clones/librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-09-21 10:28:13 +00:00
Code Issues Packages Projects Releases Wiki Activity
master
librenms/mibs/ipinfusion/IPI-CMM-CHASSIS-MIB
Tony Murray 05f06bafc1
OcNOS: add health sensors (#15910) 
* OcNOS: add health sensors
Add Health Sensors
Update MIBs
Break out current sensors due to missing thresholds on _IIN sensors

* Add test data

* Wrong processors data
2024-03-27 12:23:44 -05:00

8850 lines
323 KiB
Plaintext
Raw Permalink Blame History

IPI-CMM-CHASSIS-MIB DEFINITIONS ::= BEGIN
-- This module provides authoritative definitions for cmm modules
--
-- This module will be extended, as needed.
--
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY,
Gauge32, Counter32, Unsigned32,
TimeTicks, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DateAndTime, DisplayString,
MacAddress, RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
enterprises,OBJECT-IDENTITY
FROM SNMPv2-SMI
ipi FROM IPI-MODULE-MIB;
cmm MODULE-IDENTITY
LAST-UPDATED "202005060000Z" -- Jun 05, 2020 12:00:00 GMT
ORGANIZATION "IP Infusion"
CONTACT-INFO "support@ipinfusion.com"
DESCRIPTION
"The Structure of CMM Management Information for
the IPI enterprise."
REVISION "202005060000Z"
DESCRIPTION
"Complying to level 3 of SMILINT"
::= { ipi 100 }
-- ### Groups ###
cmmChassisObject OBJECT IDENTIFIER ::={ cmm 1 }
cmmObjects OBJECT IDENTIFIER ::={ cmmChassisObject 1 }
cmmSysObjects OBJECT IDENTIFIER ::={ cmmChassisObject 2 }
cmmAlarmObjects OBJECT IDENTIFIER ::={ cmmChassisObject 3 }
-- ### Textual Convention
LedColorCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The color code value for led's in the unit."
SYNTAX INTEGER {
none(1),
green(2),
blinking-green(3),
solid-green(4),
amber(5),
blinking-amber(6),
solid-amber(7),
red(8),
blinking-red(9),
solid-red(10),
blue(11),
blinking-blue(12),
yellow(13),
blinking-yellow(14),
orange(15),
slow-blinking-green(16),
fast-blinking-green(17),
unknown(30),
unavailable(-100001),
not-applicable(-100002)
}
SystemStatusCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The components for system status in the unit.
Value '0' means there is no fault in the system."
SYNTAX BITS {
cpu(0),
ram(1),
disk(2),
low-temperature(3),
high-temperature(4),
fan(5),
power(6),
software(7)
}
ErrorFigures ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Frame Error Rate (FER)/Uncorrecter BER. This parameter measures the
uncorrected/errored RS(544,514) equivalent frames per second. This
is an uncorrected rate; i.e. the bit error rate of frames that
cannot be corrected by the FEC.
Pre-FEC Bit Error Ratio (BER). This is the total number of errored
bits that were corrected by the FEC during an interval divided by
the total number of bits received in the interval.
Post-FEC Bit Error Ratio (BER). This is the total number of errored
bits that were corrected by the FEC during an interval divided by
the total number of bits received in the interval.
Example: a mantissa value of 2.7 and an exponent value of -34
indicates 2.7e-34"
SYNTAX OCTET STRING
-- ### Chassis Information
cmmNumStackUnits OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of stack units configured
on the chassis."
::= { cmmObjects 1 }
-- ### Chassis System ###
-- ## StackUnit Table
-- The Cmm chassis is a single virtual system to
-- have the stackable units as virtual slots.
-- In the chassis, there can be multiple physical units
-- stacked together.
-- The StackUnit table contains the management information
-- of each stacked unit in the chassis.
cmmStackUnitTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmStackUnitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries containing information
for each stacked unit."
::= { cmmSysObjects 1 }
cmmStackUnitEntry OBJECT-TYPE
SYNTAX CmmStackUnitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries containing information
for each stacked unit."
INDEX { cmmStackUnitIndex }
::= { cmmStackUnitTable 1 }
CmmStackUnitEntry ::=
SEQUENCE {
cmmStackUnitIndex INTEGER,
cmmStackUnitModelName DisplayString,
cmmStackUnitSerialNumber DisplayString,
cmmStackUnitUpTime TimeTicks,
cmmStackUnitMfgDate DateAndTime,
cmmStackUnitMacAddress MacAddress,
cmmStackUnitPartNum DisplayString,
cmmStackLabelRevision DisplayString,
cmmStackUnitCountryCode OCTET STRING,
cmmStackUnitServiceTag DisplayString,
cmmStackPlatformName DisplayString,
cmmStackOnieVersion DisplayString,
cmmStackMfgName DisplayString,
cmmStackVendorName DisplayString,
cmmStackDiagVersion DisplayString,
cmmStackCrc32 OCTET STRING,
cmmStackUnitNumFanControllers INTEGER,
cmmStackUnitNumFanTrays INTEGER,
cmmStackUnitNumPowerSupplies INTEGER,
cmmStackUnitNumPluggableModules INTEGER,
cmmStackUnitNumFastEtherPorts INTEGER,
cmmStackUnitNumGigEtherPorts INTEGER,
cmmStackUnitNum10GigEtherPorts INTEGER,
cmmStackUnitNum25GigEtherPorts INTEGER,
cmmStackUnitNum40GigEtherPorts INTEGER,
cmmStackUnitNum50GigEtherPorts INTEGER,
cmmStackUnitNum100GigEtherPorts INTEGER,
cmmStackUnitSwitchChipRev DisplayString,
cmmStackSupportedLabelRevision DisplayString,
cmmStackUnitSupportedSwitchChipRev DisplayString
}
cmmStackUnitIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The unique stack unit number."
::= { cmmStackUnitEntry 1 }
cmmStackUnitModelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The plugged-in model name for this unit.
Blank indicates unavailable"
::= { cmmStackUnitEntry 2 }
cmmStackUnitSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's serial number.
Blank indicates unavailable"
::= { cmmStackUnitEntry 3 }
cmmStackUnitUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system up time of the unit."
::= { cmmStackUnitEntry 4 }
cmmStackUnitMfgDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date the unit is manufactured.
Blank indicates unavailable"
::= { cmmStackUnitEntry 5 }
cmmStackUnitMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet MAC Address assigned to this unit."
::= { cmmStackUnitEntry 6 }
cmmStackUnitPartNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit part number.
Blank indicates unavailable"
::= { cmmStackUnitEntry 7 }
cmmStackLabelRevision OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's label Revision.
Blank indicates unavailable"
::= { cmmStackUnitEntry 8 }
cmmStackUnitCountryCode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit manufacturer's country code."
::= { cmmStackUnitEntry 9 }
cmmStackUnitServiceTag OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's service tag.
Blank indicates unavailable"
::= { cmmStackUnitEntry 10 }
cmmStackPlatformName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Platform Name for the Unit.
Blank indicates unavailable"
::= { cmmStackUnitEntry 11 }
cmmStackOnieVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's ONIE Version.
Blank indicates unavailable"
::= { cmmStackUnitEntry 12 }
cmmStackMfgName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's Manufacturer Name.
Blank indicates unavailable"
::= { cmmStackUnitEntry 13 }
cmmStackVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's Vendor Name.
Blank indicates unavailable"
::= { cmmStackUnitEntry 14 }
cmmStackDiagVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's Diagnostic Version.
Blank indicates unavailable"
::= { cmmStackUnitEntry 15 }
cmmStackCrc32 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's Cyclic Redundancy Check 32 Bit value in hex."
::= { cmmStackUnitEntry 16 }
cmmStackUnitNumFanControllers OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of fan controllers on the unit.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 17 }
cmmStackUnitNumFanTrays OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of fan trays on the unit.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 18 }
cmmStackUnitNumPowerSupplies OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of power supplies available to the unit.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 19 }
cmmStackUnitNumPluggableModules OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of pluggable modules in the stack.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 20 }
cmmStackUnitNumFastEtherPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 100M Ethernet/802.3 interfaces in this unit.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 21 }
cmmStackUnitNumGigEtherPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 1G Ethernet/802.3 interfaces in this unit.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 22 }
cmmStackUnitNum10GigEtherPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 10G Ethernet/802.3 interfaces in this unit.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 23 }
cmmStackUnitNum25GigEtherPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 25G Ethernet/802.3 interfaces in this unit.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 24 }
cmmStackUnitNum40GigEtherPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 40G Ethernet/802.3 interfaces in this unit.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 25 }
cmmStackUnitNum50GigEtherPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 50G Ethernet/802.3 interfaces
in this unit. '-100001' indicates unavailable"
::= { cmmStackUnitEntry 26 }
cmmStackUnitNum100GigEtherPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 100G Ethernet/802.3 interfaces
in this unit. '-100001' indicates unavailable"
::= { cmmStackUnitEntry 27 }
cmmStackUnitSwitchChipRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Unit's Switch Chip Revision."
::= { cmmStackUnitEntry 28 }
cmmStackSupportedLabelRevision OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's supported label Revision.
Blank indicates unavailable"
::= { cmmStackUnitEntry 29 }
cmmStackUnitSupportedSwitchChipRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Unit's Switch Supported Chip Revision."
::= { cmmStackUnitEntry 30 }
-- ## Transceiver EEPROM Entry
cmmTransEEPROMTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmTransEEPROMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Transceiver entry containing eeprom related objects for a particular port."
::= { cmmSysObjects 2 }
cmmTransEEPROMEntry OBJECT-TYPE
SYNTAX CmmTransEEPROMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Transceiver entry containing eeprom related objects for a particular port."
INDEX { cmmStackUnitIndex,
cmmTransIndex }
::= { cmmTransEEPROMTable 1 }
CmmTransEEPROMEntry::=
SEQUENCE {
cmmTransIndex INTEGER,
cmmTransType INTEGER,
cmmTransNoOfChannels INTEGER,
cmmTransidentifier INTEGER,
cmmTransSFPextendedidentifier INTEGER,
cmmTransQSFPextendedidentifier BITS,
cmmTransconnectortype INTEGER,
cmmTransEthCompliance INTEGER,
cmmTransExtEthCompliance INTEGER,
cmmTransSonetCompliance BITS,
cmmTransFiberChnlLinkLen BITS,
cmmTransFiberChnlTransTech BITS,
cmmTransFiberChnlTransMedia BITS,
cmmTransSFPFiberChnlSpeed BITS,
cmmTransQSFPFiberChnlSpeed BITS,
cmmTransSFPInfiniBandCompliance INTEGER,
cmmTransSFPEsconCompliance INTEGER,
cmmTransSfpPlusCableTech INTEGER,
cmmTransEncoding INTEGER,
cmmTransLengthKmtrs INTEGER,
cmmTransLengthMtrs INTEGER,
cmmTransLengthOM1 INTEGER,
cmmTransLengthOM2 INTEGER,
cmmTransLengthOM3 INTEGER,
cmmTransLengthOM4 INTEGER,
cmmTransVendorName DisplayString,
cmmTransVendorOUI DisplayString,
cmmTransVendorPartNumber DisplayString,
cmmTransVendorRevision DisplayString,
cmmTransCheckCode OCTET STRING,
cmmTransCheckCodeExtended OCTET STRING,
cmmTransNominalBitRate INTEGER,
cmmTransBitRateMax INTEGER,
cmmTransBitRateMin INTEGER,
cmmTransVendorSerialNumber DisplayString,
cmmTransDateCode DisplayString,
cmmTransDDMSupport INTEGER,
cmmTransMaxCaseTemp INTEGER,
cmmTransSFPOptionsImp BITS,
cmmTransQSFPOptionsImp BITS,
cmmTransPresence INTEGER,
cmmTransFrontPanelPortNumber INTEGER,
cmmTransXFPextendedidentifier BITS,
cmmTransXFP10GEthCompliance BITS,
cmmTransXFP10GFiberChnCompliance BITS,
cmmTransXFP10GCopperLinksRsvd BITS,
cmmTransXFPLowerSpeedLinks BITS,
cmmTransXFPSonetInterconnect BITS,
cmmTransXFPSonetShortHaul BITS,
cmmTransXFPSonetLongHaul BITS,
cmmTransXFPSonetVeryLongHaul BITS,
cmmTransXFPOptionsImp BITS,
cmmTransXFPVoltageAuxMonitor BITS,
cmmTransXFPEncoding BITS,
cmmTransWavelength INTEGER,
cmmTransChannelNumber INTEGER,
cmmTransGridSpacing INTEGER,
cmmTransLaserFirstFrequency INTEGER,
cmmTransLaserLastFrequency INTEGER
}
cmmTransIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
" A unique value, greater than zero,for each slot within the unit"
::= { cmmTransEEPROMEntry 1 }
cmmTransType OBJECT-TYPE
SYNTAX INTEGER {
sfp(1),
qsfp(2),
xfp(3),
pon-xfp(4),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver type"
::= { cmmTransEEPROMEntry 2 }
cmmTransNoOfChannels OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of channels available for this transceiver.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 3 }
cmmTransidentifier OBJECT-TYPE
SYNTAX INTEGER {
id-unknown(1),
gbic(2),
soldered-to-motherboard(3),
sfp-or-sfpplus-or-sfp28(4),
xbi-300pin(5),
xenpak(6),
xfp(7),
xff(8),
xfpe(9),
xpak(10),
x2(11),
dwdmsfp-or-dwdmsfpplus(12),
qsfp(13),
qsfpplus-or-later(14),
cxp-or-later(15),
shielded-mini-multilane-hd4x(16),
shielded-mini-multilane-hd8x(17),
qsfp28-or-later(18),
cxp2-aka-cxp28-or-later(19),
cdfpstyle1-or-cdfpstyle2(20),
shielded-mini-multilane-hd4x-fanoutcable(21),
shielded-mini-multilane-hd8x-fanoutcable(22),
cdfpstyle3(23),
microqsfp(24),
qsfp-doubledensity-8x-pluggable-transceiver(25),
reserved(26),
vendor-specific(27),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Type of transceiver present eg:SFP/SFP+/SFP28/QSFP/QSFP+/QSFP28."
::= { cmmTransEEPROMEntry 4 }
cmmTransSFPextendedidentifier OBJECT-TYPE
SYNTAX INTEGER {
gbic-notspecified-or-compliant-with-moddef(1),
gbic-compliant-with-moddef1(2),
gbic-compliant-with-moddef2(3),
gbic-compliant-with-moddef3(4),
gbic-or-sfp-definedby-twowire-interfaceid-only (5),
gbic-compliant-with-moddef5(6),
gbic-compliant-with-moddef6(7),
gbic-compliant-with-moddef7(8),
unallocated(9),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Extended identifier of SFP transceiver for additional information."
::= { cmmTransEEPROMEntry 5 }
cmmTransQSFPextendedidentifier OBJECT-TYPE
SYNTAX BITS {
powerclass1-1dot5wmax(0),
powerclass2-2wmax(1),
powerclass3-2dot5wmax(2),
powerclass4-3dot5wmax(3),
cleicode-present(4),
cdrpresent-in-tx(5),
cdrpresent-in-rx(6),
powerclass5-4wmax(7),
powerclass6-4dot5wmax(8),
powerclass7-5wmax(9),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Extended identifier of QSFP transceiver for additional information."
::= { cmmTransEEPROMEntry 6 }
cmmTransconnectortype OBJECT-TYPE
SYNTAX INTEGER {
type-unknown(1),
subscriber-connector(2),
fibrechannel-style1-copperconnector(3),
fibrechannel-style2-copperconnector(4),
bayonet-or-threaded-neill-concelman(5),
fibrechannel-coaxheaders(6),
fiber-jack(7),
lucent-connector(8),
mechanical-transfer-registeredjack(9),
multiple-optical(10),
sg(11),
optical-pigtail(12),
multifiber-paralleloptic-1x12(13),
multifiber-paralleloptic-1x16(14),
hssdcii(15),
copper-pigtail(16),
rj45(17),
no-separable-connector(18),
mxc2-x16(19),
reserved(20),
vendor-specific(21),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Connector type for the transceiver."
::= { cmmTransEEPROMEntry 7 }
cmmTransEthCompliance OBJECT-TYPE
SYNTAX INTEGER {
ec-unknown(1),
ec-10gbase-sr(2),
ec-10gbase-lr(3),
ec-10gbase-lrm(4),
ec-10gbase-er(5),
ec-1000base-sx(6),
ec-1000base-lx(7),
ec-1000base-cx(8),
ec-1000base-t(9),
ec-100base-lx-or-lx10(10),
ec-100base-fx(11),
ec-base-bx10(12),
ec-base-px(13),
ec-40gbase-cr4(14),
ec-40gbase-sr4(15),
ec-40gbase-lr4(16),
ec-40g-activecable(17),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Values of Ethernet Compliance codes."
::= { cmmTransEEPROMEntry 8 }
cmmTransExtEthCompliance OBJECT-TYPE
SYNTAX INTEGER {
eec-unspecified(0),
eec-100g-activeopticalcable-or-25g-auic2maoc(1),
eec-100gbase-sr4-or-25gbase-sr(2),
eec-100gbase-lr4-or-25gbase-lr(3),
eec-100gbase-er4-or-25gbase-er(4),
eec-100gbase-sr10(5),
eec-100g-cwdm4(6),
eec-100g-psm4-parallelsmf(7),
eec-100g-activecoppercable-or-25g-auic2macc(8),
eec-obsolete(9),
eec-reserved(10),
eec-100gbase-cr4-or-25gbase-crca-l(11),
eec-25gbase-crca-s(12),
eec-25gbase-crca-n(13),
eec-10mb-single-pair-eth(14),
eec-40gbase-er4(16),
eec-4x10gbase-sr(17),
eec-40g-psm4-parallelsmf(18),
eec-g959-dot1-profilep1-i1-2d1(19),
eec-g959-dot1-profilep1-s1-2d2(20),
eec-g959-dot1-profilep1-l1-2d2(21),
eec-10gbase-t-with-sfi-electricalinterface(22),
eec-100g-clr4(23),
eec-100g-aoc-or-25g-auic2maoc(24),
eec-100g-acc-or-25g-auic2macc(25),
eec-100ge-dwdm2(26),
eec-100g-1550nm-wdm(27),
eec-10gbaset-short-reach(28),
eec-5gbaset(29),
eec-2point5gbaset(30),
eec-40g-swdm4(31),
eec-100g-swdm4(32),
eec-100g-pam4-bidi(33),
eec-100g-4wdm-10msa(34),
eec-100g-4wdm-20msa(35),
eec-100g-4wdm-40msa(36),
eec-100gbase-dr-clause140(37),
eec-100g-fr-or-fr1-clause140(38),
eec-100g-lr-or-lr1-clause140(39),
eec-100gbase-sr1-p802-clause167(40),
eec-100gbase-sr1-200gbase-sr2-400gbase-sr4-clause167(41),
eec-100gbase-fr1-clause140(42),
eec-100gbase-lr1-clause140(43),
eec-100g-lr1-20msa-and-caui4(44),
eec-100g-er1-30msa-and-caui4(45),
eec-100g-er1-40msa-and-caui4(46),
eec-100g-lr1-20msa(47),
eec-acc-with-50gaui-100gaui2-200gaui4-c2m-worst-ber-10minus6(48),
eec-aoc-with-50gaui-100gaui2-200gaui4-c2m-worst-ber-10minus6(49),
eec-acc-with-50gaui-100gaui2-200gaui4-c2m-worst-ber-10minus5(50),
eec-aoc-with-50gaui-100gaui2-200gaui4-c2m-worst-ber-10-minus5(51),
eec-100g-er1-30msa(52),
eec-100g-er1-40msa(53),
eec-100gbase-vr1-200gbase-vr2-400gbase-sr4-clause167(54),
eec-10gbase-br(55),
eec-25gbase-br(56),
eec-50gbase-br(57),
eec-100gbase-vr1-p802-clause167(58),
-- //3b-3e reserved
eec-100gbase-cr1-200gbase-cr2-400gbase-cr4-clause162(63),
eec-50gbase-cr-100gbase-cr2-200gbase-cr4(64),
eec-50gbase-sr-100gbase-sr2-200gbase-sr4(65),
eec-50gbase-fr-200gbase-dr4(66),
eec-200gbase-fr4(67),
eec-200g-1550nm-psm4(68),
eec-50gbase-lr(69),
eec-200gbase-lr4(70),
eec-400gbase-dr4-clause124(71),
eec-400gbase-fr4-clause151(72),
eec-400gbase-fr46-clause151(73),
eec-50gbase-er-clause139(74),
eec-400g-lr410(75),
eec-400gbase-zr-clause156(76),
-- //4D-7E reserved
eec-256gfc-sw4(127),
eec-64gfc(128),
eec-128gfc(129),
-- //82-ff reserved
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bitmap of Extended Ethernet Compliance codes."
