RBTWS-TRAP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    IpAddress, Unsigned32, TimeTicks
        FROM SNMPv2-SMI
    DisplayString, MacAddress, TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    RbtwsApAttachType, RbtwsRadioType,
    RbtwsApSerialNum, RbtwsApFingerprint,
    RbtwsAccessType, RbtwsRadioNum, RbtwsPowerLevel,
    RbtwsRadioPowerChangeType, RbtwsChannelChangeType,
    RbtwsApTransition, RbtwsApFailDetail, RbtwsApPortOrDapNum,
    RbtwsRadioConfigState, RbtwsApConnectSecurityType,
    RbtwsApServiceAvailability, RbtwsApWasOperational
        FROM RBTWS-AP-TC
    RbtwsClientSessionState, RbtwsClientAuthenProtocolType,
    RbtwsClientDot1xState, RbtwsUserAccessType
        FROM RBTWS-CLIENT-SESSION-TC
    rbtwsTraps, rbtwsTemporary, rbtwsMibs
        FROM RBTWS-ROOT-MIB;

rbtwsTrapMib MODULE-IDENTITY
    LAST-UPDATED "200705041700Z"
    ORGANIZATION "Enterasys Networks"
    CONTACT-INFO
        "www.enterasys.com"
    DESCRIPTION
        "Notifications emitted by Enterasys Networks wireless switches.

        AP = Access Point;
        AC = Access Controller (wireless switch),
             the device that runs a SNMP Agent implementing this MIB.

        Copyright 2007 Enterasys Networks, Inc.
        All rights reserved.
        This SNMP Management Information Base
        Specification (Specification) embodies
        confidential and proprietary intellectual property.

        This Specification is supplied 'AS IS' and Enterasys Networks
        makes no warranty, either express or implied, as to the use,
        operation, condition, or performance of the Specification."

    REVISION "200705040055Z"
    DESCRIPTION "v2.6.6: added one value (3)
                to RbtwsClientIpAddrChangeReason
                (for 6.0 release)"

    REVISION "200701090050Z"
    DESCRIPTION "v2.6.4: Added two new traps:
                             rbtwsMobilityDomainFailOverTrap,
                             rbtwsMobilityDomainFailBackTrap
                and related objects:
                             rbtwsMobilityDomainSecondarySeedIp,
                             rbtwsMobilityDomainPrimarySeedIp
                (for 6.0 release)"

    REVISION "200609280045Z"
    DESCRIPTION "v2.6.2: Factored out four textual conventions
                into a new module, Client Session TC:
                    RbtwsClientSessionState,
                    RbtwsClientAuthenProtocolType,
                    RbtwsClientDot1xState,
                    RbtwsUserAccessType
                and imported them from there."

    REVISION "200608080042Z"
    DESCRIPTION "v2.5.2: Added new trap: rbtwsApRejectLicenseExceededTrap
                and related object: rbtwsNumLicensedActiveAPs
                (for 6.0 release)"

    REVISION "200607310040Z"
    DESCRIPTION "v2.5.0: Added new trap:
                rbtwsRFDetectAdhocUserDisappearTrap
                (for 6.0 release)"

    REVISION "200607280032Z"
    DESCRIPTION "v2.4.7: Removed unused imports"

    REVISION "200607230029Z"
    DESCRIPTION "v2.4.1: Added new trap: rbtwsRFDetectBlacklistedTrap,
                related textual convention: RbtwsBlacklistingCause
                and objects: rbtwsBlacklistingRemainingTime,
                             rbtwsBlacklistingCause
                (for 6.0 release)"

    REVISION "200607120028Z"
    DESCRIPTION "v2.4.0: Added new trap: RFDetectClientViaRogueWiredAPTrap2
                and related object: rbtwsRFDetectRogueAPMacAddr.
                This trap obsoletes the RFDetectClientViaRogueWiredAPTrap
                (for 6.0 release)"

    REVISION "200607070026Z"
    DESCRIPTION "v2.3.1: Added 3 new traps:
                rbtwsClientAssociationSuccessTrap,
                rbtwsClientAuthenticationSuccessTrap,
                rbtwsClientDeAuthenticationTrap
                (for 6.0 release)"

    REVISION "200607070025Z"
    DESCRIPTION "v2.3.0: Added new trap: rbtwsClientIpAddrChangeTrap
                and related object: RbtwsClientIpAddrChangeReason
                (for 6.0 release)"    

    REVISION "200607060023Z"
    DESCRIPTION "v2.2.0: added two values (13, 14)
                to RbtwsAuthenticationFailureType
                (for 6.0 release)"

    REVISION "200604190022Z"
    DESCRIPTION "v2.1.6: Updated client connection failure causes and descriptions
                (for 5.0 release)"

    REVISION "200604190021Z"
    DESCRIPTION "v2.0.6: Revised for 4.1 release"

    REVISION "200501010000Z"
    DESCRIPTION "v1: initial version, as for 4.0 and older releases"

    ::= { rbtwsMibs 1 }

-- Branch for notifications
rbtwsTrapsV2 OBJECT IDENTIFIER ::= { rbtwsTraps 0 }

-- Textual Conventions
RbtwsAssociationFailureType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
    "Enumeration of the reasons for an AP to fail a
    client's 802.11 association"
    SYNTAX      INTEGER {
            other               (1),
            load-balance        (2),
            quiet-period        (3),
            dot1x               (4),
            no-prev-assoc       (5),
            glare               (6),
            cipher-rejected     (7),
            cipher-mismatch     (8),
            wep-not-configured  (9),
            bad-assoc-request   (10),
            out-of-memory       (11),
            tkip-cm-active      (12),
            roam-in-progress    (13)
        }

RbtwsAuthenticationFailureType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
    "Enumeration of the reasons for AAA authentication to fail
     user-glob-mismatch - auth rule/user not found for console login
     user-does-not-exist - login failed because user not found
     invalid-password - login failed because of invalid password
     server-timeout - unable to contact a AAA server
     signature-failed - incorrect password for mschapv2
     local-certificate-error - certificate error
     all-servers-down - unable to contact any AAA server in the group
     authentication-type-mismatch - client and switch are using different
                                    authentication methods
     server-rejected - received reject from AAA server
     fallthru-auth-misconfig - problem with fallthru authentication
     no-lastresort-auth - problem with last-resort authentication
     exceeded-max-attempts - local user failed to login within allowed number
                             of attempts resulting in account lockout
     password-expired - user's password expired"

