-- ArubaOS 3.2.0.0_16376 -- vim:set ts=4 sw=4: WLSX-WLAN-MIB DEFINITIONS ::= BEGIN IMPORTS TEXTUAL-CONVENTION, MODULE-IDENTITY, OBJECT-TYPE, snmpModules, Integer32, Unsigned32, Counter32, IpAddress, NOTIFICATION-TYPE FROM SNMPv2-SMI TDomain, DisplayString, PhysAddress, TAddress, TimeInterval, RowStatus, StorageType, TestAndIncr, MacAddress, TruthValue FROM SNMPv2-TC ArubaEnableValue, ArubaFrameType, ArubaActiveState, ArubaRogueApType, ArubaAuthenticationMethods, ArubaEncryptionMethods, ArubaPhyType, ArubaVoipProtocolType, ArubaVlanValidRange, ArubaAccessPointMode, ArubaAPStatus, ArubaEnet1Mode, ArubaUnprovisionedStatus, ArubaMonitorMode, ArubaAntennaSetting, ArubaMeshRole FROM ARUBA-TC OBJECT-GROUP FROM SNMPv2-CONF wlsxEnterpriseMibModules FROM ARUBA-MIB; wlsxWlanMIB MODULE-IDENTITY LAST-UPDATED "0707312233Z" ORGANIZATION "Aruba Wireless Networks" CONTACT-INFO "Postal: 1322 Crossman Avenue Sunnyvale, CA 94089 E-mail: dl-support@arubanetworks.com Phone: +1 408 227 4500" DESCRIPTION "This MIB module defines MIB objects which provide information about the Wireless Management System (WMS) in the Aruba Controller." REVISION "0707312233Z" DESCRIPTION "The initial revision." ::= { wlsxEnterpriseMibModules 5 } wlsxWlanConfigGroup OBJECT IDENTIFIER ::= { wlsxWlanMIB 1 } wlsxWlanStateGroup OBJECT IDENTIFIER ::= { wlsxWlanMIB 2 } wlsxWlanStatsGroup OBJECT IDENTIFIER ::= { wlsxWlanMIB 3 } -- wlsxWlanAccessPointInfoGroup contains a Local Access Point Information Table. -- which lists all the APs connected to the controller, a Global AP Info Table -- which lists all the APs in the Aruba Domain. The Global table is valid only -- on the Master controller. The Group also contains two scalar objects which -- indicate the total number of APs and the total number of Clients connected. wlsxWlanAccessPointInfoGroup OBJECT IDENTIFIER ::= { wlsxWlanStateGroup 1 } wlsxWlanStationInfoGroup OBJECT IDENTIFIER ::= { wlsxWlanStateGroup 2 } wlsxWlanAssociationInfoGroup OBJECT IDENTIFIER ::= { wlsxWlanStateGroup 3 } wlsxWlanAccessPointStatsGroup OBJECT IDENTIFIER ::= { wlsxWlanStatsGroup 1 } wlsxWlanStationStatsGroup OBJECT IDENTIFIER ::= { wlsxWlanStatsGroup 2 } wlsxWlanTotalNumAccessPoints OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Total Number of Access Points connected to the controller. " ::= { wlsxWlanAccessPointInfoGroup 1 } wlsxWlanTotalNumStationsAssociated OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Total Number of Stations Associated to the controller. " ::= { wlsxWlanAccessPointInfoGroup 2 } -- AP Group Table wlsxWlanAPGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF WlanAPGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Table lists all the Access Points Groups configured in the Aruba controller. " ::= { wlsxWlanAccessPointInfoGroup 3 } wlsxWlanAPGroupEntry OBJECT-TYPE SYNTAX WlanAPGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "AP Group Entry" INDEX {wlanAPGroup} ::= { wlsxWlanAPGroupTable 1 } WlanAPGroupEntry ::= SEQUENCE { wlanAPGroup DisplayString, wlanAPNumAps Integer32 } wlanAPGroup OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION " The name of an AP group " ::= { wlsxWlanAPGroupEntry 1 } wlanAPNumAps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of APs in the AP Group " ::= { wlsxWlanAPGroupEntry 2 } -- AP Table wlsxWlanAPTable OBJECT-TYPE SYNTAX SEQUENCE OF WlanAPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table lists all the Access Points connected to the controller. " ::= { wlsxWlanAccessPointInfoGroup 4 } wlsxWlanAPEntry OBJECT-TYPE SYNTAX WlanAPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Access Point Entry" INDEX {wlanAPMacAddress} ::= { wlsxWlanAPTable 1 } WlanAPEntry ::= SEQUENCE { wlanAPMacAddress MacAddress, wlanAPIpAddress IpAddress, wlanAPName DisplayString, wlanAPGroupName DisplayString, wlanAPModel OBJECT IDENTIFIER, wlanAPSerialNumber DisplayString, wlanAPdot11aAntennaGain Integer32, wlanAPdot11gAntennaGain Integer32, wlanAPNumRadios Integer32, wlanAPEnet1Mode ArubaEnet1Mode, wlanAPIpsecMode ArubaEnableValue, wlanAPUpTime TimeTicks, wlanAPModelName DisplayString, wlanAPLocation DisplayString, wlanAPBuilding Integer32, wlanAPFloor Integer32, wlanAPLoc Integer32, wlanAPExternalAntenna ArubaAntennaSetting, wlanAPStatus ArubaAPStatus, wlanAPNumBootstraps Integer32, wlanAPNumReboots Integer32, wlanAPUnprovisioned ArubaUnprovisionedStatus, wlanAPMonitorMode ArubaMonitorMode, wlanAPFQLNBuilding DisplayString, wlanAPFQLNFloor DisplayString, wlanAPFQLN DisplayString, wlanAPFQLNCampus DisplayString, wlanAPLongitude DisplayString, wlanAPLatitude DisplayString, wlanAPAltitude DisplayString, wlanAPMeshRole ArubaMeshRole } wlanAPMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " Ethernet MAC Address of the Access Point " ::= { wlsxWlanAPEntry 1 } wlanAPIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " IP Address of the Access Point " ::= { wlsxWlanAPEntry 2 } wlanAPName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Host name of the Access Point. " ::= { wlsxWlanAPEntry 3 } wlanAPGroupName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Group Name of the Access Point. " ::= { wlsxWlanAPEntry 4 } wlanAPModel OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION " Sys OID of the Access Point. " ::= { wlsxWlanAPEntry 5 } wlanAPSerialNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION " Serial Number of the Access Point. " ::= { wlsxWlanAPEntry 6 } wlanAPdot11aAntennaGain OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Configured antenna gain for 'A' Radio. " ::= { wlsxWlanAPEntry 7 } wlanAPdot11gAntennaGain OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Configured antenna gain for 'G' Radio. " ::= { wlsxWlanAPEntry 8 } wlanAPNumRadios OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of Radios in the Access Point. " ::= { wlsxWlanAPEntry 9 } wlanAPEnet1Mode OBJECT-TYPE SYNTAX ArubaEnet1Mode MAX-ACCESS read-only STATUS current DESCRIPTION " Enet1 Mode of the Access Point. " ::= { wlsxWlanAPEntry 10 } wlanAPIpsecMode OBJECT-TYPE SYNTAX ArubaEnableValue MAX-ACCESS read-only STATUS current DESCRIPTION " IPSEC Mode of the Access Point. " ::= { wlsxWlanAPEntry 11 } wlanAPUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " Time (in hundredths of seconds) since the last time the Access Point bootstrapped with the controller. " ::= { wlsxWlanAPEntry 12 } wlanAPModelName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Model name of the Access Point. " ::= { wlsxWlanAPEntry 13 } wlanAPLocation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Location of the Access Point. " ::= { wlsxWlanAPEntry 14 } wlanAPBuilding OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " AP Building Number. " ::= { wlsxWlanAPEntry 15 } wlanAPFloor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " AP Floor Number. " ::= { wlsxWlanAPEntry 16 } wlanAPLoc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " AP Location. " ::= { wlsxWlanAPEntry 17 } wlanAPExternalAntenna OBJECT-TYPE SYNTAX ArubaAntennaSetting MAX-ACCESS read-only STATUS current DESCRIPTION " AP Antenna Status. " ::= { wlsxWlanAPEntry 18 } wlanAPStatus OBJECT-TYPE SYNTAX ArubaAPStatus MAX-ACCESS read-only STATUS current DESCRIPTION " AP Status. " ::= { wlsxWlanAPEntry 19 } wlanAPNumBootstraps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of times the AP has bootstrapped with the controller. " ::= { wlsxWlanAPEntry 20 } wlanAPNumReboots OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of times the AP has rebooted. " ::= { wlsxWlanAPEntry 21 } wlanAPUnprovisioned OBJECT-TYPE SYNTAX ArubaUnprovisionedStatus MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates whether the AP is unprovisioned due to lack of antenna gain or location code settings. " ::= { wlsxWlanAPEntry 22 } wlanAPMonitorMode OBJECT-TYPE SYNTAX ArubaMonitorMode MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates whether any radio on this AP is acting as an air monitor. " ::= { wlsxWlanAPEntry 23 } wlanAPFQLNBuilding OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The building component of the AP's FQLN. " ::= { wlsxWlanAPEntry 24 } wlanAPFQLNFloor OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The floor component of the AP's