mirror of
https://github.com/librenms/librenms.git
synced 2024-09-21 10:28:13 +00:00
29458 lines
772 KiB
Plaintext
29458 lines
772 KiB
Plaintext
--------------------------------------------------------------------------------
|
|
--------------------------------------------------------------------------------
|
|
-- The lineintegrator MIB
|
|
-- ______________
|
|
--
|
|
-- 1. Introduction
|
|
-- This document defines the enterprise specific MIB for the LineIntegrater,
|
|
-- which provides the management of the ULAF+ transmission family.
|
|
-- The MIB is divided into three basic MIBs
|
|
-- proxyAgent MIB
|
|
-- device MIB
|
|
-- links MIB
|
|
--
|
|
-- 2. The proxyAgent MIB
|
|
-- _____________________
|
|
--
|
|
-- The proxyAgent MIB consists of a table with information about the
|
|
-- supervised serial ports and the connected devices. Either a rack or a
|
|
-- Desktop device can be connected. This part of the mib is identical for
|
|
-- Ulaf-2 and Ulaf+ devices
|
|
--
|
|
--
|
|
-- 3. The device MIB
|
|
-- _________________
|
|
--
|
|
-- The device MIB is a table, where each entry refers to a line card slot.
|
|
-- It contains the name of the inserted cards and a alarm attribute, which
|
|
-- is used to send SNMP traps to the manager, if a link goes down.
|
|
--
|
|
-- 5. The links MIB
|
|
-- _____________________
|
|
--
|
|
-- The links MIB consists of several tables, which contain detailed
|
|
-- management information about the line cards.
|
|
-- The links MIB is divided into Xxxx parts
|
|
--
|
|
--------------------------------------------------------------------------------
|
|
ULAFPLUS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
enterprises, NetworkAddress, IpAddress, Counter, Gauge,
|
|
TimeTicks
|
|
FROM RFC1155-SMI
|
|
DisplayString
|
|
FROM RFC1213-MIB
|
|
OBJECT-TYPE
|
|
FROM RFC-1212;
|
|
|
|
siemensCH OBJECT IDENTIFIER ::= { enterprises 1887 }
|
|
|
|
lineintegrator OBJECT IDENTIFIER ::= { siemensCH 1 }
|
|
|
|
ulaf2 OBJECT IDENTIFIER ::= { lineintegrator 1 }
|
|
|
|
links OBJECT IDENTIFIER ::= { ulaf2 4 }
|
|
|
|
|
|
linksVers3 OBJECT IDENTIFIER ::= { links 3 }
|
|
|
|
|
|
--==============================================================================
|
|
--==============================================================================
|
|
--
|
|
-- CM-RO
|
|
--
|
|
--==============================================================================
|
|
--==============================================================================
|
|
cmro OBJECT IDENTIFIER ::= { linksVers3 1 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RO HTU-local
|
|
--------------------------------------------------------------------------------
|
|
cmroHtuLocalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmroHtuLocalEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmro 1 }
|
|
|
|
cmroHtuLocalEntry OBJECT-TYPE
|
|
SYNTAX CmroHtuLocalEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmroHtuLocalPortIndex, cmroHtuLocalLinkIndex }
|
|
::= { cmroHtuLocalTable 1 }
|
|
|
|
CmroHtuLocalEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmroHtuLocalPortIndex INTEGER,
|
|
cmroHtuLocalLinkIndex INTEGER,
|
|
cmroHtuLocalHwFabData DisplayString,
|
|
cmroHtuLocalActFwType DisplayString,
|
|
cmroHtuLocalActFwVers DisplayString,
|
|
cmroHtuLocalPasBankState INTEGER,
|
|
cmroHtuLocalPasFwType DisplayString,
|
|
cmroHtuLocalPasFwVers DisplayString,
|
|
cmroHtuLocalSeepromVers DisplayString,
|
|
cmroHtuLocalDFabData DisplayString,
|
|
cmroHtuLocalDType INTEGER,
|
|
cmroHtuLocalTFabData DisplayString,
|
|
cmroHtuLocalTType INTEGER,
|
|
cmroHtuLocalRpsFabData DisplayString,
|
|
cmroHtuLocalRpsType INTEGER,
|
|
cmroHtuLocalClkFabData DisplayString,
|
|
cmroHtuLocalClkType INTEGER,
|
|
cmroHtuLocalDbgFabData DisplayString,
|
|
cmroHtuLocalDbgType INTEGER,
|
|
cmroHtuLocalHousing INTEGER,
|
|
cmroHtuLocalRackVersion INTEGER,
|
|
cmroHtuLocalLtNtType INTEGER,
|
|
cmroHtuLocalHdslChipset INTEGER,
|
|
cmroHtuLocalDipCfg INTEGER,
|
|
cmroHtuLocalEocCfg INTEGER,
|
|
cmroHtuLocalRpsVoltage INTEGER,
|
|
cmroHtuLocalPowerConfiguration INTEGER,
|
|
cmroHtuLocalIsdnFabData DisplayString,
|
|
cmroHtuLocalIsdnType INTEGER,
|
|
cmroHtuLocalTipRingReversal1 INTEGER,
|
|
cmroHtuLocalTipRingReversal2 INTEGER,
|
|
cmroHtuLocalTipRingReversal3 INTEGER,
|
|
cmroHtuLocalTipRingReversal4 INTEGER,
|
|
cmroHtuLocalPacketFabData DisplayString,
|
|
cmroHtuLocalPacketType INTEGER,
|
|
cmroHtuLocalPacketMacAddr1 OCTET STRING,
|
|
cmroHtuLocalMcsCh1aIsRemCh INTEGER,
|
|
cmroHtuLocalMcsCh2bIsRemCh INTEGER,
|
|
cmroHtuLocalMcsCh3cIsRemCh INTEGER,
|
|
cmroHtuLocalMcsCh4dIsRemCh INTEGER,
|
|
cmroHtuLocalMcsFarCh1aIsRemCh INTEGER,
|
|
cmroHtuLocalMcsFarCh2bIsRemCh INTEGER,
|
|
cmroHtuLocalMcsFarCh3cIsRemCh INTEGER,
|
|
cmroHtuLocalMcsFarCh4dIsRemCh INTEGER,
|
|
cmroHtuLocalDslChipset DisplayString,
|
|
cmroHtuLocalDslFwLoad DisplayString,
|
|
cmroHtuLocalFpgaLoad DisplayString,
|
|
cmroHtuLocalEthWanChip DisplayString,
|
|
cmroHtuLocalSwitchChip DisplayString,
|
|
cmroHtuLocalBootloaderVers DisplayString,
|
|
cmroHtuLocalSerialNumber DisplayString,
|
|
cmroHtuLocalHwManufacturingDate DisplayString,
|
|
cmroHtuLocalRpsManufacturingDate DisplayString,
|
|
cmroHtuLocalClkManufacturingDate DisplayString,
|
|
cmroHtuLocalTManufacturingDate DisplayString,
|
|
cmroHtuLocalDManufacturingDate DisplayString,
|
|
cmroHtuLocalPacketManufacturingDate DisplayString,
|
|
cmroHtuLocalL2SDriverVersion DisplayString
|
|
}
|
|
|
|
cmroHtuLocalPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroHtuLocalEntry 1 }
|
|
|
|
cmroHtuLocalLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroHtuLocalEntry 2 }
|
|
|
|
cmroHtuLocalHwFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Device Hardware Fabrication Data"
|
|
::= { cmroHtuLocalEntry 3 }
|
|
|
|
cmroHtuLocalActFwType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of active Firmware"
|
|
::= { cmroHtuLocalEntry 4 }
|
|
|
|
cmroHtuLocalActFwVers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of active Firmware"
|
|
::= { cmroHtuLocalEntry 5 }
|
|
|
|
cmroHtuLocalPasBankState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
loaded(2),
|
|
foreign(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of passive firmware bank
|
|
1 Empty contains no firmware
|
|
2 Loaded contains a valid firmware
|
|
3 Foreign contains regenerator firmware
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 6 }
|
|
|
|
cmroHtuLocalPasFwType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of passive firmware"
|
|
::= { cmroHtuLocalEntry 7 }
|
|
|
|
cmroHtuLocalPasFwVers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of passive firmware"
|
|
::= { cmroHtuLocalEntry 8 }
|
|
|
|
cmroHtuLocalSeepromVers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of SEEPROM data format"
|
|
::= { cmroHtuLocalEntry 9 }
|
|
|
|
cmroHtuLocalDFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Data-Module"
|
|
::= { cmroHtuLocalEntry 10 }
|
|
|
|
cmroHtuLocalDType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
dce(2),
|
|
dte(3),
|
|
tenBaseT(4),
|
|
abar(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Data-Module in corresponding module-slot of the device.
|
|
1 None No module inserted
|
|
2 DCE Data module with DCE configuration
|
|
3 DTE Data module with DTE configuration
|
|
4 10Base-T 10Base-T Ethernet module
|
|
5 ABAR Advanced Bridge and Router module
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
|
|
For details of the module (connector sub-types, ...) the
|
|
fabrication data has to evaluated"
|
|
::= { cmroHtuLocalEntry 11 }
|
|
|
|
cmroHtuLocalTFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of 2Mbit-Module"
|
|
::= { cmroHtuLocalEntry 12 }
|
|
|
|
cmroHtuLocalTType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
twoMbps(2),
|
|
quadTwoMbps(3),
|
|
codirTwoMbps(4),
|
|
twoMbpsVarImps(5),
|
|
quadTwoMbpsVarImp(6),
|
|
fourTwoMbpsVarImp(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of 2Mbit-Module in corresponding module-slot of the device.
|
|
1 None No module present
|
|
2 TwoMbps A 2Mbit/s module is present
|
|
3 QuadTwoMbps A Quad 2Mbit/s module is present
|
|
4 CodirTwoMbps A Co-Directional G.703 module is present
|
|
5 TwoMbpsVarImp A 2Mbit/s module with variable impedance is present
|
|
6 QuadTwoMbpsVarImp A Quad 2Mbit/s module with variable impedance is present
|
|
7 FourTwoMbpsVarImp Module with four independent 2Mbit/s (variable impedance) is present
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
|
|
For details of the module (connector sub-types, ...) the
|
|
fabrication data has to evaluated"
|
|
::= { cmroHtuLocalEntry 13 }
|
|
|
|
cmroHtuLocalRpsFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Remote Power Supply (RPS) Module"
|
|
::= { cmroHtuLocalEntry 14 }
|
|
|
|
cmroHtuLocalRpsType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
rps(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Remote Power Supply (RPS) Module in corresponding
|
|
module-slot of the device.
|
|
1 None No module inserted
|
|
2 Rps A RPS module is inserted
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
|
|
For details of the module (connector sub-types, ...) the
|
|
fabrication data has to evaluated"
|
|
::= { cmroHtuLocalEntry 15 }
|
|
|
|
cmroHtuLocalClkFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Clock and Alarm Module"
|
|
::= { cmroHtuLocalEntry 16 }
|
|
|
|
cmroHtuLocalClkType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
clockAlarm(2),
|
|
clock(3),
|
|
alarm(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Clock and Alarm Module in corresponding
|
|
module-slot of the device.
|
|
1 None No module inserted
|
|
2 ClockAlarm A combined Clock and Alarm module is inserted
|
|
3 Clock A Clock module is inserted
|
|
3 Alarm An Alarm module is inserted
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
|
|
For details of the module (connector sub-types, ...) the
|
|
fabrication data has to evaluated"
|
|
::= { cmroHtuLocalEntry 17 }
|
|
|
|
cmroHtuLocalDbgFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Debug-Module"
|
|
::= { cmroHtuLocalEntry 18 }
|
|
|
|
cmroHtuLocalDbgType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
debug(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Debug-Module in corresponding module-slot of the device.
|
|
1 None No module inserted
|
|
2 Debug A Debug module is inserted
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
|
|
For details of the module (connector sub-types, ...) the
|
|
fabrication data has to evaluated"
|
|
::= { cmroHtuLocalEntry 19 }
|
|
|
|
cmroHtuLocalHousing OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
rack(1),
|
|
desktop(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of housing / installation of the device.
|
|
1 Rack The device is a line card to be installed in a sub-rack
|
|
2 Desktop The device is a desktop device
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 20 }
|
|
|
|
cmroHtuLocalRackVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
rackV1(1),
|
|
rackV2(2),
|
|
rackV3(3),
|
|
desktop(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of the sub-rack in which the device is installed.
|
|
1 RackV1 The device is installed in a rack with V1
|
|
2 RackV2 The device is installed in a rack with V2
|
|
3 RackV3 The device is installed in a rack with V3
|
|
4 Desktop The device is a desktop device (and therefore not installed in a sub-rack)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 21 }
|
|
|
|
cmroHtuLocalLtNtType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lt(1),
|
|
nt(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the device is configured as LT or NT.
|
|
1 LT The device is configured as LT
|
|
2 NT The device is configured as NT
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 22 }
|
|
|
|
cmroHtuLocalHdslChipset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
level1(1),
|
|
metalink(2),
|
|
infineon(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates which chipset the partner device uses for HDSL transmission
|
|
1 Level1 The partner device uses a Level 1 chipset
|
|
2 Metalink The partner device uses a MetaLink chipset
|
|
3 Infineon The partner device uses an Infineon chipset
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 23 }
|
|
|
|
cmroHtuLocalDipCfg OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the device is configured through DIP Switches.
|
|
1 Disabled The device can be configured through management software
|
|
2 Enabled The device is configured by DIP switches
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 24 }
|
|
|
|
cmroHtuLocalEocCfg OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
reg1(3),
|
|
reg2(4),
|
|
reg3(5),
|
|
reg4(6),
|
|
reg5(7),
|
|
reg6(8),
|
|
reg7(9),
|
|
reg8(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates how far the EOC has been built up.
|
|
1 Disabled The device can be configured locally
|
|
2 Enabled The device is being configured over the EOC
|
|
3 Reg1 The EOC is up until the first regenerator section
|
|
4 Reg2 The EOC is up until the second regenerator section
|
|
5 Reg3 The EOC is up until the third regenerator section
|
|
6 Reg4 The EOC is up until the fourth regenerator section
|
|
7 Reg5 The EOC is up until the fifth regenerator section
|
|
8 Reg6 The EOC is up until the sixth regenerator section
|
|
9 Reg7 The EOC is up until the seventh regenerator section
|
|
10 Reg8 The EOC is up until the eighth regenerator section
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 25 }
|
|
|
|
cmroHtuLocalRpsVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
v120(1),
|
|
v180(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates which Remote Power Supply (RPS) Voltage is being used by the device
|
|
1 V120 The RPS uses 120 Volts
|
|
2 V180 The RPS uses 180 Volts
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 26 }
|
|
|
|
cmroHtuLocalPowerConfiguration OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
multifunctional(1),
|
|
redundant(2),
|
|
remoteFeeding(3),
|
|
batteryDC(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates which kind of power supply is equiped
|
|
1 multifunctional No redundant supply possible
|
|
2 redundant Redundant supply possible
|
|
3 remoteFeeding Remote feeding possible
|
|
4 batteryDC DC-only supply
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 27 }
|
|
|
|
|
|
cmroHtuLocalIsdnFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of ISDN-Module"
|
|
::= { cmroHtuLocalEntry 28 }
|
|
|
|
|
|
cmroHtuLocalIsdnType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
te(2),
|
|
nt(3),
|
|
uk0(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of ISDN-Module in corresponding module-slot of the device
|
|
1 None No module inserted
|
|
2 TE A module for S0(TE mode) operation is inserted
|
|
3 NT A module for S0(NT mode) operation is inserted
|
|
4 Uk0 A module for Uk0 operation is inserted
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 29 }
|
|
|
|
|
|
cmroHtuLocalTipRingReversal1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(1),
|
|
yes(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether tip-ring reversal has been detected and compensated
|
|
for on the first wire pair
|
|
1 No Reversal not detected
|
|
2 Yes Reversal detected and compensated for
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 30 }
|
|
|
|
cmroHtuLocalTipRingReversal2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(1),
|
|
yes(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether tip-ring reversal has been detected and compensated
|
|
for on the second wire pair
|
|
1 No Reversal not detected
|
|
2 Yes Reversal detected and compensated for
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 31 }
|
|
|
|
cmroHtuLocalTipRingReversal3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(1),
|
|
yes(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether tip-ring reversal has been detected and compensated
|
|
for on the third wire pair
|
|
1 No Reversal not detected
|
|
2 Yes Reversal detected and compensated for
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 32 }
|
|
|
|
cmroHtuLocalTipRingReversal4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(1),
|
|
yes(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether tip-ring reversal has been detected and compensated
|
|
for on the fourth wire pair
|
|
1 No Reversal not detected
|
|
2 Yes Reversal detected and compensated for
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 33 }
|
|
|
|
cmroHtuLocalPacketFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of L2 Switch"
|
|
::= { cmroHtuLocalEntry 34 }
|
|
|
|
cmroHtuLocalPacketType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
fourPort10-100(2),
|
|
onePort10-100(3),
|
|
twoPort10-100(4),
|
|
threePort10-100(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of L2 Switch module.
|
|
1 None No module inserted
|
|
2 4P10/100 4-Port 10/100Base-T ethernet switch
|
|
3 1P10/100 1-Port 10/100Base-T ethernet switch
|
|
4 2P10/100 2-Port 10/100Base-T ethernet switch
|
|
5 3P10/100 3-Port 10/100Base-T ethernet switch
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
|
|
For details of the module (connector sub-types, ...) the
|
|
fabrication data has to evaluated"
|
|
::= { cmroHtuLocalEntry 35 }
|
|
|
|
cmroHtuLocalPacketMacAddr1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MAC address of L2 ethernet switch.
|
|
Value of Byte 0..5 Meaning
|
|
|
|
0x00 - 0xFD MAC address
|
|
all 0xFE unknown value
|
|
all 0xFF unsupported variable"
|
|
::= { cmroHtuLocalEntry 36 }
|
|
|
|
cmroHtuLocalMcsCh1aIsRemCh OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
first(1),
|
|
second(2),
|
|
third(3),
|
|
fourth(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates MCS channel crossover. This variable shows which
|
|
MCS channel the local channel a is conntected to on the far
|
|
end MCS device.
|
|
1 U1/VA first interface (SHDSL U1 or G.704 VA)
|
|
2 U2/VB second interface (SHDSL U2 or G.704 VB)
|
|
3 U3/VC third interface (SHDSL U3 or G.704 VC)
|
|
4 U4/VD fourth interface (SHDSL U4 or G.704 VD)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 37 }
|
|
|
|
cmroHtuLocalMcsCh2bIsRemCh OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
first(1),
|
|
second(2),
|
|
third(3),
|
|
fourth(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates MCS channel crossover. This variable shows which
|
|
MCS channel the local channel b is conntected to on the far
|
|
end MCS device.
|
|
1 U1/VA first interface (SHDSL U1 or G.704 VA)
|
|
2 U2/VB second interface (SHDSL U2 or G.704 VB)
|
|
3 U3/VC third interface (SHDSL U3 or G.704 VC)
|
|
4 U4/VD fourth interface (SHDSL U4 or G.704 VD)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 38 }
|
|
|
|
cmroHtuLocalMcsCh3cIsRemCh OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
first(1),
|
|
second(2),
|
|
third(3),
|
|
fourth(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates MCS channel crossover. This variable shows which
|
|
MCS channel the local channel c is conntected to on the far
|
|
end MCS device.
|
|
1 U1/VA first interface (SHDSL U1 or G.704 VA)
|
|
2 U2/VB second interface (SHDSL U2 or G.704 VB)
|
|
3 U3/VC third interface (SHDSL U3 or G.704 VC)
|
|
4 U4/VD fourth interface (SHDSL U4 or G.704 VD)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 39 }
|
|
|
|
cmroHtuLocalMcsCh4dIsRemCh OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
first(1),
|
|
second(2),
|
|
third(3),
|
|
fourth(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates MCS channel crossover. This variable shows which
|
|
MCS channel the local channel d is conntected to on the far
|
|
end MCS device.
|
|
1 U1/VA first interface (SHDSL U1 or G.704 VA)
|
|
2 U2/VB second interface (SHDSL U2 or G.704 VB)
|
|
3 U3/VC third interface (SHDSL U3 or G.704 VC)
|
|
4 U4/VD fourth interface (SHDSL U4 or G.704 VD)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 40 }
|
|
|
|
cmroHtuLocalMcsFarCh1aIsRemCh OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
first(1),
|
|
second(2),
|
|
third(3),
|
|
fourth(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates MCS channel crossover. This variable shows which
|
|
MCS channel the remote channel a is conntected to on the local
|
|
end MCS device.
|
|
1 U1/VA first interface (SHDSL U1 or G.704 VA)
|
|
2 U2/VB second interface (SHDSL U2 or G.704 VB)
|
|
3 U3/VC third interface (SHDSL U3 or G.704 VC)
|
|
4 U4/VD fourth interface (SHDSL U4 or G.704 VD)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 41 }
|
|
|
|
cmroHtuLocalMcsFarCh2bIsRemCh OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
first(1),
|
|
second(2),
|
|
third(3),
|
|
fourth(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates MCS channel crossover. This variable shows which
|
|
MCS channel the remote channel b is conntected to on the local
|
|
end MCS device.
|
|
1 U1/VA first interface (SHDSL U1 or G.704 VA)
|
|
2 U2/VB second interface (SHDSL U2 or G.704 VB)
|
|
3 U3/VC third interface (SHDSL U3 or G.704 VC)
|
|
4 U4/VD fourth interface (SHDSL U4 or G.704 VD)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 42 }
|
|
|
|
cmroHtuLocalMcsFarCh3cIsRemCh OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
first(1),
|
|
second(2),
|
|
third(3),
|
|
fourth(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates MCS channel crossover. This variable shows which
|
|
MCS channel the remote channel c is conntected to on the local
|
|
end MCS device.
|
|
1 U1/VA first interface (SHDSL U1 or G.704 VA)
|
|
2 U2/VB second interface (SHDSL U2 or G.704 VB)
|
|
3 U3/VC third interface (SHDSL U3 or G.704 VC)
|
|
4 U4/VD fourth interface (SHDSL U4 or G.704 VD)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 43 }
|
|
|
|
cmroHtuLocalMcsFarCh4dIsRemCh OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
first(1),
|
|
second(2),
|
|
third(3),
|
|
fourth(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates MCS channel crossover. This variable shows which
|
|
MCS channel the remote channel d is conntected to on the local
|
|
end MCS device.
|
|
1 U1/VA first interface (SHDSL U1 or G.704 VA)
|
|
2 U2/VB second interface (SHDSL U2 or G.704 VB)
|
|
3 U3/VC third interface (SHDSL U3 or G.704 VC)
|
|
4 U4/VD fourth interface (SHDSL U4 or G.704 VD)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuLocalEntry 44 }
|
|
|
|
cmroHtuLocalDslChipset OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of xDSL chipset"
|
|
::= { cmroHtuLocalEntry 45 }
|
|
|
|
cmroHtuLocalDslFwLoad OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of firmware load of xDSL chipset"
|
|
::= { cmroHtuLocalEntry 46 }
|
|
|
|
cmroHtuLocalFpgaLoad OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of FPGA load"
|
|
::= { cmroHtuLocalEntry 47 }
|
|
|
|
cmroHtuLocalEthWanChip OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of WAN chip which connects L2 switch and xDSL link"
|
|
::= { cmroHtuLocalEntry 48 }
|
|
|
|
cmroHtuLocalSwitchChip OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Switch Chip"
|
|
::= { cmroHtuLocalEntry 49 }
|
|
|
|
cmroHtuLocalBootloaderVers OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of firmware boot loader"
|
|
::= { cmroHtuLocalEntry 50 }
|
|
|
|
cmroHtuLocalSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Serial number of device"
|
|
::= { cmroHtuLocalEntry 51 }
|
|
|
|
cmroHtuLocalHwManufacturingDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturing Date of the motherboard"
|
|
::= { cmroHtuLocalEntry 52 }
|
|
|
|
cmroHtuLocalRpsManufacturingDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturing Date of the RPS Module"
|
|
::= { cmroHtuLocalEntry 53 }
|
|
|
|
cmroHtuLocalClkManufacturingDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturing Date of the Clock and Alarm Module"
|
|
::= { cmroHtuLocalEntry 54 }
|
|
|
|
cmroHtuLocalTManufacturingDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturing Date of the 2Mbps Module"
|
|
::= { cmroHtuLocalEntry 55 }
|
|
|
|
cmroHtuLocalDManufacturingDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturing Date of the Data Module"
|
|
::= { cmroHtuLocalEntry 56 }
|
|
|
|
cmroHtuLocalPacketManufacturingDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturing Date of the Packet Module"
|
|
::= { cmroHtuLocalEntry 57 }
|
|
|
|
cmroHtuLocalL2SDriverVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"L2 Switch Driver Version"
|
|
::= { cmroHtuLocalEntry 58 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RO HTU-far
|
|
--------------------------------------------------------------------------------
|
|
cmroHtuFarTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmroHtuFarEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmro 2 }
|
|
|
|
cmroHtuFarEntry OBJECT-TYPE
|
|
SYNTAX CmroHtuFarEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmroHtuFarPortIndex, cmroHtuFarLinkIndex }
|
|
::= { cmroHtuFarTable 1 }
|
|
|
|
CmroHtuFarEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmroHtuFarPortIndex INTEGER,
|
|
cmroHtuFarLinkIndex INTEGER,
|
|
cmroHtuFarHwFabData DisplayString,
|
|
cmroHtuFarActFwType DisplayString,
|
|
cmroHtuFarActFwVers DisplayString,
|
|
cmroHtuFarPasBankState INTEGER,
|
|
cmroHtuFarPasFwType DisplayString,
|
|
cmroHtuFarPasFwVers DisplayString,
|
|
cmroHtuFarSeepromVers DisplayString,
|
|
cmroHtuFarDFabData DisplayString,
|
|
cmroHtuFarDType INTEGER,
|
|
cmroHtuFarTFabData DisplayString,
|
|
cmroHtuFarTType INTEGER,
|
|
cmroHtuFarRpsFabData DisplayString,
|
|
cmroHtuFarRpsType INTEGER,
|
|
cmroHtuFarClkFabData DisplayString,
|
|
cmroHtuFarClkType INTEGER,
|
|
cmroHtuFarDbgFabData DisplayString,
|
|
cmroHtuFarDbgType INTEGER,
|
|
cmroHtuFarHousing INTEGER,
|
|
cmroHtuFarRackVersion INTEGER,
|
|
cmroHtuFarLtNtType INTEGER,
|
|
cmroHtuFarHdslChipset INTEGER,
|
|
cmroHtuFarDipCfg INTEGER,
|
|
cmroHtuFarEocCfg INTEGER,
|
|
cmroHtuFarRpsVoltage INTEGER,
|
|
cmroHtuFarPowerConfiguration INTEGER,
|
|
cmroHtuFarIsdnFabData DisplayString,
|
|
cmroHtuFarIsdnType INTEGER,
|
|
cmroHtuFarTipRingReversal1 INTEGER,
|
|
cmroHtuFarTipRingReversal2 INTEGER,
|
|
cmroHtuFarTipRingReversal3 INTEGER,
|
|
cmroHtuFarTipRingReversal4 INTEGER,
|
|
cmroHtuFarPacketFabData DisplayString,
|
|
cmroHtuFarPacketType INTEGER,
|
|
cmroHtuFarPacketMacAddr1 OCTET STRING,
|
|
cmroHtuFarDslChipset DisplayString,
|
|
cmroHtuFarDslFwLoad DisplayString,
|
|
cmroHtuFarFpgaLoad DisplayString,
|
|
cmroHtuFarEthWanChip DisplayString,
|
|
cmroHtuFarSwitchChip DisplayString,
|
|
cmroHtuFarBootloaderVers DisplayString,
|
|
cmroHtuFarSerialNumber DisplayString,
|
|
cmroHtuFarHwManufacturingDate DisplayString,
|
|
cmroHtuFarRpsManufacturingDate DisplayString,
|
|
cmroHtuFarClkManufacturingDate DisplayString,
|
|
cmroHtuFarTManufacturingDate DisplayString,
|
|
cmroHtuFarDManufacturingDate DisplayString,
|
|
cmroHtuFarPacketManufacturingDate DisplayString,
|
|
cmroHtuFarL2SDriverVersion DisplayString
|
|
}
|
|
|
|
cmroHtuFarPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroHtuFarEntry 1 }
|
|
|
|
cmroHtuFarLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroHtuFarEntry 2 }
|
|
|
|
cmroHtuFarHwFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Device Hardware Fabrication Data"
|
|
::= { cmroHtuFarEntry 3 }
|
|
|
|
cmroHtuFarActFwType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of active Firmware"
|
|
::= { cmroHtuFarEntry 4 }
|
|
|
|
cmroHtuFarActFwVers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of active Firmware"
|
|
::= { cmroHtuFarEntry 5 }
|
|
|
|
cmroHtuFarPasBankState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
loaded(2),
|
|
foreign(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of passive firmware bank
|
|
1 Empty contains no firmware
|
|
2 Loaded contains a valid firmware
|
|
3 Foreign contains regenerator firmware
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuFarEntry 6 }
|
|
|
|
cmroHtuFarPasFwType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of passive firmware"
|
|
::= { cmroHtuFarEntry 7 }
|
|
|
|
cmroHtuFarPasFwVers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of passive firmware"
|
|
::= { cmroHtuFarEntry 8 }
|
|
|
|
cmroHtuFarSeepromVers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of SEEPROM data format"
|
|
::= { cmroHtuFarEntry 9 }
|
|
|
|
cmroHtuFarDFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Data-Module"
|
|
::= { cmroHtuFarEntry 10 }
|
|
|
|
cmroHtuFarDType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
dce(2),
|
|
dte(3),
|
|
tenBaseT(4),
|
|
abar(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Data-Module in corresponding module-slot of the device.
|
|
1 None No module inserted
|
|
2 DCE Data module with DCE configuration
|
|
3 DTE Data module with DTE configuration
|
|
4 10Base-T 10Base-T Ethernet module
|
|
5 ABAR Advanced Bridge and Router module
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
|
|
For details of the module (connector sub-types, ...) the
|
|
fabrication data has to evaluated"
|
|
::= { cmroHtuFarEntry 11 }
|
|
|
|
cmroHtuFarTFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of 2Mbit-Module"
|
|
::= { cmroHtuFarEntry 12 }
|
|
|
|
cmroHtuFarTType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
twoMbps(2),
|
|
quadTwoMbps(3),
|
|
codirTwoMbps(4),
|
|
twoMbpsVarImp(5),
|
|
quadTwoMbpsVarImp(6),
|
|
fourTwoMbpsVarImp(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of 2Mbit-Module in corresponding module-slot of the device.
|
|
1 None No module present
|
|
2 TwoMbps A 2Mbit/s module is present
|
|
3 QuadTwoMbps A Quad 2Mbit/s module is present
|
|
4 CodirTwoMbps A Co-Directional G.703 module is present
|
|
5 TwoMbpsVarImp A 2Mbit/s module with variable impedance is present
|
|
6 QuadTwoMbpsVarImp A Quad 2Mbit/s module with variable impedance is present
|
|
7 FourTwoMbpsVarImp Module with four independent 2Mbit/s (variable impedance) is present
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
|
|
For details of the module (connector sub-types, ...) the
|
|
fabrication data has to evaluated"
|
|
::= { cmroHtuFarEntry 13 }
|
|
|
|
cmroHtuFarRpsFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Remote Power Supply (RPS) Module"
|
|
::= { cmroHtuFarEntry 14 }
|
|
|
|
cmroHtuFarRpsType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
rps(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Remote Power Supply (RPS) Module in corresponding
|
|
module-slot of the device.
|
|
1 None No module inserted
|
|
2 Rps A RPS module is inserted
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
|
|
For details of the module (connector sub-types, ...) the
|
|
fabrication data has to evaluated"
|
|
::= { cmroHtuFarEntry 15 }
|
|
|
|
cmroHtuFarClkFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Clock and Alarm Module"
|
|
::= { cmroHtuFarEntry 16 }
|
|
|
|
cmroHtuFarClkType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
clockAlarm(2),
|
|
clock(3),
|
|
alarm(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Clock and Alarm Module in corresponding
|
|
module-slot of the device.
|
|
1 None No module inserted
|
|
2 ClockAlarm A combined Clock and Alarm module is inserted
|
|
3 Clock A Clock module is inserted
|
|
3 Alarm An Alarm module is inserted
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
|
|
For details of the module (connector sub-types, ...) the
|
|
fabrication data has to evaluated"
|
|
::= { cmroHtuFarEntry 17 }
|
|
|
|
cmroHtuFarDbgFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Debug-Module"
|
|
::= { cmroHtuFarEntry 18 }
|
|
|
|
cmroHtuFarDbgType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
debug(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Debug-Module in corresponding module-slot of the device.
|
|
1 None No module inserted
|
|
2 Debug A Debug module is inserted
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
|
|
For details of the module (connector sub-types, ...) the
|
|
fabrication data has to evaluated"
|
|
::= { cmroHtuFarEntry 19 }
|
|
|
|
cmroHtuFarHousing OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
rack(1),
|
|
desktop(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of housing / installation of the device.
|
|
1 Rack The device is a line card to be installed in a sub-rack
|
|
2 Desktop The device is a desktop device
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuFarEntry 20 }
|
|
|
|
cmroHtuFarRackVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
rackV1(1),
|
|
rackV2(2),
|
|
rackV3(3),
|
|
desktop(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of the sub-rack in which the device is installed.
|
|
1 RackV1 The device is installed in a rack with V1
|
|
2 RackV2 The device is installed in a rack with V2
|
|
3 RackV3 The device is installed in a rack with V3
|
|
4 Desktop The device is a desktop device (and therefore not installed in a sub-rack)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuFarEntry 21 }
|
|
|
|
cmroHtuFarLtNtType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lt(1),
|
|
nt(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the device is configured as LT or NT.
|
|
1 LT The device is configured as LT
|
|
2 NT The device is configured as NT
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuFarEntry 22 }
|
|
|
|
cmroHtuFarHdslChipset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
level1(1),
|
|
metalink(2),
|
|
infineon(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates which chipset the partner device uses for HDSL transmission
|
|
1 Level1 The partner device uses a Level 1 chipset
|
|
2 Metalink The partner device uses a MetaLink chipset
|
|
3 Infineon The partner device uses an Infineon chipset
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuFarEntry 23 }
|
|
|
|
cmroHtuFarDipCfg OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the device is configured through DIP Switches.
|
|
1 Disabled The device can be configured through management software
|
|
2 Enabled The device is configured by DIP switches
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuFarEntry 24 }
|
|
|
|
cmroHtuFarEocCfg OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
reg1(3),
|
|
reg2(4),
|
|
reg3(5),
|
|
reg4(6),
|
|
reg5(7),
|
|
reg6(8),
|
|
reg7(9),
|
|
reg8(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the far device is reached by EOC or not.
|
|
1 Disabled The far device cannot be reached by EOC
|
|
2 Enabled The far device can be reached by EOC
|
|
3 Reg1 The EOC is up until the first regenerator section
|
|
4 Reg2 The EOC is up until the second regenerator section
|
|
5 Reg3 The EOC is up until the third regenerator section
|
|
6 Reg4 The EOC is up until the fourth regenerator section
|
|
7 Reg5 The EOC is up until the fifth regenerator section
|
|
8 Reg6 The EOC is up until the sixth regenerator section
|
|
9 Reg7 The EOC is up until the seventh regenerator section
|
|
10 Reg8 The EOC is up until the eighth regenerator section
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuFarEntry 25 }
|
|
|
|
cmroHtuFarRpsVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
v120(1),
|
|
v180(2),
|
|
noRps(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates which Remote Power Supply (RPS) Voltage is being used by the device
|
|
1 V120 The RPS uses 120 Volts
|
|
2 V180 The RPS uses 180 Volts
|
|
3 NoRps The device is not equipped with an RPS
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuFarEntry 26 }
|
|
|
|
cmroHtuFarPowerConfiguration OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
multifunctional(1),
|
|
redundant(2),
|
|
remoteFeeding(3),
|
|
batteryDC(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates which kind of power supply is equiped
|
|
1 multifunctional No redundant supply possible
|
|
2 redundant Redundant supply possible
|
|
3 remoteFeeding Remote feeding possible
|
|
4 batteryDC DC-only supply
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuFarEntry 27 }
|
|
|
|
|
|
cmroHtuFarIsdnFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of ISDN-Module"
|
|
::= { cmroHtuFarEntry 28 }
|
|
|
|
|
|
cmroHtuFarIsdnType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
te(2),
|
|
nt(3),
|
|
uk0(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of ISDN-Module in corresponding module-slot of the device
|
|
1 None No module inserted
|
|
2 TE A module for S0(TE mode) operation is inserted
|
|
3 NT A module for S0(NT mode) operation is inserted
|
|
4 Uk0 A module for Uk0 operation is inserted
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuFarEntry 29 }
|
|
|
|
|
|
cmroHtuFarTipRingReversal1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(1),
|
|
yes(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether tip-ring reversal has been detected and compensated
|
|
for on the first wire pair
|
|
1 No Reversal not detected
|
|
2 Yes Reversal detected and compensated for
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuFarEntry 30 }
|
|
|
|
|
|
cmroHtuFarTipRingReversal2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(1),
|
|
yes(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether tip-ring reversal has been detected and compensated
|
|
for on the second wire pair
|
|
1 No Reversal not detected
|
|
2 Yes Reversal detected and compensated for
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuFarEntry 31 }
|
|
|
|
cmroHtuFarTipRingReversal3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(1),
|
|
yes(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether tip-ring reversal has been detected and compensated
|
|
for on the third wire pair
|
|
1 No Reversal not detected
|
|
2 Yes Reversal detected and compensated for
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuFarEntry 32 }
|
|
|
|
|
|
cmroHtuFarTipRingReversal4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(1),
|
|
yes(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether tip-ring reversal has been detected and compensated
|
|
for on the fourth wire pair
|
|
1 No Reversal not detected
|
|
2 Yes Reversal detected and compensated for
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroHtuFarEntry 33 }
|
|
|
|
cmroHtuFarPacketFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of L2 Switch"
|
|
::= { cmroHtuFarEntry 34 }
|
|
|
|
cmroHtuFarPacketType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
fourPort10-100(2),
|
|
onePort10-100(3),
|
|
twoPort10-100(4),
|
|
threePort10-100(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of L2 Switch module.
|
|
1 None No module inserted
|
|
2 4P10/100 4-Port 10/100Base-T ethernet switch
|
|
3 1P10/100 1-Port 10/100Base-T ethernet switch
|
|
4 2P10/100 2-Port 10/100Base-T ethernet switch
|
|
5 3P10/100 3-Port 10/100Base-T ethernet switch
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
|
|
For details of the module (connector sub-types, ...) the
|
|
fabrication data has to evaluated"
|
|
::= { cmroHtuFarEntry 35 }
|
|
|
|
cmroHtuFarPacketMacAddr1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MAC address of L2 ethernet switch.
|
|
Value of Byte 0..5 Meaning
|
|
|
|
0x00 - 0xFD MAC address
|
|
all 0xFE unknown value
|
|
all 0xFF unsupported variable"
|
|
::= { cmroHtuFarEntry 36 }
|
|
|
|
cmroHtuFarDslChipset OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of xDSL chipset"
|
|
::= { cmroHtuFarEntry 37 }
|
|
|
|
cmroHtuFarDslFwLoad OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of firmware load of xDSL chipset"
|
|
::= { cmroHtuFarEntry 38 }
|
|
|
|
cmroHtuFarFpgaLoad OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of FPGA load"
|
|
::= { cmroHtuFarEntry 39 }
|
|
|
|
cmroHtuFarEthWanChip OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of WAN chip which connects L2 switch and xDSL link"
|
|
::= { cmroHtuFarEntry 40 }
|
|
|
|
cmroHtuFarSwitchChip OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Switch Chip"
|
|
::= { cmroHtuFarEntry 41 }
|
|
|
|
cmroHtuFarBootloaderVers OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of firmware boot loader"
|
|
::= { cmroHtuFarEntry 42 }
|
|
|
|
cmroHtuFarSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Serial number of device"
|
|
::= { cmroHtuFarEntry 43 }
|
|
|
|
cmroHtuFarHwManufacturingDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturing Date of the motherboard"
|
|
::= { cmroHtuFarEntry 44 }
|
|
|
|
cmroHtuFarRpsManufacturingDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturing Date of the RPS Module"
|
|
::= { cmroHtuFarEntry 45 }
|
|
|
|
cmroHtuFarClkManufacturingDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturing Date of the Clock and Alarm Module"
|
|
::= { cmroHtuFarEntry 46 }
|
|
|
|
cmroHtuFarTManufacturingDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturing Date of the 2Mbps Module"
|
|
::= { cmroHtuFarEntry 47 }
|
|
|
|
cmroHtuFarDManufacturingDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturing Date of the Data Module"
|
|
::= { cmroHtuFarEntry 48 }
|
|
|
|
cmroHtuFarPacketManufacturingDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturing Date of the Packet Module"
|
|
::= { cmroHtuFarEntry 49 }
|
|
|
|
cmroHtuFarL2SDriverVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"L2 Switch Driver Version"
|
|
::= { cmroHtuFarEntry 50 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RO Used TS
|
|
--------------------------------------------------------------------------------
|
|
cmroUsedTsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmroUsedTsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmro 3 }
|
|
|
|
cmroUsedTsEntry OBJECT-TYPE
|
|
SYNTAX CmroUsedTsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmroUsedTsPortIndex, cmroUsedTsLinkIndex }
|
|
::= { cmroUsedTsTable 1 }
|
|
|
|
CmroUsedTsEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmroUsedTsPortIndex INTEGER,
|
|
cmroUsedTsLinkIndex INTEGER,
|
|
cmroUsedTsAll INTEGER,
|
|
cmroUsedTsMap OCTET STRING,
|
|
cmroUsedTsMapStuExtension OCTET STRING
|
|
}
|
|
|
|
cmroUsedTsPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroUsedTsEntry 1 }
|
|
|
|
cmroUsedTsLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroUsedTsEntry 2 }
|
|
|
|
cmroUsedTsAll OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
true(1),
|
|
false(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether all timeslots are used or not. If all of them
|
|
are used, cmroUsedTsMap will return 'allUsed' for all time slots.
|
|
1 true All time slots are being used (ignore cmroUsedTsMap)
|
|
2 false Not all time slots are being used, details in cmroUsedTsMap
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroUsedTsEntry 3 }
|
|
|
|
cmroUsedTsMap OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(32))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If cmroUsedTsAll is 'false(2)' this variable reports which
|
|
time slot in the E1 2Mbit/s signal is used for which purpose.
|
|
The variable consists of an array with length 32. Each array
|
|
position corresponds to a time slot in the E1 signal and
|
|
its content indicates what the time slot is used for.
|
|
The following codes are used:
|
|
1 N1 Used for G.703 signal
|
|
2 N2 Used for Data signal
|
|
3 FastSig1 Used for Fast Signalling in stream 1
|
|
4 FastSig2 Used for Fast Signalling in stream 2
|
|
5 CAS Used for CAS Signalling
|
|
6 Unused Time slot is unused
|
|
7 Sync Used for synchronisation (Time slot 0)
|
|
8 Ignore No mapping (cmroUsedTsAll is 'true')
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroUsedTsEntry 4 }
|
|
|
|
cmroUsedTsMapStuExtension OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If cmroUsedTsAll is 'false(2)' this variable reports which
|
|
time slot in the E1 2Mbit/s signal is used for which purpose.
|
|
|
|
This variable describes the addidtional 4 timeslots which are
|
|
available with the SDSL system. The 4 bytes in this variable
|
|
correspond to the time slots 32..35. Each array position
|
|
corresponds to a time slot in the E1 signal and its content
|
|
indicates what the time slot is used for.
|
|
The following codes are used:
|
|
1 N1 Used for G.703 signal
|
|
2 N2 Used for Data signal
|
|
3 FastSig1 Used for Fast Signalling in stream 1
|
|
4 FastSig2 Used for Fast Signalling in stream 2
|
|
5 CAS Used for CAS Signalling
|
|
6 Unused Time slot is unused
|
|
7 Sync Used for synchronisation (Time slot 0)
|
|
8 Ignore No mapping (cmroUsedTsAll is 'true')
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroUsedTsEntry 5 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RO OMI
|
|
--------------------------------------------------------------------------------
|
|
cmroOmiTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmroOmiEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmro 4 }
|
|
|
|
cmroOmiEntry OBJECT-TYPE
|
|
SYNTAX CmroOmiEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmroOmiPortIndex }
|
|
::= { cmroOmiTable 1 }
|
|
|
|
CmroOmiEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmroOmiPortIndex INTEGER,
|
|
cmroOmiHwFabData DisplayString,
|
|
cmroOmiActFwVers DisplayString,
|
|
cmroOmiPasBankState INTEGER,
|
|
cmroOmiPasFwVers DisplayString,
|
|
cmroOmiRackVersion INTEGER,
|
|
cmroOmiActFwType DisplayString,
|
|
cmroOmiRackVersion2 INTEGER,
|
|
cmroOmiRackVersion3 INTEGER,
|
|
cmroOmiRackVersion4 INTEGER,
|
|
cmroOmiCardLocation INTEGER,
|
|
cmroOmiSeepromVers DisplayString,
|
|
cmroOmiMCUSerialNo DisplayString,
|
|
cmroOmiPasFwType DisplayString,
|
|
cmroOmiBootLoaderVers DisplayString,
|
|
cmroOmiMACAddress OCTET STRING,
|
|
cmroOmiNMSHwPartNo DisplayString,
|
|
cmroOmiNMSChipPartNo DisplayString,
|
|
cmroOmiL2SMACAddress OCTET STRING,
|
|
cmroOmiL2SHwPartNo DisplayString,
|
|
cmroOmiL2SChipPartNo DisplayString,
|
|
cmroOmiL2SFwVers DisplayString,
|
|
cmroOmiL2SFeatureFlags OCTET STRING,
|
|
cmroOmiL2SModuleType INTEGER,
|
|
cmroOmiGBEHwPartNo DisplayString,
|
|
cmroOmiGBEModuleType INTEGER,
|
|
cmroOmiSFP1ModuleType INTEGER,
|
|
cmroOmiSFP1TranscType INTEGER,
|
|
cmroOmiSFP1TranscCode OCTET STRING,
|
|
cmroOmiSFP1VendorName DisplayString,
|
|
cmroOmiSFP1VendorOUI OCTET STRING,
|
|
cmroOmiSFP1VendorPartNo DisplayString,
|
|
cmroOmiSFP1VendorRevNo DisplayString,
|
|
cmroOmiSFP1VendorSerialNo DisplayString,
|
|
cmroOmiSFP1VendorDateCode OCTET STRING,
|
|
cmroOmiSFP2ModuleType INTEGER,
|
|
cmroOmiSFP2TranscType INTEGER,
|
|
cmroOmiSFP2TranscCode OCTET STRING,
|
|
cmroOmiSFP2VendorName DisplayString,
|
|
cmroOmiSFP2VendorOUI OCTET STRING,
|
|
cmroOmiSFP2VendorPartNo DisplayString,
|
|
cmroOmiSFP2VendorRevNo DisplayString,
|
|
cmroOmiSFP2VendorSerialNo DisplayString,
|
|
cmroOmiSFP2VendorDateCode OCTET STRING,
|
|
cmroOmiCESHwPartNo DisplayString,
|
|
cmroOmiCESType INTEGER,
|
|
cmroOmiCESMACAddress OCTET STRING,
|
|
cmroOmiCESSerialNo DisplayString
|
|
}
|
|
|
|
cmroOmiPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroOmiEntry 1 }
|
|
|
|
cmroOmiHwFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hardware Fabrication Data"
|
|
::= { cmroOmiEntry 2 }
|
|
|
|
cmroOmiActFwVers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of active Firmware"
|
|
::= { cmroOmiEntry 3 }
|
|
|
|
cmroOmiPasBankState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
loaded(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of passive firmware bank
|
|
1 Empty contains no firmware
|
|
2 Loaded contains a valid firmware
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroOmiEntry 4 }
|
|
|
|
cmroOmiPasFwVers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of passive firmware"
|
|
::= { cmroOmiEntry 5 }
|
|
|
|
cmroOmiRackVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
rackV1(1),
|
|
rackV2(2),
|
|
rackV3(3),
|
|
desktop(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of the sub-rack in which the device is installed.
|
|
1 RackV1 The device is installed in a rack with V1
|
|
2 RackV2 The device is installed in a rack with V2
|
|
3 RackV3 The device is installed in a rack with V3
|
|
4 Desktop The device is a desktop device (and therefore not installed in a sub-rack)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroOmiEntry 6 }
|
|
|
|
cmroOmiActFwType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the firmware type of the active firmware"
|
|
::= { cmroOmiEntry 7 }
|
|
|
|
cmroOmiRackVersion2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
rackV1(1),
|
|
rackV2(2),
|
|
rackV3(3),
|
|
desktop(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of the sub-rack 2.
|
|
1 RackV1 rack with V1
|
|
2 RackV2 rack with V2
|
|
3 RackV3 rack with V3
|
|
4 Desktop desktop device (and therefore not installed in a sub-rack)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroOmiEntry 8 }
|
|
|
|
cmroOmiRackVersion3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
rackV1(1),
|
|
rackV2(2),
|
|
rackV3(3),
|
|
desktop(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of the sub-rack 3.
|
|
1 RackV1 rack with V1
|
|
2 RackV2 rack with V2
|
|
3 RackV3 rack with V3
|
|
4 Desktop desktop device (and therefore not installed in a sub-rack)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroOmiEntry 9 }
|
|
|
|
cmroOmiRackVersion4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
rackV1(1),
|
|
rackV2(2),
|
|
rackV3(3),
|
|
desktop(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of the sub-rack 4.
|
|
1 RackV1 rack with V1
|
|
2 RackV2 rack with V2
|
|
3 RackV3 rack with V3
|
|
4 Desktop desktop device (and therefore not installed in a sub-rack)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroOmiEntry 10 }
|
|
|
|
cmroOmiCardLocation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Card location in subrack: 0..254"
|
|
::= { cmroOmiEntry 11 }
|
|
|
|
cmroOmiSeepromVers OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(3))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Version of configuration data format"
|
|
::= { cmroOmiEntry 12 }
|
|
|
|
cmroOmiMCUSerialNo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(5))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Serial number of the device"
|
|
::= { cmroOmiEntry 13 }
|
|
|
|
cmroOmiPasFwType OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(5))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the firmware type of the passive firmware"
|
|
::= { cmroOmiEntry 14 }
|
|
|
|
cmroOmiBootLoaderVers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the Boot loader version"
|
|
::= { cmroOmiEntry 15 }
|
|
|
|
cmroOmiMACAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the MCU MAC address
|
|
Value of Byte 0..5 Meaning
|
|
|
|
0x00 - 0xFD MAC address
|
|
all 0xFE unknown value
|
|
all 0xFF unsupported variable"
|
|
::= { cmroOmiEntry 16 }
|
|
|
|
|
|
cmroOmiNMSHwPartNo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the Hw partition number"
|
|
::= { cmroOmiEntry 17 }
|
|
|
|
cmroOmiNMSChipPartNo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the chip partition number"
|
|
::= { cmroOmiEntry 18 }
|
|
|
|
cmroOmiL2SMACAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the MAC Address of L2 switch
|
|
Value of Byte 0..5 Meaning
|
|
|
|
0x00 - 0xFD MAC address
|
|
all 0xFE unknown value
|
|
all 0xFF unsupported variable"
|
|
::= { cmroOmiEntry 19 }
|
|
|
|
cmroOmiL2SHwPartNo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hardware partition number"
|
|
::= { cmroOmiEntry 20 }
|
|
|
|
cmroOmiL2SChipPartNo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Chip partition number"
|
|
::= { cmroOmiEntry 21 }
|
|
|
|
cmroOmiL2SFwVers OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"L2 Switch Firmware version"
|
|
::= { cmroOmiEntry 22 }
|
|
|
|
cmroOmiL2SFeatureFlags OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(128))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"L2 Switch partition feature flags"
|
|
::= { cmroOmiEntry 23 }
|
|
|
|
cmroOmiL2SModuleType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
l2s2GbE16FE(1),
|
|
none(254)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"L2 Switch module type:
|
|
1 24 Fast Ethernet + 3GigaBit Ethernet,
|
|
254 NONE"
|
|
::= { cmroOmiEntry 24 }
|
|
|
|
cmroOmiGBEHwPartNo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Gigabit ethernet Hw partition number"
|
|
::= { cmroOmiEntry 25 }
|
|
|
|
cmroOmiGBEModuleType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
gbe1000BaseT(1),
|
|
none(254)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Gigabit ethernet module type:
|
|
1 1000BASE-T copper,
|
|
254 NONE"
|
|
::= { cmroOmiEntry 26 }
|
|
|
|
cmroOmiSFP1ModuleType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
sfp1000BaseT(1),
|
|
sfp1000BaseSX(2),
|
|
sfp1000BaseLX(3),
|
|
none (254),
|
|
unknown(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP module type.
|
|
Enum type corresponding to accepted values in following two fields:
|
|
1 1000BASE-T copper,
|
|
2 1000BASE-SX short wavelength,
|
|
3 1000BASE-LX long wavelength,
|
|
254 NONE
|
|
255 UNKNOWN
|
|
"
|
|
::= { cmroOmiEntry 27 }
|
|
|
|
cmroOmiSFP1TranscType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP transceiver type (0..255)"
|
|
::= { cmroOmiEntry 28 }
|
|
|
|
cmroOmiSFP1TranscCode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP transceiver code:
|
|
accepted values are those corresponding to module type"
|
|
::= { cmroOmiEntry 29 }
|
|
|
|
cmroOmiSFP1VendorName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(16))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP vendor name"
|
|
::= { cmroOmiEntry 30 }
|
|
|
|
cmroOmiSFP1VendorOUI OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(3))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP IEEE company ID"
|
|
::= { cmroOmiEntry 31 }
|
|
|
|
cmroOmiSFP1VendorPartNo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(16))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP vendor partition number"
|
|
::= { cmroOmiEntry 32 }
|
|
|
|
cmroOmiSFP1VendorRevNo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(4))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP vendor revision number"
|
|
::= { cmroOmiEntry 33 }
|
|
|
|
cmroOmiSFP1VendorSerialNo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(16))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP vendor serial number"
|
|
::= { cmroOmiEntry 34 }
|
|
|
|
cmroOmiSFP1VendorDateCode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP vendor date code
|
|
YYMMDDLL (LL=vendor specific lot code)"
|
|
::= { cmroOmiEntry 35 }
|
|
|
|
|
|
cmroOmiSFP2ModuleType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
sfp1000BaseT(1),
|
|
sfp1000BaseSX(2),
|
|
sfp1000BaseLX(3),
|
|
none (254),
|
|
unknown(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP module type.
|
|
Enum type corresponding to accepted values in following two fields:
|
|
1 1000BASE-T copper,
|
|
2 1000BASE-SX short wavelength,
|
|
3 1000BASE-LX long wavelength,
|
|
254 NONE
|
|
255 UNKNOWN
|
|
"
|
|
::= { cmroOmiEntry 36 }
|
|
|
|
cmroOmiSFP2TranscType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP transceiver type (0..255)"
|
|
::= { cmroOmiEntry 37 }
|
|
|
|
cmroOmiSFP2TranscCode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP transceiver code:
|
|
accepted values are those corresponding to module type"
|
|
::= { cmroOmiEntry 38 }
|
|
|
|
cmroOmiSFP2VendorName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(16))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP vendor name"
|
|
::= { cmroOmiEntry 39 }
|
|
|
|
cmroOmiSFP2VendorOUI OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(3))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP IEEE company ID"
|
|
::= { cmroOmiEntry 40 }
|
|
|
|
cmroOmiSFP2VendorPartNo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(16))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP vendor partition number"
|
|
::= { cmroOmiEntry 41 }
|
|
|
|
cmroOmiSFP2VendorRevNo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(4))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP vendor revision number"
|
|
::= { cmroOmiEntry 42 }
|
|
|
|
cmroOmiSFP2VendorSerialNo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(16))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP vendor serial number"
|
|
::= { cmroOmiEntry 43 }
|
|
|
|
cmroOmiSFP2VendorDateCode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP vendor date code
|
|
YYMMDDLL (LL=vendor specific lot code)"
|
|
::= { cmroOmiEntry 44 }
|
|
|
|
cmroOmiCESHwPartNo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CES HW part number"
|
|
::= { cmroOmiEntry 45 }
|
|
|
|
cmroOmiCESType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
thirtyTwoE1tcxo(2),
|
|
thirtyTwoE1ocxo(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CES type:
|
|
1 None No CES available
|
|
2 ThirtyTwoE1tcxo 32 x E1 with Temperature Compensated Crystal Oscillator
|
|
3 ThirtyTwoE1ocxo 32 x E1 with Oven Compensated Crystal Oscillator
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroOmiEntry 46 }
|
|
|
|
cmroOmiCESMACAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the MAC Address of CES
|
|
Value of Byte 0..5 Meaning
|
|
|
|
0x00 - 0xFD MAC address
|
|
all 0xFE unknown value
|
|
all 0xFF unsupported variable"
|
|
::= { cmroOmiEntry 47 }
|
|
|
|
cmroOmiCESSerialNo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(5))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Serial number of CES"
|
|
::= { cmroOmiEntry 48 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RO HDSL Regenerator
|
|
--------------------------------------------------------------------------------
|
|
cmroRegTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmroRegEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmro 5 }
|
|
|
|
cmroRegEntry OBJECT-TYPE
|
|
SYNTAX CmroRegEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmroRegPortIndex, cmroRegLinkIndex }
|
|
::= { cmroRegTable 1 }
|
|
|
|
CmroRegEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmroRegPortIndex INTEGER,
|
|
cmroRegLinkIndex INTEGER,
|
|
cmroRegNumReg1 INTEGER,
|
|
cmroRegNumReg2 INTEGER,
|
|
cmroRegFabData1A DisplayString,
|
|
cmroRegFwVers1A DisplayString,
|
|
cmroRegFabData2A DisplayString,
|
|
cmroRegFwVers2A DisplayString,
|
|
cmroRegFabData1B DisplayString,
|
|
cmroRegFwVers1B DisplayString,
|
|
cmroRegFabData2B DisplayString,
|
|
cmroRegFwVers2B DisplayString,
|
|
cmroRegTipRingReversal1ALt INTEGER,
|
|
cmroRegTipRingReversal1ANt INTEGER,
|
|
cmroRegTipRingReversal2ALt INTEGER,
|
|
cmroRegTipRingReversal2ANt INTEGER,
|
|
cmroRegTipRingReversal1BLt INTEGER,
|
|
cmroRegTipRingReversal1BNt INTEGER,
|
|
cmroRegTipRingReversal2BLt INTEGER,
|
|
cmroRegTipRingReversal2BNt INTEGER
|
|
}
|
|
|
|
cmroRegPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroRegEntry 1 }
|
|
|
|
cmroRegLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroRegEntry 2 }
|
|
|
|
cmroRegNumReg1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
one(2),
|
|
two(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of Regenerators in HDSL Path 1.
|
|
1 None No Regenerators
|
|
2 One One Regenerator (A)
|
|
3 Two Two Regenerators (A and B)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroRegEntry 3 }
|
|
|
|
cmroRegNumReg2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
one(2),
|
|
two(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of Regenerators in HDSL Path 2.
|
|
1 None No Regenerators
|
|
2 One One Regenerator (A)
|
|
3 Two Two Regenerators (A and B)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroRegEntry 4 }
|
|
|
|
cmroRegFabData1A OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Regenerator Section A in HDSL Path 1"
|
|
::= { cmroRegEntry 5 }
|
|
|
|
cmroRegFwVers1A OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Firmware Version of Regenerator Section A in HDSL Path 1"
|
|
::= { cmroRegEntry 6 }
|
|
|
|
cmroRegFabData2A OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Regenerator Section A in HDSL Path 2"
|
|
::= { cmroRegEntry 7 }
|
|
|
|
cmroRegFwVers2A OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Firmware Version of Regenerator Section A in HDSL Path 2"
|
|
::= { cmroRegEntry 8 }
|
|
|
|
cmroRegFabData1B OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Regenerator Section B in HDSL Path 1"
|
|
::= { cmroRegEntry 9 }
|
|
|
|
cmroRegFwVers1B OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Firmware Version of Regenerator Section B in HDSL Path 1"
|
|
::= { cmroRegEntry 10 }
|
|
|
|
cmroRegFabData2B OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Regenerator Section B in HDSL Path 2"
|
|
::= { cmroRegEntry 11 }
|
|
|
|
cmroRegFwVers2B OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Firmware Version of Regenerator Section B in HDSL Path 2"
|
|
::= { cmroRegEntry 12 }
|
|
|
|
cmroRegTipRingReversal1ALt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unused variable. Only used for compatibility reasons.
|
|
Refer to cmroSruTipRingReversalLt and cmroSruTipRingReversalNt.
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroRegEntry 13 }
|
|
|
|
cmroRegTipRingReversal1ANt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unused variable. Only used for compatibility reasons.
|
|
Refer to cmroSruTipRingReversalLt and cmroSruTipRingReversalNt.
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroRegEntry 14 }
|
|
|
|
cmroRegTipRingReversal2ALt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unused variable. Only used for compatibility reasons.
|
|
Refer to cmroSruTipRingReversalLt and cmroSruTipRingReversalNt.
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroRegEntry 15 }
|
|
|
|
cmroRegTipRingReversal2ANt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unused variable. Only used for compatibility reasons.
|
|
Refer to cmroSruTipRingReversalLt and cmroSruTipRingReversalNt.
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroRegEntry 16 }
|
|
|
|
cmroRegTipRingReversal1BLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unused variable. Only used for compatibility reasons.
|
|
Refer to cmroSruTipRingReversalLt and cmroSruTipRingReversalNt.
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroRegEntry 17 }
|
|
|
|
cmroRegTipRingReversal1BNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unused variable. Only used for compatibility reasons.
|
|
Refer to cmroSruTipRingReversalLt and cmroSruTipRingReversalNt.
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroRegEntry 18 }
|
|
|
|
cmroRegTipRingReversal2BLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unused variable. Only used for compatibility reasons.
|
|
Refer to cmroSruTipRingReversalLt and cmroSruTipRingReversalNt.
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroRegEntry 19 }
|
|
|
|
cmroRegTipRingReversal2BNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unused variable. Only used for compatibility reasons.
|
|
Refer to cmroSruTipRingReversalLt and cmroSruTipRingReversalNt.