    SYNTAX      INTEGER {
            other               (1),
            user-glob-mismatch  (2),
            user-does-not-exist (3),
            invalid-password    (4),
            server-timeout      (5),
            signature-failed    (6),
            local-certificate-error (7),
            all-servers-down    (8),
            authentication-type-mismatch (9),
            server-rejected     (10),
            fallthru-auth-misconfig (11),
            no-lastresort-auth  (12),
            exceeded-max-attempts (13),
            password-expired (14)
        }

RbtwsAuthorizationFailureType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
    "Enumeration of the reasons for AAA authorization failure"
    SYNTAX      INTEGER {
            other               (1),
            user-param          (2),
            location-policy     (3),
            vlan-tunnel-failure (4),
            ssid-mismatch       (5),
            acl-mismatch        (6),
            timeofday-mismatch  (7),
            crypto-type-mismatch(8),
            mobility-profile-mismatch(9),
            start-date-mismatch (10),
            end-date-mismatch   (11),
            svr-type-mismatch   (12)
        }

RbtwsDot1xFailureType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
    "Enumeration of the dot1x failure reasons.
    quiet-period occurs when client is denied access for a period of
                 time after a failed connection attempt
    administrative-kill means that the session was cleared using the
                        'clear dot1x client' command
    bad-rsnie means that client sent an invalid IE 
    timeout is when there are excessive retransmissions
    max-sessions-exceeded means the maximum allowed wired clients
                          has been exceeded on the switch
    fourway-hs-failure is for failures occuring the 4-way key handshake
    user-glob-mismatch means the name received in the dot1x identity
                       request does not match any configured userglobs
                       in the system
    reauth-disabled means that the client is trying to reauthenticate
                    but reauthentication is disabled
    gkhs-failure means that either there was no response from the client
                 during the GKHS or the response did not have an IE
    force-unauth-configured means that the client is trying to connect
                            through a port which is configured as
                            force-unauth
    cert-not-installed means that there is no certificate installed on 
                       the switch"                    
    SYNTAX      INTEGER {
            other               (1),
            quiet-period        (2),
            administrative-kill (3),
            bad-rsnie           (4),
            timeout             (5),
            max-sessions-exceeded(6),
            fourway-hs-failure  (7),
            user-glob-mismatch  (8),
            bonded-auth-failure (9),
            reauth-disabled     (10),
            gkhs-failure        (11),
            force-unauth-configured (12),
            cert-not-installed  (13)
         }

RbtwsRFDetectDoSType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
    "The types of denial of service (DoS) attacks"
    SYNTAX      INTEGER {
            probe-flood(1),
            auth-flood(2),
            null-data-flood(3),
            mgmt-6-flood(4),
            mgmt-7-flood(5),
            mgmt-d-flood(6),
            mgmt-e-flood(7),
            mgmt-f-flood(8),
            fakeap-ssid(9),
            fakeap-bssid(10),
            bcast-deauth(11),
            null-probe-resp(12),
            disassoc-spoof(13),
            deauth-spoof(14),
            decrypt-err(15),
            weak-wep-iv(16),
            wireless-bridge(17),
            netstumbler(18),
            wellenreiter(19),
            adhoc-client-frame(20),
            associate-pkt-flood(21),
            re-associate-pkt-flood(22),
            de-associate-pkt-flood(23)
        }

RbtwsClientIpAddrChangeReason ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Describes the reasons for client IP address changes"
    SYNTAX      INTEGER {
            client-connected(1),
            other(2),
            dhcp-to-static(3)
        }

RbtwsBlacklistingCause ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Enumeration of reasons for blacklisting a transmitter:
            bl-configured: administrative action
                           (explicitly added to the Black List),
            bl-associate-pkt-flood: Association request flood detected,
            bl-re-associate-pkt-flood: Re-association request flood detected,
            bl-de-associate-pkt-flood: De-association request flood detected.
        (The leading 'bl-' stands for 'Black-Listed';
         reading it as 'Blocked' would also make sense)."
    SYNTAX      INTEGER {
            bl-configured(1),
            bl-associate-pkt-flood(2),
            bl-re-associate-pkt-flood(3),
            bl-de-associate-pkt-flood(4)
        }


-- Object definitions

rbtwsDeviceId OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "Enumeration of devices as indicated in registration MIB.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 1 }

rbtwsMobilityDomainIp OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "IP address of the other switch which the send switch is
    reporting on. This object is used
    within notifications and is not accessible."
    ::= { rbtwsTemporary 2 }

rbtwsAPMACAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "MAC address of the AP of interest. This object is used
    within notifications and is not accessible."
    ::= { rbtwsTemporary 3 }

rbtwsClientMACAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "MAC address of the client of interest. This object is used
    within notifications and is not accessible."
    ::= { rbtwsTemporary 4 }

rbtwsRFDetectXmtrMacAddr OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "Describes the transmitter's MAC address. This object is used
    within notifications and is not accessible."
    ::= { rbtwsTemporary 5 }

rbtwsPortNum OBJECT-TYPE
    SYNTAX      INTEGER (1..22)
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "Port number on the AC which reported this rogue during a detection
     sweep. This object is used within notifications and
     is not accessible."
    ::= { rbtwsTemporary 6 }

rbtwsAPRadioNum OBJECT-TYPE
    SYNTAX      RbtwsRadioNum
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "Radio number of the AP which reported this rogue during a detection
     sweep. This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 7 }

rbtwsRadioRssi OBJECT-TYPE
    SYNTAX      INTEGER (0..1024)
    MAX-ACCESS  accessible-for-notify
    STATUS      deprecated
    DESCRIPTION
    "The received signal strength as measured by the AP radio which reported
     this rogue during a detection sweep. This object is used
    within notifications and is not accessible."
    ::= { rbtwsTemporary 8 }

rbtwsRadioBSSID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (6))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The basic service set identifier of the rogue from the beacon frame
    reported by the AP during a detection sweep. This object is used
    within notifications and is not accessible."
    ::= { rbtwsTemporary 9 }