::= { cmmTransEEPROMEntry 9 }
cmmTransSonetCompliance OBJECT-TYPE
SYNTAX BITS {
oc192-shortreach(0),
sonet-reachspecifier-bit1(1),
sonet-reachspecifier-bit2(2),
oc48-longreach(3),
oc48-intermediatereach(4),
oc48-shortreach(5),
oc12-singlemode-longreach(6),
oc12-singlemode-intermediatereach(7),
oc12-singlemode-shortreach(8),
oc3-singlemode-longreach(9),
oc3-singlemode-intermediatereach(10),
oc3-singlemode-shortreach(11),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sonet Compliance codes of transceiver."
::= { cmmTransEEPROMEntry 10 }
cmmTransFiberChnlLinkLen OBJECT-TYPE
SYNTAX BITS {
short(0),
medium(1),
intermediate(2),
long(3),
verylong(4),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fiber Channel Link Length."
::= { cmmTransEEPROMEntry 11 }
cmmTransFiberChnlTransTech OBJECT-TYPE
SYNTAX BITS {
shortwaveLaserLinearRx(0),
longwaveLaserLC(1),
electricalInter-Enclosure(2),
electricalIntra-Enclosure(3),
shortwaveLaserWithOutOFC(4),
shortwaveLaserwithOFC(5),
longwaveLaserLL(6),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fiber Channel Transmitter Technology."
::= { cmmTransEEPROMEntry 12 }
cmmTransFiberChnlTransMedia OBJECT-TYPE
SYNTAX BITS {
twinaxial-pair(0),
twisted-pair(1),
miniature-coax(2),
video-coax(3),
multi-mode62dot5m(4),
multi-mode50m(5),
multi-mode50um(6),
single-mode(7),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fiber Channel Transmitter Media."
::= { cmmTransEEPROMEntry 13 }
cmmTransSFPFiberChnlSpeed OBJECT-TYPE
SYNTAX BITS {
fcs-3200mbps(0),
fcs-1600mbps(1),
fcs-1200mbps(2),
fcs-800mbps(3),
fcs-400mbps(4),
fcs-200mbps(5),
fcs-100mbps(6),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP Fiber Channel Speed."
::= { cmmTransEEPROMEntry 14 }
cmmTransQSFPFiberChnlSpeed OBJECT-TYPE
SYNTAX BITS {
fcs-3200mbps(0),
fcs-1600mbps(1),
fcs-1200mbps(2),
fcs-800mbps(3),
fcs-400mbps(4),
fcs-200mbps(5),
fcs-100mbps(6),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"QSFP Fiber Channel Speed."
::= { cmmTransEEPROMEntry 15 }
cmmTransSFPInfiniBandCompliance OBJECT-TYPE
SYNTAX INTEGER {
ibc-1xsx(1),
ibc-1xlx(2),
ibc-1xcopperactive(3),
ibc-1xcopperpassive(4),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP InfiniBand Compliance."
::= { cmmTransEEPROMEntry 16 }
cmmTransSFPEsconCompliance OBJECT-TYPE
SYNTAX INTEGER {
escon-mmf-1310nm-led(1),
escon-smf-1310nm-laser(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP Enterprise Systems Connection compliance."
::= { cmmTransEEPROMEntry 17 }
cmmTransSfpPlusCableTech OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP+ Cable Technology."
::= { cmmTransEEPROMEntry 18 }
cmmTransEncoding OBJECT-TYPE
SYNTAX INTEGER {
enc-unspecified(1),
enc-8b-or-10b(2),
enc-4b-or-5b(3),
enc-nrz(4),
enc-manchester(5),
enc-sonet-scrambled(6),
enc-64b-or-66b(7),
enc-256b-or-257b(8),
enc-pam4(9),
enc-reserved(10),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Code for SFP/QSFP high speed serial encoding algorithm."
::= { cmmTransEEPROMEntry 19 }
cmmTransLengthKmtrs OBJECT-TYPE
SYNTAX INTEGER
UNITS "km"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link length supported for single mode fiber, units of km.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 20 }
cmmTransLengthMtrs OBJECT-TYPE
SYNTAX INTEGER
UNITS "100 m"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link length supported for single mode fiber, units of 100 m.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 21 }
cmmTransLengthOM1 OBJECT-TYPE
SYNTAX INTEGER
UNITS "10 m"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link length supported for 62.5 um OM1 fiber, units of 10 m.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 22 }
cmmTransLengthOM2 OBJECT-TYPE
SYNTAX INTEGER
UNITS "10 m"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link length supported for 50 um OM2 fiber, units of 10 m.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 23 }
cmmTransLengthOM3 OBJECT-TYPE
SYNTAX INTEGER
UNITS "10 m"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link length supported for 50 um OM3 fiber, units of 10 m.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 24 }
cmmTransLengthOM4 OBJECT-TYPE
SYNTAX INTEGER
UNITS "10 m"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link length supported for 50 um OM4 fiber, units of 10 m.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 25 }
cmmTransVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver vendor name.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 26 }
cmmTransVendorOUI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver vendor IEEE company ID.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 27 }
cmmTransVendorPartNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Part number provided by tarnsceiver vendor.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 28 }
cmmTransVendorRevision OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Revision level for part number provided by vendor.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 29 }
cmmTransCheckCode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Check code for Base ID Fields.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 30 }
cmmTransCheckCodeExtended OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Check code for the Extended ID Fields.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 31 }
cmmTransNominalBitRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "100MBd"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Nominal signalling rate, units of 100MBd.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 32 }
cmmTransBitRateMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upper bit rate margin, units of 1% above the Nominal Bit Rate.
Value '0' indicates this field is not specified.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 33 }
cmmTransBitRateMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lower bit rate margin, units of 1% below the Nominal Bit Rate.
Value '0' indicates this field is not specified.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 34 }
cmmTransVendorSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial number provided by vendor.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 35 }
cmmTransDateCode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vendor's manufacturing date code.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 36 }
cmmTransDDMSupport OBJECT-TYPE
SYNTAX INTEGER{
yes(1),
no(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether diagnostics monitoring is
supported or not.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 37 }
cmmTransMaxCaseTemp OBJECT-TYPE
SYNTAX INTEGER
UNITS " 0.01 C "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum case temperature in Celsius.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 38 }
cmmTransSFPOptionsImp OBJECT-TYPE
SYNTAX BITS {
reserved(0),
power-level3(1),
paging(2),
internal-retimer-or-cdr(3),
cooled-laser-transmitter(4),
power-level2(5),
power-level1(6),
linear-receiver-output(7),
receiver-decision-threshold(8),
transmitter-wavelength-or-tunable-frequency(9),
rate-select(10),
tx-disable(11),
tx-fault(12),
rx-loss-of-signal(13),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver Options Implemented for SFP Transceiver."
::= { cmmTransEEPROMEntry 39 }
cmmTransQSFPOptionsImp OBJECT-TYPE
SYNTAX BITS {
reserved(0),
tx-inputequalization-auto-adaptive(1),
tx-inputequalization-fixed-programmable(2),
tx-outputemphasis-fixed-programmable(3),
tx-outputamplitude-fixed-programmable(4),
tx-cdr-on-or-off-controllable(5),
tx-cdr-on-or-off-fixed(6),
rx-cdr-on-or-off-controllable(7),
rx-cdr-on-or-off-fixed(8),
tx-cdr-lossoflock(9),
rx-cdr-lossoflock(10),
rx-squelch-disable(11),
rx-output-disable(12),
tx-squelch-disable(13),
tx-squelch(14),
page2-provided(15),
page1-provided(16),
rateselect-controllable(17),
rateselect-fixed(18),
tx-disable(19),
tx-fault(20),
tx-squelch-to-reduce-pave(21),
tx-squelch-to-reduce-oma(22),
tx-loss-of-signal(23),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver Options Implemented for QSFP Transceiver."
::= { cmmTransEEPROMEntry 40 }
cmmTransPresence OBJECT-TYPE
SYNTAX INTEGER{
present(1),
notpresent(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates Transceiver presence status."
::= { cmmTransEEPROMEntry 41 }
cmmTransFrontPanelPortNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Front panel port number"
::= { cmmTransEEPROMEntry 42 }
cmmTransXFPextendedidentifier OBJECT-TYPE
SYNTAX BITS {
powerlevel1-1dot5wmax(0),
powerlevel2-2dot5wmax(1),
powerlevel3-3dot5wmax(2),
powerlevel4-over3dot5w(3),
cdr-none(4),
tx-refclk-input-notrequired(5),
cleicode-present(6),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"XFP transceiver extended identifier to provide extra information."
::= { cmmTransEEPROMEntry 43 }
cmmTransXFP10GEthCompliance OBJECT-TYPE
SYNTAX BITS {
xec-10gbase-sr(0),
xec-10gbase-lr(1),
xec-10gbase-er(2),
xec-10gbase-lrm(3),
xec-10gbase-sw(4),
xec-10gbase-lw(5),
xec-10gbase-ew(6),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"10G ethernet compliant interface supported by XFP transceiver"
::= { cmmTransEEPROMEntry 44 }
cmmTransXFP10GFiberChnCompliance OBJECT-TYPE
SYNTAX BITS {
xfcc-1200-mx-sn-I(0),
xfcc-1200-sm-ll-l(1),
xfcc-exended-reach-1550nm(2),
xfcc-exen-reach-1300nm-fp(3),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"10G fiber channel interface supported by XFP transceiver."
::= { cmmTransEEPROMEntry 45 }
cmmTransXFP10GCopperLinksRsvd OBJECT-TYPE
SYNTAX BITS {
xcl-rsvd(0),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"10G copper link interface supported by XFP transceiver (Not used)."
::= { cmmTransEEPROMEntry 46 }
cmmTransXFPLowerSpeedLinks OBJECT-TYPE
SYNTAX BITS {
xlsl-1000base-sx(0),
xlsl-1000base-lx(1),
xlsl-2xfc-mmf(2),
xlsl-2xfc-smf(3),
xlsl-oc48-sr(4),
xlsl-oc48-ir(5),
xlsl-oc48-lr(6),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Low speed interface supported by XFP transceiver."
::= { cmmTransEEPROMEntry 47 }
cmmTransXFPSonetInterconnect OBJECT-TYPE
SYNTAX BITS {
xsi-i-64-lr(0),
xsi-i-64-l(1),
xsi-i-64-2r(2),
xsi-i-64-2(3),
xsi-i-64-3(4),
xsi-i-64-5(5),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SONETinterconnect interface supported by XFP transceiver."
::= { cmmTransEEPROMEntry 48 }
cmmTransXFPSonetShortHaul OBJECT-TYPE
SYNTAX BITS {
xssh-s-64-l(0),
xssh-s-64-2a(1),
xssh-s-64-2b(2),
xssh-s-64-3a(3),
xssh-s-64-3b(4),
xssh-s-64-5a(5),
xssh-s-64-5b(6),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SONET short haul interface supported by XFP transceiver."
::= { cmmTransEEPROMEntry 49 }
cmmTransXFPSonetLongHaul OBJECT-TYPE
SYNTAX BITS {
xslh-l-64-l(0),
xslh-l-64-2a(1),
xslh-l-64-2b(2),
xslh-l-64-2c(3),
xslh-l-64-3(4),
xlsh-l-g959-1-p1l1-2d2(5),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SONET long haul interface supported by XFP transceiver."
::= { cmmTransEEPROMEntry 50 }
cmmTransXFPSonetVeryLongHaul OBJECT-TYPE
SYNTAX BITS {
xsvh-v-64-2a(0),
xsvh-v-64-2b(1),
xsvh-v-64-3(2),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SONET very long haul interface supported by XFP transceiver."
::= { cmmTransEEPROMEntry 51 }
cmmTransXFPOptionsImp OBJECT-TYPE
SYNTAX BITS {
xfp-vps(0),
xfp-tx-disable(1),
xfp-p-down(2),
xfp-vps-lv(3),
xfp-vps-bypass(4),
xfp-active-fec(5),
xfp-wavelength-tunability(6),
xfp-cmu(7),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Optional enhanced features implemented by XFP transceiver."
::= { cmmTransEEPROMEntry 52 }
cmmTransXFPVoltageAuxMonitor OBJECT-TYPE
SYNTAX BITS {
xfp-vcc-5(0),
xfp-vcc-3(1),
xfp-vcc-2(2),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"XFP Voltages monitored by auxiliary measurements."
::= { cmmTransEEPROMEntry 53 }
cmmTransXFPEncoding OBJECT-TYPE
SYNTAX BITS {
enc-rsvd0(0),
enc-rsvd1(1),
enc-rsvd2(2),
enc-rz(3),
enc-nrz(4),
enc-sonet-scrambled(5),
enc-8b10b(6),
enc-64b66b(7),
unavailable(30),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Code for XFP high speed serial encoding algorithm."
::= { cmmTransEEPROMEntry 54 }
cmmTransWavelength OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver Wavelength in 0.01 nm.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 55 }
cmmTransChannelNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver Frequency channel number.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 56 }
cmmTransGridSpacing OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 GHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver Grid Spacing 0.01 GHz.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 57 }
cmmTransLaserFirstFrequency OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 GHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Laser first frequency in 0.01 GHz.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 58 }
cmmTransLaserLastFrequency OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 GHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Laser last frequency in 0.01 GHz.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 59 }
-- ## DDMChannel Entry
cmmTransDDMTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmTransDDMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about Digital Optical Monitoring for each
interface per channel."
::= { cmmSysObjects 3 }
cmmTransDDMEntry OBJECT-TYPE
SYNTAX CmmTransDDMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about Digital Optical Monitoring for each
interface per channel."
INDEX { cmmStackUnitIndex,
cmmTransIndex,
cmmTransChannelIndex
}
::= { cmmTransDDMTable 1 }
CmmTransDDMEntry ::=
SEQUENCE {
cmmTransChannelIndex INTEGER,
cmmTransTemperature INTEGER,
cmmTransTempAlertThresholdMin INTEGER,
cmmTransTempAlertThresholdMax INTEGER,
cmmTransTempCriticalThresholdMin INTEGER,
cmmTransTempCriticalThresholdMax INTEGER,
cmmTransVoltage INTEGER,
cmmTransVoltAlertThresholdMin INTEGER,
cmmTransVoltAlertThresholdMax INTEGER,
cmmTransVoltCriticalThresholdMin INTEGER,
cmmTransVoltCriticalThresholdMax INTEGER,
cmmTransLaserBiasCurrent INTEGER,
cmmTransLaserBiasCurrAlertThresholdMin INTEGER,
cmmTransLaserBiasCurrAlertThresholdMax INTEGER,
cmmTransLaserBiasCurrCriticalThresholdMin INTEGER,
cmmTransLaserBiasCurrCriticalThresholdMax INTEGER,
cmmTransTxPower INTEGER,
cmmTransTxPowerAlertThresholdMin INTEGER,
cmmTransTxPowerAlertThresholdMax INTEGER,
cmmTransTxPowerCriticalThresholdMin INTEGER,
cmmTransTxPowerCriticalThresholdMax INTEGER,
cmmTransRxPower INTEGER,
cmmTransRxPowerAlertThresholdMin INTEGER,
cmmTransRxPowerAlertThresholdMax INTEGER,
cmmTransRxPowerCriticalThresholdMin INTEGER,
cmmTransRxPowerCriticalThresholdMax INTEGER,
cmmTransTxPowerSupported INTEGER,
cmmTransRxPowerSupported INTEGER,
cmmTransDDMStatus INTEGER,
cmmTransTxState INTEGER,
cmmTransRxLosState INTEGER,
cmmTransTxLosState INTEGER,
cmmTransResetState INTEGER,
cmmTransPowerMode INTEGER,
cmmTransXFPVoltage2 INTEGER,
cmmTransXFPVolt2AlertThresholdMin INTEGER,
cmmTransXFPVolt2AlertThresholdMax INTEGER,
cmmTransXFPVolt2CriticalThresholdMin INTEGER,
cmmTransXFPVolt2CriticalThresholdMax INTEGER,
cmmTransFrequencyError INTEGER,
cmmTransFrequencyErrorAlertThresholdMin INTEGER,
cmmTransFrequencyErrorAlertThresholdMax INTEGER,
cmmTransFrequencyErrorCriticalThresholdMin INTEGER,
cmmTransFrequencyErrorCriticalThresholdMax INTEGER,
cmmTransWavelengthError INTEGER,
cmmTransWavelengthErrorAlertThresholdMin INTEGER,
cmmTransWavelengthErrorAlertThresholdMax INTEGER,
cmmTransWavelengthErrorCriticalThresholdMin INTEGER,
cmmTransWavelengthErrorCriticalThresholdMax INTEGER,
cmmTransCurrentStatus BITS
}
cmmTransChannelIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
" A unique value, greater than zero,for each channel in the transceiver
within the unit. For SFP transceivers, only channel '1' is applicable."