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroRegEntry 20 }
|
|
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RO SHDSL Regenerator
|
|
--------------------------------------------------------------------------------
|
|
cmroSruTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmroSruEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmro 6 }
|
|
|
|
cmroSruEntry OBJECT-TYPE
|
|
SYNTAX CmroSruEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmroSruPortIndex, cmroSruLinkIndex, cmroSruRegIndex }
|
|
::= { cmroSruTable 1 }
|
|
|
|
CmroSruEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmroSruPortIndex INTEGER,
|
|
cmroSruLinkIndex INTEGER,
|
|
cmroSruRegIndex INTEGER,
|
|
cmroSruFabData DisplayString,
|
|
cmroSruActFwType DisplayString,
|
|
cmroSruActFwVers DisplayString,
|
|
cmroSruPasBankState INTEGER,
|
|
cmroSruPasFwType DisplayString,
|
|
cmroSruPasFwVers DisplayString,
|
|
cmroSruTipRingReversalLt INTEGER,
|
|
cmroSruTipRingReversalNt INTEGER,
|
|
cmroSruRedundantlyPowered INTEGER,
|
|
cmroSruPowerPassThrough INTEGER,
|
|
cmroSruSerialNumber DisplayString,
|
|
cmroSruHwManufacturingDate DisplayString
|
|
}
|
|
|
|
cmroSruPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroSruEntry 1 }
|
|
|
|
cmroSruLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroSruEntry 2 }
|
|
|
|
cmroSruRegIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
reg11(3),
|
|
reg12(4),
|
|
reg21(5),
|
|
reg22(6),
|
|
reg31(7),
|
|
reg32(8),
|
|
reg41(9),
|
|
reg42(10),
|
|
reg51(11),
|
|
reg52(12),
|
|
reg61(13),
|
|
reg62(14),
|
|
reg71(15),
|
|
reg72(16),
|
|
reg81(17),
|
|
reg82(18),
|
|
reg13(19),
|
|
reg14(20),
|
|
reg23(21),
|
|
reg24(22),
|
|
reg33(23),
|
|
reg34(24),
|
|
reg43(25),
|
|
reg44(26),
|
|
reg53(27),
|
|
reg54(28),
|
|
reg63(29),
|
|
reg64(30),
|
|
reg73(31),
|
|
reg74(32),
|
|
reg83(33),
|
|
reg84(34)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the regenerator device and is
|
|
used as index for the other elements in the Table"
|
|
::= { cmroSruEntry 3 }
|
|
|
|
cmroSruFabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Regenerator"
|
|
::= { cmroSruEntry 5 }
|
|
|
|
cmroSruActFwType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Active firmware Type of Regenerator"
|
|
::= { cmroSruEntry 6 }
|
|
|
|
cmroSruActFwVers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Active firmware Version of Regenerator"
|
|
::= { cmroSruEntry 7 }
|
|
|
|
cmroSruPasBankState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
loaded(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of passive firmware bank
|
|
1 Empty contains no firmware
|
|
2 Loaded contains a valid firmware
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroSruEntry 8 }
|
|
|
|
cmroSruPasFwType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Passive firmware Type of Regenerator"
|
|
::= { cmroSruEntry 9 }
|
|
|
|
cmroSruPasFwVers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Passive firmware Version of Regenerator"
|
|
::= { cmroSruEntry 10 }
|
|
|
|
cmroSruTipRingReversalLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(1),
|
|
yes(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether tip-ring reversal has been detected and compensated
|
|
for in direction of the LT
|
|
1 No Reversal not detected
|
|
2 Yes Reversal detected and compensated for
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroSruEntry 11 }
|
|
|
|
cmroSruTipRingReversalNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(1),
|
|
yes(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether tip-ring reversal has been detected and compensated
|
|
for in direction of the NT
|
|
1 No Reversal not detected
|
|
2 Yes Reversal detected and compensated for
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroSruEntry 12 }
|
|
|
|
cmroSruRedundantlyPowered OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(1),
|
|
yes(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the regenerator is being redundantly powered
|
|
1 No Regenerator is not being redundantly powered
|
|
2 Yes Regenerator is being redundantly powered
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroSruEntry 13 }
|
|
|
|
cmroSruPowerPassThrough OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(1),
|
|
yes(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the regenerator is passing power
|
|
through to the next regenerator section.
|
|
1 No Regenerator is not passing through power
|
|
2 Yes Regenerator is passing through power
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroSruEntry 14 }
|
|
|
|
cmroSruSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Serial number of regenerator"
|
|
::= { cmroSruEntry 15 }
|
|
|
|
cmroSruHwManufacturingDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manufacturing Date of the motherboard"
|
|
::= { cmroSruEntry 16 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RO Card Token
|
|
--------------------------------------------------------------------------------
|
|
cmroCardTokenTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmroCardTokenEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmro 7 }
|
|
|
|
cmroCardTokenEntry OBJECT-TYPE
|
|
SYNTAX CmroCardTokenEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmroCardTokenPortIndex, cmroCardTokenLinkIndex }
|
|
::= { cmroCardTokenTable 1 }
|
|
|
|
CmroCardTokenEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmroCardTokenPortIndex INTEGER,
|
|
cmroCardTokenLinkIndex INTEGER,
|
|
cmroCardTokenResId1 INTEGER,
|
|
cmroCardTokenResId2 INTEGER,
|
|
cmroCardTokenResId3 INTEGER,
|
|
cmroCardTokenResId4 INTEGER
|
|
}
|
|
|
|
cmroCardTokenPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroCardTokenEntry 1 }
|
|
|
|
cmroCardTokenLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroCardTokenEntry 2 }
|
|
|
|
cmroCardTokenResId1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
available(1),
|
|
lineint(2),
|
|
lct(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates who is in posession of the reservation token for system one.
|
|
1 Available The token is free
|
|
2 Lineint The token is given to the LineIntegrator
|
|
3 Lct The token is given to the Local Craft Terminal (LCT)
|
|
254 unknown value
|
|
255 unsupported variable for the addressed device"
|
|
::= { cmroCardTokenEntry 3 }
|
|
|
|
cmroCardTokenResId2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
available(1),
|
|
lineint(2),
|
|
lct(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates who is in posession of the reservation token for system two.
|
|
1 Available The token is free
|
|
2 Lineint The token is given to the LineIntegrator
|
|
3 Lct The token is given to the Local Craft Terminal (LCT)
|
|
254 unknown value
|
|
255 unsupported variable for the addressed device"
|
|
::= { cmroCardTokenEntry 4 }
|
|
|
|
cmroCardTokenResId3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
available(1),
|
|
lineint(2),
|
|
lct(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates who is in posession of the reservation token for system three.
|
|
1 Available The token is free
|
|
2 Lineint The token is given to the LineIntegrator
|
|
3 Lct The token is given to the Local Craft Terminal (LCT)
|
|
254 unknown value
|
|
255 unsupported variable for the addressed device"
|
|
::= { cmroCardTokenEntry 5 }
|
|
|
|
cmroCardTokenResId4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
available(1),
|
|
lineint(2),
|
|
lct(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates who is in posession of the reservation token for system four.
|
|
1 Available The token is free
|
|
2 Lineint The token is given to the LineIntegrator
|
|
3 Lct The token is given to the Local Craft Terminal (LCT)
|
|
254 unknown value
|
|
255 unsupported variable for the addressed device"
|
|
::= { cmroCardTokenEntry 6 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RO sub OIDs
|
|
--------------------------------------------------------------------------------
|
|
cmroLocalInventory OBJECT IDENTIFIER ::= { cmro 8 }
|
|
cmroFarInventory OBJECT IDENTIFIER ::= { cmro 9 }
|
|
cmroSruInventory OBJECT IDENTIFIER ::= { cmro 10 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RO Local Inventory FrontPanel
|
|
--------------------------------------------------------------------------------
|
|
cmroLocalInventoryFpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmroLocalInventoryFpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmroLocalInventory 1 }
|
|
|
|
cmroLocalInventoryFpEntry OBJECT-TYPE
|
|
SYNTAX CmroLocalInventoryFpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmroLocalInventoryFpPortIndex, cmroLocalInventoryFpLinkIndex }
|
|
::= { cmroLocalInventoryFpTable 1 }
|
|
|
|
CmroLocalInventoryFpEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmroLocalInventoryFpPortIndex INTEGER,
|
|
cmroLocalInventoryFpLinkIndex INTEGER,
|
|
cmroLocalInventoryFpModule1Type INTEGER,
|
|
cmroLocalInventoryFpModule2Type INTEGER,
|
|
cmroLocalInventoryFpModule3Type INTEGER,
|
|
cmroLocalInventoryFpModule4Type INTEGER,
|
|
cmroLocalInventoryFpModule5Type INTEGER,
|
|
cmroLocalInventoryFpModule6Type INTEGER,
|
|
cmroLocalInventoryFpModule1FabData DisplayString,
|
|
cmroLocalInventoryFpModule2FabData DisplayString,
|
|
cmroLocalInventoryFpModule3FabData DisplayString,
|
|
cmroLocalInventoryFpModule4FabData DisplayString,
|
|
cmroLocalInventoryFpModule5FabData DisplayString,
|
|
cmroLocalInventoryFpModule6FabData DisplayString
|
|
}
|
|
|
|
cmroLocalInventoryFpPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroLocalInventoryFpEntry 1 }
|
|
|
|
cmroLocalInventoryFpLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroLocalInventoryFpEntry 2 }
|
|
|
|
cmroLocalInventoryFpModule1Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
dce(2),
|
|
dte(3),
|
|
tenBaseT(4),
|
|
abar(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Front Panel Module 1
|
|
1 None No module
|
|
2 DCE DCE module
|
|
3 DTE DTE module
|
|
4 10Base-T 10Base-T Ethernet module
|
|
5 ABAR Advanced Bridge and Router module
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroLocalInventoryFpEntry 3 }
|
|
|
|
cmroLocalInventoryFpModule2Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
dce(2),
|
|
dte(3),
|
|
tenBaseT(4),
|
|
abar(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Front Panel Module 2
|
|
1 None No module
|
|
2 DCE DCE module
|
|
3 DTE DTE module
|
|
4 10Base-T 10Base-T Ethernet module
|
|
5 ABAR Advanced Bridge and Router module
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroLocalInventoryFpEntry 4 }
|
|
|
|
cmroLocalInventoryFpModule3Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
dce(2),
|
|
dte(3),
|
|
tenBaseT(4),
|
|
abar(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Front Panel Module 3
|
|
1 None No module
|
|
2 DCE DCE module
|
|
3 DTE DTE module
|
|
4 10Base-T 10Base-T Ethernet module
|
|
5 ABAR Advanced Bridge and Router module
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroLocalInventoryFpEntry 5 }
|
|
|
|
cmroLocalInventoryFpModule4Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
dce(2),
|
|
dte(3),
|
|
tenBaseT(4),
|
|
abar(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Front Panel Module 4
|
|
1 None No module
|
|
2 DCE DCE module
|
|
3 DTE DTE module
|
|
4 10Base-T 10Base-T Ethernet module
|
|
5 ABAR Advanced Bridge and Router module
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroLocalInventoryFpEntry 6 }
|
|
|
|
cmroLocalInventoryFpModule5Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
dce(2),
|
|
dte(3),
|
|
tenBaseT(4),
|
|
abar(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Front Panel Module 5
|
|
1 None No module
|
|
2 DCE DCE module
|
|
3 DTE DTE module
|
|
4 10Base-T 10Base-T Ethernet module
|
|
5 ABAR Advanced Bridge and Router module
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroLocalInventoryFpEntry 7 }
|
|
|
|
cmroLocalInventoryFpModule6Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
dce(2),
|
|
dte(3),
|
|
tenBaseT(4),
|
|
abar(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Front Panel Module 6
|
|
1 None No module
|
|
2 DCE DCE module
|
|
3 DTE DTE module
|
|
4 10Base-T 10Base-T Ethernet module
|
|
5 ABAR Advanced Bridge and Router module
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroLocalInventoryFpEntry 8 }
|
|
|
|
cmroLocalInventoryFpModule1FabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Front Panel Module 1"
|
|
::= { cmroLocalInventoryFpEntry 9 }
|
|
|
|
cmroLocalInventoryFpModule2FabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Front Panel Module 2"
|
|
::= { cmroLocalInventoryFpEntry 10 }
|
|
|
|
cmroLocalInventoryFpModule3FabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Front Panel Module 3"
|
|
::= { cmroLocalInventoryFpEntry 11 }
|
|
|
|
cmroLocalInventoryFpModule4FabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Front Panel Module 4"
|
|
::= { cmroLocalInventoryFpEntry 12 }
|
|
|
|
cmroLocalInventoryFpModule5FabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Front Panel Module 5"
|
|
::= { cmroLocalInventoryFpEntry 13 }
|
|
|
|
cmroLocalInventoryFpModule6FabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Front Panel Module 6"
|
|
::= { cmroLocalInventoryFpEntry 14 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RO Local Inventory Info
|
|
--------------------------------------------------------------------------------
|
|
cmroLocalInventoryInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmroLocalInventoryInfoEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmroLocalInventory 2 }
|
|
|
|
cmroLocalInventoryInfoEntry OBJECT-TYPE
|
|
SYNTAX CmroLocalInventoryInfoEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmroLocalInventoryInfoPortIndex, cmroLocalInventoryInfoLinkIndex }
|
|
::= { cmroLocalInventoryInfoTable 1 }
|
|
|
|
CmroLocalInventoryInfoEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmroLocalInventoryInfoPortIndex INTEGER,
|
|
cmroLocalInventoryInfoLinkIndex INTEGER,
|
|
cmroLocalInventoryInfoString1Type INTEGER,
|
|
cmroLocalInventoryInfoString2Type INTEGER,
|
|
cmroLocalInventoryInfoString3Type INTEGER,
|
|
cmroLocalInventoryInfoString4Type INTEGER,
|
|
cmroLocalInventoryInfoString5Type INTEGER,
|
|
cmroLocalInventoryInfoString1 DisplayString,
|
|
cmroLocalInventoryInfoString2 DisplayString,
|
|
cmroLocalInventoryInfoString3 DisplayString,
|
|
cmroLocalInventoryInfoString4 DisplayString,
|
|
cmroLocalInventoryInfoString5 DisplayString
|
|
}
|
|
|
|
cmroLocalInventoryInfoPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroLocalInventoryInfoEntry 1 }
|
|
|
|
cmroLocalInventoryInfoLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroLocalInventoryInfoEntry 2 }
|
|
|
|
cmroLocalInventoryInfoString1Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
dslChip(2),
|
|
dslFirmwareLoad(3),
|
|
fpgaLoad(4),
|
|
ethWanChip(5),
|
|
l2sChip(6),
|
|
bootLoaderVersion(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of InfoString 1
|
|
1 Empty InfoString is empty
|
|
2 DSL Chip InfoString is related to the DSL Chip
|
|
3 DSL Firmware Load InfoString is related to the DSL Firmware Load
|
|
4 FPGA Load InfoString is related to the FPGA Load
|
|
5 ETH WAN Chip InfoString is related to the Ethernet WAN Chip
|
|
5 L2S Chip InfoString is related to the Layer2 Switch Chip
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroLocalInventoryInfoEntry 3 }
|
|
|
|
cmroLocalInventoryInfoString2Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
dslChip(2),
|
|
dslFirmwareLoad(3),
|
|
fpgaLoad(4),
|
|
ethWanChip(5),
|
|
l2sChip(6),
|
|
bootLoaderVersion(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of InfoString 2
|
|
1 Empty InfoString is empty
|
|
2 DSL Chip InfoString is related to the DSL Chip
|
|
3 DSL Firmware Load InfoString is related to the DSL Firmware Load
|
|
4 FPGA Load InfoString is related to the FPGA Load
|
|
5 ETH WAN Chip InfoString is related to the Ethernet WAN Chip
|
|
5 L2S Chip InfoString is related to the Layer2 Switch Chip
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroLocalInventoryInfoEntry 4 }
|
|
|
|
cmroLocalInventoryInfoString3Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
dslChip(2),
|
|
dslFirmwareLoad(3),
|
|
fpgaLoad(4),
|
|
ethWanChip(5),
|
|
l2sChip(6),
|
|
bootLoaderVersion(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of InfoString 3
|
|
1 Empty InfoString is empty
|
|
2 DSL Chip InfoString is related to the DSL Chip
|
|
3 DSL Firmware Load InfoString is related to the DSL Firmware Load
|
|
4 FPGA Load InfoString is related to the FPGA Load
|
|
5 ETH WAN Chip InfoString is related to the Ethernet WAN Chip
|
|
5 L2S Chip InfoString is related to the Layer2 Switch Chip
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroLocalInventoryInfoEntry 5 }
|
|
|
|
cmroLocalInventoryInfoString4Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
dslChip(2),
|
|
dslFirmwareLoad(3),
|
|
fpgaLoad(4),
|
|
ethWanChip(5),
|
|
l2sChip(6),
|
|
bootLoaderVersion(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of InfoString 4
|
|
1 Empty InfoString is empty
|
|
2 DSL Chip InfoString is related to the DSL Chip
|
|
3 DSL Firmware Load InfoString is related to the DSL Firmware Load
|
|
4 FPGA Load InfoString is related to the FPGA Load
|
|
5 ETH WAN Chip InfoString is related to the Ethernet WAN Chip
|
|
5 L2S Chip InfoString is related to the Layer2 Switch Chip
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroLocalInventoryInfoEntry 6 }
|
|
|
|
cmroLocalInventoryInfoString5Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
dslChip(2),
|
|
dslFirmwareLoad(3),
|
|
fpgaLoad(4),
|
|
ethWanChip(5),
|
|
l2sChip(6),
|
|
bootLoaderVersion(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of InfoString 5
|
|
1 Empty InfoString is empty
|
|
2 DSL Chip InfoString is related to the DSL Chip
|
|
3 DSL Firmware Load InfoString is related to the DSL Firmware Load
|
|
4 FPGA Load InfoString is related to the FPGA Load
|
|
5 ETH WAN Chip InfoString is related to the Ethernet WAN Chip
|
|
5 L2S Chip InfoString is related to the Layer2 Switch Chip
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroLocalInventoryInfoEntry 7 }
|
|
|
|
cmroLocalInventoryInfoString1 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"InfoString 1"
|
|
::= { cmroLocalInventoryInfoEntry 8 }
|
|
|
|
cmroLocalInventoryInfoString2 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"InfoString 2"
|
|
::= { cmroLocalInventoryInfoEntry 9 }
|
|
|
|
cmroLocalInventoryInfoString3 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"InfoString 3"
|
|
::= { cmroLocalInventoryInfoEntry 10 }
|
|
|
|
cmroLocalInventoryInfoString4 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"InfoString 4"
|
|
::= { cmroLocalInventoryInfoEntry 11 }
|
|
|
|
cmroLocalInventoryInfoString5 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"InfoString 5"
|
|
::= { cmroLocalInventoryInfoEntry 12 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RO Far Inventory FrontPanel
|
|
--------------------------------------------------------------------------------
|
|
cmroFarInventoryFpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmroFarInventoryFpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmroFarInventory 1 }
|
|
|
|
cmroFarInventoryFpEntry OBJECT-TYPE
|
|
SYNTAX CmroFarInventoryFpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmroFarInventoryFpPortIndex, cmroFarInventoryFpLinkIndex }
|
|
::= { cmroFarInventoryFpTable 1 }
|
|
|
|
CmroFarInventoryFpEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmroFarInventoryFpPortIndex INTEGER,
|
|
cmroFarInventoryFpLinkIndex INTEGER,
|
|
cmroFarInventoryFpModule1Type INTEGER,
|
|
cmroFarInventoryFpModule2Type INTEGER,
|
|
cmroFarInventoryFpModule3Type INTEGER,
|
|
cmroFarInventoryFpModule4Type INTEGER,
|
|
cmroFarInventoryFpModule5Type INTEGER,
|
|
cmroFarInventoryFpModule6Type INTEGER,
|
|
cmroFarInventoryFpModule1FabData DisplayString,
|
|
cmroFarInventoryFpModule2FabData DisplayString,
|
|
cmroFarInventoryFpModule3FabData DisplayString,
|
|
cmroFarInventoryFpModule4FabData DisplayString,
|
|
cmroFarInventoryFpModule5FabData DisplayString,
|
|
cmroFarInventoryFpModule6FabData DisplayString
|
|
}
|
|
|
|
cmroFarInventoryFpPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroFarInventoryFpEntry 1 }
|
|
|
|
cmroFarInventoryFpLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroFarInventoryFpEntry 2 }
|
|
|
|
cmroFarInventoryFpModule1Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
dce(2),
|
|
dte(3),
|
|
tenBaseT(4),
|
|
abar(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Front Panel Module 1
|
|
1 None No module
|
|
2 DCE DCE module
|
|
3 DTE DTE module
|
|
4 10Base-T 10Base-T Ethernet module
|
|
5 ABAR Advanced Bridge and Router module
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroFarInventoryFpEntry 3 }
|
|
|
|
cmroFarInventoryFpModule2Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
dce(2),
|
|
dte(3),
|
|
tenBaseT(4),
|
|
abar(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Front Panel Module 2
|
|
1 None No module
|
|
2 DCE DCE module
|
|
3 DTE DTE module
|
|
4 10Base-T 10Base-T Ethernet module
|
|
5 ABAR Advanced Bridge and Router module
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroFarInventoryFpEntry 4 }
|
|
|
|
cmroFarInventoryFpModule3Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
dce(2),
|
|
dte(3),
|
|
tenBaseT(4),
|
|
abar(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Front Panel Module 3
|
|
1 None No module
|
|
2 DCE DCE module
|
|
3 DTE DTE module
|
|
4 10Base-T 10Base-T Ethernet module
|
|
5 ABAR Advanced Bridge and Router module
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroFarInventoryFpEntry 5 }
|
|
|
|
cmroFarInventoryFpModule4Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
dce(2),
|
|
dte(3),
|
|
tenBaseT(4),
|
|
abar(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Front Panel Module 4
|
|
1 None No module
|
|
2 DCE DCE module
|
|
3 DTE DTE module
|
|
4 10Base-T 10Base-T Ethernet module
|
|
5 ABAR Advanced Bridge and Router module
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroFarInventoryFpEntry 6 }
|
|
|
|
cmroFarInventoryFpModule5Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
dce(2),
|
|
dte(3),
|
|
tenBaseT(4),
|
|
abar(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Front Panel Module 5
|
|
1 None No module
|
|
2 DCE DCE module
|
|
3 DTE DTE module
|
|
4 10Base-T 10Base-T Ethernet module
|
|
5 ABAR Advanced Bridge and Router module
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroFarInventoryFpEntry 7 }
|
|
|
|
cmroFarInventoryFpModule6Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
dce(2),
|
|
dte(3),
|
|
tenBaseT(4),
|
|
abar(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of Front Panel Module 6
|
|
1 None No module
|
|
2 DCE DCE module
|
|
3 DTE DTE module
|
|
4 10Base-T 10Base-T Ethernet module
|
|
5 ABAR Advanced Bridge and Router module
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroFarInventoryFpEntry 8 }
|
|
|
|
cmroFarInventoryFpModule1FabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Front Panel Module 1"
|
|
::= { cmroFarInventoryFpEntry 9 }
|
|
|
|
cmroFarInventoryFpModule2FabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Front Panel Module 2"
|
|
::= { cmroFarInventoryFpEntry 10 }
|
|
|
|
cmroFarInventoryFpModule3FabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Front Panel Module 3"
|
|
::= { cmroFarInventoryFpEntry 11 }
|
|
|
|
cmroFarInventoryFpModule4FabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Front Panel Module 4"
|
|
::= { cmroFarInventoryFpEntry 12 }
|
|
|
|
cmroFarInventoryFpModule5FabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Front Panel Module 5"
|
|
::= { cmroFarInventoryFpEntry 13 }
|
|
|
|
cmroFarInventoryFpModule6FabData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fabrication Data of Front Panel Module 6"
|
|
::= { cmroFarInventoryFpEntry 14 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RO Far Inventory Info
|
|
--------------------------------------------------------------------------------
|
|
cmroFarInventoryInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmroFarInventoryInfoEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmroFarInventory 2 }
|
|
|
|
cmroFarInventoryInfoEntry OBJECT-TYPE
|
|
SYNTAX CmroFarInventoryInfoEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmroFarInventoryInfoPortIndex, cmroFarInventoryInfoLinkIndex }
|
|
::= { cmroFarInventoryInfoTable 1 }
|
|
|
|
CmroFarInventoryInfoEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmroFarInventoryInfoPortIndex INTEGER,
|
|
cmroFarInventoryInfoLinkIndex INTEGER,
|
|
cmroFarInventoryInfoString1Type INTEGER,
|
|
cmroFarInventoryInfoString2Type INTEGER,
|
|
cmroFarInventoryInfoString3Type INTEGER,
|
|
cmroFarInventoryInfoString4Type INTEGER,
|
|
cmroFarInventoryInfoString5Type INTEGER,
|
|
cmroFarInventoryInfoString1 DisplayString,
|
|
cmroFarInventoryInfoString2 DisplayString,
|
|
cmroFarInventoryInfoString3 DisplayString,
|
|
cmroFarInventoryInfoString4 DisplayString,
|
|
cmroFarInventoryInfoString5 DisplayString
|
|
}
|
|
|
|
cmroFarInventoryInfoPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroFarInventoryInfoEntry 1 }
|
|
|
|
cmroFarInventoryInfoLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroFarInventoryInfoEntry 2 }
|
|
|
|
cmroFarInventoryInfoString1Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
dslChip(2),
|
|
dslFirmwareLoad(3),
|
|
fpgaLoad(4),
|
|
ethWanChip(5),
|
|
l2sChip(6),
|
|
bootLoaderVersion(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of InfoString 1
|
|
1 Empty InfoString is empty
|
|
2 DSL Chip InfoString is related to the DSL Chip
|
|
3 DSL Firmware Load InfoString is related to the DSL Firmware Load
|
|
4 FPGA Load InfoString is related to the FPGA Load
|
|
5 ETH WAN Chip InfoString is related to the Ethernet WAN Chip
|
|
5 L2S Chip InfoString is related to the Layer2 Switch Chip
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroFarInventoryInfoEntry 3 }
|
|
|
|
cmroFarInventoryInfoString2Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
dslChip(2),
|
|
dslFirmwareLoad(3),
|
|
fpgaLoad(4),
|
|
ethWanChip(5),
|
|
l2sChip(6),
|
|
bootLoaderVersion(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of InfoString 2
|
|
1 Empty InfoString is empty
|
|
2 DSL Chip InfoString is related to the DSL Chip
|
|
3 DSL Firmware Load InfoString is related to the DSL Firmware Load
|
|
4 FPGA Load InfoString is related to the FPGA Load
|
|
5 ETH WAN Chip InfoString is related to the Ethernet WAN Chip
|
|
5 L2S Chip InfoString is related to the Layer2 Switch Chip
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroFarInventoryInfoEntry 4 }
|
|
|
|
cmroFarInventoryInfoString3Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
dslChip(2),
|
|
dslFirmwareLoad(3),
|
|
fpgaLoad(4),
|
|
ethWanChip(5),
|
|
l2sChip(6),
|
|
bootLoaderVersion(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of InfoString 3
|
|
1 Empty InfoString is empty
|
|
2 DSL Chip InfoString is related to the DSL Chip
|
|
3 DSL Firmware Load InfoString is related to the DSL Firmware Load
|
|
4 FPGA Load InfoString is related to the FPGA Load
|
|
5 ETH WAN Chip InfoString is related to the Ethernet WAN Chip
|
|
5 L2S Chip InfoString is related to the Layer2 Switch Chip
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroFarInventoryInfoEntry 5 }
|
|
|
|
cmroFarInventoryInfoString4Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
dslChip(2),
|
|
dslFirmwareLoad(3),
|
|
fpgaLoad(4),
|
|
ethWanChip(5),
|
|
l2sChip(6),
|
|
bootLoaderVersion(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of InfoString 4
|
|
1 Empty InfoString is empty
|
|
2 DSL Chip InfoString is related to the DSL Chip
|
|
3 DSL Firmware Load InfoString is related to the DSL Firmware Load
|
|
4 FPGA Load InfoString is related to the FPGA Load
|
|
5 ETH WAN Chip InfoString is related to the Ethernet WAN Chip
|
|
5 L2S Chip InfoString is related to the Layer2 Switch Chip
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroFarInventoryInfoEntry 6 }
|
|
|
|
cmroFarInventoryInfoString5Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
dslChip(2),
|
|
dslFirmwareLoad(3),
|
|
fpgaLoad(4),
|
|
ethWanChip(5),
|
|
l2sChip(6),
|
|
bootLoaderVersion(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of InfoString 5
|
|
1 Empty InfoString is empty
|
|
2 DSL Chip InfoString is related to the DSL Chip
|
|
3 DSL Firmware Load InfoString is related to the DSL Firmware Load
|
|
4 FPGA Load InfoString is related to the FPGA Load
|
|
5 ETH WAN Chip InfoString is related to the Ethernet WAN Chip
|
|
5 L2S Chip InfoString is related to the Layer2 Switch Chip
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroFarInventoryInfoEntry 7 }
|
|
|
|
cmroFarInventoryInfoString1 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"InfoString 1"
|
|
::= { cmroFarInventoryInfoEntry 8 }
|
|
|
|
cmroFarInventoryInfoString2 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"InfoString 2"
|
|
::= { cmroFarInventoryInfoEntry 9 }
|
|
|
|
cmroFarInventoryInfoString3 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"InfoString 3"
|
|
::= { cmroFarInventoryInfoEntry 10 }
|
|
|
|
cmroFarInventoryInfoString4 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"InfoString 4"
|
|
::= { cmroFarInventoryInfoEntry 11 }
|
|
|
|
cmroFarInventoryInfoString5 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"InfoString 5"
|
|
::= { cmroFarInventoryInfoEntry 12 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RO SRU Inventory Info
|
|
--------------------------------------------------------------------------------
|
|
cmroSruInventoryInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmroSruInventoryInfoEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmroSruInventory 1 }
|
|
|
|
cmroSruInventoryInfoEntry OBJECT-TYPE
|
|
SYNTAX CmroSruInventoryInfoEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmroSruInventoryInfoPortIndex, cmroSruInventoryInfoLinkIndex, cmroSruInventoryInfoRegIndex }
|
|
::= { cmroSruInventoryInfoTable 1 }
|
|
|
|
CmroSruInventoryInfoEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmroSruInventoryInfoPortIndex INTEGER,
|
|
cmroSruInventoryInfoLinkIndex INTEGER,
|
|
cmroSruInventoryInfoRegIndex INTEGER,
|
|
cmroSruInventoryInfoString1Type INTEGER,
|
|
cmroSruInventoryInfoString2Type INTEGER,
|
|
cmroSruInventoryInfoString3Type INTEGER,
|
|
cmroSruInventoryInfoString4Type INTEGER,
|
|
cmroSruInventoryInfoString5Type INTEGER,
|
|
cmroSruInventoryInfoString1 DisplayString,
|
|
cmroSruInventoryInfoString2 DisplayString,
|
|
cmroSruInventoryInfoString3 DisplayString,
|
|
cmroSruInventoryInfoString4 DisplayString,
|
|
cmroSruInventoryInfoString5 DisplayString
|
|
}
|
|
|
|
cmroSruInventoryInfoPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroSruInventoryInfoEntry 1 }
|
|
|
|
cmroSruInventoryInfoLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmroSruInventoryInfoEntry 2 }
|
|
|
|
cmroSruInventoryInfoRegIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
reg11(3),
|
|
reg12(4),
|
|
reg21(5),
|
|
reg22(6),
|
|
reg31(7),
|
|
reg32(8),
|
|
reg41(9),
|
|
reg42(10),
|
|
reg51(11),
|
|
reg52(12),
|
|
reg61(13),
|
|
reg62(14),
|
|
reg71(15),
|
|
reg72(16),
|
|
reg81(17),
|
|
reg82(18),
|
|
reg13(19),
|
|
reg14(20),
|
|
reg23(21),
|
|
reg24(22),
|
|
reg33(23),
|
|
reg34(24),
|
|
reg43(25),
|
|
reg44(26),
|
|
reg53(27),
|
|
reg54(28),
|
|
reg63(29),
|
|
reg64(30),
|
|
reg73(31),
|
|
reg74(32),
|
|
reg83(33),
|
|
reg84(34)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the regenerator device and is
|
|
used as index for the other elements in the Table"
|
|
::= { cmroSruInventoryInfoEntry 3 }
|
|
|
|
cmroSruInventoryInfoString1Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
dslChip(2),
|
|
dslFirmwareLoad(3),
|
|
fpgaLoad(4),
|
|
ethWanChip(5),
|
|
l2sChip(6),
|
|
bootLoaderVersion(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of InfoString 1
|
|
1 Empty InfoString is empty
|
|
2 DSL Chip InfoString is related to the DSL Chip
|
|
3 DSL Firmware Load InfoString is related to the DSL Firmware Load
|
|
4 FPGA Load InfoString is related to the FPGA Load
|
|
5 ETH WAN Chip InfoString is related to the Ethernet WAN Chip
|
|
5 L2S Chip InfoString is related to the Layer2 Switch Chip
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroSruInventoryInfoEntry 4 }
|
|
|
|
cmroSruInventoryInfoString2Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
dslChip(2),
|
|
dslFirmwareLoad(3),
|
|
fpgaLoad(4),
|
|
ethWanChip(5),
|
|
l2sChip(6),
|
|
bootLoaderVersion(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of InfoString 2
|
|
1 Empty InfoString is empty
|
|
2 DSL Chip InfoString is related to the DSL Chip
|
|
3 DSL Firmware Load InfoString is related to the DSL Firmware Load
|
|
4 FPGA Load InfoString is related to the FPGA Load
|
|
5 ETH WAN Chip InfoString is related to the Ethernet WAN Chip
|
|
5 L2S Chip InfoString is related to the Layer2 Switch Chip
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroSruInventoryInfoEntry 5 }
|
|
|
|
cmroSruInventoryInfoString3Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
dslChip(2),
|
|
dslFirmwareLoad(3),
|
|
fpgaLoad(4),
|
|
ethWanChip(5),
|
|
l2sChip(6),
|
|
bootLoaderVersion(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of InfoString 3
|
|
1 Empty InfoString is empty
|
|
2 DSL Chip InfoString is related to the DSL Chip
|
|
3 DSL Firmware Load InfoString is related to the DSL Firmware Load
|
|
4 FPGA Load InfoString is related to the FPGA Load
|
|
5 ETH WAN Chip InfoString is related to the Ethernet WAN Chip
|
|
5 L2S Chip InfoString is related to the Layer2 Switch Chip
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroSruInventoryInfoEntry 6 }
|
|
|
|
cmroSruInventoryInfoString4Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
dslChip(2),
|
|
dslFirmwareLoad(3),
|
|
fpgaLoad(4),
|
|
ethWanChip(5),
|
|
l2sChip(6),
|
|
bootLoaderVersion(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of InfoString 4
|
|
1 Empty InfoString is empty
|
|
2 DSL Chip InfoString is related to the DSL Chip
|
|
3 DSL Firmware Load InfoString is related to the DSL Firmware Load
|
|
4 FPGA Load InfoString is related to the FPGA Load
|
|
5 ETH WAN Chip InfoString is related to the Ethernet WAN Chip
|
|
5 L2S Chip InfoString is related to the Layer2 Switch Chip
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroSruInventoryInfoEntry 7 }
|
|
|
|
cmroSruInventoryInfoString5Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
empty(1),
|
|
dslChip(2),
|
|
dslFirmwareLoad(3),
|
|
fpgaLoad(4),
|
|
ethWanChip(5),
|
|
l2sChip(6),
|
|
bootLoaderVersion(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of InfoString 5
|
|
1 Empty InfoString is empty
|
|
2 DSL Chip InfoString is related to the DSL Chip
|
|
3 DSL Firmware Load InfoString is related to the DSL Firmware Load
|
|
4 FPGA Load InfoString is related to the FPGA Load
|
|
5 ETH WAN Chip InfoString is related to the Ethernet WAN Chip
|
|
5 L2S Chip InfoString is related to the Layer2 Switch Chip
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmroSruInventoryInfoEntry 8 }
|
|
|
|
cmroSruInventoryInfoString1 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"InfoString 1"
|
|
::= { cmroSruInventoryInfoEntry 9 }
|
|
|
|
cmroSruInventoryInfoString2 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"InfoString 2"
|
|
::= { cmroSruInventoryInfoEntry 10 }
|
|
|
|
cmroSruInventoryInfoString3 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"InfoString 3"
|
|
::= { cmroSruInventoryInfoEntry 11 }
|
|
|
|
cmroSruInventoryInfoString4 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"InfoString 4"
|
|
::= { cmroSruInventoryInfoEntry 12 }
|
|
|
|
cmroSruInventoryInfoString5 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(25))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"InfoString 5"
|
|
::= { cmroSruInventoryInfoEntry 13 }
|
|
|
|
|
|
--==============================================================================
|
|
--==============================================================================
|
|
--
|
|
-- CM-RW
|
|
--
|
|
--==============================================================================
|
|
--==============================================================================
|
|
cmrw OBJECT IDENTIFIER ::= { linksVers3 2 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW sub OIDs
|
|
--------------------------------------------------------------------------------
|
|
cmrwLocal OBJECT IDENTIFIER ::= { cmrw 1 }
|
|
cmrwFar OBJECT IDENTIFIER ::= { cmrw 2 }
|
|
cmrwOmi OBJECT IDENTIFIER ::= { cmrw 3 }
|
|
cmrwSru OBJECT IDENTIFIER ::= { cmrw 4 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW local Token
|
|
--------------------------------------------------------------------------------
|
|
cmrwLocalTokenTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwLocalTokenEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwLocal 1 }
|
|
|
|
cmrwLocalTokenEntry OBJECT-TYPE
|
|
SYNTAX CmrwLocalTokenEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwLocalTokenPortIndex, cmrwLocalTokenLinkIndex }
|
|
::= { cmrwLocalTokenTable 1 }
|
|
|
|
CmrwLocalTokenEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwLocalTokenPortIndex INTEGER,
|
|
cmrwLocalTokenLinkIndex INTEGER,
|
|
cmrwLocalTokenResId INTEGER,
|
|
cmrwLocalTokenDipLt INTEGER,
|
|
cmrwLocalTokenDipNt INTEGER,
|
|
cmrwLocalTokenEoc INTEGER,
|
|
cmrwLocalTokenTicket INTEGER,
|
|
cmrwLocalTokenRelease INTEGER,
|
|
cmrwLocalTokenSessionId INTEGER
|
|
}
|
|
|
|
cmrwLocalTokenPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalTokenEntry 1 }
|
|
|
|
cmrwLocalTokenLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwLocalTokenEntry 2 }
|
|
|
|
cmrwLocalTokenResId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
available(1),
|
|
lineint(2),
|
|
lct(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates who is in posession of the reservation token for this
|
|
device.
|
|
1 Available The token is free
|
|
2 Lineint The token is given to the LineIntegrator
|
|
3 Lct The token is given to the Local Craft Terminal (LCT)
|
|
254 unknown value
|
|
255 unsupported variable for the addressed device"
|
|
::= { cmrwLocalTokenEntry 3 }
|
|
|
|
cmrwLocalTokenDipLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inactive(1),
|
|
active(2),
|
|
notLt(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the LT is configured by DIP switch. If it is,
|
|
then software configuration is not possible.
|
|
1 Inactive The LT is not configured by DIP switch
|
|
2 Active The LT is configured by DIP switch
|
|
3 NotLt The management system is connected to an NT locally
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { cmrwLocalTokenEntry 4}
|
|
|
|
cmrwLocalTokenDipNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inactive(1),
|
|
active(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the NT is configured by DIP switch. If it is,
|
|
then software configuration is not possible.
|
|
1 Inactive The NT is not configured by DIP switch
|
|
2 Active The NT is configured by DIP switch
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { cmrwLocalTokenEntry 5 }
|
|
|
|
cmrwLocalTokenEoc OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inactive(1),
|
|
active(2),
|
|
reg1(3),
|
|
reg2(4),
|
|
reg3(5),
|
|
reg4(6),
|
|
reg5(7),
|
|
reg6(8),
|
|
reg7(9),
|
|
reg8(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether there is an EOC connection between the LT
|
|
and the NT over the HDSL link.
|
|
1 Inactive EOC connection not available
|
|
2 Active EOC connection available
|
|
3 Reg1 The EOC is up until the first regenerator section
|
|
4 Reg2 The EOC is up until the second regenerator section
|
|
5 Reg3 The EOC is up until the third regenerator section
|
|
6 Reg4 The EOC is up until the fourth regenerator section
|
|
7 Reg5 The EOC is up until the fifth regenerator section
|
|
8 Reg6 The EOC is up until the sixth regenerator section
|
|
9 Reg7 The EOC is up until the seventh regenerator section
|
|
10 Reg8 The EOC is up until the eighth regenerator section
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { cmrwLocalTokenEntry 6 }
|
|
|
|
cmrwLocalTokenTicket OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
token1(1),
|
|
token2(2),
|
|
token3(3),
|
|
token4(4),
|
|
token5(5),
|
|
token6(6),
|
|
token7(7),
|
|
token8(8),
|
|
token9(9),
|
|
token10(10),
|
|
notGranted(11),
|
|
lost(12),
|
|
notRequested(13),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Is used to request or refresh the token
|
|
device.
|
|
1-10 Token1-10 The token was granted/refreshed, the index helps to detect whether it has expried since last reading from this variable
|
|
11 NotGranted The token was not granted
|
|
12 Lost The token could not be refreshed
|
|
13 NotRequested The token has not been requested
|
|
254 unknown value
|
|
255 unsupported variable for the addressed device"
|
|
::= { cmrwLocalTokenEntry 7 }
|
|
|
|
cmrwLocalTokenRelease OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
tokenReleased (1),
|
|
noNeedToRelease (2),
|
|
notReleased (3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Is used to release the token device.
|
|
1 TokenReleased Token has been successfully released.
|
|
2 NoNeedToRelease Token was not reserved, so need to release.
|
|
3 NotReleased Granted to LCT and coudn`t been released.
|
|
254 unknown value
|
|
255 unsupported variable for the addressed device"
|
|
::= { cmrwLocalTokenEntry 8 }
|
|
|
|
cmrwLocalTokenSessionId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates which SNMP management is in posession of the reservation token for this
|
|
device.
|
|
0 Invalid The session value is invalid
|
|
65535 Unsupported Unsupported variable for the addressed device"
|
|
::= { cmrwLocalTokenEntry 9 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW local Common
|
|
--------------------------------------------------------------------------------
|
|
cmrwLocalCommonTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwLocalCommonEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwLocal 2 }
|
|
|
|
cmrwLocalCommonEntry OBJECT-TYPE
|
|
SYNTAX CmrwLocalCommonEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwLocalCommonPortIndex, cmrwLocalCommonLinkIndex }
|
|
::= { cmrwLocalCommonTable 1 }
|
|
|
|
CmrwLocalCommonEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwLocalCommonPortIndex INTEGER,
|
|
cmrwLocalCommonLinkIndex INTEGER,
|
|
cmrwLocalCommonMode INTEGER,
|
|
cmrwLocalCommonFipo INTEGER,
|
|
cmrwLocalCommonRps INTEGER,
|
|
cmrwLocalCommonTimeslotsU INTEGER,
|
|
cmrwLocalCommonClockMode INTEGER,
|
|
cmrwLocalCommonMcsStructTdm INTEGER,
|
|
cmrwLocalCommonMcsChBandwidth INTEGER,
|
|
cmrwLocalCommonRpsCurrent INTEGER,
|
|
cmrwLocalCommonLineModulation INTEGER,
|
|
cmrwLocalCommonUseFixTimeslotsU INTEGER,
|
|
cmrwLocalCommonFixTimeslotsU INTEGER
|
|
}
|
|
|
|
cmrwLocalCommonPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalCommonEntry 1 }
|
|
|
|
cmrwLocalCommonLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwLocalCommonEntry 2 }
|
|
|
|
cmrwLocalCommonMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transparent(1),
|
|
structured(2),
|
|
pra(3),
|
|
data(4),
|
|
addDrop(5),
|
|
twoMData(6),
|
|
twoMAddDrop(7),
|
|
manual(8),
|
|
tiTwoM(9),
|
|
tiData(10),
|
|
oneTdmEth(11),
|
|
twoTdmEth(12),
|
|
fourTdmEth(13),
|
|
hTdmEth(14),
|
|
ethEth(15),
|
|
dualE1(16),
|
|
mapped(17),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the basic Mode the device is in. This has an influence on
|
|
the default values of most configuration variables (if not overwritten)
|
|
and on the limitations of options in the GUI of the element manager.
|
|
1 Transparent Transparent G.704 mode 2Mbit/s
|
|
2 Structured Structured 2Mbit/s mode (Framed)
|
|
3 Pra ISDN PRA mode
|
|
4 Data Standard Data-Data application
|
|
5 AddDrop Standard Add/Drop-Add/Drop application
|
|
6 TwoMData Standard 2Mbit/s-Data application
|
|
7 TwoMAddDrop Standard 2Mbit/s-Add/Drop application
|
|
8 Manual Manual mode (full freedom for configuration)
|
|
9 TiTwoM 2Mbit/s-Data application (TI style)
|
|
10 TiData Data-Data application
|
|
11 1TdmEth TDM-Ethernet application (TDM:DSL 1:1)
|
|
12 2TdmEth TDM-Ethernet application (TDM:DSL 1:2)
|
|
13 4TdmEth TDM-Ethernet application (TDM:DSL 1:4)
|
|
14 HalfTdmEth TDM-Ethernet application (TDM:DSL 2:1)
|
|
15 EthEth Ethernet application with 2 L2 Switches
|
|
16 DualE1 Dual E1 application
|
|
17 Mapped Mapped mode
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalCommonEntry 3 }
|
|
|
|
cmrwLocalCommonFipo OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(1),
|
|
fractional(2),
|
|
partial(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"FIPO Mode (Fractional Installation/Partial Operation).
|
|
This allows the use of only one wire-pair with a reduced
|
|
data rate of 960kbit/s (Fractional Installation) or the
|
|
operation with two wire-pairs with fall-back to 960kbit/s
|
|
if one wire-pair fails.
|
|
1 Normal Normal 2Mbit/s operation
|
|
2 Fractional Fractional Installation
|
|
3 Partial Partial Operation
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalCommonEntry 4 }
|
|
|
|
cmrwLocalCommonRps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inactive(1),
|
|
active(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to turn the Remote Power Supply on/off.
|
|
1 Inactive The RPS is turned off
|
|
2 Active The RPS is turned on
|
|
254 unknown value
|
|
255 unsupported
|
|
"
|
|
::= { cmrwLocalCommonEntry 5 }
|
|
|
|
cmrwLocalCommonTimeslotsU OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
bw64(1),
|
|
bw128(2),
|
|
bw192(3),
|
|
bw256(4),
|
|
bw320(5),
|
|
bw384(6),
|
|
bw448(7),
|
|
bw512(8),
|
|
bw576(9),
|
|
bw640(10),
|
|
bw704(11),
|
|
bw768(12),
|
|
bw832(13),
|
|
bw896(14),
|
|
bw960(15),
|
|
bw1024(16),
|
|
bw1088(17),
|
|
bw1152(18),
|
|
bw1216(19),
|
|
bw1280(20),
|
|
bw1344(21),
|
|
bw1408(22),
|
|
bw1472(23),
|
|
bw1536(24),
|
|
bw1600(25),
|
|
bw1664(26),
|
|
bw1728(27),
|
|
bw1792(28),
|
|
bw1856(29),
|
|
bw1920(30),
|
|
bw1984(31),
|
|
bw2048(32),
|
|
bw2112(33),
|
|
bw2176(34),
|
|
bw2240(35),
|
|
bw2304(36),
|
|
bw2368(37),
|
|
bw2432(38),
|
|
bw2496(39),
|
|
bw2560(40),
|
|
bw2624(41),
|
|
bw2688(42),
|
|
bw2752(43),
|
|
bw2816(44),
|
|
bw2880(45),
|
|
bw2944(46),
|
|
bw3008(47),
|
|
bw3072(48),
|
|
bw3136(49),
|
|
bw3200(50),
|
|
bw3264(51),
|
|
bw3328(52),
|
|
bw3392(53),
|
|
bw3456(54),
|
|
bw3520(55),
|
|
bw3584(56),
|
|
bw3648(57),
|
|
bw3712(58),
|
|
bw3776(59),
|
|
bw3840(60),
|
|
bw3904(61),
|
|
bw3968(62),
|
|
bw4032(63),
|
|
bw4096(64),
|
|
bw4160(65),
|
|
bw4224(66),
|
|
bw4288(67),
|
|
bw4352(68),
|
|
bw4416(69),
|
|
bw4480(70),
|
|
bw4544(71),
|
|
bw4608(72),
|
|
bw4672(73),
|
|
bw4736(74),
|
|
bw4800(75),
|
|
bw4864(76),
|
|
bw4928(77),
|
|
bw4992(78),
|
|
bw5056(79),
|
|
bw5120(80),
|
|
bw5184(81),
|
|
bw5248(82),
|
|
bw5312(83),
|
|
bw5376(84),
|
|
bw5440(85),
|
|
bw5504(86),
|
|
bw5568(87),
|
|
bw5632(88),
|
|
bw5696(89),
|
|
bw5760(90),
|
|
bw5824(91),
|
|
bw5888(92),
|
|
bw5952(93),
|
|
bw6016(94),
|
|
bw6080(95),
|
|
bw6144(96),
|
|
bw6208(97),
|
|
bw6272(98),
|
|
bw6336(99),
|
|
bw6400(100),
|
|
bw6464(101),
|
|
bw6528(102),
|
|
bw6592(103),
|
|
bw6656(104),
|
|
bw6720(105),
|
|
bw6784(106),
|
|
bw6848(107),
|
|
bw6912(108),
|
|
bw6976(109),
|
|
bw7040(110),
|
|
bw7104(111),
|
|
bw7168(112),
|
|
bw7232(113),
|
|
bw7296(114),
|
|
bw7360(115),
|
|
bw7424(116),
|
|
bw7488(117),
|
|
bw7552(118),
|
|
bw7616(119),
|
|
bw7680(120),
|
|
bw7744(121),
|
|
bw7808(122),
|
|
bw7872(123),
|
|
bw7936(124),
|
|
bw8000(125),
|
|
bw8064(126),
|
|
bw8128(127),
|
|
bw8192(128),
|
|
bw8256(129),
|
|
bw8320(130),
|
|
bw8384(131),
|
|
bw8448(132),
|
|
bw8512(133),
|
|
bw8576(134),
|
|
bw8640(135),
|
|
bw8704(136),
|
|
bw8768(137),
|
|
bw8832(138),
|
|
bw8896(139),
|
|
bw8960(140),
|
|
bw9024(141),
|
|
bw9088(142),
|
|
bw9152(143),
|
|
bw9216(144),
|
|
bw9280(145),
|
|
bw9344(146),
|
|
bw9408(147),
|
|
bw9472(148),
|
|
bw9536(149),
|
|
bw9600(150),
|
|
bw9664(151),
|
|
bw9728(152),
|
|
bw9792(153),
|
|
bw9856(154),
|
|
bw9920(155),
|
|
bw9984(156),
|
|
bw10048(157),
|
|
bw10112(158),
|
|
bw10176(159),
|
|
bw10240(160),
|
|
bw10304(161),
|
|
bw10368(162),
|
|
bw10432(163),
|
|
bw10496(164),
|
|
bw10560(165),
|
|
bw10624(166),
|
|
bw10688(167),
|
|
bw10752(168),
|
|
bw10816(169),
|
|
bw10880(170),
|
|
bw10944(171),
|
|
bw11008(172),
|
|
bw11072(173),
|
|
bw11136(174),
|
|
bw11200(175),
|
|
bw11264(176),
|
|
bw11328(177),
|
|
bw11392(178),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bandwidth allocated for transmission interface (U-Interface) as
|
|
a number of 64kbit/s time slots.
|
|
|
|
When reading the following values can be returned:
|
|
1 bw64 Bandwidth 64 kbit/s
|
|
2 bw128 Bandwidth 128 kbit/s
|
|
3 bw192 Bandwidth 192 kbit/s
|
|
4 bw256 Bandwidth 256 kbit/s
|
|
5 bw320 Bandwidth 320 kbit/s
|
|
6 bw384 Bandwidth 384 kbit/s
|
|
7 bw448 Bandwidth 448 kbit/s
|
|
8 bw512 Bandwidth 512 kbit/s
|
|
9 bw576 Bandwidth 576 kbit/s
|
|
10 bw640 Bandwidth 640 kbit/s
|
|
11 bw704 Bandwidth 704 kbit/s
|
|
12 bw768 Bandwidth 768 kbit/s
|
|
13 bw832 Bandwidth 832 kbit/s
|
|
14 bw896 Bandwidth 896 kbit/s
|
|
15 bw960 Bandwidth 960 kbit/s
|
|
16 bw1024 Bandwidth 1024 kbit/s
|
|
17 bw1088 Bandwidth 1088 kbit/s
|
|
18 bw1152 Bandwidth 1152 kbit/s
|
|
19 bw1216 Bandwidth 1216 kbit/s
|
|
20 bw1280 Bandwidth 1280 kbit/s
|
|
21 bw1344 Bandwidth 1344 kbit/s
|
|
22 bw1408 Bandwidth 1408 kbit/s
|
|
23 bw1472 Bandwidth 1472 kbit/s
|
|
24 bw1536 Bandwidth 1536 kbit/s
|
|
25 bw1600 Bandwidth 1600 kbit/s
|
|
26 bw1664 Bandwidth 1664 kbit/s
|
|
27 bw1728 Bandwidth 1728 kbit/s
|
|
28 bw1792 Bandwidth 1792 kbit/s
|
|
29 bw1856 Bandwidth 1856 kbit/s
|
|
30 bw1920 Bandwidth 1920 kbit/s
|
|
31 bw1984 Bandwidth 1984 kbit/s
|
|
32 bw2048 Bandwidth 2048 kbit/s
|
|
33 bw2112 Bandwidth 2112 kbit/s
|
|
34 bw2176 Bandwidth 2176 kbit/s
|
|
35 bw2240 Bandwidth 2240 kbit/s
|
|
36 bw2304 Bandwidth 2304 kbit/s
|
|
37 bw2368 Bandwidth 2368 kbit/s
|
|
38 bw2432 Bandwidth 2432 kbit/s
|
|
39 bw2496 Bandwidth 2496 kbit/s
|
|
40 bw2560 Bandwidth 2560 kbit/s
|
|
41 bw2624 Bandwidth 2624 kbit/s
|
|
42 bw2688 Bandwidth 2688 kbit/s
|
|
43 bw2752 Bandwidth 2752 kbit/s
|
|
44 bw2816 Bandwidth 2816 kbit/s
|
|
45 bw2880 Bandwidth 2880 kbit/s
|
|
46 bw2944 Bandwidth 2944 kbit/s
|
|
47 bw3008 Bandwidth 3008 kbit/s
|
|
48 bw3072 Bandwidth 3072 kbit/s
|
|
49 bw3136 Bandwidth 3136 kbit/s
|
|
50 bw3200 Bandwidth 3200 kbit/s
|
|
51 bw3264 Bandwidth 3264 kbit/s
|
|
52 bw3328 Bandwidth 3328 kbit/s
|
|
53 bw3392 Bandwidth 3392 kbit/s
|
|
54 bw3456 Bandwidth 3456 kbit/s
|
|
55 bw3520 Bandwidth 3520 kbit/s
|
|
56 bw3584 Bandwidth 3584 kbit/s
|
|
57 bw3648 Bandwidth 3648 kbit/s
|
|
58 bw3712 Bandwidth 3712 kbit/s
|
|
59 bw3776 Bandwidth 3776 kbit/s
|
|
60 bw3840 Bandwidth 3840 kbit/s
|
|
61 bw3904 Bandwidth 3904 kbit/s
|
|
62 bw3968 Bandwidth 3968 kbit/s
|
|
63 bw4032 Bandwidth 4032 kbit/s
|
|
64 bw4096 Bandwidth 4096 kbit/s
|
|
65 bw4160 Bandwidth 4160 kbit/s
|
|
66 bw4224 Bandwidth 4224 kbit/s
|
|
67 bw4288 Bandwidth 4288 kbit/s
|
|
68 bw4352 Bandwidth 4352 kbit/s
|
|
69 bw4416 Bandwidth 4416 kbit/s
|
|
70 bw4480 Bandwidth 4480 kbit/s
|
|
71 bw4544 Bandwidth 4544 kbit/s
|
|
72 bw4608 Bandwidth 4608 kbit/s
|
|
73 bw4672 Bandwidth 4672 kbit/s
|
|
74 bw4736 Bandwidth 4736 kbit/s
|
|
75 bw4800 Bandwidth 4800 kbit/s
|
|
76 bw4864 Bandwidth 4864 kbit/s
|
|
77 bw4928 Bandwidth 4928 kbit/s
|
|
78 bw4992 Bandwidth 4992 kbit/s
|
|
79 bw5056 Bandwidth 5056 kbit/s
|
|
80 bw5120 Bandwidth 5120 kbit/s
|
|
81 bw5184 Bandwidth 5184 kbit/s
|
|
82 bw5248 Bandwidth 5248 kbit/s
|
|
83 bw5312 Bandwidth 5312 kbit/s
|
|
84 bw5376 Bandwidth 5376 kbit/s
|
|
85 bw5440 Bandwidth 5440 kbit/s
|
|
86 bw5504 Bandwidth 5504 kbit/s
|
|
87 bw5568 Bandwidth 5568 kbit/s
|
|
88 bw5632 Bandwidth 5632 kbit/s
|
|
89 bw5696 Bandwidth 5696 kbit/s
|
|
90 bw5760 Bandwidth 5760 kbit/s
|
|
91 bw5824 Bandwidth 5824 kbit/s
|
|
92 bw5888 Bandwidth 5888 kbit/s
|
|
93 bw5952 Bandwidth 5952 kbit/s
|
|
94 bw6016 Bandwidth 6016 kbit/s
|
|
95 bw6080 Bandwidth 6080 kbit/s
|
|
96 bw6144 Bandwidth 6144 kbit/s
|
|
97 bw6208 Bandwidth 6208 kbit/s
|
|
98 bw6272 Bandwidth 6272 kbit/s
|
|
99 bw6336 Bandwidth 6336 kbit/s
|
|
100 bw6400 Bandwidth 6400 kbit/s
|
|
101 bw6464 Bandwidth 6464 kbit/s
|
|
102 bw6528 Bandwidth 6528 kbit/s
|
|
103 bw6592 Bandwidth 6592 kbit/s
|
|
104 bw6656 Bandwidth 6656 kbit/s
|
|
105 bw6720 Bandwidth 6720 kbit/s
|
|
106 bw6784 Bandwidth 6784 kbit/s
|
|
107 bw6848 Bandwidth 6848 kbit/s
|
|
108 bw6912 Bandwidth 6912 kbit/s
|
|
109 bw6976 Bandwidth 6976 kbit/s
|
|
110 bw7040 Bandwidth 7040 kbit/s
|
|
111 bw7104 Bandwidth 7104 kbit/s
|
|
112 bw7168 Bandwidth 7168 kbit/s
|
|
113 bw7232 Bandwidth 7232 kbit/s
|
|
114 bw7296 Bandwidth 7296 kbit/s
|
|
115 bw7360 Bandwidth 7360 kbit/s
|
|
116 bw7424 Bandwidth 7424 kbit/s
|
|
117 bw7488 Bandwidth 7488 kbit/s
|
|
118 bw7552 Bandwidth 7552 kbit/s
|
|
119 bw7616 Bandwidth 7616 kbit/s
|
|
120 bw7680 Bandwidth 7680 kbit/s
|
|
121 bw7744 Bandwidth 7744 kbit/s
|
|
122 bw7808 Bandwidth 7808 kbit/s
|
|
123 bw7872 Bandwidth 7872 kbit/s
|
|
124 bw7936 Bandwidth 7936 kbit/s
|
|
125 bw8000 Bandwidth 8000 kbit/s
|
|
126 bw8064 Bandwidth 8064 kbit/s
|
|
127 bw8128 Bandwidth 8128 kbit/s
|
|
128 bw8192 Bandwidth 8192 kbit/s
|
|
129 bw8256 Bandwidth 8256 kbit/s
|
|
130 bw8320 Bandwidth 8320 kbit/s
|
|
131 bw8384 Bandwidth 8384 kbit/s
|
|
132 bw8448 Bandwidth 8448 kbit/s
|
|
133 bw8512 Bandwidth 8512 kbit/s
|
|
134 bw8576 Bandwidth 8576 kbit/s
|
|
135 bw8640 Bandwidth 8640 kbit/s
|
|
136 bw8704 Bandwidth 8704 kbit/s
|
|
137 bw8768 Bandwidth 8768 kbit/s
|
|
138 bw8832 Bandwidth 8832 kbit/s
|
|
139 bw8896 Bandwidth 8896 kbit/s
|
|
140 bw8960 Bandwidth 8960 kbit/s
|
|
141 bw9024 Bandwidth 9024 kbit/s
|
|
142 bw9088 Bandwidth 9088 kbit/s
|
|
143 bw9152 Bandwidth 9152 kbit/s
|
|
144 bw9216 Bandwidth 9216 kbit/s
|
|
145 bw9280 Bandwidth 9280 kbit/s
|
|
146 bw9344 Bandwidth 9344 kbit/s
|
|
147 bw9408 Bandwidth 9408 kbit/s
|
|
148 bw9472 Bandwidth 9472 kbit/s
|
|
149 bw9536 Bandwidth 9536 kbit/s
|
|
150 bw9600 Bandwidth 9600 kbit/s
|
|
151 bw9664 Bandwidth 9664 kbit/s
|
|
152 bw9728 Bandwidth 9728 kbit/s
|
|
153 bw9792 Bandwidth 9792 kbit/s
|
|
154 bw9856 Bandwidth 9856 kbit/s
|
|
155 bw9920 Bandwidth 9920 kbit/s
|
|
156 bw9984 Bandwidth 9984 kbit/s
|
|
157 bw10048 Bandwidth 10048 kbit/s
|
|
158 bw10112 Bandwidth 10112 kbit/s
|
|
159 bw10176 Bandwidth 10176 kbit/s
|
|
160 bw10240 Bandwidth 10240 kbit/s
|
|
161 bw10304 Bandwidth 10304 kbit/s
|
|
162 bw10368 Bandwidth 10368 kbit/s
|
|
163 bw10432 Bandwidth 10432 kbit/s
|
|
164 bw10496 Bandwidth 10496 kbit/s
|
|
165 bw10560 Bandwidth 10560 kbit/s
|
|
166 bw10624 Bandwidth 10624 kbit/s
|
|
167 bw10688 Bandwidth 10688 kbit/s
|
|
168 bw10752 Bandwidth 10752 kbit/s
|
|
169 bw10816 Bandwidth 10816 kbit/s
|
|
170 bw10880 Bandwidth 10880 kbit/s
|
|
171 bw10944 Bandwidth 10944 kbit/s
|
|
172 bw11008 Bandwidth 11008 kbit/s
|
|
173 bw11072 Bandwidth 11072 kbit/s
|
|
174 bw11136 Bandwidth 11136 kbit/s
|
|
175 bw11200 Bandwidth 11200 kbit/s
|
|
176 bw11264 Bandwidth 11264 kbit/s
|
|
177 bw11328 Bandwidth 11328 kbit/s
|
|
178 bw11392 Bandwidth 11392 kbit/s
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalCommonEntry 6 }
|
|
|
|
cmrwLocalCommonClockMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
systemClock(1),
|
|
shdslClock(2),
|
|
synchronousClock(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Source for the clock out.
|
|
1 SystemClock The source is the system clock
|
|
2 ShdslClock The source is the SHDSL clock
|
|
3 SynchronousClock Clock Mode 3a (synchronous)
|
|
254 unknown value
|
|
255 unsupported
|
|
"
|
|
::= { cmrwLocalCommonEntry 7 }
|
|
|
|
cmrwLocalCommonMcsStructTdm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Determines whether MCS framing for structured TDM
|
|
networks is enabled or not.
|
|
1 Disabled Transparent TDM network
|
|
2 Enabled Structured TDM network (TS0)
|
|
254 unknown value
|
|
255 unsupported
|
|
"
|
|
::= { cmrwLocalCommonEntry 8 }
|
|
|
|
cmrwLocalCommonMcsChBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
bw64(1),
|
|
bw128(2),
|
|
bw192(3),
|
|
bw256(4),
|
|
bw320(5),
|
|
bw384(6),
|
|
bw448(7),
|
|
bw512(8),
|
|
bw576(9),
|
|
bw640(10),
|
|
bw704(11),
|
|
bw768(12),
|
|
bw832(13),
|
|
bw896(14),
|
|
bw960(15),
|
|
bw1024(16),
|
|
bw1088(17),
|
|
bw1152(18),
|
|
bw1216(19),
|
|
bw1280(20),
|
|
bw1344(21),
|
|
bw1408(22),
|
|
bw1472(23),
|
|
bw1536(24),
|
|
bw1600(25),
|
|
bw1664(26),
|
|
bw1728(27),
|
|
bw1792(28),
|
|
bw1856(29),
|
|
bw1920(30),
|
|
bw1984(31),
|
|
bw2048(32),
|
|
bw2112(33),
|
|
bw2176(34),
|
|
bw2240(35),
|
|
bw2304(36),
|
|
bw2368(37),
|
|
bw2432(38),
|
|
bw2496(39),
|
|
bw2560(40),
|
|
bw2624(41),
|
|
bw2688(42),
|
|
bw2752(43),
|
|
bw2816(44),
|
|
bw2880(45),
|
|
bw2944(46),
|
|
bw3008(47),
|
|
bw3072(48),
|
|
bw3136(49),
|
|
bw3200(50),
|
|
bw3264(51),
|
|
bw3328(52),
|
|
bw3392(53),
|
|
bw3456(54),
|
|
bw3520(55),
|
|
bw3584(56),
|
|
bw3648(57),
|
|
bw3712(58),
|
|
bw3776(59),
|
|
bw3840(60),
|
|
bw3904(61),
|
|
bw3968(62),
|
|
bw4032(63),
|
|
bw4096(64),
|
|
bw4160(65),
|
|
bw4224(66),
|
|
bw4288(67),
|
|
bw4352(68),
|
|
bw4416(69),
|
|
bw4480(70),
|
|
bw4544(71),
|
|
bw4608(72),
|
|
bw4672(73),
|
|
bw4736(74),
|
|
bw4800(75),
|
|
bw4864(76),
|
|
bw4928(77),
|
|
bw4992(78),
|
|
bw5056(79),
|
|
bw5120(80),
|
|
bw5184(81),
|
|
bw5248(82),
|
|
bw5312(83),
|
|
bw5376(84),
|
|
bw5440(85),
|
|
bw5504(86),
|
|
bw5568(87),
|
|
bw5632(88),
|
|
bw5696(89),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bandwidth allocated for all MCS channels as
|
|
a number of 64kbit/s time slots. Between 1 and 89.
|
|
|
|
When reading the following values can also be returned:
|
|
1 bw64 Bandwidth 64 kbit/s
|
|
2 bw128 Bandwidth 128 kbit/s
|
|
3 bw192 Bandwidth 192 kbit/s
|
|
4 bw256 Bandwidth 256 kbit/s
|
|
5 bw320 Bandwidth 320 kbit/s
|
|
6 bw384 Bandwidth 384 kbit/s
|
|
7 bw448 Bandwidth 448 kbit/s
|
|
8 bw512 Bandwidth 512 kbit/s
|
|
9 bw576 Bandwidth 576 kbit/s
|
|
10 bw640 Bandwidth 640 kbit/s
|
|
11 bw704 Bandwidth 704 kbit/s
|
|
12 bw768 Bandwidth 768 kbit/s
|
|
13 bw832 Bandwidth 832 kbit/s
|
|
14 bw896 Bandwidth 896 kbit/s
|
|
15 bw960 Bandwidth 960 kbit/s
|
|
16 bw1024 Bandwidth 1024 kbit/s
|
|
17 bw1088 Bandwidth 1088 kbit/s
|
|
18 bw1152 Bandwidth 1152 kbit/s
|
|
19 bw1216 Bandwidth 1216 kbit/s
|
|
20 bw1280 Bandwidth 1280 kbit/s
|
|
21 bw1344 Bandwidth 1344 kbit/s
|
|
22 bw1408 Bandwidth 1408 kbit/s
|
|
23 bw1472 Bandwidth 1472 kbit/s
|
|
24 bw1536 Bandwidth 1536 kbit/s
|
|
25 bw1600 Bandwidth 1600 kbit/s
|
|
26 bw1664 Bandwidth 1664 kbit/s
|
|
27 bw1728 Bandwidth 1728 kbit/s
|
|
28 bw1792 Bandwidth 1792 kbit/s
|
|
29 bw1856 Bandwidth 1856 kbit/s
|
|
30 bw1920 Bandwidth 1920 kbit/s
|
|
31 bw1984 Bandwidth 1984 kbit/s
|
|
32 bw2048 Bandwidth 2048 kbit/s
|
|
33 bw2112 Bandwidth 2112 kbit/s
|
|
34 bw2176 Bandwidth 2176 kbit/s
|
|
35 bw2240 Bandwidth 2240 kbit/s
|
|
36 bw2304 Bandwidth 2304 kbit/s
|
|
37 bw2368 Bandwidth 2368 kbit/s
|
|
38 bw2432 Bandwidth 2432 kbit/s
|
|
39 bw2496 Bandwidth 2496 kbit/s
|
|
40 bw2560 Bandwidth 2560 kbit/s
|
|
41 bw2624 Bandwidth 2624 kbit/s
|
|
42 bw2688 Bandwidth 2688 kbit/s
|
|
43 bw2752 Bandwidth 2752 kbit/s
|
|
44 bw2816 Bandwidth 2816 kbit/s
|
|
45 bw2880 Bandwidth 2880 kbit/s
|
|
46 bw2944 Bandwidth 2944 kbit/s
|
|
47 bw3008 Bandwidth 3008 kbit/s
|
|
48 bw3072 Bandwidth 3072 kbit/s
|
|
49 bw3136 Bandwidth 3136 kbit/s
|
|
50 bw3200 Bandwidth 3200 kbit/s
|
|
51 bw3264 Bandwidth 3264 kbit/s
|
|
52 bw3328 Bandwidth 3328 kbit/s
|
|
53 bw3392 Bandwidth 3392 kbit/s
|
|
54 bw3456 Bandwidth 3456 kbit/s
|
|
55 bw3520 Bandwidth 3520 kbit/s
|
|
56 bw3584 Bandwidth 3584 kbit/s
|
|
57 bw3648 Bandwidth 3648 kbit/s
|
|
58 bw3712 Bandwidth 3712 kbit/s
|
|
59 bw3776 Bandwidth 3776 kbit/s
|
|
60 bw3840 Bandwidth 3840 kbit/s
|
|
61 bw3904 Bandwidth 3904 kbit/s
|
|
62 bw3968 Bandwidth 3968 kbit/s
|
|
63 bw4032 Bandwidth 4032 kbit/s
|
|
64 bw4096 Bandwidth 4096 kbit/s
|
|
65 bw4160 Bandwidth 4160 kbit/s
|
|
66 bw4224 Bandwidth 4224 kbit/s
|
|
67 bw4288 Bandwidth 4288 kbit/s
|
|
68 bw4352 Bandwidth 4352 kbit/s
|
|
69 bw4416 Bandwidth 4416 kbit/s
|
|
70 bw4480 Bandwidth 4480 kbit/s
|
|
71 bw4544 Bandwidth 4544 kbit/s
|
|
72 bw4608 Bandwidth 4608 kbit/s
|
|
73 bw4672 Bandwidth 4672 kbit/s
|
|
74 bw4736 Bandwidth 4736 kbit/s
|
|
75 bw4800 Bandwidth 4800 kbit/s
|
|
76 bw4864 Bandwidth 4864 kbit/s
|
|
77 bw4928 Bandwidth 4928 kbit/s
|
|
78 bw4992 Bandwidth 4992 kbit/s
|
|
79 bw5056 Bandwidth 5056 kbit/s
|
|
80 bw5120 Bandwidth 5120 kbit/s
|
|
81 bw5184 Bandwidth 5184 kbit/s
|
|
82 bw5248 Bandwidth 5248 kbit/s
|
|
83 bw5312 Bandwidth 5312 kbit/s
|
|
84 bw5376 Bandwidth 5376 kbit/s
|
|
85 bw5440 Bandwidth 5440 kbit/s
|
|
86 bw5504 Bandwidth 5504 kbit/s
|
|
87 bw5568 Bandwidth 5568 kbit/s
|
|
88 bw5632 Bandwidth 5632 kbit/s
|
|
89 bw5696 Bandwidth 5696 kbit/s
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalCommonEntry 9 }
|
|
|
|
cmrwLocalCommonRpsCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
mA50(50),
|
|
mA60(60),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the Remote Power Supply current.
|
|
50 mA50 RPS current limied to 50 mA
|
|
60 mA60 RPS current limited to 60 mA
|
|
254 unknown value
|
|
255 unsupported
|
|
"
|
|
::= {cmrwLocalCommonEntry 10 }
|
|
|
|
cmrwLocalCommonLineModulation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
tcpam16(1),
|
|
tcpam32(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the Remote Power Supply current.
|
|
1 TC-PAM16 Line modulation TC-PAM16
|
|
2 TC-PAM32 Line modulation TC-PAM32
|
|
254 unknown value
|
|
255 unsupported
|
|
"
|
|
::= {cmrwLocalCommonEntry 11 }
|
|
|
|
cmrwLocalCommonUseFixTimeslotsU OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable or disable the fixed SHDSL Bitrate
|
|
configured in cmrwLocalCommonFixTimeslotsU.
|
|
1 Disabled SHDSL Bitrate is not fixed
|
|
2 Enabled SHDSL Bitrate is fixed
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalCommonEntry 12 }
|
|
|
|
cmrwLocalCommonFixTimeslotsU OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
bw64(1),
|
|
bw128(2),
|
|
bw192(3),
|
|
bw256(4),
|
|
bw320(5),
|
|
bw384(6),
|
|
bw448(7),
|
|
bw512(8),
|
|
bw576(9),
|
|
bw640(10),
|
|
bw704(11),
|
|
bw768(12),
|
|
bw832(13),
|
|
bw896(14),
|
|
bw960(15),
|
|
bw1024(16),
|
|
bw1088(17),
|
|
bw1152(18),
|
|
bw1216(19),
|
|
bw1280(20),
|
|
bw1344(21),
|
|
bw1408(22),
|
|
bw1472(23),
|
|
bw1536(24),
|
|
bw1600(25),
|
|
bw1664(26),
|
|
bw1728(27),
|
|
bw1792(28),
|
|
bw1856(29),
|
|
bw1920(30),
|
|
bw1984(31),
|
|
bw2048(32),
|
|
bw2112(33),
|
|
bw2176(34),
|
|
bw2240(35),
|
|
bw2304(36),
|
|
bw2368(37),
|
|
bw2432(38),
|
|
bw2496(39),
|
|
bw2560(40),
|
|
bw2624(41),
|
|
bw2688(42),
|
|
bw2752(43),
|
|
bw2816(44),
|
|
bw2880(45),
|
|
bw2944(46),
|
|
bw3008(47),
|
|
bw3072(48),
|
|
bw3136(49),
|
|
bw3200(50),
|
|
bw3264(51),
|
|
bw3328(52),
|
|
bw3392(53),
|
|
bw3456(54),
|
|
bw3520(55),
|
|
bw3584(56),
|
|
bw3648(57),
|
|
bw3712(58),
|
|
bw3776(59),
|
|
bw3840(60),
|
|
bw3904(61),
|
|
bw3968(62),
|
|
bw4032(63),
|
|
bw4096(64),
|
|
bw4160(65),
|
|
bw4224(66),
|
|
bw4288(67),
|
|
bw4352(68),
|
|
bw4416(69),
|
|
bw4480(70),
|
|
bw4544(71),
|
|
bw4608(72),
|
|
bw4672(73),
|
|
bw4736(74),
|
|
bw4800(75),
|
|
bw4864(76),
|
|
bw4928(77),
|
|
bw4992(78),
|
|
bw5056(79),
|
|
bw5120(80),
|
|
bw5184(81),
|
|
bw5248(82),
|
|
bw5312(83),
|
|
bw5376(84),
|
|
bw5440(85),
|
|
bw5504(86),
|
|
bw5568(87),
|
|
bw5632(88),
|
|
bw5696(89),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fixed SHDSL Bitrate per Wire Pair (can be enabled
|
|
by configuring cmrwLocalCommonUseFixTimeslotsU).