FQLN. " ::= { wlsxWlanAPEntry 25 } wlanAPFQLN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " The AP's Fully Qualified Location Name (FQLN). " ::= { wlsxWlanAPEntry 26 } wlanAPFQLNCampus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The campus component of the AP's FQLN. " ::= { wlsxWlanAPEntry 27 } wlanAPLongitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Longitude of the AP. Signed floating-point value. " ::= { wlsxWlanAPEntry 28 } wlanAPLatitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Latitude of the AP. Signed floating-point value. " ::= { wlsxWlanAPEntry 29 } wlanAPAltitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Altitude of the AP. Signed floating-point value. " ::= { wlsxWlanAPEntry 30 } wlanAPMeshRole OBJECT-TYPE SYNTAX ArubaMeshRole MAX-ACCESS read-write STATUS current DESCRIPTION " AP Mesh role " ::= { wlsxWlanAPEntry 31 } -- Radio table is indexed by the Mac Address of the AP and the type of the -- radio. wlsxWlanRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF WlanRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table lists all the radios known to the controller. " ::= { wlsxWlanAccessPointInfoGroup 5 } wlsxWlanRadioEntry OBJECT-TYPE SYNTAX WlanRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "AP Radio Entry" INDEX {wlanAPMacAddress, wlanAPRadioNumber} ::= { wlsxWlanRadioTable 1 } WlanRadioEntry ::= SEQUENCE { wlanAPRadioNumber Integer32, wlanAPRadioType ArubaPhyType, wlanAPRadioChannel Integer32, wlanAPRadioTransmitPower Integer32, wlanAPRadioMode ArubaAccessPointMode, wlanAPRadioUtilization Integer32, wlanAPRadioNumAssociatedClients Integer32, wlanAPRadioNumMonitoredClients Integer32, wlanAPRadioNumActiveBSSIDs Integer32, wlanAPRadioNumMonitoredBSSIDs Integer32, wlanAPRadioBearing DisplayString, wlanAPRadioTiltAngle DisplayString } wlanAPRadioNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " The radio number " ::= { wlsxWlanRadioEntry 1 } wlanAPRadioType OBJECT-TYPE SYNTAX ArubaPhyType MAX-ACCESS read-write STATUS current DESCRIPTION " Type of the Radio " ::= { wlsxWlanRadioEntry 2 } wlanAPRadioChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The channel the radio is currently operating on. " ::= { wlsxWlanRadioEntry 3 } wlanAPRadioTransmitPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The current power level of the radio. " ::= { wlsxWlanRadioEntry 4 } wlanAPRadioMode OBJECT-TYPE SYNTAX ArubaAccessPointMode MAX-ACCESS read-only STATUS current DESCRIPTION " The Mode in which the radio is operating. " ::= { wlsxWlanRadioEntry 5 } wlanAPRadioUtilization OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The Utilization of the radio as a percentage of the total capacity. " ::= { wlsxWlanRadioEntry 6 } wlanAPRadioNumAssociatedClients OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Clients associated to this radio. " ::= { wlsxWlanRadioEntry 7 } wlanAPRadioNumMonitoredClients OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Clients this Radio is monitoring. " ::= { wlsxWlanRadioEntry 8 } wlanAPRadioNumActiveBSSIDs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of active BSSIDs on this Radio. " ::= { wlsxWlanRadioEntry 9 } wlanAPRadioNumMonitoredBSSIDs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of AP BSSIDs this radio is monitoring. " ::= { wlsxWlanRadioEntry 10 } wlanAPRadioBearing OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Antenna Bearing in degrees from True North. Unsigned floating-point value. Range: 0-360. " ::= { wlsxWlanRadioEntry 11 } wlanAPRadioTiltAngle OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Tilt angle of antenna in degrees. -ve for downtilt, +ve for uptilt. Signed floating-point value. Range: -90 to +90. " ::= { wlsxWlanRadioEntry 12 } -- Local Access Point Table. wlsxWlanAPBssidTable OBJECT-TYPE SYNTAX SEQUENCE OF WlanAPBssidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table lists all the BSSIDs active on this controller. " ::= { wlsxWlanAccessPointInfoGroup 7 } wlsxWlanAPBssidEntry OBJECT-TYPE SYNTAX WlanAPBssidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BSSID Entry" INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} ::= { wlsxWlanAPBssidTable 1 } WlanAPBssidEntry ::= SEQUENCE { wlanAPBSSID MacAddress, wlanAPESSID DisplayString, wlanAPBssidSlot Unsigned32, wlanAPBssidPort Unsigned32, wlanAPBssidPhyType ArubaPhyType, wlanAPBssidRogueType ArubaRogueApType, wlanAPBssidMode INTEGER, wlanAPBssidChannel INTEGER, wlanAPBssidUpTime TimeTicks, wlanAPBssidInactiveTime TimeTicks, wlanAPBssidLoadBalancing TruthValue, wlanAPBssidNumAssociatedStations Unsigned32, wlanAPBssidAPMacAddress MacAddress, wlanAPBssidPhyNumber Integer32 } wlanAPBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " The MAC address of the Access Point. " ::= { wlsxWlanAPBssidEntry 1 } wlanAPESSID OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION " ESSID this BSSID is advertising. " ::= { wlsxWlanAPBssidEntry 2 } wlanAPBssidSlot OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Slot to which the Access Point is connected. " ::= { wlsxWlanAPBssidEntry 3 } wlanAPBssidPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Port to which the Access Point is connected. " ::= { wlsxWlanAPBssidEntry 4 } wlanAPBssidPhyType OBJECT-TYPE SYNTAX ArubaPhyType MAX-ACCESS read-only STATUS current DESCRIPTION " Physical Layer Protocol support of the AP. " ::= { wlsxWlanAPBssidEntry 5 } wlanAPBssidRogueType OBJECT-TYPE SYNTAX ArubaRogueApType MAX-ACCESS read-only STATUS current DESCRIPTION " The type of the Rogue. " ::= { wlsxWlanAPBssidEntry 6 } wlanAPBssidMode OBJECT-TYPE SYNTAX INTEGER{ ap(1), am(2), mpp(3), mp(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates whether the Access point is an Air Monitor or regular AP or Mesh Portal or Mesh Point. " ::= { wlsxWlanAPBssidEntry 7 } wlanAPBssidChannel OBJECT-TYPE SYNTAX INTEGER(1..165) MAX-ACCESS read-only STATUS current DESCRIPTION " The current operating channel. " ::= { wlsxWlanAPBssidEntry 8 } wlanAPBssidUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " Time (in hundredths of seconds) since the tunnel was created between the access point and controller " ::= { wlsxWlanAPBssidEntry 9 } wlanAPBssidInactiveTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " Time (in hundredths of seconds) since any activity took place on the BSSID. " ::= { wlsxWlanAPBssidEntry 10 } wlanAPBssidLoadBalancing OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates whether load balancing is enabled or not. " ::= { wlsxWlanAPBssidEntry 11 } wlanAPBssidNumAssociatedStations OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the number of stations associated to this BSSID. " ::= { wlsxWlanAPBssidEntry 12 } wlanAPBssidAPMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the Access Point to which this BSSID belongs. " ::= { wlsxWlanAPBssidEntry 13 } wlanAPBssidPhyNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the radio number to which this BSSID belongs. " ::= { wlsxWlanAPBssidEntry 14 } -- ESSID Table wlsxWlanESSIDTable OBJECT-TYPE SYNTAX SEQUENCE OF WlanESSIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Table lists all the ESSIDs advertised by this controller. " ::= { wlsxWlanAccessPointInfoGroup 8 } wlsxWlanESSIDEntry OBJECT-TYPE SYNTAX WlanESSIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ESSID Entry" INDEX {wlanESSID} ::= { wlsxWlanESSIDTable 1 } WlanESSIDEntry ::= SEQUENCE { wlanESSID DisplayString, wlanESSIDNumStations Unsigned32, wlanESSIDNumAccessPointsUp Unsigned32, wlanESSIDNumAccessPointsDown Unsigned32, wlanESSIDEncryptionType ArubaEncryptionMethods } wlanESSID OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION " The ESSID being advertised. " ::= { wlsxWlanESSIDEntry 1 } wlanESSIDNumStations OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of stations connected to this ESSID. " ::= { wlsxWlanESSIDEntry 2 } wlanESSIDNumAccessPointsUp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of APs currently advertising this ESSID. " ::= { wlsxWlanESSIDEntry 3 } wlanESSIDNumAccessPointsDown OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of APs configured to advertise this ESSID that are not currently operational. " ::= { wlsxWlanESSIDEntry 4 } wlanESSIDEncryptionType OBJECT-TYPE