mirror of
https://github.com/librenms/librenms.git
synced 2024-09-21 10:28:13 +00:00
1815 lines
64 KiB
Plaintext
1815 lines
64 KiB
Plaintext
-- extracted from draft-ietf-ppvpn-mpls-vpn-mib-05.txt
|
|
-- at Fri May 14 06:21:04 2004
|
|
|
|
MPLS-VPN-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
experimental, Integer32, Counter32, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
TEXTUAL-CONVENTION, TruthValue, RowStatus, StorageType,
|
|
TimeStamp, DisplayString
|
|
FROM SNMPv2-TC
|
|
|
|
InterfaceIndex, InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
|
|
VPNId
|
|
FROM PPVPN-TC-MIB
|
|
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
|
|
InetAddress, InetAddressType
|
|
FROM INET-ADDRESS-MIB
|
|
|
|
bgp4PathAttrIpAddrPrefix, bgp4PathAttrIpAddrPrefixLen,
|
|
bgp4PathAttrPeer
|
|
FROM BGP4-MIB;
|
|
|
|
mplsVpnMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200210311200Z" -- 31 October 2002 12:00:00 GMT
|
|
ORGANIZATION "Provider Provisioned Virtual Private
|
|
Networks Working Group."
|
|
CONTACT-INFO
|
|
" Thomas D. Nadeau
|
|
tnadeau@cisco.com
|
|
|
|
Luyuan Fang
|
|
luyuanfang@att.com
|
|
|
|
Stephen Brannon
|
|
|
|
Fabio M. Chiussi
|
|
fabio@bell-labs.com
|
|
|
|
Joseph Dube
|
|
jdube@avici.com
|
|
|
|
Martin Tatham
|
|
martin.tatham@bt.com
|
|
|
|
Harmen van der Linde
|
|
hvdl@att.com
|
|
|
|
Comments and discussion to ppvpn@ietf.org"
|
|
|
|
DESCRIPTION
|
|
"This MIB contains managed object definitions for the
|
|
Multiprotocol Label Switching (MPLS)/Border Gateway
|
|
Protocol (BGP) Virtual Private Networks (VPNs) as
|
|
defined in : Rosen, E., Viswanathan, A., and R.
|
|
Callon, Multiprotocol Label Switching Architecture,
|
|
RFC3031, January 2001."
|
|
|
|
-- Revision history.
|
|
REVISION "200210311200Z" -- 31 October 2002 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Added Intellectual Property Considerations section.
|
|
|
|
Added new mplsNumVrfRouteMaxThreshCleared notification.
|
|
"
|
|
|
|
REVISION "200102281200Z" -- 28 February 2002 12:00:00 GMT
|
|
DESCRIPTION
|
|
"mplsVpnVrfRouteIfIndex changed to InterfaceIndexOrZero.
|
|
|
|
mplsVpnIfVpnRouteDistProtocol BITS changed to start at 0.
|
|
|
|
Changed notifications to not include indexes. Those indexes'
|
|
MAX-ACESS changed to not-accessible.
|
|
|
|
Fixed description of mplsVpnIfLabelEdgeType and
|
|
mplsVpnVrfConfLastChanged.
|
|
"
|
|
|
|
REVISION "200201261200Z" -- 26 January 2002 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Removed indexes from notifications.
|
|
|
|
Changed mplsVpnVrfRouteTos to not-accessible as it is
|
|
used as an index."
|
|
|
|
REVISION "200111131200Z" -- 13 November 2001 12:00:00 GMT
|
|
DESCRIPTION
|
|
"MPLS PPVPN MIB now assigned IANA experimental 118.
|
|
|
|
Changed mplsVpnVrfRouteTarget from not-accessible
|
|
to read-create.
|
|
"
|
|
|
|
REVISION "200110151200Z" -- 15 October 2001 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Fixed compilation errors from last version.
|
|
|
|
Changed mplsVpnIfVpnRouteDistProtocol to be a BITS
|
|
structure to allow more than one to be selected.
|
|
|
|
Changed mplsIfDown -> mplsVrfIfDown
|
|
Changed mplsIfUp -> mplsVrfIfUp
|
|
"
|
|
|
|
REVISION
|
|
"200110051200Z" -- 05 October 2001 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Added integer index and removed route distinguisher index
|
|
from mplsVpnVrfRouteTargetTable.
|
|
|
|
Removed mplsVpn ifType; simply use mpls(166) ifType for
|
|
MPLS VPN-enabled interfaces instead.
|
|
|
|
Removed interface and protocol-related objects from
|
|
mplsVpnVrfTable.
|
|
|
|
Moved mplsVpnVrfConfMaxPossibleRoutes from
|
|
mplsVpnVrfTable to scalar object.
|
|
|
|
Removed mplsVpnActiveVrfInterfaces scalar object.
|
|
Removed mplsVpnVrfUpTime object from mplsVpnVrfTable.
|
|
|
|
Added MplsVpnVrfBgpNbrPrefixTable providing a linkage with
|
|
the bgp4PathAttrTable of the BGPv4 MIB."
|
|
|
|
REVISION
|
|
"200107171200Z" -- 17 July 2001 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Removed mplsVpnVrfRouteTargetImport/Export from route target
|
|
table, and modified indexing to better reflect N <> R
|
|
distribution policy. Also added new object called
|
|
mplsVpnVrfRouteTargetType which denotes import/export
|
|
policy for the specified route target.
|
|
|
|
Added mplsVpnIfConfRowStatus which allows for
|
|
an interface to be associated with a VPN through SNMP
|
|
configuration.
|
|
|
|
Added VrfName to index of VrfInterfaceConfEntry which allows
|
|
interfaces to be associated with the appropriate VRF.
|
|
|
|
Modified description of mplsVpnVrfConfMaxPossibleRoutes and
|
|
mplsVpnVrfConfMaxRoutes to allow for undetermined value.
|
|
|
|
Removed 'both' enumerated value in mplsVpnVrfBgpNbrRole.
|
|
|
|
Updated example to reflect these changes."
|
|
|
|
REVISION
|
|
"200107101200Z" -- 10 July 2001 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Renamed mplsNumVrfSecViolationThreshExceeded to
|
|
mplsNumVrfSecIllglLblThrshExcd, and removed
|
|
mplsVpnIfConfIndex from varbind.
|
|
Changed MplsVpnId TC from SnmpAdminString to OCTET STRING.
|
|
|
|
Added mplsVpnVrfSecIllegalLblRcvThrsh to
|
|
mplsVpnVrfSecEntry.
|
|
|
|
Changed duplicate mplsVpnVrfRouteTargetImport in
|
|
mplsVpnVrfRouteTargetEntry INDEX to
|
|
mplsVpnVrfRouteTargetExport."
|
|
|
|
REVISION
|
|
"200106191200Z" -- 19 June 2001 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Fixed several compile errors."
|
|
|
|
REVISION
|
|
"200105301200Z" -- 30 May 2001 12:00:00 EST
|
|
DESCRIPTION
|
|
"Updated most of document and MIB to reflect comments from WG."
|
|
|
|
REVISION
|
|
"200009301200Z" -- 30 September 2000 12:00:00 EST
|
|
DESCRIPTION
|
|
"Initial draft version."
|
|
::= { experimental 118 } -- assigned by IANA
|
|
|
|
-- Textual Conventions.
|
|
|
|
MplsVpnName ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An identifier that is assigned to each MPLS/BGP VPN and
|
|
is used to uniquely identify it. This is assigned by the
|
|
system operator or NMS and SHOULD be unique throughout
|
|
the MPLS domain. If this is the case, then this identifier
|
|
can then be used at any LSR within a specific MPLS domain
|
|
to identify this MPLS/BGP VPN. It may also be possible to
|
|
preserve the uniqueness of this identifier across MPLS
|
|
domain boundaries, in which case this identifier can then
|
|
be used to uniquely identify MPLS/BGP VPNs on a more global
|
|
basis. This object MAY be set to the VPN ID as defined in
|
|
RFC 2685."
