CYCLADES-ACS-PM-MIB DEFINITIONS ::= BEGIN

IMPORTS
	cyACSMgmt
		FROM CYCLADES-ACS-MIB
	OBJECT-TYPE, MODULE-IDENTITY, Integer32
		FROM SNMPv2-SMI
	InterfaceIndex, InterfaceIndexOrZero
		FROM IF-MIB
	DisplayString
		FROM SNMPv2-TC;

cyPM   MODULE-IDENTITY
	LAST-UPDATED	"200508290000Z"
	ORGANIZATION	"Cyclades Corporation"
	CONTACT-INFO	"postal : Cyclades Corporation
				  3541 Gateway Boulevard
				  Fremont, CA 94538, USA
			 e-mail : Technical Support
				  support@cyclades.com"
	DESCRIPTION	"This module defines objects of the Proxy for PM "
	REVISION	"200508290000Z"
	DESCRIPTION	"Changed the Contact-Info"
	REVISION	"200310170000Z"
	DESCRIPTION	"First Draft"
::= { cyACSMgmt 5 }

cyNumberOfPM		OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The total number of PM's connected on the unit"
::= { cyPM 1 }
 
cyPMTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF CyPMEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Allows to read information about each connected PM"
::= { cyPM 2 }

cyPMEntry	OBJECT-TYPE
	SYNTAX		CyPMEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Information about the connected PM"
	INDEX		{ cyPMSerialPortNumber }
::= { cyPMTable 1 }

CyPMEntry ::= SEQUENCE  {
	cyPMSerialPortNumber	InterfaceIndex,     
	cyPMNumberOutlets Integer32,
	cyPMNumberUnits	Integer32,
	cyPMCurrent	DisplayString,
	cyPMVersion	DisplayString,
	cyPMTemperature	DisplayString,
	cyPMCommand	DisplayString
}

cyPMSerialPortNumber	OBJECT-TYPE
	SYNTAX		InterfaceIndex	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The number of the serial port when the PM is connected."
::= { cyPMEntry 1 }

cyPMNumberOutlets	OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Number of outlets."
::= { cyPMEntry 2 }

cyPMNumberUnits		OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Total number of PM unists that are accessed by this 
			serial port."
::= { cyPMEntry 3 }

cyPMCurrent	OBJECT-TYPE
	SYNTAX		DisplayString	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Current reading for the PM."
::= { cyPMEntry 4 }

cyPMVersion	OBJECT-TYPE
	SYNTAX		DisplayString	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The software version of the PM."
::= { cyPMEntry 5 }

cyPMTemperature	OBJECT-TYPE
	SYNTAX		DisplayString	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The PM temperature."
::= { cyPMEntry 6 }

cyPMCommand		OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (1..100))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"A character string for the user to send commands to
			PM. He can use it to does the save command.
			Or to list the outlets that need to be turned off, 
			or turned on , or cycled or locked or unlocked as a 
			group. The command is the first word and is followed 
			by a space and the outlet list (otulets commands). 
			Valid commands are 'on', 'off', 'cycle', 'lock',
			'unlock', 'save'."
::= { cyPMEntry 7 }

cyPMUnitTable	OBJECT-TYPE
	SYNTAX		SEQUENCE OF CyPMUnitEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Allow operations on specific PM unit connected"
::= { cyPM 3 }

cyPMUnitEntry	OBJECT-TYPE
	SYNTAX		CyPMUnitEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Allow operations on outlet"
	INDEX		{ cyPMSerialPortNumber, cyPMUnitNumber }
::= { cyPMUnitTable 1 }

CyPMUnitEntry ::= SEQUENCE  {
	cyPMUnitNumber		InterfaceIndex,     
	cyPMUnitVersion		DisplayString,
	cyPMUnitOutlets		Integer32,
	cyPMUnitFirstOutlet 	Integer32,
	cyPMUnitCurrent		Integer32,
	cyPMUnitMaxCurrent 	Integer32,
	cyPMUnitTemperature 	Integer32,
	cyPMUnitMaxTemperature 	Integer32
}

cyPMUnitNumber	OBJECT-TYPE
	SYNTAX		InterfaceIndex	
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"The number of the PM unit in the daisy-chained mode."
::= { cyPMUnitEntry 1 }