SYNTAX ArubaEncryptionMethods MAX-ACCESS read-only STATUS current DESCRIPTION " The encryption methods supported on this ESSID. " ::= { wlsxWlanESSIDEntry 5 } -- ESSID Vlan Pool Table wlsxWlanESSIDVlanPoolTable OBJECT-TYPE SYNTAX SEQUENCE OF WlanESSIDVlanPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Table lists all the VLANs associated with this ESSID. " ::= { wlsxWlanAccessPointInfoGroup 9 } wlsxWlanESSIDVlanPoolEntry OBJECT-TYPE SYNTAX WlanESSIDVlanPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ESSID Vlan Pool Entry" INDEX {wlanESSID, wlanESSIDVlanId} ::= { wlsxWlanESSIDVlanPoolTable 1 } WlanESSIDVlanPoolEntry ::= SEQUENCE { wlanESSIDVlanId Unsigned32, wlanESSIDVlanPoolStatus RowStatus } wlanESSIDVlanId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " VLAN which is part of the VLAN pool for this ESSID. " ::= { wlsxWlanESSIDVlanPoolEntry 1 } wlanESSIDVlanPoolStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Row status object used to indicate the status of the row. " ::= { wlsxWlanESSIDVlanPoolEntry 2 } --Station Info Group contains the State information for the stations. --Station Table contains all the station associated with an AP. wlsxWlanStationTable OBJECT-TYPE SYNTAX SEQUENCE OF WlanStationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Table lists all the wireless stations associated with the Access points connected to this controller. " ::= { wlsxWlanStationInfoGroup 1} wlsxWlanStationEntry OBJECT-TYPE SYNTAX WlanStationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Station Entry" INDEX {wlanStaPhyAddress} ::= { wlsxWlanStationTable 1 } WlanStationEntry ::= SEQUENCE { wlanStaPhyAddress MacAddress, wlanStaApBssid MacAddress, wlanStaPhyType ArubaPhyType, wlanStaIsAuthenticated TruthValue, wlanStaIsAssociated TruthValue, wlanStaChannel INTEGER, wlanStaVlanId ArubaVlanValidRange, wlanStaVOIPState TruthValue, wlanStaVOIPProtocol ArubaVoipProtocolType, wlanStaTransmitRate Unsigned32, wlanStaAssociationID Unsigned32, wlanStaAccessPointESSID DisplayString, wlanStaPhyNumber Integer32, wlanStaRSSI Integer32, wlanStaUpTime TimeTicks } wlanStaPhyAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Physical Address of the Station. " ::= { wlsxWlanStationEntry 1 } wlanStaApBssid OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Access point to which this station last associated to. " ::= { wlsxWlanStationEntry 2 } wlanStaPhyType OBJECT-TYPE SYNTAX ArubaPhyType MAX-ACCESS read-only STATUS current DESCRIPTION " Type of the Station. " ::= { wlsxWlanStationEntry 3 } wlanStaIsAuthenticated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates whether the station is authenticated. " ::= { wlsxWlanStationEntry 4 } wlanStaIsAssociated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates whether the station is associated. " ::= { wlsxWlanStationEntry 5 } wlanStaChannel OBJECT-TYPE SYNTAX INTEGER(1..165) MAX-ACCESS read-only STATUS current DESCRIPTION " Channel on which the station is associated. " ::= { wlsxWlanStationEntry 6 } wlanStaVlanId OBJECT-TYPE SYNTAX ArubaVlanValidRange MAX-ACCESS read-only STATUS current DESCRIPTION " VLAN in which the station is present. " ::= { wlsxWlanStationEntry 7 } wlanStaVOIPState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " The State of VoIP for this station. " ::= { wlsxWlanStationEntry 8 } wlanStaVOIPProtocol OBJECT-TYPE SYNTAX ArubaVoipProtocolType MAX-ACCESS read-only STATUS current DESCRIPTION " If VoIP is enabled, the type of the protocol supported. " ::= { wlsxWlanStationEntry 9 } wlanStaTransmitRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Transmit rate with which the Station is associated with this system. " ::= { wlsxWlanStationEntry 10 } wlanStaAssociationID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " AID with which the Station is associated with this system. " ::= { wlsxWlanStationEntry 11 } wlanStaAccessPointESSID OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION " ESSID of the Access point " ::= { wlsxWlanStationEntry 12 } wlanStaPhyNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Radio PHY number to which the station is associated " ::= { wlsxWlanStationEntry 13 } wlanStaRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Signal to Noise ratio for the station. " ::= { wlsxWlanStationEntry 14 } wlanStaUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " Time since the station associated to the current BSSID. " ::= { wlsxWlanStationEntry 15 } --Station Association Failure Table contains all the Stations that failed to --associate an ap. wlsxWlanStaAssociationFailureTable OBJECT-TYPE SYNTAX SEQUENCE OF WlanStaAssociationFailureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Table lists all the stations and the BSSID's to which they failed to associate. Once's a station succefully associates, association failure entries are not reported for that station. " ::= { wlsxWlanStationInfoGroup 2} wlsxWlanStaAssociationFailureEntry OBJECT-TYPE SYNTAX WlanStaAssociationFailureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Station Association Failure Entry" INDEX {wlanStaPhyAddress, wlanAPBSSID} ::= { wlsxWlanStaAssociationFailureTable 1 } WlanStaAssociationFailureEntry ::= SEQUENCE { wlanStaAssocFailureApName DisplayString, wlanStaAssocFailureApEssid DisplayString, wlanStaAssocFailurePhyNum Integer32, wlanStaAssocFailurePhyType ArubaPhyType, wlanStaAssocFailureElapsedTime TimeTicks, wlanStaAssocFailureReason DisplayString } wlanStaAssocFailureApName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION " Name of the Access Point to which this station tried to associate. " ::= { wlsxWlanStaAssociationFailureEntry 1 } wlanStaAssocFailureApEssid OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION " ESSID to which the station association failed. " ::= { wlsxWlanStaAssociationFailureEntry 2 } wlanStaAssocFailurePhyNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Radio PHY number to which the station tried to associate. " ::= { wlsxWlanStaAssociationFailureEntry 3 } wlanStaAssocFailurePhyType OBJECT-TYPE SYNTAX ArubaPhyType MAX-ACCESS read-only STATUS current DESCRIPTION " Radio PHY Type of the Station. " ::= { wlsxWlanStaAssociationFailureEntry 4 } wlanStaAssocFailureElapsedTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " Elapsed time in timeticks after the station's failure to associate. " ::= { wlsxWlanStaAssociationFailureEntry 5 } wlanStaAssocFailureReason OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION " Reason for the Station association failure " ::= { wlsxWlanStaAssociationFailureEntry 6 } -- Stats group contains tables for station statistics, BSSID statistics and -- AP statistics. wlsxWlanAPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlanAPStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Table lists the statistics of all the Access Points connected to the controller. " ::= { wlsxWlanAccessPointStatsGroup 1 } wlsxWlanAPStatsEntry OBJECT-TYPE SYNTAX WlanAPStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Access Point Stats entry" INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} ::= { wlsxWlanAPStatsTable 1 } WlanAPStatsEntry ::= SEQUENCE { wlanAPCurrentChannel Unsigned32, wlanAPNumClients Integer32, wlanAPTxPkts Counter32, wlanAPTxBytes Counter32, wlanAPRxPkts Counter32, wlanAPRxBytes Counter32, wlanAPTxDeauthentications Counter32, wlanAPRxDeauthentications Counter32, wlanAPChannelThroughput Integer32, wlanAPFrameRetryRate Integer32, wlanAPFrameLowSpeedRate Integer32, wlanAPFrameNonUnicastRate Integer32, wlanAPFrameFragmentationRate Integer32, wlanAPFrameBandwidthRate Integer32, wlanAPFrameRetryErrorRate Integer32, wlanAPChannelErrorRate Integer32, wlanAPFrameReceiveErrorRate Integer32, wlanAPRxDataPkts Counter32, wlanAPRxDataBytes Counter32, wlanAPTxDataPkts Counter32, wlanAPTxDataBytes Counter32, wlanAPRxDataPkts64 Counter64, wlanAPRxDataBytes64 Counter64, wlanAPTxDataPkts64 Counter64, wlanAPTxDataBytes64 Counter64 } wlanAPCurrentChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The channel the AP is currently using. " ::= { wlsxWlanAPStatsEntry 1 } wlanAPNumClients OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of clients associated to this BSSID. " ::= { wlsxWlanAPStatsEntry 2 } wlanAPTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of packets transmitted on this BSSID. " ::= { wlsxWlanAPStatsEntry 3 } wlanAPTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of bytes transmitted on this BSSID. " ::= { wlsxWlanAPStatsEntry 4 } wlanAPRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of packets received on this BSSID. " ::= { wlsxWlanAPStatsEntry 5 } wlanAPRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of bytes received on this BSSID. " ::= { wlsxWlanAPStatsEntry 6 } wlanAPTxDeauthentications OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of deauthentications transmitted on this BSSID. " ::= { wlsxWlanAPStatsEntry 7 } wlanAPRxDeauthentications OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of deauthentications received on this BSSID. " ::= { wlsxWlanAPStatsEntry 8 } wlanAPChannelThroughput OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The throughput achieved on this channel. " ::= { wlsxWlanAPStatsEntry 9 } wlanAPFrameRetryRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of retry packets as a percentage of the total packets transmitted and received by this BSSID. " ::= { wlsxWlanAPStatsEntry 10 } wlanAPFrameLowSpeedRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps for B band) packets as a percentage of the total packets transmitted and received by this BSSID " ::= { wlsxWlanAPStatsEntry 11 } wlanAPFrameNonUnicastRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of broadcast and multicast packets as a percentage of the total packets transmitted on this BSSIDchannel. " ::= { wlsxWlanAPStatsEntry 12 } wlanAPFrameFragmentationRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of fragments as a percentage of the total packets transmitted by this BSSID. " ::= { wlsxWlanAPStatsEntry 13 } wlanAPFrameBandwidthRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The bandwidth of this BSSID in Kbps. " ::= { wlsxWlanAPStatsEntry 14 } wlanAPFrameRetryErrorRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of error packets as a percentage of the total packets received on this BSSID. " ::= { wlsxWlanAPStatsEntry 15 } wlanAPChannelErrorRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of error packets as a percentage of the total packets received on the current channel. " ::= { wlsxWlanAPStatsEntry 16 } wlanAPFrameReceiveErrorRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of error packets as a percentage of the total packets received on this BSSID. " ::= { wlsxWlanAPStatsEntry 17 } wlanAPRxDataPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " The number of packets received on this BSSID. " ::= { wlsxWlanAPStatsEntry 18 } wlanAPRxDataBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " The number of bytes received on this BSSID. " ::= { wlsxWlanAPStatsEntry 19 } wlanAPTxDataPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " The number of packets transmitted on this BSSID. " ::= { wlsxWlanAPStatsEntry 20 } wlanAPTxDataBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " The number of bytes transmitted on this BSSID. " ::= { wlsxWlanAPStatsEntry 21 } wlanAPRxDataPkts64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of packets received on this BSSID. " ::= { wlsxWlanAPStatsEntry 22 } wlanAPRxDataBytes64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of bytes received on this BSSID. " ::= { wlsxWlanAPStatsEntry 23 } wlanAPTxDataPkts64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of packets transmitted on this BSSID. " ::= { wlsxWlanAPStatsEntry 24 } wlanAPTxDataBytes64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of bytes transmitted on this BSSID. " ::= { wlsxWlanAPStatsEntry 25 } -- This table breaks down the AP statistics observed into different -- rate categories. wlsxWlanAPRateStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxWlanAPRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the AP Packet and Byte Counts but represented in terms of rate categories. " ::= { wlsxWlanAccessPointStatsGroup 2 } wlsxWlanAPRateStatsEntry OBJECT-TYPE SYNTAX WlsxWlanAPRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data rate based packet and byte count entry for an AP" INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} ::= { wlsxWlanAPRateStatsTable 1 } WlsxWlanAPRateStatsEntry ::= SEQUENCE { wlanAPStatsTotPktsAt1Mbps Counter32 , wlanAPStatsTotBytesAt1Mbps Counter32 , wlanAPStatsTotPktsAt2Mbps Counter32 , wlanAPStatsTotBytesAt2Mbps Counter32 , wlanAPStatsTotPktsAt5Mbps Counter32 , wlanAPStatsTotBytesAt5Mbps Counter32 , wlanAPStatsTotPktsAt11Mbps Counter32 , wlanAPStatsTotBytesAt11Mbps Counter32 , wlanAPStatsTotPktsAt6Mbps Counter32 , wlanAPStatsTotBytesAt6Mbps Counter32 , wlanAPStatsTotPktsAt12Mbps Counter32 , wlanAPStatsTotBytesAt12Mbps Counter32 , wlanAPStatsTotPktsAt18Mbps Counter32 , wlanAPStatsTotBytesAt18Mbps Counter32 , wlanAPStatsTotPktsAt24Mbps Counter32 , wlanAPStatsTotBytesAt24Mbps Counter32 , wlanAPStatsTotPktsAt36Mbps Counter32 , wlanAPStatsTotBytesAt36Mbps Counter32 , wlanAPStatsTotPktsAt48Mbps Counter32 , wlanAPStatsTotBytesAt48Mbps Counter32 , wlanAPStatsTotPktsAt54Mbps Counter32 , wlanAPStatsTotBytesAt54Mbps Counter32 , wlanAPStatsTotPktsAt9Mbps Counter32 , wlanAPStatsTotBytesAt9Mbps Counter32 } wlanAPStatsTotPktsAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this BSSID at 1Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 1 } wlanAPStatsTotBytesAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this BSSID at 1Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 2 } wlanAPStatsTotPktsAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this BSSID at 2Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 3 } wlanAPStatsTotBytesAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this BSSID at 2Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 4 } wlanAPStatsTotPktsAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this BSSID at 5Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 5 } wlanAPStatsTotBytesAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this BSSID at 5Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 6 } wlanAPStatsTotPktsAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this BSSID at 11Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 7 } wlanAPStatsTotBytesAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this BSSID at 11Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 8 } wlanAPStatsTotPktsAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this BSSID at 6Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 9 } wlanAPStatsTotBytesAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this BSSID at 6Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 10 } wlanAPStatsTotPktsAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this BSSID at 12Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 11 } wlanAPStatsTotBytesAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this BSSID at 12Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 12 } wlanAPStatsTotPktsAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this BSSID at 18Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 13 } wlanAPStatsTotBytesAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this BSSID at 18Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 14 } wlanAPStatsTotPktsAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this BSSID at 24Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 15 } wlanAPStatsTotBytesAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this BSSID at 24Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 16 } wlanAPStatsTotPktsAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this BSSID at 36Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 17 } wlanAPStatsTotBytesAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this BSSID at 36Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 18 } wlanAPStatsTotPktsAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this BSSID at 48Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 19 } wlanAPStatsTotBytesAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this BSSID at 48Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 20 } wlanAPStatsTotPktsAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this