePortEntry 1 }
|
|
|
|
rldot1sMstpInstancePortPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the port for which this entry
|
|
contains Spanning Tree Protocol management
|
|
information."
|
|
REFERENCE
|
|
"IEEE 802.1t/D2-1999: Section 9.2.6"
|
|
::= { rldot1sMstpInstancePortEntry 2 }
|
|
|
|
rldot1sMstpInstancePortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..240)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the priority field which is
|
|
contained in the more significant 4 bits of the most
|
|
significant octet of the (2 octet long) Port ID.
|
|
The value is a product of 16.
|
|
The other octet of the Port ID is given by the value
|
|
of rldot1dStpVlanGroupPort."
|
|
REFERENCE
|
|
"IEEE 802.1t/D2-1999: Section 9.2.6"
|
|
::= { rldot1sMstpInstancePortEntry 3 }
|
|
|
|
rldot1sMstpInstancePortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
blocking(2),
|
|
listening(3),
|
|
learning(4),
|
|
forwarding(5),
|
|
broken(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's current state as defined by application of
|
|
the Spanning Tree Protocol. This state controls what
|
|
action a port takes on reception of a frame.
|
|
If the bridge has detected a port that is malfunctioning
|
|
it will place that port into the broken(6) state. For ports
|
|
which are disabled (see dot1dStpVlanPortEnable), this object
|
|
will have a value of disabled(1)."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.2"
|
|
::= { rldot1sMstpInstancePortEntry 4 }
|
|
|
|
rldot1sMstpInstancePortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled/disabled status of the port."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.2"
|
|
::= { rldot1sMstpInstancePortEntry 5 }
|
|
|
|
rldot1sMstpInstancePortPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..200000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The contribution of this port to the path cost of
|
|
paths towards the spanning tree root which include
|
|
this port. 802.1D-1990 recommends that the
|
|
default value of this parameter be in inverse
|
|
proportion to the speed of the attached LAN."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.3"
|
|
::= { rldot1sMstpInstancePortEntry 6 }
|
|
|
|
rldot1sMstpInstancePortDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique Bridge Identifier of the Bridge
|
|
recorded as the Root in the Configuration BPDUs
|
|
transmitted by the Designated Bridge for the
|
|
segment to which the port is attached."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.4"
|
|
::= { rldot1sMstpInstancePortEntry 7 }
|
|
|
|
rldot1sMstpInstancePortDesignatedCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path cost of the Designated Port of the
|
|
segment connected to this port. This value is
|
|
compared to the Root Path Cost field in received
|
|
bridge PDUs."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.5"
|
|
::= { rldot1sMstpInstancePortEntry 8 }
|
|
|
|
rldot1sMstpInstancePortDesignatedBridge OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Bridge Identifier of the bridge which this
|
|
port considers to be the Designated Bridge for
|
|
this port's segment."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.6"
|
|
::= { rldot1sMstpInstancePortEntry 9 }
|
|
|
|
rldot1sMstpInstancePortDesignatedPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port Identifier of the port on the Designated
|
|
Bridge for this port's segment."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.7"
|
|
::= { rldot1sMstpInstancePortEntry 10 }
|
|
|
|
rldot1sMstpInstancePortForwardTransitions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this port has transitioned
|
|
from the Learning state to the Forwarding state."
|
|
::= { rldot1sMstpInstancePortEntry 11 }
|
|
|
|
rldot1sMStpInstancePortAdminPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER (0..200000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administratively assigned value for the contribution
|
|
of this port to the path cost of paths towards the spanning
|
|
tree root.
|
|
|
|
Writing a value of '0' assigns the automatically calculated
|
|
default Path Cost value to the port. If the default Path
|
|
Cost is being used, this object returns '0' when read.
|
|
|
|
This complements the object dot1dStpPortPathCost, which
|
|
returns the operational value of the path cost."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: Section 8.5.5.3"
|
|
::= { rldot1sMstpInstancePortEntry 12 }
|
|
|
|
rldot1sMStpInstancePortRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
disabled(1),
|
|
alternate(2),
|
|
backup(3),
|
|
root(4),
|
|
designated(5),
|
|
master(6)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the role of this this port."
|
|
REFERENCE
|
|
""
|
|
::= { rldot1sMstpInstancePortEntry 13 }
|
|
|
|
rldot1sMstpMaxHopes OBJECT-TYPE
|
|
SYNTAX INTEGER (1..40)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Max number of hopes that an MST BPDU will travel inside a region."
|
|
DEFVAL { 20 }
|
|
::= { rldot1sMstp 3 }
|
|
|
|
rldot1sMstpConfigurationName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The active configuration name as will be caried in MST BPDU's."
|
|
::= { rldot1sMstp 4 }
|
|
|
|
rldot1sMstpRevisionLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The active revision level."
