mirror of
https://github.com/librenms/librenms.git
synced 2024-09-22 10:58:42 +00:00
53a4e91e8c
git-svn-id: http://www.observium.org/svn/observer/trunk@1645 61d68cd4-352d-0410-923a-c4978735b2b8
453 lines
14 KiB
Plaintext
453 lines
14 KiB
Plaintext
SOURCE-ROUTING-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
Counter, Gauge
|
|
FROM RFC1155-SMI
|
|
dot1dBridge, dot1dSr
|
|
FROM BRIDGE-MIB
|
|
OBJECT-TYPE
|
|
FROM RFC-1212;
|
|
|
|
-- groups in the SR MIB
|
|
|
|
-- dot1dSr is imported from the Bridge MIB
|
|
|
|
dot1dPortPair OBJECT IDENTIFIER ::= { dot1dBridge 10 }
|
|
|
|
-- the dot1dSr group
|
|
|
|
-- this group is implemented by those bridges that
|
|
-- support the source route bridging mode, including Source
|
|
-- Routing and SRT bridges.
|
|
|
|
dot1dSrPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dSrPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table that contains information about every
|
|
port that is associated with this source route
|
|
bridge."
|
|
::= { dot1dSr 1 }
|
|
|
|
dot1dSrPortEntry OBJECT-TYPE
|
|
SYNTAX Dot1dSrPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of information for each port of a source
|
|
route bridge."
|
|
INDEX { dot1dSrPort }
|
|
|
|
::= { dot1dSrPortTable 1 }
|
|
|
|
Dot1dSrPortEntry ::=
|
|
SEQUENCE {
|
|
dot1dSrPort
|
|
INTEGER,
|
|
dot1dSrPortHopCount
|
|
INTEGER,
|
|
dot1dSrPortLocalSegment
|
|
INTEGER,
|
|
dot1dSrPortBridgeNum
|
|
INTEGER,
|
|
dot1dSrPortTargetSegment
|
|
INTEGER,
|
|
dot1dSrPortLargestFrame
|
|
INTEGER,
|
|
dot1dSrPortSTESpanMode
|
|
INTEGER,
|
|
dot1dSrPortSpecInFrames
|
|
Counter,
|
|
dot1dSrPortSpecOutFrames
|
|
Counter,
|
|
dot1dSrPortApeInFrames
|
|
Counter,
|
|
dot1dSrPortApeOutFrames
|
|
Counter,
|
|
dot1dSrPortSteInFrames
|
|
Counter,
|
|
dot1dSrPortSteOutFrames
|
|
Counter,
|
|
dot1dSrPortSegmentMismatchDiscards
|
|
Counter,
|
|
dot1dSrPortDuplicateSegmentDiscards
|
|
Counter,
|
|
dot1dSrPortHopCountExceededDiscards
|
|
Counter,
|
|
dot1dSrPortDupLanIdOrTreeErrors
|
|
Counter,
|
|
dot1dSrPortLanIdMismatches
|
|
Counter
|
|
}
|
|
|
|
dot1dSrPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port number of the port for which this entry
|
|
|
|
contains Source Route management information."
|
|
::= { dot1dSrPortEntry 1 }
|
|
|
|
dot1dSrPortHopCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum number of routing descriptors allowed
|
|
in an All Paths or Spanning Tree Explorer frames."
|
|
::= { dot1dSrPortEntry 2 }
|
|
|
|
dot1dSrPortLocalSegment OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The segment number that uniquely identifies the
|
|
segment to which this port is connected. Current
|
|
source routing protocols limit this value to the
|
|
range: 0 through 4095. (The value 0 is used by
|
|
some management applications for special test
|
|
cases.) A value of 65535 signifies that no segment
|
|
number is assigned to this port."
|
|
::= { dot1dSrPortEntry 3 }
|
|
|
|
dot1dSrPortBridgeNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A bridge number uniquely identifies a bridge when
|
|
more than one bridge is used to span the same two
|
|
segments. Current source routing protocols limit
|
|
this value to the range: 0 through 15. A value of
|
|
65535 signifies that no bridge number is assigned
|
|
to this bridge."
|
|
::= { dot1dSrPortEntry 4 }
|
|
|
|
dot1dSrPortTargetSegment OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The segment number that corresponds to the target
|
|
segment this port is considered to be connected to
|
|
by the bridge. Current source routing protocols
|
|
limit this value to the range: 0 through 4095.
|
|
|
|
(The value 0 is used by some management
|
|
applications for special test cases.) A value of
|
|
65535 signifies that no target segment is assigned
|
|
to this port."