cyPMUnitVersion	OBJECT-TYPE
	SYNTAX		DisplayString	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The software version of this PM unit."
::= { cyPMUnitEntry 2 }

cyPMUnitOutlets	OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Number of outlets of this PM unit."
::= { cyPMUnitEntry 3 }

cyPMUnitFirstOutlet	OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Number of the first outlet of this PM unit."
::= { cyPMUnitEntry 4 }

cyPMUnitCurrent	OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Current of this PM unit in AMP.
			The value of this object is the actual current in 
                        AMP * 10. You need to translate the readed value
                        (Ex. : value is 5, the current is 0.5 AMP.)" 
::= { cyPMUnitEntry 5 }

cyPMUnitMaxCurrent	OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Maximum current of this PM unit in AMP.
			The value of this object is the maximum current in 
                        AMP * 10. You need to translate the readed value
                        (Ex. : value is 5, the maximum current is 0.5 AMP.)" 
::= { cyPMUnitEntry 6 }

cyPMUnitTemperature	OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Temperature of this PM unit in Celsius degrees.
			The value of this object is the actual temperature in 
                        degrees C * 10. You need to translate the readed value
                        (Ex. : value is 240, the temperature is 24 Celsius.) 
			If the temperature measurement is not installed this 
			value will be 0.
                        Valid values are 5 to 999 ( 0.5 to 99.9 Celsius)."
::= { cyPMUnitEntry 7 }

cyPMUnitMaxTemperature	OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Maximum temperature value of this PM unit in Celsius 
			degrees. The value of this object is the maximum 
			temperature in degrees C * 10. You need to translate 
			the readed value(Ex. : value is 240, the maximum
			temperature is 24 Celsius). 
			If the temperature measurement is not installed this 
			value will be 0.
                        Valid values are 5 to 999 ( 0.5 to 99.9 Celsius)."
::= { cyPMUnitEntry 8 }

cyOutletTable	OBJECT-TYPE
	SYNTAX		SEQUENCE OF CyOutletEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Allow operations on outlet"
::= { cyPM 4 }

cyOutletEntry	OBJECT-TYPE
	SYNTAX		CyOutletEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Allow operations on outlet"
	INDEX		{ cyPMSerialPortNumber, cyOutletNumber }
::= { cyOutletTable 1 }

CyOutletEntry ::= SEQUENCE  {
	cyOutletNumber	InterfaceIndexOrZero,     
	cyOutletName	DisplayString,
	cyOutletServer	DisplayString,
	cyOutletPower	INTEGER,
	cyOutletLock	INTEGER,
	cyOutletPUInterval Integer32
}

cyOutletNumber	OBJECT-TYPE
	SYNTAX		InterfaceIndexOrZero	
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"The outlet number on the PM. Zero is ALL outlets."
::= { cyOutletEntry 1 }

cyOutletName OBJECT-TYPE
	SYNTAX		DisplayString (SIZE(1 .. 8))	
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The name given to a particular outlet Maximum size is 8 characters."
::= { cyOutletEntry 2 }

cyOutletServer OBJECT-TYPE
	SYNTAX		DisplayString 	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Alias of the Server connected to this outlet ."
::= { cyOutletEntry 3 }

cyOutletPower	OBJECT-TYPE
	SYNTAX	INTEGER {
			off	(0),
			on	(1),
			cycle	(2),
			unknow  (3)
		}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Getting this object will return the power state of
			the outlet. Valid return states are UNKNOW, OFF and
			ON. Setting this object will change the power state 
			of the outlet."
::= { cyOutletEntry 4 }

cyOutletLock	OBJECT-TYPE
	SYNTAX	INTEGER {
			unlock	(0),
			lock	(1),
			unknow 	(2)
		}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Getting this object will return the lock state of
			the outlet. Setting this object will change the 
			lock state of the outlet."
::= { cyOutletEntry 5 }

cyOutletPUInterval	OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The power unit interval of this outlet in seconds.
			The value of this object is the actual interval in 
                        seconds * 10. You need to translate the readed value
                        (Ex. : value is 5, the interval is 0.5 seconds.)" 
::= { cyOutletEntry 6 }

END