rbtwsUserName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The client user name as learned from the AAA process. This object
    is used within notifications and is not accessible."
    ::= { rbtwsTemporary 10 }

rbtwsClientAuthServerIp OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The client authentication server ip address. This object is used
    within notifications and is not accessible."
    ::= { rbtwsTemporary 11 }

rbtwsClientSessionState OBJECT-TYPE
    SYNTAX      RbtwsClientSessionState
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The state for a client session. This object is used
    within notifications and is not accessible."
    ::= { rbtwsTemporary 12 }

rbtwsDAPNum OBJECT-TYPE
    SYNTAX      INTEGER (1..100)
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The DAP number on the wireless switch. This object is used
    within notifications and is not accessible."
    ::= { rbtwsTemporary 13 }

rbtwsClientIp OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The client ip address. This object is used
    within notifications and is not accessible."
    ::= { rbtwsTemporary 14 }

rbtwsClientSessionId OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The unique global id for a client session. This object is used
    within notifications and is not accessible."
    ::= { rbtwsTemporary 15 }

rbtwsClientAuthenProtocolType OBJECT-TYPE
    SYNTAX      RbtwsClientAuthenProtocolType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The authentication protocol for a client.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 16 }

rbtwsClientVLANName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The vlan name a client is on. This object is used within
    notifications and is not accessible."
    ::= { rbtwsTemporary 17 }

rbtwsClientSessionStartTime OBJECT-TYPE
    SYNTAX      TimeTicks
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The start time of a client session, relative to the sysUptime.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 18 }

rbtwsClientFailureCause OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "Display string for possible failure cause for a client session.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 19 }

rbtwsClientRoamedFromPortNum OBJECT-TYPE
    SYNTAX      INTEGER (1..20)
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The port number on the AC a client has roamed from.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 20 }

rbtwsClientRoamedFromRadioNum OBJECT-TYPE
    SYNTAX      RbtwsRadioNum
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The radio number of the AP the client is roamed from. This object is
    used within notifications and is not accessible."
    ::= { rbtwsTemporary 21 }

rbtwsClientRoamedFromDAPNum OBJECT-TYPE
    SYNTAX      INTEGER (1..100)
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The DAP number on the AC which reported this rogue during roam.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 22 }

rbtwsUserParams OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "A display string of User Parameters for client user authorization
    attributes learned through AAA and/or used by the system. Note
    that the syntax will be (name=value, name=value,..) for the
    parsing purpose. This object is used within notifications and
    is not accessible."
    ::= { rbtwsTemporary 23 }

rbtwsClientLocationPolicyIndex OBJECT-TYPE
    SYNTAX      INTEGER (0..1024)
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "Index of the Location Policy rule applied to a user.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 24 }

rbtwsClientAssociationFailureCause OBJECT-TYPE
    SYNTAX      RbtwsAssociationFailureType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The client association failure cause.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 25 }

rbtwsClientAuthenticationFailureCause OBJECT-TYPE
    SYNTAX      RbtwsAuthenticationFailureType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The client authentication failure cause.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 26 }

rbtwsClientAuthorizationFailureCause OBJECT-TYPE
    SYNTAX      RbtwsAuthorizationFailureType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The client authorization failure cause. Note that if it is
    the user-param, we would additionally expect the failure cause
    description to list the user attribute value that caused the
    failure. This object is used within notifications and is
    not accessible."
    ::= { rbtwsTemporary 27 }

rbtwsClientFailureCauseDescription OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "Display string for describing the client failure cause.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 28 }

rbtwsClientRoamedFromWsIp OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The system IP address of the AC (wireless switch) a client roamed from.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 29 }

rbtwsClientRoamedFromAccessType OBJECT-TYPE
    SYNTAX      RbtwsAccessType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The client access type (ap, dap, wired) that a client roamed from.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 30 }

rbtwsClientAccessType OBJECT-TYPE
    SYNTAX      RbtwsAccessType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The client access type (ap, dap, wired).
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 31 }

rbtwsRadioMACAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "AP Radio MAC address.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 32 }

rbtwsRadioPowerChangeReason OBJECT-TYPE
    SYNTAX      RbtwsRadioPowerChangeType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The type of event that caused an AP radio power change; occurs due
    to auto-tune operation.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 33 }

rbtwsNewChannelNum OBJECT-TYPE
    SYNTAX      INTEGER (1..1024)
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "New channel number of the AP radio used after an auto tune event.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 34 }

rbtwsOldChannelNum OBJECT-TYPE
    SYNTAX      INTEGER (1..1024)
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "Old channel number of the AP radio used before an auto tune event.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 35 }

rbtwsChannelChangeReason OBJECT-TYPE
    SYNTAX      RbtwsChannelChangeType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The type of event that caused an AP radio channel change; occurs due
    to auto-tune operation.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 36 }

rbtwsRFDetectListenerListInfo OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..571))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The RF Detection Listener list info including a list of
    (listener mac, rssi, channel, ssid, time).
    There will be a maximum of 6 entries in the list.
    Formats:
        MAC: 18 bytes:          %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X
        RSSI: 10 bytes:         %10d
        CHANNEL: 3 bytes:       %3d
        SSID: 32 bytes:         %s
        TIME: 26 bytes:         %s
    Maximum size per entry is 89+4+2 = 95 bytes.
    Maximum size of the string is 6*95= 571 bytes (include NULL).
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 37 }

rbtwsRadioSSID OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The radio SSID string
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 38 }

rbtwsNewPowerLevel OBJECT-TYPE
    SYNTAX      RbtwsPowerLevel
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "New power level of the AP radio used after an auto tune event.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 39 }

rbtwsOldPowerLevel OBJECT-TYPE
    SYNTAX      RbtwsPowerLevel
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "Old power level of the AP radio used before an auto tune event.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 40 }

rbtwsRadioPowerChangeDescription OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The radio power change description. In the case of reason being
    dup-pkts-threshold-exceed(1), and retransmit-threshold-exceed(2),
    clientMacAddress will be included in the description.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 41 }

rbtwsCounterMeasurePerformerListInfo OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  accessible-for-notify
    STATUS      obsolete
    DESCRIPTION
    "A list of information for APs performing Counter Measures including
    a list of performer mac addresses. This object is used within
    notifications and is not accessible.