|
|
::= { dot1dSrPortEntry 5 }
|
|
|
|
-- It would be nice if we could use ifMtu as the size of the
|
|
-- largest frame, but we can't because ifMtu is defined to be
|
|
-- the size that the (inter-)network layer can use which can
|
|
-- differ from the MAC layer (especially if several layers of
|
|
-- encapsulation are used).
|
|
|
|
dot1dSrPortLargestFrame OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum size of the INFO field (LLC and
|
|
above) that this port can send/receive. It does
|
|
not include any MAC level (framing) octets. The
|
|
value of this object is used by this bridge to
|
|
determine whether a modification of the
|
|
LargestFrame (LF, see [14]) field of the Routing
|
|
Control field of the Routing Information Field is
|
|
necessary.
|
|
|
|
64 valid values are defined by the IEEE 802.5M SRT
|
|
Addendum: 516, 635, 754, 873, 993, 1112, 1231,
|
|
1350, 1470, 1542, 1615, 1688, 1761, 1833, 1906,
|
|
1979, 2052, 2345, 2638, 2932, 3225, 3518, 3812,
|
|
4105, 4399, 4865, 5331, 5798, 6264, 6730, 7197,
|
|
7663, 8130, 8539, 8949, 9358, 9768, 10178, 10587,
|
|
10997, 11407, 12199, 12992, 13785, 14578, 15370,
|
|
16163, 16956, 17749, 20730, 23711, 26693, 29674,
|
|
32655, 35637, 38618, 41600, 44591, 47583, 50575,
|
|
53567, 56559, 59551, and 65535.
|
|
|
|
An illegal value will not be accepted by the
|
|
bridge."
|
|
::= { dot1dSrPortEntry 6 }
|
|
|
|
dot1dSrPortSTESpanMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto-span(1),
|
|
disabled(2),
|
|
forced(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Determines how this port behaves when presented
|
|
with a Spanning Tree Explorer frame. The value
|
|
'disabled(2)' indicates that the port will not
|
|
accept or send Spanning Tree Explorer packets; any
|
|
STE packets received will be silently discarded.
|
|
The value 'forced(3)' indicates the port will
|
|
always accept and propagate Spanning Tree Explorer
|
|
frames. This allows a manually configured
|
|
Spanning Tree for this class of packet to be
|
|
configured. Note that unlike transparent
|
|
bridging, this is not catastrophic to the network
|
|
if there are loops. The value 'auto-span(1)' can
|
|
only be returned by a bridge that both implements
|
|
the Spanning Tree Protocol and has use of the
|
|
protocol enabled on this port. The behavior of the
|
|
port for Spanning Tree Explorer frames is
|
|
determined by the state of dot1dStpPortState. If
|
|
the port is in the 'forwarding' state, the frame
|
|
will be accepted or propagated. Otherwise, it
|
|
will be silently discarded."
|
|
::= { dot1dSrPortEntry 7 }
|
|
|
|
dot1dSrPortSpecInFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of Specifically Routed frames, also
|
|
referred to as Source Routed Frames, that have
|
|
been received from this port's segment."
|
|
::= { dot1dSrPortEntry 8 }
|
|
|
|
dot1dSrPortSpecOutFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of Specifically Routed frames, also
|
|
referred to as Source Routed Frames, that this
|
|
port has transmitted on its segment."
|
|
::= { dot1dSrPortEntry 9 }
|
|
|
|
dot1dSrPortApeInFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of All Paths Explorer frames, also
|
|
referred to as All Routes Explorer frames, that
|
|
have been received by this port from its segment."
|
|
::= { dot1dSrPortEntry 10 }
|
|
|
|
dot1dSrPortApeOutFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of all Paths Explorer Frames, also
|
|
referred to as All Routes Explorer frames, that
|
|
have been transmitted by this port on its
|
|
segment."
|
|
::= { dot1dSrPortEntry 11 }
|
|
|
|
dot1dSrPortSteInFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of spanning tree explorer frames that
|
|
have been received by this port from its segment."
|
|
::= { dot1dSrPortEntry 12 }
|
|
|
|
dot1dSrPortSteOutFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of spanning tree explorer frames that
|
|
have been transmitted by this port on its
|
|
segment."
|
|
::= { dot1dSrPortEntry 13 }
|
|
|
|
dot1dSrPortSegmentMismatchDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of explorer frames that have been
|
|
discarded by this port because the routing
|
|
descriptor field contained an invalid adjacent
|
|
segment value."