|
|
REFERENCE
|
|
"RFC 2685 [VPN-RFC2685] Fox B., et al, 'Virtual Private
|
|
Networks Identifier', September 1999."
|
|
SYNTAX OCTET STRING(SIZE (0..31))
|
|
|
|
MplsVpnRouteDistinguisher ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Syntax for a route distinguisher and route target."
|
|
SYNTAX OCTET STRING(SIZE (0..256))
|
|
|
|
|
|
-- Top level components of this MIB.
|
|
mplsVpnNotifications OBJECT IDENTIFIER ::= { mplsVpnMIB 0 }
|
|
mplsVpnObjects OBJECT IDENTIFIER ::= { mplsVpnMIB 1 }
|
|
mplsVpnScalars OBJECT IDENTIFIER ::= { mplsVpnObjects 1 }
|
|
mplsVpnConf OBJECT IDENTIFIER ::= { mplsVpnObjects 2 }
|
|
mplsVpnPerf OBJECT IDENTIFIER ::= { mplsVpnObjects 3 }
|
|
mplsVpnRoute OBJECT IDENTIFIER ::= { mplsVpnObjects 4 }
|
|
mplsVpnConformance OBJECT IDENTIFIER ::= { mplsVpnMIB 3 }
|
|
|
|
--
|
|
-- Scalar Objects
|
|
--
|
|
mplsVpnConfiguredVrfs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of VRFs which are configured on this node."
|
|
::= { mplsVpnScalars 1 }
|
|
|
|
mplsVpnActiveVrfs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of VRFs which are active on this node.
|
|
That is, those VRFs whose corresponding mplsVpnVrfOperStatus
|
|
object value is equal to operational (1)."
|
|
::= { mplsVpnScalars 2 }
|
|
|
|
mplsVpnConnectedInterfaces OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of interfaces connected to a VRF."
|
|
::= { mplsVpnScalars 3 }
|
|
|
|
mplsVpnNotificationEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this object is true, then it enables the
|
|
generation of all notifications defined in
|
|
this MIB."
|
|
DEFVAL { false }
|
|
::= { mplsVpnScalars 4 }
|
|
|
|
mplsVpnVrfConfMaxPossibleRoutes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes maximum number of routes which the device
|
|
will allow all VRFs jointly to hold. If this value is
|
|
set to 0, this indicates that the device is
|
|
unable to determine the absolute maximum. In this
|
|
case, the configured maximum MAY not actually
|
|
be allowed by the device."
|
|
::= { mplsVpnScalars 5 }
|
|
|
|
mplsVpnVrfConfRouteMaxThreshTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the interval in seconds, at which the route max threshold
|
|
notification will be re-issued after the maximum value has been exceeded
|
|
(or has been reached if mplsVpnVrfConfMaxRoutes and
|
|
mplsVpnVrfConfHighRouteThreshold are equal) and the initial
|
|
notification has been issued. This value is intended to prevent continuous
|
|
generation of notifications by an agent in the event that routes are
|
|
continually added to a VRF after it has reached its maximum value. The
|
|
default value is 10 minutes (600 seconds). If this value is set to 0, the agent
|
|
should only issue a single notification at the time that the maxium threshold
|
|
has been reached, and should not issue any more notifications until the value
|
|
of routes has fallen below the configured threshold value."
|
|
DEFVAL { 600 }
|
|
::= { mplsVpnScalars 6 }
|
|
|
|
-- VPN Interface Configuration Table
|
|
|
|
mplsVpnIfConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnIfConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-interface MPLS capability
|
|
and associated information."
|
|
::= { mplsVpnConf 1 }
|
|
|
|
mplsVpnIfConfEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnIfConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for
|
|
every interface capable of supporting MPLS/BGP VPN.
|
|
Each entry in this table is meant to correspond to
|
|
an entry in the Interfaces Table."
|
|
INDEX { mplsVpnVrfName, mplsVpnIfConfIndex }
|
|
::= { mplsVpnIfConfTable 1 }
|
|
|
|
MplsVpnIfConfEntry ::= SEQUENCE {
|
|
mplsVpnIfConfIndex InterfaceIndex,
|
|
mplsVpnIfLabelEdgeType INTEGER,
|
|
mplsVpnIfVpnClassification INTEGER,
|
|
mplsVpnIfVpnRouteDistProtocol BITS,
|
|
mplsVpnIfConfStorageType StorageType,
|
|
mplsVpnIfConfRowStatus RowStatus
|
|
}
|
|
|
|
mplsVpnIfConfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a unique index for an entry in the
|
|
MplsVPNInterfaceConfTable. A non-zero index for an
|
|
entry indicates the ifIndex for the corresponding
|
|
interface entry in the MPLS-VPN-layer in the ifTable.
|
|
Note that this table does not necessarily correspond
|
|
one-to-one with all entries in the Interface MIB
|
|
having an ifType of MPLS-layer; rather, only those
|
|
which are enabled for MPLS/BGP VPN functionality."
|
|
REFERENCE
|
|
"RFC 2233 - The Interfaces Group MIB using SMIv2,
|
|
McCloghrie, K., and F. Kastenholtz, Nov. 1997"
|
|
::= { mplsVpnIfConfEntry 1 }
|
|
|
|
mplsVpnIfLabelEdgeType OBJECT-TYPE
|
|
SYNTAX INTEGER { providerEdge (1),
|
|
customerEdge (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Either the providerEdge(0) (PE) or customerEdge(1)
|
|
(CE) bit MUST be set."
|
|
::= { mplsVpnIfConfEntry 2 }
|
|
|
|
mplsVpnIfVpnClassification OBJECT-TYPE
|
|
SYNTAX INTEGER { carrierOfCarrier (1),
|
|
enterprise (2),
|
|
interProvider (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes whether this link participates in a
|
|
carrier-of-carrier's, enterprise, or inter-provider
|
|
scenario."
|
|
::= { mplsVpnIfConfEntry 3 }
|
|
|
|
mplsVpnIfVpnRouteDistProtocol OBJECT-TYPE
|
|
SYNTAX BITS { none (0),
|
|
bgp (1),
|
|
ospf (2),
|
|
rip(3),
|
|
isis(4),
|
|
other (5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the route distribution protocol across the
|
|
PE-CE link. Note that more than one routing protocol
|
|
may be enabled at the same time."
|
|
::= { mplsVpnIfConfEntry 4 }
|
|
|
|
mplsVpnIfConfStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this entry."
|
|
::= { mplsVpnIfConfEntry 5 }
|
|
|
|
mplsVpnIfConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status for this entry. This value is
|
|
used to create a row in this table, signifying
|
|
that the specified interface is to be associated
|
|
with the specified interface. If this operation
|
|
succeeds, the interface will have been associated,
|
|
otherwise the agent would not allow the association.
|
|
If the agent only allows read-only operations on
|
|
this table, it will create entries in this table
|
|
as they are created."
|
|
::= { mplsVpnIfConfEntry 6 }
|
|
|
|
-- VRF Configuration Table
|
|
|
|
mplsVpnVrfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-interface MPLS/BGP VPN
|
|
VRF Table capability and associated information.
|
|
Entries in this table define VRF routing instances
|
|
associated with MPLS/VPN interfaces. Note that
|
|
multiple interfaces can belong to the same VRF
|
|
instance. The collection of all VRF instances
|
|
comprises an actual VPN."
|
|
::= { mplsVpnConf 2 }
|
|
|
|
mplsVpnVrfEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for
|
|
every VRF capable of supporting MPLS/BGP VPN. The
|
|
indexing provides an ordering of VRFs per-VPN
|
|
interface."
