mirror of
https://github.com/librenms/librenms.git
synced 2024-09-21 18:38:25 +00:00
11147d3bbf
* Extract DiscoveryItem and move some things to better places. Extract model class Fix up model construction. I have problem with construction... Makeshift model working. Switch constructor to factory. discover() and create() Support legacy discovery. Remove uneeded custom pollers Remove netonix custom detection as we try ucd on all os now. Add a few yaml procs. Fix a couple things. More processor discovery conversions Move Calix e7 to standard hrProcessorLoad, but it doesn't fully implement the HR-MIB, move things around to make it work. Add a few yaml procs. Fix a couple things. Correct some stupid mib stuff. Move more, drop php 5.3 Add netscaler which uses string indexes. Port fiberhome to yaml and use skip_values More conversions. BroadcomProcessorUsage Trait Serveriron and Ironware share some mibs. Create a common abstract os for them. Add yaml support for mib specification in each data entry Make legacy discover_processor() set 0 for hrDeviceIndex Untangle Dell switch OS processors Use use shared OS for groups if they don't have a specific group. fix silly mib mistake Make index optional Move HR and UCD to Traits and out of Processor. * forgot to update the fortiswitch index * Make sgos and avaya-ers match the old index. * fix comware test data * fix merge errors * fix dsm and remove pointless empty modules * file not found exception is in the wrong place. * Updated processor development docs
1057 lines
33 KiB
Plaintext
1057 lines
33 KiB
Plaintext
--
|
|
-- Title: Switch System MIB.
|
|
--
|
|
|
|
SYSTEM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
DisplayString, TEXTUAL-CONVENTION, TruthValue
|
|
FROM SNMPv2-TC
|
|
Integer32, OBJECT-TYPE, OBJECT-IDENTITY,
|
|
MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
SwSensorIndex, SwPortIndex
|
|
FROM Brocade-TC
|
|
sw
|
|
FROM SWBASE-MIB;
|
|
|
|
swSystem MODULE-IDENTITY
|
|
LAST-UPDATED "1104151830Z" -- Apr 15, 20i11 6:30pm
|
|
ORGANIZATION "Brocade Communications Systems, Inc.,"
|
|
CONTACT-INFO "Customer Support Group
|
|
Brocade Communications Systems,
|
|
130 Holger Way,
|
|
San Jose, CA 95134 U.S.A
|
|
Tel: +1-408-333-8000
|
|
Fax: +1-408-333-8101
|
|
Email: support@Brocade.COM
|
|
WEB: www.brocade.com"
|
|
|
|
|
|
DESCRIPTION "The MIB module is for system information.
|
|
Copyright (c) 1996-2003 Brocade Communications Systems, Inc.
|
|
All rights reserved."
|
|
REVISION "1104151830Z" -- Apr 15, 2011 6:30pm
|
|
DESCRIPTION "Initial version of this module."
|
|
REVISION "1204301800Z" -- Apr 30, 2012 6:00pm
|
|
DESCRIPTION "Added swID mib object."
|
|
::= { sw 1 }
|
|
|
|
swFabric OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The OID sub-tree for swFabric group."
|
|
::= { sw 2 }
|
|
|
|
-- 3..7 are reserved; should not be used for new features.
|
|
|
|
swFCport OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The OID sub-tree for swFCport group."
|
|
::= { sw 6 }
|
|
|
|
swEvent OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The OID sub-tree for swEvent group."
|
|
::= { sw 8 }
|
|
|
|
FcPortFlag ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Represents the port status for a FC Flag. Currently this will indicate
|
|
if the port is virtual or physical."
|
|
SYNTAX BITS {
|
|
physical (0),
|
|
virtual (1)
|
|
}
|
|
|
|
-- Fabric member information
|
|
--
|
|
swVfId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Virtual fabric id."
|
|
::= { swFabric 15 }
|
|
-- End of Fabric member information
|
|
--
|
|
--
|
|
-- the System Group (sw)
|
|
--
|
|
|
|
swCurrentDate OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current date information in displayable textual
|
|
format."
|
|
::= { swSystem 1 }
|
|
|
|
swBootDate OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The date and time when the system last booted, in
|
|
displayable textual format."
|
|
::= { swSystem 2 }
|
|
|
|
swFWLastUpdated OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The information indicates the date when the firmware
|
|
was last updated, in displayable textual format."