::= { cmmTransDDMEntry 1 }
cmmTransTemperature OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internally measured temperature of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 2 }
cmmTransTempAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Alarm Threshold temperature of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 3 }
cmmTransTempAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Alarm Threshold temperature of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 4}
cmmTransTempCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Critical Threshold temperature of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 5}
cmmTransTempCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Critical Threshold temperature of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 6}
cmmTransVoltage OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internally measured supply voltage of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 7 }
cmmTransVoltAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Alarm Threshold voltage of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 8 }
cmmTransVoltAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Alarm Threshold voltage of the transceiver in Volts.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 9 }
cmmTransVoltCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Critical Threshold voltage of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 10 }
cmmTransVoltCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Critical Threshold voltage of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 11 }
cmmTransLaserBiasCurrent OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internally measured TX Bias Current in Channel of transceiver
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 12 }
cmmTransLaserBiasCurrAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Alarm Threshold of Laser Bias Current per channel.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 13 }
cmmTransLaserBiasCurrAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Alarm Threshold of Laser Bias Current per channel.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 14 }
cmmTransLaserBiasCurrCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Critical Threshold of Laser Bias Current per channel.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 15 }
cmmTransLaserBiasCurrCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Critical Threshold of Laser Bias Current per channel.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 16 }
cmmTransTxPower OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured TX output power in Channel of transceiver.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 17 }
cmmTransTxPowerAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Alarm Threshold of TxOutput Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 18 }
cmmTransTxPowerAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Alarm Threshold of TxOutput Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 19 }
cmmTransTxPowerCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Critical Threshold of TxOutput Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 20 }
cmmTransTxPowerCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Critical Threshold of TxOutput Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 21 }
cmmTransRxPower OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured RX input power in Channel of transceiver
'-100000' value represents no power in the transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 22 }
cmmTransRxPowerAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Alarm Threshold value of Rx Input Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 23 }
cmmTransRxPowerAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Alarm Threshold value of Rx Input Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 24 }
cmmTransRxPowerCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Critical Threshold value of Rx Input Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 25 }
cmmTransRxPowerCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Critical Threshold value of Rx Input Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 26 }
cmmTransTxPowerSupported OBJECT-TYPE
SYNTAX INTEGER {
supported(1),
unsupported(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver TxPower Support"
::= { cmmTransDDMEntry 27 }
cmmTransRxPowerSupported OBJECT-TYPE
SYNTAX INTEGER {
supported(1),
unsupported(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver RxPower Support"
::= { cmmTransDDMEntry 28 }
cmmTransDDMStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
activeunsupported(2),
inactive(3),
inactiveunsupported(4),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver DDM Status"
::= { cmmTransDDMEntry 29 }
cmmTransTxState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver TX State"
::= { cmmTransDDMEntry 30 }
cmmTransRxLosState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver RX Los State"
::= { cmmTransDDMEntry 31 }
cmmTransTxLosState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver TX Los State (applicable only for QSFP)."
::= { cmmTransDDMEntry 32 }
cmmTransResetState OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
reset(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver Reset State (applicable only for QSFP)."
::= { cmmTransDDMEntry 33 }
cmmTransPowerMode OBJECT-TYPE
SYNTAX INTEGER {
low(1),
high(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver Power mode (applicable only for QSFP)."
::= { cmmTransDDMEntry 34 }
cmmTransXFPVoltage2 OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internally measured voltage of the second available supply of the XFP transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 35 }
cmmTransXFPVolt2AlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum warning threshold of the second available voltage of the XFP transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 36 }
cmmTransXFPVolt2AlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum warning threshold of the second available voltage of the XFP transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 37 }
cmmTransXFPVolt2CriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum critical threshold of the second available voltage of the XFP transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 38 }
cmmTransXFPVolt2CriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum critical threshold of the second available voltage of the XFP transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 39 }
cmmTransFrequencyError OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 GHZ"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver Frequency Error.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 40 }
cmmTransFrequencyErrorAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 GHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum alert threshold for transceiver frequency-error.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 41 }
cmmTransFrequencyErrorAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 GHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum alert threshold for transceiver frequency-error.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 42 }
cmmTransFrequencyErrorCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 GHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The miniimum critical threshold for transceiver frequency-error.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 43 }
cmmTransFrequencyErrorCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 GHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum critical threshold for transceiver frequency-error.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 44 }
cmmTransWavelengthError OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.00001 nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver Wavelength Error.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 45 }
cmmTransWavelengthErrorAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.00001 nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum alert threshold for transceiver wavelength-error.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 46 }
cmmTransWavelengthErrorAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.00001 nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum alert threshold for transceiver wavelength-error.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 47 }
cmmTransWavelengthErrorCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.00001 nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum critical threshold for transceiver wavelength-error.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 48 }
cmmTransWavelengthErrorCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.00001 nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum critical threshold for transceiver wavelength-error.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 49 }
cmmTransCurrentStatus OBJECT-TYPE
SYNTAX BITS {
tx-tune(0),
wavelength-unlocked(1),
tec-fault(2),
reserved(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bitmap of supported paramaters of TSFP Current status.
0 - not supported (values only for information)
1 - supported (values can be used for monitoring)."
::= { cmmTransDDMEntry 50 }
-- ### Ram Table
cmmSysRamTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysRamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing RAM related information of the Unit."
::= { cmmSysObjects 4 }
cmmSysRamEntry OBJECT-TYPE
SYNTAX CmmSysRamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing RAM related information of the Unit."
INDEX { cmmStackUnitIndex }
::= { cmmSysRamTable 1 }
CmmSysRamEntry ::=
SEQUENCE {
cmmSysRamTotalMem INTEGER,
cmmSysRamUsedMem INTEGER,
cmmSysRamFreeMem INTEGER,
cmmSysRamAlertThreshold INTEGER,
cmmSysRamCriticalThreshold INTEGER
}
cmmSysRamTotalMem OBJECT-TYPE
SYNTAX INTEGER
UNITS " MBytes "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total RAM available in this unit.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmSysRamEntry 1 }
cmmSysRamUsedMem OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used RAM in this unit.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmSysRamEntry 2 }
cmmSysRamFreeMem OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Free RAM available in this unit.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmSysRamEntry 3 }
cmmSysRamAlertThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RAM usage threshold % for Alert level.
'-100001' indicates unavailable"
::= { cmmSysRamEntry 4 }
cmmSysRamCriticalThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RAM usage threshold % for Critical level.
'-100001' indicates unavailable"
::= { cmmSysRamEntry 5 }
-- ### cmmStackCpuTable
cmmStackCpuTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmStackCpuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing cpu load information."
::= { cmmSysObjects 5 }
cmmStackCpuEntry OBJECT-TYPE
SYNTAX CmmStackCpuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing cpu load information."
INDEX { cmmStackUnitIndex }
::= { cmmStackCpuTable 1 }
CmmStackCpuEntry ::=
SEQUENCE {
cmmStackUnitNumCpuProcessor INTEGER,
cmmStackUnitCpuLoad1Min INTEGER,
cmmStackUnitCpuLoad5Min INTEGER,
cmmStackUnitCpuLoad15Min INTEGER,
cmmStackCpuLoad1minCriticalThreshold INTEGER,
cmmStackCpuLoad1minAlertThreshold INTEGER,
cmmStackCpuLoad5minAlertThreshold INTEGER,
cmmStackCpuLoad15minAlertThreshold INTEGER,
cmmStackUnitCpuUtilization INTEGER,
cmmStackUnitCpuUtilCriticalThreshold INTEGER,
cmmStackUnitCpuUtilAlertThreshold INTEGER
}
cmmStackUnitNumCpuProcessor OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Online Processors Available.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 1 }
cmmStackUnitCpuLoad1Min OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU Load in percentage for last 1 minute.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 2 }
cmmStackUnitCpuLoad5Min OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU Load in percentage for last 5 minutes.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 3 }
cmmStackUnitCpuLoad15Min OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU Load in percentage for last 15 minutes.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 4 }
cmmStackCpuLoad1minCriticalThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU Critical Threshold percentage value for 1 min load.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 5 }
cmmStackCpuLoad1minAlertThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU Alert Threshold percentage value for 1 min load.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 6 }
cmmStackCpuLoad5minAlertThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU Threshold percentage value for 5 min load.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 7 }
cmmStackCpuLoad15minAlertThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU Threshold percentage value for 15 min load.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 8 }
cmmStackUnitCpuUtilization OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU Utilization at this instance in percentage for this unit.
'-100001' indicates unavailable"
::= {cmmStackCpuEntry 9 }
cmmStackUnitCpuUtilCriticalThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU utilization Critical Threshold %.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 10 }
cmmStackUnitCpuUtilAlertThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU utilization Alert Threshold %.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 11 }
-- ### Power Supply Table
cmmSysPowerSupplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysPowerSupplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A power supply entry containing objects for a
particular power supply Unit."
::= { cmmSysObjects 6 }
cmmSysPowerSupplyEntry OBJECT-TYPE
SYNTAX CmmSysPowerSupplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A power supply entry containing objects for a
particular power supply Unit."
INDEX { cmmStackUnitIndex,
cmmSysPSUIndex }
::= { cmmSysPowerSupplyTable 1 }
CmmSysPowerSupplyEntry ::=
SEQUENCE {
cmmSysPSUIndex INTEGER,
cmmSysPowerSupplyOperStatus INTEGER,
cmmSysPowerSupplyType INTEGER,
cmmSysHotSwapStat INTEGER,
cmmSysPSConsumption INTEGER,
cmmSysInputPower INTEGER,
cmmSysInputVoltage INTEGER,
cmmSysOutputVoltage INTEGER,
cmmSysInputCurrent INTEGER,
cmmSysOutputCurrent INTEGER,
cmmSysPSTemperature1 INTEGER,
cmmSysPSTemperature2 INTEGER,
cmmSysPSFan1Rpm INTEGER,
cmmSysPSFan2Rpm INTEGER,
cmmSysPS12VPg INTEGER,
cmmSysPSAcCritical INTEGER,
cmmSysPSParamsSupport BITS,
cmmSysPSCapacity INTEGER,
cmmSysPSConsumptionAlertThresholdMin INTEGER,
cmmSysPSConsumptionAlertThresholdMax INTEGER,
cmmSysInputPowerAlertThresholdMin INTEGER,
cmmSysInputPowerAlertThresholdMax INTEGER,
cmmSysInputVoltageAlertThresholdMin INTEGER,
cmmSysInputVoltageAlertThresholdMax INTEGER,
cmmSysOutputVoltageAlertThresholdMin INTEGER,
cmmSysOutputVoltageAlertThresholdMax INTEGER,
cmmSysInputCurrentAlertThresholdMin INTEGER,
cmmSysInputCurrentAlertThresholdMax INTEGER,
cmmSysOutputCurrentAlertThresholdMin INTEGER,
cmmSysOutputCurrentAlertThresholdMax INTEGER,
cmmSysPSTemperature1AlertThresholdMin INTEGER,
cmmSysPSTemperature1AlertThresholdMax INTEGER,
cmmSysPSTemperature2AlertThresholdMin INTEGER,
cmmSysPSTemperature2AlertThresholdMax INTEGER,
cmmSysPSConsumptionCriticalThresholdMin INTEGER,
cmmSysPSConsumptionCriticalThresholdMax INTEGER,
cmmSysInputPowerCriticalThresholdMin INTEGER,
cmmSysInputPowerCriticalThresholdMax INTEGER,
cmmSysInputVoltageCriticalThresholdMin INTEGER,
cmmSysInputVoltageCriticalThresholdMax INTEGER,
cmmSysOutputVoltageCriticalThresholdMin INTEGER,
cmmSysOutputVoltageCriticalThresholdMax INTEGER,
cmmSysInputCurrentCriticalThresholdMin INTEGER,
cmmSysInputCurrentCriticalThresholdMax INTEGER,
cmmSysOutputCurrentCriticalThresholdMin INTEGER,
cmmSysOutputCurrentCriticalThresholdMax INTEGER,
cmmSysPSTemperature1CriticalThresholdMin INTEGER,
cmmSysPSTemperature1CriticalThresholdMax INTEGER,
cmmSysPSTemperature2CriticalThresholdMin INTEGER,
cmmSysPSTemperature2CriticalThresholdMax INTEGER,
cmmSysInputVoltageOverShutdown INTEGER,
cmmSysInputVoltageUnderShutdown INTEGER,
cmmSysInputVoltageOverResume INTEGER,
cmmSysInputVoltageUnderResume INTEGER,
cmmSysOutputVoltageOverShutdown INTEGER,
cmmSysOutputVoltageUnderShutdown INTEGER,
cmmSysOutputVoltageOverResume INTEGER,
cmmSysOutputVoltageUnderResume INTEGER,
cmmSysInputPowerOverShutdown INTEGER,
cmmSysInputPowerUnderShutdown INTEGER,
cmmSysInputPowerOverResume INTEGER,
cmmSysInputPowerUnderResume INTEGER,
cmmSysOutputPowerOverShutdown INTEGER,
cmmSysOutputPowerUnderShutdown INTEGER,
cmmSysOutputPowerOverResume INTEGER,
cmmSysOutputPowerUnderResume INTEGER,
cmmSysInputCurrentOverShutdown INTEGER,
cmmSysInputCurrentUnderShutdown INTEGER,
cmmSysInputCurrentOverResume INTEGER,
cmmSysInputCurrentUnderResume INTEGER,
cmmSysOutputCurrentOverShutdown INTEGER,
cmmSysOutputCurrentUnderShutdown INTEGER,
cmmSysOutputCurrentOverResume INTEGER,
cmmSysOutputCurrentUnderResume INTEGER,
cmmSysPsuTemperature1OverShutdown INTEGER,
cmmSysPsuTemperature1UnderShutdown INTEGER,
cmmSysPsuTemperature1OverResume INTEGER,
cmmSysPsuTemperature1UnderResume INTEGER,
cmmSysPsuTemperature2OverShutdown INTEGER,
cmmSysPsuTemperature2UnderShutdown INTEGER,
cmmSysPsuTemperature2OverResume INTEGER,
cmmSysPsuTemperature2UnderResume INTEGER,
cmmSysPSTemperature3 INTEGER,
cmmSysPSTemperature3AlertThresholdMin INTEGER,
cmmSysPSTemperature3AlertThresholdMax INTEGER,
cmmSysPSTemperature3CriticalThresholdMin INTEGER,
cmmSysPSTemperature3CriticalThresholdMax INTEGER,
cmmSysPsuTemperature3OverShutdown INTEGER,
cmmSysPsuTemperature3UnderShutdown INTEGER,
cmmSysPsuTemperature3OverResume INTEGER,
cmmSysPsuTemperature3UnderResume INTEGER,
cmmSysPSFan3Rpm INTEGER,
cmmSysPSFan4Rpm INTEGER
}
cmmSysPSUIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique index of the power supply."
::= { cmmSysPowerSupplyEntry 1 }
cmmSysPowerSupplyOperStatus OBJECT-TYPE
SYNTAX INTEGER {
notpresent(1),
running(2),
faulty(3),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the power supply."
::= { cmmSysPowerSupplyEntry 2 }
cmmSysPowerSupplyType OBJECT-TYPE
SYNTAX INTEGER {
ac-normal(1),
ac-reverse(2),
dc-normal(3),
dc-reverse(4),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the power supply."
::= { cmmSysPowerSupplyEntry 3 }
cmmSysHotSwapStat OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status for HOT SWAP."
::= { cmmSysPowerSupplyEntry 4 }
cmmSysPSConsumption OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output Power of Power supply.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmSysPowerSupplyEntry 5 }
cmmSysInputPower OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input Power of Power supply.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmSysPowerSupplyEntry 6 }
cmmSysInputVoltage OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input Voltage of Power supply.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmSysPowerSupplyEntry 7 }
cmmSysOutputVoltage OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output Voltage of Power supply.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmSysPowerSupplyEntry 8 }
cmmSysInputCurrent OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input Current of Power supply.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmSysPowerSupplyEntry 9 }
cmmSysOutputCurrent OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output Current of Power supply.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmSysPowerSupplyEntry 10 }
cmmSysPSTemperature1 OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature of Power supply sensor 1.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmSysPowerSupplyEntry 11 }
cmmSysPSTemperature2 OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature of Power supply sensor 2.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmSysPowerSupplyEntry 12 }
cmmSysPSFan1Rpm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fan1 rpm of Power supply.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmSysPowerSupplyEntry 13 }
cmmSysPSFan2Rpm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fan2 rpm of Power supply.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmSysPowerSupplyEntry 14 }
cmmSysPS12VPg OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of Output Power"
::= { cmmSysPowerSupplyEntry 15 }
cmmSysPSAcCritical OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of Input Power"
::= { cmmSysPowerSupplyEntry 16 }
cmmSysPSParamsSupport OBJECT-TYPE
SYNTAX BITS {
volt-in(0),
volt-out(1),
curr-in(2),
curr-out(3),
power-in(4),
power-out(5),
temp-1(6),
temp-2(7),
fan-1(8),
fan-2(9),
not-applicable(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bitmap of supported paramaters of PSU Unit.
0 - not supported (values only for information)
1 - supported (values can be used for monitoring)."
::= { cmmSysPowerSupplyEntry 17 }
cmmSysPSCapacity OBJECT-TYPE
SYNTAX INTEGER
UNITS "W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output Power of Power supply.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmSysPowerSupplyEntry 18 }
cmmSysPSConsumptionAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert min threshold of PSU output power.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 19 }
cmmSysPSConsumptionAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert max threshold of PSU output power.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 20 }
cmmSysInputPowerAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert min threshold of PSU input power.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 21 }
cmmSysInputPowerAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert max threshold of PSU input power.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 22 }
cmmSysInputVoltageAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert min threshold of PSU input voltage.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 23 }
cmmSysInputVoltageAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert max threshold of PSU input voltage.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 24 }
cmmSysOutputVoltageAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert min threshold of PSU output voltage.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 25 }
cmmSysOutputVoltageAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert max threshold of PSU output voltage.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 26 }
cmmSysInputCurrentAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert min threshold of PSU input current.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 27 }
cmmSysInputCurrentAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert max threshold of PSU input current.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 28 }
cmmSysOutputCurrentAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert min threshold of PSU output current.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 29 }
cmmSysOutputCurrentAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert max threshold of PSU output current.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 30 }
cmmSysPSTemperature1AlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert min threshold of PSU sensor temperature1.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 31 }
cmmSysPSTemperature1AlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert max threshold of PSU sensor temperature1.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 32 }
cmmSysPSTemperature2AlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert min threshold of PSU sensor temperature2.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 33 }
cmmSysPSTemperature2AlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert max threshold of PSU sensor temperature2.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 34 }
cmmSysPSConsumptionCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents min critical threshold of PSU output power.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 35 }
cmmSysPSConsumptionCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents max critical threshold of PSU output power.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 36 }
cmmSysInputPowerCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents min critical threshold of PSU input power.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 37 }
cmmSysInputPowerCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents max critical threshold of PSU input power.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 38 }
cmmSysInputVoltageCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents min critical threshold of PSU input voltage.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 39 }
cmmSysInputVoltageCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents max critical threshold of PSU input voltage.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 40 }
cmmSysOutputVoltageCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents min critical threshold of PSU output voltage.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 41 }
cmmSysOutputVoltageCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents max critical threshold of PSU output voltage.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 42 }
cmmSysInputCurrentCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents min critical threshold of PSU input current.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 43 }
cmmSysInputCurrentCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents max critical threshold of PSU input current.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 44 }
cmmSysOutputCurrentCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents min critical threshold of PSU output current.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 45 }
cmmSysOutputCurrentCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents max critical threshold of PSU output current.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 46 }
cmmSysPSTemperature1CriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents min critical threshold of PSU sensor temperature1.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 47 }
cmmSysPSTemperature1CriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents max critical threshold of PSU sensor temperature1.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 48 }
cmmSysPSTemperature2CriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents min critical threshold of PSU sensor temperature2.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 49 }
cmmSysPSTemperature2CriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents max critical threshold of PSU sensor temperature2.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 50 }
cmmSysInputVoltageOverShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input voltage over shutdown value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 51 }
cmmSysInputVoltageUnderShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input voltage under shutdown value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 52 }
cmmSysInputVoltageOverResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input voltage over resume value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 53 }
cmmSysInputVoltageUnderResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input voltage under resume value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 54 }
cmmSysOutputVoltageOverShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output voltage over shutdown value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 55 }
cmmSysOutputVoltageUnderShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output voltage under shutdown value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 56 }
cmmSysOutputVoltageOverResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output voltage over resume value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 57 }
cmmSysOutputVoltageUnderResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output voltage under resume value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 58 }
cmmSysInputPowerOverShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input power over shutdown value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 59 }
cmmSysInputPowerUnderShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input power under shutdown value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 60 }
cmmSysInputPowerOverResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input power over resume value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 61 }
cmmSysInputPowerUnderResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input power under resume value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 62 }
cmmSysOutputPowerOverShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power over shutdown value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 63 }
cmmSysOutputPowerUnderShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power under shutdown value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 64 }
cmmSysOutputPowerOverResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power over resume value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 65 }
cmmSysOutputPowerUnderResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power under resume value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 66 }
cmmSysInputCurrentOverShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input current over shutdown value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 67 }
cmmSysInputCurrentUnderShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input current under shutdown value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 68 }
cmmSysInputCurrentOverResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input current over resume value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 69 }
cmmSysInputCurrentUnderResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input current under resume value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 70 }
cmmSysOutputCurrentOverShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output current over shutdown value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 71 }
cmmSysOutputCurrentUnderShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output current under shutdown value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 72 }
cmmSysOutputCurrentOverResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output current over resume value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 73 }
cmmSysOutputCurrentUnderResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output current under resume value of PSU.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 74 }
cmmSysPsuTemperature1OverShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PSU Temperature1 over shutdown value.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 75 }
cmmSysPsuTemperature1UnderShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PSU Temperature1 under shutdown value.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 76 }
cmmSysPsuTemperature1OverResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PSU Temperature1 over resume value.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 77 }
cmmSysPsuTemperature1UnderResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PSU Temperature1 under resume value.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 78 }
cmmSysPsuTemperature2OverShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PSU Temperature2 over shutdown value.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 79 }
cmmSysPsuTemperature2UnderShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PSU Temperature2 under shutdown value.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 80 }
cmmSysPsuTemperature2OverResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PSU Temperature2 over resume value.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 81 }
cmmSysPsuTemperature2UnderResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PSU Temperature2 under resume value.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 82 }
cmmSysPSTemperature3 OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature of Power supply sensor 3.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmSysPowerSupplyEntry 83 }
cmmSysPSTemperature3AlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert min threshold of PSU sensor temperature3.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 84 }
cmmSysPSTemperature3AlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents alert max threshold of PSU sensor temperature3.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 85 }
cmmSysPSTemperature3CriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents min critical threshold of PSU sensor temperature3.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 86 }
cmmSysPSTemperature3CriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents max critical threshold of PSU sensor temperature3.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 87 }
cmmSysPsuTemperature3OverShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PSU Temperature3 over shutdown value.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 88 }
cmmSysPsuTemperature3UnderShutdown OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PSU Temperature3 under shutdown value.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 89 }
cmmSysPsuTemperature3OverResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PSU Temperature3 over resume value.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 90 }
cmmSysPsuTemperature3UnderResume OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PSU Temperature3 under resume value.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 91 }
cmmSysPSFan3Rpm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fan3 rpm of Power supply.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmSysPowerSupplyEntry 92 }
cmmSysPSFan4Rpm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fan4 rpm of Power supply.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmSysPowerSupplyEntry 93 }
-- ## Power Rail Table
cmmSysPowerRailTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysPowerRailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing objects for power rails in the unit."