|
|
INDEX { mplsVpnVrfName }
|
|
::= { mplsVpnVrfTable 1 }
|
|
|
|
MplsVpnVrfEntry ::= SEQUENCE {
|
|
mplsVpnVrfName MplsVpnName,
|
|
mplsVpnVrfVpnId VPNId,
|
|
mplsVpnVrfDescription SnmpAdminString,
|
|
mplsVpnVrfRouteDistinguisher MplsVpnRouteDistinguisher,
|
|
mplsVpnVrfCreationTime TimeStamp,
|
|
mplsVpnVrfOperStatus INTEGER,
|
|
mplsVpnVrfActiveInterfaces Unsigned32,
|
|
mplsVpnVrfAssociatedInterfaces Unsigned32,
|
|
mplsVpnVrfConfMidRouteThreshold Unsigned32,
|
|
mplsVpnVrfConfHighRouteThreshold Unsigned32,
|
|
mplsVpnVrfConfMaxRoutes Unsigned32,
|
|
mplsVpnVrfConfLastChanged TimeStamp,
|
|
mplsVpnVrfConfRowStatus RowStatus,
|
|
mplsVpnVrfConfStorageType StorageType
|
|
}
|
|
|
|
mplsVpnVrfName OBJECT-TYPE
|
|
SYNTAX MplsVpnName
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The human-readable name of this VPN. This MAY
|
|
be equivalent to the RFC2685 VPN-ID, but may
|
|
also vary. If it is set to the VPN ID, it MUST
|
|
be equivalent to the value of mplsVpnVrfVpnId.
|
|
It is strongly recommended that all sites supporting
|
|
VRFs that are part of the same VPN use the same
|
|
naming convention for VRFs as well as the same VPN
|
|
ID."
|
|
|
|
REFERENCE
|
|
"RFC 2685 [VPN-RFC2685] Fox B., et al, `Virtual
|
|
Private Networks Identifier`, September 1999."
|
|
::= { mplsVpnVrfEntry 1 }
|
|
|
|
mplsVpnVrfVpnId OBJECT-TYPE
|
|
SYNTAX VPNId
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VPN ID as specified in RFC 2685. If a VPN ID
|
|
as not been specified for this VRF, then this variable
|
|
SHOULD be set to an empty string."
|
|
::= { mplsVpnVrfEntry 2 }
|
|
|
|
mplsVpnVrfDescription OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The human-readable description of this VRF."
|
|
::= { mplsVpnVrfEntry 3 }
|
|
|
|
mplsVpnVrfRouteDistinguisher OBJECT-TYPE
|
|
SYNTAX MplsVpnRouteDistinguisher
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route distinguisher for this VRF."
|
|
::= { mplsVpnVrfEntry 4 }
|
|
|
|
mplsVpnVrfCreationTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which this VRF entry was created."
|
|
::= { mplsVpnVrfEntry 5 }
|
|
|
|
mplsVpnVrfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { up (1),
|
|
down (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes whether a VRF is operational or not. A VRF is
|
|
up(1) when at least one interface associated with the
|
|
VRF, which ifOperStatus is up(1). A VRF is down(2) when:
|
|
|
|
a. There does not exist at least one interface whose
|
|
ifOperStatus is up(1).
|
|
|
|
b. There are no interfaces associated with the VRF."
|
|
::= { mplsVpnVrfEntry 6 }
|
|
|
|
mplsVpnVrfActiveInterfaces OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of interfaces connected to this VRF with
|
|
ifOperStatus = up(1).
|
|
|
|
This counter should be incremented when:
|
|
|
|
a. When the ifOperStatus of one of the connected interfaces
|
|
changes from down(2) to up(1).
|
|
|
|
b. When an interface with ifOperStatus = up(1) is connected
|
|
to this VRF.
|
|
|
|
This counter should be decremented when:
|
|
|
|
a. When the ifOperStatus of one of the connected interfaces
|
|
changes from up(1) to down(2).
|
|
|
|
b. When one of the connected interfaces with
|
|
ifOperStatus = up(1) gets disconnected from this VRF."
|
|
::= { mplsVpnVrfEntry 7 }
|
|
|
|
mplsVpnVrfAssociatedInterfaces OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of interfaces connected to this VRF
|
|
(independent of ifOperStatus type)."
|
|
::= { mplsVpnVrfEntry 8 }
|
|
|
|
mplsVpnVrfConfMidRouteThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes mid-level water marker for the number
|
|
of routes which this VRF may hold."
|
|
::= { mplsVpnVrfEntry 9 }
|
|
|
|
mplsVpnVrfConfHighRouteThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes high-level water marker for the number of
|
|
routes which this VRF may hold."
|
|
::= { mplsVpnVrfEntry 10 }
|
|
|
|
mplsVpnVrfConfMaxRoutes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes maximum number of routes which this VRF is
|
|
configured to hold. This value MUST be less than or
|
|
equal to mplsVrfMaxPossibleRoutes unless it is set
|
|
to 0."
|
|
::= { mplsVpnVrfEntry 11 }
|
|
|
|
mplsVpnVrfConfLastChanged OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time of the last
|
|
change of this table entry, which includes changes of
|
|
VRF parameters defined in this table or addition or
|
|
deletion of interfaces associated with this VRF."
|
|
::= { mplsVpnVrfEntry 12 }
|
|
|
|
mplsVpnVrfConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table."
|
|
::= { mplsVpnVrfEntry 13 }
|
|
|
|
mplsVpnVrfConfStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this entry."
|
|
::= { mplsVpnVrfEntry 14 }
|
|
|
|
-- MplsVpnRouteTargetTable
|
|
|
|
mplsVpnVrfRouteTargetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfRouteTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-VRF route target association.
|
|
Each entry identifies a connectivity policy supported
|
|
as part of a VPN."
|
|
::= { mplsVpnConf 3 }
|
|
|
|
mplsVpnVrfRouteTargetEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfRouteTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An entry in this table is created by an LSR for
|
|
each route target configured for a VRF supporting
|
|
a MPLS/BGP VPN instance. The indexing provides an
|
|
ordering per-VRF instance."
|
|
INDEX { mplsVpnVrfName, mplsVpnVrfRouteTargetIndex,
|
|
mplsVpnVrfRouteTargetType }
|
|
::= { mplsVpnVrfRouteTargetTable 1 }
|
|
|
|
MplsVpnVrfRouteTargetEntry ::= SEQUENCE {
|
|
mplsVpnVrfRouteTargetIndex Unsigned32,
|
|
mplsVpnVrfRouteTargetType INTEGER,
|
|
mplsVpnVrfRouteTarget MplsVpnRouteDistinguisher,
|
|
mplsVpnVrfRouteTargetDescr DisplayString,
|
|
mplsVpnVrfRouteTargetRowStatus RowStatus
|
|
}
|
|
|
|
mplsVpnVrfRouteTargetIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Auxiliary index for route-targets configured for a
|
|
particular VRF."
|
|
::= { mplsVpnVrfRouteTargetEntry 2 }
|
|
|
|
mplsVpnVrfRouteTargetType OBJECT-TYPE
|
|
SYNTAX INTEGER { import(1), export(2), both(3) }
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route target export distribution type."
|
|
::= { mplsVpnVrfRouteTargetEntry 3 }
|
|
|
|
mplsVpnVrfRouteTarget OBJECT-TYPE
|
|
SYNTAX MplsVpnRouteDistinguisher
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route target distribution policy."
|
|
::= { mplsVpnVrfRouteTargetEntry 4 }
|
|
|
|
mplsVpnVrfRouteTargetDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description of the route target."