    Not used by any notification."
    ::= { rbtwsTemporary 42 }

rbtwsClientDot1xState OBJECT-TYPE
    SYNTAX      RbtwsClientDot1xState
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The state for a client 802.1X.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 43 }

rbtwsClientDot1xFailureCause OBJECT-TYPE
    SYNTAX      RbtwsDot1xFailureType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The client 802.1X failure cause.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 44 }

rbtwsAPAccessType OBJECT-TYPE
    SYNTAX      RbtwsAccessType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The access point access type (ap, dap,).
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 45 }

rbtwsUserAccessType OBJECT-TYPE
    SYNTAX      RbtwsUserAccessType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The user access type (MAC, WEB, DOT1X, LAST-RESORT).
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 46}

rbtwsClientSessionElapsedTime OBJECT-TYPE
    SYNTAX      TimeTicks
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The elapsed time for a client session, relative to the sysUptime.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 47 }

rbtwsLocalId OBJECT-TYPE
    SYNTAX      INTEGER (1..65000)
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "Local Id for the session.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 48 }

rbtwsRFDetectDoSType OBJECT-TYPE
    SYNTAX      RbtwsRFDetectDoSType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "The type of denial of service (DoS) attack.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 49 }

rbtwsSourceWsIp OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "IP address of another AC (wireless switch).
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 50 }

rbtwsClientVLANid OBJECT-TYPE
    SYNTAX      INTEGER (0..4095)
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "VLAN ID used by client traffic.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 51 }

rbtwsClientVLANtag OBJECT-TYPE
    SYNTAX      INTEGER (0..4095)
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "VLAN tag used by client traffic.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 52 }

rbtwsDeviceModel OBJECT-TYPE
    SYNTAX       DisplayString
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
    "The model of a device in printable US-ASCII. If unknown
    (or not available), then the value is a zero length string.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 53 }

rbtwsDeviceSerNum OBJECT-TYPE
    SYNTAX       RbtwsApSerialNum
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
    "The serial number of a device in printable US-ASCII. If unknown
    (or not available), then the value is a zero length string.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 54 }

rbtwsRsaPubKeyFingerPrint OBJECT-TYPE
    SYNTAX       RbtwsApFingerprint
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
    "The hash of the RSA public key (of a key pair) in binary form
    that uniquely identifies the public key of an AP.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 55 }

rbtwsDAPconnectWarningType OBJECT-TYPE
    SYNTAX       INTEGER {
            not-configured-fingerprint-connect(1),
            secure-handshake-failure(2),
            not-configured-fingerprint-required(3),
            fingerprint-mismatch(4)
            }
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
    "The type of DAP connect warning. The values are:
      not-configured-fingerprint-connect(1)...a DAP, which has an RSA keypair
           but did not have its fingerprint configured on the AC, has connected
           to the AC when 'dap security' set to 'OPTIONAL'
      secure-handshake-failure(2).............a DAP tried to connect to the
           AC with security, but the handshake failed
      not-configured-fingerprint-required(3)..a DAP tried to connect to the
           AC with security, but 'dap security' set to 'REQUIRED',
           and no fingerprint was configured for the DAP
      fingerprint-mismatch(4).................a DAP tried to connect to the
           AC with security and its fingerprint was configured, but
           the fingerprint did not match the computed one

      This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 56 }

rbtwsClientMACAddress2 OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (6))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "MAC address of the second client of interest. This object
    is used within notifications and is not accessible."
    ::= { rbtwsTemporary 57 }

rbtwsApAttachType OBJECT-TYPE
    SYNTAX      RbtwsApAttachType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "How the AP is attached to the AC
        (directly or via L2/L3 network).
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 58 }

rbtwsApPortOrDapNum OBJECT-TYPE
    SYNTAX      RbtwsApPortOrDapNum
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The Port Number if the AP is directly attached,
        or the CLI-assigned DAP Number if attached via L2/L3 network.
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 59 }

rbtwsApName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The name of the AP, as assigned in AC's CLI;
        defaults to <Access-Type><Number> (examples: 'MP01', 'DMP23');
        could have been changed from CLI to a meaningful name,
        for example the location of the AP (example: 'MeetingRoom73').
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 60 }

rbtwsApTransition OBJECT-TYPE
    SYNTAX      RbtwsApTransition
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "AP state Transition, as seen by the AC.
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 61 }

rbtwsApFailDetail OBJECT-TYPE
    SYNTAX      RbtwsApFailDetail
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Detailed failure code for some of the transitions
        specified in 'rbtwsApTransition' object.
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 62 }

rbtwsRadioType OBJECT-TYPE
    SYNTAX      RbtwsRadioType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Indicates the Radio Type, as seen by AC.
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 63 }

rbtwsRadioConfigState OBJECT-TYPE
    SYNTAX      RbtwsRadioConfigState
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Indicates the Radio State, as seen by the AC.
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 64 }

rbtwsApConnectSecurityType OBJECT-TYPE
    SYNTAX      RbtwsApConnectSecurityType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Indicates the security level of the connection between AP and AC.
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 65 }

rbtwsApServiceAvailability OBJECT-TYPE
    SYNTAX      RbtwsApServiceAvailability
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Indicates the level of wireless service availability.
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 66 }

rbtwsApWasOperational OBJECT-TYPE
    SYNTAX      RbtwsApWasOperational
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Indicates whether the AP was operational
        before a transition occured.
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 67 }

rbtwsClientTimeSinceLastRoam OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The time in seconds since the most recent roam of a given client.
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 68 }

rbtwsClientIpAddrChangeReason OBJECT-TYPE
    SYNTAX      RbtwsClientIpAddrChangeReason
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Indicates the reason why client IP address changed.
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 69 }

rbtwsRFDetectRogueAPMacAddr OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
    "Describes the MAC address of the Rogue AP the transmitter is connected to.
    This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 70 }

rbtwsBlacklistingRemainingTime OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The time in seconds remaining until a given transmitter could be
        removed from the Black List.
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 71 }

rbtwsBlacklistingCause OBJECT-TYPE
    SYNTAX      RbtwsBlacklistingCause
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Indicates the reason why a given transmitter is blacklisted.
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 72 }

rbtwsNumLicensedActiveAPs OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Indicates the maximum (licensed) number of active APs for this AC.
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 73 }

rbtwsMobilityDomainSecondarySeedIp OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The secondary seed IP address to which the Mobility Domain
        has failed over.
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 79 }

rbtwsMobilityDomainPrimarySeedIp OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The primary seed IP address to which the Mobility Domain
        has failed back.
        This object is used within notifications and is not accessible."
    ::= { rbtwsTemporary 80 }