|
|
|
|
When reading the following values can be returned:
|
|
1 bw64 Bandwidth 64 kbit/s
|
|
2 bw128 Bandwidth 128 kbit/s
|
|
3 bw192 Bandwidth 192 kbit/s
|
|
4 bw256 Bandwidth 256 kbit/s
|
|
5 bw320 Bandwidth 320 kbit/s
|
|
6 bw384 Bandwidth 384 kbit/s
|
|
7 bw448 Bandwidth 448 kbit/s
|
|
8 bw512 Bandwidth 512 kbit/s
|
|
9 bw576 Bandwidth 576 kbit/s
|
|
10 bw640 Bandwidth 640 kbit/s
|
|
11 bw704 Bandwidth 704 kbit/s
|
|
12 bw768 Bandwidth 768 kbit/s
|
|
13 bw832 Bandwidth 832 kbit/s
|
|
14 bw896 Bandwidth 896 kbit/s
|
|
15 bw960 Bandwidth 960 kbit/s
|
|
16 bw1024 Bandwidth 1024 kbit/s
|
|
17 bw1088 Bandwidth 1088 kbit/s
|
|
18 bw1152 Bandwidth 1152 kbit/s
|
|
19 bw1216 Bandwidth 1216 kbit/s
|
|
20 bw1280 Bandwidth 1280 kbit/s
|
|
21 bw1344 Bandwidth 1344 kbit/s
|
|
22 bw1408 Bandwidth 1408 kbit/s
|
|
23 bw1472 Bandwidth 1472 kbit/s
|
|
24 bw1536 Bandwidth 1536 kbit/s
|
|
25 bw1600 Bandwidth 1600 kbit/s
|
|
26 bw1664 Bandwidth 1664 kbit/s
|
|
27 bw1728 Bandwidth 1728 kbit/s
|
|
28 bw1792 Bandwidth 1792 kbit/s
|
|
29 bw1856 Bandwidth 1856 kbit/s
|
|
30 bw1920 Bandwidth 1920 kbit/s
|
|
31 bw1984 Bandwidth 1984 kbit/s
|
|
32 bw2048 Bandwidth 2048 kbit/s
|
|
33 bw2112 Bandwidth 2112 kbit/s
|
|
34 bw2176 Bandwidth 2176 kbit/s
|
|
35 bw2240 Bandwidth 2240 kbit/s
|
|
36 bw2304 Bandwidth 2304 kbit/s
|
|
37 bw2368 Bandwidth 2368 kbit/s
|
|
38 bw2432 Bandwidth 2432 kbit/s
|
|
39 bw2496 Bandwidth 2496 kbit/s
|
|
40 bw2560 Bandwidth 2560 kbit/s
|
|
41 bw2624 Bandwidth 2624 kbit/s
|
|
42 bw2688 Bandwidth 2688 kbit/s
|
|
43 bw2752 Bandwidth 2752 kbit/s
|
|
44 bw2816 Bandwidth 2816 kbit/s
|
|
45 bw2880 Bandwidth 2880 kbit/s
|
|
46 bw2944 Bandwidth 2944 kbit/s
|
|
47 bw3008 Bandwidth 3008 kbit/s
|
|
48 bw3072 Bandwidth 3072 kbit/s
|
|
49 bw3136 Bandwidth 3136 kbit/s
|
|
50 bw3200 Bandwidth 3200 kbit/s
|
|
51 bw3264 Bandwidth 3264 kbit/s
|
|
52 bw3328 Bandwidth 3328 kbit/s
|
|
53 bw3392 Bandwidth 3392 kbit/s
|
|
54 bw3456 Bandwidth 3456 kbit/s
|
|
55 bw3520 Bandwidth 3520 kbit/s
|
|
56 bw3584 Bandwidth 3584 kbit/s
|
|
57 bw3648 Bandwidth 3648 kbit/s
|
|
58 bw3712 Bandwidth 3712 kbit/s
|
|
59 bw3776 Bandwidth 3776 kbit/s
|
|
60 bw3840 Bandwidth 3840 kbit/s
|
|
61 bw3904 Bandwidth 3904 kbit/s
|
|
62 bw3968 Bandwidth 3968 kbit/s
|
|
63 bw4032 Bandwidth 4032 kbit/s
|
|
64 bw4096 Bandwidth 4096 kbit/s
|
|
65 bw4160 Bandwidth 4160 kbit/s
|
|
66 bw4224 Bandwidth 4224 kbit/s
|
|
67 bw4288 Bandwidth 4288 kbit/s
|
|
68 bw4352 Bandwidth 4352 kbit/s
|
|
69 bw4416 Bandwidth 4416 kbit/s
|
|
70 bw4480 Bandwidth 4480 kbit/s
|
|
71 bw4544 Bandwidth 4544 kbit/s
|
|
72 bw4608 Bandwidth 4608 kbit/s
|
|
73 bw4672 Bandwidth 4672 kbit/s
|
|
74 bw4736 Bandwidth 4736 kbit/s
|
|
75 bw4800 Bandwidth 4800 kbit/s
|
|
76 bw4864 Bandwidth 4864 kbit/s
|
|
77 bw4928 Bandwidth 4928 kbit/s
|
|
78 bw4992 Bandwidth 4992 kbit/s
|
|
79 bw5056 Bandwidth 5056 kbit/s
|
|
80 bw5120 Bandwidth 5120 kbit/s
|
|
81 bw5184 Bandwidth 5184 kbit/s
|
|
82 bw5248 Bandwidth 5248 kbit/s
|
|
83 bw5312 Bandwidth 5312 kbit/s
|
|
84 bw5376 Bandwidth 5376 kbit/s
|
|
85 bw5440 Bandwidth 5440 kbit/s
|
|
86 bw5504 Bandwidth 5504 kbit/s
|
|
87 bw5568 Bandwidth 5568 kbit/s
|
|
88 bw5632 Bandwidth 5632 kbit/s
|
|
89 bw5696 Bandwidth 5696 kbit/s
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalCommonEntry 13 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW local Clock
|
|
--------------------------------------------------------------------------------
|
|
cmrwLocalClockTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwLocalClockEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwLocal 3 }
|
|
|
|
cmrwLocalClockEntry OBJECT-TYPE
|
|
SYNTAX CmrwLocalClockEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwLocalClockPortIndex, cmrwLocalClockLinkIndex }
|
|
::= { cmrwLocalClockTable 1 }
|
|
|
|
CmrwLocalClockEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwLocalClockPortIndex INTEGER,
|
|
cmrwLocalClockLinkIndex INTEGER,
|
|
cmrwLocalClockActive INTEGER,
|
|
cmrwLocalClockT3InAvailable INTEGER,
|
|
cmrwLocalClockTInterfaceAvailable INTEGER,
|
|
cmrwLocalClockUInterfaceAvailable INTEGER,
|
|
cmrwLocalClockInternalAvailable INTEGER,
|
|
cmrwLocalClockPriority OCTET STRING
|
|
}
|
|
|
|
cmrwLocalClockPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalClockEntry 1 }
|
|
|
|
cmrwLocalClockLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwLocalClockEntry 2 }
|
|
|
|
cmrwLocalClockActive OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
t3in(1),
|
|
tInterface(2),
|
|
uInterface(3),
|
|
internal(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates which clock source is currently being used.
|
|
1 T3In Uses Clock input T3In
|
|
2 TInterface Taking Clock from signal on T-Interface
|
|
3 UInterface Taking Clock from signal on U-Interface
|
|
4 Internal Using internal oscillator to generate Clock
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalClockEntry 3 }
|
|
|
|
cmrwLocalClockT3InAvailable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false(1),
|
|
true(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reports whether Clock Input T3In is available
|
|
1 False Clock Input T3In not available
|
|
2 True Clock Input T3In available
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalClockEntry 4 }
|
|
|
|
cmrwLocalClockTInterfaceAvailable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false(1),
|
|
true(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reports whether a clock signal can be derrived from the signal
|
|
on the T-Interface
|
|
1 False Clock signal available
|
|
2 True Clock signal available
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalClockEntry 5 }
|
|
|
|
cmrwLocalClockUInterfaceAvailable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false(1),
|
|
true(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reports whether a clock signal can be derrived from the signal
|
|
on the U-Interface
|
|
1 False Clock signal available
|
|
2 True Clock signal available
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalClockEntry 6 }
|
|
|
|
cmrwLocalClockInternalAvailable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false(1),
|
|
true(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reports whether the internal oscillator is available
|
|
1 False oscillator not available
|
|
2 True oscillator available
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalClockEntry 7 }
|
|
|
|
cmrwLocalClockPriority OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to read and set the clock priority for the different
|
|
clock sources. The variable is an array with length 4. The
|
|
indices correspond to the priorities (0=highest, 3=lowest).
|
|
The following values can be contained in each position,
|
|
indicating which clock source has the corresponding priority:
|
|
1 T3In Clock Input T3In
|
|
2 TInterface Clock derrived from Signal at T-Interface
|
|
3 UInterface Clock derrived from Signal at U-Interface
|
|
4 Internal Internal oscillator
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalClockEntry 8 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW local 2M
|
|
--------------------------------------------------------------------------------
|
|
cmrwLocal2MTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwLocal2MEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwLocal 4 }
|
|
|
|
cmrwLocal2MEntry OBJECT-TYPE
|
|
SYNTAX CmrwLocal2MEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwLocal2MPortIndex, cmrwLocal2MLinkIndex }
|
|
::= { cmrwLocal2MTable 1 }
|
|
|
|
CmrwLocal2MEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwLocal2MPortIndex INTEGER,
|
|
cmrwLocal2MLinkIndex INTEGER,
|
|
cmrwLocal2MFraming INTEGER,
|
|
cmrwLocal2MEnableT INTEGER,
|
|
cmrwLocal2MTimeslotsT INTEGER,
|
|
cmrwLocal2MIdlecodeT INTEGER,
|
|
cmrwLocal2MCrc4T INTEGER,
|
|
cmrwLocal2MCrc4U INTEGER,
|
|
cmrwLocal2MDetectAis INTEGER,
|
|
cmrwLocal2MInsertAis INTEGER,
|
|
cmrwLocal2MSaBits OCTET STRING,
|
|
cmrwLocal2MTs16Signalling INTEGER,
|
|
cmrwLocal2MIdlecodeU INTEGER,
|
|
cmrwLocal2MTs0Present INTEGER,
|
|
cmrwLocal2MCrc4V INTEGER,
|
|
cmrwLocal2MInterfaceImpedance INTEGER
|
|
}
|
|
|
|
cmrwLocal2MPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocal2MEntry 1 }
|
|
|
|
cmrwLocal2MLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwLocal2MEntry 2 }
|
|
|
|
cmrwLocal2MFraming OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transparent(1),
|
|
monitoring(2),
|
|
termination(3),
|
|
channelized(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Configures Frame Alignment
|
|
1 Transparent No frame or multi-frame synchronisation
|
|
2 Monitoring Frame and Multi-Frame synchronisation but no reinsertion of Frame
|
|
3 Termination Frame and Multi-Frame synchronisation and reinsertion
|
|
4 Channelized Frame and Multi-Frame synchronisation without transmission of timeslot 0
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocal2MEntry 3 }
|
|
|
|
cmrwLocal2MEnableT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable or disable the G.703 interface (T-Interface)
|
|
1 Disabled G.703 Interface is disabled
|
|
2 Enabled G.703 Interface is enabled
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocal2MEntry 4 }
|
|
|
|
cmrwLocal2MTimeslotsT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
bw64(1),
|
|
bw128(2),
|
|
bw192(3),
|
|
bw256(4),
|
|
bw320(5),
|
|
bw384(6),
|
|
bw448(7),
|
|
bw512(8),
|
|
bw576(9),
|
|
bw640(10),
|
|
bw704(11),
|
|
bw768(12),
|
|
bw832(13),
|
|
bw896(14),
|
|
bw960(15),
|
|
bw1024(16),
|
|
bw1088(17),
|
|
bw1152(18),
|
|
bw1216(19),
|
|
bw1280(20),
|
|
bw1344(21),
|
|
bw1408(22),
|
|
bw1472(23),
|
|
bw1536(24),
|
|
bw1600(25),
|
|
bw1664(26),
|
|
bw1728(27),
|
|
bw1792(28),
|
|
bw1856(29),
|
|
bw1920(30),
|
|
bw1984(31),
|
|
bw2048(32),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bandwidth allocated for G.703 Interface (T-Interface) as
|
|
a number of 64kbit/s time slots. Between 1 and 32.
|
|
|
|
When reading the following values can also be returned:
|
|
1 bw64 Bandwidth 64 kbit/s
|
|
2 bw128 Bandwidth 128 kbit/s
|
|
3 bw192 Bandwidth 192 kbit/s
|
|
4 bw256 Bandwidth 256 kbit/s
|
|
5 bw320 Bandwidth 320 kbit/s
|
|
6 bw384 Bandwidth 384 kbit/s
|
|
7 bw448 Bandwidth 448 kbit/s
|
|
8 bw512 Bandwidth 512 kbit/s
|
|
9 bw576 Bandwidth 576 kbit/s
|
|
10 bw640 Bandwidth 640 kbit/s
|
|
11 bw704 Bandwidth 704 kbit/s
|
|
12 bw768 Bandwidth 768 kbit/s
|
|
13 bw832 Bandwidth 832 kbit/s
|
|
14 bw896 Bandwidth 896 kbit/s
|
|
15 bw960 Bandwidth 960 kbit/s
|
|
16 bw1024 Bandwidth 1024 kbit/s
|
|
17 bw1088 Bandwidth 1088 kbit/s
|
|
18 bw1152 Bandwidth 1152 kbit/s
|
|
19 bw1216 Bandwidth 1216 kbit/s
|
|
20 bw1280 Bandwidth 1280 kbit/s
|
|
21 bw1344 Bandwidth 1344 kbit/s
|
|
22 bw1408 Bandwidth 1408 kbit/s
|
|
23 bw1472 Bandwidth 1472 kbit/s
|
|
24 bw1536 Bandwidth 1536 kbit/s
|
|
25 bw1600 Bandwidth 1600 kbit/s
|
|
26 bw1664 Bandwidth 1664 kbit/s
|
|
27 bw1728 Bandwidth 1728 kbit/s
|
|
28 bw1792 Bandwidth 1792 kbit/s
|
|
29 bw1856 Bandwidth 1856 kbit/s
|
|
30 bw1920 Bandwidth 1920 kbit/s
|
|
31 bw1984 Bandwidth 1984 kbit/s
|
|
32 bw2048 Bandwidth 2048 kbit/s
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocal2MEntry 5 }
|
|
|
|
cmrwLocal2MIdlecodeT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ais(1),
|
|
es(2),
|
|
pais(3),
|
|
none(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the Idle Code on the T-Interface.
|
|
1 AIS AIS
|
|
2 ES ES
|
|
3 PAIS PAIS
|
|
4 None No Idle Code
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocal2MEntry 6 }
|
|
|
|
cmrwLocal2MCrc4T OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(1),
|
|
on(2),
|
|
autoOff(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether CRC-4 evaluation at the T-Interface is done.
|
|
1 Off CRC-4 Data is not evaluated
|
|
2 On CRC-4 Data is evaluated, error if none present in signal
|
|
3 AutoOff CRC-4 Data is evaluated, if none is present, evaluation is disabled
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocal2MEntry 7 }
|
|
|
|
cmrwLocal2MCrc4U OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(1),
|
|
on(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether CRC-4 evaluation at the U-Interface is done.
|
|
1 Off CRC-4 Data is not evaluated
|
|
2 On CRC-4 Data is evaluated, error if none present in signal
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocal2MEntry 8 }
|
|
|
|
cmrwLocal2MDetectAis OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noDetect(1),
|
|
detect(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether AIS detection is enabled or not
|
|
1 NoDetect AIS is not detected
|
|
2 Detect AIS is detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocal2MEntry 9 }
|
|
|
|
cmrwLocal2MInsertAis OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noInsertion(1),
|
|
insertion(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether an AIS signal is regenerated or just passed through
|
|
1 NoInsertion Pass signal through
|
|
2 Insertion Regenerate signal
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocal2MEntry 10 }
|
|
|
|
cmrwLocal2MSaBits OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(6))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the Sa-bit configuration. The variable is an array with length 6.
|
|
The indicies address the Sa bits as follows:
|
|
[0] Sa4
|
|
[1] Sa5
|
|
[2] Sa6
|
|
[3] Sa7
|
|
[4] Sa8
|
|
[5] Sa6 Loop Detection
|
|
Positions 0,3 and 4 (Sa4, Sa7, Sa8) can contain the following values:
|
|
1 Transparent
|
|
2 Constant Ones
|
|
Position 1 (Sa5) can contain the following values:
|
|
1 Transparent
|
|
2 Constant Ones
|
|
3 Insert
|
|
Position 2 (Sa6) can contain the following values:
|
|
1 Transparent
|
|
2 Constant Ones
|
|
3 ETSI Norm
|
|
4 ANSI Norm
|
|
Position 5 (Sa6 Loop Detection) can contain the following values:
|
|
1 Loop Detection Off
|
|
2 Loop Detection On
|
|
|
|
All 6 positions can contain the values below:
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocal2MEntry 11 }
|
|
|
|
cmrwLocal2MTs16Signalling OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transparent(1),
|
|
new(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether time slot 16 is passed through transparently or
|
|
whether it is reinsertet.
|
|
1 Transparent Passing through TS16
|
|
2 New Reinserting TS16
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocal2MEntry 12 }
|
|
|
|
cmrwLocal2MIdlecodeU OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ais(1),
|
|
es(2),
|
|
pais(3),
|
|
none(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the Idle Code on the U-Interface.
|
|
1 AIS AIS
|
|
2 ES ES
|
|
3 PAIS PAIS
|
|
4 none no Idle Code
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocal2MEntry 13 }
|
|
|
|
cmrwLocal2MTs0Present OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(1),
|
|
yes(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether timeslot 0 (G.704 frame) is actually
|
|
transmitted by the U interface.
|
|
1 No Timeslot 0 is re-inserted by receiver
|
|
2 Yes Timeslot 0 is actually sent
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocal2MEntry 14 }
|
|
|
|
cmrwLocal2MCrc4V OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(1),
|
|
on(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether CRC-4 evaluation at the V-Interfaces is done.
|
|
1 Off CRC-4 Data is not evaluated
|
|
2 On CRC-4 Data is evaluated, error if none present in signal
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocal2MEntry 15 }
|
|
|
|
cmrwLocal2MInterfaceImpedance OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ohm75(75),
|
|
ohm120(120),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the impedance of the G.703 interface.
|
|
75 ohm75 The impedance of the G.703 interface is 75 Ohm.
|
|
120 ohm120 The impedance of the G.703 interface is 120 Ohm.
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocal2MEntry 16 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW local Data
|
|
--------------------------------------------------------------------------------
|
|
cmrwLocalDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwLocalDataEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwLocal 5 }
|
|
|
|
cmrwLocalDataEntry OBJECT-TYPE
|
|
SYNTAX CmrwLocalDataEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwLocalDataPortIndex, cmrwLocalDataLinkIndex }
|
|
::= { cmrwLocalDataTable 1 }
|
|
|
|
CmrwLocalDataEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwLocalDataPortIndex INTEGER,
|
|
cmrwLocalDataLinkIndex INTEGER,
|
|
cmrwLocalDataEnabledD INTEGER,
|
|
cmrwLocalDataTimeslotsD INTEGER,
|
|
cmrwLocalDataIdlecodeD INTEGER,
|
|
cmrwLocalDataFastSig INTEGER,
|
|
cmrwLocalDataLine106 INTEGER,
|
|
cmrwLocalDataLine107 INTEGER,
|
|
cmrwLocalDataLine109 INTEGER,
|
|
cmrwLocalDataLine140 INTEGER,
|
|
cmrwLocalDataLine141 INTEGER,
|
|
cmrwLocalDataUseTs16ForData INTEGER,
|
|
cmrwLocalDataEndToEndSignalling INTEGER,
|
|
cmrwLocalDataDteDceMode INTEGER,
|
|
cmrwLocalDataIfSelector INTEGER
|
|
}
|
|
|
|
cmrwLocalDataPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalDataEntry 1 }
|
|
|
|
cmrwLocalDataLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwLocalDataEntry 2 }
|
|
|
|
cmrwLocalDataEnabledD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether the Data Interface is enabled or not.
|
|
1 Disabled Data Interface is disabled
|
|
2 Enabled Data Interface is enabled
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalDataEntry 3 }
|
|
|
|
cmrwLocalDataTimeslotsD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
bw64(1),
|
|
bw128(2),
|
|
bw192(3),
|
|
bw256(4),
|
|
bw320(5),
|
|
bw384(6),
|
|
bw448(7),
|
|
bw512(8),
|
|
bw576(9),
|
|
bw640(10),
|
|
bw704(11),
|
|
bw768(12),
|
|
bw832(13),
|
|
bw896(14),
|
|
bw960(15),
|
|
bw1024(16),
|
|
bw1088(17),
|
|
bw1152(18),
|
|
bw1216(19),
|
|
bw1280(20),
|
|
bw1344(21),
|
|
bw1408(22),
|
|
bw1472(23),
|
|
bw1536(24),
|
|
bw1600(25),
|
|
bw1664(26),
|
|
bw1728(27),
|
|
bw1792(28),
|
|
bw1856(29),
|
|
bw1920(30),
|
|
bw1984(31),
|
|
bw2048(32),
|
|
bw2112(33),
|
|
bw2176(34),
|
|
bw2240(35),
|
|
bw2304(36),
|
|
bw2368(37),
|
|
bw2432(38),
|
|
bw2496(39),
|
|
bw2560(40),
|
|
bw2624(41),
|
|
bw2688(42),
|
|
bw2752(43),
|
|
bw2816(44),
|
|
bw2880(45),
|
|
bw2944(46),
|
|
bw3008(47),
|
|
bw3072(48),
|
|
bw3136(49),
|
|
bw3200(50),
|
|
bw3264(51),
|
|
bw3328(52),
|
|
bw3392(53),
|
|
bw3456(54),
|
|
bw3520(55),
|
|
bw3584(56),
|
|
bw3648(57),
|
|
bw3712(58),
|
|
bw3776(59),
|
|
bw3840(60),
|
|
bw3904(61),
|
|
bw3968(62),
|
|
bw4032(63),
|
|
bw4096(64),
|
|
bw4160(65),
|
|
bw4224(66),
|
|
bw4288(67),
|
|
bw4352(68),
|
|
bw4416(69),
|
|
bw4480(70),
|
|
bw4544(71),
|
|
bw4608(72),
|
|
bw4672(73),
|
|
bw4736(74),
|
|
bw4800(75),
|
|
bw4864(76),
|
|
bw4928(77),
|
|
bw4992(78),
|
|
bw5056(79),
|
|
bw5120(80),
|
|
bw5184(81),
|
|
bw5248(82),
|
|
bw5312(83),
|
|
bw5376(84),
|
|
bw5440(85),
|
|
bw5504(86),
|
|
bw5568(87),
|
|
bw5632(88),
|
|
bw5696(89),
|
|
bw5760(90),
|
|
bw5824(91),
|
|
bw5888(92),
|
|
bw5952(93),
|
|
bw6016(94),
|
|
bw6080(95),
|
|
bw6144(96),
|
|
bw6208(97),
|
|
bw6272(98),
|
|
bw6336(99),
|
|
bw6400(100),
|
|
bw6464(101),
|
|
bw6528(102),
|
|
bw6592(103),
|
|
bw6656(104),
|
|
bw6720(105),
|
|
bw6784(106),
|
|
bw6848(107),
|
|
bw6912(108),
|
|
bw6976(109),
|
|
bw7040(110),
|
|
bw7104(111),
|
|
bw7168(112),
|
|
bw7232(113),
|
|
bw7296(114),
|
|
bw7360(115),
|
|
bw7424(116),
|
|
bw7488(117),
|
|
bw7552(118),
|
|
bw7616(119),
|
|
bw7680(120),
|
|
bw7744(121),
|
|
bw7808(122),
|
|
bw7872(123),
|
|
bw7936(124),
|
|
bw8000(125),
|
|
bw8064(126),
|
|
bw8128(127),
|
|
bw8192(128),
|
|
bw8256(129),
|
|
bw8320(130),
|
|
bw8384(131),
|
|
bw8448(132),
|
|
bw8512(133),
|
|
bw8576(134),
|
|
bw8640(135),
|
|
bw8704(136),
|
|
bw8768(137),
|
|
bw8832(138),
|
|
bw8896(139),
|
|
bw8960(140),
|
|
bw9024(141),
|
|
bw9088(142),
|
|
bw9152(143),
|
|
bw9216(144),
|
|
bw9280(145),
|
|
bw9344(146),
|
|
bw9408(147),
|
|
bw9472(148),
|
|
bw9536(149),
|
|
bw9600(150),
|
|
bw9664(151),
|
|
bw9728(152),
|
|
bw9792(153),
|
|
bw9856(154),
|
|
bw9920(155),
|
|
bw9984(156),
|
|
bw10048(157),
|
|
bw10112(158),
|
|
bw10176(159),
|
|
bw10240(160),
|
|
bw10304(161),
|
|
bw10368(162),
|
|
bw10432(163),
|
|
bw10496(164),
|
|
bw10560(165),
|
|
bw10624(166),
|
|
bw10688(167),
|
|
bw10752(168),
|
|
bw10816(169),
|
|
bw10880(170),
|
|
bw10944(171),
|
|
bw11008(172),
|
|
bw11072(173),
|
|
bw11136(174),
|
|
bw11200(175),
|
|
bw11264(176),
|
|
bw11328(177),
|
|
bw11392(178),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bandwidth allocated for Data (D-Interface) as
|
|
a number of 64kbit/s time slots.
|
|
|
|
When reading the following values can also be returned:
|
|
1 bw64 Bandwidth 64 kbit/s
|
|
2 bw128 Bandwidth 128 kbit/s
|
|
3 bw192 Bandwidth 192 kbit/s
|
|
4 bw256 Bandwidth 256 kbit/s
|
|
5 bw320 Bandwidth 320 kbit/s
|
|
6 bw384 Bandwidth 384 kbit/s
|
|
7 bw448 Bandwidth 448 kbit/s
|
|
8 bw512 Bandwidth 512 kbit/s
|
|
9 bw576 Bandwidth 576 kbit/s
|
|
10 bw640 Bandwidth 640 kbit/s
|
|
11 bw704 Bandwidth 704 kbit/s
|
|
12 bw768 Bandwidth 768 kbit/s
|
|
13 bw832 Bandwidth 832 kbit/s
|
|
14 bw896 Bandwidth 896 kbit/s
|
|
15 bw960 Bandwidth 960 kbit/s
|
|
16 bw1024 Bandwidth 1024 kbit/s
|
|
17 bw1088 Bandwidth 1088 kbit/s
|
|
18 bw1152 Bandwidth 1152 kbit/s
|
|
19 bw1216 Bandwidth 1216 kbit/s
|
|
20 bw1280 Bandwidth 1280 kbit/s
|
|
21 bw1344 Bandwidth 1344 kbit/s
|
|
22 bw1408 Bandwidth 1408 kbit/s
|
|
23 bw1472 Bandwidth 1472 kbit/s
|
|
24 bw1536 Bandwidth 1536 kbit/s
|
|
25 bw1600 Bandwidth 1600 kbit/s
|
|
26 bw1664 Bandwidth 1664 kbit/s
|
|
27 bw1728 Bandwidth 1728 kbit/s
|
|
28 bw1792 Bandwidth 1792 kbit/s
|
|
29 bw1856 Bandwidth 1856 kbit/s
|
|
30 bw1920 Bandwidth 1920 kbit/s
|
|
31 bw1984 Bandwidth 1984 kbit/s
|
|
32 bw2048 Bandwidth 2048 kbit/s
|
|
33 bw2112 Bandwidth 2112 kbit/s
|
|
34 bw2176 Bandwidth 2176 kbit/s
|
|
35 bw2240 Bandwidth 2240 kbit/s
|
|
36 bw2304 Bandwidth 2304 kbit/s
|
|
37 bw2368 Bandwidth 2368 kbit/s
|
|
38 bw2432 Bandwidth 2432 kbit/s
|
|
39 bw2496 Bandwidth 2496 kbit/s
|
|
40 bw2560 Bandwidth 2560 kbit/s
|
|
41 bw2624 Bandwidth 2624 kbit/s
|
|
42 bw2688 Bandwidth 2688 kbit/s
|
|
43 bw2752 Bandwidth 2752 kbit/s
|
|
44 bw2816 Bandwidth 2816 kbit/s
|
|
45 bw2880 Bandwidth 2880 kbit/s
|
|
46 bw2944 Bandwidth 2944 kbit/s
|
|
47 bw3008 Bandwidth 3008 kbit/s
|
|
48 bw3072 Bandwidth 3072 kbit/s
|
|
49 bw3136 Bandwidth 3136 kbit/s
|
|
50 bw3200 Bandwidth 3200 kbit/s
|
|
51 bw3264 Bandwidth 3264 kbit/s
|
|
52 bw3328 Bandwidth 3328 kbit/s
|
|
53 bw3392 Bandwidth 3392 kbit/s
|
|
54 bw3456 Bandwidth 3456 kbit/s
|
|
55 bw3520 Bandwidth 3520 kbit/s
|
|
56 bw3584 Bandwidth 3584 kbit/s
|
|
57 bw3648 Bandwidth 3648 kbit/s
|
|
58 bw3712 Bandwidth 3712 kbit/s
|
|
59 bw3776 Bandwidth 3776 kbit/s
|
|
60 bw3840 Bandwidth 3840 kbit/s
|
|
61 bw3904 Bandwidth 3904 kbit/s
|
|
62 bw3968 Bandwidth 3968 kbit/s
|
|
63 bw4032 Bandwidth 4032 kbit/s
|
|
64 bw4096 Bandwidth 4096 kbit/s
|
|
65 bw4160 Bandwidth 4160 kbit/s
|
|
66 bw4224 Bandwidth 4224 kbit/s
|
|
67 bw4288 Bandwidth 4288 kbit/s
|
|
68 bw4352 Bandwidth 4352 kbit/s
|
|
69 bw4416 Bandwidth 4416 kbit/s
|
|
70 bw4480 Bandwidth 4480 kbit/s
|
|
71 bw4544 Bandwidth 4544 kbit/s
|
|
72 bw4608 Bandwidth 4608 kbit/s
|
|
73 bw4672 Bandwidth 4672 kbit/s
|
|
74 bw4736 Bandwidth 4736 kbit/s
|
|
75 bw4800 Bandwidth 4800 kbit/s
|
|
76 bw4864 Bandwidth 4864 kbit/s
|
|
77 bw4928 Bandwidth 4928 kbit/s
|
|
78 bw4992 Bandwidth 4992 kbit/s
|
|
79 bw5056 Bandwidth 5056 kbit/s
|
|
80 bw5120 Bandwidth 5120 kbit/s
|
|
81 bw5184 Bandwidth 5184 kbit/s
|
|
82 bw5248 Bandwidth 5248 kbit/s
|
|
83 bw5312 Bandwidth 5312 kbit/s
|
|
84 bw5376 Bandwidth 5376 kbit/s
|
|
85 bw5440 Bandwidth 5440 kbit/s
|
|
86 bw5504 Bandwidth 5504 kbit/s
|
|
87 bw5568 Bandwidth 5568 kbit/s
|
|
88 bw5632 Bandwidth 5632 kbit/s
|
|
89 bw5696 Bandwidth 5696 kbit/s
|
|
90 bw5760 Bandwidth 5760 kbit/s
|
|
91 bw5824 Bandwidth 5824 kbit/s
|
|
92 bw5888 Bandwidth 5888 kbit/s
|
|
93 bw5952 Bandwidth 5952 kbit/s
|
|
94 bw6016 Bandwidth 6016 kbit/s
|
|
95 bw6080 Bandwidth 6080 kbit/s
|
|
96 bw6144 Bandwidth 6144 kbit/s
|
|
97 bw6208 Bandwidth 6208 kbit/s
|
|
98 bw6272 Bandwidth 6272 kbit/s
|
|
99 bw6336 Bandwidth 6336 kbit/s
|
|
100 bw6400 Bandwidth 6400 kbit/s
|
|
101 bw6464 Bandwidth 6464 kbit/s
|
|
102 bw6528 Bandwidth 6528 kbit/s
|
|
103 bw6592 Bandwidth 6592 kbit/s
|
|
104 bw6656 Bandwidth 6656 kbit/s
|
|
105 bw6720 Bandwidth 6720 kbit/s
|
|
106 bw6784 Bandwidth 6784 kbit/s
|
|
107 bw6848 Bandwidth 6848 kbit/s
|
|
108 bw6912 Bandwidth 6912 kbit/s
|
|
109 bw6976 Bandwidth 6976 kbit/s
|
|
110 bw7040 Bandwidth 7040 kbit/s
|
|
111 bw7104 Bandwidth 7104 kbit/s
|
|
112 bw7168 Bandwidth 7168 kbit/s
|
|
113 bw7232 Bandwidth 7232 kbit/s
|
|
114 bw7296 Bandwidth 7296 kbit/s
|
|
115 bw7360 Bandwidth 7360 kbit/s
|
|
116 bw7424 Bandwidth 7424 kbit/s
|
|
117 bw7488 Bandwidth 7488 kbit/s
|
|
118 bw7552 Bandwidth 7552 kbit/s
|
|
119 bw7616 Bandwidth 7616 kbit/s
|
|
120 bw7680 Bandwidth 7680 kbit/s
|
|
121 bw7744 Bandwidth 7744 kbit/s
|
|
122 bw7808 Bandwidth 7808 kbit/s
|
|
123 bw7872 Bandwidth 7872 kbit/s
|
|
124 bw7936 Bandwidth 7936 kbit/s
|
|
125 bw8000 Bandwidth 8000 kbit/s
|
|
126 bw8064 Bandwidth 8064 kbit/s
|
|
127 bw8128 Bandwidth 8128 kbit/s
|
|
128 bw8192 Bandwidth 8192 kbit/s
|
|
129 bw8256 Bandwidth 8256 kbit/s
|
|
130 bw8320 Bandwidth 8320 kbit/s
|
|
131 bw8384 Bandwidth 8384 kbit/s
|
|
132 bw8448 Bandwidth 8448 kbit/s
|
|
133 bw8512 Bandwidth 8512 kbit/s
|
|
134 bw8576 Bandwidth 8576 kbit/s
|
|
135 bw8640 Bandwidth 8640 kbit/s
|
|
136 bw8704 Bandwidth 8704 kbit/s
|
|
137 bw8768 Bandwidth 8768 kbit/s
|
|
138 bw8832 Bandwidth 8832 kbit/s
|
|
139 bw8896 Bandwidth 8896 kbit/s
|
|
140 bw8960 Bandwidth 8960 kbit/s
|
|
141 bw9024 Bandwidth 9024 kbit/s
|
|
142 bw9088 Bandwidth 9088 kbit/s
|
|
143 bw9152 Bandwidth 9152 kbit/s
|
|
144 bw9216 Bandwidth 9216 kbit/s
|
|
145 bw9280 Bandwidth 9280 kbit/s
|
|
146 bw9344 Bandwidth 9344 kbit/s
|
|
147 bw9408 Bandwidth 9408 kbit/s
|
|
148 bw9472 Bandwidth 9472 kbit/s
|
|
149 bw9536 Bandwidth 9536 kbit/s
|
|
150 bw9600 Bandwidth 9600 kbit/s
|
|
151 bw9664 Bandwidth 9664 kbit/s
|
|
152 bw9728 Bandwidth 9728 kbit/s
|
|
153 bw9792 Bandwidth 9792 kbit/s
|
|
154 bw9856 Bandwidth 9856 kbit/s
|
|
155 bw9920 Bandwidth 9920 kbit/s
|
|
156 bw9984 Bandwidth 9984 kbit/s
|
|
157 bw10048 Bandwidth 10048 kbit/s
|
|
158 bw10112 Bandwidth 10112 kbit/s
|
|
159 bw10176 Bandwidth 10176 kbit/s
|
|
160 bw10240 Bandwidth 10240 kbit/s
|
|
161 bw10304 Bandwidth 10304 kbit/s
|
|
162 bw10368 Bandwidth 10368 kbit/s
|
|
163 bw10432 Bandwidth 10432 kbit/s
|
|
164 bw10496 Bandwidth 10496 kbit/s
|
|
165 bw10560 Bandwidth 10560 kbit/s
|
|
166 bw10624 Bandwidth 10624 kbit/s
|
|
167 bw10688 Bandwidth 10688 kbit/s
|
|
168 bw10752 Bandwidth 10752 kbit/s
|
|
169 bw10816 Bandwidth 10816 kbit/s
|
|
170 bw10880 Bandwidth 10880 kbit/s
|
|
171 bw10944 Bandwidth 10944 kbit/s
|
|
172 bw11008 Bandwidth 11008 kbit/s
|
|
173 bw11072 Bandwidth 11072 kbit/s
|
|
174 bw11136 Bandwidth 11136 kbit/s
|
|
175 bw11200 Bandwidth 11200 kbit/s
|
|
176 bw11264 Bandwidth 11264 kbit/s
|
|
177 bw11328 Bandwidth 11328 kbit/s
|
|
178 bw11392 Bandwidth 11392 kbit/s
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalDataEntry 4 }
|
|
|
|
cmrwLocalDataIdlecodeD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
null(1),
|
|
ais(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the Idle Code for the Data Interface.
|
|
1 Null Always send 0
|
|
2 Ais Always send 1
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalDataEntry 5 }
|
|
|
|
cmrwLocalDataFastSig OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(1),
|
|
on(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether Fast Signalling is used or not
|
|
1 Off Fast Signalling is not used
|
|
2 On Fast Signalling is used
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalDataEntry 6 }
|
|
|
|
cmrwLocalDataLine106 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
perm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether control line 106 is set automatically or
|
|
permanently turned on.
|
|
1 Auto Automatically set
|
|
2 Perm Permanently on
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalDataEntry 7 }
|
|
|
|
cmrwLocalDataLine107 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
perm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether control line 107 is set automatically or
|
|
permanently turned on.
|
|
1 Auto Automatically set
|
|
2 Perm Permanently on
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalDataEntry 8 }
|
|
|
|
cmrwLocalDataLine109 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
perm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether control line 109 is set automatically or
|
|
permanently turned on.
|
|
1 Auto Automatically set
|
|
2 Perm Permanently on
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalDataEntry 9 }
|
|
|
|
cmrwLocalDataLine140 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
perm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether control line 140 is set automatically or
|
|
permanently turned off.
|
|
1 Auto Automatically set
|
|
2 Perm Permanently off
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalDataEntry 10 }
|
|
|
|
cmrwLocalDataLine141 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
perm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether control line 141 is set automatically or
|
|
permanently turned off.
|
|
1 Auto Automatically set
|
|
2 Perm Permanently off
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalDataEntry 11 }
|
|
|
|
cmrwLocalDataUseTs16ForData OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(1),
|
|
yes(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether timeslot 16 can be used for data when
|
|
no signalling information is transmitted in it.
|
|
1 No Timeslot 16 is reserved even if no signalling is used
|
|
2 Yes Timeslot 16 is used for data if no signalling is used
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalDataEntry 12 }
|
|
|
|
cmrwLocalDataEndToEndSignalling OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
fastSig(2),
|
|
cas(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether End To End Signalling is enabled.
|
|
1 Disabled End To End Signalling is disabled
|
|
2 FastSig End To End Signalling is fast signalling
|
|
3 CAS End To End Signalling is CAS
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalDataEntry 13 }
|
|
|
|
cmrwLocalDataDteDceMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
dce(1),
|
|
dte(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the operation mode of the data interface.
|
|
1 DCE Data Interface operates in DCE (Data Circuit-Terminating Equipment) mode
|
|
2 DTE Data Interface operates in DTE (Data Terminal Equipment) mode
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalDataEntry 14 }
|
|
|
|
cmrwLocalDataIfSelector OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
mgblEthIf(1),
|
|
multiPurpDataIf(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Selects the active data Interface.
|
|
1 mgblEthIf Manageable Ethernet Interface is selected
|
|
2 multiPurpDataIf Multi Purpose Data Interface is selected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalDataEntry 15 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW local Action
|
|
--------------------------------------------------------------------------------
|
|
cmrwLocalActionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwLocalActionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwLocal 6 }
|
|
|
|
cmrwLocalActionEntry OBJECT-TYPE
|
|
SYNTAX CmrwLocalActionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwLocalActionPortIndex, cmrwLocalActionLinkIndex }
|
|
::= { cmrwLocalActionTable 1 }
|
|
|
|
CmrwLocalActionEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwLocalActionPortIndex INTEGER,
|
|
cmrwLocalActionLinkIndex INTEGER,
|
|
cmrwLocalActionReboot INTEGER
|
|
}
|
|
|
|
cmrwLocalActionPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalActionEntry 1 }
|
|
|
|
cmrwLocalActionLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwLocalActionEntry 2 }
|
|
|
|
cmrwLocalActionReboot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
passive(1),
|
|
active(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Command to reboot device. The parameter specifies whether
|
|
the firmware in the active or passive bank shall be started.
|
|
1 Passive Reboot using the passive firmware
|
|
2 Active Reboot using the active firmware
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
|
|
If the parameter 'passive' is specified but the passive
|
|
firmware bank contains no valid code, the device reboots
|
|
using the active firmware."
|
|
::= { cmrwLocalActionEntry 3 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW Local User Data
|
|
------------------------------------------------------------------------------
|
|
cmrwLocalUserDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwLocalUserDataEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwLocal 7 }
|
|
|
|
cmrwLocalUserDataEntry OBJECT-TYPE
|
|
SYNTAX CmrwLocalUserDataEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwLocalUserDataPortIndex, cmrwLocalUserDataLinkIndex, cmrwLocalUserDataItemIndex }
|
|
::= { cmrwLocalUserDataTable 1 }
|
|
|
|
CmrwLocalUserDataEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwLocalUserDataPortIndex INTEGER,
|
|
cmrwLocalUserDataLinkIndex INTEGER,
|
|
cmrwLocalUserDataItemIndex INTEGER,
|
|
cmrwLocalUserData DisplayString
|
|
}
|
|
|
|
cmrwLocalUserDataPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalUserDataEntry 1 }
|
|
|
|
cmrwLocalUserDataLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwLocalUserDataEntry 2 }
|
|
|
|
cmrwLocalUserDataItemIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the data field number of the user data
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwLocalUserDataEntry 3 }
|
|
|
|
cmrwLocalUserData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(100))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"User data that can be written to the device"
|
|
::= {cmrwLocalUserDataEntry 4 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW Power Back Off
|
|
--------------------------------------------------------------------------------
|
|
cmrwLocalPowerBackOffTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwLocalPowerBackOffEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwLocal 8 }
|
|
|
|
cmrwLocalPowerBackOffEntry OBJECT-TYPE
|
|
SYNTAX CmrwLocalPowerBackOffEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwLocalPowerBackOffPortIndex, cmrwLocalPowerBackOffLinkIndex }
|
|
::= { cmrwLocalPowerBackOffTable 1 }
|
|
|
|
CmrwLocalPowerBackOffEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwLocalPowerBackOffPortIndex INTEGER,
|
|
cmrwLocalPowerBackOffLinkIndex INTEGER,
|
|
cmrwLocalPowerBackOffLevel INTEGER,
|
|
cmrwLocalPowerBackOffAutoEnable INTEGER
|
|
}
|
|
|
|
cmrwLocalPowerBackOffPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalPowerBackOffEntry 1 }
|
|
|
|
cmrwLocalPowerBackOffLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwLocalPowerBackOffEntry 2 }
|
|
|
|
cmrwLocalPowerBackOffLevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1),
|
|
db1(2),
|
|
db2(3),
|
|
db3(4),
|
|
db4(5),
|
|
db5(6),
|
|
db6(7),
|
|
db7(8),
|
|
db8(9),
|
|
db9(10),
|
|
db10(11),
|
|
db11(12),
|
|
db12(13),
|
|
db13(14),
|
|
db14(15),
|
|
db15(16),
|
|
db16(17),
|
|
db17(18),
|
|
db18(19),
|
|
db19(20),
|
|
db20(21),
|
|
db21(22),
|
|
db22(23),
|
|
db23(24),
|
|
db24(25),
|
|
db25(26),
|
|
db26(27),
|
|
db27(28),
|
|
db28(29),
|
|
db29(30),
|
|
db30(31),
|
|
db31(32),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Returns the configured power back off level
|
|
1 Db0 The configured level is 0 dB.
|
|
2 Db1 The configured level is 1 dB.
|
|
3 Db2 The configured level is 2 dB.
|
|
4 Db3 The configured level is 3 dB.
|
|
5 Db4 The configured level is 4 dB.
|
|
6 Db5 The configured level is 5 dB.
|
|
7 Db6 The configured level is 6 dB.
|
|
8 Db7 The configured level is 7 dB.
|
|
9 Db8 The configured level is 8 dB.
|
|
10 Db9 The configured level is 9 dB.
|
|
11 Db10 The configured level is 10 dB.
|
|
12 Db11 The configured level is 11 dB.
|
|
13 Db12 The configured level is 12 dB.
|
|
14 Db13 The configured level is 13 dB.
|
|
15 Db14 The configured level is 14 dB.
|
|
16 Db15 The configured level is 15 dB.
|
|
17 Db16 The configured level is 16 dB.
|
|
18 Db17 The configured level is 17 dB.
|
|
19 Db18 The configured level is 18 dB.
|
|
20 Db19 The configured level is 19 dB.
|
|
21 Db20 The configured level is 20 dB.
|
|
22 Db21 The configured level is 21 dB.
|
|
23 Db22 The configured level is 22 dB.
|
|
24 Db23 The configured level is 23 dB.
|
|
25 Db24 The configured level is 24 dB.
|
|
26 Db25 The configured level is 25 dB.
|
|
27 Db26 The configured level is 26 dB.
|
|
28 Db27 The configured level is 27 dB.
|
|
29 Db28 The configured level is 28 dB.
|
|
30 Db29 The configured level is 29 dB.
|
|
31 Db30 The configured level is 30 dB.
|
|
32 Db31 The configured level is 31 dB.
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalPowerBackOffEntry 3 }
|
|
|
|
cmrwLocalPowerBackOffAutoEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false(1),
|
|
true(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reports whether auto power backoff is enabled
|
|
1 Off Auto power backoff is disabled
|
|
2 On Auto power backoff is enabled
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalPowerBackOffEntry 4 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW Section Power Back Off
|
|
--------------------------------------------------------------------------------
|
|
cmrwLocalSectionPboTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwLocalSectionPboEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwLocal 9 }
|
|
|
|
cmrwLocalSectionPboEntry OBJECT-TYPE
|
|
SYNTAX CmrwLocalSectionPboEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwLocalSectionPboPortIndex, cmrwLocalSectionPboLinkIndex, cmrwLocalSectionPboSectionIndex }
|
|
::= { cmrwLocalSectionPboTable 1 }
|
|
|
|
CmrwLocalSectionPboEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwLocalSectionPboPortIndex INTEGER,
|
|
cmrwLocalSectionPboLinkIndex INTEGER,
|
|
cmrwLocalSectionPboSectionIndex INTEGER,
|
|
cmrwLocalSectionPboLevelLt INTEGER,
|
|
cmrwLocalSectionPboLevelNt INTEGER,
|
|
cmrwLocalSectionPboAutoEnableLt INTEGER,
|
|
cmrwLocalSectionPboAutoEnableNt INTEGER
|
|
}
|
|
|
|
cmrwLocalSectionPboPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalSectionPboEntry 1 }
|
|
|
|
cmrwLocalSectionPboLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwLocalSectionPboEntry 2 }
|
|
|
|
cmrwLocalSectionPboSectionIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lt1(1),
|
|
lt2(2),
|
|
reg11(4),
|
|
reg12(5),
|
|
reg21(6),
|
|
reg22(7),
|
|
reg31(8),
|
|
reg32(9),
|
|
reg41(10),
|
|
reg42(11),
|
|
reg51(12),
|
|
reg52(13),
|
|
reg61(14),
|
|
reg62(15),
|
|
reg71(16),
|
|
reg72(17),
|
|
reg81(18),
|
|
reg82(19),
|
|
reg13(20),
|
|
reg14(21),
|
|
reg23(22),
|
|
reg24(23),
|
|
reg33(24),
|
|
reg34(25),
|
|
reg43(26),
|
|
reg44(27),
|
|
reg53(28),
|
|
reg54(29),
|
|
reg63(30),
|
|
reg64(31),
|
|
reg73(32),
|
|
reg74(33),
|
|
reg83(34),
|
|
reg84(35)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Selects the section for which the Power Back-off
|
|
values are set."
|
|
::= {cmrwLocalSectionPboEntry 3 }
|
|
|
|
cmrwLocalSectionPboLevelLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1),
|
|
db1(2),
|
|
db2(3),
|
|
db3(4),
|
|
db4(5),
|
|
db5(6),
|
|
db6(7),
|
|
db7(8),
|
|
db8(9),
|
|
db9(10),
|
|
db10(11),
|
|
db11(12),
|
|
db12(13),
|
|
db13(14),
|
|
db14(15),
|
|
db15(16),
|
|
db16(17),
|
|
db17(18),
|
|
db18(19),
|
|
db19(20),
|
|
db20(21),
|
|
db21(22),
|
|
db22(23),
|
|
db23(24),
|
|
db24(25),
|
|
db25(26),
|
|
db26(27),
|
|
db27(28),
|
|
db28(29),
|
|
db29(30),
|
|
db30(31),
|
|
db31(32),
|
|
dbMin1(130),
|
|
dbMin2(131),
|
|
dbMin3(132),
|
|
dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Returns the configured power back off level
|
|
1 Db0 The configured level is 0 dB.
|
|
2 Db1 The configured level is 1 dB.
|
|
3 Db2 The configured level is 2 dB.
|
|
4 Db3 The configured level is 3 dB.
|
|
5 Db4 The configured level is 4 dB.
|
|
6 Db5 The configured level is 5 dB.
|
|
7 Db6 The configured level is 6 dB.
|
|
8 Db7 The configured level is 7 dB.
|
|
9 Db8 The configured level is 8 dB.
|
|
10 Db9 The configured level is 9 dB.
|
|
11 Db10 The configured level is 10 dB.
|
|
12 Db11 The configured level is 11 dB.
|
|
13 Db12 The configured level is 12 dB.
|
|
14 Db13 The configured level is 13 dB.
|
|
15 Db14 The configured level is 14 dB.
|
|
16 Db15 The configured level is 15 dB.
|
|
17 Db16 The configured level is 16 dB.
|
|
18 Db17 The configured level is 17 dB.
|
|
19 Db18 The configured level is 18 dB.
|
|
20 Db19 The configured level is 19 dB.
|
|
21 Db20 The configured level is 20 dB.
|
|
22 Db21 The configured level is 21 dB.
|
|
23 Db22 The configured level is 22 dB.
|
|
24 Db23 The configured level is 23 dB.
|
|
25 Db24 The configured level is 24 dB.
|
|
26 Db25 The configured level is 25 dB.
|
|
27 Db26 The configured level is 26 dB.
|
|
28 Db27 The configured level is 27 dB.
|
|
29 Db28 The configured level is 28 dB.
|
|
30 Db29 The configured level is 29 dB.
|
|
31 Db30 The configured level is 30 dB.
|
|
32 Db31 The configured level is 31 dB.
|
|
130 DbMin1 The configured level is -1 dB (Power Boost).
|
|
131 DbMin2 The configured level is -2 dB (Power Boost).
|
|
132 DbMin3 The configured level is -3 dB (Power Boost).
|
|
133 DbMin4 The configured level is -4 dB (Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalSectionPboEntry 4 }
|
|
|
|
cmrwLocalSectionPboLevelNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1),
|
|
db1(2),
|
|
db2(3),
|
|
db3(4),
|
|
db4(5),
|
|
db5(6),
|
|
db6(7),
|
|
db7(8),
|
|
db8(9),
|
|
db9(10),
|
|
db10(11),
|
|
db11(12),
|
|
db12(13),
|
|
db13(14),
|
|
db14(15),
|
|
db15(16),
|
|
db16(17),
|
|
db17(18),
|
|
db18(19),
|
|
db19(20),
|
|
db20(21),
|
|
db21(22),
|
|
db22(23),
|
|
db23(24),
|
|
db24(25),
|
|
db25(26),
|
|
db26(27),
|
|
db27(28),
|
|
db28(29),
|
|
db29(30),
|
|
db30(31),
|
|
db31(32),
|
|
dbMin1(130),
|
|
dbMin2(131),
|
|
dbMin3(132),
|
|
dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Returns the configured power back off level
|
|
1 Db0 The configured level is 0 dB.
|
|
2 Db1 The configured level is 1 dB.
|
|
3 Db2 The configured level is 2 dB.
|
|
4 Db3 The configured level is 3 dB.
|
|
5 Db4 The configured level is 4 dB.
|
|
6 Db5 The configured level is 5 dB.
|
|
7 Db6 The configured level is 6 dB.
|
|
8 Db7 The configured level is 7 dB.
|
|
9 Db8 The configured level is 8 dB.
|
|
10 Db9 The configured level is 9 dB.
|
|
11 Db10 The configured level is 10 dB.
|
|
12 Db11 The configured level is 11 dB.
|
|
13 Db12 The configured level is 12 dB.
|
|
14 Db13 The configured level is 13 dB.
|
|
15 Db14 The configured level is 14 dB.
|
|
16 Db15 The configured level is 15 dB.
|
|
17 Db16 The configured level is 16 dB.
|
|
18 Db17 The configured level is 17 dB.
|
|
19 Db18 The configured level is 18 dB.
|
|
20 Db19 The configured level is 19 dB.
|
|
21 Db20 The configured level is 20 dB.
|
|
22 Db21 The configured level is 21 dB.
|
|
23 Db22 The configured level is 22 dB.
|
|
24 Db23 The configured level is 23 dB.
|
|
25 Db24 The configured level is 24 dB.
|
|
26 Db25 The configured level is 25 dB.
|
|
27 Db26 The configured level is 26 dB.
|
|
28 Db27 The configured level is 27 dB.
|
|
29 Db28 The configured level is 28 dB.
|
|
30 Db29 The configured level is 29 dB.
|
|
31 Db30 The configured level is 30 dB.
|
|
32 Db31 The configured level is 31 dB.
|
|
130 DbMin1 The configured level is -1 dB (Power Boost).
|
|
131 DbMin2 The configured level is -2 dB (Power Boost).
|
|
132 DbMin3 The configured level is -3 dB (Power Boost).
|
|
133 DbMin4 The configured level is -4 dB (Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalSectionPboEntry 5 }
|
|
|
|
cmrwLocalSectionPboAutoEnableLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false(1),
|
|
true(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reports whether auto power backoff is enabled
|
|
1 Off Auto power backoff is disabled
|
|
2 On Auto power backoff is enabled
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalSectionPboEntry 6 }
|
|
|
|
cmrwLocalSectionPboAutoEnableNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false(1),
|
|
true(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reports whether auto power backoff is enabled
|
|
1 Off Auto power backoff is disabled
|
|
2 On Auto power backoff is enabled
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalSectionPboEntry 7 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW Setup
|
|
--------------------------------------------------------------------------------
|
|
cmrwLocalSetupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwLocalSetupEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwLocal 10 }
|
|
|
|
cmrwLocalSetupEntry OBJECT-TYPE
|
|
SYNTAX CmrwLocalSetupEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwLocalSetupPortIndex, cmrwLocalSetupLinkIndex }
|
|
::= { cmrwLocalSetupTable 1 }
|
|
|
|
CmrwLocalSetupEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwLocalSetupPortIndex INTEGER,
|
|
cmrwLocalSetupLinkIndex INTEGER,
|
|
cmrwLocalSetupNumWirePairs INTEGER,
|
|
cmrwLocalSetupLineActivation INTEGER,
|
|
cmrwLocalSetupVirtSysActivation INTEGER,
|
|
cmrwLocalSetupCardActivation OCTET STRING,
|
|
cmrwLocalSetupCardActState OCTET STRING,
|
|
cmrwLocalSetupIfAssignment OCTET STRING
|
|
}
|
|
|
|
cmrwLocalSetupPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalSetupEntry 1 }
|
|
|
|
cmrwLocalSetupLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalSetupEntry 2 }
|
|
|
|
cmrwLocalSetupNumWirePairs OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
oneWirePairs(1),
|
|
twoWirePairs(2),
|
|
fourWirePairs(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of wire pairs of the line
|
|
1 OneWirePairs Line with one wire pair
|
|
2 TwoWirePairs Line with two wire pairs
|
|
3 FourWirePairs Line with four wire pairs
|
|
254 unknown
|
|
255 unsupported
|
|
Side effect: If you do change this variable all other lines on the card
|
|
will be affected as well"
|
|
::= { cmrwLocalSetupEntry 3 }
|
|
|
|
cmrwLocalSetupLineActivation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
activated(1),
|
|
deactivated(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a line is activated or deactiated.
|
|
1 activated The line is activated
|
|
2 deactivated The line is deactivated
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwLocalSetupEntry 4 }
|
|
|
|
cmrwLocalSetupVirtSysActivation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the virtual system is enabled or disabled.
|
|
1 disabled The virtual system is disabled
|
|
2 enabled The virtual system is enabled
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwLocalSetupEntry 5 }
|
|
|
|
cmrwLocalSetupCardActivation OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(8))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the system activation for the systems A to H on the card.
|
|
Each byte consists of the following information for one system:
|
|
1 Deactivated The system is inactive
|
|
2 Activated The system is active
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalSetupEntry 6 }
|
|
|
|
cmrwLocalSetupCardActState OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(8))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the system activation state for the systems A to H on the card .
|
|
Each byte consists of the following information for one system:
|
|
1 Current The system belongs to the currently managed line
|
|
2 Present The system does not belong to the currently managed line
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalSetupEntry 7 }
|
|
|
|
cmrwLocalSetupIfAssignment OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the assignment of the (moveable) interfaces 1..4
|
|
to the systems A..D on the card .
|
|
Each byte consists of the following information for one interface:
|
|
1 systemA The interface is assigned to System A
|
|
2 systemB The interface is assigned to System B
|
|
3 systemC The interface is assigned to System C
|
|
4 systemD The interface is assigned to System D
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalSetupEntry 8 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW L2SwitchPort
|
|
--------------------------------------------------------------------------------
|
|
cmrwLocalL2SwitchPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwLocalL2SwitchPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwLocal 11 }
|
|
|
|
cmrwLocalL2SwitchPortEntry OBJECT-TYPE
|
|
SYNTAX CmrwLocalL2SwitchPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwLocalL2SwitchPortPortIndex, cmrwLocalL2SwitchPortLinkIndex, cmrwLocalL2SwitchPortLanPortIndex }
|
|
::= { cmrwLocalL2SwitchPortTable 1 }
|
|
|
|
CmrwLocalL2SwitchPortEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwLocalL2SwitchPortPortIndex INTEGER,
|
|
cmrwLocalL2SwitchPortLinkIndex INTEGER,
|
|
cmrwLocalL2SwitchPortLanPortIndex INTEGER,
|
|
cmrwLocalL2SwitchPortEnabled INTEGER,
|
|
cmrwLocalL2SwitchPortPhyCfg INTEGER,
|
|
cmrwLocalL2SwitchPortPhyAdvModes INTEGER,
|
|
cmrwLocalL2SwitchPortPhyCfgReadout INTEGER,
|
|
cmrwLocalL2SwitchPortAutoXover INTEGER,
|
|
cmrwLocalL2SwitchPortFlowCtrl INTEGER,
|
|
cmrwLocalL2SwitchPortRateLimit INTEGER,
|
|
cmrwLocalL2SwitchPortRateLimitCfg INTEGER
|
|
}
|
|
|
|
cmrwLocalL2SwitchPortPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalL2SwitchPortEntry 1 }
|
|
|
|
cmrwLocalL2SwitchPortLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalL2SwitchPortEntry 2 }
|
|
|
|
cmrwLocalL2SwitchPortLanPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the L2Switch port (LAN side)
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalL2SwitchPortEntry 3 }
|
|
|
|
cmrwLocalL2SwitchPortEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether the L2Switch port is enabled or not.
|
|
1 Disabled L2Switch port is disabled
|
|
2 Enabled L2Switch port is enabled
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwLocalL2SwitchPortEntry 4 }
|
|
|
|
cmrwLocalL2SwitchPortPhyCfg OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
full10(1),
|
|
full100(2),
|
|
half10(3),
|
|
half100(4),
|
|
auto(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the ethernet phy config or allows auto negotiation.
|
|
1 Full Duplex 10Mbps
|
|
2 Full Duplex 100Mbps
|
|
3 Half Duplex 10Mbps
|
|
4 Half Duplex 100Mbps
|
|
5 Auto Negotiation
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwLocalL2SwitchPortEntry 5 }
|
|
|
|
cmrwLocalL2SwitchPortPhyAdvModes OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the phy modes to be offered during auto
|
|
negotiation ('advertized modes').
|
|
Bit 0 1 Full Duplex 10Mbps
|
|
Bit 1 2 Full Duplex 100Mbps
|
|
Bit 2 4 Half Duplex 10Mbps
|
|
Bit 3 8 Half Duplex 100Mbps
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)"
|
|
::= { cmrwLocalL2SwitchPortEntry 6 }
|
|
|
|
cmrwLocalL2SwitchPortPhyCfgReadout OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
full10(1),
|
|
full100(2),
|
|
half10(3),
|
|
half100(4),
|
|
auto(5),
|
|
linkdown(6),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current ethernet phy config.
|
|
1 Full Duplex 10Mbps
|
|
2 Full Duplex 100Mbps
|
|
3 Half Duplex 10Mbps
|
|
4 Half Duplex 100Mbps
|
|
5 Auto Negotiation
|
|
6 Linkdown
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwLocalL2SwitchPortEntry 7 }
|
|
|
|
cmrwLocalL2SwitchPortAutoXover OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Determines whether ethernet crossover (MDI/MDI-X)
|
|
should automatically be detected and compensated
|
|
for.
|
|
1 Disabled MDI
|
|
2 Enabled Auto MDI/MDI-X
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwLocalL2SwitchPortEntry 8 }
|
|
|
|
cmrwLocalL2SwitchPortFlowCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Determines whether flow control should be performed
|
|
on a specific port.
|
|
1 Disabled Flow control disabled
|
|
2 Enabled Flow control enabled
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwLocalL2SwitchPortEntry 9 }
|
|
|
|
cmrwLocalL2SwitchPortRateLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Determines the maximum bit rate on a specific port
|
|
in 32kbps increments. This setting can be
|
|
overriden by the Rate Limit Cfg setting.
|
|
1 Rate Limit 32kbps
|
|
2 Rate Limit 64kbps
|
|
...
|
|
288 Rate Limit 9216kbps (equals 4*2304 kbps)
|
|
...
|
|
3125 Rate Limit 100Mbps
|
|
65534 unknown
|
|
65535 unsupported"
|
|
::= { cmrwLocalL2SwitchPortEntry 10 }
|
|
|
|
cmrwLocalL2SwitchPortRateLimitCfg OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unlimited(1),
|
|
userN32k(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Determines the behavior of the port rate limiter.
|
|
on a specific port
|
|
1 Unlimited No rate limit enforced
|
|
2 User-Def. n*32k User-defined value in 32k increments
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwLocalL2SwitchPortEntry 11 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW Local Multi Interfaces
|
|
--------------------------------------------------------------------------------
|
|
cmrwLocalMultiIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwLocalMultiIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwLocal 12 }
|
|
|
|
cmrwLocalMultiIfEntry OBJECT-TYPE
|
|
SYNTAX CmrwLocalMultiIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwLocalMultiIfPortIndex, cmrwLocalMultiIfLinkIndex, cmrwLocalMultiIfInstanceIndex }
|
|
::= { cmrwLocalMultiIfTable 1 }
|
|
|
|
CmrwLocalMultiIfEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwLocalMultiIfPortIndex INTEGER,
|
|
cmrwLocalMultiIfLinkIndex INTEGER,
|
|
cmrwLocalMultiIfInstanceIndex INTEGER,
|
|
cmrwLocalMultiIfUEnabled INTEGER,
|
|
cmrwLocalMultiIfVEnabled INTEGER
|
|
}
|
|
|
|
cmrwLocalMultiIfPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalMultiIfEntry 1 }
|
|
|
|
cmrwLocalMultiIfLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalMultiIfEntry 2 }
|
|
|
|
cmrwLocalMultiIfInstanceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses one of several instances
|
|
and is used as index for the other elements in the Table.
|
|
Instances can be
|
|
- U interfaces 1,2,3,4...
|
|
- V interfaces A,B,C,D...
|
|
The numbering format is 1,2,3,4..."
|
|
::= { cmrwLocalMultiIfEntry 3 }
|
|
|
|
cmrwLocalMultiIfUEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether the U1,U2,U3,U4... interface is enabled or not.
|
|
1 Disabled Interface is disabled
|
|
2 Enabled Interface is enabled
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwLocalMultiIfEntry 4 }
|
|
|
|
cmrwLocalMultiIfVEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether the V_A,V_B,V_C,V_D... interface is enabled or not.
|
|
1 Disabled Interface is disabled
|
|
2 Enabled Interface is enabled
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwLocalMultiIfEntry 5 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW CommonMcsCh
|
|
--------------------------------------------------------------------------------
|
|
cmrwLocalCommonMultiChTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwLocalCommonMultiChEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwLocal 13 }
|
|
|
|
cmrwLocalCommonMultiChEntry OBJECT-TYPE
|
|
SYNTAX CmrwLocalCommonMultiChEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwLocalCommonMultiChPortIndex, cmrwLocalCommonMultiChLinkIndex, cmrwLocalCommonMultiChannelIndex }
|
|
::= { cmrwLocalCommonMultiChTable 1 }
|
|
|
|
CmrwLocalCommonMultiChEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwLocalCommonMultiChPortIndex INTEGER,
|
|
cmrwLocalCommonMultiChLinkIndex INTEGER,
|
|
cmrwLocalCommonMultiChannelIndex INTEGER,
|
|
cmrwLocalCommonMultiChMcsEnabled INTEGER
|
|
}
|
|
|
|
cmrwLocalCommonMultiChPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalCommonMultiChEntry 1 }
|
|
|
|
cmrwLocalCommonMultiChLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalCommonMultiChEntry 2 }
|
|
|
|
cmrwLocalCommonMultiChannelIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses one of several instances
|
|
and is used as index for the other elements in the Table.
|
|
Instances can be
|
|
- MCS channels a,b,c,d...
|
|
- U interfaces 1,2,3,4...
|
|
- V interfaces A,B,C,D...
|
|
The numbering format is 1,2,3,4..."
|
|
::= { cmrwLocalCommonMultiChEntry 3 }
|
|
|
|
cmrwLocalCommonMultiChMcsEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether the MCS channel a,b,c,d... is enabled or not.
|
|
1 Disabled Channel is disabled
|
|
2 Enabled CHannel is enabled
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwLocalCommonMultiChEntry 4 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW Local L2Switch
|
|
--------------------------------------------------------------------------------
|
|
cmrwLocalL2SwitchTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwLocalL2SwitchEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwLocal 14 }
|
|
|
|
cmrwLocalL2SwitchEntry OBJECT-TYPE
|
|
SYNTAX CmrwLocalL2SwitchEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwLocalL2SwitchPortIndex, cmrwLocalL2SwitchLinkIndex }
|
|
::= { cmrwLocalL2SwitchTable 1 }
|
|
|
|
CmrwLocalL2SwitchEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwLocalL2SwitchPortIndex INTEGER,
|
|
cmrwLocalL2SwitchLinkIndex INTEGER,
|
|
cmrwLocalL2SwitchHugeFrames INTEGER,
|
|
cmrwLocalL2SwitchAdaptiveFlowCtrl INTEGER,
|
|
cmrwLocalL2SwitchFrameLengthCheck INTEGER
|
|
}
|
|
|
|
cmrwLocalL2SwitchPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalL2SwitchEntry 1 }
|
|
|
|
cmrwLocalL2SwitchLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalL2SwitchEntry 2 }
|
|
|
|
cmrwLocalL2SwitchHugeFrames OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the Layer 2 Switch supports so-called Huge Frames
|
|
(frames longer than 1522 bytes).
|
|
1 Disabled Huge frames will be discarded
|
|
2 Enabled Huge frames allowed
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwLocalL2SwitchEntry 3 }
|
|
|
|
cmrwLocalL2SwitchAdaptiveFlowCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether adaptive flow control on the Layer 2 Switch and on the
|
|
HDLC bridge is enabled (to avoid packet loss) or not.
|
|
1 Disabled Disable adaptive flow control
|
|
2 Enabled Enable adaptive flow control
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwLocalL2SwitchEntry 4 }
|
|
|
|
cmrwLocalL2SwitchFrameLengthCheck OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether frame length check on the Layer 2 Switch is enabled or not.
|
|
1 Disabled Disable frame length check
|
|
2 Enabled Enable frame length check
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwLocalL2SwitchEntry 5 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW local Mapping
|
|
--------------------------------------------------------------------------------
|
|
cmrwLocalMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwLocalMappingEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwLocal 15 }
|
|
|
|
cmrwLocalMappingEntry OBJECT-TYPE
|
|
SYNTAX CmrwLocalMappingEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwLocalMappingPortIndex, cmrwLocalMappingLinkIndex }
|
|
::= { cmrwLocalMappingTable 1 }
|
|
|
|
CmrwLocalMappingEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwLocalMappingPortIndex INTEGER,
|
|
cmrwLocalMappingLinkIndex INTEGER,
|
|
cmrwLocalMappingEnabled INTEGER,
|
|
cmrwLocalMappingMixedOperation INTEGER,
|
|
cmrwLocalMappingOmitSTS INTEGER,
|
|
cmrwLocalMappingSTSPosition INTEGER,
|
|
cmrwLocalMappingTxTs0 INTEGER
|
|
}
|
|
|
|
cmrwLocalMappingPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwLocalMappingEntry 1 }
|
|
|
|
cmrwLocalMappingLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwLocalMappingEntry 2 }
|
|
|
|
cmrwLocalMappingEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether Mapping is enabled or disabled.
|
|
1 Disabled Mapping is disabled
|
|
2 Enabled Mapping is enabled
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalMappingEntry 3 }
|
|
|
|
cmrwLocalMappingMixedOperation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether Mixed Operation (Data to Structured TDM) is enabled or disabled.
|
|
1 Disabled Mixed Operation is disabled
|
|
2 Enabled Mixed Operation is enabled
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalMappingEntry 4 }
|
|
|
|
cmrwLocalMappingOmitSTS OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transmit(1),
|
|
omit(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether the Signalization Timeslot is actually being transmitted or just mapped, not transmitted.
|
|
1 Transmit STS is transmitted
|
|
2 Omit STS is mapped, but not transmitted
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalMappingEntry 5 }
|
|
|
|
cmrwLocalMappingSTSPosition OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unchanged(1),
|
|
tsPos1(2),
|
|
tsPos2(3),
|
|
tsPos3(4),
|
|
tsPos4(5),
|
|
tsPos5(6),
|
|
tsPos6(7),
|
|
tsPos7(8),
|
|
tsPos8(9),
|
|
tsPos9(10),
|
|
tsPos10(11),
|
|
tsPos11(12),
|
|
tsPos12(13),
|
|
tsPos13(14),
|
|
tsPos14(15),
|
|
tsPos15(16),
|
|
tsPos16(17),
|
|
tsPos17(18),
|
|
tsPos18(19),
|
|
tsPos19(20),
|
|
tsPos20(21),
|
|
tsPos21(22),
|
|
tsPos22(23),
|
|
tsPos23(24),
|
|
tsPos24(25),
|
|
tsPos25(26),
|
|
tsPos26(27),
|
|
tsPos27(28),
|
|
tsPos28(29),
|
|
tsPos29(30),
|
|
tsPos30(31),
|
|
tsPos31(32),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the position of the Signalization Timeslot.
|
|
1 unchanged STS mapping is disabled
|
|
2 tsPos1 STS position: Timeslot 1
|
|
3 tsPos2 STS position: Timeslot 2
|
|
4 tsPos3 STS position: Timeslot 3
|
|
5 tsPos4 STS position: Timeslot 4
|
|
6 tsPos5 STS position: Timeslot 5
|
|
7 tsPos6 STS position: Timeslot 6
|
|
8 tsPos7 STS position: Timeslot 7
|
|
9 tsPos8 STS position: Timeslot 8
|
|
10 tsPos9 STS position: Timeslot 9
|
|
11 tsPos10 STS position: Timeslot 10
|
|
12 tsPos11 STS position: Timeslot 11
|
|
13 tsPos12 STS position: Timeslot 12
|
|
14 tsPos13 STS position: Timeslot 13
|
|
15 tsPos14 STS position: Timeslot 14
|
|
16 tsPos15 STS position: Timeslot 15
|
|
17 tsPos16 STS position: Timeslot 16
|
|
18 tsPos17 STS position: Timeslot 17
|
|
19 tsPos18 STS position: Timeslot 18
|
|
20 tsPos19 STS position: Timeslot 19
|
|
21 tsPos20 STS position: Timeslot 20
|
|
22 tsPos21 STS position: Timeslot 21
|
|
23 tsPos22 STS position: Timeslot 22
|
|
24 tsPos23 STS position: Timeslot 23
|
|
25 tsPos24 STS position: Timeslot 24
|
|
26 tsPos25 STS position: Timeslot 25
|
|
27 tsPos26 STS position: Timeslot 26
|
|
28 tsPos27 STS position: Timeslot 27
|
|
29 tsPos28 STS position: Timeslot 28
|
|
30 tsPos29 STS position: Timeslot 29
|
|
31 tsPos30 STS position: Timeslot 30
|
|
32 tsPos31 STS position: Timeslot 31
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalMappingEntry 6 }
|
|
|
|
cmrwLocalMappingTxTs0 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether timeslot 0 is transmitted on the U interface.