|
|
::= { mplsVpnVrfRouteTargetEntry 5 }
|
|
|
|
mplsVpnVrfRouteTargetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status for this entry."
|
|
::= { mplsVpnVrfRouteTargetEntry 6 }
|
|
|
|
-- MplsVpnVrfBgpNbrAddrTable
|
|
|
|
mplsVpnVrfBgpNbrAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfBgpNbrAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry in this table specifies a per-interface
|
|
MPLS/EBGP neighbor."
|
|
::= { mplsVpnConf 4 }
|
|
|
|
mplsVpnVrfBgpNbrAddrEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfBgpNbrAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for
|
|
every VRF capable of supporting MPLS/BGP VPN. The
|
|
indexing provides an ordering of VRFs per-VPN
|
|
interface."
|
|
INDEX { mplsVpnVrfName, mplsVpnIfConfIndex,
|
|
mplsVpnVrfBgpNbrIndex }
|
|
::= { mplsVpnVrfBgpNbrAddrTable 1 }
|
|
|
|
MplsVpnVrfBgpNbrAddrEntry ::= SEQUENCE {
|
|
mplsVpnVrfBgpNbrIndex Unsigned32,
|
|
mplsVpnVrfBgpNbrRole INTEGER,
|
|
mplsVpnVrfBgpNbrType InetAddressType,
|
|
mplsVpnVrfBgpNbrAddr InetAddress,
|
|
mplsVpnVrfBgpNbrRowStatus RowStatus,
|
|
mplsVpnVrfBgpNbrStorageType StorageType
|
|
}
|
|
|
|
mplsVpnVrfBgpNbrIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a unique tertiary index for an entry in the
|
|
MplsVpnVrfBgpNbrAddrEntry Table."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 1 }
|
|
|
|
mplsVpnVrfBgpNbrRole OBJECT-TYPE
|
|
SYNTAX INTEGER { ce(1), pe(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the role played by this EBGP neighbor
|
|
with respect to this VRF."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 2 }
|
|
|
|
mplsVpnVrfBgpNbrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the address family of the PE address."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 3 }
|
|
|
|
mplsVpnVrfBgpNbrAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the EBGP neighbor address."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 4 }
|
|
|
|
mplsVpnVrfBgpNbrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 5 }
|
|
|
|
mplsVpnVrfBgpNbrStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this entry."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 6 }
|
|
|
|
-- MplsVpnVrfBgpNbrPrefixTable
|
|
|
|
--
|
|
-- Ed note: this table will be removed as soon as the BGP4 MIB
|
|
-- is updated.
|
|
--
|
|
mplsVpnVrfBgpNbrPrefixTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfBgpNbrPrefixEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-VRF vpnv4 multi-protocol
|
|
prefixes supported by BGP."
|
|
::= { mplsVpnConf 5 }
|
|
|
|
mplsVpnVrfBgpNbrPrefixEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfBgpNbrPrefixEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for
|
|
every BGP prefix associated with a VRF supporting a
|
|
MPLS/BGP VPN. The indexing provides an ordering of
|
|
BGP prefixes per VRF."
|
|
INDEX { mplsVpnVrfName, bgp4PathAttrIpAddrPrefix,
|
|
bgp4PathAttrIpAddrPrefixLen, bgp4PathAttrPeer }
|
|
::= { mplsVpnVrfBgpNbrPrefixTable 1 }
|
|
|
|
MplsVpnVrfBgpNbrPrefixEntry ::= SEQUENCE {
|
|
mplsVpnVrfBgpPAtrPeerType InetAddressType,
|
|
mplsVpnVrfBgpPAtrPeer InetAddress,
|
|
mplsVpnVrfBgpPAtrIpAddrPrefixLen Integer32,
|
|
mplsVpnVrfBgpPAtrIpAddrPfxType InetAddressType,
|
|
mplsVpnVrfBgpPAtrIpAddrPrefix InetAddress,
|
|
mplsVpnVrfBgpPAtrOrigin INTEGER,
|
|
mplsVpnVrfBgpPAtrASPathSegment OCTET STRING,
|
|
mplsVpnVrfBgpPAtrNextHopType InetAddressType,
|
|
mplsVpnVrfBgpPAtrNextHop InetAddress,
|
|
mplsVpnVrfBgpPAtrMultiExitDisc Integer32,
|
|
mplsVpnVrfBgpPAtrLocalPref Integer32,
|
|
mplsVpnVrfBgpPAtrAtomicAggregate INTEGER,
|
|
mplsVpnVrfBgpPAtrAggregatorAS Integer32,
|
|
mplsVpnVrfBgpPAtrAggrAddrType InetAddressType,
|
|
mplsVpnVrfBgpPAtrAggregatorAddr InetAddress,
|
|
mplsVpnVrfBgpPAtrCalcLocalPref INTEGER,
|
|
mplsVpnVrfBgpPAtrBest INTEGER,
|
|
mplsVpnVrfBgpPAtrUnknown OCTET STRING
|
|
}
|
|
|
|
mplsVpnVrfBgpPAtrPeerType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address type of the mplsVpnVrfBgpPAtrPeer object."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 1 }
|
|
|
|
mplsVpnVrfBgpPAtrPeer OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the peer where the path
|
|
information was learned."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 2 }
|
|
|
|
mplsVpnVrfBgpPAtrIpAddrPrefixLen OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Length in bits of the IP address prefix
|
|
in the Network Layer Reachability
|
|
Information field."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 3 }
|
|
|
|
mplsVpnVrfBgpPAtrIpAddrPfxType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address type of the mplsVpnVrfBgpPAtrIpAddrPrefix
|
|
object."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 4 }
|
|
|
|
mplsVpnVrfBgpPAtrIpAddrPrefix OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An IP address prefix in the Network Layer
|
|
Reachability Information field. This object
|
|
is an IP address containing the prefix with
|
|
length specified by mplsVpnVrfBgpPAtrIpAddrPrefixLen.
|
|
Any bits beyond the length specified by
|
|
mplsVpnVrfBgpPAtrIpAddrPrefixLen are zeroed."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 5 }
|
|
|
|
mplsVpnVrfBgpPAtrOrigin OBJECT-TYPE
|
|
SYNTAX INTEGER { igp(1),-- networks are interior
|
|
egp(2),-- networks learned via EGP
|
|
incomplete(3) -- undetermined
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ultimate origin of the path
|
|
information."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 6 }
|
|
|
|
mplsVpnVrfBgpPAtrASPathSegment OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence of AS path segments. Each AS
|
|
path segment is represented by a triple
|
|
<type, length, value>.
|
|
|
|
The type is a 1-octet field which has two
|
|
possible values:
|
|
1 AS_SET: unordered set of ASs a
|
|
route in the UPDATE
|
|
message has traversed
|
|
2 AS_SEQUENCE: ordered set of ASs
|
|
a route in the UPDATE
|
|
message has traversed.
|
|
The length is a 1-octet field containing the
|
|
number of ASs in the value field.