::= { cmmSysObjects 7 }
cmmSysPowerRailEntry OBJECT-TYPE
SYNTAX CmmSysPowerRailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing objects for power rails in the unit."
INDEX { cmmStackUnitIndex }
::= { cmmSysPowerRailTable 1 }
CmmSysPowerRailEntry ::=
SEQUENCE {
cmmSysPOWERVDDR INTEGER,
cmmSysPOWERCORE INTEGER,
cmmSysV1P1POWERRAIL INTEGER,
cmmSysMAINBOARDPOWERRAIL INTEGER,
cmmSysV1P05POWERRAIL INTEGER,
cmmSysV1P5POWERRAIL INTEGER,
cmmSysVCCPOWERRAIL INTEGER,
cmmSysSBV1P5POWERRAIL INTEGER,
cmmSysV1P0POWERRAIL INTEGER,
cmmSysV3P3POWERRAIL INTEGER,
cmmSysV1P8POWERRAIL INTEGER,
cmmSysV1P35POWERRAIL INTEGER,
cmmSysVCC5V INTEGER,
cmmSysVCC33V INTEGER,
cmmSysVCCMAC1V INTEGER,
cmmSysVCCMACAVS1V INTEGER,
cmmSysVCCV1P05 INTEGER,
cmmSysVCCV1P5 INTEGER,
cmmSysVCCV1P8 INTEGER,
cmmSysVCCAVS1V INTEGER,
cmmSysDDRVTT INTEGER,
cmmSysSBV1P9POWERRAIL INTEGER,
cmmSysVCCMACV1P25 INTEGER,
cmmSysMACV1P8 INTEGER,
cmmSysPS1 INTEGER,
cmmSysPS2 INTEGER,
cmmSysPS1POWERRAIL INTEGER,
cmmSysPS2POWERRAIL INTEGER,
cmmSysPS1V12POWERRAIL INTEGER,
cmmSysPS2V12POWERRAIL INTEGER,
cmmSysPS1ACALERTPOWERRAIL INTEGER,
cmmSysPS2ACALERTPOWERRAIL INTEGER,
cmmSysPOWERVCCP INTEGER,
cmmSysV5APOWERRAIL INTEGER,
cmmSysV3P3APOWERRAIL INTEGER,
cmmSysXP0RV75POWERRAIL INTEGER,
cmmSysXP1RV07CPPOWERRAIL INTEGER
}
cmmSysPOWERVDDR OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power statistics for VCC 3.3v on Main board."
::= { cmmSysPowerRailEntry 1 }
cmmSysPOWERCORE OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power statistics for Mac 1v on Main board."
::= { cmmSysPowerRailEntry 2 }
cmmSysV1P1POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power statistics for Mac AVS 1v on Main board."
::= { cmmSysPowerRailEntry 3 }
cmmSysMAINBOARDPOWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status for Main Board."
::= { cmmSysPowerRailEntry 4 }
cmmSysV1P05POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of V1P05POWERRAIL."
::= { cmmSysPowerRailEntry 5 }
cmmSysV1P5POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of V1P5POWERRAIL."
::= { cmmSysPowerRailEntry 6 }
cmmSysVCCPOWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of VCCPOWERRAIL."
::= { cmmSysPowerRailEntry 7 }
cmmSysSBV1P5POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of SBV1P5POWERRAIL."
::= { cmmSysPowerRailEntry 8 }
cmmSysV1P0POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power rail 1.0V Status."
::= { cmmSysPowerRailEntry 9 }
cmmSysV3P3POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power rail 3.3V Status."
::= { cmmSysPowerRailEntry 10 }
cmmSysV1P8POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power rail 1.8V Status."
::= { cmmSysPowerRailEntry 11 }
cmmSysV1P35POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power Rail 1.35 Status."
::= { cmmSysPowerRailEntry 12 }
cmmSysVCC5V OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of VCC 5V."
::= { cmmSysPowerRailEntry 13 }
cmmSysVCC33V OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of VCC 33 V."
::= { cmmSysPowerRailEntry 14 }
cmmSysVCCMAC1V OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of VCCMAC1V."
::= { cmmSysPowerRailEntry 15 }
cmmSysVCCMACAVS1V OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of VCCMACAVS1V."
::= { cmmSysPowerRailEntry 16 }
cmmSysVCCV1P05 OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power Status of VCCV1P05."
::= { cmmSysPowerRailEntry 17 }
cmmSysVCCV1P5 OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power Status of VCCV1P5."
::= { cmmSysPowerRailEntry 18 }
cmmSysVCCV1P8 OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of VCCV1P8."
::= { cmmSysPowerRailEntry 19 }
cmmSysVCCAVS1V OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of VCCAVS1V."
::= { cmmSysPowerRailEntry 20 }
cmmSysDDRVTT OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power statistics for VCC 5v on Main board."
::= { cmmSysPowerRailEntry 21 }
cmmSysSBV1P9POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power rail 1.9V status."
::= { cmmSysPowerRailEntry 22 }
cmmSysVCCMACV1P25 OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of VCC MAC 1.25 V."
::= { cmmSysPowerRailEntry 23 }
cmmSysMACV1P8 OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of MAC 1.8 V."
::= { cmmSysPowerRailEntry 24 }
cmmSysPS1 OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of Power Supply 1 on Main board."
::= { cmmSysPowerRailEntry 25 }
cmmSysPS2 OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of Power Supply 2 on Main board."
::= { cmmSysPowerRailEntry 26 }
cmmSysPS1POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power rail status of Power Supply 1 on Main board."
::= { cmmSysPowerRailEntry 27 }
cmmSysPS2POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power rail status of Power Supply 2 on Main board."
::= { cmmSysPowerRailEntry 28 }
cmmSysPS1V12POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power rail status of Power Supply 1 12V on Main board."
::= { cmmSysPowerRailEntry 29 }
cmmSysPS2V12POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power rail status of Power Supply 2 12V on Main board."
::= { cmmSysPowerRailEntry 30 }
cmmSysPS1ACALERTPOWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power rail status of Power Supply 1 AC critical on Main board."
::= { cmmSysPowerRailEntry 31 }
cmmSysPS2ACALERTPOWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power rail status of Power Supply 2 AC critical on Main board."
::= { cmmSysPowerRailEntry 32 }
cmmSysPOWERVCCP OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status for VCCP on Main board."
::= { cmmSysPowerRailEntry 33 }
cmmSysV5APOWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power rail 5VA status on Main board."
::= { cmmSysPowerRailEntry 34 }
cmmSysV3P3APOWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power rail 3.3VA status on Main board."
::= { cmmSysPowerRailEntry 35 }
cmmSysXP0RV75POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of XP0R 75V on Main board."
::= { cmmSysPowerRailEntry 36 }
cmmSysXP1RV07CPPOWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of XP1R 07V CP on Main board."
::= { cmmSysPowerRailEntry 37 }
-- ## Fan Tray Table
cmmFanTrayTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmFanTrayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Fan Tray entry containing information of fan tray."
::= { cmmSysObjects 8 }
cmmFanTrayEntry OBJECT-TYPE
SYNTAX CmmFanTrayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Fan Tray entry containing information of fan tray."
INDEX { cmmStackUnitIndex,
cmmFanTrayNumber
}
::= { cmmFanTrayTable 1 }
CmmFanTrayEntry ::=
SEQUENCE {
cmmFanTrayNumber INTEGER,
cmmFanTrayStatus INTEGER,
cmmFanTrayLedColor LedColorCode
}
cmmFanTrayNumber OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the fan tray Number."
::= { cmmFanTrayEntry 1 }
cmmFanTrayStatus OBJECT-TYPE
SYNTAX INTEGER {
notpresent(1),
present(2),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the fan tray status."
::= { cmmFanTrayEntry 2 }
cmmFanTrayLedColor OBJECT-TYPE
SYNTAX LedColorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the Color of the fan led."
::= { cmmFanTrayEntry 3 }
-- ## Fan Entry in FanTray Table
cmmFanTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A fan entry containing objects for a particular fan in a fan tray."
::= { cmmSysObjects 9 }
cmmFanEntry OBJECT-TYPE
SYNTAX CmmFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A fan entry containing objects for a particular fan in a fan tray."
INDEX { cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanIndex }
::= { cmmFanTable 1 }
CmmFanEntry ::=
SEQUENCE {
cmmFanIndex INTEGER,
cmmFanRpm INTEGER,
cmmFanRpmMin INTEGER,
cmmFanRpmMax INTEGER,
cmmFanStatus INTEGER,
cmmFanLocation INTEGER
}
cmmFanIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of the fan per fantray."
::= { cmmFanEntry 1 }
cmmFanRpm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the fan rpm.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmFanEntry 2 }
cmmFanRpmMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the minimum supported RPM of fan.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmFanEntry 3 }
cmmFanRpmMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the maximum supported RPM of fan.
'-100001' indicates unavailable.
'-100002' indicates not-applicable."
::= { cmmFanEntry 4 }
cmmFanStatus OBJECT-TYPE
SYNTAX INTEGER {
notpresent(1),
running(2),
faulty(3),
stalled(4),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the fan."
::= { cmmFanEntry 5 }
cmmFanLocation OBJECT-TYPE
SYNTAX INTEGER {
front(1),
rear(2),
unknown(3),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The location of fan in tray"
::= { cmmFanEntry 6 }
-- ## Stack Temperature Table
cmmSysTemperatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A temperature entry containing objects related to particular temperature sensor"
::= { cmmSysObjects 10 }
cmmSysTemperatureEntry OBJECT-TYPE
SYNTAX CmmSysTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A temperature entry containing objects related to particular temperature sensor"
INDEX { cmmStackUnitIndex,
cmmSysTemperatureSensorIndex }
::= { cmmSysTemperatureTable 1 }
CmmSysTemperatureEntry ::=
SEQUENCE {
cmmSysTemperatureSensorIndex INTEGER,
cmmSysTemperatureSensorName DisplayString,
cmmSysTemperatureValue INTEGER,
cmmSysTempEmergencyThresholdMin INTEGER,
cmmSysTempEmergencyThresholdMax INTEGER,
cmmSysTempCriticalThresholdMin INTEGER,
cmmSysTempCriticalThresholdMax INTEGER,
cmmSysTempAlertThresholdMin INTEGER,
cmmSysTempAlertThresholdMax INTEGER,
cmmSysTempMinValue INTEGER,
cmmSysTempMaxValue INTEGER,
cmmSysTempAverageValue INTEGER
}
cmmSysTemperatureSensorIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Index"
::= { cmmSysTemperatureEntry 1 }
cmmSysTemperatureSensorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature Sensor Name.
Blank indicates unavailable"
::= { cmmSysTemperatureEntry 2 }
cmmSysTemperatureValue OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor value.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 3 }
cmmSysTempEmergencyThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Min Emergency threshold.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 4 }
cmmSysTempEmergencyThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Max Emergency threshold.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 5 }
cmmSysTempCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Min Critical threshold.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 6 }
cmmSysTempCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Max Critical threshold.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 7 }
cmmSysTempAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Min Alert threshold.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 8 }
cmmSysTempAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Max Alert threshold.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 9 }
cmmSysTempMinValue OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Min value since 72hrs.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 10 }
cmmSysTempMaxValue OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Max value since 72hrs.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 11 }
cmmSysTempAverageValue OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Average value since 72hrs.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 12 }
-- ## Component Status Table
cmmSysComponentStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysComponentStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing each component status in the Unit."
::= { cmmSysObjects 11 }
cmmSysComponentStatusEntry OBJECT-TYPE
SYNTAX CmmSysComponentStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing each component status in the Unit."
INDEX { cmmStackUnitIndex }
::= { cmmSysComponentStatusTable 1 }
CmmSysComponentStatusEntry ::=
SEQUENCE {
cmmSysPsu1Status INTEGER,
cmmSysPsu1LedColor LedColorCode,
cmmSysPsu2Status INTEGER,
cmmSysPsu2LedColor LedColorCode,
cmmSysLocatorLedStatus INTEGER,
cmmSysLocatorLedColor LedColorCode,
cmmSysMasterLedStatus INTEGER,
cmmSysMasterLedColor LedColorCode,
cmmSysFanStatus INTEGER,
cmmSysFrontFanLedColor LedColorCode,
cmmSysRamStatus INTEGER,
cmmSysCpuStatus INTEGER,
cmmSysDiskStatus INTEGER,
cmmSysTemperatureStatus INTEGER
}
cmmSysPsu1Status OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
minor-fault(2),
major-fault(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of PSU1."
::= { cmmSysComponentStatusEntry 1 }
cmmSysPsu1LedColor OBJECT-TYPE
SYNTAX LedColorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the Color of the power led of PSU1."
::= { cmmSysComponentStatusEntry 2 }
cmmSysPsu2Status OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
minor-fault(2),
major-fault(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of PSU2."
::= { cmmSysComponentStatusEntry 3 }
cmmSysPsu2LedColor OBJECT-TYPE
SYNTAX LedColorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the Color of the power led of PSU2."
::= { cmmSysComponentStatusEntry 4 }
cmmSysLocatorLedStatus OBJECT-TYPE
SYNTAX INTEGER {
notpresent(1),
on(2),
off(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of Locater led."
::= { cmmSysComponentStatusEntry 5 }
cmmSysLocatorLedColor OBJECT-TYPE
SYNTAX LedColorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the Color of the Locator led."
::= { cmmSysComponentStatusEntry 6 }
cmmSysMasterLedStatus OBJECT-TYPE
SYNTAX INTEGER {
notpresent(1),
on(2),
off(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of Master led."
::= { cmmSysComponentStatusEntry 7 }
cmmSysMasterLedColor OBJECT-TYPE
SYNTAX LedColorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the Color of the master led."
::= { cmmSysComponentStatusEntry 8 }
cmmSysFanStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
minor-fault(2),
major-fault(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Overall Status of Fans in the Unit."
::= { cmmSysComponentStatusEntry 9 }
cmmSysFrontFanLedColor OBJECT-TYPE
SYNTAX LedColorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the Color of the Front Fan led."
::= { cmmSysComponentStatusEntry 10 }
cmmSysRamStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
minor-fault(2),
major-fault(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of RAM in the unit."
::= { cmmSysComponentStatusEntry 11 }
cmmSysCpuStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
minor-fault(2),
major-fault(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of CPU in the unit."
::= { cmmSysComponentStatusEntry 12 }
cmmSysDiskStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
minor-fault(2),
major-fault(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of Disk in the unit."
::= { cmmSysComponentStatusEntry 13 }
cmmSysTemperatureStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
minor-fault(2),
major-fault(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of Temperature sensors in the unit."
::= { cmmSysComponentStatusEntry 14 }
-- ## Software Module Table
cmmSysSwModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysSwModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Software module information"
::= { cmmSysObjects 12 }
cmmSysSwModuleEntry OBJECT-TYPE
SYNTAX CmmSysSwModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Software module information"
INDEX { cmmStackUnitIndex }
::= { cmmSysSwModuleTable 1 }
CmmSysSwModuleEntry ::=
SEQUENCE {
cmmSysSwRuntimeImgVersion DisplayString,
cmmSysSwRuntimeImgDate DateAndTime
}
cmmSysSwRuntimeImgVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the software
module version that is currently
running on the unit.
The software release version is in
the format as follow:
<major version>.<minor version>.<minor
version>......
'1.2' indicate major version of 1 and
minor release of 2.
Blank indicates unavailable"
::= { cmmSysSwModuleEntry 1 }
cmmSysSwRuntimeImgDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The release date of this software module.
Blank indicates unavailable"
::= { cmmSysSwModuleEntry 2 }
-- ## Switching Chip Temperature Table
cmmSwitchTemperatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSwitchTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A temperature entry containing objects related to particular temp monitor in switching chip"
::= { cmmSysObjects 13 }
cmmSwitchTemperatureEntry OBJECT-TYPE
SYNTAX CmmSwitchTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A temperature entry containing objects related to particular temp monitor in switching chip"
INDEX { cmmStackUnitIndex,
cmmSwitchTemperatureSensorIndex }
::= { cmmSwitchTemperatureTable 1 }
CmmSwitchTemperatureEntry ::=
SEQUENCE {
cmmSwitchTemperatureSensorIndex INTEGER,
cmmSwitchTemperatureValue INTEGER,
cmmSwitchTempPeakValue INTEGER
}
cmmSwitchTemperatureSensorIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Monitor Index inside chip."