-- Notification definitions

rbtwsDeviceFailTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsDeviceId }
    STATUS      current
    DESCRIPTION
    "The device has a failure indication"
    ::= { rbtwsTrapsV2 1 }

rbtwsDeviceOkayTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsDeviceId }
    STATUS      current
    DESCRIPTION
    "The device has recovered"
    ::= { rbtwsTrapsV2 2 }

rbtwsPoEFailTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsPortNum }
    STATUS      current
    DESCRIPTION
    "PoE has failed on the indicated port"
    ::= { rbtwsTrapsV2 3 }

rbtwsApTimeoutTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsPortNum, rbtwsAPMACAddress, rbtwsAPAccessType,
          rbtwsDAPNum }
    STATUS      obsolete
    DESCRIPTION
    "The AP entering the AC at port rbtwsPortNum with MAC
    rbtwsRadioMacAddress and of the access type (ap or dap)
    has not responded.

    Replaced by rbtwsApNonOperStatusTrap,
    with rbtwsApTransition = 'timeout'."
    ::= { rbtwsTrapsV2 4 }

rbtwsAPBootTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsPortNum, rbtwsAPMACAddress, rbtwsAPAccessType,
          rbtwsDAPNum }
    STATUS      obsolete
    DESCRIPTION
    "The AP entering the AC at port rbtwsPortNum with MAC
    rbtwsRadioMacAddress and of the access type (ap or dap) has booted.

    Replaced by rbtwsApNonOperStatusTrap,
    with rbtwsApTransition = 'bootSuccess'."
    ::= { rbtwsTrapsV2 5 }

rbtwsMobilityDomainJoinTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsMobilityDomainIp }
    STATUS      current
    DESCRIPTION
    "The mobility domain member has received an UP notice from the
    remote address."
    ::= { rbtwsTrapsV2 6 }

rbtwsMobilityDomainTimeoutTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsMobilityDomainIp }
    STATUS      current
    DESCRIPTION
    "The mobility domain member has declared the remote address
    to be DOWN."
    ::= { rbtwsTrapsV2 7 }

rbtwsMpMichaelMICFailure NOTIFICATION-TYPE
    OBJECTS     { rbtwsPortNum,
          rbtwsRadioMACAddress,
          rbtwsRadioSSID,
          rbtwsAPRadioNum,
          rbtwsClientMACAddress,
          rbtwsClientMACAddress }
    STATUS      obsolete
    DESCRIPTION
    "Two Michael MIC failures were seen within 60 seconds of each other.

    This notification obsoleted by rbtwsMpMichaelMICFailure2."
    ::= { rbtwsTrapsV2 8 }

rbtwsRFDetectRogueAPTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRFDetectXmtrMacAddr,
          rbtwsRFDetectListenerListInfo }
    STATUS      current
    DESCRIPTION
    "This trap is sent when RF detection finds a rogue AP.
    XmtrMacAddr is the radio MAC address from the beacon.
    ListenerListInfo is a display string of a list of
    listener information."
    ::= { rbtwsTrapsV2 9 }

rbtwsRFDetectAdhocUserTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRFDetectXmtrMacAddr,
          rbtwsRFDetectListenerListInfo }
    STATUS      current
    DESCRIPTION
    "This trap is sent when RF detection sweep finds a ad-hoc user.
    rbtwsRFDetectXmtrMacAddr is the MAC address of the ad-hoc user.
    rbtwsRFDetectListenerListInfo is a display string of a list of
    listener information."
    ::= { rbtwsTrapsV2 10 }

rbtwsRFDetectRogueDisappearTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRFDetectXmtrMacAddr }
    STATUS      current
    DESCRIPTION
    "This trap is sent when a rogue has disappeared."
    ::= { rbtwsTrapsV2 11 }

rbtwsClientAuthenticationFailureTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsUserName,
          rbtwsClientSessionId,
          rbtwsClientMACAddress,
          rbtwsClientAuthServerIp,
          rbtwsClientAuthenProtocolType,
          rbtwsClientAccessType,
          rbtwsPortNum,
          rbtwsAPRadioNum,
          rbtwsDAPNum,
          rbtwsRadioSSID,
          rbtwsClientAuthenticationFailureCause,
          rbtwsClientFailureCauseDescription }
    STATUS      current
    DESCRIPTION
    "This trap is sent if a client authentication fails."
    ::= { rbtwsTrapsV2 12 }

rbtwsClientAuthorizationFailureTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsUserName,
          rbtwsClientSessionId,
          rbtwsClientMACAddress,
          rbtwsClientAuthServerIp,
          rbtwsClientAuthenProtocolType,
          rbtwsClientAccessType,
          rbtwsPortNum,
          rbtwsAPRadioNum,
          rbtwsDAPNum,
          rbtwsRadioSSID,
          rbtwsClientLocationPolicyIndex,
          rbtwsUserParams,
          rbtwsClientAuthorizationFailureCause,
          rbtwsClientFailureCauseDescription }
    STATUS      current
    DESCRIPTION
    "This trap is sent if a client authorization fails."
    ::= { rbtwsTrapsV2 13 }

rbtwsClientAssociationFailureTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsClientMACAddress,
          rbtwsClientAccessType,
          rbtwsPortNum,
          rbtwsAPRadioNum,
          rbtwsDAPNum,
          rbtwsRadioSSID,
          rbtwsClientAssociationFailureCause,
          rbtwsClientFailureCauseDescription }
    STATUS      current
    DESCRIPTION
    "This trap is sent if a client association fails."
    ::= { rbtwsTrapsV2 14 }

rbtwsClientAuthorizationSuccessTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsUserName,
          rbtwsClientSessionId,
          rbtwsClientMACAddress,
          rbtwsClientIp,
          rbtwsClientVLANName,
          rbtwsClientSessionState,
          rbtwsClientSessionStartTime,
          rbtwsClientAuthServerIp,
          rbtwsClientAuthenProtocolType,
          rbtwsClientAccessType,
          rbtwsPortNum,
          rbtwsAPRadioNum,
          rbtwsDAPNum,
          rbtwsRadioSSID,
          rbtwsRadioRssi }
    STATUS      deprecated
    DESCRIPTION
    "This trap is sent when a client authorizes.
    rbtwsClientAuthorizationSuccessTrap2 trap deprecates
    this trap."
    ::= { rbtwsTrapsV2 15 }

rbtwsClientDeAssociationTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsUserName,
          rbtwsClientSessionId,
          rbtwsClientMACAddress,
          rbtwsClientIp,
          rbtwsClientVLANName,
          rbtwsClientAuthServerIp,
          rbtwsClientAuthenProtocolType,
          rbtwsClientAccessType,
          rbtwsPortNum,
          rbtwsAPRadioNum,
          rbtwsDAPNum,
          rbtwsRadioSSID }
    STATUS      current
    DESCRIPTION
    "This trap is sent if a client de-association occurred."
    ::= { rbtwsTrapsV2 16 }

rbtwsClientRoamingTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsUserName,
          rbtwsClientSessionId,
          rbtwsClientMACAddress,
          rbtwsClientIp,
          rbtwsClientAccessType,
          rbtwsPortNum,
          rbtwsAPRadioNum,
          rbtwsDAPNum,
          rbtwsRadioSSID,
          rbtwsClientRoamedFromAccessType,
          rbtwsClientRoamedFromPortNum,
          rbtwsClientRoamedFromRadioNum,
          rbtwsClientRoamedFromDAPNum,
          rbtwsClientRoamedFromWsIp,
          rbtwsClientTimeSinceLastRoam }
    STATUS      current
    DESCRIPTION
    "This trap is sent if a client roams from one location to another."
    ::= { rbtwsTrapsV2 17 }

rbtwsAutoTuneRadioPowerChangeTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRadioMACAddress,
          rbtwsNewPowerLevel,
          rbtwsOldPowerLevel,
          rbtwsRadioPowerChangeReason,
          rbtwsRadioPowerChangeDescription }
    STATUS      current
    DESCRIPTION
    "This trap is sent if a radio's power level has changed based
    on auto-tune."
    ::= { rbtwsTrapsV2 18 }

rbtwsAutoTuneRadioChannelChangeTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRadioMACAddress,
          rbtwsNewChannelNum,
          rbtwsOldChannelNum,
          rbtwsChannelChangeReason }
    STATUS      current
    DESCRIPTION
    "This trap is sent if a radio's channel has changed based on auto-tune."
    ::= { rbtwsTrapsV2 19 }

rbtwsCounterMeasureStartTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRFDetectXmtrMacAddr,
          rbtwsRadioMACAddress }
    STATUS      current
    DESCRIPTION
    "This trap is sent when counter measures are started against a rogue.
    rbtwsRFDetectXmtrMacAddr is the mac address of the rogue we
    are doing counter measures against.
    rbtwsRadioMACAddress identifies the radio performing the countermeasures."
    ::= { rbtwsTrapsV2 20 }

rbtwsCounterMeasureStopTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRFDetectXmtrMacAddr,
          rbtwsRadioMACAddress }
    STATUS      current
    DESCRIPTION
    "This trap is sent when counter measures are stopped against a rogue.
    rbtwsRFDetectXmtrMacAddr is the mac address of the rogue we
    were doing counter measures against.
    rbtwsRadioMACAddress identifies the radio performing the countermeasures."
    ::= { rbtwsTrapsV2 21 }

rbtwsClientDot1xFailureTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsUserName,
          rbtwsClientMACAddress,
          rbtwsClientAuthenProtocolType,
          rbtwsClientAccessType,
          rbtwsDAPNum,
          rbtwsPortNum,
          rbtwsAPRadioNum,
          rbtwsRadioSSID,
          rbtwsClientDot1xState,
          rbtwsClientDot1xFailureCause,
          rbtwsClientFailureCauseDescription }
    STATUS      current
    DESCRIPTION
    "This trap is sent if a client failed 802.1X."
    ::= { rbtwsTrapsV2 22 }

rbtwsClientClearedTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsUserName,
          rbtwsClientSessionId,
          rbtwsClientMACAddress,
          rbtwsClientIp,
          rbtwsClientAccessType,
          rbtwsPortNum,
          rbtwsAPRadioNum,
          rbtwsDAPNum,
          rbtwsRadioSSID,
          rbtwsClientSessionElapsedTime,
          rbtwsLocalId}
    STATUS      current
    DESCRIPTION
    "This trap is sent when a client session is cleared."
    ::= { rbtwsTrapsV2 23 }

rbtwsClientAuthorizationSuccessTrap2 NOTIFICATION-TYPE
    OBJECTS     { rbtwsUserName,
          rbtwsClientSessionId,
          rbtwsClientMACAddress,
          rbtwsClientIp,
          rbtwsClientVLANName,
          rbtwsClientSessionState,
          rbtwsClientSessionStartTime,
          rbtwsClientAuthServerIp,
          rbtwsClientAuthenProtocolType,
          rbtwsClientAccessType,
          rbtwsPortNum,
          rbtwsAPRadioNum,
          rbtwsDAPNum,
          rbtwsRadioSSID,
          rbtwsUserAccessType,
          rbtwsLocalId }
    STATUS      current
    DESCRIPTION
    "This trap is sent when a client authorizes.
    This trap deprecates the rbtwsClientAuthorizationSuccessTrap."
    ::= { rbtwsTrapsV2 24 }

rbtwsRFDetectSpoofedMacAPTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRFDetectXmtrMacAddr,
          rbtwsRFDetectListenerListInfo }
    STATUS      current
    DESCRIPTION
    "This trap is sent when RF detection finds an AP using
    the MAC of the listener.
    rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon.
    rbtwsRFDetectListenerListInfo is a display string of a list of
    listener information."
    ::= { rbtwsTrapsV2 25 }

rbtwsRFDetectSpoofedSsidAPTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRFDetectXmtrMacAddr,
          rbtwsRFDetectListenerListInfo }
    STATUS      current
    DESCRIPTION
    "This trap is sent when RF detection finds an AP using
    the SSID of the listener, and the AP is not in the
    mobility domain.
    rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon.
    rbtwsRFDetectListenerListInfo is a display string of a list of
    listener information."
    ::= { rbtwsTrapsV2 26 }

rbtwsRFDetectDoSTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRFDetectDoSType,
          rbtwsRFDetectXmtrMacAddr,
          rbtwsRFDetectListenerListInfo }
    STATUS      current
    DESCRIPTION
    "This trap is sent when RF detection finds a denial
    of service (DoS) occurring.
    rbtwsRFDetectDoSType specifies the type of DoS.
    rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon.
    rbtwsRFDetectListenerListInfo is a display string of a list of
    listener information."
    ::= { rbtwsTrapsV2 27 }

rbtwsRFDetectClientViaRogueWiredAPTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsSourceWsIp,
          rbtwsPortNum,
          rbtwsClientVLANid,
          rbtwsClientVLANtag,
          rbtwsRFDetectXmtrMacAddr,
          rbtwsRFDetectListenerListInfo }
    STATUS      obsolete
    DESCRIPTION
    "This trap is sent when a client is detected that connected
    via a rogue AP that is attached to a wired port.
    rbtwsSourceWsIp is the IP address of the AC (switch) with the wired port.
    rbtwsPortNum is the port on the AC.
    rbtwsClientVLANid is the VLAN ID of the client's traffic.
    rbtwsClientVLANtag is the VLAN tag of the client's traffic.
    rbtwsRFDetectXmtrMacAddr is the MAC address of the client.
    rbtwsRFDetectListenerListInfo is a display string of a list of
    listener information.
    Obsoleted by rbtwsRFDetectClientViaRogueWiredAPTrap2."
    ::= { rbtwsTrapsV2 28 }

rbtwsRFDetectInterferingRogueAPTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRFDetectXmtrMacAddr,
          rbtwsRFDetectListenerListInfo }
    STATUS      current
    DESCRIPTION
    "This trap is sent when RF detection finds an interfering
    rogue AP.
    rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon.
    rbtwsRFDetectListenerListInfo is a display string of a list of
    listener information."
    ::= { rbtwsTrapsV2 29 }

rbtwsRFDetectInterferingRogueDisappearTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRFDetectXmtrMacAddr }
    STATUS      current
    DESCRIPTION
    "This trap is sent when an interfering rogue has disappeared.
    rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon."
    ::= { rbtwsTrapsV2 30 }

rbtwsRFDetectUnAuthorizedSsidTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRFDetectXmtrMacAddr,
          rbtwsRFDetectListenerListInfo }
    STATUS      current
    DESCRIPTION
    "This trap is sent when RF detection finds use of
    an unauthorized SSID.
    rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon.
    rbtwsRFDetectListenerListInfo is a display string of a list of
    listener information."
    ::= { rbtwsTrapsV2 31 }

rbtwsRFDetectUnAuthorizedOuiTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRFDetectXmtrMacAddr,
          rbtwsRFDetectListenerListInfo }
    STATUS      current
    DESCRIPTION
    "This trap is sent when RF detection finds use of
    an unauthorized OUI.
    rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon.
    rbtwsRFDetectListenerListInfo is a display string of a list of
    listener information."
    ::= { rbtwsTrapsV2 32 }

rbtwsRFDetectUnAuthorizedAPTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRFDetectXmtrMacAddr,
          rbtwsRFDetectListenerListInfo }
    STATUS      current
    DESCRIPTION
    "This trap is sent when RF detection finds operation
    of an unauthorized AP.
    rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon.
    rbtwsRFDetectListenerListInfo is a display string of a list of
    listener information."
    ::= { rbtwsTrapsV2 33 }

rbtwsDAPConnectWarningTrap NOTIFICATION-TYPE
    OBJECTS { rbtwsDeviceModel,
          rbtwsDeviceSerNum,
          rbtwsRsaPubKeyFingerPrint,
          rbtwsDAPconnectWarningType }
    STATUS      obsolete
    DESCRIPTION
    "A DAP, tried to connect to the AC.
    rbtwsDeviceModel provides the model of the DAP.
    rbtwsDeviceSerNum provides the serial number of the DAP.
    rbtwsRsaPubKeyFingerPrint provides the computed
        fingerprint of the DAP.
    rbtwsDAPconnectWarningType provides the type
        of connect warning.

    Replaced by rbtwsApNonOperStatusTrap,
    with rbtwsApTransition = 'connectFail'."
    ::= { rbtwsTrapsV2 34 }

rbtwsRFDetectDoSPortTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRFDetectDoSType,
          rbtwsRFDetectXmtrMacAddr,
          rbtwsClientAccessType,
          rbtwsPortNum,
          rbtwsDAPNum }
    STATUS      current
    DESCRIPTION
    "This trap is sent when RF detection finds a denial
    of service (DoS) occurring. This has port and
    AP info instead of 'Listener info'.
    rbtwsRFDetectDoSType specifies the type of DoS.
    rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon.
    rbtwsClientAccessType specifies whether wired, AP, or DAP.
    rbtwsPortNum (for wired or AP), the port that is used.
    rbtwsDAPNum (for a DAP), the ID of the DAP."
    ::= { rbtwsTrapsV2 35 }

rbtwsMpMichaelMICFailure2 NOTIFICATION-TYPE
    OBJECTS     { rbtwsPortNum,
          rbtwsAPRadioNum,
          rbtwsClientMACAddress,
          rbtwsClientMACAddress2 }
    STATUS      current
    DESCRIPTION
    "Two Michael MIC failures were seen within 60 seconds of
    each other. Object rbtwsClientMACAddress is the source
    of the first failure, and object rbtwsClientMACAddress2
    source of the second failure."
    ::= { rbtwsTrapsV2 36 }

rbtwsApNonOperStatusTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsDeviceSerNum,
          rbtwsAPMACAddress,
          rbtwsApAttachType,
          rbtwsApPortOrDapNum,
          rbtwsApName,
          rbtwsApTransition,
          rbtwsApFailDetail,
          rbtwsApWasOperational }
    STATUS      current
    DESCRIPTION
        "This trap is sent when the AP changes state
        and the new one is a non-operational state."
    ::= { rbtwsTrapsV2 37 }

rbtwsApOperRadioStatusTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsDeviceSerNum,
          rbtwsApAttachType,
          rbtwsApPortOrDapNum,
          rbtwsApName,
          rbtwsAPRadioNum,
          rbtwsRadioMACAddress,
          rbtwsRadioType,
          rbtwsRadioConfigState,
          rbtwsApConnectSecurityType,
          rbtwsApServiceAvailability }
    STATUS      current
    DESCRIPTION
        "This trap is sent when the Radio changes state.
        It also contains aggregate information about the AP
        in operational state - security level and service availability."
    ::= { rbtwsTrapsV2 38 }

rbtwsClientIpAddrChangeTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsUserName,
          rbtwsClientSessionId,
          rbtwsClientMACAddress,
          rbtwsClientIp,
          rbtwsClientVLANName,
          rbtwsClientSessionState,
          rbtwsClientAuthServerIp,
          rbtwsClientAuthenProtocolType,
          rbtwsClientAccessType,
          rbtwsPortNum,
          rbtwsAPRadioNum,
          rbtwsDAPNum,
          rbtwsRadioSSID,
          rbtwsUserAccessType,
          rbtwsLocalId,
          rbtwsClientIpAddrChangeReason }
    STATUS      current
    DESCRIPTION
        "This trap is sent when a client's IP address
        changes. The most likely case for this is when
        the client first connects to the network."
    ::= { rbtwsTrapsV2 39 }

rbtwsClientAssociationSuccessTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsClientMACAddress,
          rbtwsClientAccessType,
          rbtwsPortNum,
          rbtwsAPRadioNum,
          rbtwsDAPNum,
          rbtwsRadioSSID }
    STATUS      current
    DESCRIPTION
        "This trap is sent if a client association succeeds.
        WARNING: DO NOT enable it in normal use.
        It may impair switch performance!
        Only recommended for debugging network issues."
    ::= { rbtwsTrapsV2 40 }

rbtwsClientAuthenticationSuccessTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsClientMACAddress,
          rbtwsClientAccessType,
          rbtwsPortNum,
          rbtwsAPRadioNum,
          rbtwsDAPNum,
          rbtwsRadioSSID }
    STATUS      current
    DESCRIPTION
        "This trap is sent if a client authentication succeeds."
    ::= { rbtwsTrapsV2 41 }

rbtwsClientDeAuthenticationTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsUserName,
          rbtwsClientSessionId,
          rbtwsClientMACAddress,
          rbtwsClientIp,
          rbtwsClientVLANName,
          rbtwsClientAuthServerIp,
          rbtwsClientAuthenProtocolType,
          rbtwsClientAccessType,
          rbtwsPortNum,
          rbtwsAPRadioNum,
          rbtwsDAPNum,
          rbtwsRadioSSID }
    STATUS      current
    DESCRIPTION
        "This trap is sent if a client de-authentication occured."
    ::= { rbtwsTrapsV2 42 }

rbtwsRFDetectBlacklistedTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRFDetectXmtrMacAddr,
          rbtwsClientAccessType,
          rbtwsPortNum,
          rbtwsDAPNum,
          rbtwsBlacklistingRemainingTime,
          rbtwsBlacklistingCause }
    STATUS      current
    DESCRIPTION
        "This trap is sent if an association, re-association or de-association
        request (packet) is detected from a blacklisted transmitter 
        (identified by MAC: 'rbtwsRFDetectXmtrMacAddr').
        If 'rbtwsBlacklistingCause' is 'configured',
        then 'rbtwsBlacklistingRemainingTime' will be zero, meaning indefinite
        time (depending on administrative actions on the Black List).
        Otherwise, 'rbtwsBlacklistingRemainingTime' will indicate the time
        in seconds until this transmitter's requests could be allowed."
    ::= { rbtwsTrapsV2 43 }

rbtwsRFDetectClientViaRogueWiredAPTrap2 NOTIFICATION-TYPE
    OBJECTS     { rbtwsSourceWsIp,
          rbtwsPortNum,
          rbtwsClientVLANid,
          rbtwsClientVLANtag,
          rbtwsRFDetectXmtrMacAddr,
          rbtwsRFDetectListenerListInfo,
          rbtwsRFDetectRogueAPMacAddr }
    STATUS      current
    DESCRIPTION
        "This trap is sent when a client is detected that connected
        via a rogue AP that is attached to a wired port.
        rbtwsSourceWsIp is the IP address of the AC (switch)
        with the wired port.
        rbtwsPortNum is the port on the AC.
        rbtwsClientVLANid is the VLAN ID of the client's traffic.
        rbtwsClientVLANtag is the VLAN tag of the client's traffic.
        rbtwsRFDetectXmtrMacAddr is the MAC address of the client.
        rbtwsRFDetectListenerListInfo is a display string of a list of
        listener information.
        rbtwsRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired)
        the client is connected to.
        This trap obsoletes the rbtwsRFDetectClientViaRogueWiredAPTrap."
    ::= { rbtwsTrapsV2 44 }

rbtwsRFDetectAdhocUserDisappearTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsRFDetectXmtrMacAddr }
    STATUS      current
    DESCRIPTION
        "This trap is sent when RF detection sweep finds that
        an ad-hoc user disappeared.
        rbtwsRFDetectXmtrMacAddr is the MAC address of the ad-hoc user."
    ::= { rbtwsTrapsV2 45 }

rbtwsApRejectLicenseExceededTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsNumLicensedActiveAPs }
    STATUS      current
    DESCRIPTION
        "This trap is sent when an AC (wireless switch) receives a packet
        from an inactive AP and attaching that AP would make the AC
        exceed the maximum (licensed) number of active APs."
    ::= { rbtwsTrapsV2 46 }

rbtwsMobilityDomainFailOverTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsMobilityDomainSecondarySeedIp }
    STATUS      current
    DESCRIPTION
    "This trap is sent when the Mobility Domain fails over
    to the secondary seed."
    ::= { rbtwsTrapsV2 50 }

rbtwsMobilityDomainFailBackTrap NOTIFICATION-TYPE
    OBJECTS     { rbtwsMobilityDomainPrimarySeedIp }
    STATUS      current
    DESCRIPTION
    "This trap is sent when the Mobility Domain fails back
    to the primary seed."
    ::= { rbtwsTrapsV2 51 }


END