RBTWS-AP-TC DEFINITIONS ::= BEGIN IMPORTS Unsigned32, Integer32, MODULE-IDENTITY FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC rbtwsMibs FROM RBTWS-ROOT-MIB; rbtwsApTc MODULE-IDENTITY LAST-UPDATED "200607102335Z" ORGANIZATION "Enterasys Networks" CONTACT-INFO "www.enterasys.com" DESCRIPTION "Textual Conventions used by Enterasys Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent using these TCs. Copyright 2006 Enterasys Networks, Inc. All rights reserved. This SNMP Management Information Base Specification (Specification) embodies confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Enterasys Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." REVISION "200607100015Z" DESCRIPTION "v1.0.1: Disallow illegal RbtwsRadioRate values 1..9 while keeping zero (that means unknown rate)" REVISION "200603300014Z" DESCRIPTION "v1.0: Initial version, for 4.1 release" ::= { rbtwsMibs 3 } RbtwsAccessType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the access type used by client or an AP. Value 'ap(1)' indicates access point that is directly attached to the switch. Value 'dap(2)' indicates distributed access point with attachment to the switch through the intermediate network. Value 'wired(3)' indicates a client that is directly attached to the switch (no access point is involved)." SYNTAX INTEGER { ap (1), dap (2), wired (3) } RbtwsApAttachType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Type of AP attachment to AC." SYNTAX INTEGER { directAttach(1), -- informally known as "AP" networkAttach(2) -- informally known as "DAP" } RbtwsApPortOrDapNum ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "AP Port, for directly attached APs, otherwise DAP Number (arbitrary number assigned when configuring the DAP on the AC). A zero value means unknown." SYNTAX Unsigned32 (0..1000) RbtwsApState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "AP State, as seen by the AC." SYNTAX INTEGER { cleared (1), init (2), bootStarted (3), imageDownloaded (4), connectFailed (5), configuring (6), configured (7) } -- RbtwsApTransition TC used by 'rbtwsApNonOperStatusTrap' RbtwsApTransition ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "AP state Transition, as seen by the AC." SYNTAX INTEGER { clear (1), timeout (2), reset (3), bootSuccess (4), startConfiguring (5), connectFail (6) -- transition to operational state is reported by -- a different trap: 'rbtwsApOperRadioStatusTrap' } RbtwsApFailDetail ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Detailed failure codes for some of the transitions specified in 'RbtwsApTransition'." SYNTAX INTEGER { -- Detail code values for 'configFailed' transition. -- All 3 below cover 'rbtwsDAPConnectWarningTrap' trap. secureHandshakeFailure (2), fingerprintRequired (3), fingerprintMismatch (4), -- Detail code values for 'timeout' transition. -- Reports the state of the physical AC port -- this AP is attached to. -- For RM, it would cover the information -- given by the standard "Port Link Up/Down" traps. portLinkUp (11), portLinkDown (12), failUnknown (99) } RbtwsApConnectSecurityType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Security level of the connection between AP and AC: secure(1) - fingerprint matching; insecure(2) - fingerprint not configured, or optional and not matching; auto(3) - Auto-DAP is intrinsically insecure: could not check fingerprint since no specific DAP is configured." SYNTAX INTEGER { secure (1), insecure (2), auto (3) } RbtwsApServiceAvailability ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Level of wireless service availability." SYNTAX INTEGER { fullService (1), -- All radios operational on the AP. noService (2), -- No radio operational on the AP. degradedService (3) -- One radio down, one radio up. } RbtwsApBias ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Bias of AP attachment to this AC. Setting an APs bias on an AC switch to high causes the switch to be preferred over switches with low bias, for booting and managing the AP. Bias applies only to AC switches that are indirectly attached to the AP through an intermediate Layer 2 or Layer 3 network. An AP always attempts to boot on AP port 1 first, and if an AC switch is directly attached on AP port 1, the AP boots from it regardless of the bias settings." SYNTAX INTEGER { high(1), low(2) } RbtwsApSerialNum ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value is a zero length string if unknown or unavailable. Otherwise the value is a serial number, which consists of printable ASCII characters between 0x21 (!), and 0x7d (}) with no leading, embedded, or trailing space." SYNTAX OCTET STRING (SIZE (0..32)) RbtwsApFingerprint ::= TEXTUAL-CONVENTION DISPLAY-HINT "2x:" STATUS current DESCRIPTION "Represents a RSA key fingerprint (binary value), which is the MD5 hash of the public key of the RSA key pair. Or a zero length string if not known or unavailable." SYNTAX OCTET STRING (SIZE (0 | 16)) RbtwsRadioNum ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration for multi-radio APs." SYNTAX INTEGER { radio-1 (1), radio-2 (2), not-applicable (3) } RbtwsPowerLevel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The current level of transmit power expressed in dbm." SYNTAX Unsigned32 (1..18) RbtwsRadioPowerChangeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for why the power level was changed, which occurs due to auto-tune operation." SYNTAX INTEGER { dup-pkts-threshold-exceed (1), retransmit-threshold-exceed (2), clients-optimal-performance-reached (3), def-power-threshold-exceed (4) } RbtwsChannelChangeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for why the channel was changed, which occurs due to auto-tune operation" SYNTAX INTEGER { util-index (1), rexmit-pkt-offset (2), noise-offset (3), noise (4), utilization (5), phy-error-offset (6), crc-errors-offset (7), radar-detected (8) } -- contains hyphens due to historical reasons RbtwsChannelNum ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Channel Number" SYNTAX Unsigned32 (1..1024) RbtwsRadioEnable ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Radio mode (administratively enabled or disabled)." SYNTAX INTEGER { enabled (1), disabled (2) } RbtwsRadioConfigState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Radio Configuration State, as seen by the AC." SYNTAX INTEGER { configInit (1), configFail (2), configOk (3) } RbtwsRadioRate ::= TEXTUAL-CONVENTION DISPLAY-HINT "d-1" STATUS current DESCRIPTION "The possible transmission rates of an AP radio. Both a and b/g rates are covered; a specific radio will report the applicable transmission rates (either a or b/g). Here are the possible rates, in Mbps: - 802.11g radios: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, or 1; - 802.11b radios: 11, 5.5, 2, or 1; - 802.11a radios: 54, 48, 36, 24, 18, 12, 9, or 6. The value in MIB is specified as the rate in Mbps times 10, in order to have only integer values, zero meaning unknown rate." SYNTAX Unsigned32 (0 | 10..540) RbtwsRadioType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration to indicate the Radio Type, as seen by AC." SYNTAX INTEGER { typeUnknown (1), typeA (2), -- 802.11a typeB (3), -- 802.11b typeG (4) -- 802.11b+g } RbtwsRssi ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "RSSI (Received Signal Strength Indicator) for last packet received from this neighbor, in decibels referred to 1 milliwatt (dBm). A higher value indicates a stronger signal." SYNTAX Integer32 (-100..0) RbtwsApWasOperational ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration to indicate whether the AP was operational before a transition occured. Normally used in notifications." SYNTAX INTEGER { oper (1), nonOper (2) } END