::= { cmmSwitchTemperatureEntry 1 }
cmmSwitchTemperatureValue OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature monitor value.
'-100001' indicates unavailable"
::= { cmmSwitchTemperatureEntry 2 }
cmmSwitchTempPeakValue OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature monitor peak value since last reading.
'-100001' indicates unavailable"
::= { cmmSwitchTemperatureEntry 3 }
-- ## Hard disk Table
cmmSysHardDiskTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysHardDiskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Hard disk information of the Unit."
::= { cmmSysObjects 14 }
cmmSysHardDiskEntry OBJECT-TYPE
SYNTAX CmmSysHardDiskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Hard disk information of the Unit."
INDEX { cmmStackUnitIndex }
::= { cmmSysHardDiskTable 1 }
CmmSysHardDiskEntry ::=
SEQUENCE {
cmmSysHarddiskSerialno DisplayString,
cmmSysHarddiskModelno DisplayString,
cmmSysHarddiskFirmwarerev DisplayString,
cmmSysHarddiskCylinders INTEGER,
cmmSysHarddiskHeads INTEGER,
cmmSysHarddiskSectors INTEGER,
cmmSysHarddiskUnformattedBytesorTrack INTEGER,
cmmSysHarddiskUnformattedBytesorSector INTEGER,
cmmSysHarddiskRevisionNum DisplayString,
cmmSysHarddiskTotalsize INTEGER,
cmmSysHarddiskUsedMem INTEGER,
cmmSysHarddiskFreeMem INTEGER,
cmmSysHarddiskUsageAlertThreshold INTEGER,
cmmSysHarddiskUsageCriticalThreshold INTEGER,
cmmSysHardDiskRemainLifeAlertThreshold INTEGER,
cmmSysHardDiskRemainLifeCriticalThreshold INTEGER,
cmmSysHardDiskRemainLife INTEGER,
cmmSysHardDiskAvailableReservedSpaceAlertThreshold INTEGER,
cmmSysHardDiskAvailableReservedSpaceCriticalThreshold INTEGER,
cmmSysHardDiskAvailableReservedSpace INTEGER,
cmmSysHardDiskReallocSectorsCount INTEGER,
cmmSysHardDiskUncorrectSectorCount INTEGER,
cmmSysHardDiskActivityMonitoringInterval INTEGER,
cmmSysHardDiskActivityMonitoringRead INTEGER,
cmmSysHardDiskActivityMonitoringWrite INTEGER,
cmmSysHardDiskActivityMonitoringReadCurrent INTEGER,
cmmSysHardDiskActivityMonitoringWriteCurrent INTEGER,
cmmSysHardDiskActivityMonitoringReadThreshold INTEGER,
cmmSysHardDiskActivityMonitoringWriteThreshold INTEGER,
cmmSysHardDiskManufacturerId DisplayString,
cmmSysHardDiskManufactureDate DisplayString,
cmmSysHardDiskDeviceType DisplayString,
cmmSysHardDiskCacheSize INTEGER,
cmmSysHardDiskStorageStatus INTEGER
}
cmmSysHarddiskSerialno OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's serial number.
Blank indicates unavailable"
::= { cmmSysHardDiskEntry 1 }
cmmSysHarddiskModelno OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's model number.
Blank indicates unavailable"
::= { cmmSysHardDiskEntry 2 }
cmmSysHarddiskFirmwarerev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's firmware revision.
Blank indicates unavailable"
::= { cmmSysHardDiskEntry 3 }
cmmSysHarddiskCylinders OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's Cylinder unit.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 4 }
cmmSysHarddiskHeads OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's Head unit.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 5 }
cmmSysHarddiskSectors OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's Sector unit.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 6 }
cmmSysHarddiskUnformattedBytesorTrack OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's unformated bytes or track.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 7 }
cmmSysHarddiskUnformattedBytesorSector OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's unformated bytes or sectors.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 8 }
cmmSysHarddiskRevisionNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's Revision number.
Blank indicates unavailable"
::= { cmmSysHardDiskEntry 9 }
cmmSysHarddiskTotalsize OBJECT-TYPE
SYNTAX INTEGER
UNITS " MBytes "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total memory of the Hard disk.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 10 }
cmmSysHarddiskUsedMem OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Used Memory in the Hard disk.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 11 }
cmmSysHarddiskFreeMem OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Free Memory in the Hard disk.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 12 }
cmmSysHarddiskUsageAlertThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk usage threshold % for Alert Level.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 13 }
cmmSysHarddiskUsageCriticalThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk usage threshold % for Critical Level.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 14 }
cmmSysHardDiskRemainLifeAlertThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk Remain Life threshold % for Alert Level.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 15 }
cmmSysHardDiskRemainLifeCriticalThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk Remain Life threshold % for Critical Level.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 16 }
cmmSysHardDiskRemainLife OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk Remain life %.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 17 }
cmmSysHardDiskAvailableReservedSpaceAlertThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk Available Reserved Space threshold % for alert Level.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 18 }
cmmSysHardDiskAvailableReservedSpaceCriticalThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk Available Reserved Space threshold % for Critical Level.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 19 }
cmmSysHardDiskAvailableReservedSpace OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk Available Reserved Space %.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 20 }
cmmSysHardDiskReallocSectorsCount OBJECT-TYPE
SYNTAX INTEGER
UNITS " 1 "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk Reallocated Sectors Count.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 21 }
cmmSysHardDiskUncorrectSectorCount OBJECT-TYPE
SYNTAX INTEGER
UNITS " 1 "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk Uncorrectable Sectors Count.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 22 }
cmmSysHardDiskActivityMonitoringInterval OBJECT-TYPE
SYNTAX INTEGER
UNITS " Seconds "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk activity monitoring interval.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 23 }
cmmSysHardDiskActivityMonitoringRead OBJECT-TYPE
SYNTAX INTEGER
UNITS " kBps "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk activity monitoring average read.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 24 }
cmmSysHardDiskActivityMonitoringWrite OBJECT-TYPE
SYNTAX INTEGER
UNITS " kBps "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk activity monitoring average write.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 25 }
cmmSysHardDiskActivityMonitoringReadCurrent OBJECT-TYPE
SYNTAX INTEGER
UNITS " kBps "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk activity monitoring current read.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 26 }
cmmSysHardDiskActivityMonitoringWriteCurrent OBJECT-TYPE
SYNTAX INTEGER
UNITS " kB/s "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk activity monitoring current write.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 27 }
cmmSysHardDiskActivityMonitoringReadThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS " kBps "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk activity monitoring read threshold.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 28 }
cmmSysHardDiskActivityMonitoringWriteThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS " kBps "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk activity monitoring write threshold.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 29 }
cmmSysHardDiskManufacturerId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's manufacturer identification
defined by JEDEC."
::= { cmmSysHardDiskEntry 30 }
cmmSysHardDiskManufactureDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's manufacture date."
::= { cmmSysHardDiskEntry 31 }
cmmSysHardDiskDeviceType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's type. Removable or Embedded."
::= { cmmSysHardDiskEntry 32 }
cmmSysHardDiskCacheSize OBJECT-TYPE
SYNTAX INTEGER
UNITS " KBytes "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's cache memory size.
'0' indicates unavailable"
::= { cmmSysHardDiskEntry 33 }
cmmSysHardDiskStorageStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
critical(2),
alert(3),
undefined(4),
unavailable(-100001),
not-applicable(-100002)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk storage status (EOL).
'-100001' indicates unavailable,
'-100002' indicates not-applicable."
::= { cmmSysHardDiskEntry 34 }
-- ## System Overall Status Table
cmmSystemStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSystemStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table containing overall system status of the Unit."
::= { cmmSysObjects 15 }
cmmSystemStatusEntry OBJECT-TYPE
SYNTAX CmmSystemStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing component status and overall system status of the Unit."
INDEX { cmmStackUnitIndex }
::= { cmmSystemStatusTable 1 }
CmmSystemStatusEntry ::=
SEQUENCE {
cmmSystemMinorFaultStatus SystemStatusCode,
cmmSystemMajorFaultStatus SystemStatusCode,
cmmSysStatus INTEGER,
cmmSysLedColor LedColorCode
}
cmmSystemMinorFaultStatus OBJECT-TYPE
SYNTAX SystemStatusCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"overall Critical status caused by individual components in the unit."
::= { cmmSystemStatusEntry 1 }
cmmSystemMajorFaultStatus OBJECT-TYPE
SYNTAX SystemStatusCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"overall Alert status caused by individual components in the unit."
::= { cmmSystemStatusEntry 2 }
cmmSysStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1), -- self diagnostics test is success
minor-fault(2), -- minor system fault
major-fault(3), -- major system fault
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Overall Status/Health of System."
::= { cmmSystemStatusEntry 3 }
cmmSysLedColor OBJECT-TYPE
SYNTAX LedColorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the Color of the system led."
::= { cmmSystemStatusEntry 4 }
-- CPU per core utilisation table
cmmCpuCoreUtilTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmCpuCoreUtilEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing cpu utilisation information."
::= { cmmSysObjects 16 }
cmmCpuCoreUtilEntry OBJECT-TYPE
SYNTAX CmmCpuCoreUtilEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing cpu utilisation information."
INDEX { cmmStackUnitIndex, cmmCpuCoreIndex }
::= { cmmCpuCoreUtilTable 1 }
CmmCpuCoreUtilEntry ::=
SEQUENCE {
cmmCpuCoreIndex INTEGER,
cmmCpuCoreUtilization INTEGER,
cmmCpuCoreModelName DisplayString
}
cmmCpuCoreIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Cpu Core number."
::= { cmmCpuCoreUtilEntry 1 }
cmmCpuCoreUtilization OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cpu Utilization per core."
::= { cmmCpuCoreUtilEntry 2 }
cmmCpuCoreModelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays CPU processor Model Name.
Blank indicates unavailable"
::= { cmmCpuCoreUtilEntry 3 }
-- ### Psu Fru Table
cmmPsuFruTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmPsuFruEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A psu fru entry containing objects
for PSU inventory information"
::= { cmmSysObjects 17 }
cmmPsuFruEntry OBJECT-TYPE
SYNTAX CmmPsuFruEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A psu fru entry containing objects for a
particular power supply Unit."
INDEX { cmmStackUnitIndex, cmmSysPSUIndex }
::= { cmmPsuFruTable 1 }
CmmPsuFruEntry ::=
SEQUENCE {
cmmPsuPpid DisplayString,
cmmPsuCountryofOrigin DisplayString,
cmmPsuPpidPartNum DisplayString,
cmmPsuPpidPartNumRev DisplayString,
cmmPsuManufactureId DisplayString,
cmmPsuDateCode OCTET STRING,
cmmPsuSerialNumber DisplayString,
cmmPsuPartNum DisplayString,
cmmPsuPartNumRev DisplayString,
cmmPsuNumOfFanPerTray INTEGER,
cmmPsuType INTEGER,
cmmPsuServiceTag DisplayString,
cmmPsuIanaNum DisplayString,
cmmPsuFanMaxRpm INTEGER,
cmmPsuAirFlowDir DisplayString,
cmmPsuMaxOutputWatt INTEGER
}
cmmPsuPpid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique ppid of the power supply.
Blank indicates unavailable"
::= { cmmPsuFruEntry 1 }
cmmPsuCountryofOrigin OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Country of Origin
Blank indicates unavailable"
::= { cmmPsuFruEntry 2 }
cmmPsuPpidPartNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPID Part Number
Blank indicates unavailable"
::= { cmmPsuFruEntry 3 }
cmmPsuPpidPartNumRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPID Part Number Rev
Blank indicates unavailable"
::= { cmmPsuFruEntry 4 }
cmmPsuManufactureId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Manufacturer ID
Blank indicates unavailable"
::= { cmmPsuFruEntry 5 }
cmmPsuDateCode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8 | 11))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date Code
Blank indicates unavailable"
::= { cmmPsuFruEntry 6 }
cmmPsuSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial Number
Blank indicates unavailable"
::= { cmmPsuFruEntry 7 }
cmmPsuPartNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Part Number
Blank indicates unavailable"
::= { cmmPsuFruEntry 8 }
cmmPsuPartNumRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Part Number Revision
Blank indicates unavailable"
::= { cmmPsuFruEntry 9 }
cmmPsuNumOfFanPerTray OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Fans in the tray
'-100001' indicates unavailable"
::= { cmmPsuFruEntry 10 }
cmmPsuType OBJECT-TYPE
SYNTAX INTEGER {
ac-normal(1),
ac-reverse(2),
dc-normal(3),
dc-reverse(4),
not-applicable(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of psu"
::= { cmmPsuFruEntry 11 }
cmmPsuServiceTag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service Tag
Blank indicates unavailable"
::= { cmmPsuFruEntry 12 }
cmmPsuIanaNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IANA Number
Blank indicates unavailable"
::= { cmmPsuFruEntry 13 }
cmmPsuFanMaxRpm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max RPM
'-100001' indicates unavailable"
::= { cmmPsuFruEntry 14 }
cmmPsuAirFlowDir OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Airflow Direction
Blank indicates unavailable"
::= { cmmPsuFruEntry 15 }
cmmPsuMaxOutputWatt OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Output Wattage
'-100001' indicates unavailable"
::= { cmmPsuFruEntry 16 }
-- ### Fan Fru Table
cmmFanFruTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmFanFruEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A fan fru entry containing objects for a
particular fantray."
::= { cmmSysObjects 18 }
cmmFanFruEntry OBJECT-TYPE
SYNTAX CmmFanFruEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A fan fru entry containing objects for a
particular fantray"
INDEX { cmmStackUnitIndex, cmmFanTrayNumber}
::= { cmmFanFruTable 1 }
CmmFanFruEntry ::=
SEQUENCE {
cmmFanPpid DisplayString,
cmmFanCountryofOrigin DisplayString,
cmmFanPpidPartNum DisplayString,
cmmFanPpidPartNumRev DisplayString,
cmmFanManufactureId DisplayString,
cmmFanDateCode DisplayString,
cmmFanSerialNumber DisplayString,
cmmFanPartNum DisplayString,
cmmFanPartNumRev DisplayString,
cmmFanNumOfFanPerTray INTEGER,
cmmFanType INTEGER,
cmmFanServiceTag DisplayString,
cmmFanIanaNum DisplayString,
cmmFanMaxRpm INTEGER
}
cmmFanPpid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique ppid of the fan tray
Blank indicates unavailable"
::= { cmmFanFruEntry 1 }
cmmFanCountryofOrigin OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Country of Origin
Blank indicates unavailable"
::= { cmmFanFruEntry 2 }
cmmFanPpidPartNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPID Part Number
Blank indicates unavailable"
::= { cmmFanFruEntry 3 }
cmmFanPpidPartNumRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPID Part Number Rev
Blank indicates unavailable"
::= { cmmFanFruEntry 4 }
cmmFanManufactureId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Manufacturer ID
Blank indicates unavailable"
::= { cmmFanFruEntry 5 }
cmmFanDateCode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date Code
Blank indicates unavailable"
::= { cmmFanFruEntry 6 }
cmmFanSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial Number
Blank indicates unavailable"
::= { cmmFanFruEntry 7 }
cmmFanPartNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Part Number
Blank indicates unavailable"
::= { cmmFanFruEntry 8 }
cmmFanPartNumRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Part Number Revision
Blank indicates unavailable"
::= { cmmFanFruEntry 9 }
cmmFanNumOfFanPerTray OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Fans in the tray
'-100001' indicates unavailable"
::= { cmmFanFruEntry 10 }
cmmFanType OBJECT-TYPE
SYNTAX INTEGER {
blow-outfan(1),
blow-infan(2),
fan-type-unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fan Type"
::= { cmmFanFruEntry 11 }
cmmFanServiceTag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service Tag
Blank indicates unavailable"
::= { cmmFanFruEntry 12 }
cmmFanIanaNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IANA Number
Blank indicates unavailable"
::= { cmmFanFruEntry 13 }
cmmFanMaxRpm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max RPM
'-100001' indicates unavailable"
::= { cmmFanFruEntry 14 }
-- ## Stack CPLD Table
cmmSysCpldTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysCpldEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cpld entry containing objects related to CPLD versions"
::= { cmmSysObjects 19 }
cmmSysCpldEntry OBJECT-TYPE
SYNTAX CmmSysCpldEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cpld entry containing objects related to CPLD versions"
INDEX { cmmStackUnitIndex,
cmmSysCpldIndex }
::= { cmmSysCpldTable 1 }
CmmSysCpldEntry ::=
SEQUENCE {
cmmSysCpldIndex INTEGER,
cmmSysCpldName DisplayString,
cmmSysCpldSupportedVer DisplayString,
cmmSysCpldCurrentVer DisplayString
}
cmmSysCpldIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Value represents CPLD Index."
::= { cmmSysCpldEntry 1 }
cmmSysCpldName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPLD Name.
Blank indicates unavailable"
::= { cmmSysCpldEntry 2 }
cmmSysCpldSupportedVer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPLD supported version on board.
Blank indicates unavailable"
::= { cmmSysCpldEntry 3 }
cmmSysCpldCurrentVer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPLD current version on board.
Blank indicates unavailable"
::= { cmmSysCpldEntry 4 }
-- ## DDMPage20h21h Entry
cmmTransDDMPage20h21hTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmTransDDMPage20h21hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about Digital Optical Monitoring for page 20 and 21."
::= { cmmSysObjects 20 }
cmmTransDDMPage20h21hEntry OBJECT-TYPE
SYNTAX CmmTransDDMPage20h21hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about Digital Optical Monitoring for page 20 and 21."