|
|
1 Disabled TS0 is not transmitted
|
|
2 Enabled TS0 is transmitted
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwLocalMappingEntry 7 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW far Clock
|
|
--------------------------------------------------------------------------------
|
|
cmrwFarClockTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwFarClockEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwFar 3 }
|
|
|
|
cmrwFarClockEntry OBJECT-TYPE
|
|
SYNTAX CmrwFarClockEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwFarClockPortIndex, cmrwFarClockLinkIndex }
|
|
::= { cmrwFarClockTable 1 }
|
|
|
|
CmrwFarClockEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwFarClockPortIndex INTEGER,
|
|
cmrwFarClockLinkIndex INTEGER,
|
|
cmrwFarClockActive INTEGER,
|
|
cmrwFarClockT3InAvailable INTEGER,
|
|
cmrwFarClockTInterfaceAvailable INTEGER,
|
|
cmrwFarClockUInterfaceAvailable INTEGER,
|
|
cmrwFarClockInternalAvailable INTEGER,
|
|
cmrwFarClockPriority OCTET STRING
|
|
}
|
|
|
|
cmrwFarClockPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwFarClockEntry 1 }
|
|
|
|
cmrwFarClockLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwFarClockEntry 2 }
|
|
|
|
cmrwFarClockActive OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
t3in(1),
|
|
tInterface(2),
|
|
uInterface(3),
|
|
internal(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates which clock source is currently being used.
|
|
1 T3In Uses Clock input T3In
|
|
2 TInterface Taking Clock from signal on T-Interface
|
|
3 UInterface Taking Clock from signal on U-Interface
|
|
4 Internal Using internal oscillator to generate Clock
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarClockEntry 3 }
|
|
|
|
cmrwFarClockT3InAvailable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false(1),
|
|
true(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reports whether Clock Input T3In is available
|
|
1 False Clock Input T3In not available
|
|
2 True Clock Input T3In available
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarClockEntry 4 }
|
|
|
|
cmrwFarClockTInterfaceAvailable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false(1),
|
|
true(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reports whether a clock signal can be derrived from the signal
|
|
on the T-Interface
|
|
1 False Clock signal available
|
|
2 True Clock signal available
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarClockEntry 5 }
|
|
|
|
cmrwFarClockUInterfaceAvailable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false(1),
|
|
true(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reports whether a clock signal can be derrived from the signal
|
|
on the U-Interface
|
|
1 False Clock signal available
|
|
2 True Clock signal available
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarClockEntry 6 }
|
|
|
|
cmrwFarClockInternalAvailable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false(1),
|
|
true(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reports whether the internal oscillator is available
|
|
1 False oscillator not available
|
|
2 True oscillator available
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarClockEntry 7 }
|
|
|
|
cmrwFarClockPriority OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to read and set the clock priority for the different
|
|
clock sources. The variable is an array with length 4. The
|
|
indices correspond to the priorities (0=highest, 3=lowest).
|
|
The following values can be contained in each position,
|
|
indicating which clock source has the corresponding priority:
|
|
1 T3In Clock Input T3In
|
|
2 TInterface Clock derrived from Signal at T-Interface
|
|
3 UInterface Clock derrived from Signal at U-Interface
|
|
4 Internal Internal oscillator
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarClockEntry 8 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW far 2M
|
|
--------------------------------------------------------------------------------
|
|
cmrwFar2MTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwFar2MEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwFar 4 }
|
|
|
|
cmrwFar2MEntry OBJECT-TYPE
|
|
SYNTAX CmrwFar2MEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwFar2MPortIndex, cmrwFar2MLinkIndex }
|
|
::= { cmrwFar2MTable 1 }
|
|
|
|
CmrwFar2MEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwFar2MPortIndex INTEGER,
|
|
cmrwFar2MLinkIndex INTEGER,
|
|
cmrwFar2MFraming INTEGER,
|
|
cmrwFar2MEnableT INTEGER,
|
|
cmrwFar2MTimeslotsT INTEGER,
|
|
cmrwFar2MIdlecodeT INTEGER,
|
|
cmrwFar2MCrc4T INTEGER,
|
|
cmrwFar2MCrc4U INTEGER,
|
|
cmrwFar2MDetectAis INTEGER,
|
|
cmrwFar2MInsertAis INTEGER,
|
|
cmrwFar2MSaBits OCTET STRING,
|
|
cmrwFar2MTs16Signalling INTEGER,
|
|
cmrwFar2MIdlecodeU INTEGER,
|
|
cmrwFar2MTs0Present INTEGER,
|
|
cmrwFar2MCrc4V INTEGER,
|
|
cmrwFar2MInterfaceImpedance INTEGER
|
|
}
|
|
|
|
cmrwFar2MPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwFar2MEntry 1 }
|
|
|
|
cmrwFar2MLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwFar2MEntry 2 }
|
|
|
|
cmrwFar2MFraming OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transparent(1),
|
|
monitoring(2),
|
|
termination(3),
|
|
channelized(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Configures Frame Alignment
|
|
1 Transparent No frame or multi-frame synchronisation
|
|
2 Monitoring Frame and Multi-Frame synchronisation but no reinsertion of Frame
|
|
3 Termination Frame and Multi-Frame synchronisation and reinsertion
|
|
4 Channelized Frame and Multi-Frame synchronisation without transmission of timeslot 0 254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFar2MEntry 3 }
|
|
|
|
cmrwFar2MEnableT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable or disable the G.703 interface (T-Interface)
|
|
1 Disabled G.703 Interface is disabled
|
|
2 Enabled G.703 Interface is enabled
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFar2MEntry 4 }
|
|
|
|
cmrwFar2MTimeslotsT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
bw64(1),
|
|
bw128(2),
|
|
bw192(3),
|
|
bw256(4),
|
|
bw320(5),
|
|
bw384(6),
|
|
bw448(7),
|
|
bw512(8),
|
|
bw576(9),
|
|
bw640(10),
|
|
bw704(11),
|
|
bw768(12),
|
|
bw832(13),
|
|
bw896(14),
|
|
bw960(15),
|
|
bw1024(16),
|
|
bw1088(17),
|
|
bw1152(18),
|
|
bw1216(19),
|
|
bw1280(20),
|
|
bw1344(21),
|
|
bw1408(22),
|
|
bw1472(23),
|
|
bw1536(24),
|
|
bw1600(25),
|
|
bw1664(26),
|
|
bw1728(27),
|
|
bw1792(28),
|
|
bw1856(29),
|
|
bw1920(30),
|
|
bw1984(31),
|
|
bw2048(32),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bandwidth allocated for G.703 Interface (T-Interface) as
|
|
a number of 64kbit/s time slots. Between 1 and 32.
|
|
|
|
When reading the following values can also be returned:
|
|
1 bw64 Bandwidth 64 kbit/s
|
|
2 bw128 Bandwidth 128 kbit/s
|
|
3 bw192 Bandwidth 192 kbit/s
|
|
4 bw256 Bandwidth 256 kbit/s
|
|
5 bw320 Bandwidth 320 kbit/s
|
|
6 bw384 Bandwidth 384 kbit/s
|
|
7 bw448 Bandwidth 448 kbit/s
|
|
8 bw512 Bandwidth 512 kbit/s
|
|
9 bw576 Bandwidth 576 kbit/s
|
|
10 bw640 Bandwidth 640 kbit/s
|
|
11 bw704 Bandwidth 704 kbit/s
|
|
12 bw768 Bandwidth 768 kbit/s
|
|
13 bw832 Bandwidth 832 kbit/s
|
|
14 bw896 Bandwidth 896 kbit/s
|
|
15 bw960 Bandwidth 960 kbit/s
|
|
16 bw1024 Bandwidth 1024 kbit/s
|
|
17 bw1088 Bandwidth 1088 kbit/s
|
|
18 bw1152 Bandwidth 1152 kbit/s
|
|
19 bw1216 Bandwidth 1216 kbit/s
|
|
20 bw1280 Bandwidth 1280 kbit/s
|
|
21 bw1344 Bandwidth 1344 kbit/s
|
|
22 bw1408 Bandwidth 1408 kbit/s
|
|
23 bw1472 Bandwidth 1472 kbit/s
|
|
24 bw1536 Bandwidth 1536 kbit/s
|
|
25 bw1600 Bandwidth 1600 kbit/s
|
|
26 bw1664 Bandwidth 1664 kbit/s
|
|
27 bw1728 Bandwidth 1728 kbit/s
|
|
28 bw1792 Bandwidth 1792 kbit/s
|
|
29 bw1856 Bandwidth 1856 kbit/s
|
|
30 bw1920 Bandwidth 1920 kbit/s
|
|
31 bw1984 Bandwidth 1984 kbit/s
|
|
32 bw2048 Bandwidth 2048 kbit/s
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFar2MEntry 5 }
|
|
|
|
cmrwFar2MIdlecodeT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ais(1),
|
|
es(2),
|
|
pais(3),
|
|
none(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the Idle Code on the T-Interface.
|
|
1 AIS AIS
|
|
2 ES ES
|
|
3 PAIS PAIS
|
|
4 None No Idle Code
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFar2MEntry 6 }
|
|
|
|
cmrwFar2MCrc4T OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(1),
|
|
on(2),
|
|
autoOff(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether CRC-4 evaluation at the T-Interface is done.
|
|
1 Off CRC-4 Data is not evaluated
|
|
2 On CRC-4 Data is evaluated, error if none present in signal
|
|
3 AutoOff CRC-4 Data is evaluated, if none is present, evaluation is disabled
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFar2MEntry 7 }
|
|
|
|
cmrwFar2MCrc4U OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(1),
|
|
on(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether CRC-4 evaluation at the U-Interface is done.
|
|
1 Off CRC-4 Data is not evaluated
|
|
2 On CRC-4 Data is evaluated, error if none present in signal
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFar2MEntry 8 }
|
|
|
|
cmrwFar2MDetectAis OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noDetect(1),
|
|
detect(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether AIS detection is enabled or not
|
|
1 NoDetect AIS is not detected
|
|
2 Detect AIS is detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFar2MEntry 9 }
|
|
|
|
cmrwFar2MInsertAis OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noInsertion(1),
|
|
insertion(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether an AIS signal is regenerated or just passed through
|
|
1 NoInsertion Pass signal through
|
|
2 Insertion Regenerate signal
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFar2MEntry 10 }
|
|
|
|
cmrwFar2MSaBits OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(6))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the Sa-bit configuration. The variable is an array with length 6.
|
|
The indicies address the Sa bits as follows:
|
|
[0] Sa4
|
|
[1] Sa5
|
|
[2] Sa6
|
|
[3] Sa7
|
|
[4] Sa8
|
|
[5] Sa6 Loop Detection
|
|
Positions 0,3 and 4 (Sa4, Sa7, Sa8) can contain the following values:
|
|
1 Transparent
|
|
2 Constant Ones
|
|
Position 1 (Sa5) can contain the following values:
|
|
1 Transparent
|
|
2 Constant Ones
|
|
3 Insert
|
|
Position 2 (Sa6) can contain the following values:
|
|
1 Transparent
|
|
2 Constant Ones
|
|
3 ETSI Norm
|
|
4 ANSI Norm
|
|
Position 5 (Sa6 Loop Detection) can contain the following values:
|
|
1 Loop Detection Off
|
|
2 Loop Detection On
|
|
|
|
All 6 positions can contain the values below:
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFar2MEntry 11 }
|
|
|
|
cmrwFar2MTs16Signalling OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transparent(1),
|
|
new(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether time slot 16 is passed through transparently or
|
|
whether it is reinsertet.
|
|
1 Transparent Passing through TS16
|
|
2 New Reinserting TS16
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFar2MEntry 12 }
|
|
|
|
cmrwFar2MIdlecodeU OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ais(1),
|
|
es(2),
|
|
pais(3),
|
|
none(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the Idle Code on the U-Interface.
|
|
1 AIS AIS
|
|
2 ES ES
|
|
3 PAIS PAIS
|
|
4 none no Idle Code
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFar2MEntry 13 }
|
|
|
|
cmrwFar2MTs0Present OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(1),
|
|
yes(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether timeslot 0 (G.704 frame) is actually
|
|
transmitted by the U interface.
|
|
1 No Timeslot 0 is re-inserted by receiver
|
|
2 Yes Timeslot 0 is actually sent
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFar2MEntry 14 }
|
|
|
|
cmrwFar2MCrc4V OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(1),
|
|
on(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether CRC-4 evaluation at the V-Interfaces is done.
|
|
1 Off CRC-4 Data is not evaluated
|
|
2 On CRC-4 Data is evaluated, error if none present in signal
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFar2MEntry 15 }
|
|
|
|
cmrwFar2MInterfaceImpedance OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ohm75(75),
|
|
ohm120(120),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the impedance of the G.703 interface.
|
|
75 ohm75 The impedance of the G.703 interface is 75 Ohm.
|
|
120 ohm120 The impedance of the G.703 interface is 120 Ohm.
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFar2MEntry 16 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW far Data
|
|
--------------------------------------------------------------------------------
|
|
cmrwFarDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwFarDataEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwFar 5 }
|
|
|
|
cmrwFarDataEntry OBJECT-TYPE
|
|
SYNTAX CmrwFarDataEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwFarDataPortIndex, cmrwFarDataLinkIndex }
|
|
::= { cmrwFarDataTable 1 }
|
|
|
|
CmrwFarDataEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwFarDataPortIndex INTEGER,
|
|
cmrwFarDataLinkIndex INTEGER,
|
|
cmrwFarDataEnabledD INTEGER,
|
|
cmrwFarDataTimeslotsD INTEGER,
|
|
cmrwFarDataIdlecodeD INTEGER,
|
|
cmrwFarDataFastSig INTEGER,
|
|
cmrwFarDataLine106 INTEGER,
|
|
cmrwFarDataLine107 INTEGER,
|
|
cmrwFarDataLine109 INTEGER,
|
|
cmrwFarDataLine140 INTEGER,
|
|
cmrwFarDataLine141 INTEGER,
|
|
cmrwFarDataUseTs16ForData INTEGER,
|
|
cmrwFarDataEndToEndSignalling INTEGER,
|
|
cmrwFarDataDteDceMode INTEGER,
|
|
cmrwFarDataIfSelector INTEGER
|
|
}
|
|
|
|
cmrwFarDataPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwFarDataEntry 1 }
|
|
|
|
cmrwFarDataLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwFarDataEntry 2 }
|
|
|
|
cmrwFarDataEnabledD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether the Data Interface is enabled or not.
|
|
1 Disabled Data Interface is disabled
|
|
2 Enabled Data Interface is enabled
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarDataEntry 3 }
|
|
|
|
cmrwFarDataTimeslotsD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
bw64(1),
|
|
bw128(2),
|
|
bw192(3),
|
|
bw256(4),
|
|
bw320(5),
|
|
bw384(6),
|
|
bw448(7),
|
|
bw512(8),
|
|
bw576(9),
|
|
bw640(10),
|
|
bw704(11),
|
|
bw768(12),
|
|
bw832(13),
|
|
bw896(14),
|
|
bw960(15),
|
|
bw1024(16),
|
|
bw1088(17),
|
|
bw1152(18),
|
|
bw1216(19),
|
|
bw1280(20),
|
|
bw1344(21),
|
|
bw1408(22),
|
|
bw1472(23),
|
|
bw1536(24),
|
|
bw1600(25),
|
|
bw1664(26),
|
|
bw1728(27),
|
|
bw1792(28),
|
|
bw1856(29),
|
|
bw1920(30),
|
|
bw1984(31),
|
|
bw2048(32),
|
|
bw2112(33),
|
|
bw2176(34),
|
|
bw2240(35),
|
|
bw2304(36),
|
|
bw2368(37),
|
|
bw2432(38),
|
|
bw2496(39),
|
|
bw2560(40),
|
|
bw2624(41),
|
|
bw2688(42),
|
|
bw2752(43),
|
|
bw2816(44),
|
|
bw2880(45),
|
|
bw2944(46),
|
|
bw3008(47),
|
|
bw3072(48),
|
|
bw3136(49),
|
|
bw3200(50),
|
|
bw3264(51),
|
|
bw3328(52),
|
|
bw3392(53),
|
|
bw3456(54),
|
|
bw3520(55),
|
|
bw3584(56),
|
|
bw3648(57),
|
|
bw3712(58),
|
|
bw3776(59),
|
|
bw3840(60),
|
|
bw3904(61),
|
|
bw3968(62),
|
|
bw4032(63),
|
|
bw4096(64),
|
|
bw4160(65),
|
|
bw4224(66),
|
|
bw4288(67),
|
|
bw4352(68),
|
|
bw4416(69),
|
|
bw4480(70),
|
|
bw4544(71),
|
|
bw4608(72),
|
|
bw4672(73),
|
|
bw4736(74),
|
|
bw4800(75),
|
|
bw4864(76),
|
|
bw4928(77),
|
|
bw4992(78),
|
|
bw5056(79),
|
|
bw5120(80),
|
|
bw5184(81),
|
|
bw5248(82),
|
|
bw5312(83),
|
|
bw5376(84),
|
|
bw5440(85),
|
|
bw5504(86),
|
|
bw5568(87),
|
|
bw5632(88),
|
|
bw5696(89),
|
|
bw5760(90),
|
|
bw5824(91),
|
|
bw5888(92),
|
|
bw5952(93),
|
|
bw6016(94),
|
|
bw6080(95),
|
|
bw6144(96),
|
|
bw6208(97),
|
|
bw6272(98),
|
|
bw6336(99),
|
|
bw6400(100),
|
|
bw6464(101),
|
|
bw6528(102),
|
|
bw6592(103),
|
|
bw6656(104),
|
|
bw6720(105),
|
|
bw6784(106),
|
|
bw6848(107),
|
|
bw6912(108),
|
|
bw6976(109),
|
|
bw7040(110),
|
|
bw7104(111),
|
|
bw7168(112),
|
|
bw7232(113),
|
|
bw7296(114),
|
|
bw7360(115),
|
|
bw7424(116),
|
|
bw7488(117),
|
|
bw7552(118),
|
|
bw7616(119),
|
|
bw7680(120),
|
|
bw7744(121),
|
|
bw7808(122),
|
|
bw7872(123),
|
|
bw7936(124),
|
|
bw8000(125),
|
|
bw8064(126),
|
|
bw8128(127),
|
|
bw8192(128),
|
|
bw8256(129),
|
|
bw8320(130),
|
|
bw8384(131),
|
|
bw8448(132),
|
|
bw8512(133),
|
|
bw8576(134),
|
|
bw8640(135),
|
|
bw8704(136),
|
|
bw8768(137),
|
|
bw8832(138),
|
|
bw8896(139),
|
|
bw8960(140),
|
|
bw9024(141),
|
|
bw9088(142),
|
|
bw9152(143),
|
|
bw9216(144),
|
|
bw9280(145),
|
|
bw9344(146),
|
|
bw9408(147),
|
|
bw9472(148),
|
|
bw9536(149),
|
|
bw9600(150),
|
|
bw9664(151),
|
|
bw9728(152),
|
|
bw9792(153),
|
|
bw9856(154),
|
|
bw9920(155),
|
|
bw9984(156),
|
|
bw10048(157),
|
|
bw10112(158),
|
|
bw10176(159),
|
|
bw10240(160),
|
|
bw10304(161),
|
|
bw10368(162),
|
|
bw10432(163),
|
|
bw10496(164),
|
|
bw10560(165),
|
|
bw10624(166),
|
|
bw10688(167),
|
|
bw10752(168),
|
|
bw10816(169),
|
|
bw10880(170),
|
|
bw10944(171),
|
|
bw11008(172),
|
|
bw11072(173),
|
|
bw11136(174),
|
|
bw11200(175),
|
|
bw11264(176),
|
|
bw11328(177),
|
|
bw11392(178),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bandwidth allocated for G.703 Interface (T-Interface) as
|
|
a number of 64kbit/s time slots.
|
|
|
|
When reading the following values can also be returned:
|
|
1 bw64 Bandwidth 64 kbit/s
|
|
2 bw128 Bandwidth 128 kbit/s
|
|
3 bw192 Bandwidth 192 kbit/s
|
|
4 bw256 Bandwidth 256 kbit/s
|
|
5 bw320 Bandwidth 320 kbit/s
|
|
6 bw384 Bandwidth 384 kbit/s
|
|
7 bw448 Bandwidth 448 kbit/s
|
|
8 bw512 Bandwidth 512 kbit/s
|
|
9 bw576 Bandwidth 576 kbit/s
|
|
10 bw640 Bandwidth 640 kbit/s
|
|
11 bw704 Bandwidth 704 kbit/s
|
|
12 bw768 Bandwidth 768 kbit/s
|
|
13 bw832 Bandwidth 832 kbit/s
|
|
14 bw896 Bandwidth 896 kbit/s
|
|
15 bw960 Bandwidth 960 kbit/s
|
|
16 bw1024 Bandwidth 1024 kbit/s
|
|
17 bw1088 Bandwidth 1088 kbit/s
|
|
18 bw1152 Bandwidth 1152 kbit/s
|
|
19 bw1216 Bandwidth 1216 kbit/s
|
|
20 bw1280 Bandwidth 1280 kbit/s
|
|
21 bw1344 Bandwidth 1344 kbit/s
|
|
22 bw1408 Bandwidth 1408 kbit/s
|
|
23 bw1472 Bandwidth 1472 kbit/s
|
|
24 bw1536 Bandwidth 1536 kbit/s
|
|
25 bw1600 Bandwidth 1600 kbit/s
|
|
26 bw1664 Bandwidth 1664 kbit/s
|
|
27 bw1728 Bandwidth 1728 kbit/s
|
|
28 bw1792 Bandwidth 1792 kbit/s
|
|
29 bw1856 Bandwidth 1856 kbit/s
|
|
30 bw1920 Bandwidth 1920 kbit/s
|
|
31 bw1984 Bandwidth 1984 kbit/s
|
|
32 bw2048 Bandwidth 2048 kbit/s
|
|
33 bw2112 Bandwidth 2112 kbit/s
|
|
34 bw2176 Bandwidth 2176 kbit/s
|
|
35 bw2240 Bandwidth 2240 kbit/s
|
|
36 bw2304 Bandwidth 2304 kbit/s
|
|
37 bw2368 Bandwidth 2368 kbit/s
|
|
38 bw2432 Bandwidth 2432 kbit/s
|
|
39 bw2496 Bandwidth 2496 kbit/s
|
|
40 bw2560 Bandwidth 2560 kbit/s
|
|
41 bw2624 Bandwidth 2624 kbit/s
|
|
42 bw2688 Bandwidth 2688 kbit/s
|
|
43 bw2752 Bandwidth 2752 kbit/s
|
|
44 bw2816 Bandwidth 2816 kbit/s
|
|
45 bw2880 Bandwidth 2880 kbit/s
|
|
46 bw2944 Bandwidth 2944 kbit/s
|
|
47 bw3008 Bandwidth 3008 kbit/s
|
|
48 bw3072 Bandwidth 3072 kbit/s
|
|
49 bw3136 Bandwidth 3136 kbit/s
|
|
50 bw3200 Bandwidth 3200 kbit/s
|
|
51 bw3264 Bandwidth 3264 kbit/s
|
|
52 bw3328 Bandwidth 3328 kbit/s
|
|
53 bw3392 Bandwidth 3392 kbit/s
|
|
54 bw3456 Bandwidth 3456 kbit/s
|
|
55 bw3520 Bandwidth 3520 kbit/s
|
|
56 bw3584 Bandwidth 3584 kbit/s
|
|
57 bw3648 Bandwidth 3648 kbit/s
|
|
58 bw3712 Bandwidth 3712 kbit/s
|
|
59 bw3776 Bandwidth 3776 kbit/s
|
|
60 bw3840 Bandwidth 3840 kbit/s
|
|
61 bw3904 Bandwidth 3904 kbit/s
|
|
62 bw3968 Bandwidth 3968 kbit/s
|
|
63 bw4032 Bandwidth 4032 kbit/s
|
|
64 bw4096 Bandwidth 4096 kbit/s
|
|
65 bw4160 Bandwidth 4160 kbit/s
|
|
66 bw4224 Bandwidth 4224 kbit/s
|
|
67 bw4288 Bandwidth 4288 kbit/s
|
|
68 bw4352 Bandwidth 4352 kbit/s
|
|
69 bw4416 Bandwidth 4416 kbit/s
|
|
70 bw4480 Bandwidth 4480 kbit/s
|
|
71 bw4544 Bandwidth 4544 kbit/s
|
|
72 bw4608 Bandwidth 4608 kbit/s
|
|
73 bw4672 Bandwidth 4672 kbit/s
|
|
74 bw4736 Bandwidth 4736 kbit/s
|
|
75 bw4800 Bandwidth 4800 kbit/s
|
|
76 bw4864 Bandwidth 4864 kbit/s
|
|
77 bw4928 Bandwidth 4928 kbit/s
|
|
78 bw4992 Bandwidth 4992 kbit/s
|
|
79 bw5056 Bandwidth 5056 kbit/s
|
|
80 bw5120 Bandwidth 5120 kbit/s
|
|
81 bw5184 Bandwidth 5184 kbit/s
|
|
82 bw5248 Bandwidth 5248 kbit/s
|
|
83 bw5312 Bandwidth 5312 kbit/s
|
|
84 bw5376 Bandwidth 5376 kbit/s
|
|
85 bw5440 Bandwidth 5440 kbit/s
|
|
86 bw5504 Bandwidth 5504 kbit/s
|
|
87 bw5568 Bandwidth 5568 kbit/s
|
|
88 bw5632 Bandwidth 5632 kbit/s
|
|
89 bw5696 Bandwidth 5696 kbit/s
|
|
90 bw5760 Bandwidth 5760 kbit/s
|
|
91 bw5824 Bandwidth 5824 kbit/s
|
|
92 bw5888 Bandwidth 5888 kbit/s
|
|
93 bw5952 Bandwidth 5952 kbit/s
|
|
94 bw6016 Bandwidth 6016 kbit/s
|
|
95 bw6080 Bandwidth 6080 kbit/s
|
|
96 bw6144 Bandwidth 6144 kbit/s
|
|
97 bw6208 Bandwidth 6208 kbit/s
|
|
98 bw6272 Bandwidth 6272 kbit/s
|
|
99 bw6336 Bandwidth 6336 kbit/s
|
|
100 bw6400 Bandwidth 6400 kbit/s
|
|
101 bw6464 Bandwidth 6464 kbit/s
|
|
102 bw6528 Bandwidth 6528 kbit/s
|
|
103 bw6592 Bandwidth 6592 kbit/s
|
|
104 bw6656 Bandwidth 6656 kbit/s
|
|
105 bw6720 Bandwidth 6720 kbit/s
|
|
106 bw6784 Bandwidth 6784 kbit/s
|
|
107 bw6848 Bandwidth 6848 kbit/s
|
|
108 bw6912 Bandwidth 6912 kbit/s
|
|
109 bw6976 Bandwidth 6976 kbit/s
|
|
110 bw7040 Bandwidth 7040 kbit/s
|
|
111 bw7104 Bandwidth 7104 kbit/s
|
|
112 bw7168 Bandwidth 7168 kbit/s
|
|
113 bw7232 Bandwidth 7232 kbit/s
|
|
114 bw7296 Bandwidth 7296 kbit/s
|
|
115 bw7360 Bandwidth 7360 kbit/s
|
|
116 bw7424 Bandwidth 7424 kbit/s
|
|
117 bw7488 Bandwidth 7488 kbit/s
|
|
118 bw7552 Bandwidth 7552 kbit/s
|
|
119 bw7616 Bandwidth 7616 kbit/s
|
|
120 bw7680 Bandwidth 7680 kbit/s
|
|
121 bw7744 Bandwidth 7744 kbit/s
|
|
122 bw7808 Bandwidth 7808 kbit/s
|
|
123 bw7872 Bandwidth 7872 kbit/s
|
|
124 bw7936 Bandwidth 7936 kbit/s
|
|
125 bw8000 Bandwidth 8000 kbit/s
|
|
126 bw8064 Bandwidth 8064 kbit/s
|
|
127 bw8128 Bandwidth 8128 kbit/s
|
|
128 bw8192 Bandwidth 8192 kbit/s
|
|
129 bw8256 Bandwidth 8256 kbit/s
|
|
130 bw8320 Bandwidth 8320 kbit/s
|
|
131 bw8384 Bandwidth 8384 kbit/s
|
|
132 bw8448 Bandwidth 8448 kbit/s
|
|
133 bw8512 Bandwidth 8512 kbit/s
|
|
134 bw8576 Bandwidth 8576 kbit/s
|
|
135 bw8640 Bandwidth 8640 kbit/s
|
|
136 bw8704 Bandwidth 8704 kbit/s
|
|
137 bw8768 Bandwidth 8768 kbit/s
|
|
138 bw8832 Bandwidth 8832 kbit/s
|
|
139 bw8896 Bandwidth 8896 kbit/s
|
|
140 bw8960 Bandwidth 8960 kbit/s
|
|
141 bw9024 Bandwidth 9024 kbit/s
|
|
142 bw9088 Bandwidth 9088 kbit/s
|
|
143 bw9152 Bandwidth 9152 kbit/s
|
|
144 bw9216 Bandwidth 9216 kbit/s
|
|
145 bw9280 Bandwidth 9280 kbit/s
|
|
146 bw9344 Bandwidth 9344 kbit/s
|
|
147 bw9408 Bandwidth 9408 kbit/s
|
|
148 bw9472 Bandwidth 9472 kbit/s
|
|
149 bw9536 Bandwidth 9536 kbit/s
|
|
150 bw9600 Bandwidth 9600 kbit/s
|
|
151 bw9664 Bandwidth 9664 kbit/s
|
|
152 bw9728 Bandwidth 9728 kbit/s
|
|
153 bw9792 Bandwidth 9792 kbit/s
|
|
154 bw9856 Bandwidth 9856 kbit/s
|
|
155 bw9920 Bandwidth 9920 kbit/s
|
|
156 bw9984 Bandwidth 9984 kbit/s
|
|
157 bw10048 Bandwidth 10048 kbit/s
|
|
158 bw10112 Bandwidth 10112 kbit/s
|
|
159 bw10176 Bandwidth 10176 kbit/s
|
|
160 bw10240 Bandwidth 10240 kbit/s
|
|
161 bw10304 Bandwidth 10304 kbit/s
|
|
162 bw10368 Bandwidth 10368 kbit/s
|
|
163 bw10432 Bandwidth 10432 kbit/s
|
|
164 bw10496 Bandwidth 10496 kbit/s
|
|
165 bw10560 Bandwidth 10560 kbit/s
|
|
166 bw10624 Bandwidth 10624 kbit/s
|
|
167 bw10688 Bandwidth 10688 kbit/s
|
|
168 bw10752 Bandwidth 10752 kbit/s
|
|
169 bw10816 Bandwidth 10816 kbit/s
|
|
170 bw10880 Bandwidth 10880 kbit/s
|
|
171 bw10944 Bandwidth 10944 kbit/s
|
|
172 bw11008 Bandwidth 11008 kbit/s
|
|
173 bw11072 Bandwidth 11072 kbit/s
|
|
174 bw11136 Bandwidth 11136 kbit/s
|
|
175 bw11200 Bandwidth 11200 kbit/s
|
|
176 bw11264 Bandwidth 11264 kbit/s
|
|
177 bw11328 Bandwidth 11328 kbit/s
|
|
178 bw11392 Bandwidth 11392 kbit/s
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarDataEntry 4 }
|
|
|
|
cmrwFarDataIdlecodeD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
null(1),
|
|
ais(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the Idle Code for the Data Interface.
|
|
1 Null Always send 0
|
|
2 Ais Always send 1
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarDataEntry 5 }
|
|
|
|
cmrwFarDataFastSig OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(1),
|
|
on(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether Fast Signalling is used or not
|
|
1 Off Fast Signalling is not used
|
|
2 On Fast Signalling is used
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarDataEntry 6 }
|
|
|
|
cmrwFarDataLine106 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
perm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether control line 106 is set automatically or
|
|
permanently turned on.
|
|
1 Auto Automatically set
|
|
2 Perm Permanently on
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarDataEntry 7 }
|
|
|
|
cmrwFarDataLine107 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
perm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether control line 107 is set automatically or
|
|
permanently turned on.
|
|
1 Auto Automatically set
|
|
2 Perm Permanently on
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarDataEntry 8 }
|
|
|
|
cmrwFarDataLine109 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
perm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether control line 109 is set automatically or
|
|
permanently turned on.
|
|
1 Auto Automatically set
|
|
2 Perm Permanently on
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarDataEntry 9 }
|
|
|
|
cmrwFarDataLine140 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
perm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether control line 140 is set automatically or
|
|
permanently turned off.
|
|
1 Auto Automatically set
|
|
2 Perm Permanently off
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarDataEntry 10 }
|
|
|
|
cmrwFarDataLine141 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
perm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether control line 141 is set automatically or
|
|
permanently turned off.
|
|
1 Auto Automatically set
|
|
2 Perm Permanently off
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarDataEntry 11 }
|
|
|
|
cmrwFarDataUseTs16ForData OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(1),
|
|
yes(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether timeslot 16 can be used for data when
|
|
no signalling information is transmitted in it.
|
|
1 No Timeslot 16 is reserved even if no signalling is used
|
|
2 Yes Timeslot 16 is used for data if no signalling is used
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarDataEntry 12 }
|
|
|
|
cmrwFarDataEndToEndSignalling OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
fastSig(2),
|
|
cas(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether End To End Signalling is enabled.
|
|
1 Disabled End To End Signalling is disabled
|
|
2 FastSig End To End Signalling is fast signalling
|
|
3 CAS End To End Signalling is CAS
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarDataEntry 13 }
|
|
|
|
cmrwFarDataDteDceMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
dce(1),
|
|
dte(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the operation mode of the data interface.
|
|
1 DCE Data Interface operates in DCE (Data Circuit-Terminating Equipment) mode
|
|
2 DTE Data Interface operates in DTE (Data Terminal Equipment) mode
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarDataEntry 14 }
|
|
|
|
cmrwFarDataIfSelector OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
mgblEthIf(1),
|
|
multiPurpDataIf(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Selects the active data Interface.
|
|
1 mgblEthIf Manageable Ethernet Interface is selected
|
|
2 multiPurpDataIf Multi Purpose Data Interface is selected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarDataEntry 15 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW far Action
|
|
--------------------------------------------------------------------------------
|
|
cmrwFarActionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwFarActionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwFar 6 }
|
|
|
|
cmrwFarActionEntry OBJECT-TYPE
|
|
SYNTAX CmrwFarActionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwFarActionPortIndex, cmrwFarActionLinkIndex }
|
|
::= { cmrwFarActionTable 1 }
|
|
|
|
CmrwFarActionEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwFarActionPortIndex INTEGER,
|
|
cmrwFarActionLinkIndex INTEGER,
|
|
cmrwFarActionReboot INTEGER
|
|
}
|
|
|
|
cmrwFarActionPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwFarActionEntry 1 }
|
|
|
|
cmrwFarActionLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwFarActionEntry 2 }
|
|
|
|
cmrwFarActionReboot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
passive(1),
|
|
active(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Command to reboot device. The parameter specifies whether
|
|
the firmware in the active or passive bank shall be started.
|
|
1 Passive Reboot using the passive firmware
|
|
2 Active Reboot using the active firmware
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
|
|
If the parameter 'passive' is specified but the passive
|
|
firmware bank contains no valid code, the device reboots
|
|
using the active firmware."
|
|
::= { cmrwFarActionEntry 3 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW Far User Data
|
|
------------------------------------------------------------------------------
|
|
cmrwFarUserDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwFarUserDataEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwFar 7 }
|
|
|
|
cmrwFarUserDataEntry OBJECT-TYPE
|
|
SYNTAX CmrwFarUserDataEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwFarUserDataPortIndex, cmrwFarUserDataLinkIndex, cmrwFarUserDataItemIndex }
|
|
::= { cmrwFarUserDataTable 1 }
|
|
|
|
CmrwFarUserDataEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwFarUserDataPortIndex INTEGER,
|
|
cmrwFarUserDataLinkIndex INTEGER,
|
|
cmrwFarUserDataItemIndex INTEGER,
|
|
cmrwFarUserData DisplayString
|
|
}
|
|
|
|
cmrwFarUserDataPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwFarUserDataEntry 1 }
|
|
|
|
cmrwFarUserDataLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwFarUserDataEntry 2 }
|
|
|
|
cmrwFarUserDataItemIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the data field number of the user data
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwFarUserDataEntry 3 }
|
|
|
|
cmrwFarUserData OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(100))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"User data that can be written to the device"
|
|
::= {cmrwFarUserDataEntry 4 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW Far RPS
|
|
------------------------------------------------------------------------------
|
|
cmrwFarRpsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwFarRpsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwFar 8 }
|
|
|
|
cmrwFarRpsEntry OBJECT-TYPE
|
|
SYNTAX CmrwFarRpsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwFarRpsPortIndex, cmrwFarRpsLinkIndex }
|
|
::= { cmrwFarRpsTable 1 }
|
|
|
|
CmrwFarRpsEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwFarRpsPortIndex INTEGER,
|
|
cmrwFarRpsLinkIndex INTEGER,
|
|
cmrwFarRps INTEGER,
|
|
cmrwFarRpsCurrent INTEGER
|
|
}
|
|
|
|
cmrwFarRpsPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwFarRpsEntry 1 }
|
|
|
|
cmrwFarRpsLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwFarRpsEntry 2 }
|
|
|
|
cmrwFarRps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inactive(1),
|
|
active(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the Remote Power Supply is on/off.
|
|
1 Inactive The RPS is turned off
|
|
2 Active The RPS is turned on
|
|
254 unknown value
|
|
255 unsupported
|
|
"
|
|
::= {cmrwFarRpsEntry 3 }
|
|
|
|
cmrwFarRpsCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
mA50(50),
|
|
mA60(60),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the Remote Power Supply current.
|
|
50 Inactive RPS current limied to 50 mA
|
|
60 Active RPS current limited to 60 mA
|
|
254 unknown value
|
|
255 unsupported
|
|
"
|
|
::= {cmrwFarRpsEntry 4 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW L2SwitchPort
|
|
--------------------------------------------------------------------------------
|
|
cmrwFarL2SwitchPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwFarL2SwitchPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwFar 9 }
|
|
|
|
cmrwFarL2SwitchPortEntry OBJECT-TYPE
|
|
SYNTAX CmrwFarL2SwitchPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwFarL2SwitchPortPortIndex, cmrwFarL2SwitchPortLinkIndex, cmrwFarL2SwitchPortLanPortIndex }
|
|
::= { cmrwFarL2SwitchPortTable 1 }
|
|
|
|
CmrwFarL2SwitchPortEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwFarL2SwitchPortPortIndex INTEGER,
|
|
cmrwFarL2SwitchPortLinkIndex INTEGER,
|
|
cmrwFarL2SwitchPortLanPortIndex INTEGER,
|
|
cmrwFarL2SwitchPortEnabled INTEGER,
|
|
cmrwFarL2SwitchPortPhyCfg INTEGER,
|
|
cmrwFarL2SwitchPortPhyAdvModes INTEGER,
|
|
cmrwFarL2SwitchPortPhyCfgReadout INTEGER,
|
|
cmrwFarL2SwitchPortAutoXover INTEGER,
|
|
cmrwFarL2SwitchPortFlowCtrl INTEGER,
|
|
cmrwFarL2SwitchPortRateLimit INTEGER,
|
|
cmrwFarL2SwitchPortRateLimitCfg INTEGER
|
|
}
|
|
|
|
cmrwFarL2SwitchPortPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwFarL2SwitchPortEntry 1 }
|
|
|
|
cmrwFarL2SwitchPortLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwFarL2SwitchPortEntry 2 }
|
|
|
|
cmrwFarL2SwitchPortLanPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the L2Switch port (LAN side)
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwFarL2SwitchPortEntry 3 }
|
|
|
|
cmrwFarL2SwitchPortEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether the L2Switch port is enabled or not.
|
|
1 Disabled L2Switch port is disabled
|
|
2 Enabled L2Switch port is enabled
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwFarL2SwitchPortEntry 4 }
|
|
|
|
cmrwFarL2SwitchPortPhyCfg OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
full10(1),
|
|
full100(2),
|
|
half10(3),
|
|
half100(4),
|
|
auto(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the ethernet phy config or allows auto negotiation.
|
|
1 Full Duplex 10Mbps
|
|
2 Full Duplex 100Mbps
|
|
3 Half Duplex 10Mbps
|
|
4 Half Duplex 100Mbps
|
|
5 Auto Negotiation
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwFarL2SwitchPortEntry 5 }
|
|
|
|
cmrwFarL2SwitchPortPhyAdvModes OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the phy modes to be offered during auto
|
|
negotiation ('advertized modes').
|
|
Bit 0 1 Full Duplex 10Mbps
|
|
Bit 1 2 Full Duplex 100Mbps
|
|
Bit 2 4 Half Duplex 10Mbps
|
|
Bit 3 8 Half Duplex 100Mbps
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)"
|
|
::= { cmrwFarL2SwitchPortEntry 6 }
|
|
|
|
cmrwFarL2SwitchPortPhyCfgReadout OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
full10(1),
|
|
full100(2),
|
|
half10(3),
|
|
half100(4),
|
|
auto(5),
|
|
linkdown(6),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current ethernet phy config.
|
|
1 Full Duplex 10Mbps
|
|
2 Full Duplex 100Mbps
|
|
3 Half Duplex 10Mbps
|
|
4 Half Duplex 100Mbps
|
|
5 Auto Negotiation
|
|
6 Linkdown
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwFarL2SwitchPortEntry 7 }
|
|
|
|
cmrwFarL2SwitchPortAutoXover OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Determines whether ethernet crossover (MDI/MDI-X)
|
|
should automatically be detected and compensated
|
|
for.
|
|
1 Disabled MDI
|
|
2 Enabled Auto MDI/MDI-X
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwFarL2SwitchPortEntry 8 }
|
|
|
|
cmrwFarL2SwitchPortFlowCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Determines whether flow control should be performed
|
|
on a specific port.
|
|
1 Disabled Flow control disabled
|
|
2 Enabled Flow control enabled
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwFarL2SwitchPortEntry 9 }
|
|
|
|
cmrwFarL2SwitchPortRateLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Determines the maximum bit rate on a specific port
|
|
in 32kbps increments. This setting can be
|
|
overriden by the Rate Limit Cfg setting.
|
|
32 Rate Limit 32kbps
|
|
64 Rate Limit 64kbps
|
|
...
|
|
9216 Rate Limit 9216kbps (equals 4*2304 kbps)
|
|
...
|
|
xxx Rate Limit xxxxkbps
|
|
65534 unknown
|
|
65535 unsupported"
|
|
::= { cmrwFarL2SwitchPortEntry 10 }
|
|
|
|
cmrwFarL2SwitchPortRateLimitCfg OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unlimited(1),
|
|
userN32k(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Determines the behavior of the port rate limiter.
|
|
on a specific port
|
|
1 Unlimited No rate limit enforced
|
|
2 User-Def. n*32k User-defined value in 32k increments
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwFarL2SwitchPortEntry 11 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW Local Multi Interfaces
|
|
--------------------------------------------------------------------------------
|
|
cmrwFarMultiIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwFarMultiIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwFar 10 }
|
|
|
|
cmrwFarMultiIfEntry OBJECT-TYPE
|
|
SYNTAX CmrwFarMultiIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwFarMultiIfPortIndex, cmrwFarMultiIfLinkIndex, cmrwFarMultiIfInstanceIndex }
|
|
::= { cmrwFarMultiIfTable 1 }
|
|
|
|
CmrwFarMultiIfEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwFarMultiIfPortIndex INTEGER,
|
|
cmrwFarMultiIfLinkIndex INTEGER,
|
|
cmrwFarMultiIfInstanceIndex INTEGER,
|
|
cmrwFarMultiIfUEnabled INTEGER,
|
|
cmrwFarMultiIfVEnabled INTEGER
|
|
}
|
|
|
|
cmrwFarMultiIfPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwFarMultiIfEntry 1 }
|
|
|
|
cmrwFarMultiIfLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwFarMultiIfEntry 2 }
|
|
|
|
cmrwFarMultiIfInstanceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses one of several instances
|
|
and is used as index for the other elements in the Table.
|
|
Instances can be
|
|
- U interfaces 1,2,3,4...
|
|
- V interfaces A,B,C,D...
|
|
The numbering format is 1,2,3,4..."
|
|
::= { cmrwFarMultiIfEntry 3 }
|
|
|
|
cmrwFarMultiIfUEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether the U1,U2,U3,U4... interface is enabled or not.
|
|
1 Disabled Interface is disabled
|
|
2 Enabled Interface is enabled
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwFarMultiIfEntry 4 }
|
|
|
|
cmrwFarMultiIfVEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether the V_A,V_B,V_C,V_D... interface is enabled or not.
|
|
1 Disabled Interface is disabled
|
|
2 Enabled Interface is enabled
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwFarMultiIfEntry 5 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW Far L2Switch
|
|
--------------------------------------------------------------------------------
|
|
cmrwFarL2SwitchTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwFarL2SwitchEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwFar 11 }
|
|
|
|
cmrwFarL2SwitchEntry OBJECT-TYPE
|
|
SYNTAX CmrwFarL2SwitchEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwFarL2SwitchPortIndex, cmrwFarL2SwitchLinkIndex }
|
|
::= { cmrwFarL2SwitchTable 1 }
|
|
|
|
CmrwFarL2SwitchEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwFarL2SwitchPortIndex INTEGER,
|
|
cmrwFarL2SwitchLinkIndex INTEGER,
|
|
cmrwFarL2SwitchHugeFrames INTEGER,
|
|
cmrwFarL2SwitchAdaptiveFlowCtrl INTEGER,
|
|
cmrwFarL2SwitchFrameLengthCheck INTEGER
|
|
}
|
|
|
|
cmrwFarL2SwitchPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwFarL2SwitchEntry 1 }
|
|
|
|
cmrwFarL2SwitchLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwFarL2SwitchEntry 2 }
|
|
|
|
cmrwFarL2SwitchHugeFrames OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the Layer 2 Switch supports so-called Huge Frames
|
|
(frames longer than 1522 bytes).
|
|
1 Disabled Huge frames will be discarded
|
|
2 Enabled Huge frames allowed
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwFarL2SwitchEntry 3 }
|
|
|
|
cmrwFarL2SwitchAdaptiveFlowCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether adaptive flow control on the Layer 2 Switch and on the
|
|
HDLC bridge is enabled (to avoid packet loss) or not.
|
|
1 Disabled Disable adaptive flow control
|
|
2 Enabled Enable adaptive flow control
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwFarL2SwitchEntry 4 }
|
|
|
|
cmrwFarL2SwitchFrameLengthCheck OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether frame length check on the Layer 2 Switch is enabled or not.
|
|
1 Disabled Disable frame length check
|
|
2 Enabled Enable frame length check
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { cmrwFarL2SwitchEntry 5 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW far Mapping
|
|
--------------------------------------------------------------------------------
|
|
cmrwFarMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwFarMappingEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwFar 12 }
|
|
|
|
cmrwFarMappingEntry OBJECT-TYPE
|
|
SYNTAX CmrwFarMappingEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwFarMappingPortIndex, cmrwFarMappingLinkIndex }
|
|
::= { cmrwFarMappingTable 1 }
|
|
|
|
CmrwFarMappingEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwFarMappingPortIndex INTEGER,
|
|
cmrwFarMappingLinkIndex INTEGER,
|
|
cmrwFarMappingEnabled INTEGER,
|
|
cmrwFarMappingMixedOperation INTEGER,
|
|
cmrwFarMappingOmitSTS INTEGER,
|
|
cmrwFarMappingSTSPosition INTEGER,
|
|
cmrwFarMappingTxTs0 INTEGER
|
|
}
|
|
|
|
cmrwFarMappingPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwFarMappingEntry 1 }
|
|
|
|
cmrwFarMappingLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {cmrwFarMappingEntry 2 }
|
|
|
|
cmrwFarMappingEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether Mapping is enabled or disabled.
|
|
1 Disabled Mapping is disabled
|
|
2 Enabled Mapping is enabled
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarMappingEntry 3 }
|
|
|
|
cmrwFarMappingMixedOperation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether Mixed Operation (Data to Structured TDM) is enabled or disabled.
|
|
1 Disabled Mixed Operation is disabled
|
|
2 Enabled Mixed Operation is enabled
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarMappingEntry 4 }
|
|
|
|
cmrwFarMappingOmitSTS OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transmit(1),
|
|
omit(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether the Signalization Timeslot is actually being transmitted or just mapped, not transmitted.
|
|
1 Transmit STS is transmitted
|
|
2 Omit STS is mapped, but not transmitted
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarMappingEntry 5 }
|
|
|
|
cmrwFarMappingSTSPosition OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unchanged(1),
|
|
tsPos1(2),
|
|
tsPos2(3),
|
|
tsPos3(4),
|
|
tsPos4(5),
|
|
tsPos5(6),
|
|
tsPos6(7),
|
|
tsPos7(8),
|
|
tsPos8(9),
|
|
tsPos9(10),
|
|
tsPos10(11),
|
|
tsPos11(12),
|
|
tsPos12(13),
|
|
tsPos13(14),
|
|
tsPos14(15),
|
|
tsPos15(16),
|
|
tsPos16(17),
|
|
tsPos17(18),
|
|
tsPos18(19),
|
|
tsPos19(20),
|
|
tsPos20(21),
|
|
tsPos21(22),
|
|
tsPos22(23),
|
|
tsPos23(24),
|
|
tsPos24(25),
|
|
tsPos25(26),
|
|
tsPos26(27),
|
|
tsPos27(28),
|
|
tsPos28(29),
|
|
tsPos29(30),
|
|
tsPos30(31),
|
|
tsPos31(32),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the position of the Signalization Timeslot.
|
|
1 unchanged STS mapping is disabled
|
|
2 tsPos1 STS position: Timeslot 1
|
|
3 tsPos2 STS position: Timeslot 2
|
|
4 tsPos3 STS position: Timeslot 3
|
|
5 tsPos4 STS position: Timeslot 4
|
|
6 tsPos5 STS position: Timeslot 5
|
|
7 tsPos6 STS position: Timeslot 6
|
|
8 tsPos7 STS position: Timeslot 7
|
|
9 tsPos8 STS position: Timeslot 8
|
|
10 tsPos9 STS position: Timeslot 9
|
|
11 tsPos10 STS position: Timeslot 10
|
|
12 tsPos11 STS position: Timeslot 11
|
|
13 tsPos12 STS position: Timeslot 12
|
|
14 tsPos13 STS position: Timeslot 13
|
|
15 tsPos14 STS position: Timeslot 14
|
|
16 tsPos15 STS position: Timeslot 15
|
|
17 tsPos16 STS position: Timeslot 16
|
|
18 tsPos17 STS position: Timeslot 17
|
|
19 tsPos18 STS position: Timeslot 18
|
|
20 tsPos19 STS position: Timeslot 19
|
|
21 tsPos20 STS position: Timeslot 20
|
|
22 tsPos21 STS position: Timeslot 21
|
|
23 tsPos22 STS position: Timeslot 22
|
|
24 tsPos23 STS position: Timeslot 23
|
|
25 tsPos24 STS position: Timeslot 24
|
|
26 tsPos25 STS position: Timeslot 25
|
|
27 tsPos26 STS position: Timeslot 26
|
|
28 tsPos27 STS position: Timeslot 27
|
|
29 tsPos28 STS position: Timeslot 28
|
|
30 tsPos29 STS position: Timeslot 29
|
|
31 tsPos30 STS position: Timeslot 30
|
|
32 tsPos31 STS position: Timeslot 31
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarMappingEntry 6 }
|
|
|
|
cmrwFarMappingTxTs0 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether timeslot 0 is transmitted on the U interface.
|
|
1 Disabled TS0 is not transmitted
|
|
2 Enabled TS0 is transmitted
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarMappingEntry 7 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW Setup
|
|
--------------------------------------------------------------------------------
|
|
cmrwFarSetupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwFarSetupEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwFar 13 }
|
|
|
|
cmrwFarSetupEntry OBJECT-TYPE
|
|
SYNTAX CmrwFarSetupEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwFarSetupPortIndex, cmrwFarSetupLinkIndex }
|
|
::= { cmrwFarSetupTable 1 }
|
|
|
|
CmrwFarSetupEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwFarSetupPortIndex INTEGER,
|
|
cmrwFarSetupLinkIndex INTEGER,
|
|
cmrwFarSetupCardActivation OCTET STRING,
|
|
cmrwFarSetupCardActState OCTET STRING,
|
|
cmrwFarSetupIfAssignment OCTET STRING
|
|
}
|
|
|
|
cmrwFarSetupPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwFarSetupEntry 1 }
|
|
|
|
cmrwFarSetupLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwFarSetupEntry 2 }
|
|
|
|
cmrwFarSetupCardActivation OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(8))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the system activation for the systems A to H on the card.
|
|
Each byte consists of the following information for one system:
|
|
1 Deactivated The system is inactive
|
|
2 Activated The system is active
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarSetupEntry 3 }
|
|
|
|
cmrwFarSetupCardActState OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(8))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the system activation state for the systems A to H on the card .
|
|
Each byte consists of the following information for one system:
|
|
1 Current The system belongs to the currently managed line
|
|
2 Present The system does not belong to the currently managed line
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarSetupEntry 4 }
|
|
|
|
cmrwFarSetupIfAssignment OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the assignment of the (moveable) interfaces 1..4
|
|
to the systems A..D on the card .
|
|
Each byte consists of the following information for one interface:
|
|
1 systemA The interface is assigned to System A
|
|
2 systemB The interface is assigned to System B
|
|
3 systemC The interface is assigned to System C
|
|
4 systemD The interface is assigned to System D
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { cmrwFarSetupEntry 5 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW OMI Token
|
|
--------------------------------------------------------------------------------
|
|
cmrwOmiTokenTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwOmiTokenEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwOmi 1 }
|
|
|
|
cmrwOmiTokenEntry OBJECT-TYPE
|
|
SYNTAX CmrwOmiTokenEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwOmiTokenPortIndex }
|
|
::= { cmrwOmiTokenTable 1 }
|
|
|
|
CmrwOmiTokenEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwOmiTokenPortIndex INTEGER,
|
|
cmrwOmiTokenResId INTEGER,
|
|
cmrwOmiTokenTicket INTEGER,
|
|
cmrwOmiTokenSessionId INTEGER
|
|
}
|
|
|
|
cmrwOmiTokenPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwOmiTokenEntry 1 }
|
|
|
|
cmrwOmiTokenResId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
available(1),
|
|
lineint(2),
|
|
lct(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates who is in posession of the reservation token for this
|
|
device.
|
|
1 Available The token is free
|
|
2 Lineint The token is given to the LineIntegrator
|
|
3 Lct The token is given to the Local Craft Terminal (LCT)
|
|
254 unknown value
|
|
255 unsupported variable for the addressed device"
|
|
::= { cmrwOmiTokenEntry 2 }
|
|
|
|
cmrwOmiTokenTicket OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
token1(1),
|
|
token2(2),
|
|
token3(3),
|
|
token4(4),
|
|
token5(5),
|
|
token6(6),
|
|
token7(7),
|
|
token8(8),
|
|
token9(9),
|
|
token10(10),
|
|
notGranted(11),
|
|
lost(12),
|
|
notRequested(13),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Is used to request or refresh the token
|
|
device.
|
|
1-10 Token1-10 The token was granted/refreshed, the index helps to detect whether it has expried since last reading from this variable
|
|
11 NotGranted The token was not granted
|
|
12 Lost The token could not be refreshed
|
|
13 NotRequested The token has not been requested
|
|
254 unknown value
|
|
255 unsupported variable for the addressed device"
|
|
::= { cmrwOmiTokenEntry 7 }
|
|
|
|
cmrwOmiTokenSessionId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates which SNMP management is in posession of the reservation token for this
|
|
device.
|
|
0 Invalid The session value is invalid
|
|
65535 Unsupported unsupported variable for the addressed device"
|
|
::= { cmrwOmiTokenEntry 8 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW Omi Action
|
|
--------------------------------------------------------------------------------
|
|
cmrwOmiActionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwOmiActionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwOmi 6 }
|
|
|
|
cmrwOmiActionEntry OBJECT-TYPE
|
|
SYNTAX CmrwOmiActionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwOmiActionPortIndex }
|
|
::= { cmrwOmiActionTable 1 }
|
|
|
|
CmrwOmiActionEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwOmiActionPortIndex INTEGER,
|
|
cmrwOmiActionReboot INTEGER
|
|
}
|
|
|
|
cmrwOmiActionPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwOmiActionEntry 1 }
|
|
|
|
cmrwOmiActionReboot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
passive(1),
|
|
active(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Command to reboot device. The parameter specifies whether
|
|
the firmware in the active or passive bank shall be started.
|
|
1 Passive Reboot using the passive firmware
|
|
2 Active Reboot using the active firmware
|
|
|
|
If the parameter 'passive' is specified but the passive
|
|
firmware bank contains no valid code, the device reboots
|
|
using the active firmware."
|
|
::= { cmrwOmiActionEntry 2 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW Omi Config
|
|
--------------------------------------------------------------------------------
|
|
cmrwOmiConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwOmiConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwOmi 7 }
|
|
|
|
cmrwOmiConfigEntry OBJECT-TYPE
|
|
SYNTAX CmrwOmiConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwOmiConfigPortIndex }
|
|
::= { cmrwOmiConfigTable 1 }
|
|
|
|
CmrwOmiConfigEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwOmiConfigPortIndex INTEGER,
|
|
cmrwOmiConfigVirtSlotPolling INTEGER,
|
|
cmrwOmiNTPServer1 OCTET STRING,
|
|
cmrwOmiNTPServer2 OCTET STRING,
|
|
cmrwOmiSNTPClientMode INTEGER,
|
|
cmrwOmiSNTPLocalUDPPort INTEGER,
|
|
cmrwOmiDateTime INTEGER,
|
|
cmrwOmiNMS1PortConfig INTEGER,
|
|
cmrwOmiNMS1PortStatus INTEGER,
|
|
cmrwOmiNMS1PortAutoConfig OCTET STRING,
|
|
cmrwOmiNMS2PortConfig INTEGER,
|
|
cmrwOmiNMS2PortStatus INTEGER,
|
|
cmrwOmiNMS2PortAutoConfig OCTET STRING,
|
|
cmrwOmiNMS3PortConfig INTEGER,
|
|
cmrwOmiNMS3PortStatus INTEGER,
|
|
cmrwOmiNMS3PortAutoConfig OCTET STRING
|
|
}
|
|
|
|
cmrwOmiConfigPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwOmiConfigEntry 1 }
|
|
|
|
cmrwOmiConfigVirtSlotPolling OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Is used to enable/disable the polling of the virtual slots (0x80).
|
|
1 Disabled The polling of the virtual slots is disabled
|
|
2 Enabled The polling of the virtual slots is enabled"
|
|
::= { cmrwOmiConfigEntry 2 }
|
|
|
|
cmrwOmiNTPServer1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"NTP Server 1"
|
|
::= { cmrwOmiConfigEntry 3 }
|
|
|
|
cmrwOmiNTPServer2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"NTP Server 2"
|
|
::= { cmrwOmiConfigEntry 4 }
|
|
|
|
cmrwOmiSNTPClientMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unicast(1),
|
|
broadcast(2),
|
|
disable(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SNTP client mode:
|
|
1 UNICAST
|
|
2 BROADCAST
|
|
3 DISABLED
|
|
254 UNKNOWN
|
|
255 UNSUPPORTED
|
|
"
|
|
::= { cmrwOmiConfigEntry 5 }
|
|
|
|
cmrwOmiSNTPLocalUDPPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SNTP local UDP port 1..65535"
|
|
::= { cmrwOmiConfigEntry 6 }
|
|
|
|
cmrwOmiDateTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unix system date (seconds elapsed since 1970-01-01)"
|
|
::= { cmrwOmiConfigEntry 7 }
|
|
|
|
cmrwOmiNMS1PortConfig OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
full10Mbps(2),
|
|
half10Mbps(3),
|
|
full100Mbps(4),
|
|
half100Mbps(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"NMS port configuration.
|
|
1 AUTO
|
|
2 10 Mbps full duplex
|
|
3 10 Mbps half duplex
|
|
4 100 Mbps full duplex
|
|
5 100 Mbps half duplex
|
|
254 UNKNOWN
|
|
255 UNSUPPORTED
|
|
"
|
|
::= { cmrwOmiConfigEntry 8 }
|
|
|
|
cmrwOmiNMS1PortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
full10Mbps(2),
|
|
half10Mbps(3),
|
|
full100Mbps(4),
|
|
half100Mbps(5),
|
|
linkDown(6),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"NMS Port status.
|
|
1 AUTO
|
|
2 10 Mbps full duplex
|
|
3 10 Mbps half duplex
|
|
4 100 Mbps full duplex
|
|
5 100 Mbps half duplex
|
|
6 link down
|
|
254 UNKNOWN
|
|
255 UNSUPPORTED
|
|
"
|
|
::= { cmrwOmiConfigEntry 9 }
|
|
|
|
cmrwOmiNMS1PortAutoConfig OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"NMS port auto conf:
|
|
Bit fields: Advertised mode
|
|
Mode is coded as follows:
|
|
bit 0 if 1 full 10 Mbps
|
|
bit 1 if 1 full 100 Mbps
|
|
bit 2 if 1 half 10 Mbps
|
|
bit 3 if 1 half 100 Mbps
|
|
0xFE UNKNOWN
|
|
0xFF UNSUPPORTED
|
|
"
|
|
::= { cmrwOmiConfigEntry 10 }
|
|
|
|
cmrwOmiNMS2PortConfig OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
full10Mbps(2),
|
|
half10Mbps(3),
|
|
full100Mbps(4),
|
|
half100Mbps(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"NMS port configuration.
|
|
1 AUTO
|
|
2 10 Mbps full duplex
|
|
3 10 Mbps half duplex
|
|
4 100 Mbps full duplex
|
|
5 100 Mbps half duplex
|
|
254 UNKNOWN
|
|
255 UNSUPPORTED
|
|
"
|
|
::= { cmrwOmiConfigEntry 11}
|
|
|
|
cmrwOmiNMS2PortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
full10Mbps(2),
|
|
half10Mbps(3),
|
|
full100Mbps(4),
|
|
half100Mbps(5),
|
|
linkDown(6),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"NMS Port status.
|
|
1 AUTO
|
|
2 10 Mbps full duplex
|
|
3 10 Mbps half duplex
|
|
4 100 Mbps full duplex
|
|
5 100 Mbps half duplex
|
|
6 link down
|
|
254 UNKNOWN
|
|
255 UNSUPPORTED
|
|
"
|
|
::= { cmrwOmiConfigEntry 12 }
|
|
|
|
cmrwOmiNMS2PortAutoConfig OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"NMS port auto conf:
|
|
Bit fields: Advertised mode
|
|
Mode is coded as follows:
|
|
bit 0 if 1 full 10 Mbps
|
|
bit 1 if 1 full 100 Mbps
|
|
bit 2 if 1 half 10 Mbps
|
|
bit 3 if 1 half 100 Mbps
|
|
0xFE UNKNOWN
|
|
0xFF UNSUPPORTED
|
|
"
|
|
::= { cmrwOmiConfigEntry 13 }
|
|
|
|
cmrwOmiNMS3PortConfig OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
full10Mbps(2),
|
|
half10Mbps(3),
|
|
full100Mbps(4),
|
|
half100Mbps(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"NMS port configuration.
|
|
1 AUTO
|
|
2 10 Mbps full duplex
|
|
3 10 Mbps half duplex
|
|
4 100 Mbps full duplex
|
|
5 100 Mbps half duplex
|
|
254 UNKNOWN
|
|
255 UNSUPPORTED
|
|
"
|
|
::= { cmrwOmiConfigEntry 14 }
|
|
|
|
cmrwOmiNMS3PortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
full10Mbps(2),
|
|
half10Mbps(3),
|
|
full100Mbps(4),
|
|
half100Mbps(5),
|
|
linkDown(6),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"NMS Port status.
|
|
1 AUTO
|
|
2 10 Mbps full duplex
|
|
3 10 Mbps half duplex
|
|
4 100 Mbps full duplex
|
|
5 100 Mbps half duplex
|
|
6 link down
|
|
254 UNKNOWN
|
|
255 UNSUPPORTED
|
|
"
|
|
::= { cmrwOmiConfigEntry 15 }
|
|
|
|
cmrwOmiNMS3PortAutoConfig OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"NMS port auto conf:
|
|
Bit fields: Advertised mode
|
|
Mode is coded as follows:
|
|
bit 0 if 1 full 10 Mbps
|
|
bit 1 if 1 full 100 Mbps
|
|
bit 2 if 1 half 10 Mbps
|
|
bit 3 if 1 half 100 Mbps
|
|
0xFE UNKNOWN
|
|
0xFF UNSUPPORTED
|
|
"
|
|
::= { cmrwOmiConfigEntry 16 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CM-RW Sru Action
|
|
--------------------------------------------------------------------------------
|
|
cmrwSruActionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmrwSruActionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { cmrwSru 1 }
|
|
|
|
cmrwSruActionEntry OBJECT-TYPE
|
|
SYNTAX CmrwSruActionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { cmrwSruActionPortIndex, cmrwSruActionLinkIndex, cmrwSruActionRegIndex }
|
|
::= { cmrwSruActionTable 1 }
|
|
|
|
CmrwSruActionEntry ::=
|
|
SEQUENCE
|
|
{
|
|
cmrwSruActionPortIndex INTEGER,
|
|
cmrwSruActionLinkIndex INTEGER,
|
|
cmrwSruActionRegIndex INTEGER,
|
|
cmrwSruActionReboot INTEGER
|
|
}
|
|
|
|
cmrwSruActionPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwSruActionEntry 1 }
|
|
|
|
cmrwSruActionLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { cmrwSruActionEntry 2 }
|
|
|
|
cmrwSruActionRegIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
reg11(3),
|
|
reg12(4),
|
|
reg21(5),
|
|
reg22(6),
|
|
reg31(7),
|
|
reg32(8),
|
|
reg41(9),
|
|
reg42(10),
|
|
reg51(11),
|
|
reg52(12),
|
|
reg61(13),
|
|
reg62(14),
|
|
reg71(15),
|
|
reg72(16),
|
|
reg81(17),
|
|
reg82(18),
|
|
reg13(19),
|
|
reg14(20),
|
|
reg23(21),
|
|
reg24(22),
|
|
reg33(23),
|
|
reg34(24),
|
|
reg43(25),
|
|
reg44(26),
|
|
reg53(27),
|
|
reg54(28),
|
|
reg63(29),
|
|
reg64(30),
|
|
reg73(31),
|
|
reg74(32),
|
|
reg83(33),
|
|
reg84(34)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the regenerator device and is
|
|
used as index for the other elements in the Table"
|
|
::= { cmrwSruActionEntry 3 }
|
|
|
|
cmrwSruActionReboot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
passive(1),
|
|
active(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Command to reboot device. The parameter specifies whether
|
|
the firmware in the active or passive bank shall be started.
|
|
1 Passive Reboot using the passive firmware
|
|
2 Active Reboot using the active firmware
|
|
|
|
If the parameter 'passive' is specified but the passive
|
|
firmware bank contains no valid code, the device reboots
|
|
using the active firmware."
|
|
::= { cmrwSruActionEntry 4 }
|
|
|
|
--==============================================================================
|
|
--==============================================================================
|
|
--
|
|
-- FM-RO
|
|
--
|
|
--==============================================================================
|
|
--==============================================================================
|
|
fmro OBJECT IDENTIFIER ::= { linksVers3 3 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RO OMI
|
|
--------------------------------------------------------------------------------
|
|
fmroOmiTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmroOmiEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmro 1 }
|
|
|
|
fmroOmiEntry OBJECT-TYPE
|
|
SYNTAX FmroOmiEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmroOmiPortIndex }
|
|
::= { fmroOmiTable 1 }
|
|
|
|
FmroOmiEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmroOmiPortIndex INTEGER,
|
|
fmroOmiBattery1 INTEGER,
|
|
fmroOmiBattery2 INTEGER,
|
|
fmroOmiSaw INTEGER,
|
|
fmroOmiAuxMcuPower INTEGER,
|
|
fmroOmiExtInput1 INTEGER,
|
|
fmroOmiExtInput2 INTEGER,
|
|
fmroOmiExtInput3 INTEGER,
|
|
fmroOmiExtInput4 INTEGER,
|
|
fmroOmiNMSInterface1 INTEGER,
|
|
fmroOmiNMSInterface2 INTEGER,
|
|
fmroOmiNMSInterface3 INTEGER,
|
|
fmroOmiFEInterface1 INTEGER,
|
|
fmroOmiFEInterface2 INTEGER,
|
|
fmroOmiFEInterface3 INTEGER,
|
|
fmroOmiFEInterface4 INTEGER,
|
|
fmroOmiFEInterface5 INTEGER,
|
|
fmroOmiFEInterface6 INTEGER,
|
|
fmroOmiFEInterface7 INTEGER,
|
|
fmroOmiFEInterface8 INTEGER,
|
|
fmroOmiFEInterface9 INTEGER,
|
|
fmroOmiFEInterface10 INTEGER,
|
|
fmroOmiFEInterface11 INTEGER,
|
|
fmroOmiFEInterface12 INTEGER,
|
|
fmroOmiFEInterface13 INTEGER,
|
|
fmroOmiFEInterface14 INTEGER,
|
|
fmroOmiFEInterface15 INTEGER,
|
|
fmroOmiFEInterface16 INTEGER,
|
|
fmroOmiGBEUplink1 INTEGER,
|
|
fmroOmiGBEUplink2 INTEGER,
|
|
fmroOmiSFPLaser1 INTEGER,
|
|
fmroOmiSFPLaser2 INTEGER,
|
|
fmroOmiSFPInterface1 INTEGER,
|
|
fmroOmiSFPInterface2 INTEGER
|
|
}
|
|
|
|
fmroOmiPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroOmiEntry 1 }
|
|
|
|
fmroOmiBattery1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
batteryAlarm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Battery alarm of the OMI card.
|
|
1 None No Alarm
|
|
2 BatteryAlarm Power failure on Battery 1
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 2 }
|
|
|
|
fmroOmiBattery2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
batteryAlarm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Battery alarm of the OMI card.