|
|
DEFVAL { 0 }
|
|
::= { rldot1sMstp 5 }
|
|
|
|
--
|
|
-- rldot1sMstpVlanTable
|
|
--
|
|
rldot1sMstpVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rldot1sMstpVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about the alocation of vlans to groups."
|
|
::= { rldot1sMstp 6 }
|
|
|
|
rldot1sMstpVlanEntry OBJECT-TYPE
|
|
SYNTAX Rldot1sMstpVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information maintained by every vlan
|
|
about the group it belongs to."
|
|
INDEX { rldot1sMstpVlan }
|
|
::= { rldot1sMstpVlanTable 1 }
|
|
|
|
Rldot1sMstpVlanEntry ::= SEQUENCE {
|
|
rldot1sMstpVlan INTEGER,
|
|
rldot1sMstpGroup INTEGER,
|
|
rldot1sMstpPendingGroup INTEGER
|
|
|
|
}
|
|
|
|
rldot1sMstpVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlan number of the vlan for which this entry
|
|
contains Spanning Tree Protocol management
|
|
information."
|
|
REFERENCE
|
|
"IEEE 802.1s/D11-2001: Section 13.7"
|
|
::= { rldot1sMstpVlanEntry 1 }
|
|
|
|
rldot1sMstpGroup OBJECT-TYPE
|
|
SYNTAX INTEGER (0..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifid the active group number this vlan belonges to."
|
|
REFERENCE
|
|
""
|
|
DEFVAL { 0 }
|
|
::= { rldot1sMstpVlanEntry 2 }
|
|
|
|
rldot1sMstpPendingGroup OBJECT-TYPE
|
|
SYNTAX INTEGER (0..64)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifid the pending group number this vlan belonges to."
|
|
REFERENCE
|
|
""
|
|
DEFVAL { 0 }
|
|
::= { rldot1sMstpVlanEntry 3 }
|
|
|
|
--
|
|
-- rldot1sMstpExtPortTable
|
|
--
|
|
rldot1sMstpExtPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rldot1sMstpExtPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains MSTP information about ports of the CIST."
|
|
::= { rldot1sMstp 7 }
|
|
|
|
rldot1sMstpExtPortEntry OBJECT-TYPE
|
|
SYNTAX Rldot1sMstpExtPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information maintained by every port
|
|
of the CIST."
|
|
INDEX { rldot1sMstpExtPortPort }
|
|
::= { rldot1sMstpExtPortTable 1 }
|
|
|
|
Rldot1sMstpExtPortEntry ::= SEQUENCE {
|
|
rldot1sMstpExtPortPort INTEGER,
|
|
rldot1sMstpExtPortInternalOperPathCost INTEGER,
|
|
rldot1sMstpExtPortDesignatedRegionalRoot BridgeId,
|
|
rldot1sMstpExtPortDesignatedRegionalCost INTEGER,
|
|
rldot1sMstpExtPortBoundary TruthValue,
|
|
rldot1sMstpExtPortInternalAdminPathCost INTEGER
|
|
|
|
}
|
|
rldot1sMstpExtPortPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the port for which this entry
|
|
contains Spanning Tree Protocol management
|
|
information."
|
|
REFERENCE
|
|
"IEEE 802.1t/D2-1999: Section 9.2.6"
|
|
::= { rldot1sMstpExtPortEntry 1 }
|
|
|
|
rldot1sMstpExtPortInternalOperPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..200000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The contribution of this port to the path cost of
|
|
paths towards the spanning tree regional root which
|
|
include this port. 802.1S-2002 recommends that the
|
|
default value of this parameter be in inverse
|
|
proportion to the speed of the attached LAN."
|
|
::= { rldot1sMstpExtPortEntry 2 }
|
|
|
|
rldot1sMstpExtPortDesignatedRegionalRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique Bridge Identifier of the Bridge
|
|
recorded as the Root in the Configuration BPDUs
|
|
transmitted by the Designated Bridge for the
|
|
segment to which the port is attached."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.4"
|
|
::= { rldot1sMstpExtPortEntry 3 }
|
|
|
|
rldot1sMstpExtPortDesignatedRegionalCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The regional path cost of the Designated Port of the
|
|
segment connected to this port. This value is
|
|
compared to the Root Path Cost field in received
|
|
bridge PDUs."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.5"
|
|
::= { rldot1sMstpExtPortEntry 4 }
|
|
|
|
rldot1sMstpExtPortBoundary OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indication if the port is conented to to a lan segment
|
|
outside or inside the region."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.5"
|
|
::= { rldot1sMstpExtPortEntry 5 }
|
|
|
|
rldot1sMstpExtPortInternalAdminPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER (0..200000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administratively assigned value for the contribution
|
|
of this port to the path cost of paths towards the spanning
|
|
tree root.
|
|
|
|
Writing a value of '0' assigns the automatically calculated
|
|
default Path Cost value to the port. If the default Path
|
|
Cost is being used, this object returns '0' when read.
|
|
|
|
This complements the object dot1dStpPortPathCost, which
|
|
returns the operational value of the path cost."