|
|
|
|
The value field contains one or more AS
|
|
numbers, each AS is represented in the octet
|
|
string as a pair of octets according to the
|
|
following algorithm:
|
|
first-byte-of-pair = ASNumber / 256;
|
|
second-byte-of-pair = ASNumber & 255;"
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 7 }
|
|
|
|
mplsVpnVrfBgpPAtrNextHopType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address type of the mplsVpnVrfBgpPAtrNextHop object."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 8 }
|
|
|
|
mplsVpnVrfBgpPAtrNextHop OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the border router that
|
|
should be used for the destination
|
|
network."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 9 }
|
|
|
|
mplsVpnVrfBgpPAtrMultiExitDisc OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This metric is used to discriminate
|
|
between multiple exit points to an
|
|
adjacent autonomous system. A value of -1
|
|
indicates the absence of this attribute."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 10 }
|
|
|
|
mplsVpnVrfBgpPAtrLocalPref OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The originating BGP4 speaker's degree of
|
|
preference for an advertised route. A
|
|
value of -1 indicates the absence of this
|
|
attribute."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 11 }
|
|
|
|
mplsVpnVrfBgpPAtrAtomicAggregate OBJECT-TYPE
|
|
SYNTAX INTEGER { lessSpecificRrouteNotSelected(1),
|
|
lessSpecificRouteSelected(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether or not the local system has
|
|
selected a less specific route without
|
|
selecting a more specific route."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 12 }
|
|
|
|
mplsVpnVrfBgpPAtrAggregatorAS OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS number of the last BGP4 speaker that
|
|
performed route aggregation. A value of
|
|
zero (0) indicates the absence of this
|
|
attribute."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 13 }
|
|
|
|
mplsVpnVrfBgpPAtrAggrAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address type of the mplsVpnVrfBgpPAtrAggrAddr
|
|
object."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 14 }
|
|
|
|
mplsVpnVrfBgpPAtrAggregatorAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the last BGP4 speaker
|
|
that performed route aggregation. A value
|
|
of 0.0.0.0 indicates the absence of this
|
|
attribute."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 15 }
|
|
|
|
mplsVpnVrfBgpPAtrCalcLocalPref OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The degree of preference calculated by the
|
|
receiving BGP4 speaker for an advertised
|
|
route. A value of -1 indicates the
|
|
absence of this attribute."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 16 }
|
|
|
|
mplsVpnVrfBgpPAtrBest OBJECT-TYPE
|
|
SYNTAX INTEGER { false(1),-- not chosen as best route
|
|
true(2) -- chosen as best route
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of whether or not this route
|
|
was chosen as the best BGP4 route."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 17 }
|
|
|
|
mplsVpnVrfBgpPAtrUnknown OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One or more path attributes not understood
|
|
by this BGP4 speaker. Size zero (0)
|
|
indicates the absence of such
|
|
attribute(s). Octets beyond the maximum
|
|
size, if any, are not recorded by this
|
|
object."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 18 }
|
|
|
|
-- VRF Security Table
|
|
|
|
mplsVpnVrfSecTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfSecEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per MPLS/BGP VPN VRF Table security
|
|
features."
|
|
::= { mplsVpnConf 6 }
|
|
|
|
mplsVpnVrfSecEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfSecEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for
|
|
every VRF capable of supporting MPLS/BGP VPN. Each
|
|
entry in this table is used to indicate security-related
|
|
information for each VRF entry."
|
|
AUGMENTS { mplsVpnVrfEntry }
|
|
::= { mplsVpnVrfSecTable 1 }
|
|
|
|
MplsVpnVrfSecEntry ::= SEQUENCE {
|
|
mplsVpnVrfSecIllegalLblVltns Counter32,
|
|
mplsVpnVrfSecIllegalLblRcvThrsh Unsigned32
|
|
}
|
|
mplsVpnVrfSecIllegalLblVltns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of illegally received labels on this VPN/VRF."
|
|
::= { mplsVpnVrfSecEntry 1 }
|
|
|
|
mplsVpnVrfSecIllegalLblRcvThrsh OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of illegally received labels above which this
|
|
notification is issued."
|
|
::= { mplsVpnVrfSecEntry 2 }
|
|
|
|
-- VRF Performance Table
|
|
|
|
mplsVpnVrfPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per MPLS/BGP VPN VRF Table performance
|
|
information."
|
|
::= { mplsVpnPerf 1 }
|
|
|
|
mplsVpnVrfPerfEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for
|
|
every VRF capable of supporting MPLS/BGP VPN."
|
|
AUGMENTS { mplsVpnVrfEntry }
|
|
::= { mplsVpnVrfPerfTable 1 }
|
|
|
|
MplsVpnVrfPerfEntry ::= SEQUENCE {
|
|
mplsVpnVrfPerfRoutesAdded Counter32,
|
|
mplsVpnVrfPerfRoutesDeleted Counter32,
|
|
mplsVpnVrfPerfCurrNumRoutes Unsigned32
|
|
}
|
|
|
|
mplsVpnVrfPerfRoutesAdded OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of routes added to this VPN/VRF over the
|
|
coarse of its lifetime."
|
|
::= { mplsVpnVrfPerfEntry 1 }
|
|
|
|
mplsVpnVrfPerfRoutesDeleted OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of routes removed from this VPN/VRF."
|
|
::= { mplsVpnVrfPerfEntry 2 }
|
|
|
|
mplsVpnVrfPerfCurrNumRoutes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of routes currently used by this VRF."
|
|
::= { mplsVpnVrfPerfEntry 3 }
|
|
|
|
-- VRF Routing Table
|
|
|
|
mplsVpnVrfRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-interface MPLS/BGP VPN VRF Table
|
|
routing information. Entries in this table define VRF routing
|
|
entries associated with the specified MPLS/VPN interfaces. Note
|
|
that this table contains both BGP and IGP routes, as both may
|
|
appear in the same VRF."
|
|
REFERENCE
|
|
"1. RFC 1213 Section 6.6, The IP Group.
|
|
2. RFC 2096 "
|
|
::= { mplsVpnRoute 1 }
|
|
|
|
mplsVpnVrfRouteEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for every route
|
|
present configured (either dynamically or statically) within
|
|
the context of a specific VRF capable of supporting MPLS/BGP
|
|
VPN. The indexing provides an ordering of VRFs per-VPN
|
|
interface."
|
|
INDEX { mplsVpnVrfName, mplsVpnVrfRouteDest,
|
|
mplsVpnVrfRouteMask, mplsVpnVrfRouteTos,
|
|
mplsVpnVrfRouteNextHop }
|
|
::= { mplsVpnVrfRouteTable 1 }
|
|
|
|
MplsVpnVrfRouteEntry ::= SEQUENCE {
|
|
mplsVpnVrfRouteDestAddrType InetAddressType,
|
|
mplsVpnVrfRouteDest InetAddress,
|
|
mplsVpnVrfRouteMaskAddrType InetAddressType,
|
|
mplsVpnVrfRouteMask InetAddress,
|
|
mplsVpnVrfRouteTos Unsigned32,
|
|
mplsVpnVrfRouteNextHopAddrType InetAddressType,
|
|
mplsVpnVrfRouteNextHop InetAddress,
|
|
mplsVpnVrfRouteIfIndex InterfaceIndexOrZero,
|
|
mplsVpnVrfRouteType INTEGER,
|
|
mplsVpnVrfRouteProto INTEGER,
|
|
mplsVpnVrfRouteAge Unsigned32,
|
|
mplsVpnVrfRouteInfo OBJECT IDENTIFIER,
|
|
mplsVpnVrfRouteNextHopAS Unsigned32,
|
|
mplsVpnVrfRouteMetric1 Integer32,
|
|
mplsVpnVrfRouteMetric2 Integer32,
|
|
mplsVpnVrfRouteMetric3 Integer32,
|
|
mplsVpnVrfRouteMetric4 Integer32,
|
|
mplsVpnVrfRouteMetric5 Integer32,
|
|
mplsVpnVrfRouteRowStatus RowStatus,
|
|
mplsVpnVrfRouteStorageType StorageType
|
|
}
|
|
|
|
mplsVpnVrfRouteDestAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of the mplsVpnVrfRouteDest
|
|
entry."
|
|
::= { mplsVpnVrfRouteEntry 1 }
|
|
|
|
mplsVpnVrfRouteDest OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route.
|
|
This object may not take a Multicast (Class D)
|
|
address value.
