librenms/mibs/CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
Adam Amstrong 49e0dd246d THIS. IS. MIBSA!
git-svn-id: http://www.observium.org/svn/observer/trunk@2799 61d68cd4-352d-0410-923a-c4978735b2b8
2011-12-16 17:31:00 +00:00

163 lines
4.9 KiB
Plaintext

-- *****************************************************************
-- CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB - show the VLAN-ID and
-- ifIndex for routed VLANs (ISL subinterfaces, and SVIs)
--
-- January 1999, Cliff Sojourner
--
-- Copyright (c) 1999 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ciscoMgmt
FROM CISCO-SMI
InterfaceIndexOrZero
FROM CISCO-TC
InterfaceIndex
FROM IF-MIB
VlanIndex
FROM CISCO-VTP-MIB;
ciscoVlanIfTableRelationshipMIB MODULE-IDENTITY
LAST-UPDATED "9904010530Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"
DESCRIPTION
"Cisco VLAN ifTable Relationship MIB lists VLAN-id and ifIndex
information for routed VLAN interfaces.
A routed VLAN interface is the router interface or sub-interface
to which the router's IP address on the VLAN is attached.
For example, an ISL, SDE, or 802.1Q encapsulated
subinterface, or Switched Virtual Interface (SVI)."
::= { ciscoMgmt 128 }
cviMIBObjects OBJECT IDENTIFIER ::= { ciscoVlanIfTableRelationshipMIB 1 }
cviGlobals OBJECT IDENTIFIER ::= { cviMIBObjects 1 }
cviVlanInterfaceIndexTable OBJECT-TYPE
SYNTAX SEQUENCE OF CviVlanInterfaceIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The cviVlanInterfaceIndexTable provides a way to
translate a VLAN-id in to an ifIndex, so that
the routed VLAN interface's routing configuration
can be obtained from interface entry in ipRouteTable.
Note that some routers can have interfaces to multiple
VLAN management domains, and therefore can have multiple
routed VLAN interfaces which connect to different VLANs
having the same VLAN-id. Thus, it is possible to have
multiple rows in this table for the same VLAN-id.
The cviVlanInterfaceIndexTable also provides a way
to find the VLAN-id from an ifTable VLAN's ifIndex."
::= { cviGlobals 1 }
CviVlanInterfaceIndexEntry ::= SEQUENCE {
cviVlanId VlanIndex,
cviPhysicalIfIndex InterfaceIndexOrZero,
cviRoutedVlanIfIndex InterfaceIndex
}
cviVlanInterfaceIndexEntry OBJECT-TYPE
SYNTAX CviVlanInterfaceIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a routed VLAN interface, its
corresponding physical port if any, and the ifTable entry
for the routed VLAN interface.
Entries are created by the agent when the routed VLAN interface
is created. Operational status of routing does not affect
the entries listed here. For routing configuration please refer
to ipRouteTable.
Entries are deleted by the agent when the routed VLAN interface
is removed from the system configuration."
INDEX { cviVlanId, cviPhysicalIfIndex }
::= { cviVlanInterfaceIndexTable 1 }
cviVlanId OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN-id number of the routed VLAN interface."
::= { cviVlanInterfaceIndexEntry 1 }
cviPhysicalIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For subinterfaces, this object is the ifIndex of the
physical interface for the subinterface.
For Switch Virtual Interfaces (SVIs), this object is zero."
::= { cviVlanInterfaceIndexEntry 2 }
cviRoutedVlanIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index for the ifTable entry associated with
this routed VLAN interface."
::= { cviVlanInterfaceIndexEntry 3 }
cviMIBConformance OBJECT IDENTIFIER ::= { cviMIBObjects 3 }
cviMIBCompliances OBJECT IDENTIFIER ::= { cviMIBConformance 1 }
cviMIBGroups OBJECT IDENTIFIER ::= { cviMIBConformance 2 }
--
-- Conformance
--
cviMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the CISCO-VLAN-INTERFACE-MIB"
MODULE -- this module
MANDATORY-GROUPS { cviMIBGroup }
::= { cviMIBCompliances 1 }
--
-- Units of Conformance
--
cviMIBGroup OBJECT-GROUP
OBJECTS {
cviRoutedVlanIfIndex
}
STATUS current
DESCRIPTION
"A set of objects to obtain VLAN-ID and ifIndex
information for routed VLAN interfaces."
::= { cviMIBGroups 1 }
END