LINKSYS-BRGMACSWITCH-MIB DEFINITIONS ::= BEGIN -- Title: LINKSYS ROS -- Private BRIDGE MAC SWITCH MIB -- Version: 7.46 -- Date: 15-Jan-2007 IMPORTS rnd FROM LINKSYS-MIB OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC; rlBrgMacSwitch MODULE-IDENTITY LAST-UPDATED "200701020000Z" ORGANIZATION " Linksys LLC." CONTACT-INFO "www.linksys.com/business/support" DESCRIPTION "This private MIB module defines Switching Parameters private MIBs." REVISION "200701020000Z" DESCRIPTION "Initial revision." ::= { rnd 50 } rlBrgMacSwVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "MIB's version, the current version is 2." ::= { rlBrgMacSwitch 1 } rlBrgMacSwMaxTableNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of MAC Tables supported by the device." ::= { rlBrgMacSwitch 2 } rlBrgMacSwDynamicTables OBJECT-TYPE SYNTAX INTEGER { supported (1), unsupported (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether the device supports port dynamic MAC tables." ::= { rlBrgMacSwitch 3 } --rlBrgMacSwTblPollingTimeout OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The units of this MIB object is seconds." -- ::= { rlBrgMacSwitch 4 } rlBrgMacSwOldEntryDeleteMode OBJECT-TYPE SYNTAX INTEGER { refreshFlag (1), agingFlag(2), agingTime(3), boundaries(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The method used to delete old unused entries refresh_flag: The high level sets a flag when it adds or updates an entry, the Switch clears the flag each time, when it learns the station once more. aging_flag: The high level clears a flag when it adds or updates an entry, the Switch sets the flag each time, when it learns the station once more. aging_time: The high level defines a timeout, the Switch sends a message to the high level each time when the station doesn't send messages during interval between timeout and 2*timeout. Boundaries: The Switch doesn't support any mechanism, and the high level uses two boundaries: red and yellow. When the number of entries exceeds the red boundary, the high level deletes the oldest entries." ::= { rlBrgMacSwitch 5 } rlBrgMacSwSpanningTree OBJECT-TYPE SYNTAX INTEGER { supported (1), unsupported (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether the device supports port the Spanning Tree Protocol." ::= { rlBrgMacSwitch 6 } rlBrgMacSwKeyType OBJECT-TYPE SYNTAX INTEGER { macOnly (1), tagAndMac(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specified the used MAC Address Table kye format: macOnly: One global MAC Address Table per device (leaky VLANs). tagAndMac: MAC Address Table per each VLAN (strick VLANs)." ::= { rlBrgMacSwitch 7 } rlBrgMacSwYellowBoundary OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The yellow boundary." ::= { rlBrgMacSwitch 8 } rlBrgMacSwRedBoundary OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The yellow boundary." ::= { rlBrgMacSwitch 9 } rlBrgMacSwTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether to create a SNMP trap if adding dynamic mac failed due to full hash chain." DEFVAL { false } ::= { rlBrgMacSwitch 10 } rlBrgMacSwOperTrapCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the trap counter status (i.e. number of received MAC addresses since the last trap sent that haven't been inserted into the hash). It is relevant only when trap is enabled." ::= { rlBrgMacSwitch 11 } rlBrgMacSwAdminTrapFrequency OBJECT-TYPE SYNTAX INTEGER (1 .. 86400) -- UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the minimal frequency (in seconds) of sending a trap. It is relevant only when trap is enabled." DEFVAL { 60 } ::= { rlBrgMacSwitch 12 } END