|
|
|
|
Any assignment (implicit or otherwise) of an
|
|
instance of this object to a value x must be
|
|
rejected if the bit-wise logical-AND of x with
|
|
the value of the corresponding instance of the
|
|
mplsVpnVrfRouteMask object is not equal to x."
|
|
::= { mplsVpnVrfRouteEntry 2 }
|
|
|
|
mplsVpnVrfRouteMaskAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of mplsVpnVrfRouteMask."
|
|
::= { mplsVpnVrfRouteEntry 3 }
|
|
|
|
mplsVpnVrfRouteMask OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the mask to be logical-ANDed with the
|
|
destination address before being compared to
|
|
the value in the mplsVpnVrfRouteDest field.
|
|
For those systems that do not support
|
|
arbitrary subnet masks, an agent constructs the
|
|
value of the mplsVpnVrfRouteMask by reference
|
|
to the IP Address Class.
|
|
|
|
Any assignment (implicit or otherwise) of an
|
|
instance of this object to a value x must be
|
|
rejected if the bit-wise logical-AND of x with
|
|
the value of the corresponding instance of the
|
|
mplsVpnVrfRouteDest object is not equal to
|
|
mplsVpnVrfRouteDest."
|
|
::= { mplsVpnVrfRouteEntry 4 }
|
|
|
|
mplsVpnVrfRouteTos OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP TOS Field is used to specify the policy to
|
|
be applied to this route. The encoding of IP TOS
|
|
is as specified by the following convention.
|
|
Zero indicates the default path if no more
|
|
specific policy applies.
|
|
|
|
+-----+-----+-----+-----+-----+-----+-----+-----+
|
|
| | | |
|
|
| PRECEDENCE | TYPE OF SERVICE | 0 |
|
|
| | | |
|
|
+-----+-----+-----+-----+-----+-----+-----+-----+
|
|
|
|
IP TOS IP TOS
|
|
Field Policy Field Policy
|
|
Contents Code Contents Code
|
|
0 0 0 0 ==> 0 0 0 0 1 ==> 2
|
|
0 0 1 0 ==> 4 0 0 1 1 ==> 6
|
|
0 1 0 0 ==> 8 0 1 0 1 ==> 10
|
|
0 1 1 0 ==> 12 0 1 1 1 ==> 14
|
|
1 0 0 0 ==> 16 1 0 0 1 ==> 18
|
|
1 0 1 0 ==> 20 1 0 1 1 ==> 22
|
|
1 1 0 0 ==> 24 1 1 0 1 ==> 26
|
|
1 1 1 0 ==> 28 1 1 1 1 ==> 30."
|
|
::= { mplsVpnVrfRouteEntry 5 }
|
|
|
|
mplsVpnVrfRouteNextHopAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of the mplsVpnVrfRouteNextHopAddrType
|
|
object."
|
|
::= { mplsVpnVrfRouteEntry 6 }
|
|
|
|
mplsVpnVrfRouteNextHop OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"On remote routes, the address of the next
|
|
system en route; Otherwise, 0.0.0.0. ."
|
|
::= { mplsVpnVrfRouteEntry 7 }
|
|
|
|
mplsVpnVrfRouteIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value that identifies the local
|
|
interface through which the next hop of this
|
|
route should be reached. If this value is set to 0,
|
|
this indicates that no interface is associated with
|
|
this route."
|
|
::= { mplsVpnVrfRouteEntry 8 }
|
|
|
|
mplsVpnVrfRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER { other (1), -- not specified
|
|
reject (2), -- route to discard traffic
|
|
local (3), -- local interface
|
|
remote (4) -- remote destination
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of route. Note that local(3) refers
|
|
to a route for which the next hop is the final
|
|
destination; remote(4) refers to a route for
|
|
that the next hop is not the final destination.
|
|
Routes which do not result in traffic forwarding or
|
|
rejection should not be displayed even if the
|
|
implementation keeps them stored internally.
|
|
|
|
reject (2) refers to a route which, if matched,
|
|
discards the message as unreachable. This is used
|
|
in some protocols as a means of correctly aggregating
|
|
routes."
|
|
::= { mplsVpnVrfRouteEntry 9 }
|
|
|
|
mplsVpnVrfRouteProto OBJECT-TYPE
|
|
SYNTAX INTEGER { other (1), -- not specified
|
|
local (2), -- local interface
|
|
netmgmt (3), -- static route
|
|
icmp (4), -- result of ICMP Redirect
|
|
|
|
-- the following are all dynamic
|
|
-- routing protocols
|
|
|
|
egp (5), -- Exterior Gateway Protocol
|
|
ggp (6), -- Gateway-Gateway Protocol
|
|
hello (7), -- FuzzBall HelloSpeak
|
|
rip (8), -- Berkeley RIP or RIP-II
|
|
isIs (9), -- Dual IS-IS
|
|
esIs (10), -- ISO 9542
|
|
ciscoIgrp (11), -- Cisco IGRP
|
|
bbnSpfIgp (12), -- BBN SPF IGP
|
|
ospf (13), -- Open Shortest Path First
|
|
bgp (14), -- Border Gateway Protocol
|
|
idpr (15), -- InterDomain Policy Routing
|
|
ciscoEigrp (16) -- Cisco EIGRP
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The routing mechanism via which this route was
|
|
learned. Inclusion of values for gateway rout-
|
|
ing protocols is not intended to imply that
|
|
hosts should support those protocols."
|
|
::= { mplsVpnVrfRouteEntry 10 }
|
|
|
|
mplsVpnVrfRouteAge OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds since this route was
|
|
last updated or otherwise determined to be
|
|
correct. Note that no semantics of `too old'
|
|
can be implied except through knowledge of the
|
|
routing protocol by which the route was
|
|
learned."
|
|
::= { mplsVpnVrfRouteEntry 11 }
|
|
|
|
mplsVpnVrfRouteInfo OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A reference to MIB definitions specific to the
|
|
particular routing protocol which is responsi-
|
|
ble for this route, as determined by the value
|
|
specified in the route's mplsVpnVrfRouteProto
|
|
value. If this information is not present, its
|
|
value SHOULD be set to the OBJECT IDENTIFIER
|
|
{ 0 0 }, which is a syntactically valid object
|
|
identif-ier, and any implementation conforming
|
|
to ASN.1 and the Basic Encoding Rules must be
|
|
able to generate and recognize this value."
|
|
::= { mplsVpnVrfRouteEntry 12 }
|
|
|
|
mplsVpnVrfRouteNextHopAS OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Autonomous System Number of the Next Hop.
|
|
The semantics of this object are determined by
|
|
the routing-protocol specified in the route's
|
|
mplsVpnVrfRouteProto value. When this object is
|
|
unknown or not relevant its value should be set
|
|
to zero."
|
|
::= { mplsVpnVrfRouteEntry 13 }
|
|
|
|
mplsVpnVrfRouteMetric1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The primary routing metric for this route.
|
|
The semantics of this metric are determined by
|
|
the routing-protocol specified in the route's
|
|
mplsVpnVrfRouteProto value. If this metric is not
|
|
used, its value should be set to -1."
|
|
::= { mplsVpnVrfRouteEntry 14 }
|
|
|
|
mplsVpnVrfRouteMetric2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route.
|
|
The semantics of this metric are determined by
|
|
the routing-protocol specified in the route's
|
|
mplsVpnVrfRouteProto value. If this metric is not
|
|
used, its value should be set to -1."
|
|
::= { mplsVpnVrfRouteEntry 15 }
|
|
|
|
mplsVpnVrfRouteMetric3 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route.
|
|
The semantics of this metric are determined by
|
|
the routing-protocol specified in the route's
|
|
mplsVpnVrfRouteProto value. If this metric is not
|
|
used, its value should be set to -1."
|
|
::= { mplsVpnVrfRouteEntry 16 }
|
|
|
|
mplsVpnVrfRouteMetric4 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route.