|
|
1 None No Alarm
|
|
2 BatteryAlarm Power failure on Battery 2
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 3 }
|
|
|
|
fmroOmiSaw OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm summary of the OMI card.
|
|
Bit 0 1 Urgent Alarm
|
|
Bit 1 2 Non-urgent Alarm
|
|
Bit 2 4 AIS (Alarm Indication Signal)
|
|
Bit 6 64 unknown
|
|
Bit 7 128 unsupported"
|
|
::= { fmroOmiEntry 4 }
|
|
|
|
fmroOmiAuxMcuPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
batteryAlarm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Battery alarm of the OMI card.
|
|
1 No Alarm
|
|
2 Power failure on Auxiliary MCU battery
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 5 }
|
|
|
|
fmroOmiExtInput1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
inputAlarm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"External alarm 1 of the MCU card.
|
|
1 No Alarm
|
|
2 External Alarm 1
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 6 }
|
|
|
|
fmroOmiExtInput2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
inputAlarm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"External alarm 2 of the MCU card.
|
|
1 No Alarm
|
|
2 External Alarm 2
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 7 }
|
|
|
|
fmroOmiExtInput3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
inputAlarm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"External alarm 3 of the MCU card.
|
|
1 No Alarm
|
|
2 External Alarm 3
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 8 }
|
|
|
|
fmroOmiExtInput4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
inputAlarm(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"External alarm of the MCU card.
|
|
1 No Alarm
|
|
2 External Alarm 4
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 9 }
|
|
|
|
fmroOmiNMSInterface1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"NMS Interface 1 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 10 }
|
|
|
|
fmroOmiNMSInterface2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"NMS Interface 2 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 11 }
|
|
|
|
fmroOmiNMSInterface3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"NMS Interface 3 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 12 }
|
|
|
|
fmroOmiFEInterface1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet Interface 1 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 13 }
|
|
|
|
fmroOmiFEInterface2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet Interface 2 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 14 }
|
|
|
|
fmroOmiFEInterface3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet Interface 3 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 15 }
|
|
|
|
fmroOmiFEInterface4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet Interface 4 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 16 }
|
|
|
|
fmroOmiFEInterface5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet Interface 5 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 17 }
|
|
|
|
fmroOmiFEInterface6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet Interface 6 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 18 }
|
|
|
|
fmroOmiFEInterface7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet Interface 7 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 19 }
|
|
|
|
fmroOmiFEInterface8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet Interface 8 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 20 }
|
|
|
|
fmroOmiFEInterface9 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet Interface 9 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 21 }
|
|
|
|
fmroOmiFEInterface10 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet Interface 10 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 22 }
|
|
|
|
fmroOmiFEInterface11 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet Interface 11 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 23 }
|
|
|
|
fmroOmiFEInterface12 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet Interface 12 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 24 }
|
|
|
|
fmroOmiFEInterface13 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet Interface 13 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 25 }
|
|
|
|
fmroOmiFEInterface14 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet Interface 14 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 26 }
|
|
|
|
fmroOmiFEInterface15 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet Interface 15 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 27 }
|
|
|
|
fmroOmiFEInterface16 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet Interface 16 alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 28 }
|
|
|
|
fmroOmiGBEUplink1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"GBE 1 link down alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 29 }
|
|
|
|
fmroOmiGBEUplink2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"GBE 2 link down alarm of the MCU card.
|
|
1 No Alarm
|
|
24 LinkDown No Link Detected
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 30 }
|
|
|
|
fmroOmiSFPLaser1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP 1 laser alarm of the MCU card.
|
|
1 No Alarm
|
|
10 Alarm Alarm present
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 31 }
|
|
|
|
fmroOmiSFPLaser2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP 2 laser alarm of the MCU card.
|
|
1 No Alarm
|
|
10 Alarm Alarm present
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 32 }
|
|
|
|
fmroOmiSFPInterface1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
los(9),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP 1 interface alarm of the MCU card
|
|
1 No Alarm
|
|
9 LOS Loss of Signal
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 33 }
|
|
|
|
fmroOmiSFPInterface2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
los(9),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP 2 interface alarm of the MCU card.
|
|
1 No Alarm
|
|
9 LOS Loss of Signal
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroOmiEntry 34 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RO Local HTU
|
|
--------------------------------------------------------------------------------
|
|
fmroHtuLocalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmroHtuLocalEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmro 2 }
|
|
|
|
fmroHtuLocalEntry OBJECT-TYPE
|
|
SYNTAX FmroHtuLocalEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmroHtuLocalPortIndex, fmroHtuLocalLinkIndex }
|
|
::= { fmroHtuLocalTable 1 }
|
|
|
|
FmroHtuLocalEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmroHtuLocalPortIndex INTEGER,
|
|
fmroHtuLocalLinkIndex INTEGER,
|
|
fmroHtuLocalU1 INTEGER,
|
|
fmroHtuLocalU2 INTEGER,
|
|
fmroHtuLocalU INTEGER,
|
|
fmroHtuLocalT INTEGER,
|
|
fmroHtuLocalDC INTEGER,
|
|
fmroHtuLocalDN INTEGER,
|
|
fmroHtuLocalEquipment INTEGER,
|
|
fmroHtuLocalLosD INTEGER,
|
|
fmroHtuLocalT3In INTEGER,
|
|
fmroHtuLocalRps INTEGER,
|
|
fmroHtuLocalRta INTEGER,
|
|
fmroHtuLocalPowerfail INTEGER,
|
|
fmroHtuLocalT3Out INTEGER,
|
|
fmroHtuLocalLaser INTEGER,
|
|
fmroHtuLocalAlarmSummary INTEGER,
|
|
fmroHtuLocalPowerfailCpe INTEGER,
|
|
fmroHtuLocalU3 INTEGER,
|
|
fmroHtuLocalU4 INTEGER,
|
|
fmroHtuLocalRps2 INTEGER,
|
|
fmroHtuLocalRps3 INTEGER,
|
|
fmroHtuLocalRps4 INTEGER,
|
|
fmroHtuLocalVA INTEGER,
|
|
fmroHtuLocalVB INTEGER,
|
|
fmroHtuLocalVC INTEGER,
|
|
fmroHtuLocalVD INTEGER,
|
|
fmroHtuLocalMcsCha INTEGER,
|
|
fmroHtuLocalMcsChb INTEGER,
|
|
fmroHtuLocalMcsChc INTEGER,
|
|
fmroHtuLocalMcsChd INTEGER,
|
|
fmroHtuLocalMcsRemCha INTEGER,
|
|
fmroHtuLocalMcsRemChb INTEGER,
|
|
fmroHtuLocalMcsRemChc INTEGER,
|
|
fmroHtuLocalMcsRemChd INTEGER,
|
|
fmroHtuLocalMcs INTEGER,
|
|
fmroHtuLocalL2SwitchWanRx INTEGER,
|
|
fmroHtuLocalL2SwitchWanTx INTEGER,
|
|
fmroHtuLocalL2SwitchLanPort1 INTEGER,
|
|
fmroHtuLocalL2SwitchLanPort2 INTEGER,
|
|
fmroHtuLocalL2SwitchLanPort3 INTEGER,
|
|
fmroHtuLocalL2SwitchLanPort4 INTEGER,
|
|
fmroHtuLocalL2SwitchBPLPort1 INTEGER,
|
|
fmroHtuLocalUo INTEGER,
|
|
fmroHtuLocalUo1 INTEGER,
|
|
fmroHtuLocalUo2 INTEGER,
|
|
fmroHtuLocalUA INTEGER,
|
|
fmroHtuLocalUB INTEGER,
|
|
fmroHtuLocalUC INTEGER,
|
|
fmroHtuLocalUD INTEGER,
|
|
fmroHtuLocalLosDB INTEGER,
|
|
fmroHtuLocalLosDC INTEGER,
|
|
fmroHtuLocalLosDD INTEGER,
|
|
fmroHtuLocalSFP1 INTEGER,
|
|
fmroHtuLocalSFP2 INTEGER
|
|
}
|
|
|
|
fmroHtuLocalPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroHtuLocalEntry 1 }
|
|
|
|
fmroHtuLocalLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroHtuLocalEntry 2 }
|
|
|
|
fmroHtuLocalU1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HDSL Error on Path 1
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 3 }
|
|
|
|
fmroHtuLocalU2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HDSL Error on Path 2
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 4 }
|
|
|
|
fmroHtuLocalU OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
hpo(2),
|
|
fpo(3),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
bwNotAvail(18),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error in 2MB Signal on HDSL Path
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
10 RAI Remote Alarm Indication
|
|
18 BwNotAvail Bandwidth not available
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 5 }
|
|
|
|
fmroHtuLocalT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the G.703 Interface
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 6 }
|
|
|
|
fmroHtuLocalDC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
loa(6),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the Data interface (Transmit signal)
|
|
1 None No Alarm
|
|
6 LOA Loss of Activity
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 7 }
|
|
|
|
fmroHtuLocalDN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
loa(6),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the Data interface (Receive signal)
|
|
1 None No Alarm
|
|
6 LOA Loss of Activity
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 8 }
|
|
|
|
fmroHtuLocalEquipment OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
xfw(25),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Equipment Alarm
|
|
1 None No Alarm
|
|
10 Alarm Alarm present
|
|
25 XFW Firmware Mismatch
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 9 }
|
|
|
|
fmroHtuLocalLosD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"LOS-D Error State
|
|
1 None No Alarm
|
|
10 Alarm Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 10 }
|
|
|
|
fmroHtuLocalT3In OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
los(9),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Loss of Clock on T3In
|
|
1 None No Alarm
|
|
9 LOS Loss of Clock Signal an T3In
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 11 }
|
|
|
|
fmroHtuLocalRps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ucr12(12),
|
|
ucr1(13),
|
|
ucr2(14),
|
|
ovr(15),
|
|
nosym(16),
|
|
defect(17),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote Power Supply Error State
|
|
1 None No Alarm
|
|
12 UCR12 Undercurrent on HDSL Path 1 and 2
|
|
13 UCR1 Undercurrent on HDSL Path 1
|
|
14 UCR2 Undercurrent on HDSL Path 2
|
|
15 OVR Overload
|
|
16 NOSYM Unsymetrical Load
|
|
17 DEFECT Defect on Module
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 12 }
|
|
|
|
fmroHtuLocalRta OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote Terminal Alarm Error State
|
|
1 None No Alarm
|
|
10 Alarm Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 13 }
|
|
|
|
fmroHtuLocalPowerfail OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote Device Powerfailure Alarm. If this alarm occurs the
|
|
remote device has lost all power and cannot be reached any
|
|
longer.
|
|
1 None No Alarm
|
|
10 Alarm Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 14 }
|
|
|
|
fmroHtuLocalT3Out OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
los(9),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"No Clock Signal available for T3Out
|
|
1 None No Alarm
|
|
9 LOS Loss of Clock Signal on T3Out
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 15 }
|
|
|
|
fmroHtuLocalLaser OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Laser aging alarm
|
|
1 None No Alarm
|
|
10 Alarm Laser reaching critical age
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 16 }
|
|
|
|
fmroHtuLocalAlarmSummary OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the alarm summary of the link. This value is bit coded:
|
|
Bit Value
|
|
0 1 UA Urgent alarm
|
|
1 2 NUA Non urgent alarm
|
|
2 4 AIS Alarm indication signal
|
|
|
|
A value of 0 means no alarm"
|
|
::= { fmroHtuLocalEntry 17 }
|
|
|
|
fmroHtuLocalPowerfailCpe OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote Device Local Power Loss Alarm. If this Alarm
|
|
is active, the device has lost its local power supply
|
|
but is still powered over the transmission line (using
|
|
a remote power supply (RPS).
|
|
1 None No Alarm
|
|
10 Alarm Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 18 }
|
|
|
|
fmroHtuLocalU3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"xDSL Error on Path 3
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 19 }
|
|
|
|
fmroHtuLocalU4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"xDSL Error on Path 4
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 20 }
|
|
|
|
fmroHtuLocalRps2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ucr1(13),
|
|
ovr(15),
|
|
nosym(16),
|
|
defect(17),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote Power Supply Error State on Path 2
|
|
1 None No Alarm
|
|
13 UCR1 Undercurrent on current Path
|
|
15 OVR Overload
|
|
16 NOSYM Unsymetrical Load
|
|
17 DEFECT Defect on Module
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 21 }
|
|
|
|
fmroHtuLocalRps3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ucr1(13),
|
|
ovr(15),
|
|
nosym(16),
|
|
defect(17),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote Power Supply Error State on Path 3
|
|
1 None No Alarm
|
|
13 UCR1 Undercurrent on current Path
|
|
15 OVR Overload
|
|
16 NOSYM Unsymetrical Load
|
|
17 DEFECT Defect on Module
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 22 }
|
|
|
|
fmroHtuLocalRps4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ucr1(13),
|
|
ovr(15),
|
|
nosym(16),
|
|
defect(17),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote Power Supply Error State on Path 4
|
|
1 None No Alarm
|
|
13 UCR1 Undercurrent on current Path
|
|
15 OVR Overload
|
|
16 NOSYM Unsymetrical Load
|
|
17 DEFECT Defect on Module
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 23 }
|
|
|
|
fmroHtuLocalVA OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the G.703 Interface
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 24 }
|
|
|
|
fmroHtuLocalVB OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the G.703 Interface
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 25 }
|
|
|
|
fmroHtuLocalVC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the G.703 Interface
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 26 }
|
|
|
|
fmroHtuLocalVD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the G.703 Interface
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 27 }
|
|
|
|
fmroHtuLocalMcsCha OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
lom(21),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the MCS Channel a
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
21 LOM Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 28 }
|
|
|
|
fmroHtuLocalMcsChb OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
lom(21),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the MCS Channel b
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
21 LOM Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 29 }
|
|
|
|
fmroHtuLocalMcsChc OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
lom(21),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the MCS Channel c
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
21 LOM Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 30 }
|
|
|
|
fmroHtuLocalMcsChd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
lom(21),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the MCS Channel d
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
21 LOM Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 31 }
|
|
|
|
fmroHtuLocalMcsRemCha OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
lom(21),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the MCS Remote Channel a
|
|
1 None No Alarm
|
|
21 LOM Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 32 }
|
|
|
|
fmroHtuLocalMcsRemChb OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
lom(21),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the MCS Remote Channel b
|
|
1 None No Alarm
|
|
21 LOM Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 33 }
|
|
|
|
fmroHtuLocalMcsRemChc OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
lom(21),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the MCS Remote Channel c
|
|
1 None No Alarm
|
|
21 LOM Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 34 }
|
|
|
|
fmroHtuLocalMcsRemChd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
lom(21),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the MCS Remote Channel d
|
|
1 None No Alarm
|
|
21 LOM Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 35 }
|
|
|
|
fmroHtuLocalMcs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
lom(21),
|
|
plom(22),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the entire MCS System
|
|
1 None No Alarm
|
|
21 LOM Loss Of MCS sync
|
|
22 PLOM Partial Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 36 }
|
|
|
|
fmroHtuLocalL2SwitchWanRx OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
loa(6),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the L2Switch WAN interface (Receive signal)
|
|
1 None No Alarm
|
|
6 LOA Loss Of Activity
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 37 }
|
|
|
|
fmroHtuLocalL2SwitchWanTx OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
loa(6),
|
|
mir(23),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the L2Switch WAN interface (Transmit signal)
|
|
1 None No Alarm
|
|
6 LOA Loss Of Activity
|
|
23 MIR Maximum Information Rate
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 38 }
|
|
|
|
fmroHtuLocalL2SwitchLanPort1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
lfp(27),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the L2Switch LAN Port 1
|
|
1 None No Alarm
|
|
24 LinkDown No Link Detected
|
|
27 LFP Link Failure Propagation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 39 }
|
|
|
|
fmroHtuLocalL2SwitchLanPort2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
lfp(27),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the L2Switch LAN Port 2
|
|
1 None No Alarm
|
|
24 LinkDown No Link Detected
|
|
27 LFP Link Failure Propagation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 40 }
|
|
|
|
fmroHtuLocalL2SwitchLanPort3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
lfp(27),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the L2Switch LAN Port 3
|
|
1 None No Alarm
|
|
24 LinkDown No Link Detected
|
|
27 LFP Link Failure Propagation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 41 }
|
|
|
|
fmroHtuLocalL2SwitchLanPort4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
lfp(27),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the L2Switch LAN Port 4
|
|
1 None No Alarm
|
|
24 LinkDown No Link Detected
|
|
27 LFP Link Failure Propagation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 42 }
|
|
|
|
fmroHtuLocalL2SwitchBPLPort1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
lfp(27),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the L2Switch Backplane Port 1
|
|
1 None No Alarm
|
|
24 LinkDown No Link Detected
|
|
27 LFP Link Failure Propagation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 43 }
|
|
|
|
fmroHtuLocalUo OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
los(9),
|
|
failUo1(28),
|
|
failUo2(29),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the optical link
|
|
1 None No Alarm
|
|
9 LOS Loss of Signal
|
|
28 FAIL_UO1 Line protection fail on Uo1
|
|
29 FAIL_UO2 Line protection fail on Uo2
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 44 }
|
|
|
|
fmroHtuLocalUo1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on first optical interface
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 45 }
|
|
|
|
fmroHtuLocalUo2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on second optical interface
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 46 }
|
|
|
|
fmroHtuLocalUA OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error in 2MB Signal (Framer A) on transmission side
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 47 }
|
|
|
|
fmroHtuLocalUB OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error in 2MB Signal (Framer B) on transmission side
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 48 }
|
|
|
|
fmroHtuLocalUC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error in 2MB Signal (Framer C) on transmission side
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 49 }
|
|
|
|
fmroHtuLocalUD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error in 2MB Signal (Framer D) on transmission side
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 50 }
|
|
|
|
fmroHtuLocalLosDB OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"LOS-D (Framer B) Error State
|
|
1 None No Alarm
|
|
10 Alarm Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 51 }
|
|
|
|
fmroHtuLocalLosDC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"LOS-D (Framer C) Error State
|
|
1 None No Alarm
|
|
10 Alarm Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 52 }
|
|
|
|
fmroHtuLocalLosDD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"LOS-D (Framer D) Error State
|
|
1 None No Alarm
|
|
10 Alarm Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 53 }
|
|
|
|
fmroHtuLocalSFP1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
txfault(30),
|
|
invalid(31),
|
|
missing(32),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on first SFP modul
|
|
1 None No Alarm
|
|
30 Tx fault Transmit laser fault
|
|
31 Invalid Invalid SFP modul equipped
|
|
32 Missing No SFP modul equipped
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 54 }
|
|
|
|
fmroHtuLocalSFP2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
txfault(30),
|
|
invalid(31),
|
|
missing(32),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on second SFP modul
|
|
1 None No Alarm
|
|
30 Tx fault Transmit laser fault
|
|
31 Invalid Invalid SFP modul equipped
|
|
32 Missing No SFP modul equipped
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuLocalEntry 55 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RO Far HTU
|
|
--------------------------------------------------------------------------------
|
|
fmroHtuFarTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmroHtuFarEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmro 3 }
|
|
|
|
fmroHtuFarEntry OBJECT-TYPE
|
|
SYNTAX FmroHtuFarEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmroHtuFarPortIndex, fmroHtuFarLinkIndex }
|
|
::= { fmroHtuFarTable 1 }
|
|
|
|
FmroHtuFarEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmroHtuFarPortIndex INTEGER,
|
|
fmroHtuFarLinkIndex INTEGER,
|
|
fmroHtuFarU1 INTEGER,
|
|
fmroHtuFarU2 INTEGER,
|
|
fmroHtuFarU INTEGER,
|
|
fmroHtuFarT INTEGER,
|
|
fmroHtuFarDC INTEGER,
|
|
fmroHtuFarDN INTEGER,
|
|
fmroHtuFarEquipment INTEGER,
|
|
fmroHtuFarLosD INTEGER,
|
|
fmroHtuFarT3In INTEGER,
|
|
fmroHtuFarRps INTEGER,
|
|
fmroHtuFarRta INTEGER,
|
|
fmroHtuFarPowerfail INTEGER,
|
|
fmroHtuFarT3Out INTEGER,
|
|
fmroHtuFarLaser INTEGER,
|
|
fmroHtuFarPowerfailCpe INTEGER,
|
|
fmroHtuFarU3 INTEGER,
|
|
fmroHtuFarU4 INTEGER,
|
|
fmroHtuFarRps2 INTEGER,
|
|
fmroHtuFarRps3 INTEGER,
|
|
fmroHtuFarRps4 INTEGER,
|
|
fmroHtuFarVSlave INTEGER,
|
|
fmroHtuFarTSlave INTEGER,
|
|
fmroHtuFarDCSlave INTEGER,
|
|
fmroHtuFarDNSlave INTEGER,
|
|
fmroHtuFarVA INTEGER,
|
|
fmroHtuFarVB INTEGER,
|
|
fmroHtuFarVC INTEGER,
|
|
fmroHtuFarVD INTEGER,
|
|
fmroHtuFarMcsCha INTEGER,
|
|
fmroHtuFarMcsChb INTEGER,
|
|
fmroHtuFarMcsChc INTEGER,
|
|
fmroHtuFarMcsChd INTEGER,
|
|
fmroHtuFarMcsRemCha INTEGER,
|
|
fmroHtuFarMcsRemChb INTEGER,
|
|
fmroHtuFarMcsRemChc INTEGER,
|
|
fmroHtuFarMcsRemChd INTEGER,
|
|
fmroHtuFarMcs INTEGER,
|
|
fmroHtuFarL2SwitchWanRx INTEGER,
|
|
fmroHtuFarL2SwitchWanTx INTEGER,
|
|
fmroHtuFarL2SwitchLanPort1 INTEGER,
|
|
fmroHtuFarL2SwitchLanPort2 INTEGER,
|
|
fmroHtuFarL2SwitchLanPort3 INTEGER,
|
|
fmroHtuFarL2SwitchLanPort4 INTEGER,
|
|
fmroHtuFarL2SwitchBPLPort1 INTEGER,
|
|
fmroHtuFarUo INTEGER,
|
|
fmroHtuFarUo1 INTEGER,
|
|
fmroHtuFarUo2 INTEGER,
|
|
fmroHtuFarUA INTEGER,
|
|
fmroHtuFarUB INTEGER,
|
|
fmroHtuFarUC INTEGER,
|
|
fmroHtuFarUD INTEGER,
|
|
fmroHtuFarLosDB INTEGER,
|
|
fmroHtuFarLosDC INTEGER,
|
|
fmroHtuFarLosDD INTEGER,
|
|
fmroHtuFarSFP1 INTEGER,
|
|
fmroHtuFarSFP2 INTEGER
|
|
}
|
|
|
|
fmroHtuFarPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroHtuFarEntry 1 }
|
|
|
|
fmroHtuFarLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroHtuFarEntry 2 }
|
|
|
|
fmroHtuFarU1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HDSL Error on Path 1
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 3 }
|
|
|
|
fmroHtuFarU2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"HDSL Error on Path 2
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 4 }
|
|
|
|
fmroHtuFarU OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
hpo(2),
|
|
fpo(3),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
bwNotAvail(18),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error in 2MB Signal on HDSL Path
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
18 BwNotAvail Bandwidth not available
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 5 }
|
|
|
|
fmroHtuFarT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the G.703 Interface
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 6 }
|
|
|
|
fmroHtuFarDC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
loa(6),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the Data interface (Transmit signal)
|
|
1 None No Alarm
|
|
6 LOA Loss of Activity
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 7 }
|
|
|
|
fmroHtuFarDN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
loa(6),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the Data interface (Receive signal)
|
|
1 None No Alarm
|
|
6 LOA Loss of Activity
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 8 }
|
|
|
|
fmroHtuFarEquipment OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Equipment Alarm
|
|
1 None No Alarm
|
|
10 Alarm Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 9 }
|
|
|
|
fmroHtuFarLosD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"LOS-D Error State
|
|
1 None No Alarm
|
|
10 Alarm Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 10 }
|
|
|
|
fmroHtuFarT3In OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
los(9),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Loss of Clock on T3In
|
|
1 None No Alarm
|
|
9 LOS Loss of Clock Signal on T3In
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 11 }
|
|
|
|
fmroHtuFarRps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ucr12(12),
|
|
ucr1(13),
|
|
ucr2(14),
|
|
ovr(15),
|
|
nosym(16),
|
|
defect(17),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote Power Supply Error State
|
|
1 None No Alarm
|
|
12 UCR12 Undercurrent on HDSL Path 1 and 2
|
|
13 UCR1 Undercurrent on HDSL Path 1
|
|
14 UCR2 Undercurrent on HDSL Path 2
|
|
15 OVR Overload
|
|
16 NOSYM Unsymetrical Load
|
|
17 DEFECT Defect on Module
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 12 }
|
|
|
|
fmroHtuFarRta OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote Terminal Alarm Error State
|
|
1 None No Alarm
|
|
10 Alarm Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 13 }
|
|
|
|
fmroHtuFarPowerfail OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote Device Powerfailure Alarm
|
|
1 None No Alarm
|
|
10 Alarm Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 14 }
|
|
|
|
fmroHtuFarT3Out OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
los(9),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"No Clock Signal available for T3Out
|
|
1 None No Alarm
|
|
9 LOS Loss of Clock Signal on T3Out
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 15 }
|
|
|
|
fmroHtuFarLaser OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Laser aging alarm
|
|
1 None No Alarm
|
|
10 Alarm Laser reaching critcal age
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 16 }
|
|
|
|
fmroHtuFarPowerfailCpe OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote Device Local Power Loss Alarm. If this Alarm
|
|
is active, the device has lost its local power supply
|
|
but is still powered over the transmission line (using
|
|
a remote power supply (RPS).
|
|
1 None No Alarm
|
|
10 Alarm Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 17 }
|
|
|
|
fmroHtuFarU3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"xDSL Error on Path 3
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 18 }
|
|
|
|
fmroHtuFarU4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"xDSL Error on Path 4
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 19 }
|
|
|
|
fmroHtuFarRps2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ucr1(13),
|
|
ovr(15),
|
|
nosym(16),
|
|
defect(17),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote Power Supply Error State on Path 2
|
|
1 None No Alarm
|
|
13 UCR1 Undercurrent on current Path
|
|
15 OVR Overload
|
|
16 NOSYM Unsymetrical Load
|
|
17 DEFECT Defect on Module
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 20 }
|
|
|
|
fmroHtuFarRps3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ucr1(13),
|
|
ovr(15),
|
|
nosym(16),
|
|
defect(17),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote Power Supply Error State on Path 3
|
|
1 None No Alarm
|
|
13 UCR1 Undercurrent on current Path
|
|
15 OVR Overload
|
|
16 NOSYM Unsymetrical Load
|
|
17 DEFECT Defect on Module
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 21 }
|
|
|
|
fmroHtuFarRps4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ucr1(13),
|
|
ovr(15),
|
|
nosym(16),
|
|
defect(17),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote Power Supply Error State on Path 4
|
|
1 None No Alarm
|
|
13 UCR1 Undercurrent on current Path
|
|
15 OVR Overload
|
|
16 NOSYM Unsymetrical Load
|
|
17 DEFECT Defect on Module
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 22 }
|
|
|
|
fmroHtuFarVSlave OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
nsp(20),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the V-Interface on the slave device
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
10 RAI Remote Alarm Indication
|
|
20 NSP No Slave Present (GTU with slave support)
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 23 }
|
|
|
|
fmroHtuFarTSlave OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the T-Interface on the slave device
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 24 }
|
|
|
|
fmroHtuFarDCSlave OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
loa(6),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the Data interface (Transmit signal) on the slave device
|
|
1 None No Alarm
|
|
6 LOA Loss of Activity
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 25 }
|
|
|
|
fmroHtuFarDNSlave OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
loa(6),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the Data interface (Receive signal) on the slave device
|
|
1 None No Alarm
|
|
6 LOA Loss of Activity
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 26 }
|
|
|
|
fmroHtuFarVA OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the G.703 Interface
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 27 }
|
|
|
|
fmroHtuFarVB OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the G.703 Interface
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 28 }
|
|
|
|
fmroHtuFarVC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the G.703 Interface
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 29 }
|
|
|
|
fmroHtuFarVD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the G.703 Interface
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 30 }
|
|
|
|
fmroHtuFarMcsCha OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
lom(21),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the MCS Channel a
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
21 LOM Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 31 }
|
|
|
|
fmroHtuFarMcsChb OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
lom(21),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the MCS Channel b
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
21 LOM Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 32 }
|
|
|
|
fmroHtuFarMcsChc OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
lom(21),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the MCS Channel c
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
21 LOM Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 33 }
|
|
|
|
fmroHtuFarMcsChd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
lom(21),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the MCS Channel d
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
21 LOM Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 34 }
|
|
|
|
fmroHtuFarMcsRemCha OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
lom(21),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the MCS Remote Channel a
|
|
1 None No Alarm
|
|
21 LOM Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 35 }
|
|
|
|
fmroHtuFarMcsRemChb OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
lom(21),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the MCS Remote Channel b
|
|
1 None No Alarm
|
|
21 LOM Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 36 }
|
|
|
|
fmroHtuFarMcsRemChc OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
lom(21),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the MCS Remote Channel c
|
|
1 None No Alarm
|
|
21 LOM Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 37 }
|
|
|
|
fmroHtuFarMcsRemChd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
lom(21),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the MCS Remote Channel d
|
|
1 None No Alarm
|
|
21 LOM Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 38 }
|
|
|
|
fmroHtuFarMcs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
lom(21),
|
|
plom(22),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the entire MCS System
|
|
1 None No Alarm
|
|
21 LOM Loss Of MCS sync
|
|
22 PLOM Partial Loss Of MCS sync
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 39 }
|
|
|
|
fmroHtuFarL2SwitchWanRx OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
loa(6),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the L2Switch WAN interface (Receive signal)
|
|
1 None No Alarm
|
|
6 LOA Loss Of Activity
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 40 }
|
|
|
|
fmroHtuFarL2SwitchWanTx OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
loa(6),
|
|
mir(23),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the L2Switch WAN interface (Transmit signal)
|
|
1 None No Alarm
|
|
6 LOA Loss Of Activity
|
|
23 MIR Maximum Information Rate
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 41 }
|
|
|
|
fmroHtuFarL2SwitchLanPort1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
lfp(27),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the L2Switch LAN Port 1
|
|
1 None No Alarm
|
|
24 LinkDown No Link Detected
|
|
27 LFP Link Failure Propagation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 42 }
|
|
|
|
fmroHtuFarL2SwitchLanPort2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
lfp(27),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the L2Switch LAN Port 2
|
|
1 None No Alarm
|
|
24 LinkDown No Link Detected
|
|
27 LFP Link Failure Propagation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 43 }
|
|
|
|
fmroHtuFarL2SwitchLanPort3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
lfp(27),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the L2Switch LAN Port 3
|
|
1 None No Alarm
|
|
24 LinkDown No Link Detected
|
|
27 LFP Link Failure Propagation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 44 }
|
|
|
|
fmroHtuFarL2SwitchLanPort4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
lfp(27),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the L2Switch LAN Port 4
|
|
1 None No Alarm
|
|
24 LinkDown No Link Detected
|
|
27 LFP Link Failure Propagation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 45 }
|
|
|
|
fmroHtuFarL2SwitchBPLPort1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
linkdown(24),
|
|
lfp(27),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the L2Switch Backplane Port 1
|
|
1 None No Alarm
|
|
24 LinkDown No Link Detected
|
|
27 LFP Link Failure Propagation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 46 }
|
|
|
|
fmroHtuFarUo OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
los(9),
|
|
failUo1(28),
|
|
failUo2(29),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on the optical link
|
|
1 None No Alarm
|
|
9 LOS Loss of Signal
|
|
28 FAIL_UO1 Line protection fail on Uo1
|
|
29 FAIL_UO2 Line protection fail on Uo2
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 47 }
|
|
|
|
fmroHtuFarUo1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on first optical interface
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 48 }
|
|
|
|
fmroHtuFarUo2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
lfa(8),
|
|
los(9),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on second optical interface
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
8 LFA Loss of Frame Alignment
|
|
9 LOS Loss of Signal
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 49 }
|
|
|
|
fmroHtuFarUA OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error in 2MB Signal (Framer A) on transmission side
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 50 }
|
|
|
|
fmroHtuFarUB OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error in 2MB Signal (Framer B) on transmission side
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 51 }
|
|
|
|
fmroHtuFarUC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error in 2MB Signal (Framer C) on transmission side
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 52 }
|
|
|
|
fmroHtuFarUD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
ais(7),
|
|
lfa(8),
|
|
rai(11),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error in 2MB Signal (Framer D) on transmission side
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
7 AIS Alarm Indication Signal
|
|
8 LFA Loss of Frame Alignment
|
|
11 RAI Remote Alarm Indication
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 53 }
|
|
|
|
fmroHtuFarLosDB OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"LOS-D (Framer B) Error State
|
|
1 None No Alarm
|
|
10 Alarm Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 54 }
|
|
|
|
fmroHtuFarLosDC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"LOS-D (Framer C) Error State
|
|
1 None No Alarm
|
|
10 Alarm Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 55 }
|
|
|
|
fmroHtuFarLosDD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"LOS-D (Framer D) Error State
|
|
1 None No Alarm
|
|
10 Alarm Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 56 }
|
|
|
|
fmroHtuFarSFP1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
txfault(30),
|
|
invalid(31),
|
|
missing(32),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on first SFP modul
|
|
1 None No Alarm
|
|
30 Tx fault Transmit laser fault
|
|
31 Invalid Invalid SFP modul equipped
|
|
32 Missing No SFP modul equipped
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 57 }
|
|
|
|
fmroHtuFarSFP2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
txfault(30),
|
|
invalid(31),
|
|
missing(32),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Error on second SFP modul
|
|
1 None No Alarm
|
|
30 Tx fault Transmit laser fault
|
|
31 Invalid Invalid SFP modul equipped
|
|
32 Missing No SFP modul equipped
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroHtuFarEntry 58 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RO Regenerator
|
|
--------------------------------------------------------------------------------
|
|
fmroRegTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmroRegEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmro 4 }
|
|
|
|
fmroRegEntry OBJECT-TYPE
|
|
SYNTAX FmroRegEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmroRegPortIndex, fmroRegLinkIndex, fmroRegSectionIndex }
|
|
::= { fmroRegTable 1 }
|
|
|
|
FmroRegEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmroRegPortIndex INTEGER,
|
|
fmroRegLinkIndex INTEGER,
|
|
fmroRegSectionIndex INTEGER,
|
|
fmroRegU1L INTEGER,
|
|
fmroRegU2L INTEGER,
|
|
fmroRegU1N INTEGER,
|
|
fmroRegU2N INTEGER,
|
|
fmroRegEquipment1 INTEGER,
|
|
fmroRegEquipment2 INTEGER
|
|
}
|
|
|
|
fmroRegPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroRegEntry 1 }
|
|
|
|
fmroRegLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroRegEntry 2 }
|
|
|
|
fmroRegSectionIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
sectionA(1),
|
|
sectionB(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines which Section of Regenerators is to be queried.
|
|
Ulaf+ Version 1.0 only supports the first section.
|
|
1 sectionA First section
|
|
2 sectionB Second section"
|
|
::= { fmroRegEntry 3 }
|
|
|
|
fmroRegU1L OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Regenerator Error on HDSL Path 1 to LT
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroRegEntry 4 }
|
|
|
|
fmroRegU2L OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Regenerator Error on HDSL Path 2 to LT
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroRegEntry 5 }
|
|
|
|
fmroRegU1N OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Regenerator Error on HDSL Path 1 to NT
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroRegEntry 6 }
|
|
|
|
fmroRegU2N OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Regenerator Error on HDSL Path 2 to NT
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroRegEntry 7 }
|
|
|
|
fmroRegEquipment1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Equipment Alarm in Regenerator in HDSL Path 1
|
|
1 None No Alarm
|
|
10 Alarm Equipment Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroRegEntry 8 }
|
|
|
|
fmroRegEquipment2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Equipment Alarm in Regenerator in HDSL Path 2
|
|
1 None No Alarm
|
|
10 Alarm Equipment Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroRegEntry 9 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RO Local Led State
|
|
--------------------------------------------------------------------------------
|
|
fmroLocalLedStateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmroLocalLedStateEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmro 5 }
|
|
|
|
fmroLocalLedStateEntry OBJECT-TYPE
|
|
SYNTAX FmroLocalLedStateEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmroLocalLedStatePortIndex, fmroLocalLedStateLinkIndex }
|
|
::= { fmroLocalLedStateTable 1 }
|
|
|
|
FmroLocalLedStateEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmroLocalLedStatePortIndex INTEGER,
|
|
fmroLocalLedStateLinkIndex INTEGER,
|
|
fmroLocalLedState1 INTEGER,
|
|
fmroLocalLedState2 INTEGER,
|
|
fmroLocalLedState3 INTEGER,
|
|
fmroLocalLedState4 INTEGER,
|
|
fmroLocalLedState5 INTEGER,
|
|
fmroLocalLedState6 INTEGER,
|
|
fmroLocalLedState7 INTEGER,
|
|
fmroLocalLedState8 INTEGER,
|
|
fmroLocalLedState9 INTEGER,
|
|
fmroLocalLedState10 INTEGER,
|
|
fmroLocalLedColor1 INTEGER,
|
|
fmroLocalLedColor2 INTEGER,
|
|
fmroLocalLedColor3 INTEGER,
|
|
fmroLocalLedColor4 INTEGER,
|
|
fmroLocalLedColor5 INTEGER,
|
|
fmroLocalLedColor6 INTEGER,
|
|
fmroLocalLedColor7 INTEGER,
|
|
fmroLocalLedColor8 INTEGER,
|
|
fmroLocalLedColor9 INTEGER,
|
|
fmroLocalLedColor10 INTEGER,
|
|
fmroLocalLedState11 INTEGER,
|
|
fmroLocalLedState12 INTEGER,
|
|
fmroLocalLedState13 INTEGER,
|
|
fmroLocalLedState14 INTEGER,
|
|
fmroLocalLedState15 INTEGER,
|
|
fmroLocalLedState16 INTEGER,
|
|
fmroLocalLedState17 INTEGER,
|
|
fmroLocalLedState18 INTEGER,
|
|
fmroLocalLedState19 INTEGER,
|
|
fmroLocalLedState20 INTEGER,
|
|
fmroLocalLedColor11 INTEGER,
|
|
fmroLocalLedColor12 INTEGER,
|
|
fmroLocalLedColor13 INTEGER,
|
|
fmroLocalLedColor14 INTEGER,
|
|
fmroLocalLedColor15 INTEGER,
|
|
fmroLocalLedColor16 INTEGER,
|
|
fmroLocalLedColor17 INTEGER,
|
|
fmroLocalLedColor18 INTEGER,
|
|
fmroLocalLedColor19 INTEGER,
|
|
fmroLocalLedColor20 INTEGER
|
|
}
|
|
|
|
fmroLocalLedStatePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroLocalLedStateEntry 1 }
|
|
|
|
fmroLocalLedStateLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroLocalLedStateEntry 2 }
|
|
|
|
fmroLocalLedState1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED1 of the device.
|
|
HTU: Loop / Maintenance
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 3 }
|
|
|
|
fmroLocalLedState2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED2 of the device.
|
|
HTU: LOS/LFA-U
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 4 }
|
|
|
|
fmroLocalLedState3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED3 of the device.
|
|
HTU: LOS/LFA-T
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 5 }
|
|
|
|
fmroLocalLedState4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED4 of the device.
|
|
HTU: AIS-U
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 6 }
|
|
|
|
fmroLocalLedState5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED5 of the device.
|
|
HTU: BER6-U
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 7 }
|
|
|
|
fmroLocalLedState6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED6 of the device.
|
|
HTU: PRA (Desktop only)
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 8 }
|
|
|
|
fmroLocalLedState7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED7 of the device.
|
|
HTU: LOA-R (Desktop only)
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 9 }
|
|
|
|
fmroLocalLedState8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED8 of the device.
|
|
HTU: LOA-T (Desktop only)
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 10 }
|
|
|
|
fmroLocalLedState9 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED9 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 11 }
|
|
|
|
fmroLocalLedState10 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED10 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 12 }
|
|
|
|
fmroLocalLedColor1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED1 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 13 }
|
|
|
|
fmroLocalLedColor2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED2 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 14 }
|
|
|
|
fmroLocalLedColor3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED3 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 15 }
|
|
|
|
fmroLocalLedColor4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED4 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 16 }
|
|
|
|
fmroLocalLedColor5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED5 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 17 }
|
|
|
|
fmroLocalLedColor6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED6 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 18 }
|
|
|
|
fmroLocalLedColor7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED7 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 19 }
|
|
|
|
fmroLocalLedColor8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED8 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 20 }
|
|
|
|
fmroLocalLedColor9 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED9 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 21 }
|
|
|
|
fmroLocalLedColor10 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED10 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 22 }
|
|
|
|
fmroLocalLedState11 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED11 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 23 }
|
|
|
|
fmroLocalLedState12 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED12 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 24 }
|
|
|
|
fmroLocalLedState13 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED13 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 25 }
|
|
|
|
fmroLocalLedState14 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED14 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 26 }
|
|
|
|
fmroLocalLedState15 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED15 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 27 }
|
|
|
|
fmroLocalLedState16 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED16 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 28 }
|
|
|
|
fmroLocalLedState17 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED17 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 29 }
|
|
|
|
fmroLocalLedState18 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED18 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 30 }
|
|
|
|
fmroLocalLedState19 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED19 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 31 }
|
|
|
|
fmroLocalLedState20 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED20 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroLocalLedStateEntry 32 }
|
|
|
|
fmroLocalLedColor11 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED11 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 33 }
|
|
|
|
fmroLocalLedColor12 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED12 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 34 }
|
|
|
|
fmroLocalLedColor13 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED13 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 35 }
|
|
|
|
fmroLocalLedColor14 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED14 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 36 }
|
|
|
|
fmroLocalLedColor15 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED15 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 37 }
|
|
|
|
fmroLocalLedColor16 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED16 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 38 }
|
|
|
|
fmroLocalLedColor17 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED17 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 39 }
|
|
|
|
fmroLocalLedColor18 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED18 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 40 }
|
|
|
|
fmroLocalLedColor19 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED19 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 41 }
|
|
|
|
fmroLocalLedColor20 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED20 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroLocalLedStateEntry 42 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RO Far Led State
|
|
--------------------------------------------------------------------------------
|
|
fmroFarLedStateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmroFarLedStateEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmro 6 }
|
|
|
|
fmroFarLedStateEntry OBJECT-TYPE
|
|
SYNTAX FmroFarLedStateEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmroFarLedStatePortIndex, fmroFarLedStateLinkIndex }
|
|
::= { fmroFarLedStateTable 1 }
|
|
|
|
FmroFarLedStateEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmroFarLedStatePortIndex INTEGER,
|
|
fmroFarLedStateLinkIndex INTEGER,
|
|
fmroFarLedState1 INTEGER,
|
|
fmroFarLedState2 INTEGER,
|
|
fmroFarLedState3 INTEGER,
|
|
fmroFarLedState4 INTEGER,
|
|
fmroFarLedState5 INTEGER,
|
|
fmroFarLedState6 INTEGER,
|
|
fmroFarLedState7 INTEGER,
|
|
fmroFarLedState8 INTEGER,
|
|
fmroFarLedState9 INTEGER,
|
|
fmroFarLedState10 INTEGER,
|
|
fmroFarLedColor1 INTEGER,
|
|
fmroFarLedColor2 INTEGER,
|
|
fmroFarLedColor3 INTEGER,
|
|
fmroFarLedColor4 INTEGER,
|
|
fmroFarLedColor5 INTEGER,
|
|
fmroFarLedColor6 INTEGER,
|
|
fmroFarLedColor7 INTEGER,
|
|
fmroFarLedColor8 INTEGER,
|
|
fmroFarLedColor9 INTEGER,
|
|
fmroFarLedColor10 INTEGER,
|
|
fmroFarLedState11 INTEGER,
|
|
fmroFarLedState12 INTEGER,
|
|
fmroFarLedState13 INTEGER,
|
|
fmroFarLedState14 INTEGER,
|
|
fmroFarLedState15 INTEGER,
|
|
fmroFarLedState16 INTEGER,
|
|
fmroFarLedState17 INTEGER,
|
|
fmroFarLedState18 INTEGER,
|
|
fmroFarLedState19 INTEGER,
|
|
fmroFarLedState20 INTEGER,
|
|
fmroFarLedColor11 INTEGER,
|
|
fmroFarLedColor12 INTEGER,
|
|
fmroFarLedColor13 INTEGER,
|
|
fmroFarLedColor14 INTEGER,
|
|
fmroFarLedColor15 INTEGER,
|
|
fmroFarLedColor16 INTEGER,
|
|
fmroFarLedColor17 INTEGER,
|
|
fmroFarLedColor18 INTEGER,
|
|
fmroFarLedColor19 INTEGER,
|
|
fmroFarLedColor20 INTEGER
|
|
}
|
|
|
|
fmroFarLedStatePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroFarLedStateEntry 1 }
|
|
|
|
fmroFarLedStateLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroFarLedStateEntry 2 }
|
|
|
|
fmroFarLedState1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED1 of the device.
|
|
HTU: Loop / Maintenance
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 3 }
|
|
|
|
fmroFarLedState2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED2 of the device.
|
|
HTU: LOS/LFA-U
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 4 }
|
|
|
|
fmroFarLedState3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED3 of the device.
|
|
HTU: LOS/LFA-T
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 5 }
|
|
|
|
fmroFarLedState4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED4 of the device.
|
|
HTU: AIS-U
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 6 }
|
|
|
|
fmroFarLedState5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED5 of the device.
|
|
HTU: BER6-U
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 7 }
|
|
|
|
fmroFarLedState6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED6 of the device.
|
|
HTU: PRA (Desktop only)
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 8 }
|
|
|
|
fmroFarLedState7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED7 of the device.
|
|
HTU: LOA-R (Desktop only)
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 9 }
|
|
|
|
fmroFarLedState8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED8 of the device.
|
|
HTU: LOA-T (Desktop only)
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 10 }
|
|
|
|
fmroFarLedState9 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED9 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 11 }
|
|
|
|
fmroFarLedState10 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED10 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 12 }
|
|
|
|
fmroFarLedColor1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED1 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 13 }
|
|
|
|
fmroFarLedColor2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED2 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 14 }
|
|
|
|
fmroFarLedColor3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED3 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 15 }
|
|
|
|
fmroFarLedColor4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED4 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 16 }
|
|
|
|
fmroFarLedColor5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED5 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 17 }
|
|
|
|
fmroFarLedColor6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED6 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 18 }
|
|
|
|
fmroFarLedColor7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED7 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 19 }
|
|
|
|
fmroFarLedColor8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED8 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 20 }
|
|
|
|
fmroFarLedColor9 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED9 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 21 }
|
|
|
|
fmroFarLedColor10 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED10 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 22 }
|
|
|
|
fmroFarLedState11 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED11 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 23 }
|
|
|
|
fmroFarLedState12 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED12 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 24 }
|
|
|
|
fmroFarLedState13 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED13 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 25 }
|
|
|
|
fmroFarLedState14 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED14 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 26 }
|
|
|
|
fmroFarLedState15 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED15 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 27 }
|
|
|
|
fmroFarLedState16 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED16 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 28 }
|
|
|
|
fmroFarLedState17 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED17 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 29 }
|
|
|
|
fmroFarLedState18 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED18 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 30 }
|
|
|
|
fmroFarLedState19 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED19 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 31 }
|
|
|
|
fmroFarLedState20 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
ledBlink4(6),
|
|
ledBlink5(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED20 of the device.
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
4 Blinking pattern 2
|
|
5 Blinking pattern 3
|
|
6 Blinking pattern 4
|
|
7 Blinking pattern 5"
|
|
::= { fmroFarLedStateEntry 32 }
|
|
|
|
fmroFarLedColor11 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED11 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 33 }
|
|
|
|
fmroFarLedColor12 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED12 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 34 }
|
|
|
|
fmroFarLedColor13 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED13 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 35 }
|
|
|
|
fmroFarLedColor14 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED14 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 36 }
|
|
|
|
fmroFarLedColor15 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED15 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 37 }
|
|
|
|
fmroFarLedColor16 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED16 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 38 }
|
|
|
|
fmroFarLedColor17 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED17 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 39 }
|
|
|
|
fmroFarLedColor18 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED18 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 40 }
|
|
|
|
fmroFarLedColor19 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED19 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 41 }
|
|
|
|
fmroFarLedColor20 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED20 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroFarLedStateEntry 42 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RO Omi Led State
|
|
--------------------------------------------------------------------------------
|
|
fmroOmiLedStateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmroOmiLedStateEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmro 7 }
|
|
|
|
fmroOmiLedStateEntry OBJECT-TYPE
|
|
SYNTAX FmroOmiLedStateEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmroOmiLedStatePortIndex }
|
|
::= { fmroOmiLedStateTable 1 }
|
|
|
|
FmroOmiLedStateEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmroOmiLedStatePortIndex INTEGER,
|
|
fmroOmiLedState1 INTEGER,
|
|
fmroOmiLedState2 INTEGER,
|
|
fmroOmiLedState3 INTEGER,
|
|
fmroOmiLedState4 INTEGER,
|
|
fmroOmiLedState5 INTEGER,
|
|
fmroOmiLedState6 INTEGER,
|
|
fmroOmiLedState7 INTEGER,
|
|
fmroOmiLedState8 INTEGER,
|
|
fmroOmiLedState9 INTEGER,
|
|
fmroOmiLedState10 INTEGER,
|
|
fmroOmiLedState11 INTEGER,
|
|
fmroOmiLedState12 INTEGER,
|
|
fmroOmiLedState13 INTEGER,
|
|
fmroOmiLedState14 INTEGER,
|
|
fmroOmiLedState15 INTEGER,
|
|
fmroOmiLedState16 INTEGER,
|
|
fmroOmiLedColor1 INTEGER,
|
|
fmroOmiLedColor2 INTEGER,
|
|
fmroOmiLedColor3 INTEGER,
|
|
fmroOmiLedColor4 INTEGER,
|
|
fmroOmiLedColor5 INTEGER,
|
|
fmroOmiLedColor6 INTEGER,
|
|
fmroOmiLedColor7 INTEGER,
|
|
fmroOmiLedColor8 INTEGER,
|
|
fmroOmiLedColor9 INTEGER,
|
|
fmroOmiLedColor10 INTEGER,
|
|
fmroOmiLedColor11 INTEGER,
|
|
fmroOmiLedColor12 INTEGER,
|
|
fmroOmiLedColor13 INTEGER,
|
|
fmroOmiLedColor14 INTEGER,
|
|
fmroOmiLedColor15 INTEGER,
|
|
fmroOmiLedColor16 INTEGER
|
|
}
|
|
|
|
fmroOmiLedStatePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroOmiLedStateEntry 1 }
|
|
|
|
fmroOmiLedState1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED1 of the OMI: Urgent Alarm
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
3 Blinking pattern 2
|
|
4 Blinking pattern 3"
|
|
::= { fmroOmiLedStateEntry 3 }
|
|
|
|
fmroOmiLedState2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED2 of the OMI: Non-Urgent Alarm
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
3 Blinking pattern 2
|
|
4 Blinking pattern 3"
|
|
::= { fmroOmiLedStateEntry 4 }
|
|
|
|
fmroOmiLedState3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED3 of the OMI: Acknowledged Alarm
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
3 Blinking pattern 2
|
|
4 Blinking pattern 3"
|
|
::= { fmroOmiLedStateEntry 5 }
|
|
|
|
fmroOmiLedState4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED4 of the OMI
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
3 Blinking pattern 2
|
|
4 Blinking pattern 3"
|
|
::= { fmroOmiLedStateEntry 6 }
|
|
|
|
fmroOmiLedState5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED5 of the OMI
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
3 Blinking pattern 2
|
|
4 Blinking pattern 3"
|
|
::= { fmroOmiLedStateEntry 7 }
|
|
|
|
fmroOmiLedState6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED6 of the OMI
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
3 Blinking pattern 2
|
|
4 Blinking pattern 3"
|
|
::= { fmroOmiLedStateEntry 8 }
|
|
|
|
fmroOmiLedState7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED7 of the OMI
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
3 Blinking pattern 2
|
|
4 Blinking pattern 3"
|
|
::= { fmroOmiLedStateEntry 9 }
|
|
|
|
fmroOmiLedState8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED8 of the OMI
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
3 Blinking pattern 2
|
|
4 Blinking pattern 3"
|
|
::= { fmroOmiLedStateEntry 10 }
|
|
|
|
fmroOmiLedState9 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED9 of the OMI
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
3 Blinking pattern 2
|
|
4 Blinking pattern 3"
|
|
::= { fmroOmiLedStateEntry 11 }
|
|
|
|
fmroOmiLedState10 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED10 of the OMI
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
3 Blinking pattern 2
|
|
4 Blinking pattern 3"
|
|
::= { fmroOmiLedStateEntry 12 }
|
|
|
|
fmroOmiLedState11 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED11 of the OMI
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
3 Blinking pattern 2
|
|
4 Blinking pattern 3"
|
|
::= { fmroOmiLedStateEntry 13 }
|
|
|
|
fmroOmiLedState12 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED12 of the OMI
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
3 Blinking pattern 2
|
|
4 Blinking pattern 3"
|
|
::= { fmroOmiLedStateEntry 14 }
|
|
|
|
fmroOmiLedState13 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED13 of the OMI
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
3 Blinking pattern 2
|
|
4 Blinking pattern 3"
|
|
::= { fmroOmiLedStateEntry 15 }
|
|
|
|
fmroOmiLedState14 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED14 of the OMI
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
3 Blinking pattern 2
|
|
4 Blinking pattern 3"
|
|
::= { fmroOmiLedStateEntry 16 }
|
|
|
|
fmroOmiLedState15 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED15 of the OMI
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
3 Blinking pattern 2
|
|
4 Blinking pattern 3"
|
|
::= { fmroOmiLedStateEntry 17 }
|
|
|
|
fmroOmiLedState16 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledOff(1),
|
|
ledOn(2),
|
|
ledBlink1(3),
|
|
ledBlink2(4),
|
|
ledBlink3(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of LED16 of the OMI
|
|
1 Off
|
|
2 On
|
|
3 Blinking pattern 1
|
|
3 Blinking pattern 2
|
|
4 Blinking pattern 3"
|
|
::= { fmroOmiLedStateEntry 18 }
|
|
|
|
fmroOmiLedColor1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED1 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroOmiLedStateEntry 19 }
|
|
|
|
fmroOmiLedColor2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED2 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroOmiLedStateEntry 20 }
|
|
fmroOmiLedColor3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED3 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroOmiLedStateEntry 21 }
|
|
fmroOmiLedColor4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED4 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroOmiLedStateEntry 22 }
|
|
fmroOmiLedColor5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED5 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroOmiLedStateEntry 23 }
|
|
fmroOmiLedColor6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED6 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroOmiLedStateEntry 24 }
|
|
fmroOmiLedColor7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED7 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroOmiLedStateEntry 25 }
|
|
fmroOmiLedColor8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED8 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroOmiLedStateEntry 26 }
|
|
fmroOmiLedColor9 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED9 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroOmiLedStateEntry 27 }
|
|
fmroOmiLedColor10 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED10 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroOmiLedStateEntry 28 }
|
|
fmroOmiLedColor11 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED11 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroOmiLedStateEntry 29 }
|
|
fmroOmiLedColor12 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED12 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroOmiLedStateEntry 30 }
|
|
fmroOmiLedColor13 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED13 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroOmiLedStateEntry 31 }
|
|
fmroOmiLedColor14 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED14 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroOmiLedStateEntry 32 }
|
|
fmroOmiLedColor15 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED15 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroOmiLedStateEntry 33 }
|
|
fmroOmiLedColor16 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ledBlack(1),
|
|
ledYellow(2),
|
|
ledRed(3),
|
|
ledGreen(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color of LED16 of the device.
|
|
1 LED color is black
|
|
2 LED color is yellow
|
|
3 LED color is red
|
|
4 LED color is green"
|
|
::= { fmroOmiLedStateEntry 34 }
|
|
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RO Threshold alarms
|
|
--------------------------------------------------------------------------------
|
|
fmroThresholdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmroThresholdEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmro 8 }
|
|
|
|
fmroThresholdEntry OBJECT-TYPE
|
|
SYNTAX FmroThresholdEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmroThresholdPortIndex, fmroThresholdLinkIndex, fmroThresholdCounterIndex }
|
|
::= { fmroThresholdTable 1 }
|
|
|
|
FmroThresholdEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmroThresholdPortIndex INTEGER,
|
|
fmroThresholdLinkIndex INTEGER,
|
|
fmroThresholdCounterIndex INTEGER,
|
|
fmroThresholdAlarms OCTET STRING
|
|
}
|
|
|
|
fmroThresholdPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroThresholdEntry 1 }
|
|
|
|
fmroThresholdLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroThresholdEntry 2 }
|
|
|
|
fmroThresholdCounterIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the performance counter of a link
|
|
and is used as index for the other elements in the Table
|
|
The following values are foreseen:
|
|
5 LT Wire pair 1 Direction NT
|
|
6 Reg1 Wire pair 1 Direction LT
|
|
7 Reg1 Wire pair 1 Direction NT
|
|
8 NT Wire pair 1 Direction LT
|
|
9 LT Wire pair 2 Direction NT
|
|
10 Reg1 Wire pair 2 Direction LT
|
|
11 Reg1 Wire pair 2 Direction NT
|
|
12 NT Wire pair 2 Direction LT
|
|
15 Reg2 Wire pair 1 Direction LT
|
|
16 Reg2 Wire pair 1 Direction NT
|
|
17 Reg2 Wire pair 2 Direction LT
|
|
18 Reg2 Wire pair 2 Direction NT
|
|
19 Reg3 Wire pair 1 Direction LT
|
|
20 Reg3 Wire pair 1 Direction NT
|
|
21 Reg4 Wire pair 1 Direction LT
|
|
22 Reg4 Wire pair 1 Direction NT
|
|
23 Reg5 Wire pair 1 Direction LT
|
|
24 Reg5 Wire pair 1 Direction NT
|
|
25 Reg6 Wire pair 1 Direction LT
|
|
26 Reg6 Wire pair 1 Direction NT
|
|
27 Reg7 Wire pair 1 Direction LT
|
|
28 Reg7 Wire pair 1 Direction NT
|
|
29 Reg8 Wire pair 1 Direction LT
|
|
30 Reg8 Wire pair 1 Direction NT
|
|
31 Reg3 Wire pair 2 Direction LT
|
|
32 Reg3 Wire pair 2 Direction NT
|
|
33 Reg4 Wire pair 2 Direction LT
|
|
34 Reg4 Wire pair 2 Direction NT
|
|
35 Reg5 Wire pair 2 Direction LT
|
|
36 Reg5 Wire pair 2 Direction NT
|
|
37 Reg6 Wire pair 2 Direction LT
|
|
38 Reg6 Wire pair 2 Direction NT
|
|
39 Reg7 Wire pair 2 Direction LT
|
|
40 Reg7 Wire pair 2 Direction NT
|
|
41 Reg8 Wire pair 2 Direction LT
|
|
42 Reg8 Wire pair 2 Direction NT
|
|
43 Reg1 Wire pair 3 Direction LT
|
|
44 Reg1 Wire pair 3 Direction NT
|
|
45 Reg2 Wire pair 3 Direction LT
|
|
46 Reg2 Wire pair 3 Direction NT
|
|
47 Reg3 Wire pair 3 Direction LT
|
|
48 Reg3 Wire pair 3 Direction NT
|
|
49 Reg4 Wire pair 3 Direction LT
|
|
50 Reg4 Wire pair 3 Direction NT
|
|
51 Reg5 Wire pair 3 Direction LT
|
|
52 Reg5 Wire pair 3 Direction NT
|
|
53 Reg6 Wire pair 3 Direction LT
|
|
54 Reg6 Wire pair 3 Direction NT
|
|
55 Reg7 Wire pair 3 Direction LT
|
|
56 Reg7 Wire pair 3 Direction NT
|
|
57 Reg8 Wire pair 3 Direction LT
|
|
58 Reg8 Wire pair 3 Direction NT
|
|
59 Reg1 Wire pair 4 Direction LT
|
|
60 Reg1 Wire pair 4 Direction NT
|
|
61 Reg2 Wire pair 4 Direction LT
|
|
62 Reg2 Wire pair 4 Direction NT
|
|
63 Reg3 Wire pair 4 Direction LT
|
|
64 Reg3 Wire pair 4 Direction NT
|
|
65 Reg4 Wire pair 4 Direction LT
|
|
66 Reg4 Wire pair 4 Direction NT
|
|
67 Reg5 Wire pair 4 Direction LT
|
|
68 Reg5 Wire pair 4 Direction NT
|
|
69 Reg6 Wire pair 4 Direction LT
|
|
70 Reg6 Wire pair 4 Direction NT
|
|
71 Reg7 Wire pair 4 Direction LT
|
|
72 Reg7 Wire pair 4 Direction NT
|
|
73 Reg8 Wire pair 4 Direction LT
|
|
74 Reg8 Wire pair 4 Direction NT
|
|
75 LT Wire pair 3 Direction NT
|
|
76 NT Wire pair 3 Direction LT
|
|
77 LT Wire pair 4 Direction NT
|
|
78 NT Wire pair 4 Direction LT"
|
|
::= { fmroThresholdEntry 3 }
|
|
|
|
fmroThresholdAlarms OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(2))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the Attenuation and SNR Threshold at this
|
|
point has been reached or crossed
|
|
|
|
Byte 0
|
|
1 None No Attenuation Threshold Alarm
|
|
10 Att_Alarm Attenuation Threshold Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device
|
|
Byte 1
|
|
1 None No SNR Threshold Alarm
|
|
10 Snr_Alarm SNR Threshold Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroThresholdEntry 4 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RO Detail Alarms
|
|
--------------------------------------------------------------------------------
|
|
fmroAlarmLogTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmroAlarmLogEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmro 9 }
|
|
|
|
fmroAlarmLogEntry OBJECT-TYPE
|
|
SYNTAX FmroAlarmLogEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmroAlarmLogPortIndex, fmroAlarmLogLinkIndex, fmroAlarmLogBlockIndex }
|
|
::= { fmroAlarmLogTable 1 }
|
|
|
|
FmroAlarmLogEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmroAlarmLogPortIndex INTEGER,
|
|
fmroAlarmLogLinkIndex INTEGER,
|
|
fmroAlarmLogBlockIndex INTEGER,
|
|
fmroAlarmLogLatestDataFieldNumber INTEGER,
|
|
fmroAlarmLogCurrentTime INTEGER,
|
|
fmroAlarmLogInformation OCTET STRING
|
|
}
|
|
|
|
fmroAlarmLogPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroAlarmLogEntry 1 }
|
|
|
|
fmroAlarmLogLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroAlarmLogEntry 2 }
|
|
|
|
fmroAlarmLogBlockIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the alarm log block number of a link
|
|
and is used as index for the other elements in the Table
|
|
Foreseen values are:
|
|
1 Alarm Log Entries 1..25
|
|
2 Alarm Log Entries 26..50
|
|
3 Alarm Log Entries 51..75
|
|
4 Alarm Log Entries 76..100"
|
|
::= { fmroAlarmLogEntry 3 }
|
|
|
|
fmroAlarmLogLatestDataFieldNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the latest alarm log entry
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroAlarmLogEntry 4 }
|
|
|
|
fmroAlarmLogCurrentTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable contains the current time in seconds since power up
|
|
0xfffffffe Unknown value
|
|
0xffffffff Unsupported variable for addressed device"
|
|
::= { fmroAlarmLogEntry 5 }
|
|
|
|
fmroAlarmLogInformation OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(176))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the alarm log entries in blocks of 25 entries where
|
|
each entry is 7 bytes long. Each entry has the following format:
|
|
Byte(s) Range Content
|
|
1..4 Event time in seconds since power up
|
|
5 0..21 Interface at which the event occurred
|
|
6 0..18 Error which occurred at the interface
|
|
7 Event Details
|
|
|
|
The interfaces are coded as follows:
|
|
0 U1 Transmission Interface Wire pair 1
|
|
1 U2 Transmission Interface Wire pair 2
|
|
2 U Transmission Interface
|
|
3 T G.703 Interface
|
|
4 DC Data Interface Direction Customer
|
|
5 DN Data Interface Direction Network
|
|
6 Equipment
|
|
7 LOSD
|
|
8 T4OUT Loss of Signal for clock output
|
|
9 T3IN Loss of Signal for clock input
|
|
10 RPS Remote Power Supply
|
|
11 RTA
|
|
12 Powerfail
|
|
13
|
|
14 REG1UL Regenerator on wire pair 1, direction LT
|
|
15 REG2UL Regenerator on wire pair 2, direction LT
|
|
16 REG1UN Regenerator on wire pair 1, direction NT
|
|
17 REG2UN Regenerator on wire pair 2, direction NT
|
|
18 REG1E Regenerator on wire pair 1
|
|
19 REG2E Regenerator on wire pair 2
|
|
20 LASER Laser ageing on OTU
|
|
21 Powerfail CPE
|
|
22 THRES_ATT Attenuation Threshold Alarm
|
|
23 THRES_ATT_REG_U1L Attenuation Threshold Alarm at the Regenerator on wire pair 1, direction LT
|
|
24 THRES_ATT_REG_U2L Attenuation Threshold Alarm at the Regenerator on wire pair 2, direction LT
|
|
25 THRES_ATT_REG_U1N Attenuation Threshold Alarm at the Regenerator on wire pair 1, direction NT
|
|
26 THRES_ATT_REG_U2N Attenuation Threshold Alarm at the Regenerator on wire pair 2, direction NT
|
|
27 THRES_SNR SNR Threshold Alarm
|
|
28 THRES_SNR_REG_U1L SNR Threshold Alarm at the Regenerator on wire pair 1, direction LT
|
|
29 THRES_SNR_REG_U2L SNR Threshold Alarm at the Regenerator on wire pair 2, direction LT
|
|
30 THRES_SNR_REG_U1N SNR Threshold Alarm at the Regenerator on wire pair 1, direction NT
|
|
31 THRES_SNR_REG_U2N SNR Threshold Alarm at the Regenerator on wire pair 2, direction NT
|
|
32 U3 Transmission Interface Wire pair 3
|
|
33 U4 Transmission Interface Wire pair 4
|
|
34 RPS2 Remote Power Supply on wire pair 2
|
|
35 RPS3 Remote Power Supply on wire pair 3
|
|
36 RPS4 Remote Power Supply on wire pair 4
|
|
37 REG3UL Regenerator on wire pair 3, direction LT
|
|
38 REG4UL Regenerator on wire pair 4, direction LT
|
|
39 REG3UN Regenerator on wire pair 3, direction NT
|
|
40 REG4UN Regenerator on wire pair 4, direction NT
|
|
41 REG3E Regenerator on wire pair 3
|
|
42 REG4E Regenerator on wire pair 4
|
|
43 THRES_ATT1 Attenuation Threshold Alarm on wire pair 1
|
|
44 THRES_ATT2 Attenuation Threshold Alarm on wire pair 2
|
|
45 THRES_ATT3 Attenuation Threshold Alarm on wire pair 3
|
|
46 THRES_ATT4 Attenuation Threshold Alarm on wire pair 4
|
|
47 THRES_ATT_REG_U3L Attenuation Threshold Alarm at the Regenerator on wire pair 3, direction LT
|
|
48 THRES_ATT_REG_U4L Attenuation Threshold Alarm at the Regenerator on wire pair 4, direction LT
|
|
49 THRES_ATT_REG_U3N Attenuation Threshold Alarm at the Regenerator on wire pair 3, direction NT
|
|
50 THRES_ATT_REG_U4N Attenuation Threshold Alarm at the Regenerator on wire pair 4, direction NT
|
|
51 THRES_SNR1 SNR Threshold Alarm on wire pair 1
|
|
52 THRES_SNR2 SNR Threshold Alarm on wire pair 2
|
|
53 THRES_SNR3 SNR Threshold Alarm on wire pair 3
|
|
54 THRES_SNR4 SNR Threshold Alarm on wire pair 4
|
|
55 THRES_SNR_REG_U3L SNR Threshold Alarm at the Regenerator on wire pair 3, direction LT
|
|
56 THRES_SNR_REG_U4L SNR Threshold Alarm at the Regenerator on wire pair 4, direction LT
|
|
57 THRES_SNR_REG_U3N SNR Threshold Alarm at the Regenerator on wire pair 3, direction NT
|
|
58 THRES_SNR_REG_U4N SNR Threshold Alarm at the Regenerator on wire pair 4, direction NT
|
|
59 V_SL V-Interface on the slave device
|
|
60 T_SL T-Interface on the slave device
|
|
61 DC_SL Data Interface Direction Customer on the slave device
|
|
62 DN_SL Data Interface Direction Network on the slave device
|
|
63 VA VA Interface
|
|
64 VB VB Interface
|
|
65 VC VC Interface
|
|
66 VD VD Interface
|
|
67 MCSa MCS channel a
|
|
68 MCSb MCS channel b
|
|
69 MCSc MCS channel c
|
|
70 MCSd MCS channel d
|
|
71 MCSa_FarEnd MCS channel a, far end
|
|
72 MCSb_FarEnd MCS channel b, far end
|
|
73 MCSc_FarEnd MCS channel c, far end
|
|
74 MCSd_FarEnd MCS channel d, far end
|
|
75 MCS MCS
|
|
76 WAN_RX WAN Rx
|
|
77 WAN_TX WAN Tx
|
|
78 ETH_P1 Ethernet Port 1
|
|
79 ETH_P2 Ethernet Port 2
|
|
80 ETH_P3 Ethernet Port 3
|
|
81 ETH_P4 Ethernet Port 4
|
|
82 EXT_AL_1 External Alarm 1
|
|
83 EXT_AL_2 External Alarm 2
|
|
84 EXT_AL_3 External Alarm 3
|
|
|
|
The Errors which can occur are coded as follows:
|
|
0 NONE No alarm
|
|
1 HPO Half partial operation
|
|
2 FPO Full partial operation
|
|
3 BER6 Bit error ratio 10^-6
|
|
4 BER3 Bit error ratio 10^-3
|
|
5 LOA Loss of activity
|
|
6 AIS Alarm indication signal
|
|
7 LFA Loss of frame alignment
|
|
8 LOS Loss of signal
|
|
9 AON Alarm
|
|
10 RAI Remote alarm indication
|
|
11 UCR12 Undercurrent on wire pair 1 & 2
|
|
12 UCR1 Undercurrent on wire pair 1
|
|
13 UCR2 Undercurrent on wire pair 2
|
|
14 OVR Overload
|
|
15 NOSYM Asymmetry
|
|
16 DEFECT
|
|
17 BNA Bandwidth not available
|
|
18 LOSW Loss of Synchronisation
|
|
|
|
The Event Details are bit coded as follows:
|
|
Bit Value Content
|
|
0..1 0 Non-Urgent Alarm
|
|
1 Urgent Alarm
|
|
2 No Alarm
|
|
3 No Alarm
|
|
|
|
2 4 -
|
|
|
|
3 8 LT/NT Alaem (clear) / Reg Alarm (set)
|
|
|
|
4..6 If Bit 3 is set
|
|
000 Regenerator Section 1
|
|
001 Regenerator Section 2
|
|
010 Regenerator Section 3
|
|
011 Regenerator Section 4
|
|
100 Regenerator Section 5
|
|
101 Regenerator Section 6
|
|
110 Regenerator Section 7
|
|
111 Regenerator Section 8
|
|
|
|
7 If Bit 3 is clear
|
|
128 LT (clear) / NT (set)
|
|
|
|
Byte 176 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmroAlarmLogEntry 6 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RO SRU
|
|
--------------------------------------------------------------------------------
|
|
fmroSruTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmroSruEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmro 10 }
|
|
|
|
fmroSruEntry OBJECT-TYPE
|
|
SYNTAX FmroSruEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmroSruPortIndex, fmroSruLinkIndex, fmroSruSectionIndex }
|
|
::= { fmroSruTable 1 }
|
|
|
|
FmroSruEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmroSruPortIndex INTEGER,
|
|
fmroSruLinkIndex INTEGER,
|
|
fmroSruSectionIndex INTEGER,
|
|
fmroSruU1L INTEGER,
|
|
fmroSruU2L INTEGER,
|
|
fmroSruU1N INTEGER,
|
|
fmroSruU2N INTEGER,
|
|
fmroSruEquipment1 INTEGER,
|
|
fmroSruEquipment2 INTEGER,
|
|
fmroSruU3L INTEGER,
|
|
fmroSruU4L INTEGER,
|
|
fmroSruU3N INTEGER,
|
|
fmroSruU4N INTEGER,
|
|
fmroSruEquipment3 INTEGER,
|
|
fmroSruEquipment4 INTEGER
|
|
}
|
|
|
|
fmroSruPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroSruEntry 1 }
|
|
|
|
fmroSruLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroSruEntry 2 }
|
|
|
|
fmroSruSectionIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
section1(1),
|
|
section2(2),
|
|
section3(3),
|
|
section4(4),
|
|
section5(5),
|
|
section6(6),
|
|
section7(7),
|
|
section8(8)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines which Section of Regenerators is to be queried.