BSSID at 54Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 21 } wlanAPStatsTotBytesAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this BSSID at 54Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 22 } wlanAPStatsTotPktsAt9Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this BSSID at 9Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 23 } wlanAPStatsTotBytesAt9Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this BSSID at 9Mbps rate. " ::= { wlsxWlanAPRateStatsEntry 24 } -- This table breaks down the BSSID statistics observed based on the -- Destination Address Types. wlsxWlanAPDATypeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxWlanAPDATypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the per BSSID Packet and Byte Counts but broken down in terms of Destination Address Type. " ::= { wlsxWlanAccessPointStatsGroup 3 } wlsxWlanAPDATypeStatsEntry OBJECT-TYPE SYNTAX WlsxWlanAPDATypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Destination Address based packet and byte count entry for an AP" INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} ::= { wlsxWlanAPDATypeStatsTable 1 } WlsxWlanAPDATypeStatsEntry ::= SEQUENCE { wlanAPStatsTotDABroadcastPkts Counter32 , wlanAPStatsTotDABroadcastBytes Counter32 , wlanAPStatsTotDAMulticastPkts Counter32 , wlanAPStatsTotDAMulticastBytes Counter32 , wlanAPStatsTotDAUnicastPkts Counter32 , wlanAPStatsTotDAUnicastBytes Counter32 } wlanAPStatsTotDABroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Broadcast packets observed on this BSSID. " ::= { wlsxWlanAPDATypeStatsEntry 1 } wlanAPStatsTotDABroadcastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Broadcast Bytes observed on this BSSID. " ::= { wlsxWlanAPDATypeStatsEntry 2 } wlanAPStatsTotDAMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Multicast packets observed on this BSSID. " ::= { wlsxWlanAPDATypeStatsEntry 3 } wlanAPStatsTotDAMulticastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Multicast Bytes observed on this BSSID. " ::= { wlsxWlanAPDATypeStatsEntry 4 } wlanAPStatsTotDAUnicastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Unicast packets observed on this BSSID. " ::= { wlsxWlanAPDATypeStatsEntry 5 } wlanAPStatsTotDAUnicastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Unicast Bytes observed on this BSSID. " ::= { wlsxWlanAPDATypeStatsEntry 6 } -- This table breaks down the BSSID statistics observed based on the -- the Type of the Packet. wlsxWlanAPFrameTypeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxWlanAPFrameTypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the per BSSID Packet and Byte Counts but broken down into different Frame Types. " ::= { wlsxWlanAccessPointStatsGroup 4 } wlsxWlanAPFrameTypeStatsEntry OBJECT-TYPE SYNTAX WlsxWlanAPFrameTypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Frame Type based packet and byte count entry for an AP" INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} ::= { wlsxWlanAPFrameTypeStatsTable 1 } WlsxWlanAPFrameTypeStatsEntry ::= SEQUENCE { wlanAPStatsTotMgmtPkts Counter32 , wlanAPStatsTotMgmtBytes Counter32 , wlanAPStatsTotCtrlPkts Counter32 , wlanAPStatsTotCtrlBytes Counter32 , wlanAPStatsTotDataPkts Counter32 , wlanAPStatsTotDataBytes Counter32 } wlanAPStatsTotMgmtPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Management packets observed on this BSSID. " ::= { wlsxWlanAPFrameTypeStatsEntry 1 } wlanAPStatsTotMgmtBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Management Bytes observed on this BSSID. " ::= { wlsxWlanAPFrameTypeStatsEntry 2 } wlanAPStatsTotCtrlPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Control packets observed on this BSSID. " ::= { wlsxWlanAPFrameTypeStatsEntry 3 } wlanAPStatsTotCtrlBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Control Bytes observed on this BSSID. " ::= { wlsxWlanAPFrameTypeStatsEntry 4 } wlanAPStatsTotDataPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Data packets observed on this BSSID. " ::= { wlsxWlanAPFrameTypeStatsEntry 5 } wlanAPStatsTotDataBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Data Bytes observed on this BSSID. " ::= { wlsxWlanAPFrameTypeStatsEntry 6 } -- This table breaks down the BSSID statistics observed into packet size -- buckets. wlsxWlanAPPktSizeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxWlanAPPktSizeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the per BSSID Packet Count but broken down into different Packet Sizes. " ::= { wlsxWlanAccessPointStatsGroup 5 } wlsxWlanAPPktSizeStatsEntry OBJECT-TYPE SYNTAX WlsxWlanAPPktSizeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Packet Size based packet count entry for a BSSID" INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} ::= { wlsxWlanAPPktSizeStatsTable 1 } WlsxWlanAPPktSizeStatsEntry ::= SEQUENCE { wlanAPStatsPkts63Bytes Counter32 , wlanAPStatsPkts64To127 Counter32 , wlanAPStatsPkts128To255 Counter32 , wlanAPStatsPkts256To511 Counter32 , wlanAPStatsPkts512To1023 Counter32 , wlanAPStatsPkts1024To1518 Counter32 } wlanAPStatsPkts63Bytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets that were less than 64 bytes long. " ::= { wlsxWlanAPPktSizeStatsEntry 1 } wlanAPStatsPkts64To127 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets that were between 64 and 127 bytes long. " ::= { wlsxWlanAPPktSizeStatsEntry 2 } wlanAPStatsPkts128To255 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets that were between 128 and 255 bytes long. " ::= { wlsxWlanAPPktSizeStatsEntry 3 } wlanAPStatsPkts256To511 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets that were between 256 and 511 bytes long. " ::= { wlsxWlanAPPktSizeStatsEntry 4 } wlanAPStatsPkts512To1023 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets that were between 512 and 1023 bytes long. " ::= { wlsxWlanAPPktSizeStatsEntry 5 } wlanAPStatsPkts1024To1518 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets that were between 1024 and 1518 bytes long. " ::= { wlsxWlanAPPktSizeStatsEntry 6 } -- AP Chan Stats table wlsxWlanAPChStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlanAPChStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Table lists the Channel statistics of all the Access Points connected to the controller. " ::= { wlsxWlanAccessPointStatsGroup 6 } wlsxWlanAPChStatsEntry OBJECT-TYPE SYNTAX WlanAPChStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Access Point Channel Stats entry" INDEX {wlanAPMacAddress, wlanAPRadioNumber} ::= { wlsxWlanAPChStatsTable 1 } WlanAPChStatsEntry ::= SEQUENCE { wlanAPChannelNumber INTEGER, wlanAPChNumStations Integer32, wlanAPChTotPkts Counter32, wlanAPChTotBytes Counter32, wlanAPChTotRetryPkts Counter32, wlanAPChTotFragmentedPkts Counter32, wlanAPChTotPhyErrPkts Counter32, wlanAPChTotMacErrPkts Counter32, wlanAPChNoise Integer32, wlanAPChCoverageIndex Integer32, wlanAPChInterferenceIndex Integer32, wlanAPChFrameRetryRate Integer32, wlanAPChFrameLowSpeedRate Integer32, wlanAPChFrameNonUnicastRate Integer32, wlanAPChFrameFragmentationRate Integer32, wlanAPChFrameBandwidthRate Integer32, wlanAPChFrameRetryErrorRate Integer32, wlanAPChBusyRate Integer32, wlanAPChNumAPs Integer32, wlanAPChFrameReceiveErrorRate Integer32 } wlanAPChannelNumber OBJECT-TYPE SYNTAX INTEGER(1..165) MAX-ACCESS read-only STATUS current DESCRIPTION " The channel the AP is currently using. " ::= { wlsxWlanAPChStatsEntry 1 } wlanAPChNumStations OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of stations using this channel. " ::= { wlsxWlanAPChStatsEntry 2 } wlanAPChTotPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total packets observed on this channel. " ::= { wlsxWlanAPChStatsEntry 3 } wlanAPChTotBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total Bytes observed on this channel. " ::= { wlsxWlanAPChStatsEntry 4 } wlanAPChTotRetryPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total Retry Packets observed on this channel. " ::= { wlsxWlanAPChStatsEntry 5 } wlanAPChTotFragmentedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total Fragmented Packets observed on this channel. " ::= { wlsxWlanAPChStatsEntry 6 } wlanAPChTotPhyErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total Physical Error Packets observed on this