INDEX { cmmStackUnitIndex,
cmmTransIndex,
cmmTransChannelIndex
}
::= { cmmTransDDMPage20h21hTable 1 }
CmmTransDDMPage20h21hEntry ::=
SEQUENCE {
cmmTransPreFecBerVal ErrorFigures,
cmmTransPreFecBerCriticMin ErrorFigures,
cmmTransPreFecBerCriticMax ErrorFigures,
cmmTransPreFecBerCriticalMin ErrorFigures,
cmmTransPreFecBerCriticalMax ErrorFigures,
cmmTransUncorrectedBerVal ErrorFigures,
cmmTransUncorrectedBerValCriticMin ErrorFigures,
cmmTransUncorrectedBerValCriticMax ErrorFigures,
cmmTransUncorrectedBerValCriticalMin ErrorFigures,
cmmTransUncorrectedBerValCriticalMax ErrorFigures,
cmmTransSnrVal INTEGER,
cmmTransSnrCriticMin INTEGER,
cmmTransSnrCriticMax INTEGER,
cmmTransSnrCriticalMin INTEGER,
cmmTransSnrCriticalMax INTEGER,
cmmTransResIsiVal INTEGER,
cmmTransResIsiCriticMin INTEGER,
cmmTransResIsiCriticMax INTEGER,
cmmTransResIsiCriticalMin INTEGER,
cmmTransResIsiCriticalMax INTEGER,
cmmTransLvlTransVal INTEGER,
cmmTransLvlTransCriticMin INTEGER,
cmmTransLvlTransCriticMax INTEGER,
cmmTransLvlTransCriticalMin INTEGER,
cmmTransLvlTransCriticalMax INTEGER,
cmmTransTecCurrErrVal INTEGER,
cmmTransTecCurrErrCriticMin INTEGER,
cmmTransTecCurrErrCriticMax INTEGER,
cmmTransTecCurrErrCriticalMin INTEGER,
cmmTransTecCurrErrCriticalMax INTEGER,
cmmTransLaserTempVal INTEGER,
cmmTransLaserTempCriticMin INTEGER,
cmmTransLaserTempCriticMax INTEGER,
cmmTransLaserTempCriticalMin INTEGER,
cmmTransLaserTempCriticalMax INTEGER
}
cmmTransPreFecBerVal OBJECT-TYPE
SYNTAX ErrorFigures
UNITS "BER"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Forward error correction bit error rate value.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 1 }
cmmTransPreFecBerCriticMin OBJECT-TYPE
SYNTAX ErrorFigures
UNITS "BER"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min alert value for pre-forward error correction ber.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 2 }
cmmTransPreFecBerCriticMax OBJECT-TYPE
SYNTAX ErrorFigures
UNITS "BER"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max alert value for pre-forward error correction ber
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 3}
cmmTransPreFecBerCriticalMin OBJECT-TYPE
SYNTAX ErrorFigures
UNITS "BER"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min critical value for pre-forward error correction ber.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 4 }
cmmTransPreFecBerCriticalMax OBJECT-TYPE
SYNTAX ErrorFigures
UNITS "BER"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max critical value for pre-forward error correction ber.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 5 }
cmmTransUncorrectedBerVal OBJECT-TYPE
SYNTAX ErrorFigures
UNITS "BER"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame error rate value.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 6 }
cmmTransUncorrectedBerValCriticMin OBJECT-TYPE
SYNTAX ErrorFigures
UNITS "BER"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min alert value for Frame error rate.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 7 }
cmmTransUncorrectedBerValCriticMax OBJECT-TYPE
SYNTAX ErrorFigures
UNITS "BER"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max alert value for Frame error rate.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 8 }
cmmTransUncorrectedBerValCriticalMin OBJECT-TYPE
SYNTAX ErrorFigures
UNITS "BER"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min critical value for Frame error rate.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 9}
cmmTransUncorrectedBerValCriticalMax OBJECT-TYPE
SYNTAX ErrorFigures
UNITS "BER"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max critical value for Frame error rate.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 10}
cmmTransSnrVal OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signal to noise ratio on ingress lane.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 11 }
cmmTransSnrCriticMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min alert value for signal-to-noise ratio on ingress lane.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 12 }
cmmTransSnrCriticMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max alert value for signal-to-noise ratio on ingress lane.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 13 }
cmmTransSnrCriticalMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min critical value for signal-to-noise ratio on ingress lane.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 14 }
cmmTransSnrCriticalMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max critical value for signal-to-noise ratio on ingress lane.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 15 }
cmmTransResIsiVal OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual-isi value.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 16 }
cmmTransResIsiCriticMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min alert value for residual-isi.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 17 }
cmmTransResIsiCriticMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max alert value for residual-isi.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 18 }
cmmTransResIsiCriticalMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min critical value for residual-isi.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 19 }
cmmTransResIsiCriticalMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max critical value for residual-isi.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 20 }
cmmTransLvlTransVal OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Level transition value.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 21 }
cmmTransLvlTransCriticMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min alert value for level transition.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 22 }
cmmTransLvlTransCriticMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max alert value for level transition.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 23 }
cmmTransLvlTransCriticalMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min critical value for level transition.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 24 }
cmmTransLvlTransCriticalMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max critical value for level transition.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 25 }
cmmTransTecCurrErrVal OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Thermo-elecrical cooler current value.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 26 }
cmmTransTecCurrErrCriticMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min alert value for thermo-elecrical cooler current.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 27 }
cmmTransTecCurrErrCriticMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max alert value for thermo-elecrical cooler current.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 28 }
cmmTransTecCurrErrCriticalMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min critical value for thermo-elecrical cooler current.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 29 }
cmmTransTecCurrErrCriticalMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max critical value for thermo-elecrical cooler current.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 30 }
cmmTransLaserTempVal OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Laser Temparature value.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 31 }
cmmTransLaserTempCriticMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min alert value for Laser Temperature.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 32 }
cmmTransLaserTempCriticMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max alert value for Laser Temperature.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 33 }
cmmTransLaserTempCriticalMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min critical value for Laser Temperature.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 34 }
cmmTransLaserTempCriticalMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max critical value for Laser Temperature.
'-100002' indicates not-applicable."
::= { cmmTransDDMPage20h21hEntry 35 }
-- ## Hard disk Partition Table
cmmSysHardDiskPartitionTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysHardDiskPartitionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Hard disk information of the mounted partitions."
::= { cmmSysObjects 21 }
cmmSysHardDiskPartitionEntry OBJECT-TYPE
SYNTAX CmmSysHardDiskPartitionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Hard disk mounted information of the mounted partitions."
INDEX { cmmStackUnitIndex, cmmSysHardDiskPartitionIndex }
::= { cmmSysHardDiskPartitionTable 1 }
CmmSysHardDiskPartitionEntry ::=
SEQUENCE {
cmmSysHardDiskPartitionIndex INTEGER,
cmmSysHardDiskPartitionName DisplayString,
cmmSysHardDiskPartitionTotalMem INTEGER,
cmmSysHardDiskPartitionUsedMem INTEGER,
cmmSysHardDiskPartitionFreeMem INTEGER
}
cmmSysHardDiskPartitionIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mounted partition index."
::= { cmmSysHardDiskPartitionEntry 1 }
cmmSysHardDiskPartitionName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mounted partition name.
Blank indicates unavailable"
::= { cmmSysHardDiskPartitionEntry 2 }
cmmSysHardDiskPartitionTotalMem OBJECT-TYPE
SYNTAX INTEGER
UNITS " MBytes "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mounted partition size.
'-100001' indicates unavailable"
::= { cmmSysHardDiskPartitionEntry 3 }
cmmSysHardDiskPartitionUsedMem OBJECT-TYPE
SYNTAX INTEGER
UNITS " MBytes "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mounted partition used space.
'-100001' indicates unavailable"
::= { cmmSysHardDiskPartitionEntry 4 }
cmmSysHardDiskPartitionFreeMem OBJECT-TYPE
SYNTAX INTEGER
UNITS " MBytes "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mounted partition free space.
'-100001' indicates unavailable"
::= { cmmSysHardDiskPartitionEntry 5 }
--
-- ## Notifications
--
cmmAlarmVariable OBJECT IDENTIFIER ::= { cmmAlarmObjects 0 }
cmmAlarmMibNotifications OBJECT IDENTIFIER ::= { cmmAlarmObjects 1 }
cmmTransMibNotifications OBJECT IDENTIFIER ::= { cmmAlarmObjects 2 }
cmmAlarmVarInteger OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"An generic INTEGER value in the TRAP object"
::= { cmmAlarmVariable 1 }
cmmAlarmVarString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"An generic string value in the TRAP object"
::= { cmmAlarmVariable 2 }
--
-- SYSTEM RELATED TRAPS
--
cmmCpuLoad15MinAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackCpuLoad15minAlertThreshold,
cmmStackUnitCpuLoad15Min
}
STATUS current
DESCRIPTION
"Trap to send information for 15min alert threshold and
CPU Utilisation"
::= { cmmAlarmMibNotifications 1 }
cmmCpuLoad5MinAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackCpuLoad5minAlertThreshold,
cmmStackUnitCpuLoad5Min
}
STATUS current
DESCRIPTION
"Trap to send information for 5min alert threshold and
CPU Utilisation"
::= { cmmAlarmMibNotifications 2 }
cmmCpuLoad1MinCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackCpuLoad1minCriticalThreshold,
cmmStackUnitCpuLoad1Min
}
STATUS current
DESCRIPTION
"Trap to send information for 1min critical level threshold and
CPU Utilisation"
::= { cmmAlarmMibNotifications 3 }
cmmCpuLoad1MinAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackCpuLoad1minAlertThreshold,
cmmStackUnitCpuLoad1Min
}
STATUS current
DESCRIPTION
"Trap to send information for 1min alert level threshold and
CPU Utilisation"
::= { cmmAlarmMibNotifications 4 }
cmmCpuLoad1MinCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackCpuLoad1minCriticalThreshold,
cmmStackUnitCpuLoad1Min
}
STATUS current
DESCRIPTION
"Trap to send information for CPU usage recovered from Critical Condition"
::= { cmmAlarmMibNotifications 5 }
cmmCpuLoad15MinAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackCpuLoad15minAlertThreshold,
cmmStackUnitCpuLoad15Min
}
STATUS current
DESCRIPTION
"Trap to send information for CPU usage recovered from 15 min Alert Condition"
::= { cmmAlarmMibNotifications 6 }
cmmCpuLoad5MinAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackCpuLoad5minAlertThreshold,
cmmStackUnitCpuLoad5Min
}
STATUS current
DESCRIPTION
"Trap to send information for CPU usage recovered from 5 min Alert Condition"
::= { cmmAlarmMibNotifications 7 }
cmmCpuLoad1MinAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackCpuLoad1minAlertThreshold,
cmmStackUnitCpuLoad1Min
}
STATUS current
DESCRIPTION
"Trap to send information for CPU usage recovered from 15 min Alert Condition"
::= { cmmAlarmMibNotifications 8 }
cmmCpuCoreUtilHighCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackUnitCpuUtilCriticalThreshold,
cmmStackUnitCpuUtilization
}
STATUS current
DESCRIPTION
"Trap to send information for CPU utilization in critical condition."
::= { cmmAlarmMibNotifications 9 }
cmmCpuCoreUtilHighAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackUnitCpuUtilAlertThreshold,
cmmStackUnitCpuUtilization
}
STATUS current
DESCRIPTION
"Trap to send information for CPU utilization in alert condition."
::= { cmmAlarmMibNotifications 10 }
cmmCpuCoreUtilHighCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackUnitCpuUtilization
}
STATUS current
DESCRIPTION
"Trap to send information for CPU utilization after critical recovery."
::= { cmmAlarmMibNotifications 11 }
cmmCpuCoreUtilHighAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackUnitCpuUtilization
}
STATUS current
DESCRIPTION
"Trap to send information for CPU utilization after alert recovery."
::= { cmmAlarmMibNotifications 12 }
cmmRamUsageRisingCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysRamUsedMem,
cmmSysRamCriticalThreshold
}
STATUS current
DESCRIPTION
"Trap to send when RAM usage exceeds Critical Threshold"
::= { cmmAlarmMibNotifications 21 }
cmmRamUsageRisingAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysRamUsedMem,
cmmSysRamAlertThreshold
}
STATUS current
DESCRIPTION
"Trap to send when RAM usage exceeds Alert Threshold"
::= { cmmAlarmMibNotifications 22 }
cmmRamUsageCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysRamUsedMem,
cmmSysRamCriticalThreshold
}
STATUS current
DESCRIPTION
"Trap to send when RAM usage recovers from Critical Condition"
::= { cmmAlarmMibNotifications 23 }
cmmRamUsageAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysRamUsedMem,
cmmSysRamAlertThreshold
}
STATUS current
DESCRIPTION
"Trap to send when RAM usage recovers under Alert threshold."
::= { cmmAlarmMibNotifications 24 }
cmmHardDiskUsageRisingCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHarddiskUsedMem,
cmmSysHarddiskUsageCriticalThreshold
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk usage exceeds critical threshold."
::= { cmmAlarmMibNotifications 25 }
cmmHardDiskUsageRisingAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHarddiskUsedMem,
cmmSysHarddiskUsageAlertThreshold
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk usage exceeds alert threshold."
::= { cmmAlarmMibNotifications 26 }
cmmHardDiskUsageCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHarddiskUsedMem,
cmmSysHarddiskUsageCriticalThreshold
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk usage recovers under critical threshold."
::= { cmmAlarmMibNotifications 27 }
cmmHardDiskUsageAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHarddiskUsedMem,
cmmSysHarddiskUsageAlertThreshold
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk usage recovers under alert threshold."
::= { cmmAlarmMibNotifications 28 }
cmmSysHardDiskRemainLifeRisingAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHardDiskRemainLife,
cmmSysHardDiskRemainLifeAlertThreshold
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk Remain life reached below the Alert threshold."
::= { cmmAlarmMibNotifications 29 }
cmmSysHardDiskRemainLifeRisingCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHardDiskRemainLife,
cmmSysHardDiskRemainLifeCriticalThreshold
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk Remain life reached below the Critical threshold."
::= { cmmAlarmMibNotifications 30 }
cmmSysHardDiskAvailableReservedSpaceAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHardDiskAvailableReservedSpace,
cmmSysHardDiskAvailableReservedSpaceAlertThreshold
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk Available Reserved Space reached below the Alert threshold."
::= { cmmAlarmMibNotifications 31 }
cmmSysHardDiskAvailableReservedSpaceCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHardDiskAvailableReservedSpace,
cmmSysHardDiskAvailableReservedSpaceCriticalThreshold
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk Available Reserved Space reached below the Critical threshold."
::= { cmmAlarmMibNotifications 32 }
cmmSysHardDiskReallocSectorsCountAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHardDiskReallocSectorsCount
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk Realloced sector count increments by 10."
::= { cmmAlarmMibNotifications 33 }
cmmSysHardDiskUncorrectableSectorCountCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHardDiskUncorrectSectorCount
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk Uncorrectable sector count increments by 1."
::= { cmmAlarmMibNotifications 34 }
cmmSysHardDiskActivityMonitoringReadAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHardDiskActivityMonitoringRead,
cmmSysHardDiskActivityMonitoringReadThreshold
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk activity violates read threshold."
::= { cmmAlarmMibNotifications 35 }
cmmSysHardDiskActivityMonitoringReadRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHardDiskActivityMonitoringRead,
cmmSysHardDiskActivityMonitoringReadThreshold
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk read activity violation recovers."
::= { cmmAlarmMibNotifications 36 }
cmmSysHardDiskActivityMonitoringWriteAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHardDiskActivityMonitoringWrite,
cmmSysHardDiskActivityMonitoringWriteThreshold
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk activity violates write threshold."
::= { cmmAlarmMibNotifications 37 }
cmmSysHardDiskActivityMonitoringWriteRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHardDiskActivityMonitoringWrite,
cmmSysHardDiskActivityMonitoringWriteThreshold
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk write activity violation recovers."
::= { cmmAlarmMibNotifications 38 }
cmmSysHardDiskStorageStatusNotification NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHardDiskStorageStatus
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk Storage Status (EOL) Change"
::= { cmmAlarmMibNotifications 39 }
cmmTemperatureLowEmergency NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempEmergencyThresholdMin,
cmmSysTempEmergencyThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature will be below lower threshold for sensor"
::= { cmmAlarmMibNotifications 41 }
cmmTemperatureHighEmergency NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempEmergencyThresholdMin,
cmmSysTempEmergencyThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature will be above threshold for sensor"
::= { cmmAlarmMibNotifications 42 }
cmmTemperatureLowCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempCriticalThresholdMin,
cmmSysTempCriticalThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature is nearing low emergency condition for sensor"
::= { cmmAlarmMibNotifications 43 }
cmmTemperatureHighCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempCriticalThresholdMin,
cmmSysTempCriticalThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature is nearing high emergency condition for sensor"
::= { cmmAlarmMibNotifications 44 }
cmmTemperatureLowAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempAlertThresholdMin,
cmmSysTempAlertThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature has reached low alert condition for sensor"
::= { cmmAlarmMibNotifications 45 }
cmmTemperatureHighAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempAlertThresholdMin,
cmmSysTempAlertThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature has reached high alert condition for sensor"
::= { cmmAlarmMibNotifications 46 }
cmmTemperatureHighCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempCriticalThresholdMin,
cmmSysTempCriticalThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature is recovered to normal range from critical level high for sensor"
::= { cmmAlarmMibNotifications 47 }
cmmTemperatureLowCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempCriticalThresholdMin,
cmmSysTempCriticalThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature is recovered to normal range from critical level low for sensor"
::= { cmmAlarmMibNotifications 48 }
cmmTemperatureHighAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempAlertThresholdMin,
cmmSysTempAlertThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature is recovered to normal range from alert level high for sensor"
::= { cmmAlarmMibNotifications 49 }
cmmTemperatureLowAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempAlertThresholdMin,
cmmSysTempAlertThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature is recovered to normal range from alert level low for sensor"
::= { cmmAlarmMibNotifications 50 }
cmmPsuInsertedNotify NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPowerSupplyOperStatus,
cmmPsuSerialNumber
}
STATUS current
DESCRIPTION
"Set when Power supply unit is inserted"
::= { cmmAlarmMibNotifications 61 }
cmmPsuRemovedCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPowerSupplyOperStatus,
cmmPsuSerialNumber
}
STATUS current
DESCRIPTION
"Set when Power supply unit is Removed"
::= { cmmAlarmMibNotifications 62 }
cmmPsuAcFailedCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex
}
STATUS current
DESCRIPTION
"Set when Power supply unit has no input power"
::= { cmmAlarmMibNotifications 63 }
cmmPsuAcRecover NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex
}
STATUS current
DESCRIPTION
"Set when Power supply unit input is restored"
::= { cmmAlarmMibNotifications 64 }
cmmPsu12vPgFailedCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex
}
STATUS current
DESCRIPTION
"Set when Power supply unit has no output power"
::= { cmmAlarmMibNotifications 65 }
cmmPsu12vPgRecover NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex
}
STATUS current
DESCRIPTION
"Set when Power supply unit has restored output"
::= { cmmAlarmMibNotifications 66 }
cmmSysPSUInputVoltageHighAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputVoltage,
cmmSysInputVoltageAlertThresholdMin,
cmmSysInputVoltageAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input voltage reached high alert threshold value."
::= { cmmAlarmMibNotifications 67 }
cmmSysPSUInputVoltageLowAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputVoltage,
cmmSysInputVoltageAlertThresholdMin,
cmmSysInputVoltageAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input voltage reached low alert threshold value."
::= { cmmAlarmMibNotifications 68 }
cmmSysPSUInputVoltageHighCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputVoltage,
cmmSysInputVoltageCriticalThresholdMin,
cmmSysInputVoltageCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input voltage reached high critical threshold value."
::= { cmmAlarmMibNotifications 69 }
cmmSysPSUInputVoltageLowCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputVoltage,
cmmSysInputVoltageCriticalThresholdMin,
cmmSysInputVoltageCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input power reached low alert threshold value."
::= { cmmAlarmMibNotifications 70 }
cmmSysPSUInputVoltageHighAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputVoltage,
cmmSysInputVoltageAlertThresholdMin,
cmmSysInputVoltageAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input voltage is recovered from high alert threshold."
::= { cmmAlarmMibNotifications 71 }
cmmSysPSUInputVoltageLowAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputVoltage,
cmmSysInputVoltageAlertThresholdMin,
cmmSysInputVoltageAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input voltage is recovered from low alert threshold."
::= { cmmAlarmMibNotifications 72 }
cmmSysPSUInputVoltageHighCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputVoltage,
cmmSysInputVoltageCriticalThresholdMin,
cmmSysInputVoltageCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input voltage is recovered from high critical threshold."