|
|
::= { swSystem 3 }
|
|
|
|
swFlashLastUpdated OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The information indicates the date when the FLASH
|
|
was last updated, in displayable textual format."
|
|
::= { swSystem 4 }
|
|
|
|
swBootPromLastUpdated OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The information indicates the date when the boot PROM
|
|
was last updated, in displayable textual format."
|
|
::= { swSystem 5 }
|
|
|
|
swFirmwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..24))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current version of the firwmare."
|
|
::= { swSystem 6 }
|
|
|
|
swOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
online (1),
|
|
offline (2),
|
|
testing (3),
|
|
faulty (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current operational status of the switch.
|
|
The states are as follow:
|
|
o online(1) means the switch is accessible by an external
|
|
port;
|
|
o offline(2) means the switch is not accessible;
|
|
o testing(3) means the switch is in a built-in test mode
|
|
and is not accessible by an external port;
|
|
o faulty(4) means the switch is not operational."
|
|
::= { swSystem 7 }
|
|
|
|
-- 8..9 are reserved; should not be used for new features.
|
|
|
|
swSsn OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The soft serial number of the switch."
|
|
::= { swSystem 10 }
|
|
|
|
|
|
-- FLASH administration
|
|
-- the next 5 objects are related to firmware or config file management.
|
|
--
|
|
-- The underlying method in the transfer of the firmware or config file
|
|
-- is based on either FTP or remote shell.
|
|
-- If a password is provided, then FTP is used.
|
|
-- If NO password is provided, then remote shell is used.
|
|
--
|
|
-- 2 steps to manage firmware or switch config file in the switch FLASH,
|
|
-- (A1) set swFlashDLHost.0, swFlashDLUser.0 and swFlashDLFile.0 to
|
|
-- appropriate
|
|
-- host IP address in user dot notation (e.g. 192.168.1.7),
|
|
-- user name (e.g. "administrator"), and
|
|
-- file name of the firmware or config file (e.g. "/home/fcswh/v2.2")
|
|
-- respectively;
|
|
-- (A2) set swFlashDLPassword.0 to an appropriate value (e.g. "secret")
|
|
-- if FTP is the desired method of transfer;
|
|
-- (B) set swFlashDLAdmStatus.0 to swFwUpgrade(2), swCfUpload(3),
|
|
-- or swCfDownload(4) accordingly.
|
|
--
|
|
|
|
swFlashDLOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown (0),
|
|
swCurrent (1),
|
|
swFwUpgraded (2),
|
|
swCfUploaded (3),
|
|
swCfDownloaded (4),
|
|
swFwCorrupted (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operational status of the FLASH.
|
|
The operational states are as follow:
|
|
o swCurrent(1) indicates that the FLASH contains the
|
|
current firmware image or config file;
|
|
o swFwUpgraded(2) state indicates that it contains the image
|
|
upgraded from the swFlashDLHost.0.;
|
|
o swCfUploaded(3) state indicates that the switch configuration
|
|
file has been uploaded to the host; and
|
|
o swCfDownloaded(4) state indicates that the switch
|
|
configuration file has been downloaded from the host.
|
|
o swFwCorrupted (5) state indicates that the firmware in the
|
|
FLASH of the switch is corrupted."
|
|
::= { swSystem 11 }
|
|
|
|
swFlashDLAdmStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
swCurrent (1),
|
|
swFwUpgrade (2),
|
|
swCfUpload (3),
|
|
swCfDownload (4),
|
|
swFwCorrupted (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The state of the FLASH.
|
|
o swCurrent(1) indicates that the FLASH contains the
|
|
current firmware image or config file;
|
|
o swFwUpgrade(2) means that the firmware in the FLASH is to be
|
|
upgraded from the host specified;
|
|
o swCfUpload(3) means that the switch config file is to be
|
|
uploaded to the host specified; or
|
|
o swCfDownload(4) means that the switch config file is to be
|
|
downloaded from the host specified.
|
|
o swFwCorrupted(5) state indicates that the firmware in the
|
|
FLASH is corrupted. This value is for informational purpose
|
|
only. However, set of swFlashDLAdmStatus to this value is
|
|
not allowed.
|
|
|
|
The host is specified in swFlashDLHost.0. In addition,
|
|
user name is specified in swFlashDLUser.0, and
|
|
the file name specified in swFlashDLFile.0.