|
|
The semantics of this metric are determined by
|
|
the routing-protocol specified in the route's
|
|
mplsVpnVrfRouteProto value. If this metric is not
|
|
used, its value should be set to -1."
|
|
::= { mplsVpnVrfRouteEntry 17 }
|
|
|
|
mplsVpnVrfRouteMetric5 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route.
|
|
The semantics of this metric are determined by
|
|
the routing-protocol specified in the route's
|
|
mplsVpnVrfRouteProto value. If this metric is not
|
|
used, its value should be set to -1."
|
|
::= { mplsVpnVrfRouteEntry 18 }
|
|
|
|
mplsVpnVrfRouteRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status for this table. It is used according
|
|
to row installation and removal conventions."
|
|
::= { mplsVpnVrfRouteEntry 19 }
|
|
|
|
mplsVpnVrfRouteStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Storage type value."
|
|
::= { mplsVpnVrfRouteEntry 20 }
|
|
|
|
-- MPLS/BGP VPN Notifications
|
|
|
|
mplsVrfIfUp NOTIFICATION-TYPE
|
|
OBJECTS { mplsVpnIfConfRowStatus,
|
|
mplsVpnVrfOperStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when:
|
|
a. The ifOperStatus of an interface associated with a VRF
|
|
changes to the up(1) state.
|
|
b. When an interface with ifOperStatus = up(1) is
|
|
associated with a VRF."
|
|
::= { mplsVpnNotifications 1 }
|
|
|
|
mplsVrfIfDown NOTIFICATION-TYPE
|
|
OBJECTS { mplsVpnIfConfRowStatus,
|
|
mplsVpnVrfOperStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when:
|
|
a. The ifOperStatus of an interface associated with a VRF
|
|
changes to the down(1) state.
|
|
b. When an interface with ifOperStatus = up(1) state is
|
|
disassociated with a VRF."
|
|
::= { mplsVpnNotifications 2 }
|
|
|
|
mplsNumVrfRouteMidThreshExceeded NOTIFICATION-TYPE
|
|
OBJECTS { mplsVpnVrfPerfCurrNumRoutes,
|
|
mplsVpnVrfConfMidRouteThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the number of routes
|
|
contained by the specified VRF exceeds the value indicated by
|
|
mplsVrfMidRouteThreshold. A single notification MUST be generated
|
|
when this threshold is exceeded, and no other notifications of
|
|
this type should be issued until the value of
|
|
mplsVpnVrfPerfCurrNumRoutes has fallen below that of
|
|
mplsVpnVrfConfMidRouteThreshold."
|
|
::= { mplsVpnNotifications 3 }
|
|
|
|
mplsNumVrfRouteMaxThreshExceeded NOTIFICATION-TYPE
|
|
OBJECTS { mplsVpnVrfPerfCurrNumRoutes,
|
|
mplsVpnVrfConfHighRouteThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the number of routes
|
|
contained by the specified VRF reaches or attempts to exceed
|
|
the maximum allowed value as indicated by
|
|
mplsVrfMaxRouteThreshold. In cases where
|
|
mplsVpnVrfConfHighRouteThreshold is set to the same value
|
|
as mplsVpnVrfConfMaxRoutes, mplsVpnVrfConfHighRouteThreshold
|
|
need not be exceeded; rather, just reached for this notification
|
|
to be issued.
|
|
|
|
Note that mplsVpnVrfConfRouteMaxThreshTime denotes the interval at
|
|
which the this notification will be re-issued after the maximum value
|
|
has been exceeded (or reached if mplsVpnVrfConfMaxRoutes and
|
|
mplsVpnVrfConfHighRouteThreshold are equal) and the initial
|
|
notification has been issued. This value is intended to prevent continuous
|
|
generation of notifications by an agent in the event that routes are
|
|
continually added to a VRF after it has reached its maximum value. The
|
|
default value is 10 minutes. If this value is set to 0, the agent should
|
|
only issue a single notification at the time that the maximum threshold has
|
|
been reached, and should not issue any more notifications until the value
|
|
of routes has fallen below the configured threshold value."
|
|
::= { mplsVpnNotifications 4 }
|
|
|
|
mplsNumVrfSecIllglLblThrshExcd NOTIFICATION-TYPE
|
|
OBJECTS { mplsVpnVrfSecIllegalLblVltns }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the number of illegal
|
|
label violations on a VRF as indicated by
|
|
mplsVpnVrfSecIllegalLblVltns has exceeded
|
|
mplsVpnVrfSecIllegalLblRcvThrsh. The threshold is not
|
|
included in the varbind here because the value of
|
|
mplsVpnVrfSecIllegalLblVltns should be one greater than
|
|
the threshold at the time this notification is issued."
|
|
::= { mplsVpnNotifications 5 }
|
|
|
|
mplsNumVrfRouteMaxThreshCleared NOTIFICATION-TYPE
|
|
OBJECTS { mplsVpnVrfPerfCurrNumRoutes,
|
|
mplsVpnVrfConfHighRouteThreshold
|
|
}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated only after the number of routes
|
|
contained by the specified VRF reaches or attempts to exceed
|
|
the maximum allowed value as indicated by
|
|
mplsVrfMaxRouteThreshold, and then falls below this value. The
|
|
emission of this notification informs the operator that the
|
|
error condition has been cleared without the operator having to
|
|
query the device.
|
|
|
|
Note that mplsVpnVrfConfRouteMaxThreshTime denotes the interval at
|
|
which the the mplsNumVrfRouteMaxThreshExceeded notification will
|
|
be re-issued after the maximum value has been exceeded (or reached
|
|
if mplsVpnVrfConfMaxRoutes and mplsVpnVrfConfHighRouteThreshold
|
|
are equal) and the initial notification has been issued. Therefore,
|
|
the generation of this notification should also be emitted with this
|
|
same frequency (assuming that the error condition is cleared).
|
|
Specifically, if the error condition is reached and cleared several
|
|
times during the period of time specified in
|
|
mplsVpnVrfConfRouteMaxThreshTime, only a single notification will be
|
|
issued to indicate the first instance of the error condition as well
|
|
as the first time the error condition is cleared.
|
|
|
|
This behavior is intended to prevent continuous generation of notifications
|
|
by an agent in the event that routes are continually added and removed
|
|
to/from a VRF after it has reached its maximum value. The
|
|
default value is 10 minutes. If this value is set to 0, the agent should
|
|
issue a notification whenever the maximum threshold has
|
|
been cleared."
|
|
::= { mplsVpnNotifications 6 }
|
|
|
|
-- Conformance Statement
|
|
mplsVpnGroups
|
|
OBJECT IDENTIFIER ::= { mplsVpnConformance 1 }
|
|
|
|
mplsVpnCompliances
|
|
OBJECT IDENTIFIER ::= { mplsVpnConformance 2 }
|
|
|
|
-- Module Compliance
|
|
|
|
mplsVpnModuleCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statement for agents that support the
|
|
MPLS VPN MIB."
|
|
MODULE -- this module
|
|
|
|
-- The mandatory groups have to be implemented
|
|
-- by all LSRs supporting MPLS BGP/VPNs. However,
|
|
-- they may all be supported
|
|
-- as read-only objects in the case where manual
|
|
-- configuration is unsupported.
|
|
|
|
MANDATORY-GROUPS { mplsVpnScalarGroup,
|
|
mplsVpnVrfGroup,
|
|
mplsVpnIfGroup,
|
|
mplsVpnPerfGroup,
|
|
mplsVpnVrfRouteGroup,
|
|
mplsVpnVrfBgpNbrGroup,
|
|
mplsVpnVrfRouteTargetGroup,
|
|
mplsVpnVrfBgpPrefixGroup,
|
|
mplsVpnSecGroup,
|
|
mplsVpnNotificationGroup
|
|
}
|
|
|
|
::= { mplsVpnCompliances 1 }
|
|
|
|
-- Units of conformance.