|
|
::= { dot1dSrPortEntry 14 }
|
|
|
|
dot1dSrPortDuplicateSegmentDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames that have been discarded by
|
|
this port because the routing descriptor field
|
|
contained a duplicate segment identifier."
|
|
::= { dot1dSrPortEntry 15 }
|
|
|
|
dot1dSrPortHopCountExceededDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of explorer frames that have been
|
|
discarded by this port because the Routing
|
|
Information Field has exceeded the maximum route
|
|
descriptor length."
|
|
::= { dot1dSrPortEntry 16 }
|
|
|
|
dot1dSrPortDupLanIdOrTreeErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of duplicate LAN IDs or Tree errors.
|
|
This helps in detection of problems in networks
|
|
containing older IBM Source Routing Bridges."
|
|
::= { dot1dSrPortEntry 17 }
|
|
|
|
dot1dSrPortLanIdMismatches OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ARE and STE frames that were
|
|
discarded because the last LAN ID in the routing
|
|
information field did not equal the LAN-in ID.
|
|
This error can occur in implementations which do
|
|
only a LAN-in ID and Bridge Number check instead
|
|
of a LAN-in ID, Bridge Number, and LAN-out ID
|
|
check before they forward broadcast frames."
|
|
::= { dot1dSrPortEntry 18 }
|
|
|
|
-- scalar object in dot1dSr
|
|
|
|
dot1dSrBridgeLfMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mode3(1),
|
|
mode6(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the bridge operates using older
|
|
3 bit length negotiation fields or the newer 6 bit
|
|
length field in its RIF."
|
|
::= { dot1dSr 2 }
|
|
|
|
-- The Port-Pair Database
|
|
|
|
-- Implementation of this group is optional.
|
|
|
|
-- This group is implemented by those bridges that support
|
|
-- the direct multiport model of the source route bridging
|
|
-- mode as defined in the IEEE 802.5 SRT Addendum to
|
|
-- 802.1d.
|
|
|
|
-- Bridges implementing this group may report 65535 for
|
|
-- dot1dSrPortBridgeNumber and dot1dSrPortTargetSegment,
|
|
-- indicating that those objects are not applicable.
|
|
|
|
dot1dPortPairTableSize OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of entries in the Bridge Port
|
|
Pair Database."
|
|
::= { dot1dPortPair 1 }
|
|
|
|
-- the Bridge Port-Pair table
|
|
|
|
-- this table represents port pairs within a bridge forming
|
|
-- a unique bridge path, as defined in the IEEE 802.5M SRT
|
|
-- Addendum.
|
|
|
|
dot1dPortPairTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dPortPairEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table that contains information about every
|
|
|
|
port pair database entity associated with this
|
|
source routing bridge."
|
|
::= { dot1dPortPair 2 }
|
|
|
|
dot1dPortPairEntry OBJECT-TYPE
|
|
SYNTAX Dot1dPortPairEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of information for each port pair entity
|
|
of a bridge."
|
|
INDEX { dot1dPortPairLowPort, dot1dPortPairHighPort }
|
|
::= { dot1dPortPairTable 1 }
|
|
|
|
Dot1dPortPairEntry ::=
|
|
SEQUENCE {
|
|
dot1dPortPairLowPort
|
|
INTEGER,
|
|
dot1dPortPairHighPort
|
|
INTEGER,
|
|
dot1dPortPairBridgeNum
|
|
INTEGER,
|
|
dot1dPortPairBridgeState
|
|
INTEGER
|
|
}
|
|
|
|
dot1dPortPairLowPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port number of the lower numbered port for
|
|
which this entry contains port pair database
|
|
information."
|
|
::= { dot1dPortPairEntry 1 }
|
|
|
|
dot1dPortPairHighPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port number of the higher numbered port for
|
|
which this entry contains port pair database
|
|
information."
|
|
::= { dot1dPortPairEntry 2 }
|
|
|
|
dot1dPortPairBridgeNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A bridge number that uniquely identifies the path
|
|
provided by this source routing bridge between the
|
|
segments connected to dot1dPortPairLowPort and
|
|
dot1dPortPairHighPort. The purpose of bridge
|
|
number is to disambiguate between multiple paths
|
|
connecting the same two LANs."
|
|
::= { dot1dPortPairEntry 3 }
|
|
|
|
dot1dPortPairBridgeState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2),
|
|
invalid(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The state of dot1dPortPairBridgeNum. Writing
|
|
'invalid(3)' to this object removes the
|
|
corresponding entry."
|
|
::= { dot1dPortPairEntry 4 }
|
|
|
|
END
|