|
|
|
|
Reference the user manual on the following commands,
|
|
o firmwareDownload,
|
|
o configUpload, and
|
|
o configDownload."
|
|
::= { swSystem 12 }
|
|
|
|
-- 13..17 are reserved
|
|
|
|
swBeaconOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on (1),
|
|
off (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current operational status of the switch beacon.
|
|
When the beacon is on, the LEDs on the front panel
|
|
of the switch run alternately from left to right
|
|
and right to left. The color is yellow.
|
|
When the beacon is off, each LED will be in their
|
|
its regular status indicating color and state."
|
|
::= { swSystem 18 }
|
|
|
|
swBeaconAdmStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on (1),
|
|
off (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The desired status of the switch beacon.
|
|
When the beacon is set to on, the LEDs on the front
|
|
panel of the switch run alternately from left to right
|
|
and right to left. The color is yellow.
|
|
When the beacon is set to off, each LED will be in
|
|
its regular status indicating color and state."
|
|
::= { swSystem 19 }
|
|
|
|
swDiagResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sw-ok (1),
|
|
sw-faulty (2),
|
|
sw-embedded-port-fault (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The result of the power-on startup (POST)
|
|
diagnostics."
|
|
::= { swSystem 20 }
|
|
|
|
-- operating environment sensors (temperature, fan, power supply...)
|
|
swNumSensors OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of sensors inside the switch."
|
|
::= { swSystem 21 }
|
|
|
|
swSensorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwSensorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table of sensor entries."
|
|
::= { swSystem 22 }
|
|
|
|
swSensorEntry OBJECT-TYPE
|
|
SYNTAX SwSensorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of the sensor information."
|
|
INDEX { swSensorIndex }
|
|
::= { swSensorTable 1 }
|
|
|
|
SwSensorEntry ::= SEQUENCE {
|
|
swSensorIndex SwSensorIndex,
|
|
swSensorType INTEGER,
|
|
swSensorStatus INTEGER,
|
|
swSensorValue Integer32,
|
|
swSensorInfo DisplayString
|
|
}
|
|
|
|
swSensorIndex OBJECT-TYPE
|
|
SYNTAX SwSensorIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the sensor."
|
|
::= { swSensorEntry 1 }
|
|
|
|
swSensorType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
temperature (1),
|
|
fan (2),
|
|
power-supply (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the sensor type."
|
|
::= { swSensorEntry 2 }
|
|
|
|
swSensorStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown (1),
|
|
faulty (2),
|
|
below-min (3),
|
|
nominal (4),
|
|
above-max (5),
|
|
absent (6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current status of the sensor."
|
|
::= { swSensorEntry 3 }
|
|
|
|
swSensorValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current value (reading) of the sensor.
|
|
The value, -2147483648, represents an unknown quantity.
|
|
It also means that the sensor does not have the capability to
|
|
measure the actual value. In V2.0, the temperature sensor
|
|
value will be in Celsius; the fan value will be in RPM
|
|
(revolution per minute); and the power supply sensor reading
|
|
will be unknown."
|
|
::= { swSensorEntry 4 }
|
|
|
|
swSensorInfo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Additional displayable information on the sensor.
|
|
In V2.x, it contains the sensor type and number
|
|
in textual format. For example, 'Temp 3', 'Fan 6'."
|
|
::= { swSensorEntry 5 }
|
|
|
|
-- 23 is reserved
|
|
|
|
swID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the logical switch (0/1)."
|
|
::= { swSystem 24 }
|
|
|
|
swEtherIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the Ethernet interface of this logical
|
|
switch."
|
|
::= { swSystem 25 }
|
|
|
|
swEtherIPMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Mask of the Ethernet interface of this logical switch."
|
|
::= { swSystem 26}
|
|
|
|
-- 27..28 are reserved
|
|
|
|
swIPv6Address OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPV6 address."
|
|
::= { swSystem 29 }
|
|
|
|
swIPv6Status OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tentative (1),
|
|
preferred (2),
|
|
ipdeprecated (3),
|
|
inactive (4)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The current status of ipv6 address."
|
|
::= { swSystem 30 }
|
|
|
|
--
|
|
-- End of System Group
|
|
--
|
|
|
|
--
|
|
-- Fibre Channel Port Group
|
|
-- This group contains information about the physical state,
|
|
-- operational status, performance and error statistics of each
|
|
-- Fibre Channel port on the switch. A Fibre Channel port is one which
|
|
-- supports the Fibre Channel protocol. E.g. F_Port, E_Port, FL_Port.