channel. " ::= { wlsxWlanAPChStatsEntry 7 } wlanAPChTotMacErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total Mac errors packets observed on this channel. " ::= { wlsxWlanAPChStatsEntry 8 } wlanAPChNoise OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the noise observed on this channel. " ::= { wlsxWlanAPChStatsEntry 9 } wlanAPChCoverageIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the coverage provided by the AP on this channel. " ::= { wlsxWlanAPChStatsEntry 10 } wlanAPChInterferenceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the interference observed on this channel. " ::= { wlsxWlanAPChStatsEntry 11 } wlanAPChFrameRetryRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of retry packets as a percentage of the total packets transmitted and received on this channel. " ::= { wlsxWlanAPChStatsEntry 12 } wlanAPChFrameLowSpeedRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps for B band) packets as a percentage of the total packets transmitted and received on this channel " ::= { wlsxWlanAPChStatsEntry 13 } wlanAPChFrameNonUnicastRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of broadcast and multicast packets as a percentage of the total packets transmitted on this channel. " ::= { wlsxWlanAPChStatsEntry 14 } wlanAPChFrameFragmentationRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of fragments as a percentage of the total packets transmitted on this channel " ::= { wlsxWlanAPChStatsEntry 15 } wlanAPChFrameBandwidthRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The bandwidth of this channel in Kbps. " ::= { wlsxWlanAPChStatsEntry 16 } wlanAPChFrameRetryErrorRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " The number of error packets as a percentage of the total packets received on this channel. " ::= { wlsxWlanAPChStatsEntry 17 } wlanAPChBusyRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the busy this channel is. " ::= { wlsxWlanAPChStatsEntry 18 } wlanAPChNumAPs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Access Points observed on this channel. " ::= { wlsxWlanAPChStatsEntry 19 } wlanAPChFrameReceiveErrorRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of error packets as a percentage of the total packets received on this channel. " ::= { wlsxWlanAPChStatsEntry 20 } -- wlsxWlanStationStatsGroup contains all the statistics observed by different -- Air Monitors attached to this controller. -- Station Statistics are observed by the Air Monitor for that -- specific Station. -- Station Statistics are grouped into Generic, -- Rate, Destination Address and Frame Type Stats. -- Station Statistics Group contains all the statistics related to -- a Station. -- wlsxWlanStationStatsTable will contain all the aggregate statistics collected -- for a Station wlsxWlanStationStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlanStationStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Table lists statistics of all the wireless stations associated with an AP connected to this controller. " ::= { wlsxWlanStationStatsGroup 1} wlsxWlanStationStatsEntry OBJECT-TYPE SYNTAX WlanStationStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Station Stats Entry" INDEX {wlanStaPhyAddress} ::= { wlsxWlanStationStatsTable 1 } WlanStationStatsEntry ::= SEQUENCE { wlanStaChannelNum Unsigned32, wlanStaTxPkts Counter32, wlanStaTxBytes Counter32, wlanStaRxPkts Counter32, wlanStaRxBytes Counter32, wlanStaTxBCastPkts Counter32, wlanStaRxBCastBytes Counter32, wlanStaTxMCastPkts Counter32, wlanStaRxMCastBytes Counter32, wlanStaDataPkts Counter32, wlanStaCtrlPkts Counter32, wlanStaNumAssocRequests Counter32, wlanStaNumAuthRequests Counter32, wlanStaTxDeauthentications Counter32, wlanStaRxDeauthentications Counter32, wlanStaFrameRetryRate Integer32, wlanStaFrameLowSpeedRate Integer32, wlanStaFrameNonUnicastRate Integer32, wlanStaFrameFragmentationRate Integer32, wlanStaFrameBandwidthRate Integer32, wlanStaFrameRetryErrorRate Integer32, wlanStaFrameReceiveErrorRate Integer32, wlanStaTxBCastBytes Counter32, wlanStaTxMCastBytes Counter32 } wlanStaChannelNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The channel the station is currently using. " ::= { wlsxWlanStationStatsEntry 1 } wlanStaTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of packets transmitted by this station. " ::= { wlsxWlanStationStatsEntry 2 } wlanStaTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of bytes transmitted by this station. " ::= { wlsxWlanStationStatsEntry 3 } wlanStaRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of packets received by this station. " ::= { wlsxWlanStationStatsEntry 4 } wlanStaRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of bytes received by this station. " ::= { wlsxWlanStationStatsEntry 5 } wlanStaTxBCastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of broadcast packets transmitted by this station. " ::= { wlsxWlanStationStatsEntry 6 } wlanStaRxBCastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " The number of broadcast bytes transmitted by this station. " ::= { wlsxWlanStationStatsEntry 7 } wlanStaTxMCastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of multicast packets transmitted by this station. " ::= { wlsxWlanStationStatsEntry 8 } wlanStaRxMCastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " The number of multicast bytes transmitted by this station. " ::= { wlsxWlanStationStatsEntry 9 } wlanStaDataPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The total number of Data packets transmitted by this station. " ::= { wlsxWlanStationStatsEntry 10 } wlanStaCtrlPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The total number of Control packets transmitted by this station. " ::= { wlsxWlanStationStatsEntry 11 } wlanStaNumAssocRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Association requests transmitted by this station. " ::= { wlsxWlanStationStatsEntry 12 } wlanStaNumAuthRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Authentication requests transmitted by this station. " ::= { wlsxWlanStationStatsEntry 13 } wlanStaTxDeauthentications OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Deauthentication frames transmitted by this station. " ::= { wlsxWlanStationStatsEntry 14 } wlanStaRxDeauthentications OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Deauthentication frames received by this station. " ::= { wlsxWlanStationStatsEntry 15 } wlanStaFrameRetryRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of retry packets as a percentage of the total packets transmitted and received by this station. " ::= { wlsxWlanStationStatsEntry 16 } wlanStaFrameLowSpeedRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps for B band) packets as a percentage of the total packets transmitted and received by this station. " ::= { wlsxWlanStationStatsEntry 17 } wlanStaFrameNonUnicastRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of broadcast and multicast packets as a percentage of the total packets transmitted by this station. " ::= { wlsxWlanStationStatsEntry 18 } wlanStaFrameFragmentationRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of fragments as a percentage of the total packets transmitted by this station. " ::= { wlsxWlanStationStatsEntry 19 } wlanStaFrameBandwidthRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The bandwidth of this station in Kbps. " ::= { wlsxWlanStationStatsEntry 20 } wlanStaFrameRetryErrorRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " The number of error packets as a percentage of the total packets received by this station. " ::= { wlsxWlanStationStatsEntry 21 } wlanStaFrameReceiveErrorRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of error packets as a percentage of the total packets received by this station. " ::= { wlsxWlanStationStatsEntry 22 } wlanStaTxBCastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of broadcast bytes transmitted by this station. " ::= { wlsxWlanStationStatsEntry 23 } wlanStaTxMCastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of multicast bytes transmitted by this station. " ::= { wlsxWlanStationStatsEntry 24 } -- This table breaks down the Station statistics into different -- rate categories. wlsxWlanStaRateStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxWlanStaRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the Packet and Byte Counts for a station represented in terms of rate categories. " ::= { wlsxWlanStationStatsGroup 2} wlsxWlanStaRateStatsEntry OBJECT-TYPE SYNTAX WlsxWlanStaRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data rate based packet and byte count entry for a station" INDEX {wlanStaPhyAddress} ::= { wlsxWlanStaRateStatsTable 1 } WlsxWlanStaRateStatsEntry ::= SEQUENCE { wlanStaTxPktsAt1Mbps Counter32 , wlanStaTxBytesAt1Mbps Counter32 , wlanStaTxPktsAt2Mbps Counter32 , wlanStaTxBytesAt2Mbps Counter32 , wlanStaTxPktsAt5Mbps Counter32 , wlanStaTxBytesAt5Mbps Counter32 , wlanStaTxPktsAt11Mbps Counter32 , wlanStaTxBytesAt11Mbps Counter32 , wlanStaTxPktsAt6Mbps Counter32 , wlanStaTxBytesAt6Mbps Counter32 , wlanStaTxPktsAt12Mbps Counter32 , wlanStaTxBytesAt12Mbps Counter32 , wlanStaTxPktsAt18Mbps Counter32 , wlanStaTxBytesAt18Mbps Counter32 , wlanStaTxPktsAt24Mbps Counter32 , wlanStaTxBytesAt24Mbps Counter32 , wlanStaTxPktsAt36Mbps Counter32 , wlanStaTxBytesAt36Mbps Counter32 , wlanStaTxPktsAt48Mbps Counter32 , wlanStaTxBytesAt48Mbps Counter32 , wlanStaTxPktsAt54Mbps Counter32 , wlanStaTxBytesAt54Mbps Counter32 , wlanStaRxPktsAt1Mbps Counter32 , wlanStaRxBytesAt1Mbps Counter32 , wlanStaRxPktsAt2Mbps Counter32 , wlanStaRxBytesAt2Mbps Counter32 , wlanStaRxPktsAt5Mbps Counter32 , wlanStaRxBytesAt5Mbps Counter32 , wlanStaRxPktsAt11Mbps Counter32 , wlanStaRxBytesAt11Mbps Counter32 , wlanStaRxPktsAt6Mbps Counter32 , wlanStaRxBytesAt6Mbps Counter32 , wlanStaRxPktsAt12Mbps Counter32 , wlanStaRxBytesAt12Mbps Counter32 , wlanStaRxPktsAt18Mbps Counter32 , wlanStaRxBytesAt18Mbps Counter32 , wlanStaRxPktsAt24Mbps Counter32 , wlanStaRxBytesAt24Mbps Counter32 , wlanStaRxPktsAt36Mbps Counter32 , wlanStaRxBytesAt36Mbps Counter32 , wlanStaRxPktsAt48Mbps Counter32 , wlanStaRxBytesAt48Mbps Counter32 , wlanStaRxPktsAt54Mbps Counter32 , wlanStaRxBytesAt54Mbps Counter32 , wlanStaTxPktsAt9Mbps Counter32 , wlanStaTxBytesAt9Mbps Counter32 , wlanStaRxPktsAt9Mbps Counter32 , wlanStaRxBytesAt9Mbps Counter32 } wlanStaTxPktsAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmited by the station at 1Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 1 } wlanStaTxBytesAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmited by the station at 1Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 2 } wlanStaTxPktsAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmited by the station at 2Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 3 } wlanStaTxBytesAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmited by the station at 2Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 4 } wlanStaTxPktsAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmited by the station at 5Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 5 } wlanStaTxBytesAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmited by the station at 5Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 6 } wlanStaTxPktsAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmited by the station at 11Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 7 } wlanStaTxBytesAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmited by the station at 11Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 8 } wlanStaTxPktsAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmited by the station at 6Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 9 } wlanStaTxBytesAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmited by the station at 6Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 10 } wlanStaTxPktsAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmited by the station at 12Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 11 } wlanStaTxBytesAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmited by the station at 12Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 12 } wlanStaTxPktsAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmited by the station at 18Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 13 } wlanStaTxBytesAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmited by the station at 18Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 14 } wlanStaTxPktsAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmited by the station at 24Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 15 } wlanStaTxBytesAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmited by the station at 24Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 16 } wlanStaTxPktsAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmited by the station at 36Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 17 } wlanStaTxBytesAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmited by the station at 36Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 18 } wlanStaTxPktsAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmited by the station at 48Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 19 } wlanStaTxBytesAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmited by the station at 48Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 20 } wlanStaTxPktsAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmited by the station at 54Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 21 } wlanStaTxBytesAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmited by the station at 54Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 22 } wlanStaRxPktsAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 1Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 23 } wlanStaRxBytesAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 1Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 24 } wlanStaRxPktsAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 2Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 25 } wlanStaRxBytesAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 2Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 26 } wlanStaRxPktsAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 5Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 27 } wlanStaRxBytesAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 5Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 28 } wlanStaRxPktsAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 11Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 29 } wlanStaRxBytesAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 11Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 30 } wlanStaRxPktsAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 6Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 31 } wlanStaRxBytesAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 6Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 32 } wlanStaRxPktsAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 12Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 33 } wlanStaRxBytesAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 12Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 34 } wlanStaRxPktsAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 18Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 35 } wlanStaRxBytesAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 18Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 36 } wlanStaRxPktsAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 24Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 37 } wlanStaRxBytesAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 24Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 38 } wlanStaRxPktsAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 36Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 39 } wlanStaRxBytesAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 36Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 40 } wlanStaRxPktsAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 48Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 41 } wlanStaRxBytesAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 48Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 42 } wlanStaRxPktsAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 54Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 43 } wlanStaRxBytesAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 54Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 44 } wlanStaTxPktsAt9Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmited by the station at 9Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 45 } wlanStaTxBytesAt9Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmited by the station at 9Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 46 } wlanStaRxPktsAt9Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 9Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 47 } wlanStaRxBytesAt9Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 9Mbps rate. " ::= { wlsxWlanStaRateStatsEntry 48 } -- This table breaks down the Station statistics based on the -- Destination Address Types. wlsxWlanStaDATypeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxWlanStaDATypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the Packet and Byte Counts for a station but but broken down in terms of Destination Address Type. " ::= { wlsxWlanStationStatsGroup 3} wlsxWlanStaDATypeStatsEntry OBJECT-TYPE SYNTAX WlsxWlanStaDATypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Destination Address based packet and byte count entry for a station " INDEX {wlanStaPhyAddress} ::= { wlsxWlanStaDATypeStatsTable 1 } WlsxWlanStaDATypeStatsEntry ::= SEQUENCE { wlanStaTxDABroadcastPkts Counter32 , wlanStaTxDABroadcastBytes Counter32 , wlanStaTxDAMulticastPkts Counter32 , wlanStaTxDAMulticastBytes Counter32 , wlanStaTxDAUnicastPkts Counter32 , wlanStaTxDAUnicastBytes Counter32 } wlanStaTxDABroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Broadcast packets transmited by this Station. " ::= { wlsxWlanStaDATypeStatsEntry 1 } wlanStaTxDABroadcastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Broadcast Bytes transmited by this Station. " ::= { wlsxWlanStaDATypeStatsEntry 2 } wlanStaTxDAMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Multicast packets transmited by this station. " ::= { wlsxWlanStaDATypeStatsEntry 3 } wlanStaTxDAMulticastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Multicast Bytes transmited by this station. " ::= { wlsxWlanStaDATypeStatsEntry 4 } wlanStaTxDAUnicastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total of Unicast packets transmited by this station. " ::= { wlsxWlanStaDATypeStatsEntry 5 } wlanStaTxDAUnicastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total of Unicast Bytes transmited by this station. " ::= { wlsxWlanStaDATypeStatsEntry 6 } -- This table breaks down the Station statistics based on the -- the Type of the Packet. wlsxWlanStaFrameTypeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxWlanStaFrameTypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the Packet and Byte Counts for stations but broken down into different Frame Types. " ::= { wlsxWlanStationStatsGroup 4} wlsxWlanStaFrameTypeStatsEntry OBJECT-TYPE SYNTAX WlsxWlanStaFrameTypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Frame Type based packet and byte count entry for a station" INDEX {wlanStaPhyAddress} ::= { wlsxWlanStaFrameTypeStatsTable 1 } WlsxWlanStaFrameTypeStatsEntry ::= SEQUENCE { wlanStaTxMgmtPkts Counter32 , wlanStaTxMgmtBytes Counter32 , wlanStaTxCtrlPkts Counter32 , wlanStaTxCtrlBytes Counter32 , wlanStaTxDataPkts Counter32 , wlanStaTxDataBytes Counter32 , wlanStaRxMgmtPkts Counter32 , wlanStaRxMgmtBytes Counter32 , wlanStaRxCtrlPkts Counter32 , wlanStaRxCtrlBytes Counter32 , wlanStaRxDataPkts Counter32 , wlanStaRxDataBytes Counter32 } wlanStaTxMgmtPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Transmited Management packets from a station. " ::= { wlsxWlanStaFrameTypeStatsEntry 1 } wlanStaTxMgmtBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Transmited Management Bytes from a station " ::= { wlsxWlanStaFrameTypeStatsEntry 2 } wlanStaTxCtrlPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Transmited Control packets from a station " ::= { wlsxWlanStaFrameTypeStatsEntry 3 } wlanStaTxCtrlBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Transmited Control Bytes from a station " ::= { wlsxWlanStaFrameTypeStatsEntry 4 } wlanStaTxDataPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Transmited Data packets from a station " ::= { wlsxWlanStaFrameTypeStatsEntry 5 } wlanStaTxDataBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Transmited Data Bytes observed on this channel. " ::= { wlsxWlanStaFrameTypeStatsEntry 6 } wlanStaRxMgmtPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Management packets at a station. " ::= { wlsxWlanStaFrameTypeStatsEntry 7 } wlanStaRxMgmtBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Management Bytes at a station. " ::= { wlsxWlanStaFrameTypeStatsEntry 8 } wlanStaRxCtrlPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Control packets at a station. " ::= { wlsxWlanStaFrameTypeStatsEntry 9 } wlanStaRxCtrlBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Control Bytes at a station. " ::= { wlsxWlanStaFrameTypeStatsEntry 10 } wlanStaRxDataPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Data packets at a station. " ::= { wlsxWlanStaFrameTypeStatsEntry 11 } wlanStaRxDataBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Data Bytes at a station. " ::= { wlsxWlanStaFrameTypeStatsEntry 12 } -- This table breaks down the Station statistics received or transmited by a -- station into packet size buckets. wlsxWlanStaPktSizeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxWlanStaPktSizeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the Packet and Byte Counts for stations but broken down into different Packet Sizes. " ::= { wlsxWlanStationStatsGroup 5} wlsxWlanStaPktSizeStatsEntry OBJECT-TYPE SYNTAX WlsxWlanStaPktSizeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Packet Size based packet count entry for a station" INDEX {wlanStaPhyAddress} ::= { wlsxWlanStaPktSizeStatsTable 1 } WlsxWlanStaPktSizeStatsEntry ::= SEQUENCE { wlanStaTxPkts63Bytes Counter32 , wlanStaTxPkts64To127 Counter32 , wlanStaTxPkts128To255 Counter32 , wlanStaTxPkts256To511 Counter32 , wlanStaTxPkts512To1023 Counter32 , wlanStaTxPkts1024To1518 Counter32 , wlanStaRxPkts63Bytes Counter32 , wlanStaRxPkts64To127 Counter32 , wlanStaRxPkts128To255 Counter32 , wlanStaRxPkts256To511 Counter32 , wlanStaRxPkts512To1023 Counter32 , wlanStaRxPkts1024To1518 Counter32 } wlanStaTxPkts63Bytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmited by the station that were less than 64 bytes long. " ::= { wlsxWlanStaPktSizeStatsEntry 1 } wlanStaTxPkts64To127 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmited by the station that were between 64 and 127 bytes long. " ::= { wlsxWlanStaPktSizeStatsEntry 2 } wlanStaTxPkts128To255 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmited by the station that were between 128 and 255 bytes long. " ::= { wlsxWlanStaPktSizeStatsEntry 3 } wlanStaTxPkts256To511 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmited by the station that were between 256 and 511 bytes long. " ::= { wlsxWlanStaPktSizeStatsEntry 4 } wlanStaTxPkts512To1023 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmited by the station that were between 512 and 1023 bytes long. " ::= { wlsxWlanStaPktSizeStatsEntry 5 } wlanStaTxPkts1024To1518 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmited by the station that were between 1024 and 1518 bytes long. " ::= { wlsxWlanStaPktSizeStatsEntry 6 } wlanStaRxPkts63Bytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were less than 64 bytes long. " ::= { wlsxWlanStaPktSizeStatsEntry 7 } wlanStaRxPkts64To127 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were between 64 and 127 bytes long. " ::= { wlsxWlanStaPktSizeStatsEntry 8 } wlanStaRxPkts128To255 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were between 128 and 255 bytes long. " ::= { wlsxWlanStaPktSizeStatsEntry 9 } wlanStaRxPkts256To511 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were between 256 and 511 bytes long. " ::= { wlsxWlanStaPktSizeStatsEntry 10 } wlanStaRxPkts512To1023 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were between 512 and 1023 bytes long. " ::= { wlsxWlanStaPktSizeStatsEntry 11 } wlanStaRxPkts1024To1518 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were between 1024 and 1518 bytes long. " ::= { wlsxWlanStaPktSizeStatsEntry 12 } END