|
|
Ulaf+ Version 1.0 only supports the first section.
|
|
1 section1 First section
|
|
2 section2 Second section
|
|
3 section3 Third section
|
|
4 section4 Fourth section
|
|
5 section5 Fifth section
|
|
6 section6 Sixth section
|
|
7 section7 Seventh section
|
|
8 section8 Eighth section"
|
|
::= { fmroSruEntry 3 }
|
|
|
|
fmroSruU1L OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Regenerator Error on SHDSL Path 1 to LT
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SHDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroSruEntry 4 }
|
|
|
|
fmroSruU2L OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Regenerator Error on SHDSL Path 2 to LT
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SHDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroSruEntry 5 }
|
|
|
|
fmroSruU1N OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Regenerator Error on SHDSL Path 1 to NT
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SHDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroSruEntry 6 }
|
|
|
|
fmroSruU2N OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Regenerator Error on SHDSL Path 2 to NT
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SHDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroSruEntry 7 }
|
|
|
|
fmroSruEquipment1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Equipment Alarm in Regenerator in SHDSL Path 1
|
|
1 None No Alarm
|
|
10 Alarm Equipment Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroSruEntry 8 }
|
|
|
|
fmroSruEquipment2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Equipment Alarm in Regenerator in SHDSL Path 2
|
|
1 None No Alarm
|
|
10 Alarm Equipment Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroSruEntry 9 }
|
|
|
|
fmroSruU3L OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Regenerator Error on xDSL Path 3 to LT
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroSruEntry 10 }
|
|
|
|
fmroSruU4L OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Regenerator Error on xDSL Path 4 to LT
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroSruEntry 11 }
|
|
|
|
fmroSruU3N OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Regenerator Error on xDSL Path 3 to NT
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroSruEntry 12 }
|
|
|
|
fmroSruU4N OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ber6(4),
|
|
ber3(5),
|
|
los(9),
|
|
losw(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Regenerator Error on xDSL Path 4 to NT
|
|
1 None No Alarm
|
|
4 BER6 Bit Error Ratio 10^-6
|
|
5 BER3 Bit Error Ratio 10^-3
|
|
9 LOS Loss of Signal
|
|
19 LOSW Loss of SDSL synchronistation
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroSruEntry 13 }
|
|
|
|
fmroSruEquipment3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Equipment Alarm in Regenerator in xDSL Path 3
|
|
1 None No Alarm
|
|
10 Alarm Equipment Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroSruEntry 14 }
|
|
|
|
fmroSruEquipment4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
alarm(10),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Equipment Alarm in Regenerator in xDSL Path 4
|
|
1 None No Alarm
|
|
10 Alarm Equipment Alarm present
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroSruEntry 15 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RO CES PW
|
|
--------------------------------------------------------------------------------
|
|
fmroCesPwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmroCesPwEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmro 11 }
|
|
|
|
fmroCesPwEntry OBJECT-TYPE
|
|
SYNTAX FmroCesPwEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmroCesPwPortIndex, fmroCesPwLinkIndex, fmroCesPwIndex }
|
|
::= { fmroCesPwTable 1 }
|
|
|
|
FmroCesPwEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmroCesPwPortIndex INTEGER,
|
|
fmroCesPwLinkIndex INTEGER,
|
|
fmroCesPwIndex INTEGER,
|
|
fmroCesPwTdm INTEGER,
|
|
fmroCesPwEth INTEGER
|
|
}
|
|
|
|
fmroCesPwPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroCesPwEntry 1 }
|
|
|
|
fmroCesPwLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroCesPwEntry 2 }
|
|
|
|
fmroCesPwIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the pseudo wire"
|
|
::= { fmroCesPwEntry 3 }
|
|
|
|
fmroCesPwTdm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ais(7),
|
|
los(9),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm on TDM interface of given pseudo wire:
|
|
1 None No Alarm
|
|
7 AIS Alarm Indication Signal
|
|
9 LOS Loss of Signal
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroCesPwEntry 4 }
|
|
|
|
fmroCesPwEth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
ais(7),
|
|
rai(11),
|
|
are(33),
|
|
lof(34),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm on Ethernet interface of given pseudo wire:
|
|
1 None No Alarm
|
|
7 AIS Alarm Indication Signal
|
|
11 RAI Remote Alarm Indication
|
|
33 ARE Address Resolution Error (no MAC address resolved)
|
|
34 LOF Loss of Frames
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroCesPwEntry 5 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RO CES
|
|
--------------------------------------------------------------------------------
|
|
fmroCesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmroCesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmro 12 }
|
|
|
|
fmroCesEntry OBJECT-TYPE
|
|
SYNTAX FmroCesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmroCesPortIndex, fmroCesLinkIndex }
|
|
::= { fmroCesTable 1 }
|
|
|
|
FmroCesEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmroCesPortIndex INTEGER,
|
|
fmroCesLinkIndex INTEGER,
|
|
fmroCesClockIn INTEGER
|
|
}
|
|
|
|
fmroCesPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroCesEntry 1 }
|
|
|
|
fmroCesLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmroCesEntry 2 }
|
|
|
|
fmroCesClockIn OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
los(9),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm on the CES clock in interface:
|
|
1 None No Alarm
|
|
9 LOS Loss of Signal
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmroCesEntry 3 }
|
|
|
|
--==============================================================================
|
|
--==============================================================================
|
|
--
|
|
-- FM-RW
|
|
--
|
|
--==============================================================================
|
|
--==============================================================================
|
|
fmrw OBJECT IDENTIFIER ::= { linksVers3 4 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW Sub-sections
|
|
--------------------------------------------------------------------------------
|
|
fmrwLoop OBJECT IDENTIFIER ::= { fmrw 1 }
|
|
fmrwMask OBJECT IDENTIFIER ::= { fmrw 2 }
|
|
fmrwTrap OBJECT IDENTIFIER ::= { fmrw 3 }
|
|
-- next line defined below
|
|
-- fmrwThresholdTable OBJECT IDENTIFIER ::= { fmrw 4 }
|
|
--
|
|
fmrwActions OBJECT IDENTIFIER ::= { fmrw 5 }
|
|
fmrwConfig OBJECT IDENTIFIER ::= { fmrw 6 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW Loops local
|
|
--------------------------------------------------------------------------------
|
|
fmrwLoopLocalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwLoopLocalEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwLoop 1 }
|
|
|
|
fmrwLoopLocalEntry OBJECT-TYPE
|
|
SYNTAX FmrwLoopLocalEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwLoopLocalPortIndex, fmrwLoopLocalLinkIndex }
|
|
::= { fmrwLoopLocalTable 1 }
|
|
|
|
FmrwLoopLocalEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwLoopLocalPortIndex INTEGER,
|
|
fmrwLoopLocalLinkIndex INTEGER,
|
|
fmrwLoopLocalLoop3a INTEGER,
|
|
fmrwLoopLocalLoop2b INTEGER,
|
|
fmrwLoopLocalLoop3c INTEGER,
|
|
fmrwLoopLocalLoopReg1A INTEGER,
|
|
fmrwLoopLocalLoopReg2A INTEGER,
|
|
fmrwLoopLocalLoopReg1B INTEGER,
|
|
fmrwLoopLocalLoopReg2B INTEGER,
|
|
fmrwLoopLocalLoop2Reg1A INTEGER,
|
|
fmrwLoopLocalLoop2Reg2A INTEGER,
|
|
fmrwLoopLocalLoop2Reg1B INTEGER,
|
|
fmrwLoopLocalLoop2Reg2B INTEGER,
|
|
fmrwLoopLocalLoopReg31 INTEGER,
|
|
fmrwLoopLocalLoopReg32 INTEGER,
|
|
fmrwLoopLocalLoopReg41 INTEGER,
|
|
fmrwLoopLocalLoopReg42 INTEGER,
|
|
fmrwLoopLocalLoopReg51 INTEGER,
|
|
fmrwLoopLocalLoopReg52 INTEGER,
|
|
fmrwLoopLocalLoopReg61 INTEGER,
|
|
fmrwLoopLocalLoopReg62 INTEGER,
|
|
fmrwLoopLocalLoopReg71 INTEGER,
|
|
fmrwLoopLocalLoopReg72 INTEGER,
|
|
fmrwLoopLocalLoopReg81 INTEGER,
|
|
fmrwLoopLocalLoopReg82 INTEGER,
|
|
fmrwLoopLocalLoop2Reg31 INTEGER,
|
|
fmrwLoopLocalLoop2Reg32 INTEGER,
|
|
fmrwLoopLocalLoop2Reg41 INTEGER,
|
|
fmrwLoopLocalLoop2Reg42 INTEGER,
|
|
fmrwLoopLocalLoop2Reg51 INTEGER,
|
|
fmrwLoopLocalLoop2Reg52 INTEGER,
|
|
fmrwLoopLocalLoop2Reg61 INTEGER,
|
|
fmrwLoopLocalLoop2Reg62 INTEGER,
|
|
fmrwLoopLocalLoop2Reg71 INTEGER,
|
|
fmrwLoopLocalLoop2Reg72 INTEGER,
|
|
fmrwLoopLocalLoop2Reg81 INTEGER,
|
|
fmrwLoopLocalLoop2Reg82 INTEGER,
|
|
fmrwLoopLocalLoopReg13 INTEGER,
|
|
fmrwLoopLocalLoopReg14 INTEGER,
|
|
fmrwLoopLocalLoopReg23 INTEGER,
|
|
fmrwLoopLocalLoopReg24 INTEGER,
|
|
fmrwLoopLocalLoopReg33 INTEGER,
|
|
fmrwLoopLocalLoopReg34 INTEGER,
|
|
fmrwLoopLocalLoopReg43 INTEGER,
|
|
fmrwLoopLocalLoopReg44 INTEGER,
|
|
fmrwLoopLocalLoopReg53 INTEGER,
|
|
fmrwLoopLocalLoopReg54 INTEGER,
|
|
fmrwLoopLocalLoopReg63 INTEGER,
|
|
fmrwLoopLocalLoopReg64 INTEGER,
|
|
fmrwLoopLocalLoopReg73 INTEGER,
|
|
fmrwLoopLocalLoopReg74 INTEGER,
|
|
fmrwLoopLocalLoopReg83 INTEGER,
|
|
fmrwLoopLocalLoopReg84 INTEGER,
|
|
fmrwLoopLocalLoop2Reg13 INTEGER,
|
|
fmrwLoopLocalLoop2Reg14 INTEGER,
|
|
fmrwLoopLocalLoop2Reg23 INTEGER,
|
|
fmrwLoopLocalLoop2Reg24 INTEGER,
|
|
fmrwLoopLocalLoop2Reg33 INTEGER,
|
|
fmrwLoopLocalLoop2Reg34 INTEGER,
|
|
fmrwLoopLocalLoop2Reg43 INTEGER,
|
|
fmrwLoopLocalLoop2Reg44 INTEGER,
|
|
fmrwLoopLocalLoop2Reg53 INTEGER,
|
|
fmrwLoopLocalLoop2Reg54 INTEGER,
|
|
fmrwLoopLocalLoop2Reg63 INTEGER,
|
|
fmrwLoopLocalLoop2Reg64 INTEGER,
|
|
fmrwLoopLocalLoop2Reg73 INTEGER,
|
|
fmrwLoopLocalLoop2Reg74 INTEGER,
|
|
fmrwLoopLocalLoop2Reg83 INTEGER,
|
|
fmrwLoopLocalLoop2Reg84 INTEGER,
|
|
fmrwLoopLocalLoop3a2 INTEGER,
|
|
fmrwLoopLocalLoop3a3 INTEGER,
|
|
fmrwLoopLocalLoop3a4 INTEGER,
|
|
fmrwLoopLocalLoop2b2 INTEGER,
|
|
fmrwLoopLocalLoop2b3 INTEGER,
|
|
fmrwLoopLocalLoop2b4 INTEGER,
|
|
fmrwLoopLocalLoopMcs INTEGER,
|
|
fmrwLoopLocalLoop2bData INTEGER,
|
|
fmrwLoopLocalLoop2bEth INTEGER,
|
|
fmrwLoopLocalLoop2bDataFar INTEGER
|
|
}
|
|
|
|
fmrwLoopLocalPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwLoopLocalEntry 1 }
|
|
|
|
fmrwLoopLocalLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwLoopLocalEntry 2 }
|
|
|
|
fmrwLoopLocalLoop3a OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 3a. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 4 16 DIP Loop command by local switch
|
|
Bit 7 128 Sa6-Bit Loop command by Sa6-bit
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 3 8 TMN_LOCAL Sets/Clears the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopLocalEntry 3 }
|
|
|
|
fmrwLoopLocalLoop2b OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 2b. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 4 16 DIP Loop command by local switch
|
|
Bit 5 32 L140 Loop command by control line 140
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopLocalEntry 4 }
|
|
|
|
fmrwLoopLocalLoop3c OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 3c. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 4 16 DIP Loop command by local switch
|
|
Bit 6 64 L141 Loop command by control line 141
|
|
Bit 7 128 Sa6-Bit Loop command by Sa6-bit
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopLocalEntry 5 }
|
|
|
|
fmrwLoopLocalLoopReg1A OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 1 (first section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 6 }
|
|
|
|
fmrwLoopLocalLoopReg2A OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 2 (first section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 7 }
|
|
|
|
fmrwLoopLocalLoopReg1B OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 1 (second section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 8 }
|
|
|
|
fmrwLoopLocalLoopReg2B OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 2 (second section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 9 }
|
|
|
|
fmrwLoopLocalLoop2Reg1A OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 1 (first section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 10 }
|
|
|
|
fmrwLoopLocalLoop2Reg2A OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 2 (first section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 11 }
|
|
|
|
fmrwLoopLocalLoop2Reg1B OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 1 (second section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 12 }
|
|
|
|
fmrwLoopLocalLoop2Reg2B OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 2 (second section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 13 }
|
|
|
|
fmrwLoopLocalLoopReg31 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 1 (third section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 14 }
|
|
|
|
fmrwLoopLocalLoopReg32 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 2 (third section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 15 }
|
|
|
|
fmrwLoopLocalLoopReg41 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 1 (fourth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 16 }
|
|
|
|
fmrwLoopLocalLoopReg42 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 2 (fourth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 17 }
|
|
|
|
fmrwLoopLocalLoopReg51 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 1 (fifth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 18 }
|
|
|
|
fmrwLoopLocalLoopReg52 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 2 (fifth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 19 }
|
|
|
|
fmrwLoopLocalLoopReg61 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 1 (sixth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 20 }
|
|
|
|
fmrwLoopLocalLoopReg62 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 2 (sixth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 21 }
|
|
|
|
fmrwLoopLocalLoopReg71 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 1 (seventh section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 22 }
|
|
|
|
fmrwLoopLocalLoopReg72 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 2 (seventh section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 23 }
|
|
|
|
fmrwLoopLocalLoopReg81 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 1 (eighth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 24 }
|
|
|
|
fmrwLoopLocalLoopReg82 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 2 (eighth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 25 }
|
|
|
|
fmrwLoopLocalLoop2Reg31 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 1 (third section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 26 }
|
|
|
|
fmrwLoopLocalLoop2Reg32 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 2 (third section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 27 }
|
|
|
|
fmrwLoopLocalLoop2Reg41 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 1 (fourth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 28 }
|
|
|
|
fmrwLoopLocalLoop2Reg42 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 2 (fourth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 29 }
|
|
|
|
fmrwLoopLocalLoop2Reg51 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 1 (fifth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 30 }
|
|
|
|
fmrwLoopLocalLoop2Reg52 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 2 (fifth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 31 }
|
|
|
|
fmrwLoopLocalLoop2Reg61 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 1 (sixth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 32 }
|
|
|
|
fmrwLoopLocalLoop2Reg62 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 2 (sixth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 33 }
|
|
|
|
fmrwLoopLocalLoop2Reg71 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 1 (seventh section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 34 }
|
|
|
|
fmrwLoopLocalLoop2Reg72 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 2 (seventh section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 35 }
|
|
|
|
fmrwLoopLocalLoop2Reg81 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 1 (eigtht section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 36 }
|
|
|
|
fmrwLoopLocalLoop2Reg82 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 2 (eighth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 37 }
|
|
|
|
fmrwLoopLocalLoopReg13 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 3 (first section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 38 }
|
|
|
|
fmrwLoopLocalLoopReg14 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 4 (first section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 39 }
|
|
|
|
fmrwLoopLocalLoopReg23 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 3 (second section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 40 }
|
|
|
|
fmrwLoopLocalLoopReg24 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 4 (second section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 41 }
|
|
|
|
fmrwLoopLocalLoopReg33 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 3 (third section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 42 }
|
|
|
|
fmrwLoopLocalLoopReg34 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 4 (third section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 43 }
|
|
|
|
fmrwLoopLocalLoopReg43 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 3 (fourth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 44 }
|
|
|
|
fmrwLoopLocalLoopReg44 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 4 (fourth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 45 }
|
|
|
|
fmrwLoopLocalLoopReg53 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 3 (fifth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 46 }
|
|
|
|
fmrwLoopLocalLoopReg54 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 4 (fifth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 47 }
|
|
|
|
fmrwLoopLocalLoopReg63 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 3 (sixth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 48 }
|
|
|
|
fmrwLoopLocalLoopReg64 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 4 (sixth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 49 }
|
|
|
|
fmrwLoopLocalLoopReg73 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 3 (seventh section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 50 }
|
|
|
|
fmrwLoopLocalLoopReg74 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 4 (seventh section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 51 }
|
|
|
|
fmrwLoopLocalLoopReg83 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 3 (eighth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 52 }
|
|
|
|
fmrwLoopLocalLoopReg84 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop in wire pair 4 (eighth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 53 }
|
|
|
|
fmrwLoopLocalLoop2Reg13 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 3 (first section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 54 }
|
|
|
|
fmrwLoopLocalLoop2Reg14 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 4 (first section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 55 }
|
|
|
|
fmrwLoopLocalLoop2Reg23 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 3 (second section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 56 }
|
|
|
|
fmrwLoopLocalLoop2Reg24 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 4 (second section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 57 }
|
|
|
|
fmrwLoopLocalLoop2Reg33 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 3 (third section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 58 }
|
|
|
|
fmrwLoopLocalLoop2Reg34 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 4 (third section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 59 }
|
|
|
|
fmrwLoopLocalLoop2Reg43 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 3 (fourth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 60 }
|
|
|
|
fmrwLoopLocalLoop2Reg44 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 4 (fourth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 61 }
|
|
|
|
fmrwLoopLocalLoop2Reg53 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 3 (fifth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 62 }
|
|
|
|
fmrwLoopLocalLoop2Reg54 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 4 (fifth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 63 }
|
|
|
|
fmrwLoopLocalLoop2Reg63 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 3 (sixth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 64 }
|
|
|
|
fmrwLoopLocalLoop2Reg64 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 4 (sixth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 65 }
|
|
|
|
fmrwLoopLocalLoop2Reg73 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 3 (seventh section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 66 }
|
|
|
|
fmrwLoopLocalLoop2Reg74 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 4 (seventh section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 67 }
|
|
|
|
fmrwLoopLocalLoop2Reg83 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 3 (eigtht section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 68 }
|
|
|
|
fmrwLoopLocalLoop2Reg84 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Regenerator Loop 2 in wire pair 4 (eighth section).
|
|
The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bit 1
|
|
shows whether the loop command has been issued by the management system.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop on the Regenerator"
|
|
::= { fmrwLoopLocalEntry 69 }
|
|
|
|
fmrwLoopLocalLoop3a2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 3a2. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 4 16 DIP Loop command by local switch
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 3 8 TMN_LOCAL Sets/Clears the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopLocalEntry 70 }
|
|
|
|
fmrwLoopLocalLoop3a3 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 3a3. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 4 16 DIP Loop command by local switch
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 3 8 TMN_LOCAL Sets/Clears the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopLocalEntry 71 }
|
|
|
|
fmrwLoopLocalLoop3a4 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 3a4. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 4 16 DIP Loop command by local switch
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 3 8 TMN_LOCAL Sets/Clears the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopLocalEntry 72 }
|
|
|
|
fmrwLoopLocalLoop2b2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 2b2. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopLocalEntry 73 }
|
|
|
|
fmrwLoopLocalLoop2b3 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 2b3. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopLocalEntry 74 }
|
|
|
|
fmrwLoopLocalLoop2b4 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 2b4. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopLocalEntry 75 }
|
|
|
|
fmrwLoopLocalLoopMcs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2047)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of MCS Loop. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 8 256 unknown value (ignore other bits)
|
|
Bit 9 512 unsupported variable for addressed device (ignore other bits)
|
|
Bit 10 1024 MCS Loop command by MCS
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7 and 10
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopLocalEntry 76 }
|
|
|
|
fmrwLoopLocalLoop2bData OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 2bData. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopLocalEntry 77 }
|
|
|
|
fmrwLoopLocalLoop2bEth OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 2bEth. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopLocalEntry 78 }
|
|
|
|
fmrwLoopLocalLoop2bDataFar OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 2bDataFar. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopLocalEntry 79 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW Loops far
|
|
--------------------------------------------------------------------------------
|
|
fmrwLoopFarTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwLoopFarEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwLoop 2 }
|
|
|
|
fmrwLoopFarEntry OBJECT-TYPE
|
|
SYNTAX FmrwLoopFarEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwLoopFarPortIndex, fmrwLoopFarLinkIndex }
|
|
::= { fmrwLoopFarTable 1 }
|
|
|
|
FmrwLoopFarEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwLoopFarPortIndex INTEGER,
|
|
fmrwLoopFarLinkIndex INTEGER,
|
|
fmrwLoopFarLoop3a INTEGER,
|
|
fmrwLoopFarLoop2b INTEGER,
|
|
fmrwLoopFarLoop3c INTEGER,
|
|
fmrwLoopFarLoop2bSlave INTEGER,
|
|
fmrwLoopFarLoop2b2 INTEGER,
|
|
fmrwLoopFarLoop2b3 INTEGER,
|
|
fmrwLoopFarLoop2b4 INTEGER,
|
|
fmrwLoopFarLoopMcs INTEGER,
|
|
fmrwLoopFarLoop2bData INTEGER,
|
|
fmrwLoopFarLoop2bEth INTEGER,
|
|
fmrwLoopFarLoop2bDataFar INTEGER
|
|
}
|
|
|
|
fmrwLoopFarPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwLoopFarEntry 1 }
|
|
|
|
fmrwLoopFarLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwLoopFarEntry 2 }
|
|
|
|
fmrwLoopFarLoop3a OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 3a. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 4 16 DIP Loop command by local switch
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 4 EOC_TMN Sets the Loop on the NT
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopFarEntry 3 }
|
|
|
|
fmrwLoopFarLoop2b OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 2b. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 2 4 EOC_DIP Loop command via EOC by switch
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 4 16 DIP Loop command by local switch
|
|
Bit 5 32 L140 Loop command by control line 140
|
|
Bit 7 128 Sa6-Bit Loop command by Sa6-bit
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 4 EOC_TMN Sets the Loop on the NT
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopFarEntry 4 }
|
|
|
|
fmrwLoopFarLoop3c OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 3c. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 4 16 DIP Loop command by local switch
|
|
Bit 6 64 L141 Loop command by control line 141
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 4 EOC_TMN Sets the Loop on the NT
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopFarEntry 5 }
|
|
|
|
fmrwLoopFarLoop2bSlave OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 2b on the slave device. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 3 8 TMN_LOCAL Loop command via EOC by management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 2 EOC_TMN Sets the Loop 2b on the slave device"
|
|
::= { fmrwLoopFarEntry 6 }
|
|
|
|
fmrwLoopFarLoop2b2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 2b2. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 4 EOC_TMN Sets the Loop on the NT
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopFarEntry 7 }
|
|
|
|
fmrwLoopFarLoop2b3 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 2b3. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 4 EOC_TMN Sets the Loop on the NT
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopFarEntry 8 }
|
|
|
|
fmrwLoopFarLoop2b4 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 2b4. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 4 EOC_TMN Sets the Loop on the NT
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopFarEntry 9 }
|
|
|
|
fmrwLoopFarLoopMcs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2047)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of MCS Loop. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 2 4 EOC_DIP Loop command via EOC by switch
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 4 16 DIP Loop command by local switch
|
|
Bit 8 256 unknown value (ignore other bits)
|
|
Bit 9 512 unsupported variable for addressed device (ignore other bits)
|
|
Bit 10 1024 MCS Loop command by MCS
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7 and 10
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 4 EOC_TMN Sets the Loop on the NT
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopFarEntry 19 }
|
|
|
|
fmrwLoopFarLoop2bData OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 2bData. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 4 EOC_TMN Sets the Loop on the NT
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopFarEntry 20 }
|
|
|
|
fmrwLoopFarLoop2bEth OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 2bEth. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 4 EOC_TMN Sets the Loop on the NT
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopFarEntry 21 }
|
|
|
|
fmrwLoopFarLoop2bDataFar OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1023)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Loop 2bDataFar. The readable value is bit coded as follows:
|
|
Bit 0 1 STATE physical loop state
|
|
Bit 1 2 EOC_TMN Loop command via EOC by management
|
|
Bit 3 8 TMN_LOCAL Loop command by local management
|
|
Bit 8 256 unknown value (ignore bits 0-7)
|
|
Bit 9 512 unsupported variable for addressed device (ignore bits 0-7)
|
|
|
|
The STATE bit shows whether the loop is currently active or not. Bits 2-7
|
|
show which sources have issued the loop command. If at least one of them is
|
|
active, the device will try to set the loop.
|
|
For some modes of operation or with certain combinations of modules some
|
|
loop sources might not be available.
|
|
|
|
When setting a loop, the following applies:
|
|
Bit 1 4 EOC_TMN Sets the Loop on the NT
|
|
Bit 3 8 TMN_LOCAL Sets the Loop on the LT or the NT Local"
|
|
::= { fmrwLoopFarEntry 22 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW Loop Config
|
|
--------------------------------------------------------------------------------
|
|
fmrwLoopConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwLoopConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwLoop 3 }
|
|
|
|
fmrwLoopConfigEntry OBJECT-TYPE
|
|
SYNTAX FmrwLoopConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwLoopConfigPortIndex, fmrwLoopConfigLinkIndex }
|
|
::= { fmrwLoopConfigTable 1 }
|
|
|
|
FmrwLoopConfigEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwLoopConfigPortIndex INTEGER,
|
|
fmrwLoopConfigLinkIndex INTEGER,
|
|
fmrwLoopConfigAllowRbertLoop INTEGER,
|
|
fmrwLoopConfigTransparentLoops INTEGER
|
|
}
|
|
|
|
fmrwLoopConfigPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwLoopConfigEntry 1 }
|
|
|
|
fmrwLoopConfigLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwLoopConfigEntry 2 }
|
|
|
|
fmrwLoopConfigAllowRbertLoop OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notAllowed(1),
|
|
allowed(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies whether a remote MCS-equipped unit is allowd to
|
|
activate an MCS loop on this line or not.
|
|
1 Not Allowed MCS loop activation by management only
|
|
2 Allowed MCS loop activation by MCS bit pattern allowed
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwLoopConfigEntry 3 }
|
|
|
|
fmrwLoopConfigTransparentLoops OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nonTransparent(1),
|
|
transparent(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies whether the loops are configured transparent or not.
|
|
1 Non Transparent The loops are configured as non transparent
|
|
2 Transparent The loops are configured as transparent
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwLoopConfigEntry 4 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW Htu Lt Mask
|
|
--------------------------------------------------------------------------------
|
|
fmrwHtuLtMaskTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwHtuLtMaskEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwMask 1 }
|
|
|
|
fmrwHtuLtMaskEntry OBJECT-TYPE
|
|
SYNTAX FmrwHtuLtMaskEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwHtuLtMaskPortIndex, fmrwHtuLtMaskLinkIndex }
|
|
::= { fmrwHtuLtMaskTable 1 }
|
|
|
|
FmrwHtuLtMaskEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwHtuLtMaskPortIndex INTEGER,
|
|
fmrwHtuLtMaskLinkIndex INTEGER,
|
|
fmrwHtuLtMask OCTET STRING,
|
|
fmrwStuLtMask OCTET STRING,
|
|
fmrwStu4LtMask OCTET STRING
|
|
}
|
|
|
|
fmrwHtuLtMaskPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwHtuLtMaskEntry 1 }
|
|
|
|
fmrwHtuLtMaskLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwHtuLtMaskEntry 2 }
|
|
|
|
fmrwHtuLtMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(9))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm Severity Mask and Alarm Suppression Mask for LT Alarms.
|
|
|
|
This variable only returns meaningful values if the management
|
|
system is connected to an LT device. If it is connected to an
|
|
NT device on the local interface, this variable will return
|
|
'NotLt' as result.
|
|
|
|
This variable is an 8 byte octet string. Bytes 0-3 contain the
|
|
alarm suppression mask, bytes 4-7 contain the severity map.
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarms are coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 4
|
|
bit 0 bit 0 LOS-U
|
|
bit 1 bit 1 LFA-U
|
|
bit 2 bit 2 AIS-U
|
|
bit 3 bit 3 HPO-U
|
|
bit 4 bit 4 FPO-U
|
|
bit 5 bit 5 RAI-U
|
|
bit 6 bit 6 BER3-U
|
|
bit 7 bit 7 BER6-U
|
|
Byte 1 Byte 5
|
|
bit 0 bit 0 LOS-U1
|
|
bit 1 bit 1 BER3-U1
|
|
bit 2 bit 2 BER6-U1
|
|
bit 3 bit 3 LOS-U2
|
|
bit 4 bit 4 BER3-U2
|
|
bit 5 bit 5 BER6-U2
|
|
bit 6 bit 6 LOS-T
|
|
bit 7 bit 7 LFA-T
|
|
Byte 2 Byte 6
|
|
bit 0 bit 0 AIS-T
|
|
bit 1 bit 1 RAI-T
|
|
bit 2 bit 2 BER3-T
|
|
bit 3 bit 3 BER6-T
|
|
bit 4 bit 4 LOAR-D
|
|
bit 5 bit 5 LOAT-D
|
|
bit 6 bit 6 Equipment
|
|
bit 7 bit 7 A-LOS
|
|
Byte 3 Byte 7
|
|
bit 0 bit 0 LOS-T3
|
|
bit 1 bit 1 A-RTA
|
|
bit 2 bit 2 Powerfail
|
|
bit 3 bit 3 unused
|
|
bit 4 bit 4 unused
|
|
bit 5 bit 5 unused
|
|
bit 6 bit 6 unused
|
|
bit 7 bit 7 unused
|
|
|
|
Byte 8 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
2 NotLt The local device is not an LT
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwHtuLtMaskEntry 3 }
|
|
|
|
fmrwStuLtMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(11))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm Severity Mask and Alarm Suppression Mask for LT Alarms.
|
|
|
|
This variable only returns meaningful values if the management
|
|
system is connected to an LT device. If it is connected to an
|
|
NT device on the local interface, this variable will return
|
|
'NotLt' as result.
|
|
|
|
This variable is an 10 byte octet string. Bytes 0-4 contain the
|
|
alarm suppression mask, bytes 5-9 contain the severity map.
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarms are coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 5
|
|
bit 0 bit 0 LOS-U
|
|
bit 1 bit 1 LFA-U
|
|
bit 2 bit 2 AIS-U
|
|
bit 3 bit 3 HPO-U
|
|
bit 4 bit 4 FPO-U
|
|
bit 5 bit 5 RAI-U
|
|
bit 6 bit 6 BER3-U
|
|
bit 7 bit 7 BER6-U
|
|
Byte 1 Byte 6
|
|
bit 0 bit 0 LOS-U1
|
|
bit 1 bit 1 BER3-U1
|
|
bit 2 bit 2 BER6-U1
|
|
bit 3 bit 3 LOS-U2
|
|
bit 4 bit 4 BER3-U2
|
|
bit 5 bit 5 BER6-U2
|
|
bit 6 bit 6 LOS-T
|
|
bit 7 bit 7 LFA-T
|
|
Byte 2 Byte 7
|
|
bit 0 bit 0 AIS-T
|
|
bit 1 bit 1 RAI-T
|
|
bit 2 bit 2 BER3-T
|
|
bit 3 bit 3 BER6-T
|
|
bit 4 bit 4 LOAR-D
|
|
bit 5 bit 5 LOAT-D
|
|
bit 6 bit 6 Equipment
|
|
bit 7 bit 7 A-LOS
|
|
Byte 3 Byte 8
|
|
bit 0 bit 0 LOS-T3
|
|
bit 1 bit 1 A-RTA
|
|
bit 2 bit 2 Powerfail
|
|
bit 3 bit 3 U-Bandwidth unavailable
|
|
bit 4 bit 4 LOSW-U1
|
|
bit 5 bit 5 LOSW-U2
|
|
bit 6 bit 6 Powerfail CPE
|
|
bit 7 bit 7 TD-ATT-U1
|
|
Byte 4 Byte 9
|
|
bit 0 bit 0 TD-SNR-U1
|
|
bit 1 bit 1 TD-ATT-U2
|
|
bit 2 bit 2 TD-SNR-U2
|
|
bit 3 bit 3 reserved
|
|
bit 4 bit 4 reserved
|
|
bit 5 bit 5 XFW
|
|
bit 6 bit 6 unused
|
|
bit 7 bit 7 unused
|
|
|
|
Byte 10 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
2 NotLt The local device is not an LT
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwHtuLtMaskEntry 4 }
|
|
|
|
fmrwStu4LtMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(9))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm Severity Mask and Alarm Suppression Mask for LT Alarms.
|
|
|
|
This variable only returns meaningful values if the management
|
|
system is connected to an LT device. If it is connected to an
|
|
NT device on the local interface, this variable will return
|
|
'NotLt' as result.
|
|
|
|
This variable is an 8 byte octet string. Bytes 0-3 contain the
|
|
alarm suppression mask, bytes 4-7 contain the severity map.
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarms are coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 4
|
|
bit 0 bit 0 LOS-U1
|
|
bit 1 bit 1 BER3-U1
|
|
bit 2 bit 2 BER6-U1
|
|
bit 3 bit 3 LOSW-U1
|
|
bit 4 bit 4 LOS-V_A
|
|
bit 5 bit 5 LFA-V_A
|
|
bit 6 bit 6 AIS-V_A
|
|
bit 7 bit 7 RAI-V_A
|
|
Byte 1 Byte 5
|
|
bit 0 bit 0 BER3-V_A
|
|
bit 1 bit 1 BER6-V_A
|
|
bit 2 bit 2 LOAR-WAN
|
|
bit 3 bit 3 LOAT-WAN
|
|
bit 4 bit 4 MIR-WAN
|
|
bit 5 bit 5 LINKDOWN-P1
|
|
bit 6 bit 6 Equipment
|
|
bit 7 bit 7 A-LOS
|
|
Byte 2 Byte 6
|
|
bit 0 bit 0 Powerfail CPE
|
|
bit 1 bit 1 TD-ATT-U1
|
|
bit 2 bit 2 TD-SNR-U1
|
|
bit 3 bit 3 LOM-MCSx
|
|
bit 4 bit 4 BER3-MCSx
|
|
bit 5 bit 5 BER6-MCSx
|
|
bit 6 bit 6 LOM-FARMCSx
|
|
bit 7 bit 7 LOM
|
|
Byte 3 Byte 7
|
|
bit 0 bit 0 PLOM
|
|
bit 1 bit 1 LOS-T3
|
|
bit 2 bit 2 Powerfail
|
|
bit 3 bit 3 XFW
|
|
bit 4 bit 4
|
|
bit 5 bit 5
|
|
bit 6 bit 6
|
|
bit 7 bit 7
|
|
|
|
Byte 8 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
2 NotLt The local device is not an LT
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwHtuLtMaskEntry 5 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW HtuNt Local Mask
|
|
--------------------------------------------------------------------------------
|
|
fmrwHtuNtMaskTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwHtuNtMaskEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwMask 2 }
|
|
|
|
fmrwHtuNtMaskEntry OBJECT-TYPE
|
|
SYNTAX FmrwHtuNtMaskEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwHtuNtMaskPortIndex, fmrwHtuNtMaskLinkIndex }
|
|
::= { fmrwHtuNtMaskTable 1 }
|
|
|
|
FmrwHtuNtMaskEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwHtuNtMaskPortIndex INTEGER,
|
|
fmrwHtuNtMaskLinkIndex INTEGER,
|
|
fmrwHtuNtMask OCTET STRING,
|
|
fmrwStuNtMask OCTET STRING,
|
|
fmrwStu4NtMask OCTET STRING
|
|
}
|
|
|
|
fmrwHtuNtMaskPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwHtuNtMaskEntry 1 }
|
|
|
|
fmrwHtuNtMaskLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwHtuNtMaskEntry 2 }
|
|
|
|
fmrwHtuNtMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(9))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm Severity Mask and Alarm Suppression Mask for NT Alarms.
|
|
|
|
This variable is an 8 byte octet string. Bytes 0-3 contain the
|
|
alarm suppression mask, bytes 4-7 contain the severity map.
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarms are coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 4
|
|
bit 0 bit 0 LOS-U
|
|
bit 1 bit 1 LFA-U
|
|
bit 2 bit 2 AIS-U
|
|
bit 3 bit 3 HPO-U
|
|
bit 4 bit 4 FPO-U
|
|
bit 5 bit 5 RAI-U
|
|
bit 6 bit 6 BER3-U
|
|
bit 7 bit 7 BER6-U
|
|
Byte 1 Byte 5
|
|
bit 0 bit 0 LOS-U1
|
|
bit 1 bit 1 BER3-U1
|
|
bit 2 bit 2 BER6-U1
|
|
bit 3 bit 3 LOS-U2
|
|
bit 4 bit 4 BER3-U2
|
|
bit 5 bit 5 BER6-U2
|
|
bit 6 bit 6 LOS-T
|
|
bit 7 bit 7 LFA-T
|
|
Byte 2 Byte 6
|
|
bit 0 bit 0 AIS-T
|
|
bit 1 bit 1 RAI-T
|
|
bit 2 bit 2 BER3-T
|
|
bit 3 bit 3 BER6-T
|
|
bit 4 bit 4 LOAR-D
|
|
bit 5 bit 5 LOAT-D
|
|
bit 6 bit 6 Equipment
|
|
bit 7 bit 7 A-LOS
|
|
Byte 3 Byte 7
|
|
bit 0 bit 0 LOS-T4
|
|
bit 1 bit 1 unused
|
|
bit 2 bit 2 unused
|
|
bit 3 bit 3 unused
|
|
bit 4 bit 4 unused
|
|
bit 5 bit 5 unused
|
|
bit 6 bit 6 unused
|
|
bit 7 bit 7 unused
|
|
|
|
Byte 8 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwHtuNtMaskEntry 3 }
|
|
|
|
fmrwStuNtMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(11))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm Severity Mask and Alarm Suppression Mask for NT Alarms.
|
|
|
|
This variable is an 10 byte octet string. Bytes 0-4 contain the
|
|
alarm suppression mask, bytes 5-9 contain the severity map.
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarms are coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 5
|
|
bit 0 bit 0 LOS-U
|
|
bit 1 bit 1 LFA-U
|
|
bit 2 bit 2 AIS-U
|
|
bit 3 bit 3 HPO-U
|
|
bit 4 bit 4 FPO-U
|
|
bit 5 bit 5 RAI-U
|
|
bit 6 bit 6 BER3-U
|
|
bit 7 bit 7 BER6-U
|
|
Byte 1 Byte 6
|
|
bit 0 bit 0 LOS-U1
|
|
bit 1 bit 1 BER3-U1
|
|
bit 2 bit 2 BER6-U1
|
|
bit 3 bit 3 LOS-U2
|
|
bit 4 bit 4 BER3-U2
|
|
bit 5 bit 5 BER6-U2
|
|
bit 6 bit 6 LOS-T
|
|
bit 7 bit 7 LFA-T
|
|
Byte 2 Byte 7
|
|
bit 0 bit 0 AIS-T
|
|
bit 1 bit 1 RAI-T
|
|
bit 2 bit 2 BER3-T
|
|
bit 3 bit 3 BER6-T
|
|
bit 4 bit 4 LOAR-D
|
|
bit 5 bit 5 LOAT-D
|
|
bit 6 bit 6 Equipment
|
|
bit 7 bit 7 A-LOS
|
|
Byte 3 Byte 8
|
|
bit 0 bit 0 LOS-T4
|
|
bit 1 bit 1 U-Bandwidth unavailable
|
|
bit 2 bit 2 LOSW-U1
|
|
bit 3 bit 3 LOSW-U2
|
|
bit 4 bit 4 Powerfail CPE
|
|
bit 5 bit 5 TD-ATT-U1
|
|
bit 6 bit 6 TD-SNR-U1
|
|
bit 7 bit 7 TD-ATT-U2
|
|
Byte 4 Byte 9
|
|
bit 0 bit 0 TD-SNR-U2
|
|
bit 1 bit 1 unused
|
|
bit 2 bit 2 unused
|
|
bit 3 bit 3 unused
|
|
bit 4 bit 4 unused
|
|
bit 5 bit 5 unused
|
|
bit 6 bit 6 unused
|
|
bit 7 bit 7 unused
|
|
|
|
Byte 10 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwHtuNtMaskEntry 4 }
|
|
|
|
fmrwStu4NtMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(9))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm Severity Mask and Alarm Suppression Mask for NT Alarms.
|
|
|
|
This variable only returns meaningful values if the management
|
|
system is connected to an LT device. If it is connected to an
|
|
NT device on the local interface, this variable will return
|
|
'NotLt' as result.
|
|
|
|
This variable is an 8 byte octet string. Bytes 0-3 contain the
|
|
alarm suppression mask, bytes 4-7 contain the severity map.
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarms are coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 4
|
|
bit 0 bit 0 LOS-U1
|
|
bit 1 bit 1 BER3-U1
|
|
bit 2 bit 2 BER6-U1
|
|
bit 3 bit 3 LOSW-U1
|
|
bit 4 bit 4 LOS-V_A
|
|
bit 5 bit 5 LFA-V_A
|
|
bit 6 bit 6 AIS-V_A
|
|
bit 7 bit 7 RAI-V_A
|
|
Byte 1 Byte 5
|
|
bit 0 bit 0 BER3-V_A
|
|
bit 1 bit 1 BER6-V_A
|
|
bit 2 bit 2 LOAR-WAN
|
|
bit 3 bit 3 LOAT-WAN
|
|
bit 4 bit 4 MIR-WAN
|
|
bit 5 bit 5 LINKDOWN-P1
|
|
bit 6 bit 6 Equipment
|
|
bit 7 bit 7 A-LOS
|
|
Byte 2 Byte 6
|
|
bit 0 bit 0 TD-ATT-U1
|
|
bit 1 bit 1 TD-SNR-U1
|
|
bit 2 bit 2 LOM-MCSx
|
|
bit 3 bit 3 BER3-MCSx
|
|
bit 4 bit 4 BER6-MCSx
|
|
bit 5 bit 5 LOM-FARMCSx
|
|
bit 6 bit 6 LOM
|
|
bit 7 bit 7 PLOM
|
|
Byte 3 Byte 7
|
|
bit 0 bit 0 Powerfail
|
|
bit 1 bit 1
|
|
bit 2 bit 2
|
|
bit 3 bit 3
|
|
bit 4 bit 4
|
|
bit 5 bit 5
|
|
bit 6 bit 6
|
|
bit 7 bit 7
|
|
|
|
Byte 8 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwHtuNtMaskEntry 5 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW Rps Mask
|
|
--------------------------------------------------------------------------------
|
|
fmrwRpsMaskTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwRpsMaskEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwMask 4 }
|
|
|
|
fmrwRpsMaskEntry OBJECT-TYPE
|
|
SYNTAX FmrwRpsMaskEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwRpsMaskPortIndex, fmrwRpsMaskLinkIndex }
|
|
::= { fmrwRpsMaskTable 1 }
|
|
|
|
FmrwRpsMaskEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwRpsMaskPortIndex INTEGER,
|
|
fmrwRpsMaskLinkIndex INTEGER,
|
|
fmrwRpsMask OCTET STRING
|
|
}
|
|
|
|
fmrwRpsMaskPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwRpsMaskEntry 1 }
|
|
|
|
fmrwRpsMaskLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwRpsMaskEntry 2 }
|
|
|
|
fmrwRpsMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(3))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm Severity Mask and Alarm Suppression Mask for Remote Power Supply (RPS).
|
|
|
|
This variable only returns meaningful values if the management
|
|
system is connected to an LT device. If it is connected to an
|
|
NT device on the local interface, this variable will return
|
|
'NotLt' as result.
|
|
|
|
This variable is an 2 byte octet string. Byte 0 contains the
|
|
alarm suppression mask, byte 1 contains the severity map.
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarms are coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 1
|
|
bit 0 bit 0 UCR12
|
|
bit 1 bit 1 UCR1
|
|
bit 2 bit 2 UCR2
|
|
bit 3 bit 3 OVR
|
|
bit 4 bit 4 NOSYM
|
|
bit 5 bit 5 DEFECT
|
|
bit 6 bit 6 unused
|
|
bit 7 bit 7 unused
|
|
|
|
Byte 2 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
2 NotLt The local device is not an LT
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwRpsMaskEntry 3 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW Regen Section A Mask
|
|
--------------------------------------------------------------------------------
|
|
fmrwRegAMaskTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwRegAMaskEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwMask 5 }
|
|
|
|
fmrwRegAMaskEntry OBJECT-TYPE
|
|
SYNTAX FmrwRegAMaskEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwRegAMaskPortIndex, fmrwRegAMaskLinkIndex }
|
|
::= { fmrwRegAMaskTable 1 }
|
|
|
|
FmrwRegAMaskEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwRegAMaskPortIndex INTEGER,
|
|
fmrwRegAMaskLinkIndex INTEGER,
|
|
fmrwRegAMask OCTET STRING
|
|
}
|
|
|
|
fmrwRegAMaskPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwRegAMaskEntry 1 }
|
|
|
|
fmrwRegAMaskLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwRegAMaskEntry 2 }
|
|
|
|
fmrwRegAMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(5))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm Severity Mask and Alarm Suppression Mask for Regenerator Section A (LT side).
|
|
|
|
This variable only returns meaningful values if the management
|
|
system is connected to an LT device. If it is connected to an
|
|
NT device on the local interface, this variable will return
|
|
'NotLt' as result.
|
|
|
|
This variable is a 4 byte octet string. Bytes 0-1 contain the
|
|
alarm suppression mask, bytes 2-3 contain the severity map.
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarms are coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 2
|
|
bit 0 bit 0 LOS-R1L
|
|
bit 1 bit 1 BER3-R1L
|
|
bit 2 bit 2 BER6-R1L
|
|
bit 3 bit 3 LOS-R2L
|
|
bit 4 bit 4 BER3-R2L
|
|
bit 5 bit 5 BER6-R2L
|
|
bit 6 bit 6 LOS-R1N
|
|
bit 7 bit 7 BER3-R1N
|
|
Byte 1 Byte 3
|
|
bit 0 bit 0 BER6-R1N
|
|
bit 1 bit 1 LOS-R2N
|
|
bit 2 bit 2 BER3-R2N
|
|
bit 3 bit 3 BER6-R2N
|
|
bit 4 bit 4 Equipment1
|
|
bit 5 bit 5 Equipment2
|
|
bit 6 bit 6 unused
|
|
bit 7 bit 7 unused
|
|
|
|
Byte 4 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
2 NotLt The local device is not an LT
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwRegAMaskEntry 3 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW OMI Mask
|
|
--------------------------------------------------------------------------------
|
|
fmrwOmiMaskTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwOmiMaskEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwMask 7 }
|
|
|
|
fmrwOmiMaskEntry OBJECT-TYPE
|
|
SYNTAX FmrwOmiMaskEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwOmiMaskPortIndex }
|
|
::= { fmrwOmiMaskTable 1 }
|
|
|
|
FmrwOmiMaskEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwOmiMaskPortIndex INTEGER,
|
|
fmrwOmiMask OCTET STRING,
|
|
fmrwOmiExtInputMask OCTET STRING,
|
|
fmrwOmiNMSMask OCTET STRING,
|
|
fmrwOmiFEMask OCTET STRING,
|
|
fmrwOmiGBEMask OCTET STRING,
|
|
fmrwOmiSFPMask OCTET STRING,
|
|
fmrwOmiOutputMask INTEGER,
|
|
fmrwOmiCESMask OCTET STRING
|
|
}
|
|
|
|
fmrwOmiMaskPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwOmiMaskEntry 1 }
|
|
|
|
fmrwOmiMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(3))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm Severity Mask and Alarm Suppression Mask for the OMI card.
|
|
|
|
This variable is a 2 byte octet string. Byte 0 contains the
|
|
alarm suppression mask, byte 1 contains the severity map.
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarms are coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 1
|
|
bit 0 bit 0 BAT1
|
|
bit 1 bit 1 BAT2
|
|
bit 2 bit 2 AUX BAT MCU
|
|
bit 3 bit 3 unused
|
|
bit 4 bit 4 unused
|
|
bit 5 bit 5 unused
|
|
bit 6 bit 6 unused
|
|
bit 7 bit 7 unused
|
|
|
|
Byte 2 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwOmiMaskEntry 2 }
|
|
|
|
fmrwOmiExtInputMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(3))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"External input alarm Severity and Suppression Mask for the MCU card.
|
|
|
|
Byte 0 alarm suppression mask, (bit coded: 0=masked 1= no masked)
|
|
Byte 1 alarm severity map (bit coded: 0=not urgent, 1=urgent)
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarm mask is bit coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 1
|
|
bit 0 bit 0 EXTERNAL INPUT 1
|
|
bit 1 bit 1 EXTERNAL INPUT 2
|
|
bit 2 bit 2 EXTERNAL INPUT 3
|
|
bit 3 bit 3 EXTERNAL INPUT 4
|
|
bit 4 bit 4 unused
|
|
bit 5 bit 5 unused
|
|
bit 6 bit 6 unused
|
|
bit 7 bit 7 unused
|
|
|
|
Byte 2 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwOmiMaskEntry 3 }
|
|
|
|
fmrwOmiNMSMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(3))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"NMS link alarm Severity and Suppression Mask for the MCU card.
|
|
|
|
Byte 0 alarm suppression mask, (bit coded: 0=masked 1= no masked)
|
|
Byte 1 alarm severity map (bit coded: 0=not urgent, 1=urgent)
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarm mask is bit coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 1
|
|
bit 0 bit 0 NMS LINK ALARM
|
|
bit 1 bit 1 unused
|
|
bit 2 bit 2 unused
|
|
bit 3 bit 3 unused
|
|
bit 4 bit 4 unused
|
|
bit 5 bit 5 unused
|
|
bit 6 bit 6 unused
|
|
bit 7 bit 7 unused
|
|
|
|
Byte 2 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwOmiMaskEntry 4 }
|
|
|
|
fmrwOmiFEMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(3))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fast Ethernet link alarm Severity and Suppression Mask for the MCU card.
|
|
|
|
Byte 0 alarm suppression mask, (bit coded: 0=masked 1= no masked)
|
|
Byte 1 alarm severity map (bit coded: 0=not urgent, 1=urgent)
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarm mask is bit coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 1
|
|
bit 0 bit 0 FE LINK ALARM
|
|
bit 1 bit 1 unused
|
|
bit 2 bit 2 unused
|
|
bit 3 bit 3 unused
|
|
bit 4 bit 4 unused
|
|
bit 5 bit 5 unused
|
|
bit 6 bit 6 unused
|
|
bit 7 bit 7 unused
|
|
|
|
Byte 2 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwOmiMaskEntry 5 }
|
|
|
|
fmrwOmiGBEMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(3))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"GigaBit Ethernet link alarm Severity and Suppression Mask for the MCU card.
|
|
|
|
Byte 0 alarm suppression mask, (bit coded: 0=masked 1= no masked)
|
|
Byte 1 alarm severity map (bit coded: 0=not urgent, 1=urgent)
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarm mask is bit coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 1
|
|
bit 0 bit 0 GBE LINK ALARM
|
|
bit 1 bit 1 unused
|
|
bit 2 bit 2 unused
|
|
bit 3 bit 3 unused
|
|
bit 4 bit 4 unused
|
|
bit 5 bit 5 unused
|
|
bit 6 bit 6 unused
|
|
bit 7 bit 7 unused
|
|
|
|
Byte 2 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwOmiMaskEntry 6 }
|
|
|
|
fmrwOmiSFPMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(3))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SFP laser/interface alarm Severity and Suppression Mask for the MCU card.
|
|
|
|
Byte 0 alarm suppression mask, (bit coded: 0=masked 1= no masked)
|
|
Byte 1 alarm severity map (bit coded: 0=not urgent, 1=urgent)
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarm mask is bit coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 1
|
|
bit 0 bit 0 SFP LASER ALARM
|
|
bit 1 bit 1 SFP INTERFACE ALARM
|
|
bit 2 bit 2 unused
|
|
bit 3 bit 3 unused
|
|
bit 4 bit 4 unused
|
|
bit 5 bit 5 unused
|
|
bit 6 bit 6 unused
|
|
bit 7 bit 7 unused
|
|
|
|
Byte 2 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwOmiMaskEntry 7 }
|
|
|
|
fmrwOmiOutputMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(1),
|
|
on(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm output mask for the MCU card
|
|
1 Alarm output Off
|
|
2 Alarm output On
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwOmiMaskEntry 8 }
|
|
|
|
|
|
fmrwOmiCESMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(3))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CES interface alarm Severity and Suppression Mask for the MCU card.
|
|
|
|
Byte 0 alarm suppression mask, (bit coded: 0=masked 1= no masked)
|
|
Byte 1 alarm severity map (bit coded: 0=not urgent, 1=urgent)
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarm mask is bit coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 1
|
|
bit 0 bit 0 LOS TDM
|
|
bit 1 bit 1 ARE ETH
|
|
bit 2 bit 2 LOF ETH
|
|
bit 3 bit 3 LOS Clock In
|
|
bit 4 bit 4 AIS TDM
|
|
bit 5 bit 5 RAI ETH
|
|
bit 6 bit 6 AIS ETH
|
|
bit 7 bit 7 unused
|
|
|
|
Byte 2 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwOmiMaskEntry 9 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW NT Rps Mask
|
|
--------------------------------------------------------------------------------
|
|
fmrwFarRpsMaskTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwFarRpsMaskEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwMask 8 }
|
|
|
|
fmrwFarRpsMaskEntry OBJECT-TYPE
|
|
SYNTAX FmrwFarRpsMaskEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwFarRpsMaskPortIndex, fmrwFarRpsMaskLinkIndex }
|
|
::= { fmrwFarRpsMaskTable 1 }
|
|
|
|
FmrwFarRpsMaskEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwFarRpsMaskPortIndex INTEGER,
|
|
fmrwFarRpsMaskLinkIndex INTEGER,
|
|
fmrwFarRpsMask OCTET STRING
|
|
}
|
|
|
|
fmrwFarRpsMaskPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwFarRpsMaskEntry 1 }
|
|
|
|
fmrwFarRpsMaskLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwFarRpsMaskEntry 2 }
|
|
|
|
fmrwFarRpsMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(3))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm Severity Mask and Alarm Suppression Mask for Remote Power Supply (RPS).
|
|
|
|
This variable only returns meaningful values if the management
|
|
system is connected to an LT device. If it is connected to an
|
|
NT device on the local interface, this variable will return
|
|
'NotLt' as result.
|
|
|
|
This variable is an 2 byte octet string. Byte 0 contains the
|
|
alarm suppression mask, byte 1 contains the severity map.
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarms are coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 1
|
|
bit 0 bit 0 UCR12
|
|
bit 1 bit 1 UCR1
|
|
bit 2 bit 2 UCR2
|
|
bit 3 bit 3 OVR
|
|
bit 4 bit 4 NOSYM
|
|
bit 5 bit 5 DEFECT
|
|
bit 6 bit 6 unused
|
|
bit 7 bit 7 unused
|
|
|
|
Byte 2 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwFarRpsMaskEntry 3 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW SRU Mask
|
|
--------------------------------------------------------------------------------
|
|
fmrwSruMaskTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwSruMaskEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwMask 9 }
|
|
|
|
fmrwSruMaskEntry OBJECT-TYPE
|
|
SYNTAX FmrwSruMaskEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwSruMaskPortIndex, fmrwSruMaskLinkIndex }
|
|
::= { fmrwSruMaskTable 1 }
|
|
|
|
FmrwSruMaskEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwSruMaskPortIndex INTEGER,
|
|
fmrwSruMaskLinkIndex INTEGER,
|
|
fmrwSruMask OCTET STRING
|
|
}
|
|
|
|
fmrwSruMaskPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwSruMaskEntry 1 }
|
|
|
|
fmrwSruMaskLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwSruMaskEntry 2 }
|
|
|
|
fmrwSruMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(5))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm Severity Mask and Alarm Suppression Mask for Regenerator Section A (LT side).
|
|
|
|
This variable only returns meaningful values if the management
|
|
system is connected to an LT device. If it is connected to an
|
|
NT device on the local interface, this variable will return
|
|
'NotLt' as result.
|
|
|
|
This variable is a 4 byte octet string. Bytes 0-1 contain the
|
|
alarm suppression mask, bytes 2-3 contain the severity map.
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarms are coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 2
|
|
bit 0 bit 0 LOS-L
|
|
bit 1 bit 1 BER3-L
|
|
bit 2 bit 2 BER6-L
|
|
bit 3 bit 3 LOS-N
|
|
bit 4 bit 4 BER3-N
|
|
bit 5 bit 5 BER6-N
|
|
bit 6 bit 6 Equipment
|
|
bit 7 bit 7 LOSW-L
|
|
Byte 1 Byte 3
|
|
bit 0 bit 0 LOSW-N
|
|
bit 1 bit 1 Thres-Att-L
|
|
bit 2 bit 2 Thres-Att-N
|
|
bit 3 bit 3 Thres-Snr-L
|
|
bit 4 bit 4 Thres-Snr-N
|
|
bit 5 bit 5 unused
|
|
bit 6 bit 6 unused
|
|
bit 7 bit 7 unused
|
|
|
|
Byte 4 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
2 NotLt The local device is not an LT
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwSruMaskEntry 3 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW Master GTU Mask
|
|
--------------------------------------------------------------------------------
|
|
fmrwGtuMasterMaskTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwGtuMasterMaskEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwMask 10 }
|
|
|
|
fmrwGtuMasterMaskEntry OBJECT-TYPE
|
|
SYNTAX FmrwGtuMasterMaskEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwGtuMasterMaskPortIndex, fmrwGtuMasterMaskLinkIndex }
|
|
::= { fmrwGtuMasterMaskTable 1 }
|
|
|
|
FmrwGtuMasterMaskEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwGtuMasterMaskPortIndex INTEGER,
|
|
fmrwGtuMasterMaskLinkIndex INTEGER,
|
|
fmrwGtuMasterMask OCTET STRING
|
|
}
|
|
|
|
fmrwGtuMasterMaskPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwGtuMasterMaskEntry 1 }
|
|
|
|
fmrwGtuMasterMaskLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwGtuMasterMaskEntry 2 }
|
|
|
|
fmrwGtuMasterMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(9))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm Severity Mask and Alarm Suppression Mask for Master Alarms.
|
|
|
|
This variable only returns meaningful values if the management
|
|
system is connected to an LT device. If it is connected to an
|
|
NT device on the local interface, this variable will return
|
|
'NotLt' as result.
|
|
|
|
This variable is an 8 byte octet string. Bytes 0-3 contain the
|
|
alarm suppression mask, bytes 4-7 contain the severity map.
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
The alarms are coded as follows:
|
|
|
|
Suppression Severity Alarm
|
|
Byte 0 Byte 4
|
|
bit 0 bit 0 LOS-V
|
|
bit 1 bit 1 LFA-V
|
|
bit 2 bit 2 AIS-V
|
|
bit 3 bit 3 RAI-V
|
|
bit 4 bit 4 BER3-V
|
|
bit 5 bit 5 BER6-V
|
|
bit 6 bit 6 LOS-T
|
|
bit 7 bit 7 LFA-T
|
|
Byte 1 Byte 5
|
|
bit 0 bit 0 AIS-T
|
|
bit 1 bit 1 RAI-T
|
|
bit 2 bit 2 BER3-T
|
|
bit 3 bit 3 BER6-T
|
|
bit 4 bit 4 LOAR-D
|
|
bit 5 bit 5 LOAT-D
|
|
bit 6 bit 6 Equipment
|
|
bit 7 bit 7 A-LOS
|
|
Byte 2 Byte 6
|
|
bit 0 bit 0 LOS-T4
|
|
bit 1 bit 1 LOS-V-Slave
|
|
bit 2 bit 2 LFA-V-Slave
|
|
bit 3 bit 3 AIS-V-Slave
|
|
bit 4 bit 4 RAI-V-Slave
|
|
bit 5 bit 5 BER3-V-Slave
|
|
bit 6 bit 6 BER6-V-Slave
|
|
bit 7 bit 7 LOS-T-Slave
|
|
Byte 3 Byte 7
|
|
bit 0 bit 0 LFA-T-Slave
|
|
bit 1 bit 1 AIS-T-Slave
|
|
bit 2 bit 2 RAI-T-Slave
|
|
bit 3 bit 3 BER3-T-Slave
|
|
bit 4 bit 4 BER6-T-Slave
|
|
bit 5 bit 5 LOAR-D-Slave
|
|
bit 6 bit 6 LOAT-D-Slave
|
|
bit 7 bit 7 unused
|
|
|
|
Byte 8 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
2 NotLt The local device is not an LT
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwGtuMasterMaskEntry 3 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW Local Alarm Mask Configuration
|
|
--------------------------------------------------------------------------------
|
|
fmrwLocalAlarmMaskConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwLocalAlarmMaskConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwMask 11 }
|
|
|
|
fmrwLocalAlarmMaskConfigEntry OBJECT-TYPE
|
|
SYNTAX FmrwLocalAlarmMaskConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwLocalAlarmMaskConfigPortIndex, fmrwLocalAlarmMaskConfigLinkIndex }
|
|
::= { fmrwLocalAlarmMaskConfigTable 1 }
|
|
|
|
FmrwLocalAlarmMaskConfigEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwLocalAlarmMaskConfigPortIndex INTEGER,
|
|
fmrwLocalAlarmMaskConfigLinkIndex INTEGER,
|
|
fmrwLocalAlarmMaskConfigArray OCTET STRING
|
|
}
|
|
|
|
fmrwLocalAlarmMaskConfigPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwLocalAlarmMaskConfigEntry 1 }
|
|
|
|
fmrwLocalAlarmMaskConfigLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwLocalAlarmMaskConfigEntry 2 }
|
|
|
|
fmrwLocalAlarmMaskConfigArray OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(91))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm Severity Mask and Alarm Suppression Mask for LT Alarms.
|
|
|
|
This variable only returns meaningful values if the management
|
|
system is connected to an LT device. If it is connected to an
|
|
NT device on the local interface, this variable will return
|
|
'NotLt' as result.
|
|
|
|
This variable is an 91 byte octet string. Bytes 0-29 contain the
|
|
alarm suppression mask, bytes 30-59 contain the severity mask,
|
|
bytes 60-89 contain the logging mask.