|
|
--
|
|
-- 1 reserved
|
|
|
|
swFCPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwFCPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table that contains, one entry for each switch port,
|
|
configuration and service parameters of the port."
|
|
::= { swFCport 2 }
|
|
|
|
swFCPortEntry OBJECT-TYPE
|
|
SYNTAX SwFCPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing the configuration and service
|
|
parameters of the switch port."
|
|
INDEX { swFCPortIndex }
|
|
::= { swFCPortTable 1 }
|
|
|
|
SwFCPortEntry ::= SEQUENCE {
|
|
swFCPortIndex SwPortIndex,
|
|
swFCPortType INTEGER,
|
|
swFCPortPhyState INTEGER,
|
|
swFCPortOpStatus INTEGER,
|
|
swFCPortAdmStatus INTEGER,
|
|
|
|
swFCPortLinkState INTEGER,
|
|
swFCPortTxType INTEGER,
|
|
|
|
-- the rest is mapped to gstat_t
|
|
swFCPortTxWords Counter32,
|
|
swFCPortRxWords Counter32,
|
|
swFCPortTxFrames Counter32,
|
|
swFCPortRxFrames Counter32,
|
|
swFCPortRxC2Frames Counter32,
|
|
swFCPortRxC3Frames Counter32,
|
|
swFCPortRxLCs Counter32,
|
|
swFCPortRxMcasts Counter32,
|
|
swFCPortTooManyRdys Counter32,
|
|
swFCPortNoTxCredits Counter32,
|
|
swFCPortRxEncInFrs Counter32,
|
|
swFCPortRxCrcs Counter32,
|
|
swFCPortRxTruncs Counter32,
|
|
swFCPortRxTooLongs Counter32,
|
|
swFCPortRxBadEofs Counter32,
|
|
swFCPortRxEncOutFrs Counter32,
|
|
swFCPortRxBadOs Counter32,
|
|
swFCPortC3Discards Counter32,
|
|
swFCPortMcastTimedOuts Counter32,
|
|
swFCPortTxMcasts Counter32,
|
|
|
|
-- LIP statistics
|
|
swFCPortLipIns Counter32,
|
|
swFCPortLipOuts Counter32,
|
|
swFCPortLipLastAlpa OCTET STRING,
|
|
|
|
-- new for V2.1
|
|
swFCPortWwn OCTET STRING,
|
|
|
|
-- new for V3.0
|
|
swFCPortSpeed INTEGER,
|
|
|
|
-- new for Port Name Feature.
|
|
swFCPortName DisplayString,
|
|
|
|
-- new for PortSpecifier Feature.
|
|
swFCPortSpecifier DisplayString,
|
|
|
|
-- new for portFlag Feature.
|
|
swFCPortFlag FcPortFlag,
|
|
|
|
-- Brocade port type.
|
|
swFCPortBrcdType INTEGER
|
|
}
|
|
|
|
swFCPortIndex OBJECT-TYPE
|
|
SYNTAX SwPortIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the switch port index.
|
|
Note that the value of a port index is 1 higher than the
|
|
port number labeled on the front panel.
|
|
E.g. port index 1 correspond to port number 0."
|
|
::= { swFCPortEntry 1 }
|
|
|
|
swFCPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stitch (1),
|
|
flannel (2),
|
|
loom (3),
|
|
bloom (4),
|
|
rdbloom (5),
|
|
wormhole (6),
|
|
other (7),
|
|
unknown (8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the type of switch port.
|
|
It may be of type stitch(1), flannel(2), loom(3) , bloom(4),rdbloom(5) or wormhole(6)."
|
|
::= { swFCPortEntry 2 }
|
|
|
|
swFCPortPhyState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noCard (1),
|
|
noTransceiver (2),
|
|
laserFault (3),
|
|
noLight (4),
|
|
noSync (5),
|
|
inSync (6),
|
|
portFault (7),
|
|
diagFault (8),
|
|
lockRef (9),
|
|
validating (10),
|
|
invalidModule (11),
|
|
unknown (255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the physical state of
|
|
the port:
|
|
noCard(1) no card present in this switch slot;
|
|
noTransceiver(2) no Transceiver module in this port.