|
|
|
|
::= { rldot1sMstpExtPortEntry 6 }
|
|
|
|
rldot1sMstpDesignatedMaxHopes OBJECT-TYPE
|
|
SYNTAX INTEGER (1..40)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Max number of hopes that an MST BPDU will travel inside a region."
|
|
::= { rldot1sMstp 8 }
|
|
|
|
rldot1sMstpRegionalRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Regional Root Identifier (13.16.4).
|
|
The Bridge Identifier of the current CIST Regional Root."
|
|
REFERENCE
|
|
"IEEE 802.1S-2002: Section 13.16.4"
|
|
::= { rldot1sMstp 9 }
|
|
|
|
rldot1sMstpRegionalRootCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CIST path cost from the transmitting Bridge to the
|
|
CIST Regional Root."
|
|
REFERENCE
|
|
"IEEE 802.1S-2002: Section 12.8.1.1.3"
|
|
::= { rldot1sMstp 10 }
|
|
|
|
rldot1sMstpPendingConfigurationName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pending configuration name."
|
|
::= { rldot1sMstp 11 }
|
|
|
|
rldot1sMstpPendingRevisionLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pending revision level."
|
|
DEFVAL { 0 }
|
|
::= { rldot1sMstp 12 }
|
|
|
|
rldot1sMstpPendingAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
copyPendingActive(1),
|
|
copyActivePending(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The action to be done with the pending configuration.
|
|
copyPendingActive - to copy the pending mst configuration to the active one.
|
|
copyActivePending - to copy the active mst configuration to the pending one. "
|
|
::= { rldot1sMstp 13 }
|
|
|
|
rldot1sMstpRemainingHops OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This count value determines the amount of hops
|
|
the information transmitted by this bridge can travel."
|
|
::= { rldot1sMstp 14 }
|
|
|
|
--
|
|
-- rldot1sMstpInstanceVlanTable
|
|
--
|
|
rldot1sMstpInstanceVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rldot1sMstpInstanceVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains vlan lists per MSTP instances."
|
|
::= { rldot1sMstp 15 }
|
|
|
|
rldot1sMstpInstanceVlanEntry OBJECT-TYPE
|
|
SYNTAX Rldot1sMstpInstanceVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The entry contains vlan lists per specific MSTP instance."
|
|
INDEX { rldot1sMstpInstanceVlanId }
|
|
::= { rldot1sMstpInstanceVlanTable 1 }
|
|
|
|
Rldot1sMstpInstanceVlanEntry::= SEQUENCE {
|
|
rldot1sMstpInstanceVlanId INTEGER,
|
|
rldot1sMstpInstanceVlanId1To1024 VlanList1,
|
|
rldot1sMstpInstanceVlanId1025To2048 VlanList2,
|
|
rldot1sMstpInstanceVlanId2049To3072 VlanList3,
|
|
rldot1sMstpInstanceVlanId3073To4094 VlanList4
|
|
}
|
|
|
|
rldot1sMstpInstanceVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifiy the instance number."
|
|
::= { rldot1sMstpInstanceVlanEntry 1 }
|
|
|
|
rldot1sMstpInstanceVlanId1To1024 OBJECT-TYPE
|
|
SYNTAX VlanList1
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"first VlanId List of specific MSTP instance."
|
|
::= { rldot1sMstpInstanceVlanEntry 2 }
|
|
|
|
rldot1sMstpInstanceVlanId1025To2048 OBJECT-TYPE
|
|
SYNTAX VlanList2
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"second VlanId List of specific MSTP instance."
|
|
::= { rldot1sMstpInstanceVlanEntry 3 }
|
|
|
|
rldot1sMstpInstanceVlanId2049To3072 OBJECT-TYPE
|
|
SYNTAX VlanList3
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"third VlanId List of specific MSTP instance."
|
|
::= { rldot1sMstpInstanceVlanEntry 4 }
|
|
|
|
rldot1sMstpInstanceVlanId3073To4094 OBJECT-TYPE
|
|
SYNTAX VlanList4
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"fourth VlanId List of specific MSTP instance."
|
|
::= { rldot1sMstpInstanceVlanEntry 5 }
|
|
|
|
rldot1dTpAgingTime OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 7 }
|
|
|
|
rldot1dTpAgingTimeMin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The min timeout period in seconds for aging out
|
|
dynamically learned forwarding information."
|
|
REFERENCE
|
|
"P802.1d/D9, July 14, 1989: Section 6.7.1.1.3"
|
|
::= { rldot1dTpAgingTime 1 }
|
|
|
|
rldot1dTpAgingTimeMax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max timeout period in seconds for aging out
|
|
dynamically learned forwarding information."
|
|
REFERENCE
|
|
"P802.1d/D9, July 14, 1989: Section 6.7.1.1.3"
|
|
::= { rldot1dTpAgingTime 2 }
|
|
|
|
|
|
|
|
|
|
END
|
|
|