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
If the bit in the logging mask is set, the corresponding alarm is
|
|
logged.
|
|
|
|
Alarm mask coding for STUP/QSTUP:
|
|
|
|
Suppression Severity Logging Alarm
|
|
Byte 0 Byte 30 Byte 60
|
|
bit 0 bit 0 bit 0 XTU_LOS_U
|
|
bit 1 bit 1 bit 1 XTU_LFA_U
|
|
bit 2 bit 2 bit 2 XTU_AIS_U
|
|
bit 3 bit 3 bit 3 XTU_BNA_U
|
|
bit 4 bit 4 bit 4 XTU_RAI_U
|
|
bit 5 bit 5 bit 5 XTU_BER3_U
|
|
bit 6 bit 6 bit 6 XTU_BER6_U
|
|
bit 7 bit 7 bit 7 XTU_LOS_Ux
|
|
Byte 1 Byte 31 Byte 61
|
|
bit 0 bit 0 bit 0 XTU_LOSW_Ux
|
|
bit 1 bit 1 bit 1 XTU_BER3_Ux
|
|
bit 2 bit 2 bit 2 XTU_BER6_Ux
|
|
bit 3 bit 3 bit 3 XTU_LOS_T
|
|
bit 4 bit 4 bit 4 XTU_LFA_T
|
|
bit 5 bit 5 bit 5 XTU_AIS_T
|
|
bit 6 bit 6 bit 6 XTU_RAI_T
|
|
bit 7 bit 7 bit 7 XTU_BER3_T
|
|
Byte 21 Byte 32 Byte 62
|
|
bit 0 bit 0 bit 0 XTU_BER6_T
|
|
bit 1 bit 1 bit 1 XTU_LOA_RX_D
|
|
bit 2 bit 2 bit 2 XTU_LOA_TX_D
|
|
bit 3 bit 3 bit 3 XTU_EQUIPMENT
|
|
bit 4 bit 4 bit 4 XTU_LOS_T3
|
|
bit 5 bit 5 bit 5 XTU_LOS_T4
|
|
bit 6 bit 6 bit 6 XTU_P1_LINKDOWN
|
|
bit 7 bit 7 bit 7 XTU_LOA_RX_WAN
|
|
Byte 3 Byte 33 Byte 63
|
|
bit 0 bit 0 bit 0 XTU_LOA_TX_WAN
|
|
bit 1 bit 1 bit 1 XTU_MIR_TX_WAN
|
|
bit 2 bit 2 bit 2 XTU_LOS_D
|
|
bit 3 bit 3 bit 3 XTU_POWERFAIL
|
|
bit 4 bit 4 bit 4 XTU_REM_PWRFAIL
|
|
bit 5 bit 5 bit 5 XTU_TD_ATT
|
|
bit 6 bit 6 bit 6 XTU_TD_SNR
|
|
bit 7 bit 7 bit 7 XTU_XFW
|
|
Bytes 4-14 Bytes 34-44 Bytes 64-74
|
|
unused
|
|
Byte 15 Byte 45 Byte 75
|
|
bit 0 bit 0 bit 0 XRU_LOS_UL
|
|
bit 1 bit 1 bit 1 XRU_BER3_UL
|
|
bit 2 bit 2 bit 2 XRU_BER6_UL
|
|
bit 3 bit 3 bit 3 XRU_LOS_UN
|
|
bit 4 bit 4 bit 4 XRU_BER3_UN
|
|
bit 5 bit 5 bit 5 XRU_BER6_UN
|
|
bit 6 bit 6 bit 6 XRU_EQUIPMENT
|
|
bit 7 bit 7 bit 7 XRU_LOSW_UL
|
|
Byte 16 Byte 46 Byte 76
|
|
bit 0 bit 0 bit 0 XRU_LOSW_UN
|
|
bit 1 bit 1 bit 1 XRU_TD_ATT_UL
|
|
bit 2 bit 2 bit 2 XRU_TD_SNR_UL
|
|
bit 3 bit 3 bit 3 XRU_TD_ATT_UN
|
|
bit 4 bit 4 bit 4 XRU_TD_SNR_UN
|
|
bit 5 bit 5 bit 5 unused
|
|
bit 6 bit 6 bit 6 unused
|
|
bit 7 bit 7 bit 7 unused
|
|
Bytes 17-24 Bytes 47-54 Bytes 77-84
|
|
unused
|
|
Byte 25 Byte 55 Byte 85
|
|
bit 0 bit 0 bit 0 RPS_UC
|
|
bit 1 bit 1 bit 1 RPS_OC
|
|
bit 2 bit 2 bit 2 RPS_UNBAL
|
|
bit 3 bit 3 bit 3 RPS_DEFEKT
|
|
bit 4 bit 4 bit 4 unused
|
|
bit 5 bit 5 bit 5 unused
|
|
bit 6 bit 6 bit 6 unused
|
|
bit 7 bit 7 bit 7 unused
|
|
Bytes 26-29 Bytes 56-59 Bytes 86-89
|
|
unused
|
|
|
|
Byte 90 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwLocalAlarmMaskConfigEntry 3 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW Far Alarm Mask Configuration
|
|
--------------------------------------------------------------------------------
|
|
fmrwFarAlarmMaskConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwFarAlarmMaskConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwMask 12 }
|
|
|
|
fmrwFarAlarmMaskConfigEntry OBJECT-TYPE
|
|
SYNTAX FmrwFarAlarmMaskConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwFarAlarmMaskConfigPortIndex, fmrwFarAlarmMaskConfigLinkIndex }
|
|
::= { fmrwFarAlarmMaskConfigTable 1 }
|
|
|
|
FmrwFarAlarmMaskConfigEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwFarAlarmMaskConfigPortIndex INTEGER,
|
|
fmrwFarAlarmMaskConfigLinkIndex INTEGER,
|
|
fmrwFarAlarmMaskConfigArray OCTET STRING
|
|
}
|
|
|
|
fmrwFarAlarmMaskConfigPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwFarAlarmMaskConfigEntry 1 }
|
|
|
|
fmrwFarAlarmMaskConfigLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwFarAlarmMaskConfigEntry 2 }
|
|
|
|
fmrwFarAlarmMaskConfigArray OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(91))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm Severity Mask and Alarm Suppression Mask for NT Alarms.
|
|
|
|
This variable is an 91 byte octet string. Bytes 0-29 contain the
|
|
alarm suppression mask, bytes 30-59 contain the severity mask,
|
|
bytes 60-89 contain the logging mask.
|
|
The masks are bit coded. If a bit in the suppression mask is set,
|
|
the corresponding alarm has the severity defined by the severity
|
|
mask. If the bit in the suppression mask is zero, the corresponding
|
|
alarm has no severity (i.e. has no influence on the alarm summary).
|
|
If a bit in the severity mask is set, the corresponding alarm is
|
|
considered to be 'Urgent', if it is zero, the alarm is 'Non-Urgent'.
|
|
If the bit in the logging mask is set, the corresponding alarm is
|
|
logged.
|
|
|
|
Alarm mask coding for STUP/QSTUP:
|
|
|
|
Suppression Severity Logging Alarm
|
|
Byte 0 Byte 30 Byte 60
|
|
bit 0 bit 0 bit 0 XTU_LOS_U
|
|
bit 1 bit 1 bit 1 XTU_LFA_U
|
|
bit 2 bit 2 bit 2 XTU_AIS_U
|
|
bit 3 bit 3 bit 3 XTU_BNA_U
|
|
bit 4 bit 4 bit 4 XTU_RAI_U
|
|
bit 5 bit 5 bit 5 XTU_BER3_U
|
|
bit 6 bit 6 bit 6 XTU_BER6_U
|
|
bit 7 bit 7 bit 7 XTU_LOS_Ux
|
|
Byte 1 Byte 31 Byte 61
|
|
bit 0 bit 0 bit 0 XTU_LOSW_Ux
|
|
bit 1 bit 1 bit 1 XTU_BER3_Ux
|
|
bit 2 bit 2 bit 2 XTU_BER6_Ux
|
|
bit 3 bit 3 bit 3 XTU_LOS_T
|
|
bit 4 bit 4 bit 4 XTU_LFA_T
|
|
bit 5 bit 5 bit 5 XTU_AIS_T
|
|
bit 6 bit 6 bit 6 XTU_RAI_T
|
|
bit 7 bit 7 bit 7 XTU_BER3_T
|
|
Byte 21 Byte 32 Byte 62
|
|
bit 0 bit 0 bit 0 XTU_BER6_T
|
|
bit 1 bit 1 bit 1 XTU_LOA_RX_D
|
|
bit 2 bit 2 bit 2 XTU_LOA_TX_D
|
|
bit 3 bit 3 bit 3 XTU_EQUIPMENT
|
|
bit 4 bit 4 bit 4 XTU_LOS_T3
|
|
bit 5 bit 5 bit 5 XTU_LOS_T4
|
|
bit 6 bit 6 bit 6 XTU_P1_LINKDOWN
|
|
bit 7 bit 7 bit 7 XTU_LOA_RX_WAN
|
|
Byte 3 Byte 33 Byte 63
|
|
bit 0 bit 0 bit 0 XTU_LOA_TX_WAN
|
|
bit 1 bit 1 bit 1 XTU_MIR_TX_WAN
|
|
bit 2 bit 2 bit 2 XTU_LOS_D
|
|
bit 3 bit 3 bit 3 XTU_POWERFAIL
|
|
bit 4 bit 4 bit 4 XTU_REM_PWRFAIL
|
|
bit 5 bit 5 bit 5 XTU_TD_ATT
|
|
bit 6 bit 6 bit 6 XTU_TD_SNR
|
|
bit 7 bit 7 bit 7 XTU_XFW
|
|
Bytes 4-14 Bytes 34-44 Bytes 64-74
|
|
unused
|
|
Byte 15 Byte 45 Byte 75
|
|
bit 0 bit 0 bit 0 XRU_LOS_UL
|
|
bit 1 bit 1 bit 1 XRU_BER3_UL
|
|
bit 2 bit 2 bit 2 XRU_BER6_UL
|
|
bit 3 bit 3 bit 3 XRU_LOS_UN
|
|
bit 4 bit 4 bit 4 XRU_BER3_UN
|
|
bit 5 bit 5 bit 5 XRU_BER6_UN
|
|
bit 6 bit 6 bit 6 XRU_EQUIPMENT
|
|
bit 7 bit 7 bit 7 XRU_LOSW_UL
|
|
Byte 16 Byte 46 Byte 76
|
|
bit 0 bit 0 bit 0 XRU_LOSW_UN
|
|
bit 1 bit 1 bit 1 XRU_TD_ATT_UL
|
|
bit 2 bit 2 bit 2 XRU_TD_SNR_UL
|
|
bit 3 bit 3 bit 3 XRU_TD_ATT_UN
|
|
bit 4 bit 4 bit 4 XRU_TD_SNR_UN
|
|
bit 5 bit 5 bit 5 unused
|
|
bit 6 bit 6 bit 6 unused
|
|
bit 7 bit 7 bit 7 unused
|
|
Bytes 17-24 Bytes 47-54 Bytes 77-84
|
|
unused
|
|
Byte 25 Byte 55 Byte 85
|
|
bit 0 bit 0 bit 0 RPS_UC
|
|
bit 1 bit 1 bit 1 RPS_OC
|
|
bit 2 bit 2 bit 2 RPS_UNBAL
|
|
bit 3 bit 3 bit 3 RPS_DEFEKT
|
|
bit 4 bit 4 bit 4 unused
|
|
bit 5 bit 5 bit 5 unused
|
|
bit 6 bit 6 bit 6 unused
|
|
bit 7 bit 7 bit 7 unused
|
|
Bytes 26-29 Bytes 56-59 Bytes 86-89
|
|
unused
|
|
|
|
Byte 90 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
::= { fmrwFarAlarmMaskConfigEntry 3 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW Htu Traps
|
|
--------------------------------------------------------------------------------
|
|
fmrwHtuTrapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwHtuTrapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwTrap 1 }
|
|
|
|
fmrwHtuTrapEntry OBJECT-TYPE
|
|
SYNTAX FmrwHtuTrapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwHtuTrapPortIndex, fmrwHtuTrapLinkIndex }
|
|
::= { fmrwHtuTrapTable 1 }
|
|
|
|
FmrwHtuTrapEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwHtuTrapPortIndex INTEGER,
|
|
fmrwHtuTrapLinkIndex INTEGER,
|
|
fmrwHtuTrapEnable INTEGER,
|
|
fmrwHtuTrapSuppDisAlarmTrap INTEGER
|
|
}
|
|
|
|
fmrwHtuTrapPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwHtuTrapEntry 1 }
|
|
|
|
fmrwHtuTrapLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwHtuTrapEntry 2 }
|
|
|
|
fmrwHtuTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Allows the suppression of all traps from a certain device
|
|
without altering the assigned alarm severities via the alarm
|
|
masks. The following values are supported:
|
|
1 Disabled Suppress all traps
|
|
2 Enabled Send traps from this system
|
|
254 Unknown value (not supported for set)
|
|
255 Unsupported variable for addressed device (not supported for set)"
|
|
::= { fmrwHtuTrapEntry 3 }
|
|
|
|
fmrwHtuTrapSuppDisAlarmTrap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Allows the suppression of alarm traps when the line's overall
|
|
alarm summary remains 'No Alarm'. This feature is useful for
|
|
preventing masked alarm from causing unwanted trap traffic.
|
|
Trap generation can be suppressed entirely using the variable
|
|
fmrwHtuTrapEnable.
|
|
The following values are supported:
|
|
1 Disabled Allow all traps
|
|
2 Enabled Suppress trap for constant 'No Alarm' summary
|
|
254 Unknown value (not supported for set)
|
|
255 Unsupported variable for addressed device (not supported for set)"
|
|
::= { fmrwHtuTrapEntry 4 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW Omi Traps
|
|
--------------------------------------------------------------------------------
|
|
fmrwOmiTrapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwOmiTrapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwTrap 2 }
|
|
|
|
fmrwOmiTrapEntry OBJECT-TYPE
|
|
SYNTAX FmrwOmiTrapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwOmiTrapPortIndex }
|
|
::= { fmrwOmiTrapTable 1 }
|
|
|
|
FmrwOmiTrapEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwOmiTrapPortIndex INTEGER,
|
|
fmrwOmiTrapEnable INTEGER,
|
|
fmrwOmiTrapSuppDisAlarmTrap INTEGER
|
|
}
|
|
|
|
fmrwOmiTrapPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwOmiTrapEntry 1 }
|
|
|
|
fmrwOmiTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Allows the suppression of all traps from a certain OMI
|
|
without altering the assigned alarm severities via the alarm
|
|
masks. The following values are supported:
|
|
1 Disabled Suppress all traps originating on this OMI
|
|
2 Enabled Send traps from this OMI
|
|
254 Unknown value (not supported for set)
|
|
255 Unsupported variable for addressed device (not supported for set)
|
|
|
|
Please note that the suppression mechanism only suppresses those
|
|
traps originating on the OMI itself but not traps generated by
|
|
line cards which are addressed through the OMI. These traps must
|
|
be suppressed on the line cards themselves."
|
|
::= { fmrwOmiTrapEntry 2 }
|
|
|
|
fmrwOmiTrapSuppDisAlarmTrap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Allows the suppression of alarm traps when the line's overall
|
|
alarm summary remains 'No Alarm'. This feature is useful for
|
|
preventing masked alarm from causing unwanted trap traffic.
|
|
Trap generation can be suppressed entirely using the variable
|
|
fmrwOmiTrapEnable.
|
|
1 Disabled Suppress all traps originating on this OMI
|
|
2 Enabled Send traps from this OMI
|
|
254 Unknown value (not supported for set)
|
|
255 Unsupported variable for addressed device (not supported for set)"
|
|
::= { fmrwOmiTrapEntry 3 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW Thresholds
|
|
--------------------------------------------------------------------------------
|
|
fmrwThresholdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwThresholdEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrw 4 }
|
|
|
|
fmrwThresholdEntry OBJECT-TYPE
|
|
SYNTAX FmrwThresholdEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwThresholdPortIndex, fmrwThresholdLinkIndex }
|
|
::= { fmrwThresholdTable 1 }
|
|
|
|
FmrwThresholdEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwThresholdPortIndex INTEGER,
|
|
fmrwThresholdLinkIndex INTEGER,
|
|
fmrwThresholdAttenuation INTEGER,
|
|
fmrwThresholdSnr INTEGER
|
|
}
|
|
|
|
fmrwThresholdPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwThresholdEntry 1 }
|
|
|
|
fmrwThresholdLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwThresholdEntry 2 }
|
|
|
|
fmrwThresholdAttenuation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
att1dB(2),
|
|
att2dB(3),
|
|
att3dB(4),
|
|
att4dB(5),
|
|
att5dB(6),
|
|
att6dB(7),
|
|
att7dB(8),
|
|
att8dB(9),
|
|
att9dB(10),
|
|
att10dB(11),
|
|
att11dB(12),
|
|
att12dB(13),
|
|
att13dB(14),
|
|
att14dB(15),
|
|
att15dB(16),
|
|
att16dB(17),
|
|
att17dB(18),
|
|
att18dB(19),
|
|
att19dB(20),
|
|
att20dB(21),
|
|
att21dB(22),
|
|
att22dB(23),
|
|
att23dB(24),
|
|
att24dB(25),
|
|
att25dB(26),
|
|
att26dB(27),
|
|
att27dB(28),
|
|
att28dB(29),
|
|
att29dB(30),
|
|
att30dB(31),
|
|
att31dB(32),
|
|
att32dB(33),
|
|
att33dB(34),
|
|
att34dB(35),
|
|
att35dB(36),
|
|
att36dB(37),
|
|
att37dB(38),
|
|
att38dB(39),
|
|
att39dB(40),
|
|
att40dB(41),
|
|
att41dB(42),
|
|
att42dB(43),
|
|
att43dB(44),
|
|
att44dB(45),
|
|
att45dB(46),
|
|
att46dB(47),
|
|
att47dB(48),
|
|
att48dB(49),
|
|
att49dB(50),
|
|
att50dB(51),
|
|
att51dB(52),
|
|
att52dB(53),
|
|
att53dB(54),
|
|
att54dB(55),
|
|
att55dB(56),
|
|
att56dB(57),
|
|
att57dB(58),
|
|
att58dB(59),
|
|
att59dB(60),
|
|
att60dB(61),
|
|
att61dB(62),
|
|
att62dB(63),
|
|
att63dB(64),
|
|
att64dB(65),
|
|
att65dB(66),
|
|
att66dB(67),
|
|
att67dB(68),
|
|
att68dB(69),
|
|
att69dB(70),
|
|
att70dB(71),
|
|
att71dB(72),
|
|
att72dB(73),
|
|
att73dB(74),
|
|
att74dB(75),
|
|
att75dB(76),
|
|
att76dB(77),
|
|
att77dB(78),
|
|
att78dB(79),
|
|
att79dB(80),
|
|
att80dB(81),
|
|
att81dB(82),
|
|
att82dB(83),
|
|
att83dB(84),
|
|
att84dB(85),
|
|
att85dB(86),
|
|
att86dB(87),
|
|
att87dB(88),
|
|
att88dB(89),
|
|
att89dB(90),
|
|
att90dB(91),
|
|
att91dB(92),
|
|
att92dB(93),
|
|
att93dB(94),
|
|
att94dB(95),
|
|
att95dB(96),
|
|
att96dB(97),
|
|
att97dB(98),
|
|
att98dB(99),
|
|
att99dB(100),
|
|
att100dB(101),
|
|
att101dB(102),
|
|
att102dB(103),
|
|
att103dB(104),
|
|
att104dB(105),
|
|
att105dB(106),
|
|
att106dB(107),
|
|
att107dB(108),
|
|
att108dB(109),
|
|
att109dB(110),
|
|
att110dB(111),
|
|
att111dB(112),
|
|
att112dB(113),
|
|
att113dB(114),
|
|
att114dB(115),
|
|
att115dB(116),
|
|
att116dB(117),
|
|
att117dB(118),
|
|
att118dB(119),
|
|
att119dB(120),
|
|
att120dB(121),
|
|
att121dB(122),
|
|
att122dB(123),
|
|
att123dB(124),
|
|
att124dB(125),
|
|
att125dB(126),
|
|
att126dB(127),
|
|
att127dB(128),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the Attenuation Threshold
|
|
1 disabled Disabled
|
|
2 att1dB Attenuation in dB (1..127)
|
|
... Attenuation in dB (1..127)
|
|
128 att127dB Attenuation in dB (1..127)
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmrwThresholdEntry 4 }
|
|
|
|
fmrwThresholdSnr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
snr1dB(2),
|
|
snr2dB(3),
|
|
snr3dB(4),
|
|
snr4dB(5),
|
|
snr5dB(6),
|
|
snr6dB(7),
|
|
snr7dB(8),
|
|
snr8dB(9),
|
|
snr9dB(10),
|
|
snr10dB(11),
|
|
snr11dB(12),
|
|
snr12dB(13),
|
|
snr13dB(14),
|
|
snr14dB(15),
|
|
snr15dB(16),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the Signal To Noise Ration (SNR) Threshold
|
|
1 disabled Disabled
|
|
2 snr1dB SNR Margin in db (1..15)
|
|
... SNR Margin in db (1..15)
|
|
16 snr15dB SNR Margin in db (1..15)
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { fmrwThresholdEntry 5 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW Htu Actions
|
|
--------------------------------------------------------------------------------
|
|
fmrwHtuActionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwHtuActionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwActions 1 }
|
|
|
|
fmrwHtuActionEntry OBJECT-TYPE
|
|
SYNTAX FmrwHtuActionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwHtuActionPortIndex, fmrwHtuActionLinkIndex }
|
|
::= { fmrwHtuActionTable 1 }
|
|
|
|
FmrwHtuActionEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwHtuActionPortIndex INTEGER,
|
|
fmrwHtuActionLinkIndex INTEGER,
|
|
fmrwHtuActionResetAlarmLog INTEGER
|
|
}
|
|
|
|
fmrwHtuActionPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwHtuActionEntry 1 }
|
|
|
|
fmrwHtuActionLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwHtuActionEntry 2 }
|
|
|
|
fmrwHtuActionResetAlarmLog OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
reset(1),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clears the content of the Alarm Log
|
|
1 Reset Clears the log
|
|
254 Unknown value (not supported for set)
|
|
255 Unsupported variable for addressed device (not supported for set)"
|
|
::= { fmrwHtuActionEntry 3 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- FM-RW Htu Actions
|
|
--------------------------------------------------------------------------------
|
|
fmrwConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmrwConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { fmrwConfig 1 }
|
|
|
|
fmrwConfigEntry OBJECT-TYPE
|
|
SYNTAX FmrwConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { fmrwConfigPortIndex, fmrwConfigLinkIndex }
|
|
::= { fmrwConfigTable 1 }
|
|
|
|
FmrwConfigEntry ::=
|
|
SEQUENCE
|
|
{
|
|
fmrwConfigPortIndex INTEGER,
|
|
fmrwConfigLinkIndex INTEGER,
|
|
fmrwLocalPwrFailAlarmSupp INTEGER,
|
|
fmrwLocalL2SwitchTestMode INTEGER,
|
|
fmrwFarPwrFailAlarmSupp INTEGER,
|
|
fmrwFarL2SwitchTestMode INTEGER
|
|
}
|
|
|
|
fmrwConfigPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwConfigEntry 1 }
|
|
|
|
fmrwConfigLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { fmrwConfigEntry 2 }
|
|
|
|
fmrwLocalPwrFailAlarmSupp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Allows the suppression of power failure alarms. In addition
|
|
to the alarm masking provided by fmrwXtuXtMask, this feature
|
|
actually suppresses alarm generation at all.
|
|
1 Disabled Allow power failure alarms
|
|
2 Enabled Suppress power failure alarms
|
|
254 Unknown value (not supported for set)
|
|
255 Unsupported variable for addressed device (not supported for set)"
|
|
::= { fmrwConfigEntry 3 }
|
|
|
|
fmrwLocalL2SwitchTestMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(1),
|
|
active(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether the L2Switch operates in test mode
|
|
('transparent switch') or in standard mode.
|
|
1 Inactive L2Switch operates in standard mode
|
|
2 Active L2Switch operates in test mode
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { fmrwConfigEntry 4 }
|
|
|
|
fmrwFarPwrFailAlarmSupp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
enabled(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Allows the suppression of power failure alarms. In addition
|
|
to the alarm masking provided by fmrwXtuXtMask, this feature
|
|
actually suppresses alarm generation at all.
|
|
1 Disabled Allow power failure alarms
|
|
2 Enabled Suppress power failure alarms
|
|
254 Unknown value (not supported for set)
|
|
255 Unsupported variable for addressed device (not supported for set)"
|
|
::= { fmrwConfigEntry 5 }
|
|
|
|
fmrwFarL2SwitchTestMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(1),
|
|
active(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines whether the L2Switch operates in test mode
|
|
('transparent switch') or in standard mode.
|
|
1 Inactive L2Switch operates in standard mode
|
|
2 Active L2Switch operates in test mode
|
|
254 unknown
|
|
255 unsupported"
|
|
::= { fmrwConfigEntry 6 }
|
|
|
|
--==============================================================================
|
|
--==============================================================================
|
|
--
|
|
-- PM-RO
|
|
--
|
|
--==============================================================================
|
|
--==============================================================================
|
|
pmro OBJECT IDENTIFIER ::= { linksVers3 5 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- PM-RO HDSL Attenuation
|
|
--------------------------------------------------------------------------------
|
|
pmroHdslTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PmroHdslEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { pmro 1 }
|
|
|
|
pmroHdslEntry OBJECT-TYPE
|
|
SYNTAX PmroHdslEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { pmroHdslPortIndex, pmroHdslLinkIndex }
|
|
::= { pmroHdslTable 1 }
|
|
|
|
PmroHdslEntry ::=
|
|
SEQUENCE
|
|
{
|
|
pmroHdslPortIndex INTEGER,
|
|
pmroHdslLinkIndex INTEGER,
|
|
pmroHdslAttenuation1 INTEGER,
|
|
pmroHdslAttenuation2 INTEGER,
|
|
pmroHdslNoiseMargin1 INTEGER,
|
|
pmroHdslNoiseMargin2 INTEGER,
|
|
pmroHdslAttenuationNt1 INTEGER,
|
|
pmroHdslAttenuationNt2 INTEGER,
|
|
pmroHdslNoiseMarginNt1 INTEGER,
|
|
pmroHdslNoiseMarginNt2 INTEGER,
|
|
pmroHdslAttenuationReg1ALt INTEGER,
|
|
pmroHdslAttenuationReg1ANt INTEGER,
|
|
pmroHdslAttenuationReg2ALt INTEGER,
|
|
pmroHdslAttenuationReg2ANt INTEGER,
|
|
pmroHdslAttenuationReg1BLt INTEGER,
|
|
pmroHdslAttenuationReg1BNt INTEGER,
|
|
pmroHdslAttenuationReg2BLt INTEGER,
|
|
pmroHdslAttenuationReg2BNt INTEGER,
|
|
pmroHdslNoiseMarginReg1ALt INTEGER,
|
|
pmroHdslNoiseMarginReg1ANt INTEGER,
|
|
pmroHdslNoiseMarginReg2ALt INTEGER,
|
|
pmroHdslNoiseMarginReg2ANt INTEGER,
|
|
pmroHdslNoiseMarginReg1BLt INTEGER,
|
|
pmroHdslNoiseMarginReg1BNt INTEGER,
|
|
pmroHdslNoiseMarginReg2BLt INTEGER,
|
|
pmroHdslNoiseMarginReg2BNt INTEGER,
|
|
pmroHdslAttenuationReg31Lt INTEGER,
|
|
pmroHdslAttenuationReg31Nt INTEGER,
|
|
pmroHdslAttenuationReg32Lt INTEGER,
|
|
pmroHdslAttenuationReg32Nt INTEGER,
|
|
pmroHdslAttenuationReg41Lt INTEGER,
|
|
pmroHdslAttenuationReg41Nt INTEGER,
|
|
pmroHdslAttenuationReg42Lt INTEGER,
|
|
pmroHdslAttenuationReg42Nt INTEGER,
|
|
pmroHdslAttenuationReg51Lt INTEGER,
|
|
pmroHdslAttenuationReg51Nt INTEGER,
|
|
pmroHdslAttenuationReg52Lt INTEGER,
|
|
pmroHdslAttenuationReg52Nt INTEGER,
|
|
pmroHdslAttenuationReg61Lt INTEGER,
|
|
pmroHdslAttenuationReg61Nt INTEGER,
|
|
pmroHdslAttenuationReg62Lt INTEGER,
|
|
pmroHdslAttenuationReg62Nt INTEGER,
|
|
pmroHdslAttenuationReg71Lt INTEGER,
|
|
pmroHdslAttenuationReg71Nt INTEGER,
|
|
pmroHdslAttenuationReg72Lt INTEGER,
|
|
pmroHdslAttenuationReg72Nt INTEGER,
|
|
pmroHdslAttenuationReg81Lt INTEGER,
|
|
pmroHdslAttenuationReg81Nt INTEGER,
|
|
pmroHdslAttenuationReg82Lt INTEGER,
|
|
pmroHdslAttenuationReg82Nt INTEGER,
|
|
pmroHdslNoiseMarginReg31Lt INTEGER,
|
|
pmroHdslNoiseMarginReg31Nt INTEGER,
|
|
pmroHdslNoiseMarginReg32Lt INTEGER,
|
|
pmroHdslNoiseMarginReg32Nt INTEGER,
|
|
pmroHdslNoiseMarginReg41Lt INTEGER,
|
|
pmroHdslNoiseMarginReg41Nt INTEGER,
|
|
pmroHdslNoiseMarginReg42Lt INTEGER,
|
|
pmroHdslNoiseMarginReg42Nt INTEGER,
|
|
pmroHdslNoiseMarginReg51Lt INTEGER,
|
|
pmroHdslNoiseMarginReg51Nt INTEGER,
|
|
pmroHdslNoiseMarginReg52Lt INTEGER,
|
|
pmroHdslNoiseMarginReg52Nt INTEGER,
|
|
pmroHdslNoiseMarginReg61Lt INTEGER,
|
|
pmroHdslNoiseMarginReg61Nt INTEGER,
|
|
pmroHdslNoiseMarginReg62Lt INTEGER,
|
|
pmroHdslNoiseMarginReg62Nt INTEGER,
|
|
pmroHdslNoiseMarginReg71Lt INTEGER,
|
|
pmroHdslNoiseMarginReg71Nt INTEGER,
|
|
pmroHdslNoiseMarginReg72Lt INTEGER,
|
|
pmroHdslNoiseMarginReg72Nt INTEGER,
|
|
pmroHdslNoiseMarginReg81Lt INTEGER,
|
|
pmroHdslNoiseMarginReg81Nt INTEGER,
|
|
pmroHdslNoiseMarginReg82Lt INTEGER,
|
|
pmroHdslNoiseMarginReg82Nt INTEGER,
|
|
pmroHdslAttenuation3 INTEGER,
|
|
pmroHdslAttenuation4 INTEGER,
|
|
pmroHdslAttenuationNt3 INTEGER,
|
|
pmroHdslAttenuationNt4 INTEGER,
|
|
pmroHdslAttenuationReg13Lt INTEGER,
|
|
pmroHdslAttenuationReg13Nt INTEGER,
|
|
pmroHdslAttenuationReg14Lt INTEGER,
|
|
pmroHdslAttenuationReg14Nt INTEGER,
|
|
pmroHdslAttenuationReg23Lt INTEGER,
|
|
pmroHdslAttenuationReg23Nt INTEGER,
|
|
pmroHdslAttenuationReg24Lt INTEGER,
|
|
pmroHdslAttenuationReg24Nt INTEGER,
|
|
pmroHdslAttenuationReg33Lt INTEGER,
|
|
pmroHdslAttenuationReg33Nt INTEGER,
|
|
pmroHdslAttenuationReg34Lt INTEGER,
|
|
pmroHdslAttenuationReg34Nt INTEGER,
|
|
pmroHdslAttenuationReg43Lt INTEGER,
|
|
pmroHdslAttenuationReg43Nt INTEGER,
|
|
pmroHdslAttenuationReg44Lt INTEGER,
|
|
pmroHdslAttenuationReg44Nt INTEGER,
|
|
pmroHdslAttenuationReg53Lt INTEGER,
|
|
pmroHdslAttenuationReg53Nt INTEGER,
|
|
pmroHdslAttenuationReg54Lt INTEGER,
|
|
pmroHdslAttenuationReg54Nt INTEGER,
|
|
pmroHdslAttenuationReg63Lt INTEGER,
|
|
pmroHdslAttenuationReg63Nt INTEGER,
|
|
pmroHdslAttenuationReg64Lt INTEGER,
|
|
pmroHdslAttenuationReg64Nt INTEGER,
|
|
pmroHdslAttenuationReg73Lt INTEGER,
|
|
pmroHdslAttenuationReg73Nt INTEGER,
|
|
pmroHdslAttenuationReg74Lt INTEGER,
|
|
pmroHdslAttenuationReg74Nt INTEGER,
|
|
pmroHdslAttenuationReg83Lt INTEGER,
|
|
pmroHdslAttenuationReg83Nt INTEGER,
|
|
pmroHdslAttenuationReg84Lt INTEGER,
|
|
pmroHdslAttenuationReg84Nt INTEGER,
|
|
pmroHdslNoiseMargin3 INTEGER,
|
|
pmroHdslNoiseMargin4 INTEGER,
|
|
pmroHdslNoiseMarginNt3 INTEGER,
|
|
pmroHdslNoiseMarginNt4 INTEGER,
|
|
pmroHdslNoiseMarginReg13Lt INTEGER,
|
|
pmroHdslNoiseMarginReg13Nt INTEGER,
|
|
pmroHdslNoiseMarginReg14Lt INTEGER,
|
|
pmroHdslNoiseMarginReg14Nt INTEGER,
|
|
pmroHdslNoiseMarginReg23Lt INTEGER,
|
|
pmroHdslNoiseMarginReg23Nt INTEGER,
|
|
pmroHdslNoiseMarginReg24Lt INTEGER,
|
|
pmroHdslNoiseMarginReg24Nt INTEGER,
|
|
pmroHdslNoiseMarginReg33Lt INTEGER,
|
|
pmroHdslNoiseMarginReg33Nt INTEGER,
|
|
pmroHdslNoiseMarginReg34Lt INTEGER,
|
|
pmroHdslNoiseMarginReg34Nt INTEGER,
|
|
pmroHdslNoiseMarginReg43Lt INTEGER,
|
|
pmroHdslNoiseMarginReg43Nt INTEGER,
|
|
pmroHdslNoiseMarginReg44Lt INTEGER,
|
|
pmroHdslNoiseMarginReg44Nt INTEGER,
|
|
pmroHdslNoiseMarginReg53Lt INTEGER,
|
|
pmroHdslNoiseMarginReg53Nt INTEGER,
|
|
pmroHdslNoiseMarginReg54Lt INTEGER,
|
|
pmroHdslNoiseMarginReg54Nt INTEGER,
|
|
pmroHdslNoiseMarginReg63Lt INTEGER,
|
|
pmroHdslNoiseMarginReg63Nt INTEGER,
|
|
pmroHdslNoiseMarginReg64Lt INTEGER,
|
|
pmroHdslNoiseMarginReg64Nt INTEGER,
|
|
pmroHdslNoiseMarginReg73Lt INTEGER,
|
|
pmroHdslNoiseMarginReg73Nt INTEGER,
|
|
pmroHdslNoiseMarginReg74Lt INTEGER,
|
|
pmroHdslNoiseMarginReg74Nt INTEGER,
|
|
pmroHdslNoiseMarginReg83Lt INTEGER,
|
|
pmroHdslNoiseMarginReg83Nt INTEGER,
|
|
pmroHdslNoiseMarginReg84Lt INTEGER,
|
|
pmroHdslNoiseMarginReg84Nt INTEGER
|
|
}
|
|
|
|
pmroHdslPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroHdslEntry 1 }
|
|
|
|
pmroHdslLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroHdslEntry 2 }
|
|
|
|
pmroHdslAttenuation1 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of HDSL Path 1 at the local device
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 3 }
|
|
|
|
pmroHdslAttenuation2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of HDSL Path 2 at the local device
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 4 }
|
|
|
|
pmroHdslNoiseMargin1 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 1 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 5 }
|
|
|
|
pmroHdslNoiseMargin2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 6 }
|
|
|
|
pmroHdslAttenuationNt1 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 7 }
|
|
|
|
pmroHdslAttenuationNt2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 8 }
|
|
|
|
pmroHdslNoiseMarginNt1 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 9 }
|
|
|
|
pmroHdslNoiseMarginNt2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 10 }
|
|
|
|
pmroHdslAttenuationReg1ALt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 11 }
|
|
|
|
pmroHdslAttenuationReg1ANt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 12 }
|
|
|
|
pmroHdslAttenuationReg2ALt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 13 }
|
|
|
|
pmroHdslAttenuationReg2ANt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 14 }
|
|
|
|
pmroHdslAttenuationReg1BLt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 15 }
|
|
|
|
pmroHdslAttenuationReg1BNt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 16 }
|
|
|
|
pmroHdslAttenuationReg2BLt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 17 }
|
|
|
|
pmroHdslAttenuationReg2BNt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 18 }
|
|
|
|
pmroHdslNoiseMarginReg1ALt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 1 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 19 }
|
|
|
|
pmroHdslNoiseMarginReg1ANt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 20 }
|
|
|
|
pmroHdslNoiseMarginReg2ALt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 1 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 21 }
|
|
|
|
pmroHdslNoiseMarginReg2ANt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 22 }
|
|
|
|
pmroHdslNoiseMarginReg1BLt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 1 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 23 }
|
|
|
|
pmroHdslNoiseMarginReg1BNt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 24 }
|
|
|
|
pmroHdslNoiseMarginReg2BLt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 1 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 25 }
|
|
|
|
pmroHdslNoiseMarginReg2BNt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 26 }
|
|
|
|
pmroHdslAttenuationReg31Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 27 }
|
|
|
|
pmroHdslAttenuationReg31Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 28 }
|
|
|
|
pmroHdslAttenuationReg32Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 29 }
|
|
|
|
pmroHdslAttenuationReg32Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 30 }
|
|
|
|
pmroHdslAttenuationReg41Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 31 }
|
|
|
|
pmroHdslAttenuationReg41Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 32 }
|
|
|
|
pmroHdslAttenuationReg42Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 33 }
|
|
|
|
pmroHdslAttenuationReg42Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 34 }
|
|
|
|
pmroHdslAttenuationReg51Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 35 }
|
|
|
|
pmroHdslAttenuationReg51Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 36 }
|
|
|
|
pmroHdslAttenuationReg52Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 37 }
|
|
|
|
pmroHdslAttenuationReg52Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 38 }
|
|
|
|
pmroHdslAttenuationReg61Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 39 }
|
|
|
|
pmroHdslAttenuationReg61Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 40 }
|
|
|
|
pmroHdslAttenuationReg62Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 41 }
|
|
|
|
pmroHdslAttenuationReg62Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 42 }
|
|
|
|
pmroHdslAttenuationReg71Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 43 }
|
|
|
|
pmroHdslAttenuationReg71Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 44 }
|
|
|
|
pmroHdslAttenuationReg72Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 45 }
|
|
|
|
pmroHdslAttenuationReg72Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 46 }
|
|
|
|
pmroHdslAttenuationReg81Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 47 }
|
|
|
|
pmroHdslAttenuationReg81Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 48 }
|
|
|
|
pmroHdslAttenuationReg82Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 49 }
|
|
|
|
pmroHdslAttenuationReg82Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 50 }
|
|
|
|
pmroHdslNoiseMarginReg31Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 51 }
|
|
|
|
pmroHdslNoiseMarginReg31Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 52 }
|
|
|
|
pmroHdslNoiseMarginReg32Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 53 }
|
|
|
|
pmroHdslNoiseMarginReg32Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 54 }
|
|
|
|
pmroHdslNoiseMarginReg41Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 55 }
|
|
|
|
pmroHdslNoiseMarginReg41Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 56 }
|
|
|
|
pmroHdslNoiseMarginReg42Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 57 }
|
|
|
|
pmroHdslNoiseMarginReg42Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 58 }
|
|
|
|
pmroHdslNoiseMarginReg51Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 59 }
|
|
|
|
pmroHdslNoiseMarginReg51Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 60 }
|
|
|
|
pmroHdslNoiseMarginReg52Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 61 }
|
|
|
|
pmroHdslNoiseMarginReg52Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 62 }
|
|
|
|
pmroHdslNoiseMarginReg61Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 63 }
|
|
|
|
pmroHdslNoiseMarginReg61Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 64 }
|
|
|
|
pmroHdslNoiseMarginReg62Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 65 }
|
|
|
|
pmroHdslNoiseMarginReg62Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 66 }
|
|
|
|
pmroHdslNoiseMarginReg71Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 67 }
|
|
|
|
pmroHdslNoiseMarginReg71Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 68 }
|
|
|
|
pmroHdslNoiseMarginReg72Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 69 }
|
|
|
|
pmroHdslNoiseMarginReg72Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 70 }
|
|
|
|
pmroHdslNoiseMarginReg81Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 71 }
|
|
|
|
pmroHdslNoiseMarginReg81Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 72 }
|
|
|
|
pmroHdslNoiseMarginReg82Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 73 }
|
|
|
|
pmroHdslNoiseMarginReg82Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 2 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 74 }
|
|
|
|
pmroHdslAttenuation3 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of HDSL Path 3 at the local device
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 75 }
|
|
|
|
pmroHdslAttenuation4 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of HDSL Path 4 at the local device
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 76 }
|
|
|
|
pmroHdslAttenuationNt3 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 77 }
|
|
|
|
pmroHdslAttenuationNt4 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 78 }
|
|
|
|
pmroHdslAttenuationReg13Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 79 }
|
|
|
|
pmroHdslAttenuationReg13Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 80 }
|
|
|
|
pmroHdslAttenuationReg14Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 81 }
|
|
|
|
pmroHdslAttenuationReg14Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 82 }
|
|
|
|
pmroHdslAttenuationReg23Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 83 }
|
|
|
|
pmroHdslAttenuationReg23Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 84 }
|
|
|
|
pmroHdslAttenuationReg24Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 85 }
|
|
|
|
pmroHdslAttenuationReg24Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 86 }
|
|
|
|
pmroHdslAttenuationReg33Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 87 }
|
|
|
|
pmroHdslAttenuationReg33Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 88 }
|
|
|
|
pmroHdslAttenuationReg34Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 89 }
|
|
|
|
pmroHdslAttenuationReg34Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 90 }
|
|
|
|
pmroHdslAttenuationReg43Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 91 }
|
|
|
|
pmroHdslAttenuationReg43Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 92 }
|
|
|
|
pmroHdslAttenuationReg44Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 93 }
|
|
|
|
pmroHdslAttenuationReg44Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 94 }
|
|
|
|
pmroHdslAttenuationReg53Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 95 }
|
|
|
|
pmroHdslAttenuationReg53Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 96 }
|
|
|
|
pmroHdslAttenuationReg54Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 97 }
|
|
|
|
pmroHdslAttenuationReg54Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 98 }
|
|
|
|
pmroHdslAttenuationReg63Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 99 }
|
|
|
|
pmroHdslAttenuationReg63Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 100 }
|
|
|
|
pmroHdslAttenuationReg64Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 101 }
|
|
|
|
pmroHdslAttenuationReg64Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 102 }
|
|
|
|
pmroHdslAttenuationReg73Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 103 }
|
|
|
|
pmroHdslAttenuationReg73Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 104 }
|
|
|
|
pmroHdslAttenuationReg74Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 105 }
|
|
|
|
pmroHdslAttenuationReg74Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 106 }
|
|
|
|
pmroHdslAttenuationReg83Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 107 }
|
|
|
|
pmroHdslAttenuationReg83Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 108 }
|
|
|
|
pmroHdslAttenuationReg84Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 109 }
|
|
|
|
pmroHdslAttenuationReg84Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Attenuation of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 110 }
|
|
|
|
pmroHdslNoiseMargin3 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 3 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 111 }
|
|
|
|
pmroHdslNoiseMargin4 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of HDSL Path 4 at the local device.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 112 }
|
|
|
|
pmroHdslNoiseMarginNt3 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 113 }
|
|
|
|
pmroHdslNoiseMarginNt4 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 114 }
|
|
|
|
pmroHdslNoiseMarginReg13Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 115 }
|
|
|
|
pmroHdslNoiseMarginReg13Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 116 }
|
|
|
|
pmroHdslNoiseMarginReg14Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 117 }
|
|
|
|
pmroHdslNoiseMarginReg14Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 118 }
|
|
|
|
pmroHdslNoiseMarginReg23Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 119 }
|
|
|
|
pmroHdslNoiseMarginReg23Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 120 }
|
|
|
|
pmroHdslNoiseMarginReg24Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 121 }
|
|
|
|
pmroHdslNoiseMarginReg24Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 122 }
|
|
|
|
pmroHdslNoiseMarginReg33Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 123 }
|
|
|
|
pmroHdslNoiseMarginReg33Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 124 }
|
|
|
|
pmroHdslNoiseMarginReg34Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 125 }
|
|
|
|
pmroHdslNoiseMarginReg34Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 126 }
|
|
|
|
pmroHdslNoiseMarginReg43Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 127 }
|
|
|
|
pmroHdslNoiseMarginReg43Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 128 }
|
|
|
|
pmroHdslNoiseMarginReg44Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 129 }
|
|
|
|
pmroHdslNoiseMarginReg44Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 130 }
|
|
|
|
pmroHdslNoiseMarginReg53Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 131 }
|
|
|
|
pmroHdslNoiseMarginReg53Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 132 }
|
|
|
|
pmroHdslNoiseMarginReg54Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 133 }
|
|
|
|
pmroHdslNoiseMarginReg54Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 134 }
|
|
|
|
pmroHdslNoiseMarginReg63Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 135 }
|
|
|
|
pmroHdslNoiseMarginReg63Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 136 }
|
|
|
|
pmroHdslNoiseMarginReg64Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 137 }
|
|
|
|
pmroHdslNoiseMarginReg64Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 138 }
|
|
|
|
pmroHdslNoiseMarginReg73Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 139 }
|
|
|
|
pmroHdslNoiseMarginReg73Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 140 }
|
|
|
|
pmroHdslNoiseMarginReg74Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 141 }
|
|
|
|
pmroHdslNoiseMarginReg74Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
0-180 attenuation in steps of 0.5 dB
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 142 }
|
|
|
|
pmroHdslNoiseMarginReg83Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 143 }
|
|
|
|
pmroHdslNoiseMarginReg83Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 144 }
|
|
|
|
pmroHdslNoiseMarginReg84Lt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 145 }
|
|
|
|
pmroHdslNoiseMarginReg84Nt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin of the line.
|
|
The value is coded as a signed byte value
|
|
-63..63 noise margin in steps of 0.5 dB
|
|
126 unknown value
|
|
127 unsupported variable for addressed device"
|
|
::= { pmroHdslEntry 146 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- PM-RO Performance Values
|
|
--------------------------------------------------------------------------------
|
|
pmroValueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PmroValueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { pmro 2 }
|
|
|
|
pmroValueEntry OBJECT-TYPE
|
|
SYNTAX PmroValueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { pmroValuePortIndex, pmroValueLinkIndex, pmroValueCounterIndex }
|
|
::= { pmroValueTable 1 }
|
|
|
|
PmroValueEntry ::=
|
|
SEQUENCE
|
|
{
|
|
pmroValuePortIndex INTEGER,
|
|
pmroValueLinkIndex INTEGER,
|
|
pmroValueCounterIndex INTEGER,
|
|
pmroCounter OCTET STRING
|
|
}
|
|
|
|
pmroValuePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroValueEntry 1 }
|
|
|
|
pmroValueLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroValueEntry 2 }
|
|
|
|
pmroValueCounterIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the performance counter of a link
|
|
and is used as index for the other elements in the Table
|
|
|
|
CRC-4
|
|
1 LT U-Interface
|
|
2 NT U-Interface
|
|
3 LT T-Interface incoming
|
|
4 LT T-Interface outgoing
|
|
|
|
CRC-6
|
|
5 LT Wire pair 1 Direction NT
|
|
6 RegA Wire pair 1 Direction LT
|
|
7 RegA Wire pair 1 Direction NT
|
|
8 NT Wire pair 1 Direction LT
|
|
9 LT Wire pair 2 Direction NT
|
|
10 RegA Wire pair 2 Direction LT
|
|
11 RegA Wire pair 2 Direction NT
|
|
12 NT Wire pair 2 Direction LT"
|
|
::= { pmroValueEntry 3 }
|
|
|
|
pmroCounter OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(96))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This octet string contains the performance data of the performance
|
|
counter addressed through the index. The performance values are stored
|
|
as 4 byte values, MSB first.
|
|
|
|
They are mapped as follows:
|
|
|
|
Byte Interval Variable
|
|
|
|
0..3 Current 15 Minutes Elapsed Time
|
|
4..7 Current 15 Minutes Block Errors
|
|
8..11 Current 15 Minutes Background Block Errors
|
|
12..15 Current 15 Minutes Errored Seconds
|
|
16..19 Current 15 Minutes Severely Errored Seconds
|
|
20..23 Current 15 Minutes Unavailable Time
|
|
24..27 Last 15 Minutes Elapsed Time
|
|
28..31 Last 15 Minutes Block Errors
|
|
32..35 Last 15 Minutes Background Block Errors
|
|
36..39 Last 15 Minutes Errored Seconds
|
|
40..43 Last 15 Minutes Severely Errored Seconds
|
|
44..47 Last 15 Minutes Unavailable Time
|
|
48..51 Current 24 Hours Elapsed Time
|
|
52..55 Current 24 Hours Block Errors
|
|
56..59 Current 24 Hours Background Block Errors
|
|
60..63 Current 24 Hours Errored Seconds
|
|
64..67 Current 24 Hours Severely Errored Seconds
|
|
68..71 Current 24 Hours Unavailable Time
|
|
72..75 Last 24 Hours Elapsed Time
|
|
76..79 Last 24 Hours Block Errors
|
|
80..83 Last 24 Hours Background Block Errors
|
|
84..87 Last 24 Hours Errored Seconds
|
|
88..91 Last 24 Hours Severely Errored Seconds
|
|
92..95 Last 24 Hours Unavailable Time
|
|
|
|
The variables have the following ranges:
|
|
15 Minute Intervals:
|
|
ET, ES, SES, UT 0..900 Seconds
|
|
BE, BBE 0..300'000 Errors
|
|
|
|
24 Hour Intervals
|
|
ET, ES, SES, UT 0..86'400 Seconds
|
|
BE, BBE 0..28'800'00 Errors
|
|
|
|
All Variables can contain the following values to indicate
|
|
undefined results:
|
|
HEX DEC Meaning
|
|
0xfffffffd (-3) Disabled (the proxy does not store values for this link)
|
|
0xfffffffe (-2) Unsupported variable for addressed device
|
|
0xffffffff (-1) Unknown value"
|
|
::= { pmroValueEntry 4 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- PM-RO STU Performance Values
|
|
--------------------------------------------------------------------------------
|
|
pmroStuValueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PmroStuValueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { pmro 3 }
|
|
|
|
pmroStuValueEntry OBJECT-TYPE
|
|
SYNTAX PmroStuValueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { pmroStuValuePortIndex, pmroStuValueLinkIndex, pmroStuValueCounterIndex, pmroStuValueIntervalIndex }
|
|
::= { pmroStuValueTable 1 }
|
|
|
|
PmroStuValueEntry ::=
|
|
SEQUENCE
|
|
{
|
|
pmroStuValuePortIndex INTEGER,
|
|
pmroStuValueLinkIndex INTEGER,
|
|
pmroStuValueCounterIndex INTEGER,
|
|
pmroStuValueIntervalIndex INTEGER,
|
|
pmroStuCounter OCTET STRING
|
|
}
|
|
|
|
pmroStuValuePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroStuValueEntry 1 }
|
|
|
|
pmroStuValueLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroStuValueEntry 2 }
|
|
|
|
pmroStuValueCounterIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the performance counter of a link
|
|
and is used as index for the other elements in the Table
|
|
|
|
CRC-4
|
|
1 LT U-Interface
|
|
2 NT U-Interface
|
|
3 LT V-Interface incoming
|
|
4 LT V-Interface outgoing
|
|
13 NT T-Interface incoming
|
|
14 NT T-Interface outgoing
|
|
|
|
CRC-6
|
|
5 LT Wire pair 1 Direction NT
|
|
6 Reg1 Wire pair 1 Direction LT
|
|
7 Reg1 Wire pair 1 Direction NT
|
|
8 NT Wire pair 1 Direction LT
|
|
9 LT Wire pair 2 Direction NT
|
|
10 Reg1 Wire pair 2 Direction LT
|
|
11 Reg1 Wire pair 2 Direction NT
|
|
12 NT Wire pair 2 Direction LT
|
|
|
|
15 Reg2 Wire pair 1 Direction LT
|
|
16 Reg2 Wire pair 1 Direction NT
|
|
17 Reg2 Wire pair 2 Direction LT
|
|
18 Reg2 Wire pair 2 Direction NT
|
|
|
|
19 Reg3 Wire pair 1 Direction LT
|
|
20 Reg3 Wire pair 1 Direction NT
|
|
21 Reg4 Wire pair 1 Direction LT
|
|
22 Reg4 Wire pair 1 Direction NT
|
|
23 Reg5 Wire pair 1 Direction LT
|
|
24 Reg5 Wire pair 1 Direction NT
|
|
25 Reg6 Wire pair 1 Direction LT
|
|
26 Reg6 Wire pair 1 Direction NT
|
|
27 Reg7 Wire pair 1 Direction LT
|
|
28 Reg7 Wire pair 1 Direction NT
|
|
29 Reg8 Wire pair 1 Direction LT
|
|
30 Reg8 Wire pair 1 Direction NT
|
|
|
|
31 Reg3 Wire pair 2 Direction LT
|
|
32 Reg3 Wire pair 2 Direction NT
|
|
33 Reg4 Wire pair 2 Direction LT
|
|
34 Reg4 Wire pair 2 Direction NT
|
|
35 Reg5 Wire pair 2 Direction LT
|
|
36 Reg5 Wire pair 2 Direction NT
|
|
37 Reg6 Wire pair 2 Direction LT
|
|
38 Reg6 Wire pair 2 Direction NT
|
|
39 Reg7 Wire pair 2 Direction LT
|
|
40 Reg7 Wire pair 2 Direction NT
|
|
41 Reg8 Wire pair 2 Direction LT
|
|
42 Reg8 Wire pair 2 Direction NT
|
|
|
|
43 Reg1 Wire pair 3 Direction LT
|
|
44 Reg1 Wire pair 3 Direction NT
|
|
45 Reg2 Wire pair 3 Direction LT
|
|
46 Reg2 Wire pair 3 Direction NT
|
|
47 Reg3 Wire pair 3 Direction LT
|
|
48 Reg3 Wire pair 3 Direction NT
|
|
49 Reg4 Wire pair 3 Direction LT
|
|
50 Reg4 Wire pair 3 Direction NT
|
|
|
|
59 Reg1 Wire pair 4 Direction LT
|
|
60 Reg1 Wire pair 4 Direction NT
|
|
61 Reg2 Wire pair 4 Direction LT
|
|
62 Reg2 Wire pair 4 Direction NT
|
|
63 Reg3 Wire pair 4 Direction LT
|
|
64 Reg3 Wire pair 4 Direction NT
|
|
65 Reg4 Wire pair 4 Direction LT
|
|
66 Reg4 Wire pair 4 Direction NT
|
|
|
|
75 LT Wire pair 3 Direction NT
|
|
76 NT Wire pair 3 Direction LT
|
|
77 LT Wire pair 4 Direction NT
|
|
78 NT Wire pair 4 Direction LT
|
|
|
|
FAS and BPV
|
|
79 FAS-V/T error local
|
|
80 BPV-V/T local
|
|
81 FAS-T error far
|
|
82 BPV-T far
|
|
|
|
83 V_A CRC4
|
|
84 V_A Ebit
|
|
85 V_B CRC4
|
|
86 V_B Ebit
|
|
87 V_C CRC4
|
|
88 V_C Ebit
|
|
89 V_D CRC4
|
|
90 V_D Ebit
|
|
|
|
91 MCS Ch a LT
|
|
92 MCS Ch b LT
|
|
93 MCS Ch c LT
|
|
94 MCS Ch d LT
|
|
|
|
96 MCS Ch a NT
|
|
97 MCS Ch b NT
|
|
98 MCS Ch c NT
|
|
99 MCS Ch d NT
|
|
|
|
101 Far end MCS Ch a NT
|
|
102 Far end MCS Ch b NT
|
|
103 Far end MCS Ch c NT
|
|
104 Far end MCS Ch d NT
|
|
|
|
106 Far end MCS Ch a LT
|
|
107 Far end MCS Ch b LT
|
|
108 Far end MCS Ch c LT
|
|
109 Far end MCS Ch d LT
|
|
|
|
113 V_A CRC4 far
|
|
114 V_A Ebit far
|
|
115 V_B CRC4 far
|
|
116 V_B Ebit far
|
|
117 V_C CRC4 far
|
|
118 V_C Ebit far
|
|
119 V_D CRC4 far
|
|
120 V_D Ebit far"
|
|
::= { pmroStuValueEntry 3 }
|
|
|
|
pmroStuValueIntervalIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the performance interval pair of a link
|
|
and is used as index for the other elements in the Table
|
|
The following values are supported:
|
|
Index Interval 1 Interval 2
|
|
1 Current Last 1
|
|
2 Last 2 Last 3
|
|
3 Last 4 Last 5
|
|
4 Last 6 Last 7
|
|
5 Last 8 Last 9
|
|
6 Last 10 Last 11
|
|
7 Last 12 Last 13
|
|
8 Last 14 Last 15
|
|
9 Last 16 Last 17
|
|
10 Last 18 Last 19
|
|
11 Last 20 Last 21
|
|
12 Last 22 Last 23
|
|
13 Last 24 Last 25
|
|
14 Last 26 Last 27
|
|
15 Last 28 Last 29
|
|
16 Last 30 Last 31
|
|
17 Last 32 unused"
|
|
::= { pmroStuValueEntry 4 }
|
|
|
|
pmroStuCounter OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(96))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This octet string contains the performance data of the performance
|
|
counter addressed through the index. The performance values are stored
|
|
as 4 byte values, MSB first.
|
|
|
|
They are mapped as follows:
|
|
|
|
Byte Interval Variable
|
|
|
|
0..3 Interval 1 - 15 Minutes Elapsed Time
|
|
4..7 Interval 1 - 15 Minutes Block Errors
|
|
8..11 Interval 1 - 15 Minutes LOSW Seconds
|
|
12..15 Interval 1 - 15 Minutes Errored Seconds
|
|
16..19 Interval 1 - 15 Minutes Severely Errored Seconds
|
|
20..23 Interval 1 - 15 Minutes Unavailable Time
|
|
24..27 Interval 2 - 15 Minutes Elapsed Time
|
|
28..31 Interval 2 - 15 Minutes Block Errors
|
|
32..35 Interval 2 - 15 Minutes LOSW Seconds
|
|
36..39 Interval 2 - 15 Minutes Errored Seconds
|
|
40..43 Interval 2 - 15 Minutes Severely Errored Seconds
|
|
44..47 Interval 2 - 15 Minutes Unavailable Time
|
|
48..51 Interval 1 - 24 Hours Elapsed Time
|
|
52..55 Interval 1 - 24 Hours Block Errors
|
|
56..59 Interval 1 - 24 Hours LOSW Seconds
|
|
60..63 Interval 1 - 24 Hours Errored Seconds
|
|
64..67 Interval 1 - 24 Hours Severely Errored Seconds
|
|
68..71 Interval 1 - 24 Hours Unavailable Time
|
|
72..75 Interval 2 - 24 Hours Elapsed Time
|
|
76..79 Interval 2 - 24 Hours Block Errors
|
|
80..83 Interval 2 - 24 Hours LOSW Seconds
|
|
84..87 Interval 2 - 24 Hours Errored Seconds
|
|
88..91 Interval 2 - 24 Hours Severely Errored Seconds
|
|
92..95 Interval 2 - 24 Hours Unavailable Time
|
|
|
|
The variables have the following ranges:
|
|
15 Minute Intervals:
|
|
ET, ES, SES, LOSWS, UT 0..900 Seconds
|
|
BE 0..300'000 Errors
|
|
|
|
24 Hour Intervals
|
|
ET, ES, SES, LOSWS, UT 0..86'400 Seconds
|
|
BE 0..28'800'00 Errors
|
|
|
|
All Variables can contain the following values to indicate
|
|
undefined results:
|
|
HEX DEC Meaning
|
|
0xfffffffd (-3) Disabled (the proxy does not store values for this link)
|
|
0xfffffffe (-2) Unsupported variable for addressed device
|
|
0xffffffff (-1) Unknown value"
|
|
::= { pmroStuValueEntry 5 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- PM-RO 15 min Dummy Performance Variables for APC
|
|
--------------------------------------------------------------------------------
|
|
pmroApc15Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PmroApc15Entry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { pmro 4 }
|
|
|
|
pmroApc15Entry OBJECT-TYPE
|
|
SYNTAX PmroApc15Entry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { pmroApc15PortIndex, pmroApc15LinkIndex, pmroApc15CounterIndex }
|
|
::= { pmroApc15Table 1 }
|
|
|
|
PmroApc15Entry ::=
|
|
SEQUENCE
|
|
{
|
|
pmroApc15PortIndex INTEGER,
|
|
pmroApc15LinkIndex INTEGER,
|
|
pmroApc15CounterIndex INTEGER,
|
|
pmroApc15BlockErrors INTEGER,
|
|
pmroApc15BackgroundBlockErrors INTEGER,
|
|
pmroApc15ErroredSeconds INTEGER,
|
|
pmroApc15SeverelyErroredSeconds INTEGER,
|
|
pmroApc15UnavailableTime INTEGER
|
|
}
|
|
|
|
pmroApc15PortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroApc15Entry 1 }
|
|
|
|
pmroApc15LinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroApc15Entry 2 }
|
|
|
|
pmroApc15CounterIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the performance counter of a link
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroApc15Entry 3 }
|
|
|
|
pmroApc15BlockErrors OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is an unused dummy variable which is used by the Automatic
|
|
Performance Collection (APC) and does not exist on the proxy
|
|
which means that it will never be answered."
|
|
::= { pmroApc15Entry 4 }
|
|
|
|
pmroApc15BackgroundBlockErrors OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is an unused dummy variable which is used by the Automatic
|
|
Performance Collection (APC) and does not exist on the proxy
|
|
which means that it will never be answered."
|
|
::= { pmroApc15Entry 5 }
|
|
|
|
pmroApc15ErroredSeconds OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is an unused dummy variable which is used by the Automatic
|
|
Performance Collection (APC) and does not exist on the proxy
|
|
which means that it will never be answered."
|
|
::= { pmroApc15Entry 6 }
|
|
|
|
pmroApc15SeverelyErroredSeconds OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is an unused dummy variable which is used by the Automatic
|
|
Performance Collection (APC) and does not exist on the proxy
|
|
which means that it will never be answered."
|
|
::= { pmroApc15Entry 7 }
|
|
|
|
pmroApc15UnavailableTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is an unused dummy variable which is used by the Automatic
|
|
Performance Collection (APC) and does not exist on the proxy
|
|
which means that it will never be answered."
|
|
::= { pmroApc15Entry 8 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- PM-RO 24 hour Dummy Performance Variables for APC
|
|
--------------------------------------------------------------------------------
|
|
pmroApc24Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PmroApc24Entry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { pmro 5 }
|
|
|
|
pmroApc24Entry OBJECT-TYPE
|
|
SYNTAX PmroApc24Entry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { pmroApc24PortIndex, pmroApc24LinkIndex, pmroApc24CounterIndex }
|
|
::= { pmroApc24Table 1 }
|
|
|
|
PmroApc24Entry ::=
|
|
SEQUENCE
|
|
{
|
|
pmroApc24PortIndex INTEGER,
|
|
pmroApc24LinkIndex INTEGER,
|
|
pmroApc24CounterIndex INTEGER,
|
|
pmroApc24BlockErrors INTEGER,
|
|
pmroApc24BackgroundBlockErrors INTEGER,
|
|
pmroApc24ErroredSeconds INTEGER,
|
|
pmroApc24SeverelyErroredSeconds INTEGER,
|
|
pmroApc24UnavailableTime INTEGER
|
|
}
|
|
|
|
pmroApc24PortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroApc24Entry 1 }
|
|
|
|
pmroApc24LinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroApc24Entry 2 }
|
|
|
|
pmroApc24CounterIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the performance counter of a link
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroApc24Entry 3 }
|
|
|
|
pmroApc24BlockErrors OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is an unused dummy variable which is used by the Automatic
|
|
Performance Collection (APC) and does not exist on the proxy
|
|
which means that it will never be answered."
|
|
::= { pmroApc24Entry 4 }
|
|
|
|
pmroApc24BackgroundBlockErrors OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is an unused dummy variable which is used by the Automatic
|
|
Performance Collection (APC) and does not exist on the proxy
|
|
which means that it will never be answered."
|
|
::= { pmroApc24Entry 5 }
|
|
|
|
pmroApc24ErroredSeconds OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is an unused dummy variable which is used by the Automatic
|
|
Performance Collection (APC) and does not exist on the proxy
|
|
which means that it will never be answered."
|
|
::= { pmroApc24Entry 6 }
|
|
|
|
pmroApc24SeverelyErroredSeconds OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is an unused dummy variable which is used by the Automatic
|
|
Performance Collection (APC) and does not exist on the proxy
|
|
which means that it will never be answered."
|
|
::= { pmroApc24Entry 7 }
|
|
|
|
pmroApc24UnavailableTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is an unused dummy variable which is used by the Automatic
|
|
Performance Collection (APC) and does not exist on the proxy
|
|
which means that it will never be answered."
|
|
::= { pmroApc24Entry 8 }
|
|
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- PM-RO Bit Error Ration Measurement
|
|
--------------------------------------------------------------------------------
|
|
pmroBerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PmroBerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { pmro 6 }
|
|
|
|
pmroBerEntry OBJECT-TYPE
|
|
SYNTAX PmroBerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { pmroBerPortIndex, pmroBerLinkIndex }
|
|
::= { pmroBerTable 1 }
|
|
|
|
PmroBerEntry ::=
|
|
SEQUENCE
|
|
{
|
|
pmroBerPortIndex INTEGER,
|
|
pmroBerLinkIndex INTEGER,
|
|
pmroBerStatus INTEGER,
|
|
pmroBerInterval INTEGER,
|
|
pmroBerElapsedTime INTEGER,
|
|
pmroBerSynchLoss INTEGER,
|
|
pmroBerNumErrs INTEGER,
|
|
pmroBerErrorFreeSeconds INTEGER,
|
|
pmroBerResultMcsChannelA INTEGER,
|
|
pmroBerResultMcsChannelB INTEGER,
|
|
pmroBerResultMcsChannelC INTEGER,
|
|
pmroBerResultMcsChannelD INTEGER
|
|
}
|
|
|
|
pmroBerPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroBerEntry 1 }
|
|
|
|
pmroBerLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroBerEntry 2 }
|
|
|
|
pmroBerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
done(1),
|
|
running(2),
|
|
search(3),
|
|
failed(4),
|
|
abort(5),
|
|
norun(6),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Bit Error Ration measurement
|
|
1 Measurement is finished
|
|
2 Measurement is still in progress
|
|
3 Measurement is still trying to find synchronisation
|
|
4 Measurement failed to find synchronisation
|
|
5 Measurement has been (aborted)
|
|
6 Measurement has not yet been started
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { pmroBerEntry 3 }
|
|
|
|
pmroBerInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
oneMin(2),
|
|
tenMin(3),
|
|
oneHour(4),
|
|
oneDay(5),
|
|
oneMinDirV(6),
|
|
tenMinDirV(7),
|
|
oneHourDirV(8),
|
|
oneDayDirV(9),
|
|
oneMinRoundTrip(10),
|
|
tenMinRoundTrip(11),
|
|
oneHourRoundTrip(12),
|
|
oneDayRoundTrip(13),
|
|
oneMinMCS(14),
|
|
tenMinMCS(15),
|
|
oneHourMCS(16),
|
|
oneDayMCS(17),
|
|
oneMinData(18),
|
|
tenMinData(19),
|
|
oneHourData(20),
|
|
oneDayData(21),
|
|
oneMinMCSLocal(22),
|
|
tenMinMCSLocal(23),
|
|
oneHourMCSLocal(24),
|
|
oneDayMCSLocal(25),
|
|
oneMinG703If(26),
|
|
tenMinG703If(27),
|
|
oneHourG703If(28),
|
|
oneDayG703If(29),
|
|
oneMinDataIf(30),
|
|
tenMinDataIf(31),
|
|
oneHourDataIf(32),
|
|
oneDayDataIf(33),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interval of the current or last measurement
|
|
2 OneMin The measurement duration is/was 1 minute
|
|
3 TenMin The measurement duration is/was 10 minutes
|
|
4 OneHour The measurement duration is/was 1 hour
|
|
5 OneDay The measurement duration is/was 24 hours
|
|
6 OneMinDirV The measurement duration is/was 1 minute (direction V)
|
|
7 TenMinDirV The measurement duration is/was 10 minutes (direction V)
|
|
8 OneHourDirV The measurement duration is/was 1 hour (direction V)
|
|
9 OneDayDirV The measurement duration is/was 24 hours (direction V)
|
|
10 OneMinRoundTrip The measurement duration is/was 1 minute (round trip)
|
|
11 TenMinRoundTrip The measurement duration is/was 10 minutes (round trip)
|
|
12 OneHourRoundTrip The measurement duration is/was 1 hour (round trip)
|
|
13 OneDayRoundTrip The measurement duration is/was 24 hours (round trip)
|
|
14 OneMinMCS The measurement duration is/was 1 minute (MCS)
|
|
15 TenMinMCS The measurement duration is/was 10 minutes (MCS)
|
|
16 OneHourMCS The measurement duration is/was 1 hour (MCS)
|
|
17 OneDayMCS The measurement duration is/was 24 hours (MCS)
|
|
18 OneMinData The measurement duration is/was 1 minute (Data)
|
|
19 TenMinData The measurement duration is/was 10 minutes (Data)
|
|
20 OneHourData The measurement duration is/was 1 hour (Data)
|
|
21 OneDayData The measurement duration is/was 24 hours (Data)
|
|
22 OneMinMCSLocal The measurement duration is/was 1 minute (MCSLocal)
|
|
23 TenMinMCSLocal The measurement duration is/was 10 minutes (MCSLocal)
|
|
24 OneHourMCSLocal The measurement duration is/was 1 hour (MCSLocal)
|
|
25 OneDayMCSLocal The measurement duration is/was 24 hours (MCSLocal)
|
|
26 OneMinG703If The measurement duration is/was 1 minute (G.703 Interface)
|
|
27 TenMinG703If The measurement duration is/was 10 minutes (G.703 Interface)
|
|
28 OneHourG703If The measurement duration is/was 1 hour (G.703 Interface)
|
|
29 OneDayG703If The measurement duration is/was 24 hours (G.703 Interface)
|
|
30 OneMinDataIf The measurement duration is/was 1 minute (Data Interface)
|
|
31 TenMinDataIf The measurement duration is/was 10 minutes (Data Interface)
|
|
32 OneHourDataIf The measurement duration is/was 1 hour (Data Interface)
|
|
33 OneDayDataIf The measurement duration is/was 24 hours (Data Interface)
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { pmroBerEntry 4 }
|
|
|
|
pmroBerElapsedTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..'ffffffff'h)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Elapsed time of measurement. During synchronisation (pmroBerStatus=search) this
|
|
indicates how long the device has been searching for synchronistation. Once
|
|
synchronisation has been found (pmroBerStatus=running), this indicates how long
|
|
the measurement has been running.
|
|
0..86'400 Elapsed time in seconds
|
|
0xfffffffe Unknown value
|
|
0xffffffff Unsupported variable for addressed device"
|
|
::= { pmroBerEntry 5 }
|
|
|
|
pmroBerSynchLoss OBJECT-TYPE
|
|
SYNTAX INTEGER (0..'ffffffff'h)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time without synchronisation. During synchronisation (pmroBerStatus=search) this
|
|
indicates how long the device has been searching for synchronistation and corresponds
|
|
to pmroBerElapsedTime. Once synchronisation has been found (pmroBerStatus=running),
|
|
this indicates how many seconds during the measurement synchronisation has been
|
|
(temporarily) lost.
|
|
0..86'40000 Number of seconds without synchronisation
|
|
0xfffffffe Unknown value
|
|
0xffffffff Unsupported variable for addressed device"
|
|
::= { pmroBerEntry 6 }
|
|
|
|
pmroBerNumErrs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..'ffffffff'h)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of bit errors which occurred during the Bit Error Ratio measurement
|
|
0..4'294'967'292 Effective number of errors
|
|
0xfffffffd More than 4'294'967'292 errors
|
|
0xfffffffe Unknown value
|
|
0xffffffff Unsupported variable for addressed device"
|
|
::= { pmroBerEntry 7 }
|
|
|
|
pmroBerErrorFreeSeconds OBJECT-TYPE
|
|
SYNTAX INTEGER (0..'ffffffff'h)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of error free seconds during the measurement. This can be used to determine
|
|
whether errors are 'bursty', i.e. occurring only during a short period of time (when
|
|
the number of error free seconds is close to the elapsed time) or continuous (when
|
|
the number of error free seconds is low).