|
|
noGbic(2) was used previously. Transceiver
|
|
is the generic name for GBIC, SFP etc.;
|
|
laserFault(3) the module is signaling a laser fault
|
|
(defective Transceiver);
|
|
noLight(4) the module is not receiving light;
|
|
noSync(5) the module is receiving light but is
|
|
out of sync;
|
|
inSync(6) the module is receiving light and is
|
|
in sync;
|
|
portFault(7) the port is marked faulty (defective
|
|
Transceiver, cable or device);
|
|
diagFault(8) the port failed diagnostics (defective
|
|
G_Port or FL_Port card or motherboard);
|
|
lockRef(9) the port is locking to the reference
|
|
signal.
|
|
validating(10) Validation is in progress
|
|
invalidModule(11) Invalid SFP
|
|
unknown(255) unknown.
|
|
"
|
|
::= { swFCPortEntry 3 }
|
|
|
|
swFCPortOpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown (0),
|
|
online (1),
|
|
offline (2),
|
|
testing (3),
|
|
faulty (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the operational status of
|
|
the port. The online(1) state indicates that user frames
|
|
can be passed. The unknown(0) state indicates that likely
|
|
the port module is physically absent (see swFCPortPhyState)."
|
|
::= { swFCPortEntry 4 }
|
|
|
|
swFCPortAdmStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
online (1),
|
|
offline (2),
|
|
testing (3),
|
|
faulty (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The desired state of the port. A management station
|
|
may place the port in a desired state by setting this
|
|
object accordingly. The testing(3) state indicates that
|
|
no user frames can be passed. As the result of
|
|
either explicit management action or per configuration
|
|
information accessible by the switch, swFCPortAdmStatus is
|
|
then changed to either the online(1) or testing(3)
|
|
states, or remains in the offline(2) state."
|
|
::= { swFCPortEntry 5 }
|
|
|
|
swFCPortLinkState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2),
|
|
loopback (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the link state of the port.
|
|
The value may be:
|
|
enabled(1) - port is allowed to participate in the FC-PH
|
|
protocol with its attached port (or ports if it is
|
|
in a FC-AL loop);
|
|
disabled(2) - the port is not allowed to participate in
|
|
the FC-PH protocol with its attached port(s);
|
|
loopback(3) - the port may transmit frames through an
|
|
internal path to verify the health of the transmitter
|
|
and receiver path.
|
|
|
|
Note that when the port's link state changes, its
|
|
operational status (swFCPortOpStatus) will be affected."
|
|
::= { swFCPortEntry 6 }
|
|
|
|
swFCPortTxType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown (1),
|
|
lw (2),
|
|
sw (3),
|
|
ld (4),
|
|
cu (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the media transmitter type of
|
|
the port. The value may be:
|
|
unknown(1) cannot determined to the port driver
|
|
lw(2) long wave laser
|
|
sw(3) short wave laser
|
|
ld(4) long wave LED
|
|
cu(5) copper (electrical)."
|
|
::= { swFCPortEntry 7 }
|
|
|
|
-- counters
|
|
swFCPortTxWords OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of Fibre Channel
|
|
words that the port has transmitted."
|
|
::= { swFCPortEntry 11 }
|
|
|
|
swFCPortRxWords OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of Fibre Channel
|
|
words that the port has received."
|
|
::= { swFCPortEntry 12 }
|
|
|
|
swFCPortTxFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of (Fibre Channel)
|
|
frames that the port has transmitted."
|
|
::= { swFCPortEntry 13 }
|
|
|
|
swFCPortRxFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of (Fibre Channel)
|
|
frames that the port has received."
|
|
::= { swFCPortEntry 14 }
|
|
|
|
swFCPortRxC2Frames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of Class 2
|
|
frames that the port has received."
|
|
::= { swFCPortEntry 15 }
|
|
|
|
swFCPortRxC3Frames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of Class 3
|
|
frames that the port has received."
|
|
::= { swFCPortEntry 16 }
|
|
|
|
swFCPortRxLCs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of Link Control
|
|
frames that the port has received."
|
|
::= { swFCPortEntry 17 }
|
|
|
|
swFCPortRxMcasts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of Multicast
|
|
frames that the port has received."
|
|
::= { swFCPortEntry 18 }
|
|
|
|
swFCPortTooManyRdys OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of times when RDYs
|
|
exceeds the frames received."