::= { cmmAlarmMibNotifications 73 }
cmmSysPSUInputVoltageLowCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputVoltage,
cmmSysInputVoltageCriticalThresholdMin,
cmmSysInputVoltageCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input power is recovered from low alert threshold."
::= { cmmAlarmMibNotifications 74 }
cmmSysPSUOutputVoltageHighAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysOutputVoltage,
cmmSysOutputVoltageAlertThresholdMin,
cmmSysOutputVoltageAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output voltage reached high alert threshold value."
::= { cmmAlarmMibNotifications 75 }
cmmSysPSUOutputVoltageLowAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysOutputVoltage,
cmmSysOutputVoltageAlertThresholdMin,
cmmSysOutputVoltageAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output voltage reached low alert threshold value."
::= { cmmAlarmMibNotifications 76 }
cmmSysPSUOutputVoltageHighCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysOutputVoltage,
cmmSysOutputVoltageCriticalThresholdMin,
cmmSysOutputVoltageCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output voltage reached high critical threshold value."
::= { cmmAlarmMibNotifications 77 }
cmmSysPSUOutputVoltageLowCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysOutputVoltage,
cmmSysOutputVoltageCriticalThresholdMin,
cmmSysOutputVoltageCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output voltage reached low critical threshold value."
::= { cmmAlarmMibNotifications 78 }
cmmSysPSUOutputVoltageHighAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysOutputVoltage,
cmmSysOutputVoltageAlertThresholdMin,
cmmSysOutputVoltageAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output voltage recovered from high alert threshold."
::= { cmmAlarmMibNotifications 79 }
cmmSysPSUOutputVoltageLowAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysOutputVoltage,
cmmSysOutputVoltageAlertThresholdMin,
cmmSysOutputVoltageAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output voltage recovered from low alert threshold."
::= { cmmAlarmMibNotifications 80 }
cmmSysPSUOutputVoltageHighCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysOutputVoltage,
cmmSysOutputVoltageCriticalThresholdMin,
cmmSysOutputVoltageCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output voltage recovered from high critical threshold."
::= { cmmAlarmMibNotifications 81 }
cmmSysPSUOutputVoltageLowCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysOutputVoltage,
cmmSysOutputVoltageCriticalThresholdMin,
cmmSysOutputVoltageCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output voltage recovered from low critical threshold."
::= { cmmAlarmMibNotifications 82 }
cmmSysPSUInputPowerHighAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputPower,
cmmSysInputPowerAlertThresholdMin,
cmmSysInputPowerAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input power reached high alert threshold value."
::= { cmmAlarmMibNotifications 83 }
cmmSysPSUInputPowerLowAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputPower,
cmmSysInputPowerAlertThresholdMin,
cmmSysInputPowerAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input power reached low alert threshold value."
::= { cmmAlarmMibNotifications 84 }
cmmSysPSUInputPowerHighCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputPower,
cmmSysInputPowerCriticalThresholdMin,
cmmSysInputPowerCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input power reached high critical threshold value."
::= { cmmAlarmMibNotifications 85 }
cmmSysPSUInputPowerLowCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputPower,
cmmSysInputPowerCriticalThresholdMin,
cmmSysInputPowerCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input power reached low critical threshold value."
::= { cmmAlarmMibNotifications 86 }
cmmSysPSUInputPowerHighAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputPower,
cmmSysInputPowerAlertThresholdMin,
cmmSysInputPowerAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input power recovered from high alert threshold."
::= { cmmAlarmMibNotifications 87 }
cmmSysPSUInputPowerLowAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputPower,
cmmSysInputPowerAlertThresholdMin,
cmmSysInputPowerAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input power recovered from low alert threshold."
::= { cmmAlarmMibNotifications 88 }
cmmSysPSUInputPowerHighCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputPower,
cmmSysInputPowerCriticalThresholdMin,
cmmSysInputPowerCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input power recovered from high critical threshold."
::= { cmmAlarmMibNotifications 89 }
cmmSysPSUInputPowerLowCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputPower,
cmmSysInputPowerCriticalThresholdMin,
cmmSysInputPowerCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input power recovered from low critical threshold."
::= { cmmAlarmMibNotifications 90 }
cmmSysPSUOutputPowerHighAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSConsumption,
cmmSysPSConsumptionAlertThresholdMin,
cmmSysPSConsumptionAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output power reached high alert threshold value."
::= { cmmAlarmMibNotifications 91 }
cmmSysPSUOutputPowerLowAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSConsumption,
cmmSysPSConsumptionAlertThresholdMin,
cmmSysPSConsumptionAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output power reached low alert threshold value."
::= { cmmAlarmMibNotifications 92 }
cmmSysPSUOutputPowerHighCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSConsumption,
cmmSysPSConsumptionCriticalThresholdMin,
cmmSysPSConsumptionCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output power reached high critical threshold value."
::= { cmmAlarmMibNotifications 93 }
cmmSysPSUOutputPowerLowCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSConsumption,
cmmSysPSConsumptionCriticalThresholdMin,
cmmSysPSConsumptionCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output power reached low critical threshold value."
::= { cmmAlarmMibNotifications 94 }
cmmSysPSUOutputPowerHighAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSConsumption,
cmmSysPSConsumptionAlertThresholdMin,
cmmSysPSConsumptionAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output power recovered from high alert threshold."
::= { cmmAlarmMibNotifications 95 }
cmmSysPSUOutputPowerLowAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSConsumption,
cmmSysPSConsumptionAlertThresholdMin,
cmmSysPSConsumptionAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output power recovered from low alert threshold."
::= { cmmAlarmMibNotifications 96 }
cmmSysPSUOutputPowerHighCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSConsumption,
cmmSysPSConsumptionCriticalThresholdMin,
cmmSysPSConsumptionCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output power recovered from high critical threshold."
::= { cmmAlarmMibNotifications 97 }
cmmSysPSUOutputPowerLowCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSConsumption,
cmmSysPSConsumptionCriticalThresholdMin,
cmmSysPSConsumptionCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output power recovered from low critical threshold."
::= { cmmAlarmMibNotifications 98 }
cmmSysPSUInputCurrentHighAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputCurrent,
cmmSysInputCurrentAlertThresholdMin,
cmmSysInputCurrentAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input current reached high alert threshold value."
::= { cmmAlarmMibNotifications 99 }
cmmSysPSUInputCurrentLowAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputCurrent,
cmmSysInputCurrentAlertThresholdMin,
cmmSysInputCurrentAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input current reached low alert threshold value."
::= { cmmAlarmMibNotifications 100 }
cmmSysPSUInputCurrentHighCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputCurrent,
cmmSysInputCurrentCriticalThresholdMin,
cmmSysInputCurrentCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input current reached high critical threshold value."
::= { cmmAlarmMibNotifications 101 }
cmmSysPSUInputCurrentLowCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputCurrent,
cmmSysInputCurrentCriticalThresholdMin,
cmmSysInputCurrentCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input current reached low critical threshold value."
::= { cmmAlarmMibNotifications 102 }
cmmSysPSUInputCurrentHighAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputCurrent,
cmmSysInputCurrentAlertThresholdMin,
cmmSysInputCurrentAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input current recovered from high alert threshold."
::= { cmmAlarmMibNotifications 103 }
cmmSysPSUInputCurrentLowAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputCurrent,
cmmSysInputCurrentAlertThresholdMin,
cmmSysInputCurrentAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input current recovered from low alert threshold."
::= { cmmAlarmMibNotifications 104 }
cmmSysPSUInputCurrentHighCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputCurrent,
cmmSysInputCurrentCriticalThresholdMin,
cmmSysInputCurrentCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input current recovered from high critical threshold."
::= { cmmAlarmMibNotifications 105 }
cmmSysPSUInputCurrentLowCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysInputCurrent,
cmmSysInputCurrentCriticalThresholdMin,
cmmSysInputCurrentCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU input current recovered from low critical threshold."
::= { cmmAlarmMibNotifications 106 }
cmmSysPSUOutputCurrentHighAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysOutputCurrent,
cmmSysOutputCurrentAlertThresholdMin,
cmmSysOutputCurrentAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output current reached high alert threshold value."
::= { cmmAlarmMibNotifications 107 }
cmmSysPSUOutputCurrentLowAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysOutputCurrent,
cmmSysOutputCurrentAlertThresholdMin,
cmmSysOutputCurrentAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output current reached low alert threshold value."
::= { cmmAlarmMibNotifications 108 }
cmmSysPSUOutputCurrentHighCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysOutputCurrent,
cmmSysOutputCurrentCriticalThresholdMin,
cmmSysOutputCurrentCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output current reached high critical threshold value."
::= { cmmAlarmMibNotifications 109 }
cmmSysPSUOutputCurrentLowCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysOutputCurrent,
cmmSysOutputCurrentCriticalThresholdMin,
cmmSysOutputCurrentCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output current reached low critical threshold value."
::= { cmmAlarmMibNotifications 110 }
cmmSysPSUOutputCurrentHighAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysOutputCurrent,
cmmSysOutputCurrentAlertThresholdMin,
cmmSysOutputCurrentAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output current recovered from high alert threshold."
::= { cmmAlarmMibNotifications 111 }
cmmSysPSUOutputCurrentLowAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysOutputCurrent,
cmmSysOutputCurrentAlertThresholdMin,
cmmSysOutputCurrentAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output current recovered from low alert threshold."
::= { cmmAlarmMibNotifications 112 }
cmmSysPSUOutputCurrentHighCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysOutputCurrent,
cmmSysOutputCurrentCriticalThresholdMin,
cmmSysOutputCurrentCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output current recovered from high critical threshold."
::= { cmmAlarmMibNotifications 113 }
cmmSysPSUOutputCurrentLowCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysOutputCurrent,
cmmSysOutputCurrentCriticalThresholdMin,
cmmSysOutputCurrentCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU output current recovered from low critical threshold."
::= { cmmAlarmMibNotifications 114 }
cmmSysPSUTemperature1HighAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature1,
cmmSysPSTemperature1AlertThresholdMin,
cmmSysPSTemperature1AlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature1 reached high alert threshold value."
::= { cmmAlarmMibNotifications 115 }
cmmSysPSUTemperature1LowAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature1,
cmmSysPSTemperature1AlertThresholdMin,
cmmSysPSTemperature1AlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature1 reached low alert threshold value."
::= { cmmAlarmMibNotifications 116 }
cmmSysPSUTemperature1HighCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature1,
cmmSysPSTemperature1CriticalThresholdMin,
cmmSysPSTemperature1CriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature1 reached high critical threshold value."
::= { cmmAlarmMibNotifications 117 }
cmmSysPSUTemperature1LowCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature1,
cmmSysPSTemperature1CriticalThresholdMin,
cmmSysPSTemperature1CriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature1 reached low critical threshold value."
::= { cmmAlarmMibNotifications 118 }
cmmSysPSUTemperature1HighAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature1,
cmmSysPSTemperature1AlertThresholdMin,
cmmSysPSTemperature1AlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature1 recovered from high alert threshold."
::= { cmmAlarmMibNotifications 119 }
cmmSysPSUTemperature1LowAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature1,
cmmSysPSTemperature1AlertThresholdMin,
cmmSysPSTemperature1AlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature1 recovered from low alert threshold."
::= { cmmAlarmMibNotifications 120 }
cmmSysPSUTemperature1HighCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature1,
cmmSysPSTemperature1CriticalThresholdMin,
cmmSysPSTemperature1CriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature1 recovered from high critical threshold."
::= { cmmAlarmMibNotifications 121 }
cmmSysPSUTemperature1LowCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature1,
cmmSysPSTemperature1CriticalThresholdMin,
cmmSysPSTemperature1CriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature1 recovered from low critical threshold."
::= { cmmAlarmMibNotifications 122 }
cmmSysPSUTemperature2HighAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature2,
cmmSysPSTemperature2AlertThresholdMin,
cmmSysPSTemperature2AlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature2 reached high alert threshold value."
::= { cmmAlarmMibNotifications 123 }
cmmSysPSUTemperature2LowAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature2,
cmmSysPSTemperature2AlertThresholdMin,
cmmSysPSTemperature2AlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature2 reached low alert threshold value."
::= { cmmAlarmMibNotifications 124 }
cmmSysPSUTemperature2HighCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature2,
cmmSysPSTemperature2CriticalThresholdMin,
cmmSysPSTemperature2CriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature2 reached high critical threshold value."
::= { cmmAlarmMibNotifications 125 }
cmmSysPSUTemperature2LowCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature2,
cmmSysPSTemperature2CriticalThresholdMin,
cmmSysPSTemperature2CriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature2 reached low critical threshold value."
::= { cmmAlarmMibNotifications 126 }
cmmSysPSUTemperature2HighAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature2,
cmmSysPSTemperature2AlertThresholdMin,
cmmSysPSTemperature2AlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature2 recovered from high alert threshold."
::= { cmmAlarmMibNotifications 127 }
cmmSysPSUTemperature2LowAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature2,
cmmSysPSTemperature2AlertThresholdMin,
cmmSysPSTemperature2AlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature2 recovered from low alert threshold."
::= { cmmAlarmMibNotifications 128 }
cmmSysPSUTemperature2HighCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature2,
cmmSysPSTemperature2CriticalThresholdMin,
cmmSysPSTemperature2CriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature2 recovered from high critical threshold."
::= { cmmAlarmMibNotifications 129 }
cmmSysPSUTemperature2LowCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature2,
cmmSysPSTemperature2CriticalThresholdMin,
cmmSysPSTemperature2CriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature2 recovered from low critical threshold."
::= { cmmAlarmMibNotifications 130 }
cmmSysPSUTemperature3HighAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature3,
cmmSysPSTemperature3AlertThresholdMin,
cmmSysPSTemperature3AlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperaturer3 reached high alert threshold value."
::= { cmmAlarmMibNotifications 131 }
cmmSysPSUTemperature3LowAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature3,
cmmSysPSTemperature3AlertThresholdMin,
cmmSysPSTemperature3AlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature3 reached low alert threshold value."
::= { cmmAlarmMibNotifications 132 }
cmmSysPSUTemperature3HighCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature3,
cmmSysPSTemperature3CriticalThresholdMin,
cmmSysPSTemperature3CriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature3 reached high critical threshold value."
::= { cmmAlarmMibNotifications 133 }
cmmSysPSUTemperature3LowCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature3,
cmmSysPSTemperature3CriticalThresholdMin,
cmmSysPSTemperature3CriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature3 reached low critical threshold value."
::= { cmmAlarmMibNotifications 134 }
cmmSysPSUTemperature3HighAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature3,
cmmSysPSTemperature3AlertThresholdMin,
cmmSysPSTemperature3AlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature3 recovered from high alert threshold."
::= { cmmAlarmMibNotifications 135 }
cmmSysPSUTemperature3LowAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature3,
cmmSysPSTemperature3AlertThresholdMin,
cmmSysPSTemperature3AlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature3 recovered from low alert threshold."
::= { cmmAlarmMibNotifications 136 }
cmmSysPSUTemperature3HighCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature3,
cmmSysPSTemperature3CriticalThresholdMin,
cmmSysPSTemperature3CriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature3 recovered from high critical threshold."
::= { cmmAlarmMibNotifications 137 }
cmmSysPSUTemperature3LowCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPSTemperature3,
cmmSysPSTemperature3CriticalThresholdMin,
cmmSysPSTemperature3CriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when PSU temperature3 recovered from low critical threshold."
::= { cmmAlarmMibNotifications 138 }
cmmFanTrayInsertedNotify NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanSerialNumber
}
STATUS current
DESCRIPTION
"Set when fan tray is inserted"
::= { cmmAlarmMibNotifications 141 }
cmmFanTrayRemovedCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanSerialNumber
}
STATUS current
DESCRIPTION
"Set when fan tray is Removed"
::= { cmmAlarmMibNotifications 142 }
cmmFanTrayFaultyCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanIndex
}
STATUS current
DESCRIPTION
"Set when Given Fan Tray Faulty."
::= { cmmAlarmMibNotifications 143 }
cmmFanTrayRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanIndex
}
STATUS current
DESCRIPTION
"Set when Given Fan Tray is recovered."
::= { cmmAlarmMibNotifications 144 }
cmmFanTrayStallCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanIndex
}
STATUS current
DESCRIPTION
"Set when Given Fan Tray Stalled."
::= { cmmAlarmMibNotifications 145 }
cmmFanTrayStallRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanIndex
}
STATUS current
DESCRIPTION
"Set when Given Fan Tray is recovered from stall."
::= { cmmAlarmMibNotifications 146 }
cmmFanRPMMinNotify NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanIndex,
cmmFanRpmMin
}
STATUS obsolete
DESCRIPTION
"Set when fan RPM set to its minimum value."
::= { cmmAlarmMibNotifications 147 }
cmmFanRPMMaxCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanIndex,
cmmFanRpmMax
}
STATUS current
DESCRIPTION
"Set when fan RPM set to its maximum value."
::= { cmmAlarmMibNotifications 148 }
cmmFanRPMDecreasedNotify NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanIndex,
cmmFanRpm
}
STATUS current
DESCRIPTION
"Set when fan RPM decreased from previous RPM"
::= { cmmAlarmMibNotifications 149 }
cmmFanRPMIncreasedNotify NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanIndex,
cmmFanRpm
}
STATUS current
DESCRIPTION
"Set when fan RPM increased from previous RPM"
::= { cmmAlarmMibNotifications 150 }
cmmCriticalIncompatibleTransceiverPresence NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex
}
STATUS current
DESCRIPTION
"Set when Incompatible Trasceiver is Present"
::= { cmmTransMibNotifications 54}
cmmNotifyIncompatibleTransceiverRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex
}
STATUS current
DESCRIPTION
"Set when Incompatible Trasceiver is Removed"
::= { cmmTransMibNotifications 55}
--
-- TRANSCEIVER(DDM) RELATED TRAPS
--
cmmTransAlertTempHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransTemperature,
cmmTransTempAlertThresholdMin,
cmmTransTempAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when internal temperature of transceiver exceeds high alarm level."
::= { cmmTransMibNotifications 1}
cmmTransAlertTempLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransTemperature,
cmmTransTempAlertThresholdMin,
cmmTransTempAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when internal temperature of transceiver is below low alarm level."
::= { cmmTransMibNotifications 2}
cmmTransCriticalTempHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransTemperature,
cmmTransTempCriticalThresholdMin,
cmmTransTempCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when internal temperature of transceiver exceeds high Critical level."
::= { cmmTransMibNotifications 3}
cmmTransCriticalTempLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransTemperature,
cmmTransTempCriticalThresholdMin,
cmmTransTempCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when internal temperature of transceiver is below low Critical level"
::= { cmmTransMibNotifications 4}
cmmTransNotifyTransceiverTempRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransTemperature
}
STATUS current
DESCRIPTION
"Set when Trasceiver is recovered from temperature fault."
::= { cmmTransMibNotifications 5}
cmmTransAlertVoltageHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransVoltage,
cmmTransVoltAlertThresholdMin,
cmmTransVoltAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when internal supply voltage of transceiver exceeds high alarm level."
::= { cmmTransMibNotifications 11}
cmmTransAlertVoltageLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransVoltage,
cmmTransVoltAlertThresholdMin,
cmmTransVoltAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when internal supply voltage of transceiver is below low alarm level."