|
|
0..86'400 Error free seconds during measurement
|
|
0xfffffffe Unknown value
|
|
0xffffffff Unsupported variable for addressed device"
|
|
::= { pmroBerEntry 8 }
|
|
|
|
pmroBerResultMcsChannelA OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notOK(1),
|
|
ok(2),
|
|
noPattern(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"BER test result for MCS channel a:
|
|
1 Test was error free on this MCS channel
|
|
2 Test showed errors on this MCS channel
|
|
3 No pattern on this MCS channel found while test
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { pmroBerEntry 9 }
|
|
|
|
pmroBerResultMcsChannelB OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notOK(1),
|
|
ok(2),
|
|
noPattern(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"BER test result for MCS channel b:
|
|
1 Test was error free on this MCS channel
|
|
2 Test showed errors on this MCS channel
|
|
3 No pattern on this MCS channel found while test
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { pmroBerEntry 10 }
|
|
|
|
pmroBerResultMcsChannelC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notOK(1),
|
|
ok(2),
|
|
noPattern(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"BER test result for MCS channel c:
|
|
1 Test was error free on this MCS channel
|
|
2 Test showed errors on this MCS channel
|
|
3 No pattern on this MCS channel found while test
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { pmroBerEntry 11 }
|
|
|
|
pmroBerResultMcsChannelD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notOK(1),
|
|
ok(2),
|
|
noPattern(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"BER test result for MCS channel d:
|
|
1 Test was error free on this MCS channel
|
|
2 Test showed errors on this MCS channel
|
|
3 No pattern on this MCS channel found while test
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { pmroBerEntry 12 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- PM-RO Line Probing
|
|
--------------------------------------------------------------------------------
|
|
pmroLineProbeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PmroLineProbeEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { pmro 7 }
|
|
|
|
pmroLineProbeEntry OBJECT-TYPE
|
|
SYNTAX PmroLineProbeEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { pmroLineProbePortIndex, pmroLineProbeLinkIndex }
|
|
::= { pmroLineProbeTable 1 }
|
|
|
|
PmroLineProbeEntry ::=
|
|
SEQUENCE
|
|
{
|
|
pmroLineProbePortIndex INTEGER,
|
|
pmroLineProbeLinkIndex INTEGER,
|
|
pmroLineProbeStatus INTEGER,
|
|
pmroLineProbeBandwidthMask OCTET STRING,
|
|
pmroLineProbeSNRMargin OCTET STRING,
|
|
pmroLineProbeSNRMarginWire2 OCTET STRING,
|
|
pmroLineProbeSNRMarginWire3 OCTET STRING,
|
|
pmroLineProbeSNRMarginWire4 OCTET STRING
|
|
}
|
|
|
|
pmroLineProbePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroLineProbeEntry 1 }
|
|
|
|
pmroLineProbeLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroLineProbeEntry 2 }
|
|
|
|
pmroLineProbeStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
done(1),
|
|
running(2),
|
|
failed(3),
|
|
abort(4),
|
|
norun(5),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of Line Probing
|
|
1 Done Probing is finished
|
|
2 Running Probing is still in progress
|
|
3 Failed Probing failed
|
|
4 Abort Probing has been aborted
|
|
5 Norun Probing has never been started
|
|
254 Unknown value
|
|
255 Unsupported variable for addressed device"
|
|
::= { pmroLineProbeEntry 3 }
|
|
|
|
pmroLineProbeBandwidthMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bandwidths used for line probing
|
|
|
|
Bandwidth
|
|
Byte 0
|
|
bit 0 reserved
|
|
bit 1 reserved
|
|
bit 2 192 kbit/s
|
|
bit 3 256 kbit/s
|
|
bit 4 320 kbit/s
|
|
bit 5 384 kbit/s
|
|
bit 6 448 kbit/s
|
|
bit 7 512 kbit/s
|
|
Byte 1
|
|
bit 0 576 kbit/s
|
|
bit 1 640 kbit/s
|
|
bit 2 704 kbit/s
|
|
bit 3 768 kbit/s
|
|
bit 4 832 kbit/s
|
|
bit 5 896 kbit/s
|
|
bit 6 960 kbit/s
|
|
bit 7 1024 kbit/s
|
|
Byte 2
|
|
bit 0 1088 kbit/s
|
|
bit 1 1152 kbit/s
|
|
bit 2 1216 kbit/s
|
|
bit 3 1280 kbit/s
|
|
bit 4 1344 kbit/s
|
|
bit 5 1408 kbit/s
|
|
bit 6 1472 kbit/s
|
|
bit 7 1536 kbit/s
|
|
Byte 3
|
|
bit 0 1600 kbit/s
|
|
bit 1 1664 kbit/s
|
|
bit 2 1728 kbit/s
|
|
bit 3 1792 kbit/s
|
|
bit 4 1856 kbit/s
|
|
bit 5 1920 kbit/s
|
|
bit 6 1984 kbit/s
|
|
bit 7 2048 kbit/s
|
|
Byte 4
|
|
bit 0 2112 kbit/s
|
|
bit 1 2176 kbit/s
|
|
bit 2 2240 kbit/s
|
|
bit 3 2304 kbit/s
|
|
bit 4 unused
|
|
bit 5 unused
|
|
bit 6 unused
|
|
bit 7 unused
|
|
Byte 5 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
|
|
::= { pmroLineProbeEntry 4 }
|
|
|
|
pmroLineProbeSNRMargin OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(36))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each byte contains as result of the line probe the SNR margin
|
|
for the bandwidth corresponding to the byte number
|
|
|
|
The value for each byte is coded as follows:
|
|
-127..+127 SNR margin in dB
|
|
-128 Unknown value"
|
|
::= { pmroLineProbeEntry 5 }
|
|
|
|
pmroLineProbeSNRMarginWire2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(36))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each byte contains as result of the line probe the SNR margin
|
|
for the bandwidth corresponding to the byte number
|
|
|
|
The value for each byte is coded as follows:
|
|
-127..+127 SNR margin in dB
|
|
-128 Unknown value"
|
|
::= { pmroLineProbeEntry 6 }
|
|
|
|
pmroLineProbeSNRMarginWire3 OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(36))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each byte contains as result of the line probe the SNR margin
|
|
for the bandwidth corresponding to the byte number
|
|
|
|
The value for each byte is coded as follows:
|
|
-127..+127 SNR margin in dB
|
|
-128 Unknown value"
|
|
::= { pmroLineProbeEntry 7 }
|
|
|
|
pmroLineProbeSNRMarginWire4 OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(36))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each byte contains as result of the line probe the SNR margin
|
|
for the bandwidth corresponding to the byte number
|
|
|
|
The value for each byte is coded as follows:
|
|
-127..+127 SNR margin in dB
|
|
-128 Unknown value"
|
|
::= { pmroLineProbeEntry 8 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- PM-RO Local L2Switch Values
|
|
--------------------------------------------------------------------------------
|
|
pmroLocalL2SwitchValueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PmroLocalL2SwitchValueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { pmro 8 }
|
|
|
|
pmroLocalL2SwitchValueEntry OBJECT-TYPE
|
|
SYNTAX PmroLocalL2SwitchValueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { pmroLocalL2SwitchValuePortIndex, pmroLocalL2SwitchValueLinkIndex, pmroLocalL2SwitchValueCounterIndex }
|
|
::= { pmroLocalL2SwitchValueTable 1 }
|
|
|
|
PmroLocalL2SwitchValueEntry ::=
|
|
SEQUENCE
|
|
{
|
|
pmroLocalL2SwitchValuePortIndex INTEGER,
|
|
pmroLocalL2SwitchValueLinkIndex INTEGER,
|
|
pmroLocalL2SwitchValueCounterIndex INTEGER,
|
|
pmroLocalL2SwitchRxCounter INTEGER,
|
|
pmroLocalL2SwitchTxCounter INTEGER,
|
|
pmroLocalL2SwitchErrCounter INTEGER
|
|
}
|
|
|
|
pmroLocalL2SwitchValuePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroLocalL2SwitchValueEntry 1 }
|
|
|
|
pmroLocalL2SwitchValueLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroLocalL2SwitchValueEntry 2 }
|
|
|
|
pmroLocalL2SwitchValueCounterIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the performance counter of a link
|
|
and is used as index for the other elements in the Table
|
|
|
|
1 WAN Port
|
|
2 LAN Port 1
|
|
3 LAN Port 2
|
|
4 LAN Port 3
|
|
5 LAN Port 4"
|
|
::= { pmroLocalL2SwitchValueEntry 3 }
|
|
|
|
pmroLocalL2SwitchRxCounter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the number of Rx packets / frames on a
|
|
L2Switch port, depending on the type of port:
|
|
|
|
WAN Port Number of Frames
|
|
LAN Port x Number of Packets
|
|
|
|
The counters count as far as the decimal equivalend of
|
|
0xfffffffd and then roll over to 0.
|
|
|
|
0xfffffffe Unsupported value
|
|
0xffffffff Unknown value"
|
|
::= { pmroLocalL2SwitchValueEntry 4 }
|
|
|
|
pmroLocalL2SwitchTxCounter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the number of Tx packets / frames on a
|
|
L2Switch port, depending on the type of port:
|
|
|
|
WAN Port Number of Frames
|
|
LAN Port x Number of Packets
|
|
|
|
The counters count as far as the decimal equivalend of
|
|
0xfffffffd and then roll over to 0.
|
|
|
|
0xfffffffe Unsupported value
|
|
0xffffffff Unknown value"
|
|
::= { pmroLocalL2SwitchValueEntry 5 }
|
|
|
|
pmroLocalL2SwitchErrCounter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the number of errored packets / frames on a
|
|
L2Switch port, depending on the type of port:
|
|
|
|
WAN Port Number of Frames
|
|
LAN Port x Number of Packets
|
|
|
|
The counters count as far as the decimal equivalend of
|
|
0xfffffffd and then roll over to 0.
|
|
|
|
0xfffffffe Unsupported value
|
|
0xffffffff Unknown value"
|
|
::= { pmroLocalL2SwitchValueEntry 6 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- PM-RO Far L2Switch Values
|
|
--------------------------------------------------------------------------------
|
|
pmroFarL2SwitchValueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PmroFarL2SwitchValueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { pmro 9 }
|
|
|
|
pmroFarL2SwitchValueEntry OBJECT-TYPE
|
|
SYNTAX PmroFarL2SwitchValueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { pmroFarL2SwitchValuePortIndex, pmroFarL2SwitchValueLinkIndex, pmroFarL2SwitchValueCounterIndex }
|
|
::= { pmroFarL2SwitchValueTable 1 }
|
|
|
|
PmroFarL2SwitchValueEntry ::=
|
|
SEQUENCE
|
|
{
|
|
pmroFarL2SwitchValuePortIndex INTEGER,
|
|
pmroFarL2SwitchValueLinkIndex INTEGER,
|
|
pmroFarL2SwitchValueCounterIndex INTEGER,
|
|
pmroFarL2SwitchRxCounter INTEGER,
|
|
pmroFarL2SwitchTxCounter INTEGER,
|
|
pmroFarL2SwitchErrCounter INTEGER
|
|
}
|
|
|
|
pmroFarL2SwitchValuePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroFarL2SwitchValueEntry 1 }
|
|
|
|
pmroFarL2SwitchValueLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroFarL2SwitchValueEntry 2 }
|
|
|
|
pmroFarL2SwitchValueCounterIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the performance counter of a link
|
|
and is used as index for the other elements in the Table
|
|
|
|
1 WAN Port
|
|
2 LAN Port 1
|
|
3 LAN Port 2
|
|
4 LAN Port 3
|
|
5 LAN Port 4"
|
|
::= { pmroFarL2SwitchValueEntry 3 }
|
|
|
|
pmroFarL2SwitchRxCounter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the number of Rx packets / frames on a
|
|
L2Switch port, depending on the type of port:
|
|
|
|
WAN Port Number of Frames
|
|
LAN Port x Number of Packets
|
|
|
|
The counters count as far as the decimal equivalend of
|
|
0xfffffffd and then roll over to 0.
|
|
|
|
0xfffffffe Unsupported value
|
|
0xffffffff Unknown value"
|
|
::= { pmroFarL2SwitchValueEntry 4 }
|
|
|
|
pmroFarL2SwitchTxCounter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the number of Tx packets / frames on a
|
|
L2Switch port, depending on the type of port:
|
|
|
|
WAN Port Number of Frames
|
|
LAN Port x Number of Packets
|
|
|
|
The counters count as far as the decimal equivalend of
|
|
0xfffffffd and then roll over to 0.
|
|
|
|
0xfffffffe Unsupported value
|
|
0xffffffff Unknown value"
|
|
::= { pmroFarL2SwitchValueEntry 5 }
|
|
|
|
pmroFarL2SwitchErrCounter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the number of errored packets / frames on a
|
|
L2Switch port, depending on the type of port:
|
|
|
|
WAN Port Number of Frames
|
|
LAN Port x Number of Packets
|
|
|
|
The counters count as far as the decimal equivalend of
|
|
0xfffffffd and then roll over to 0.
|
|
|
|
0xfffffffe Unsupported value
|
|
0xffffffff Unknown value"
|
|
::= { pmroFarL2SwitchValueEntry 6 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- PM-RO PBO Current Value
|
|
--------------------------------------------------------------------------------
|
|
pmroPBOCurrentValueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PmroPBOCurrentValueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { pmro 10 }
|
|
|
|
pmroPBOCurrentValueEntry OBJECT-TYPE
|
|
SYNTAX PmroPBOCurrentValueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { pmroPBOCurrentValuePortIndex, pmroPBOCurrentValueLinkIndex }
|
|
::= { pmroPBOCurrentValueTable 1 }
|
|
|
|
PmroPBOCurrentValueEntry ::=
|
|
SEQUENCE
|
|
{
|
|
pmroPBOCurrentValuePortIndex INTEGER,
|
|
pmroPBOCurrentValueLinkIndex INTEGER,
|
|
pmroPBOCurrentValueLtWp1 INTEGER,
|
|
pmroPBOCurrentValueLtWp2 INTEGER,
|
|
pmroPBOCurrentValueNtWp1 INTEGER,
|
|
pmroPBOCurrentValueNtWp2 INTEGER,
|
|
pmroPBOCurrentValueReg1Wp1DirLt INTEGER,
|
|
pmroPBOCurrentValueReg1Wp1DirNt INTEGER,
|
|
pmroPBOCurrentValueReg1Wp2DirLt INTEGER,
|
|
pmroPBOCurrentValueReg1Wp2DirNt INTEGER,
|
|
pmroPBOCurrentValueReg2Wp1DirLt INTEGER,
|
|
pmroPBOCurrentValueReg2Wp1DirNt INTEGER,
|
|
pmroPBOCurrentValueReg2Wp2DirLt INTEGER,
|
|
pmroPBOCurrentValueReg2Wp2DirNt INTEGER,
|
|
pmroPBOCurrentValueReg3Wp1DirLt INTEGER,
|
|
pmroPBOCurrentValueReg3Wp1DirNt INTEGER,
|
|
pmroPBOCurrentValueReg3Wp2DirLt INTEGER,
|
|
pmroPBOCurrentValueReg3Wp2DirNt INTEGER,
|
|
pmroPBOCurrentValueReg4Wp1DirLt INTEGER,
|
|
pmroPBOCurrentValueReg4Wp1DirNt INTEGER,
|
|
pmroPBOCurrentValueReg4Wp2DirLt INTEGER,
|
|
pmroPBOCurrentValueReg4Wp2DirNt INTEGER,
|
|
pmroPBOCurrentValueReg5Wp1DirLt INTEGER,
|
|
pmroPBOCurrentValueReg5Wp1DirNt INTEGER,
|
|
pmroPBOCurrentValueReg5Wp2DirLt INTEGER,
|
|
pmroPBOCurrentValueReg5Wp2DirNt INTEGER,
|
|
pmroPBOCurrentValueReg6Wp1DirLt INTEGER,
|
|
pmroPBOCurrentValueReg6Wp1DirNt INTEGER,
|
|
pmroPBOCurrentValueReg6Wp2DirLt INTEGER,
|
|
pmroPBOCurrentValueReg6Wp2DirNt INTEGER,
|
|
pmroPBOCurrentValueReg7Wp1DirLt INTEGER,
|
|
pmroPBOCurrentValueReg7Wp1DirNt INTEGER,
|
|
pmroPBOCurrentValueReg7Wp2DirLt INTEGER,
|
|
pmroPBOCurrentValueReg7Wp2DirNt INTEGER,
|
|
pmroPBOCurrentValueReg8Wp1DirLt INTEGER,
|
|
pmroPBOCurrentValueReg8Wp1DirNt INTEGER,
|
|
pmroPBOCurrentValueReg8Wp2DirLt INTEGER,
|
|
pmroPBOCurrentValueReg8Wp2DirNt INTEGER,
|
|
pmroPBOCurrentValueLtWp3 INTEGER,
|
|
pmroPBOCurrentValueLtWp4 INTEGER,
|
|
pmroPBOCurrentValueNtWp3 INTEGER,
|
|
pmroPBOCurrentValueNtWp4 INTEGER,
|
|
pmroPBOCurrentValueReg1Wp3DirLt INTEGER,
|
|
pmroPBOCurrentValueReg1Wp3DirNt INTEGER,
|
|
pmroPBOCurrentValueReg1Wp4DirLt INTEGER,
|
|
pmroPBOCurrentValueReg1Wp4DirNt INTEGER,
|
|
pmroPBOCurrentValueReg2Wp3DirLt INTEGER,
|
|
pmroPBOCurrentValueReg2Wp3DirNt INTEGER,
|
|
pmroPBOCurrentValueReg2Wp4DirLt INTEGER,
|
|
pmroPBOCurrentValueReg2Wp4DirNt INTEGER,
|
|
pmroPBOCurrentValueReg3Wp3DirLt INTEGER,
|
|
pmroPBOCurrentValueReg3Wp3DirNt INTEGER,
|
|
pmroPBOCurrentValueReg3Wp4DirLt INTEGER,
|
|
pmroPBOCurrentValueReg3Wp4DirNt INTEGER,
|
|
pmroPBOCurrentValueReg4Wp3DirLt INTEGER,
|
|
pmroPBOCurrentValueReg4Wp3DirNt INTEGER,
|
|
pmroPBOCurrentValueReg4Wp4DirLt INTEGER,
|
|
pmroPBOCurrentValueReg4Wp4DirNt INTEGER,
|
|
pmroPBOCurrentValueReg5Wp3DirLt INTEGER,
|
|
pmroPBOCurrentValueReg5Wp3DirNt INTEGER,
|
|
pmroPBOCurrentValueReg5Wp4DirLt INTEGER,
|
|
pmroPBOCurrentValueReg5Wp4DirNt INTEGER,
|
|
pmroPBOCurrentValueReg6Wp3DirLt INTEGER,
|
|
pmroPBOCurrentValueReg6Wp3DirNt INTEGER,
|
|
pmroPBOCurrentValueReg6Wp4DirLt INTEGER,
|
|
pmroPBOCurrentValueReg6Wp4DirNt INTEGER,
|
|
pmroPBOCurrentValueReg7Wp3DirLt INTEGER,
|
|
pmroPBOCurrentValueReg7Wp3DirNt INTEGER,
|
|
pmroPBOCurrentValueReg7Wp4DirLt INTEGER,
|
|
pmroPBOCurrentValueReg7Wp4DirNt INTEGER,
|
|
pmroPBOCurrentValueReg8Wp3DirLt INTEGER,
|
|
pmroPBOCurrentValueReg8Wp3DirNt INTEGER,
|
|
pmroPBOCurrentValueReg8Wp4DirLt INTEGER,
|
|
pmroPBOCurrentValueReg8Wp4DirNt INTEGER
|
|
}
|
|
|
|
pmroPBOCurrentValuePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroPBOCurrentValueEntry 1 }
|
|
|
|
pmroPBOCurrentValueLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmroPBOCurrentValueEntry 2 }
|
|
|
|
pmroPBOCurrentValueLtWp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for LT, Wire pair 1, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 3 }
|
|
|
|
pmroPBOCurrentValueLtWp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for LT, Wire pair 2, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 4 }
|
|
|
|
pmroPBOCurrentValueNtWp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for NT, Wire pair 1, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 5 }
|
|
|
|
pmroPBOCurrentValueNtWp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for NT, Wire pair 2, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 6 }
|
|
|
|
pmroPBOCurrentValueReg1Wp1DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg1, Wire pair 1, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 7 }
|
|
|
|
pmroPBOCurrentValueReg1Wp1DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg1, Wire pair 1, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 8 }
|
|
|
|
pmroPBOCurrentValueReg1Wp2DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg1, Wire pair 2, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 9 }
|
|
|
|
pmroPBOCurrentValueReg1Wp2DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg1, Wire pair 2, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 10 }
|
|
|
|
pmroPBOCurrentValueReg2Wp1DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg2, Wire pair 1, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 11 }
|
|
|
|
pmroPBOCurrentValueReg2Wp1DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg2, Wire pair 1, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 12 }
|
|
|
|
pmroPBOCurrentValueReg2Wp2DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg2, Wire pair 2, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 13 }
|
|
|
|
pmroPBOCurrentValueReg2Wp2DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg2, Wire pair 2, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 14 }
|
|
|
|
pmroPBOCurrentValueReg3Wp1DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg3, Wire pair 1, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 15 }
|
|
|
|
pmroPBOCurrentValueReg3Wp1DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg3, Wire pair 1, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 16 }
|
|
|
|
pmroPBOCurrentValueReg3Wp2DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg3, Wire pair 2, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 17 }
|
|
|
|
pmroPBOCurrentValueReg3Wp2DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg3, Wire pair 2, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 18 }
|
|
|
|
pmroPBOCurrentValueReg4Wp1DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg4, Wire pair 1, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 19 }
|
|
|
|
pmroPBOCurrentValueReg4Wp1DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg4, Wire pair 1, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 20 }
|
|
|
|
pmroPBOCurrentValueReg4Wp2DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg4, Wire pair 2, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 21 }
|
|
|
|
pmroPBOCurrentValueReg4Wp2DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg4, Wire pair 2, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 22 }
|
|
|
|
pmroPBOCurrentValueReg5Wp1DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg5, Wire pair 1, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 23 }
|
|
|
|
pmroPBOCurrentValueReg5Wp1DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg5, Wire pair 1, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 24 }
|
|
|
|
pmroPBOCurrentValueReg5Wp2DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg5, Wire pair 2, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 25 }
|
|
|
|
pmroPBOCurrentValueReg5Wp2DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg5, Wire pair 2, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 26 }
|
|
|
|
pmroPBOCurrentValueReg6Wp1DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg6, Wire pair 1, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 27 }
|
|
|
|
pmroPBOCurrentValueReg6Wp1DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg6, Wire pair 1, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 28 }
|
|
|
|
pmroPBOCurrentValueReg6Wp2DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg6, Wire pair 2, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 29 }
|
|
|
|
pmroPBOCurrentValueReg6Wp2DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg6, Wire pair 2, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 30 }
|
|
|
|
pmroPBOCurrentValueReg7Wp1DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg7, Wire pair 1, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 31 }
|
|
|
|
pmroPBOCurrentValueReg7Wp1DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg7, Wire pair 1, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 32 }
|
|
|
|
pmroPBOCurrentValueReg7Wp2DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg7, Wire pair 2, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 33 }
|
|
|
|
pmroPBOCurrentValueReg7Wp2DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg7, Wire pair 2, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 34 }
|
|
|
|
pmroPBOCurrentValueReg8Wp1DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg8, Wire pair 1, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 35 }
|
|
|
|
pmroPBOCurrentValueReg8Wp1DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg8, Wire pair 1, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 36 }
|
|
|
|
pmroPBOCurrentValueReg8Wp2DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg8, Wire pair 2, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 37 }
|
|
|
|
pmroPBOCurrentValueReg8Wp2DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg8, Wire pair 2, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 38 }
|
|
|
|
pmroPBOCurrentValueLtWp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for LT, Wire pair 3, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 39 }
|
|
|
|
pmroPBOCurrentValueLtWp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for LT, Wire pair 4, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 40 }
|
|
|
|
pmroPBOCurrentValueNtWp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for NT, Wire pair 3, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 41 }
|
|
|
|
pmroPBOCurrentValueNtWp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for NT, Wire pair 4, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 42 }
|
|
|
|
pmroPBOCurrentValueReg1Wp3DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg1, Wire pair 3, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 43 }
|
|
|
|
pmroPBOCurrentValueReg1Wp3DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg1, Wire pair 3, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 44 }
|
|
|
|
pmroPBOCurrentValueReg1Wp4DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg1, Wire pair 4, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 45 }
|
|
|
|
pmroPBOCurrentValueReg1Wp4DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg1, Wire pair 4, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 46 }
|
|
|
|
pmroPBOCurrentValueReg2Wp3DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg2, Wire pair 3, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 47 }
|
|
|
|
pmroPBOCurrentValueReg2Wp3DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg2, Wire pair 3, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 48 }
|
|
|
|
pmroPBOCurrentValueReg2Wp4DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg2, Wire pair 4, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 49 }
|
|
|
|
pmroPBOCurrentValueReg2Wp4DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg2, Wire pair 4, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 50 }
|
|
|
|
pmroPBOCurrentValueReg3Wp3DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg3, Wire pair 3, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 51 }
|
|
|
|
pmroPBOCurrentValueReg3Wp3DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg3, Wire pair 3, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 52 }
|
|
|
|
pmroPBOCurrentValueReg3Wp4DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg3, Wire pair 4, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 53 }
|
|
|
|
pmroPBOCurrentValueReg3Wp4DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg3, Wire pair 4, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 54 }
|
|
|
|
pmroPBOCurrentValueReg4Wp3DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg4, Wire pair 3, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 55 }
|
|
|
|
pmroPBOCurrentValueReg4Wp3DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg4, Wire pair 3, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 56 }
|
|
|
|
pmroPBOCurrentValueReg4Wp4DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg4, Wire pair 4, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 57 }
|
|
|
|
pmroPBOCurrentValueReg4Wp4DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg4, Wire pair 4, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 58 }
|
|
|
|
pmroPBOCurrentValueReg5Wp3DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg5, Wire pair 3, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 59 }
|
|
|
|
pmroPBOCurrentValueReg5Wp3DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg5, Wire pair 3, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 60 }
|
|
|
|
pmroPBOCurrentValueReg5Wp4DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg5, Wire pair 4, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 61 }
|
|
|
|
pmroPBOCurrentValueReg5Wp4DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg5, Wire pair 4, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 62 }
|
|
|
|
pmroPBOCurrentValueReg6Wp3DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg6, Wire pair 3, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 63 }
|
|
|
|
pmroPBOCurrentValueReg6Wp3DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg6, Wire pair 3, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 64 }
|
|
|
|
pmroPBOCurrentValueReg6Wp4DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg6, Wire pair 4, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 65 }
|
|
|
|
pmroPBOCurrentValueReg6Wp4DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg6, Wire pair 4, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 66 }
|
|
|
|
pmroPBOCurrentValueReg7Wp3DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg7, Wire pair 3, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 67 }
|
|
|
|
pmroPBOCurrentValueReg7Wp3DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg7, Wire pair 3, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 68 }
|
|
|
|
pmroPBOCurrentValueReg7Wp4DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg7, Wire pair 4, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 69 }
|
|
|
|
pmroPBOCurrentValueReg7Wp4DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg7, Wire pair 4, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 70 }
|
|
|
|
pmroPBOCurrentValueReg8Wp3DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg8, Wire pair 3, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 71 }
|
|
|
|
pmroPBOCurrentValueReg8Wp3DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg8, Wire pair 3, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 72 }
|
|
|
|
pmroPBOCurrentValueReg8Wp4DirLt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg8, Wire pair 4, Direction LT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 73 }
|
|
|
|
pmroPBOCurrentValueReg8Wp4DirNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
db0(1), db1(2), db2(3), db3(4), db4(5), db5(6), db6(7), db7(8), db8(9), db9(10), db10(11), db11(12), db12(13), db13(14), db14(15), db15(16),
|
|
db16(17), db17(18), db18(19), db19(20), db20(21), db21(22), db22(23), db23(24), db24(25), db25(26), db26(27), db27(28), db28(29), db29(30), db30(31), db31(32),
|
|
dbMin1(130), dbMin2(131), dbMin3(132), dbMin4(133),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current PowerBackOff value for Reg8, Wire pair 4, Direction NT
|
|
1..32 Db0..Db31 Current PBO value
|
|
130..133 DbMin1..DbMin4 Current PBO value (negative, Power Boost).
|
|
254 unknown value
|
|
255 unsupported variable for addressed device
|
|
"
|
|
::= { pmroPBOCurrentValueEntry 74 }
|
|
|
|
|
|
--==============================================================================
|
|
--==============================================================================
|
|
--
|
|
-- PM-RW
|
|
--
|
|
--==============================================================================
|
|
--==============================================================================
|
|
pmrw OBJECT IDENTIFIER ::= { linksVers3 6 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- PM-RW PM Reset and BER Measurement Starting
|
|
--------------------------------------------------------------------------------
|
|
pmrwActionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PmrwActionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { pmrw 1 }
|
|
|
|
pmrwActionEntry OBJECT-TYPE
|
|
SYNTAX PmrwActionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { pmrwActionPortIndex, pmrwActionLinkIndex }
|
|
::= { pmrwActionTable 1 }
|
|
|
|
PmrwActionEntry ::=
|
|
SEQUENCE
|
|
{
|
|
pmrwActionPortIndex INTEGER,
|
|
pmrwActionLinkIndex INTEGER,
|
|
pmrwActionResetPM INTEGER,
|
|
pmrwActionBerStart INTEGER,
|
|
pmrwActionProbingStart OCTET STRING,
|
|
pmrwActionResetPMPacket INTEGER
|
|
}
|
|
|
|
pmrwActionPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmrwActionEntry 1 }
|
|
|
|
pmrwActionLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { pmrwActionEntry 2 }
|
|
|
|
|
|
pmrwActionResetPM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
reset(1),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a write-only variable which is used to reset
|
|
all currently running CRC-based performance counters
|
|
and starts a new measurement interval.
|
|
|
|
This command resets all 15 minute and 24 hour counters
|
|
for all current counters and the stored last interval.
|
|
|
|
The only legal parameter is 'reset(1)'."
|
|
::= { pmrwActionEntry 3 }
|
|
|
|
pmrwActionBerStart OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
abort(1),
|
|
oneMin(2),
|
|
tenMin(3),
|
|
oneHour(4),
|
|
oneDay(5),
|
|
oneMinDirV(6),
|
|
tenMinDirV(7),
|
|
oneHourDirV(8),
|
|
oneDayDirV(9),
|
|
oneMinRoundTrip(10),
|
|
tenMinRoundTrip(11),
|
|
oneHourRoundTrip(12),
|
|
oneDayRoundTrip(13),
|
|
oneMinMcs(14),
|
|
tenMinMcs(15),
|
|
oneHourMcs(16),
|
|
oneDayMcs(17),
|
|
oneMinData(18),
|
|
tenMinData(19),
|
|
oneHourData(20),
|
|
oneDayData(21),
|
|
oneMinMcsLocal(22),
|
|
tenMinMcsLocal(23),
|
|
oneHourMcsLocal(24),
|
|
oneDayMcsLocal(25),
|
|
oneMinG703If(26),
|
|
tenMinG703If(27),
|
|
oneHourG703If(28),
|
|
oneDayG703If(29),
|
|
oneMinDataIf(30),
|
|
tenMinDataIf(31),
|
|
oneHourDataIf(32),
|
|
oneDayDataIf(33),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a write-only variable which is used to start (and
|
|
stop) the Bit Error Ration measurement.
|
|
|
|
1 Abort Stop a running BER measurement
|
|
2 OneMin Start a BER measurement for the duration of 1 minute
|
|
3 TenMin Start a BER measurement for the duration of 10 minutes
|
|
4 OneHour Start a BER measurement for the duration of 1 hour
|
|
5 OneDay Start a BER measurement for the duration of 24 hours
|
|
6 OneMinDirV Start a BER measurement duration is/was 1 minute (direction V)
|
|
7 TenMinDirV Start a BER measurement duration is/was 10 minutes (direction V)
|
|
8 OneHourDirV Start a BER measurement duration is/was 1 hour (direction V)
|
|
9 OneDayDirV Start a BER measurement duration is/was 24 hours (direction V)
|
|
10 OneMinRoundTrip Start a BER measurement duration is/was 1 minute (round trip)
|
|
11 TenMinRoundTrip Start a BER measurement duration is/was 10 minutes (round trip)
|
|
12 OneHourRoundTrip Start a BER measurement duration is/was 1 hour (round trip)
|
|
13 OneDayRoundTrip Start a BER measurement duration is/was 24 hours (round trip)
|
|
14 OneMinMcs Start a BER measurement duration is/was 1 minute (MCS)
|
|
15 TenMinMcs Start a BER measurement duration is/was 10 minutes (MCS)
|
|
16 OneHourMcs Start a BER measurement duration is/was 1 hour (MCS)
|
|
17 OneDayMcs Start a BER measurement duration is/was 24 hours (MCS)
|
|
18 OneMinData Start a BER measurement duration is/was 1 minute (U side Data, var speed)
|
|
19 TenMinData Start a BER measurement duration is/was 10 minutes (U side Data, var speed)
|
|
20 OneHourData Start a BER measurement duration is/was 1 hour (U side Data, var speed)
|
|
21 OneDayData Start a BER measurement duration is/was 24 hours (U side Data, var speed)
|
|
22 OneMinMcsLocal Start a BER measurement duration is/was 1 minute (MCS local)
|
|
23 TenMinMcsLocal Start a BER measurement duration is/was 10 minutes (MCS local)
|
|
24 OneHourMcsLocal Start a BER measurement duration is/was 1 hour (MCS local)
|
|
25 OneDayMcsLocal Start a BER measurement duration is/was 24 hours (MCS local)
|
|
26 OneMinG703If Start a BER measurement duration is/was 1 minute (G.703 Interface)
|
|
27 TenMinG703If Start a BER measurement duration is/was 10 minutes (G.703 Interface)
|
|
28 OneHourG703If Start a BER measurement duration is/was 1 hour (G.703 Interface)
|
|
29 OneDayG703If Start a BER measurement duration is/was 24 hours (G.703 Interface)
|
|
30 OneMinDataIf Start a BER measurement duration is/was 1 minute (Data Interface)
|
|
31 TenMinDataIf Start a BER measurement duration is/was 10 minutes (Data Interface)
|
|
32 OneHourDataIf Start a BER measurement duration is/was 1 hour (Data Interface)
|
|
33 OneDayDataIf Start a BER measurement duration is/was 24 hours (Data Interface)
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { pmrwActionEntry 4 }
|
|
|
|
pmrwActionProbingStart OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(6))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Selection of bandwidths to use for line probing
|
|
|
|
Bandwidth
|
|
Byte 0
|
|
bit 0 reserved
|
|
bit 1 reserved
|
|
bit 2 192 kbit/s
|
|
bit 3 256 kbit/s
|
|
bit 4 320 kbit/s
|
|
bit 5 384 kbit/s
|
|
bit 6 448 kbit/s
|
|
bit 7 512 kbit/s
|
|
Byte 1
|
|
bit 0 576 kbit/s
|
|
bit 1 640 kbit/s
|
|
bit 2 704 kbit/s
|
|
bit 3 768 kbit/s
|
|
bit 4 832 kbit/s
|
|
bit 5 896 kbit/s
|
|
bit 6 960 kbit/s
|
|
bit 7 1024 kbit/s
|
|
Byte 2
|
|
bit 0 1088 kbit/s
|
|
bit 1 1152 kbit/s
|
|
bit 2 1216 kbit/s
|
|
bit 3 1280 kbit/s
|
|
bit 4 1344 kbit/s
|
|
bit 5 1408 kbit/s
|
|
bit 6 1472 kbit/s
|
|
bit 7 1536 kbit/s
|
|
Byte 3
|
|
bit 0 1600 kbit/s
|
|
bit 1 1664 kbit/s
|
|
bit 2 1728 kbit/s
|
|
bit 3 1792 kbit/s
|
|
bit 4 1856 kbit/s
|
|
bit 5 1920 kbit/s
|
|
bit 6 1984 kbit/s
|
|
bit 7 2048 kbit/s
|
|
Byte 4
|
|
bit 0 2112 kbit/s
|
|
bit 1 2176 kbit/s
|
|
bit 2 2240 kbit/s
|
|
bit 3 2304 kbit/s
|
|
bit 4 unused
|
|
bit 5 unused
|
|
bit 6 unused
|
|
bit 7 unused
|
|
Byte 5 contains a value specifying the validity of the
|
|
result of a read operation:
|
|
1 Ok Values returned are valid
|
|
254 unknown values
|
|
255 unsupported variable for addressed device"
|
|
|
|
::= { pmrwActionEntry 5 }
|
|
|
|
pmrwActionResetPMPacket OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
resetLocal(1),
|
|
resetFar(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a write-only variable which is used to reset
|
|
all currently running Local L2Switch performance counters.
|
|
1 resetLocal Reset local counters
|
|
2 resetFar Reset far counters"
|
|
::= { pmrwActionEntry 6 }
|
|
|
|
--==============================================================================
|
|
--==============================================================================
|
|
--
|
|
-- Download
|
|
--
|
|
--==============================================================================
|
|
--==============================================================================
|
|
download OBJECT IDENTIFIER ::= { linksVers3 7 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Far Download State
|
|
--------------------------------------------------------------------------------
|
|
downloadFarTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DownloadFarEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { download 1 }
|
|
|
|
downloadFarEntry OBJECT-TYPE
|
|
SYNTAX DownloadFarEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { downloadFarPortIndex, downloadFarLinkIndex }
|
|
::= { downloadFarTable 1 }
|
|
|
|
DownloadFarEntry ::=
|
|
SEQUENCE
|
|
{
|
|
downloadFarPortIndex INTEGER,
|
|
downloadFarLinkIndex INTEGER,
|
|
downloadFarState INTEGER,
|
|
downloadFarTotalBlocks INTEGER,
|
|
downloadFarProgress INTEGER,
|
|
downloadFarTarget INTEGER
|
|
}
|
|
|
|
downloadFarPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { downloadFarEntry 1 }
|
|
|
|
downloadFarLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {downloadFarEntry 2 }
|
|
|
|
downloadFarState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notStarted(1),
|
|
pending(2),
|
|
abortedLd(3),
|
|
erasingFlash(4),
|
|
running(5),
|
|
failed(6),
|
|
complete(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Returns the state of the download
|
|
1 NotStarted Never started a download for this device
|
|
2 Pending Waiting for download start response from NT
|
|
3 AbortedLd Remote download not started because of lokal download running
|
|
4 ErasingFlash Flash EEPROM of this device is being erased
|
|
5 Running Download for this device is running
|
|
6 Failed Last download for this device failed
|
|
7 Complete Last download for this device was successful
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadFarEntry 3 }
|
|
|
|
downloadFarTotalBlocks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Returns the size of the firmware being downloaded to the far device
|
|
in blocks of 128 bytes
|
|
0xFFFE unknown value
|
|
0xFFFF unsupported variable for addressed device"
|
|
::= { downloadFarEntry 4 }
|
|
|
|
downloadFarProgress OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Returns the number of 128 byte blocks that have already been downloaded
|
|
0xFFFE unknown value
|
|
0xFFFF unsupported variable for addressed device"
|
|
::= { downloadFarEntry 5 }
|
|
|
|
downloadFarTarget OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notDownloading(1),
|
|
nt(2),
|
|
reg11(4),
|
|
reg12(5),
|
|
reg21(6),
|
|
reg22(7),
|
|
reg31(8),
|
|
reg32(9),
|
|
reg41(10),
|
|
reg42(11),
|
|
reg51(12),
|
|
reg52(13),
|
|
reg61(14),
|
|
reg62(15),
|
|
reg71(16),
|
|
reg72(17),
|
|
reg81(18),
|
|
reg82(19),
|
|
reg13(20),
|
|
reg14(21),
|
|
reg23(22),
|
|
reg24(23),
|
|
reg33(24),
|
|
reg34(25),
|
|
reg43(26),
|
|
reg44(27),
|
|
reg53(28),
|
|
reg54(29),
|
|
reg63(30),
|
|
reg64(31),
|
|
reg73(32),
|
|
reg74(33),
|
|
reg83(34),
|
|
reg84(35),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Returns the device for which a remote download is active
|
|
NotDownloading 1 No remote download is active
|
|
Nt 2 Remote download to NT active
|
|
Reg11 4 Remote download to regenerator section 1 wire pair 1
|
|
Reg12 5 Remote download to regenerator section 1 wire pair 2
|
|
Reg21 6 Remote download to regenerator section 2 wire pair 1
|
|
Reg22 7 Remote download to regenerator section 2 wire pair 2
|
|
Reg31 8 Remote download to regenerator section 3 wire pair 1
|
|
Reg32 9 Remote download to regenerator section 3 wire pair 2
|
|
Reg41 10 Remote download to regenerator section 4 wire pair 1
|
|
Reg42 11 Remote download to regenerator section 4 wire pair 2
|
|
Reg51 12 Remote download to regenerator section 5 wire pair 1
|
|
Reg52 13 Remote download to regenerator section 5 wire pair 2
|
|
Reg61 14 Remote download to regenerator section 6 wire pair 1
|
|
Reg62 15 Remote download to regenerator section 6 wire pair 2
|
|
Reg71 16 Remote download to regenerator section 7 wire pair 1
|
|
Reg72 17 Remote download to regenerator section 7 wire pair 2
|
|
Reg81 18 Remote download to regenerator section 8 wire pair 1
|
|
Reg82 19 Remote download to regenerator section 8 wire pair 2
|
|
Reg13 20 Remote download to regenerator section 1 wire pair 3
|
|
Reg14 21 Remote download to regenerator section 1 wire pair 4
|
|
Reg23 22 Remote download to regenerator section 2 wire pair 3
|
|
Reg24 23 Remote download to regenerator section 2 wire pair 4
|
|
Reg33 24 Remote download to regenerator section 3 wire pair 3
|
|
Reg34 25 Remote download to regenerator section 3 wire pair 4
|
|
Reg43 26 Remote download to regenerator section 4 wire pair 3
|
|
Reg44 27 Remote download to regenerator section 4 wire pair 4
|
|
Reg53 28 Remote download to regenerator section 5 wire pair 3
|
|
Reg54 29 Remote download to regenerator section 5 wire pair 4
|
|
Reg63 30 Remote download to regenerator section 6 wire pair 3
|
|
Reg64 31 Remote download to regenerator section 6 wire pair 4
|
|
Reg73 32 Remote download to regenerator section 7 wire pair 3
|
|
Reg74 33 Remote download to regenerator section 7 wire pair 4
|
|
Reg83 34 Remote download to regenerator section 8 wire pair 3
|
|
Reg84 35 Remote download to regenerator section 8 wire pair 4
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadFarEntry 6 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Download Starting and Aborting
|
|
--------------------------------------------------------------------------------
|
|
downloadActionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DownloadActionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { download 2 }
|
|
|
|
downloadActionEntry OBJECT-TYPE
|
|
SYNTAX DownloadActionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { downloadActionPortIndex, downloadActionLinkIndex }
|
|
::= { downloadActionTable 1 }
|
|
|
|
DownloadActionEntry ::=
|
|
SEQUENCE
|
|
{
|
|
downloadActionPortIndex INTEGER,
|
|
downloadActionLinkIndex INTEGER,
|
|
downloadActionStart INTEGER,
|
|
downloadActionAbort INTEGER
|
|
}
|
|
|
|
downloadActionPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { downloadActionEntry 1 }
|
|
|
|
downloadActionLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { downloadActionEntry 2 }
|
|
|
|
|
|
downloadActionStart OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
activBank(1),
|
|
passiveBank(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a write-only variable which is used to start
|
|
remote download from the selcted bank.
|
|
1 ActiveBank Use active bank of LT for remote download
|
|
2 PassiveBank Use passive bank of LT for remote download
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadActionEntry 3 }
|
|
|
|
downloadActionAbort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
abort(1),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a write-only variable which is used to abort
|
|
the currently running remote download.
|
|
|
|
The only legal parameter is 'abort(1)'."
|
|
::= { downloadActionEntry 4 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- SRU Download Starting and Aborting
|
|
--------------------------------------------------------------------------------
|
|
downloadSruActionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DownloadSruActionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { download 3 }
|
|
|
|
downloadSruActionEntry OBJECT-TYPE
|
|
SYNTAX DownloadSruActionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { downloadSruActionPortIndex, downloadSruActionLinkIndex, downloadSruActionRegIndex }
|
|
::= { downloadSruActionTable 1 }
|
|
|
|
DownloadSruActionEntry ::=
|
|
SEQUENCE
|
|
{
|
|
downloadSruActionPortIndex INTEGER,
|
|
downloadSruActionLinkIndex INTEGER,
|
|
downloadSruActionRegIndex INTEGER,
|
|
downloadSruActionStart INTEGER,
|
|
downloadSruActionAbort INTEGER
|
|
}
|
|
|
|
downloadSruActionPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { downloadSruActionEntry 1 }
|
|
|
|
downloadSruActionLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= { downloadSruActionEntry 2 }
|
|
|
|
|
|
downloadSruActionRegIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
reg11(3),
|
|
reg12(4),
|
|
reg21(5),
|
|
reg22(6),
|
|
reg31(7),
|
|
reg32(8),
|
|
reg41(9),
|
|
reg42(10),
|
|
reg51(11),
|
|
reg52(12),
|
|
reg61(13),
|
|
reg62(14),
|
|
reg71(15),
|
|
reg72(16),
|
|
reg81(17),
|
|
reg82(18),
|
|
reg13(19),
|
|
reg14(20),
|
|
reg23(21),
|
|
reg24(22),
|
|
reg33(23),
|
|
reg34(24),
|
|
reg43(25),
|
|
reg44(26),
|
|
reg53(27),
|
|
reg54(28),
|
|
reg63(29),
|
|
reg64(30),
|
|
reg73(31),
|
|
reg74(32),
|
|
reg83(33),
|
|
reg84(34)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the regenerator device"
|
|
::= { downloadSruActionEntry 3 }
|
|
|
|
|
|
downloadSruActionStart OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
activBank(1),
|
|
passiveBank(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a write-only variable which is used to start
|
|
remote download from the selcted bank.
|
|
1 ActiveBank Use active bank of LT for remote download
|
|
2 PassiveBank Use passive bank of LT for remote download
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSruActionEntry 4 }
|
|
|
|
downloadSruActionAbort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
abort(1),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a write-only variable which is used to abort
|
|
the currently running remote download.
|
|
|
|
The only legal parameter is 'abort(1)'."
|
|
::= { downloadSruActionEntry 5 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Download State
|
|
--------------------------------------------------------------------------------
|
|
downloadStateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DownloadStateEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { download 4 }
|
|
|
|
downloadStateEntry OBJECT-TYPE
|
|
SYNTAX DownloadStateEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { downloadStatePortIndex, downloadStateLinkIndex }
|
|
::= { downloadStateTable 1 }
|
|
|
|
DownloadStateEntry ::=
|
|
SEQUENCE
|
|
{
|
|
downloadStatePortIndex INTEGER,
|
|
downloadStateLinkIndex INTEGER,
|
|
downloadStateInstance INTEGER,
|
|
downloadStateTarget INTEGER,
|
|
downloadStateState INTEGER,
|
|
downloadStateTotalBlocks INTEGER,
|
|
downloadStateProgress INTEGER
|
|
}
|
|
|
|
downloadStatePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { downloadStateEntry 1 }
|
|
|
|
downloadStateLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {downloadStateEntry 2 }
|
|
|
|
downloadStateInstance OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
system1(1),
|
|
system2(2),
|
|
system3(3),
|
|
system4(4),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Returns the instance of the system for which a download is active"
|
|
::= { downloadStateEntry 3 }
|
|
|
|
downloadStateTarget OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notDownloading(1),
|
|
lt(2),
|
|
nt(3),
|
|
reg11(4),
|
|
reg12(5),
|
|
reg21(6),
|
|
reg22(7),
|
|
reg31(8),
|
|
reg32(9),
|
|
reg41(10),
|
|
reg42(11),
|
|
reg51(12),
|
|
reg52(13),
|
|
reg61(14),
|
|
reg62(15),
|
|
reg71(16),
|
|
reg72(17),
|
|
reg81(18),
|
|
reg82(19),
|
|
reg13(20),
|
|
reg14(21),
|
|
reg23(22),
|
|
reg24(23),
|
|
reg33(24),
|
|
reg34(25),
|
|
reg43(26),
|
|
reg44(27),
|
|
reg53(28),
|
|
reg54(29),
|
|
reg63(30),
|
|
reg64(31),
|
|
reg73(32),
|
|
reg74(33),
|
|
reg83(34),
|
|
reg84(35),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Returns the device for which a download is active
|
|
NotDownloading 1 No download is active
|
|
Lt 2 Local download
|
|
Nt 3 Remote download to NT active
|
|
Reg11 4 Remote download to regenerator section 1 wire pair 1
|
|
Reg12 5 Remote download to regenerator section 1 wire pair 2
|
|
Reg21 6 Remote download to regenerator section 2 wire pair 1
|
|
Reg22 7 Remote download to regenerator section 2 wire pair 2
|
|
Reg31 8 Remote download to regenerator section 3 wire pair 1
|
|
Reg32 9 Remote download to regenerator section 3 wire pair 2
|
|
Reg41 10 Remote download to regenerator section 4 wire pair 1
|
|
Reg42 11 Remote download to regenerator section 4 wire pair 2
|
|
Reg51 12 Remote download to regenerator section 5 wire pair 1
|
|
Reg52 13 Remote download to regenerator section 5 wire pair 2
|
|
Reg61 14 Remote download to regenerator section 6 wire pair 1
|
|
Reg62 15 Remote download to regenerator section 6 wire pair 2
|
|
Reg71 16 Remote download to regenerator section 7 wire pair 1
|
|
Reg72 17 Remote download to regenerator section 7 wire pair 2
|
|
Reg81 18 Remote download to regenerator section 8 wire pair 1
|
|
Reg82 19 Remote download to regenerator section 8 wire pair 2
|
|
Reg13 20 Remote download to regenerator section 1 wire pair 3
|
|
Reg14 21 Remote download to regenerator section 1 wire pair 4
|
|
Reg23 22 Remote download to regenerator section 2 wire pair 3
|
|
Reg24 23 Remote download to regenerator section 2 wire pair 4
|
|
Reg33 24 Remote download to regenerator section 3 wire pair 3
|
|
Reg34 25 Remote download to regenerator section 3 wire pair 4
|
|
Reg43 26 Remote download to regenerator section 4 wire pair 3
|
|
Reg44 27 Remote download to regenerator section 4 wire pair 4
|
|
Reg53 28 Remote download to regenerator section 5 wire pair 3
|
|
Reg54 29 Remote download to regenerator section 5 wire pair 4
|
|
Reg63 30 Remote download to regenerator section 6 wire pair 3
|
|
Reg64 31 Remote download to regenerator section 6 wire pair 4
|
|
Reg73 32 Remote download to regenerator section 7 wire pair 3
|
|
Reg74 33 Remote download to regenerator section 7 wire pair 4
|
|
Reg83 34 Remote download to regenerator section 8 wire pair 3
|
|
Reg84 35 Remote download to regenerator section 8 wire pair 4
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadStateEntry 4 }
|
|
|
|
downloadStateState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notStarted(1),
|
|
pending(2),
|
|
abortedLd(3),
|
|
erasingFlash(4),
|
|
running(5),
|
|
failed(6),
|
|
complete(7),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Returns the state of the download
|
|
1 NotStarted Never started a download for this device
|
|
2 Pending Waiting for download start response from NT
|
|
3 AbortedLd Remote download not started because of lokal download running
|
|
4 ErasingFlash Flash EEPROM of this device is being erased
|
|
5 Running Download for this device is running
|
|
6 Failed Last download for this device failed
|
|
7 Complete Last download for this device was successful
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadStateEntry 5 }
|
|
|
|
downloadStateTotalBlocks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Returns the size of the firmware being downloaded to the device
|
|
in blocks of 128 bytes
|
|
0xFFFE unknown value
|
|
0xFFFF unsupported variable for addressed device"
|
|
::= { downloadStateEntry 6 }
|
|
|
|
downloadStateProgress OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Returns the number of 128 byte blocks that have already been downloaded
|
|
0xFFFE unknown value
|
|
0xFFFF unsupported variable for addressed device"
|
|
::= { downloadStateEntry 7 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Download Remote Dwl Possible
|
|
--------------------------------------------------------------------------------
|
|
downloadRemDwlPossibleTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DownloadRemDwlPossibleEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { download 5 }
|
|
|
|
downloadRemDwlPossibleEntry OBJECT-TYPE
|
|
SYNTAX DownloadRemDwlPossibleEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { downloadRemDwlPossiblePortIndex, downloadRemDwlPossibleLinkIndex }
|
|
::= { downloadRemDwlPossibleTable 1 }
|
|
|
|
DownloadRemDwlPossibleEntry ::=
|
|
SEQUENCE
|
|
{
|
|
downloadRemDwlPossiblePortIndex INTEGER,
|
|
downloadRemDwlPossibleLinkIndex INTEGER,
|
|
downloadRemDwlPossibleNt INTEGER,
|
|
downloadRemDwlPossibleReg1Wp1 INTEGER,
|
|
downloadRemDwlPossibleReg2Wp1 INTEGER,
|
|
downloadRemDwlPossibleReg3Wp1 INTEGER,
|
|
downloadRemDwlPossibleReg4Wp1 INTEGER,
|
|
downloadRemDwlPossibleReg5Wp1 INTEGER,
|
|
downloadRemDwlPossibleReg6Wp1 INTEGER,
|
|
downloadRemDwlPossibleReg7Wp1 INTEGER,
|
|
downloadRemDwlPossibleReg8Wp1 INTEGER,
|
|
downloadRemDwlPossibleReg1Wp2 INTEGER,
|
|
downloadRemDwlPossibleReg2Wp2 INTEGER,
|
|
downloadRemDwlPossibleReg3Wp2 INTEGER,
|
|
downloadRemDwlPossibleReg4Wp2 INTEGER,
|
|
downloadRemDwlPossibleReg5Wp2 INTEGER,
|
|
downloadRemDwlPossibleReg6Wp2 INTEGER,
|
|
downloadRemDwlPossibleReg7Wp2 INTEGER,
|
|
downloadRemDwlPossibleReg8Wp2 INTEGER,
|
|
downloadRemDwlPossibleReg1Wp3 INTEGER,
|
|
downloadRemDwlPossibleReg2Wp3 INTEGER,
|
|
downloadRemDwlPossibleReg3Wp3 INTEGER,
|
|
downloadRemDwlPossibleReg4Wp3 INTEGER,
|
|
downloadRemDwlPossibleReg5Wp3 INTEGER,
|
|
downloadRemDwlPossibleReg6Wp3 INTEGER,
|
|
downloadRemDwlPossibleReg7Wp3 INTEGER,
|
|
downloadRemDwlPossibleReg8Wp3 INTEGER,
|
|
downloadRemDwlPossibleReg1Wp4 INTEGER,
|
|
downloadRemDwlPossibleReg2Wp4 INTEGER,
|
|
downloadRemDwlPossibleReg3Wp4 INTEGER,
|
|
downloadRemDwlPossibleReg4Wp4 INTEGER,
|
|
downloadRemDwlPossibleReg5Wp4 INTEGER,
|
|
downloadRemDwlPossibleReg6Wp4 INTEGER,
|
|
downloadRemDwlPossibleReg7Wp4 INTEGER,
|
|
downloadRemDwlPossibleReg8Wp4 INTEGER
|
|
}
|
|
|
|
downloadRemDwlPossiblePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { downloadRemDwlPossibleEntry 1 }
|
|
|
|
downloadRemDwlPossibleLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {downloadRemDwlPossibleEntry 2 }
|
|
|
|
downloadRemDwlPossibleNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 3 }
|
|
|
|
downloadRemDwlPossibleReg1Wp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 4 }
|
|
|
|
downloadRemDwlPossibleReg2Wp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 5 }
|
|
|
|
downloadRemDwlPossibleReg3Wp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 6 }
|
|
|
|
downloadRemDwlPossibleReg4Wp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 7 }
|
|
|
|
downloadRemDwlPossibleReg5Wp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 8 }
|
|
|
|
downloadRemDwlPossibleReg6Wp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 9 }
|
|
|
|
downloadRemDwlPossibleReg7Wp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 10 }
|
|
|
|
downloadRemDwlPossibleReg8Wp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 11 }
|
|
|
|
downloadRemDwlPossibleReg1Wp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 12 }
|
|
|
|
downloadRemDwlPossibleReg2Wp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 13 }
|
|
|
|
downloadRemDwlPossibleReg3Wp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 14 }
|
|
|
|
downloadRemDwlPossibleReg4Wp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 15 }
|
|
|
|
downloadRemDwlPossibleReg5Wp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 16 }
|
|
|
|
downloadRemDwlPossibleReg6Wp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 17 }
|
|
|
|
downloadRemDwlPossibleReg7Wp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 18 }
|
|
|
|
downloadRemDwlPossibleReg8Wp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 19 }
|
|
|
|
downloadRemDwlPossibleReg1Wp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 20 }
|
|
|
|
downloadRemDwlPossibleReg2Wp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 21 }
|
|
|
|
downloadRemDwlPossibleReg3Wp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 22 }
|
|
|
|
downloadRemDwlPossibleReg4Wp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 23 }
|
|
|
|
downloadRemDwlPossibleReg5Wp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 24 }
|
|
|
|
downloadRemDwlPossibleReg6Wp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 25 }
|
|
|
|
downloadRemDwlPossibleReg7Wp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 26 }
|
|
|
|
downloadRemDwlPossibleReg8Wp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 27 }
|
|
|
|
downloadRemDwlPossibleReg1Wp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 28 }
|
|
|
|
downloadRemDwlPossibleReg2Wp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 29 }
|
|
|
|
downloadRemDwlPossibleReg3Wp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 30 }
|
|
|
|
downloadRemDwlPossibleReg4Wp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 31 }
|
|
|
|
downloadRemDwlPossibleReg5Wp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 32 }
|
|
|
|
downloadRemDwlPossibleReg6Wp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 33 }
|
|
|
|
downloadRemDwlPossibleReg7Wp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 34 }
|
|
|
|
downloadRemDwlPossibleReg8Wp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a remote download is possible or not.
|
|
The value is bit-coded:
|
|
bit0 Active bank download possible (far NE compatible)
|
|
bit1 Active bank download not possible (far NE offline or not compatible)
|
|
bit2 Active bank unknown, no compatibility list available
|
|
bit3 not used
|
|
bit4 Passive bank download possible (far NE compatible)
|
|
bit5 Passive bank download not possible (far NE offline or not compatible)
|
|
bit6 Passive bank unknown, no compatibility list available
|
|
bit7 unsupported variable for addressed device"
|
|
::= { downloadRemDwlPossibleEntry 35 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Download Bank Swap Possible
|
|
--------------------------------------------------------------------------------
|
|
downloadSwapPossibleTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DownloadSwapPossibleEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { download 6 }
|
|
|
|
downloadSwapPossibleEntry OBJECT-TYPE
|
|
SYNTAX DownloadSwapPossibleEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { downloadSwapPossiblePortIndex, downloadSwapPossibleLinkIndex }
|
|
::= { downloadSwapPossibleTable 1 }
|
|
|
|
DownloadSwapPossibleEntry ::=
|
|
SEQUENCE
|
|
{
|
|
downloadSwapPossiblePortIndex INTEGER,
|
|
downloadSwapPossibleLinkIndex INTEGER,
|
|
downloadSwapPossibleLocal INTEGER,
|
|
downloadSwapPossibleNt INTEGER,
|
|
downloadSwapPossibleReg1Wp1 INTEGER,
|
|
downloadSwapPossibleReg2Wp1 INTEGER,
|
|
downloadSwapPossibleReg3Wp1 INTEGER,
|
|
downloadSwapPossibleReg4Wp1 INTEGER,
|
|
downloadSwapPossibleReg5Wp1 INTEGER,
|
|
downloadSwapPossibleReg6Wp1 INTEGER,
|
|
downloadSwapPossibleReg7Wp1 INTEGER,
|
|
downloadSwapPossibleReg8Wp1 INTEGER,
|
|
downloadSwapPossibleReg1Wp2 INTEGER,
|
|
downloadSwapPossibleReg2Wp2 INTEGER,
|
|
downloadSwapPossibleReg3Wp2 INTEGER,
|
|
downloadSwapPossibleReg4Wp2 INTEGER,
|
|
downloadSwapPossibleReg5Wp2 INTEGER,
|
|
downloadSwapPossibleReg6Wp2 INTEGER,
|
|
downloadSwapPossibleReg7Wp2 INTEGER,
|
|
downloadSwapPossibleReg8Wp2 INTEGER,
|
|
downloadSwapPossibleReg1Wp3 INTEGER,
|
|
downloadSwapPossibleReg2Wp3 INTEGER,
|
|
downloadSwapPossibleReg3Wp3 INTEGER,
|
|
downloadSwapPossibleReg4Wp3 INTEGER,
|
|
downloadSwapPossibleReg5Wp3 INTEGER,
|
|
downloadSwapPossibleReg6Wp3 INTEGER,
|
|
downloadSwapPossibleReg7Wp3 INTEGER,
|
|
downloadSwapPossibleReg8Wp3 INTEGER,
|
|
downloadSwapPossibleReg1Wp4 INTEGER,
|
|
downloadSwapPossibleReg2Wp4 INTEGER,
|
|
downloadSwapPossibleReg3Wp4 INTEGER,
|
|
downloadSwapPossibleReg4Wp4 INTEGER,
|
|
downloadSwapPossibleReg5Wp4 INTEGER,
|
|
downloadSwapPossibleReg6Wp4 INTEGER,
|
|
downloadSwapPossibleReg7Wp4 INTEGER,
|
|
downloadSwapPossibleReg8Wp4 INTEGER
|
|
}
|
|
|
|
downloadSwapPossiblePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { downloadSwapPossibleEntry 1 }
|
|
|
|
downloadSwapPossibleLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {downloadSwapPossibleEntry 2 }
|
|
|
|
downloadSwapPossibleLocal OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 3 }
|
|
|
|
downloadSwapPossibleNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 4 }
|
|
|
|
downloadSwapPossibleReg1Wp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 5 }
|
|
|
|
downloadSwapPossibleReg2Wp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 6 }
|
|
|
|
downloadSwapPossibleReg3Wp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 7 }
|
|
|
|
downloadSwapPossibleReg4Wp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 8 }
|
|
|
|
downloadSwapPossibleReg5Wp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 9 }
|
|
|
|
downloadSwapPossibleReg6Wp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 10 }
|
|
|
|
downloadSwapPossibleReg7Wp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 11 }
|
|
|
|
downloadSwapPossibleReg8Wp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 12 }
|
|
|
|
downloadSwapPossibleReg1Wp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 13 }
|
|
|
|
downloadSwapPossibleReg2Wp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 14 }
|
|
|
|
downloadSwapPossibleReg3Wp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 15 }
|
|
|
|
downloadSwapPossibleReg4Wp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 16 }
|
|
|
|
downloadSwapPossibleReg5Wp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 17 }
|
|
|
|
downloadSwapPossibleReg6Wp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 18 }
|
|
|
|
downloadSwapPossibleReg7Wp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 19 }
|
|
|
|
downloadSwapPossibleReg8Wp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 20 }
|
|
|
|
downloadSwapPossibleReg1Wp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 21 }
|
|
|
|
downloadSwapPossibleReg2Wp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 22 }
|
|
|
|
downloadSwapPossibleReg3Wp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 23 }
|
|
|
|
downloadSwapPossibleReg4Wp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 24 }
|
|
|
|
downloadSwapPossibleReg5Wp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 25 }
|
|
|
|
downloadSwapPossibleReg6Wp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 26 }
|
|
|
|
downloadSwapPossibleReg7Wp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 27 }
|
|
|
|
downloadSwapPossibleReg8Wp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 28 }
|
|
|
|
downloadSwapPossibleReg1Wp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 29 }
|
|
|
|
downloadSwapPossibleReg2Wp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 30 }
|
|
|
|
downloadSwapPossibleReg3Wp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 31 }
|
|
|
|
downloadSwapPossibleReg4Wp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 32 }
|
|
|
|
downloadSwapPossibleReg5Wp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 33 }
|
|
|
|
downloadSwapPossibleReg6Wp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 34 }
|
|
|
|
downloadSwapPossibleReg7Wp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 35 }
|
|
|
|
downloadSwapPossibleReg8Wp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
swapNotPossible(1),
|
|
swapPossible(2),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether a firmware bank swap is possible or not.
|
|
1 SwapNotPossible Bank swap is not possible
|
|
2 SwapPossible Bank swap is possible
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { downloadSwapPossibleEntry 36 }
|
|
|
|
--==============================================================================
|
|
--==============================================================================
|
|
--
|
|
-- Traps
|
|
--
|
|
--==============================================================================
|
|
--==============================================================================
|
|
extendedTraps OBJECT IDENTIFIER ::= { linksVers3 8 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Extended Traps
|
|
--------------------------------------------------------------------------------
|
|
extendedTrapsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ExtendedTrapsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { extendedTraps 1 }
|
|
|
|
extendedTrapsEntry OBJECT-TYPE
|
|
SYNTAX ExtendedTrapsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { extendedTrapsPortIndex, extendedTrapsLinkIndex }
|
|
::= { extendedTrapsTable 1 }
|
|
|
|
ExtendedTrapsEntry ::=
|
|
SEQUENCE
|
|
{
|
|
extendedTrapsPortIndex INTEGER,
|
|
extendedTrapsLinkIndex INTEGER,
|
|
extendedTrapsType INTEGER
|
|
}
|
|
|
|
extendedTrapsPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { extendedTrapsEntry 1 }
|
|
|
|
extendedTrapsLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {extendedTrapsEntry 2 }
|
|
|
|
extendedTrapsType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lineConfigChange(1),
|
|
alarmConfigChange(2),
|
|
rdwlState(3),
|
|
rebootRemote(4),
|
|
ldwlState(5),
|
|
lineProbing(6),
|
|
userDataChange(7),
|
|
ledStateChange(8),
|
|
systemConfigChange(9),
|
|
teDataAvailable(10),
|
|
teSessionEnd(11),
|
|
tePwrStationAlCfg(12),
|
|
pwdLost(13),
|
|
link(14),
|
|
authentication(15),
|
|
multipleUsers(16),
|
|
stp(17),
|
|
acl(18),
|
|
cfgChangeL2Switch(19),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is only used as an attachement on the extended snmp trap
|
|
1 LineConfigChange The line configuration has changed
|
|
2 AlarmConfigChange The alarm configuration has changed
|
|
3 RDWLState The state of the remote download has changed
|
|
4 RebootRemote The remote device has rebooted
|
|
5 LDWLState The state of the local download has changed
|
|
6 LineProbing The lineprobing is terminated
|
|
7 UserDataChange The user data string has changed
|
|
8 LEDStateChange The LED state has changed
|
|
9 SystemConfigChange The number of wire pairs has changed
|
|
10 TEDataAvailable Terminal emulation offers data for terminal output
|
|
11 TESessionEnd End of terminal session on line card (not OMII)
|
|
12 TEPwrStationAlCfg Change of Power Station Alarms (to OMII)
|
|
13 PwdLost Password lost
|
|
14 Link FE or GbE link status changed
|
|
15 Authentication Authentication status changed
|
|
16 MultipleUsers Multiple users status changed
|
|
17 STP Spanning Tree Protocol status changed
|
|
18 ACL Access Control Lists status changed
|
|
19 CfgChangeL2Switch L2 Switch configuration data changed
|
|
254 unknown value
|
|
255 unsupported variable for addressed device"
|
|
::= { extendedTrapsEntry 3 }
|
|
|
|
--==============================================================================
|
|
--==============================================================================
|
|
--
|
|
-- SM RW
|
|
--
|
|
--==============================================================================
|
|
--==============================================================================
|
|
smrw OBJECT IDENTIFIER ::= { linksVers3 9 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- SM RW SM Read & Write
|
|
--------------------------------------------------------------------------------
|
|
smrwOmiTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SmrwOmiEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= {smrw 1 }
|
|
|
|
smrwOmiEntry OBJECT-TYPE
|
|
SYNTAX SmrwOmiEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { smrwOmiPortIndex }
|
|
::= { smrwOmiTable 1 }
|
|
|
|
SmrwOmiEntry ::=
|
|
SEQUENCE
|
|
{
|
|
smrwOmiPortIndex INTEGER,
|
|
smrwOmiLCTLocalMgmt INTEGER,
|
|
smrwOmiLCTRemoteMgmt INTEGER,
|
|
smrwOmiSNMPv1-v2Mgmt INTEGER,
|
|
smrwOmiSNMPv3Mgmt INTEGER,
|
|
smrwOmiCLIMgmt INTEGER,
|
|
smrwOmiWebMgmt INTEGER
|
|
}
|
|
|
|
smrwOmiPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used as index for the other elements in the Table"
|
|
::= { smrwOmiEntry 1 }
|
|
|
|
smrwOmiLCTLocalMgmt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAccess(1),
|
|
roAccess(2),
|
|
rwAccess(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a read-only variable which is used to get
|
|
LCT local management status:
|
|
1 NO_ACCESS
|
|
2 RO_ACCESS
|
|
3 RW_ACCESS
|
|
254 unknown value
|
|
255 unsupported value"
|
|
::= { smrwOmiEntry 2 }
|
|
|
|
smrwOmiLCTRemoteMgmt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAccess(1),
|
|
roAccess(2),
|
|
rwAccess(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a read-write variable which is used to get/set
|
|
LCT remote management status:
|
|
1 NO_ACCESS
|
|
2 RO_ACCESS
|
|
3 RW_ACCESS
|
|
254 unknown value
|
|
255 unsupported value"
|
|
::= { smrwOmiEntry 3 }
|
|
|
|
smrwOmiSNMPv1-v2Mgmt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAccess(1),
|
|
roAccess(2),
|
|
rwAccess(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a read-write variable which is used to get/set
|
|
SNMPv1 and SNMPv2 management status:
|
|
1 NO_ACCESS
|
|
2 RO_ACCESS
|
|
3 RW_ACCESS
|
|
254 unknown value
|
|
255 unsupported value"
|
|
::= { smrwOmiEntry 4 }
|
|
|
|
smrwOmiSNMPv3Mgmt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAccess(1),
|
|
roAccess(2),
|
|
rwAccess(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a read-write variable which is used to get/set
|
|
SNMPv3 management status:
|
|
1 NO_ACCESS
|
|
2 RO_ACCESS
|
|
3 RW_ACCESS
|
|
254 unknown value
|
|
255 unsupported value"
|
|
::= { smrwOmiEntry 5 }
|
|
|
|
smrwOmiCLIMgmt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAccess(1),
|
|
roAccess(2),
|
|
rwAccess(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a read-write variable which is used to get/set
|
|
CLI management status:
|
|
1 NO_ACCESS
|
|
2 RO_ACCESS
|
|
3 RW_ACCESS
|
|
254 unknown value
|
|
255 unsupported value"
|
|
::= { smrwOmiEntry 6 }
|
|
|
|
smrwOmiWebMgmt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAccess(1),
|
|
roAccess(2),
|
|
rwAccess(3),
|
|
unknown(254),
|
|
unsupported(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a read-only variable which is used to get
|
|
Web management status:
|
|
1 NO_ACCESS
|
|
2 RO_ACCESS
|
|
3 RW_ACCESS
|
|
254 unknown value
|
|
255 unsupported value"
|
|
::= { smrwOmiEntry 7 }
|
|
|
|
--==============================================================================
|
|
--==============================================================================
|
|
--
|
|
-- OMPP over SNMP
|
|
--
|
|
--==============================================================================
|
|
--==============================================================================
|
|
omppOverSNMP OBJECT IDENTIFIER ::= { linksVers3 10 }
|
|
|
|
omppOverSNMPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OmppOverSNMPEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { omppOverSNMP 1 }
|
|
|
|
omppOverSNMPEntry OBJECT-TYPE
|
|
SYNTAX OmppOverSNMPEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX { omppOverSNMPPortIndex, omppOverSNMPLinkIndex, IMPLIED omppOverSNMPInvokeInfo }
|
|
::= { omppOverSNMPTable 1 }
|
|
|
|
OmppOverSNMPEntry ::=
|
|
SEQUENCE
|
|
{
|
|
omppOverSNMPPortIndex INTEGER,
|
|
omppOverSNMPLinkIndex INTEGER,
|
|
omppOverSNMPInvokeInfo OCTET STRING,
|
|
omppOverSNMPGetData OCTET STRING,
|
|
omppOverSNMPSetData OCTET STRING
|
|
}
|
|
|
|
omppOverSNMPPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "This variable addresses the port number of the proxy
|
|
and is used as index for the other elements in the Table"
|
|
::= { omppOverSNMPEntry 1 }
|
|
|
|
omppOverSNMPLinkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "This variable addresses the slot number of the OMI sub-rack
|
|
and is used as index for the other elements in the Table"
|
|
::= {omppOverSNMPEntry 2 }
|
|
|
|
omppOverSNMPInvokeInfo OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "OMPP Invoke Telegram Data (only L7)"
|
|
::= { omppOverSNMPEntry 3 }
|
|
|
|
omppOverSNMPGetData OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Confirm Telegram Data (Get,read)"
|
|
::= { omppOverSNMPEntry 4 }
|
|
|
|
omppOverSNMPSetData OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Additional OMPP Invoke Telegram Data (Set, write)"
|
|
::= { omppOverSNMPEntry 5 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
END
|