|
|
::= { swFCPortEntry 19 }
|
|
|
|
swFCPortNoTxCredits OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of times when the
|
|
transmit credit has reached zero."
|
|
::= { swFCPortEntry 20 }
|
|
|
|
swFCPortRxEncInFrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of encoding error or
|
|
disparity error inside frames received."
|
|
::= { swFCPortEntry 21 }
|
|
|
|
swFCPortRxCrcs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of CRC errors
|
|
detected for frames received."
|
|
::= { swFCPortEntry 22 }
|
|
|
|
swFCPortRxTruncs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of truncated
|
|
frames that the port has received."
|
|
::= { swFCPortEntry 23 }
|
|
|
|
swFCPortRxTooLongs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of received frames that
|
|
are too long."
|
|
::= { swFCPortEntry 24 }
|
|
|
|
swFCPortRxBadEofs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of received frames that
|
|
have bad EOF delimiter."
|
|
::= { swFCPortEntry 25 }
|
|
|
|
swFCPortRxEncOutFrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of encoding error or
|
|
disparity error outside frames received."
|
|
::= { swFCPortEntry 26 }
|
|
|
|
swFCPortRxBadOs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of invalid Ordered
|
|
Sets received."
|
|
::= { swFCPortEntry 27 }
|
|
|
|
swFCPortC3Discards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of Class 3
|
|
frames that the port has discarded."
|
|
::= { swFCPortEntry 28 }
|
|
|
|
swFCPortMcastTimedOuts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of Multicast
|
|
frames that has been timed out."
|
|
::= { swFCPortEntry 29 }
|
|
|
|
swFCPortTxMcasts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of Multicast
|
|
frames that has been transmitted."
|
|
::= { swFCPortEntry 30 }
|
|
|
|
-- LIP statistics
|
|
swFCPortLipIns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of Loop Initializations
|
|
that has been initiated by loop devices attached."
|
|
::= { swFCPortEntry 31 }
|
|
|
|
swFCPortLipOuts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object counts the number of Loop Initializations
|
|
that has been initiated by the port."
|
|
::= { swFCPortEntry 32 }
|
|
|
|
swFCPortLipLastAlpa OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the Physical Address (AL_PA)
|
|
of the loop device that initiated the last
|
|
Loop Initialization."
|
|
::= { swFCPortEntry 33 }
|
|
|
|
swFCPortWwn OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The World_wide_Name of the Fibre Channel port.
|
|
The contents of an instance are in the IEEE extended format
|
|
as specified in FC-PH; the 12-bit port identifier represents
|
|
the port number within the switch."
|
|
::= { swFCPortEntry 34 }
|
|
|
|
swFCPortSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
one-GB (1),
|
|
two-GB (2),
|
|
auto-Negotiate (3),
|
|
four-GB (4),
|
|
eight-GB (5),
|
|
ten-GB (6),
|
|
unknown (7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The desired baud rate for the port. It can have the
|
|
values of 1GB (1), 2GB (2), Auto-Negotiate (3), 4GB (4), 8GB (5),
|
|
or 10GB (6). Some of the above values may not be supported
|
|
by all type of switches."
|
|
::= { swFCPortEntry 35 }
|
|
|
|
swFCPortName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A string indicates the name of the addressed port.
|
|
The names should be persistent across switch reboots.
|
|
Port names do not have to be unique within a switch or
|
|
within a fabric."
|
|
::= { swFCPortEntry 36 }
|
|
|
|
swFCPortSpecifier OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This string indicates the physical port number of the addressed port.
|
|
The format of the string is: <slot>/port, where 'slot' being
|
|
present only for bladed systems.
|
|
"
|
|
::= { swFCPortEntry 37 }
|
|
|
|
-- FC port status flag
|
|
|
|
swFCPortFlag OBJECT-TYPE
|
|
SYNTAX FcPortFlag
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit map of port status flags which includes the information of port type.
|
|
Currently this will indicate if the port is virtual or physical."
|
|
::= { swFCPortEntry 38 }
|
|
|
|
swFCPortBrcdType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown (1),
|
|
other (2),
|
|
fl-port (3), -- public loop
|
|
f-port (4), -- fabric port
|
|
e-port (5), -- fabric expansion port
|
|
g-port (6), -- generic fabric port
|
|
ex-port (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Brocade port type."