|
|
|
|
mplsVpnScalarGroup OBJECT-GROUP
|
|
OBJECTS { mplsVpnConfiguredVrfs,
|
|
mplsVpnActiveVrfs,
|
|
mplsVpnConnectedInterfaces,
|
|
mplsVpnNotificationEnable,
|
|
mplsVpnVrfConfMaxPossibleRoutes,
|
|
mplsVpnVrfConfRouteMaxThreshTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of scalar objects required for MPLS VPN
|
|
management."
|
|
::= { mplsVpnGroups 1 }
|
|
|
|
mplsVpnVrfGroup OBJECT-GROUP
|
|
OBJECTS { mplsVpnVrfVpnId,
|
|
mplsVpnVrfDescription,
|
|
mplsVpnVrfRouteDistinguisher,
|
|
mplsVpnVrfCreationTime,
|
|
mplsVpnVrfOperStatus,
|
|
mplsVpnVrfActiveInterfaces,
|
|
mplsVpnVrfAssociatedInterfaces,
|
|
mplsVpnVrfConfMidRouteThreshold,
|
|
mplsVpnVrfConfHighRouteThreshold,
|
|
mplsVpnVrfConfMaxRoutes,
|
|
mplsVpnVrfConfLastChanged,
|
|
mplsVpnVrfConfRowStatus,
|
|
mplsVpnVrfConfStorageType
|
|
}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS VPN VRF
|
|
management."
|
|
::= { mplsVpnGroups 2 }
|
|
|
|
mplsVpnIfGroup OBJECT-GROUP
|
|
OBJECTS { mplsVpnIfLabelEdgeType,
|
|
mplsVpnIfVpnClassification,
|
|
mplsVpnIfVpnRouteDistProtocol,
|
|
mplsVpnIfConfStorageType,
|
|
mplsVpnIfConfRowStatus
|
|
}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS VPN interface
|
|
management."
|
|
::= { mplsVpnGroups 3 }
|
|
|
|
mplsVpnPerfGroup OBJECT-GROUP
|
|
OBJECTS { mplsVpnVrfPerfRoutesAdded,
|
|
mplsVpnVrfPerfRoutesDeleted,
|
|
mplsVpnVrfPerfCurrNumRoutes
|
|
}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS VPN
|
|
performance information."
|
|
::= { mplsVpnGroups 4 }
|
|
|
|
mplsVpnVrfBgpNbrGroup OBJECT-GROUP
|
|
OBJECTS { mplsVpnVrfBgpNbrRole,
|
|
mplsVpnVrfBgpNbrType,
|
|
mplsVpnVrfBgpNbrAddr,
|
|
mplsVpnVrfBgpNbrRowStatus,
|
|
mplsVpnVrfBgpNbrStorageType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS VPN
|
|
bgp neighbor-related information."
|
|
::= { mplsVpnGroups 5 }
|
|
|
|
mplsVpnVrfBgpPrefixGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mplsVpnVrfBgpPAtrOrigin,
|
|
mplsVpnVrfBgpPAtrASPathSegment,
|
|
mplsVpnVrfBgpPAtrNextHop,
|
|
mplsVpnVrfBgpPAtrMultiExitDisc,
|
|
mplsVpnVrfBgpPAtrLocalPref,
|
|
mplsVpnVrfBgpPAtrAtomicAggregate,
|
|
mplsVpnVrfBgpPAtrAggregatorAS,
|
|
mplsVpnVrfBgpPAtrAggregatorAddr,
|
|
mplsVpnVrfBgpPAtrCalcLocalPref,
|
|
mplsVpnVrfBgpPAtrBest,
|
|
mplsVpnVrfBgpPAtrUnknown,
|
|
mplsVpnVrfBgpPAtrPeerType,
|
|
mplsVpnVrfBgpPAtrIpAddrPfxType,
|
|
mplsVpnVrfBgpPAtrNextHopType,
|
|
mplsVpnVrfBgpPAtrAggrAddrType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS VPN
|
|
bgp neighbor-related information."
|
|
::= { mplsVpnGroups 6 }
|
|
|
|
mplsVpnSecGroup OBJECT-GROUP
|
|
OBJECTS { mplsVpnVrfSecIllegalLblVltns,
|
|
mplsVpnVrfSecIllegalLblRcvThrsh }
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS VPN
|
|
security-related information."
|
|
::= { mplsVpnGroups 7 }
|
|
|
|
mplsVpnVrfRouteGroup OBJECT-GROUP
|
|
OBJECTS { mplsVpnVrfRouteDestAddrType,
|
|
mplsVpnVrfRouteMaskAddrType,
|
|
mplsVpnVrfRouteNextHop,
|
|
mplsVpnVrfRouteNextHopAddrType,
|
|
mplsVpnVrfRouteIfIndex,
|
|
mplsVpnVrfRouteType,
|
|
mplsVpnVrfRouteProto,
|
|
mplsVpnVrfRouteAge,
|
|
mplsVpnVrfRouteInfo,
|
|
mplsVpnVrfRouteNextHopAS,
|
|
mplsVpnVrfRouteMetric1,
|
|
mplsVpnVrfRouteMetric2,
|
|
mplsVpnVrfRouteMetric3,
|
|
mplsVpnVrfRouteMetric4,
|
|
mplsVpnVrfRouteMetric5,
|
|
mplsVpnVrfRouteRowStatus,
|
|
mplsVpnVrfRouteStorageType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects required for VRF route table management."
|
|
::= { mplsVpnGroups 8 }
|
|
|
|
mplsVpnVrfRouteTargetGroup OBJECT-GROUP
|
|
OBJECTS { mplsVpnVrfRouteTargetDescr,
|
|
mplsVpnVrfRouteTarget,
|
|
mplsVpnVrfRouteTargetRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects required for VRF route target management."
|
|
::= { mplsVpnGroups 9 }
|
|
|
|
mplsVpnNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { mplsVrfIfUp,
|
|
mplsVrfIfDown,
|
|
mplsNumVrfRouteMidThreshExceeded,
|
|
mplsNumVrfRouteMaxThreshExceeded,
|
|
mplsNumVrfSecIllglLblThrshExcd,
|
|
mplsNumVrfRouteMaxThreshCleared
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects required for MPLS VPN notifications."
|
|
::= { mplsVpnGroups 10 }
|
|
|
|
-- End of MPLS-VPN-MIB
|
|
END
|
|
|
|
--
|
|
-- Copyright (C) The Internet Society (2000). All Rights Reserved.
|
|
-- This document and translations of it may be copied and furnished to
|
|
-- others, and derivative works that comment on or otherwise explain it or
|
|
-- assist in its implementation may be prepared, copied, published and
|
|
-- distributed, in whole or in part, without restriction of any kind,
|
|
-- provided that the above copyright notice and this paragraph are included
|
|
-- on all such copies and derivative works. However, this document itself
|
|
-- may not be modified in any way, such as by removing the copyright notice
|
|
-- or references to the Internet Society or other Internet organizations,
|
|
-- except as needed for the purpose of developing Internet standards in
|
|
-- which case the procedures for copyrights defined in the Internet
|
|
-- Standards process must be followed, or as required to translate it into
|
|
-- languages other than English.
|
|
--
|
|
-- The limited permissions granted above are perpetual and will not be
|
|
-- revoked by the Internet Society or its successors or assigns. This
|
|
-- document and the information contained herein is provided on an "AS IS"
|
|
-- basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE
|
|
-- DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
|
|
-- TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE
|
|
-- ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
|
|
-- PARTICULAR PURPOSE.
|