::= { cmmTransMibNotifications 12}
cmmTransCriticalVoltageHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransVoltage,
cmmTransVoltCriticalThresholdMin,
cmmTransVoltCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when internal supply voltage of transceiver exceeds high Critical level."
::= { cmmTransMibNotifications 13}
cmmTransCriticalVoltageLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransVoltage,
cmmTransVoltCriticalThresholdMin,
cmmTransVoltCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when internal supply voltage of transceiver is below low Critical level"
::= { cmmTransMibNotifications 14}
cmmTransNotifyTransceiverVoltRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransVoltage
}
STATUS current
DESCRIPTION
"Set when Trasceiver is recovered from voltage fault."
::= { cmmTransMibNotifications 15}
cmmTransAlertBiasHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLaserBiasCurrent,
cmmTransLaserBiasCurrAlertThresholdMin,
cmmTransLaserBiasCurrAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when TX Bias current of transceiver exceeds high alarm level."
::= { cmmTransMibNotifications 21}
cmmTransAlertBiasLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLaserBiasCurrent,
cmmTransLaserBiasCurrAlertThresholdMin,
cmmTransLaserBiasCurrAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when TX Bias current of transceiver is below low alarm level."
::= { cmmTransMibNotifications 22 }
cmmTransCriticalBiashigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLaserBiasCurrent,
cmmTransLaserBiasCurrCriticalThresholdMin,
cmmTransLaserBiasCurrCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when TX Bias current of transceiver exceeds high Critical level."
::= { cmmTransMibNotifications 23}
cmmTransCriticalBiasLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLaserBiasCurrent,
cmmTransLaserBiasCurrCriticalThresholdMin,
cmmTransLaserBiasCurrCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when TX Bias current of transceiver is below low Critical level."
::= { cmmTransMibNotifications 24}
cmmTransNotifyTransceiverBiasRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLaserBiasCurrent
}
STATUS current
DESCRIPTION
"Set when Trasceiver is recovered from Bias current fault."
::= { cmmTransMibNotifications 25}
cmmTransAlertRxPowerHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransRxPower,
cmmTransRxPowerAlertThresholdMin,
cmmTransRxPowerAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when Received Power of transceiver exceeds high alarm level."
::= { cmmTransMibNotifications 31}
cmmTransAlertRxPowerLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransRxPower,
cmmTransRxPowerAlertThresholdMin,
cmmTransRxPowerAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when Received Power of transceiver is below low alarm level."
::= { cmmTransMibNotifications 32}
cmmTransCriticalRxPowerHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransRxPower,
cmmTransRxPowerCriticalThresholdMin,
cmmTransRxPowerCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when Received Power of transceiver exceeds high Critical level."
::= { cmmTransMibNotifications 33}
cmmTransCriticalRxPowerLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransRxPower,
cmmTransRxPowerCriticalThresholdMin,
cmmTransRxPowerCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when Received Power of transceiver is below low Critical level."
::= { cmmTransMibNotifications 34}
cmmTransNotifyTransceiverRxPowRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransRxPower
}
STATUS current
DESCRIPTION
"Set when Trasceiver is recovered from Rx power fault."
::= { cmmTransMibNotifications 35}
cmmTransAlertTxPowerHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransTxPower,
cmmTransTxPowerAlertThresholdMin,
cmmTransTxPowerAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when Transferred Power of transceiver exceeds high alarm level."
::= { cmmTransMibNotifications 41}
cmmTransAlertTxPowerLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransTxPower,
cmmTransTxPowerAlertThresholdMin,
cmmTransTxPowerAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when Transferred Power of transceiver is below low alarm level."
::= { cmmTransMibNotifications 42}
cmmTransCriticalTxPowerHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransTxPower,
cmmTransTxPowerCriticalThresholdMin,
cmmTransTxPowerCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when Transferred Power of transceiver exceeds high Critical level."
::= { cmmTransMibNotifications 43}
cmmTransCriticalTxPowerLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransTxPower,
cmmTransTxPowerCriticalThresholdMin,
cmmTransTxPowerCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when Transferred Power of transceiver is below low Critical level."
::= { cmmTransMibNotifications 44}
cmmTransNotifyTransceiverTxPowRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransTxPower
}
STATUS current
DESCRIPTION
"Set when Trasceiver is recovered from Tx Power fault."
::= { cmmTransMibNotifications 45}
cmmTransNotifyTransceiverInserted NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransVendorName,
cmmTransVendorSerialNumber,
cmmTransconnectortype
}
STATUS current
DESCRIPTION
"Set when Trasceiver is inserted."
::= { cmmTransMibNotifications 51}
cmmTransCriticalTransceiverRemoved NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransVendorName,
cmmTransVendorSerialNumber,
cmmTransconnectortype
}
STATUS current
DESCRIPTION
"Set when Trasceiver is removed."
::= { cmmTransMibNotifications 52}
cmmTransCriticalFaultyTransceiverInserted NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType
}
STATUS current
DESCRIPTION
"Set when Trasceiver is inserted and failed to read transceiver EEPROM information."
::= { cmmTransMibNotifications 53}
cmmTransXFPAlertVoltage2High NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransXFPVoltage2,
cmmTransXFPVolt2AlertThresholdMin,
cmmTransXFPVolt2AlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when the volatge of the second available supply of the XFP transceiver exceeds the high warning level."
::= { cmmTransMibNotifications 61}
cmmTransXFPAlertVoltage2Low NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransXFPVoltage2,
cmmTransXFPVolt2AlertThresholdMin,
cmmTransXFPVolt2AlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when the volatge of the second available supply of the XFP transceiver is below the low warning level."
::= { cmmTransMibNotifications 62}
cmmTransXFPCriticalVoltage2High NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransXFPVoltage2,
cmmTransXFPVolt2CriticalThresholdMin,
cmmTransXFPVolt2CriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when the volatge of the second available supply of the XFP transceiver exceeds the high critical level."
::= { cmmTransMibNotifications 63}
cmmTransXFPCriticalVoltage2Low NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransXFPVoltage2,
cmmTransXFPVolt2CriticalThresholdMin,
cmmTransXFPVolt2CriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when the volatge of the second available supply of the XFP transceiver is below the low critical level"
::= { cmmTransMibNotifications 64}
cmmTransNotifyTransceiverXFPVolt2Recovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransXFPVoltage2
}
STATUS current
DESCRIPTION
"Set when the volatge of the second available supply of the XFP transceiver is recovered from the voltage fault."
::= { cmmTransMibNotifications 65}
cmmTransFrequencyErrorHighAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransFrequencyError,
cmmTransFrequencyErrorAlertThresholdMin,
cmmTransFrequencyErrorAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when Frequency error of transceiver exceeds high alert level."
::= { cmmTransMibNotifications 66 }
cmmTransFrequencyErrorLowAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransFrequencyError,
cmmTransFrequencyErrorAlertThresholdMin,
cmmTransFrequencyErrorAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when Frequency error of transceiver is below low alert level."
::= { cmmTransMibNotifications 67 }
cmmTransFrequencyErrorHighCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransFrequencyError,
cmmTransFrequencyErrorCriticalThresholdMin,
cmmTransFrequencyErrorCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when Frequency error of transceiver exceeds high critical level."
::= { cmmTransMibNotifications 68 }
cmmTransFrequencyErrorLowCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransFrequencyError,
cmmTransFrequencyErrorCriticalThresholdMin,
cmmTransFrequencyErrorCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when Frequency error of transceiver is below low critical level."
::= { cmmTransMibNotifications 69 }
cmmTransFrequencyErrorRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransFrequencyError
}
STATUS current
DESCRIPTION
"Set when Frequency error is recovered to normal range."
::= { cmmTransMibNotifications 70 }
cmmTransWavelengthErrorHighAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransWavelengthError,
cmmTransWavelengthErrorAlertThresholdMin,
cmmTransWavelengthErrorAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when Wavelength error of transceiver exceeds high alert level."
::= { cmmTransMibNotifications 71 }
cmmTransWavelengthErrorLowAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransWavelengthError,
cmmTransWavelengthErrorAlertThresholdMin,
cmmTransWavelengthErrorAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when Wavelength error of transceiver is below low alert level."
::= { cmmTransMibNotifications 72 }
cmmTransWavelengthErrorHighCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransWavelengthError,
cmmTransWavelengthErrorCriticalThresholdMin,
cmmTransWavelengthErrorCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when Wavelength error of transceiver exceeds high critical level."
::= { cmmTransMibNotifications 73 }
cmmTransWavelengthErrorLowCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransWavelengthError,
cmmTransWavelengthErrorCriticalThresholdMin,
cmmTransWavelengthErrorCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when Wavelength error of transceiver is below low critical level."
::= { cmmTransMibNotifications 74 }
cmmTransWavelengthErrorRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransWavelengthError
}
STATUS current
DESCRIPTION
"Set when Wavelength error is recovered to normal range."
::= { cmmTransMibNotifications 75 }
cmmTransTECFaultCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType
}
STATUS current
DESCRIPTION
"Set when TEC Fault has occurred on the transceiver."
::= { cmmTransMibNotifications 76 }
cmmTransTECFaultRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType
}
STATUS current
DESCRIPTION
"Set when the transceiver has recovered from TEC Fault."
::= { cmmTransMibNotifications 77 }
cmmTransAlertPreFecBerErrHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransPreFecBerVal,
cmmTransPreFecBerCriticMin,
cmmTransPreFecBerCriticMax
}
STATUS current
DESCRIPTION
"Notification sent when FEC bit error rate falls above alert max value."
::= { cmmTransMibNotifications 81}
cmmTransAlertPreFecBerErrLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransPreFecBerVal,
cmmTransPreFecBerCriticMin,
cmmTransPreFecBerCriticMax
}
STATUS current
DESCRIPTION
"Notification sent when FEC bit error rate falls below alert min value."
::= { cmmTransMibNotifications 82}
cmmTransCriticalPreFecBerErrHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransPreFecBerVal,
cmmTransPreFecBerCriticalMin,
cmmTransPreFecBerCriticalMax
}
STATUS current
DESCRIPTION
"Notification sent when FEC bit error rate falls above critical max value."
::= { cmmTransMibNotifications 83}
cmmTransCriticalPreFecBerErrLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransPreFecBerVal,
cmmTransPreFecBerCriticalMin,
cmmTransPreFecBerCriticalMax
}
STATUS current
DESCRIPTION
"Notification sent when FEC bit error rate falls below critical min value."
::= { cmmTransMibNotifications 84}
cmmTransNotifyTransceiverPreFecBerRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransPreFecBerVal
}
STATUS current
DESCRIPTION
"Set when FEC bit error rate of transceiver is recovered from BER fault."
::= { cmmTransMibNotifications 85}
cmmTransAlertUncorrectedBerHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransUncorrectedBerVal,
cmmTransUncorrectedBerValCriticMin,
cmmTransUncorrectedBerValCriticMax
}
STATUS current
DESCRIPTION
"Notification sent when Frame Error Rate falls above alert max value."
::= { cmmTransMibNotifications 91}
cmmTransAlertUncorrectedBerLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransUncorrectedBerVal,
cmmTransUncorrectedBerValCriticMin,
cmmTransUncorrectedBerValCriticMax
}
STATUS current
DESCRIPTION
"Notification sent when Frame Error Rate falls below alert min value."
::= { cmmTransMibNotifications 92}
cmmTransCriticalUncorrectedBerHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransUncorrectedBerVal,
cmmTransUncorrectedBerValCriticalMin,
cmmTransUncorrectedBerValCriticalMax
}
STATUS current
DESCRIPTION
"Notification sent when Frame Error Rate falls above critical max value."
::= { cmmTransMibNotifications 93}
cmmTransCriticalUncorrectedBerLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransUncorrectedBerVal,
cmmTransUncorrectedBerValCriticalMin,
cmmTransUncorrectedBerValCriticalMax
}
STATUS current
DESCRIPTION
"Notification sent when Frame Error Rate falls below critical min value."
::= { cmmTransMibNotifications 94}
cmmTransNotifyTransceiverUncorrectedBerRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransUncorrectedBerVal
}
STATUS current
DESCRIPTION
"Set when Frame Error Rate transceiver is recovered from uncorrected BER fault."
::= { cmmTransMibNotifications 95}
cmmTransAlertSnrHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransSnrVal,
cmmTransSnrCriticMin,
cmmTransSnrCriticMax
}
STATUS current
DESCRIPTION
"Notification sent when SNR falls above alert max value."
::= { cmmTransMibNotifications 101}
cmmTransAlertSnrLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransSnrVal,
cmmTransSnrCriticMin,
cmmTransSnrCriticMax
}
STATUS current
DESCRIPTION
"Notification sent when SNR falls below alert min value."
::= { cmmTransMibNotifications 102}
cmmTransCriticalSnrHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransSnrVal,
cmmTransSnrCriticalMin,
cmmTransSnrCriticalMax
}
STATUS current
DESCRIPTION
"Notification sent when SNR falls above critical max value."
::= { cmmTransMibNotifications 103}
cmmTransCriticalSnrLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransSnrVal,
cmmTransSnrCriticalMin,
cmmTransSnrCriticalMax
}
STATUS current
DESCRIPTION
"Notification sent when SNR falls below critical min value."
::= { cmmTransMibNotifications 104}
cmmTransNotifyTransceiverSnrRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransSnrVal
}
STATUS current
DESCRIPTION
"Set when SNR of transceiver is recovered from SNR fault."
::= { cmmTransMibNotifications 105}
cmmTransAlertresIsiHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransResIsiVal,
cmmTransResIsiCriticMin,
cmmTransResIsiCriticMax
}
STATUS current
DESCRIPTION
"Notification sent when residual-isi falls above alert max value."
::= { cmmTransMibNotifications 111}
cmmTransAlertresIsiLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransResIsiVal,
cmmTransResIsiCriticMin,
cmmTransResIsiCriticMax
}
STATUS current
DESCRIPTION
"Notification sent when residual-isi falls below alert min value."
::= { cmmTransMibNotifications 112}
cmmTransCriticalResIsiHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransResIsiVal,
cmmTransResIsiCriticalMin,
cmmTransResIsiCriticalMax
}
STATUS current
DESCRIPTION
"Notification sent when residual-isi falls above critical max value."
::= { cmmTransMibNotifications 113}
cmmTransCriticalResIsiLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransResIsiVal,
cmmTransResIsiCriticalMin,
cmmTransResIsiCriticalMax
}
STATUS current
DESCRIPTION
"Notification sent when residual-isi falls below critical min value."
::= { cmmTransMibNotifications 114}
cmmTransNotifyTransceiverResIsiRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransResIsiVal
}
STATUS current
DESCRIPTION
"Set when residual-isi of transceiver is recovered from residual-isi fault."
::= { cmmTransMibNotifications 115}
cmmTransAlertLvlTranHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLvlTransVal,
cmmTransLvlTransCriticMin,
cmmTransLvlTransCriticMax
}
STATUS current
DESCRIPTION
"Notification sent when level transition falls above alert max value."
::= { cmmTransMibNotifications 121}
cmmTransAlertLvlTranLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLvlTransVal,
cmmTransLvlTransCriticMin,
cmmTransLvlTransCriticMax
}
STATUS current
DESCRIPTION
"Notification sent when level transition falls below alert min value."
::= { cmmTransMibNotifications 122}
cmmTransCriticalLvlTranHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLvlTransVal,
cmmTransLvlTransCriticalMin,
cmmTransLvlTransCriticalMax
}
STATUS current
DESCRIPTION
"Notification sent when level transition falls above critical max value."
::= { cmmTransMibNotifications 123}
cmmTransCriticalLvlTranLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLvlTransVal,
cmmTransLvlTransCriticalMin,
cmmTransLvlTransCriticalMax
}
STATUS current
DESCRIPTION
"Notification sent when level transition falls below critical min value."
::= { cmmTransMibNotifications 124}
cmmTransNotifyTransceiverLvlTranRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLvlTransVal
}
STATUS current
DESCRIPTION
"Set when level transition of transceiver is recovered from level transition fault."
::= { cmmTransMibNotifications 125}
cmmTransAlertTecCurrErrHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransTecCurrErrVal,
cmmTransTecCurrErrCriticMin,
cmmTransTecCurrErrCriticMax
}
STATUS current
DESCRIPTION
"Notification sent when thermo-electric cooler current falls above alert max value."
::= { cmmTransMibNotifications 131}
cmmTransAlertTecCurrErrLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransTecCurrErrVal,
cmmTransTecCurrErrCriticMin,
cmmTransTecCurrErrCriticMax
}
STATUS current
DESCRIPTION
"Notification sent when thermo-electric cooler current falls below alert min value."
::= { cmmTransMibNotifications 132}
cmmTransCriticalTecCurrErrHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransTecCurrErrVal,
cmmTransTecCurrErrCriticalMin,
cmmTransTecCurrErrCriticalMax
}
STATUS current
DESCRIPTION
"Notification sent when thermo-electric cooler current falls above critical max value."
::= { cmmTransMibNotifications 133}
cmmTransCriticalTecCurrErrLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransTecCurrErrVal,
cmmTransTecCurrErrCriticalMin,
cmmTransTecCurrErrCriticalMax
}
STATUS current
DESCRIPTION
"Notification sent when thermo-electric cooler current falls below critical min value."
::= { cmmTransMibNotifications 134}
cmmTransNotifyTransceiverTecCurrErrRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransTecCurrErrVal
}
STATUS current
DESCRIPTION
"Set when thermo-electric cooler current of transceiver is recovered thermo-electric cooler current fault."
::= { cmmTransMibNotifications 135}
cmmTransAlertLaserTempValHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLaserTempVal,
cmmTransLaserTempCriticMin,
cmmTransLaserTempCriticMax
}
STATUS current
DESCRIPTION
"Notification sent when laser temperature falls above crictical max value."
::= { cmmTransMibNotifications 141}
cmmTransAlertLaserTempValLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLaserTempVal,
cmmTransLaserTempCriticMin,
cmmTransLaserTempCriticMax
}
STATUS current
DESCRIPTION
"Notification sent when laser temperature falls below alert min value."
::= { cmmTransMibNotifications 142}
cmmTransCriticalLaserTempValHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLaserTempVal,
cmmTransLaserTempCriticalMin,
cmmTransLaserTempCriticalMax
}
STATUS current
DESCRIPTION
"Notification sent when laser temperature falls above critical max value."
::= { cmmTransMibNotifications 143}
cmmTransCriticalLaserTempValLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLaserTempVal,
cmmTransLaserTempCriticalMin,
cmmTransLaserTempCriticalMax
}
STATUS current
DESCRIPTION
"Notification sent when laser temperature falls below critical min value."
::= { cmmTransMibNotifications 144}
cmmTransNotifyTransceiverLaserTempRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLaserTempVal
}
STATUS current
DESCRIPTION
"Set when laser temperature of transceiver is recovered from temperature fault."
::= { cmmTransMibNotifications 145}
cmmTranAlertTransceiverPortRxLoss NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex
}
STATUS current
DESCRIPTION
"Set when RX_LOSS is detected on transceiver ports"
::= { cmmTransMibNotifications 146}
cmmTransNotifyTransceiverPortRxLossRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex
}
STATUS current
DESCRIPTION
"Set when RX_LOSS is recovered on transceiver ports"
::= { cmmTransMibNotifications 147}
END
Reference in New Issue View Git Blame Copy Permalink