|
|
::= { swFCPortEntry 39 }
|
|
|
|
|
|
--
|
|
-- End of Fibre Channel Port group
|
|
--
|
|
|
|
--
|
|
-- swEventTable is defined to gather event info for trap
|
|
-- SNMP GET/SET is not supported on this
|
|
--
|
|
|
|
-- possible events available, included her for lib/thresh/fwd.c compilation
|
|
SwFwEvent ::= INTEGER {
|
|
started(1),
|
|
changed(2),
|
|
exceeded(3),
|
|
below(4),
|
|
above(5),
|
|
inBetween(6),
|
|
lowBufferCrsd(7)
|
|
}
|
|
|
|
|
|
swEventTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwEventEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table of event entries."
|
|
::= { swEvent 5 }
|
|
|
|
swEventEntry OBJECT-TYPE
|
|
SYNTAX SwEventEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of the event table."
|
|
INDEX { swEventIndex }
|
|
|
|
::= { swEventTable 1 }
|
|
|
|
SwEventEntry ::= SEQUENCE {
|
|
swEventIndex Integer32,
|
|
swEventTimeInfo DisplayString,
|
|
swEventLevel INTEGER,
|
|
swEventRepeatCount Integer32,
|
|
swEventDescr DisplayString,
|
|
swEventVfId Integer32
|
|
}
|
|
|
|
swEventIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the event entry."
|
|
::= { swEventEntry 1 }
|
|
|
|
swEventTimeInfo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the date and time when this
|
|
event occurred, in textual format."
|
|
::= { swEventEntry 2 }
|
|
|
|
swEventLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
critical (1),
|
|
error (2),
|
|
warning (3),
|
|
informational (4),
|
|
debug (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the severity level of this
|
|
event entry."
|
|
::= { swEventEntry 3 }
|
|
|
|
swEventRepeatCount OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies how many times this particular
|
|
event has occurred."
|
|
::= { swEventEntry 4 }
|
|
|
|
swEventDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the textual description of
|
|
the event."
|
|
::= { swEventEntry 5 }
|
|
|
|
swEventVfId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the Virtual fabric id."
|
|
::= { swEventEntry 6 }
|
|
|
|
|
|
--
|
|
-- Enterprise Specific Traps for Switch (sw).
|
|
--
|
|
|
|
swTrapsV2 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The Traps for Brocade's Switch."
|
|
::= { sw 0 }
|
|
|
|
swFCPortScn NOTIFICATION-TYPE
|
|
OBJECTS { swFCPortOpStatus, swFCPortIndex, swFCPortName,
|
|
swSsn, swFCPortFlag, swVfId }
|
|
STATUS current
|
|
DESCRIPTION "This trap is sent whenever an FC port operational status or
|
|
its type changed. The events that trigger this trap are
|
|
port goes to online/offline, port type changed to
|
|
E-port/F-port/FL-port. swFCPortName and swSsn are optional
|
|
varbind in the trap PDU.swSsn is optional varbind sent when swExtTrap
|
|
is also enabled.swVfId is optional if VF is enabled."
|
|
--#TYPE "A Fibre Channel Port changed its operational state."
|
|
--#SUMMARY "Port Index %d changed state to %d Port Name: %s and SSN is #%s"
|
|
--#ARGUMENTS { 1, 0, 2, 3 }
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 1
|
|
--#STATE OPERATIONAL
|
|
::= { swTrapsV2 3 }
|
|
|
|
swEventTrap NOTIFICATION-TYPE
|
|
OBJECTS { swEventIndex, swEventTimeInfo, swEventLevel,
|
|
swEventRepeatCount, swEventDescr, swSsn, swVfId }
|
|
STATUS current
|
|
DESCRIPTION "This trap is generated when an event whose
|
|
level at or below swEventTrapLevel occurs."
|
|
--#TYPE "A firmware event has been logged"
|
|
--#SUMMARY "Event %d: %s (severity level %d) - %s SSN is #%s"
|
|
--#ARGUMENTS { 0, 1, 2, 4, 5 }
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 1
|
|
--#STATE OPERATIONAL
|
|
::= { swTrapsV2 4 }
|
|
|
|
swStateChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS { swOperStatus, swVfId}
|
|
STATUS current
|
|
DESCRIPTION "This trap is sent whenever switch state changes to online/offline"
|
|
::= { swTrapsV2 12 }
|
|
|
|
END
|