-- ============================================================================ -- AT-SETUP.MIB, Allied Telesis enterprise MIB: -- Device Setup for the AlliedWare Plus(tm) operating system -- -- Copyright (c) 2008 by Allied Telesis, Inc. -- All rights reserved. -- -- ============================================================================ AT-SETUP-MIB DEFINITIONS ::= BEGIN IMPORTS modules FROM AT-SMI-MIB Integer32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI DisplayString, TruthValue FROM SNMPv2-TC; -- 1.3.6.1.4.1.207.8.4.4.4.500 setup MODULE-IDENTITY LAST-UPDATED "200810020000Z" -- October 2, 2008 at 00:00 GMT ORGANIZATION "Allied Telesis, Inc." CONTACT-INFO "http://www.alliedtelesis.com" DESCRIPTION "The AT Setup MIB for moving and copying files to and from the device and managing the software installation and configuration files." REVISION "200810020000Z" -- October 2, 2008 at 00:00 GMT DESCRIPTION "Added support for obtaining GUI applet version information." REVISION "200809300000Z" -- September 30, 2008 at 00:00 GMT DESCRIPTION "Add branch serviceConfig " REVISION "200809240000Z" -- September 24, 2008 at 00:00 GMT DESCRIPTION "Moved file copy branch to the new AT-FILEv2 MIB. Allowed clearing of currentFirmware, nextBootFirmware and nextBootConfig by setting the path objects with an empty string." REVISION "200805210000Z" -- May 21, 2008 at 00:00 GMT DESCRIPTION "Initial revision." ::= { modules 500 } -- -- Node definitions -- -- 1.3.6.1.4.1.207.8.4.4.4.500.1 restartDevice OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "This object will force the device to restart immediately when set with the value of 1. Reads will return 0." ::= { setup 1 } -- ---------------------------------------------------------- -- -- The firmware objects -- ---------------------------------------------------------- -- -- 1.3.6.1.4.1.207.8.4.4.4.500.2 firmware OBJECT IDENTIFIER::= { setup 2 } -- 1.3.6.1.4.1.207.8.4.4.4.500.2.1 currentFirmware OBJECT IDENTIFIER::= { firmware 1 } -- 1.3.6.1.4.1.207.8.4.4.4.500.2.1.1 currSoftVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The major.minor.interim version of the firmware that the device is currently running. Will return 0 if the version cannot be determined." ::= { currentFirmware 1 } -- 1.3.6.1.4.1.207.8.4.4.4.500.2.1.2 currSoftName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the firmware that the device is currently running." ::= { currentFirmware 2 } -- 1.3.6.1.4.1.207.8.4.4.4.500.2.1.3 currSoftSaveAs OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Set with a filename to save the currently running software to the root of the flash. Only one save operation can be executed at a time across all SNMP users. Immediately upon executing the set action the device will indicate that the SNMP set was a success. The actual firmware save operation itself will be started and continue on the device until it has completed. Subsequent reads of the object will return one of several results: saving x A saving operation is currently in progress. You cannot start another save while the object is returning this value. x success The last save operation was successfully completed. x failure: [error] The last save operation failed, with the descriptive message attached. The most common failure is lack of remaining space on the flash. idle There is no save operation in progress and a new one may be started. Upon reading a success or failure message, the message will be cleared and the next read will result in an 'idle' message. A new save operation can now be executed." ::= { currentFirmware 3 } -- 1.3.6.1.4.1.207.8.4.4.4.500.2.2 nextBootFirmware OBJECT IDENTIFIER::= { firmware 2 } -- 1.3.6.1.4.1.207.8.4.4.4.500.2.2.1 nextBootVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The major.minor.interim version of the firmware that the device is currently set to boot from. Will return 0 if the version cannot be determined." ::= { nextBootFirmware 1 } -- 1.3.6.1.4.1.207.8.4.4.4.500.2.2.2 nextBootPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The full path of the release to use the next time the device is rebooted. There is no guarantee that the file referenced exists in the flash (ie, may have been subsequently deleted). This object can be set with an empty string in order to clear the current boot firmware. Otherwise, the path should be in the form: flash:/release.rel. There are several requirements that must be met in order to set this object: - File must exist - File must be in the root of the flash - File must not be the same one that is set as the backup release - File must have a .rel suffix - File must pass several internal checks to ensure it really is a release file" ::= { nextBootFirmware 2 } -- 1.3.6.1.4.1.207.8.4.4.4.500.2.3 backupFirmware OBJECT IDENTIFIER::= { firmware 3 } -- 1.3.6.1.4.1.207.8.4.4.4.500.2.3.1 backupVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The major.minor.interim version of the firmware that the device will boot from as a backup. This will return 0 if the version cannot be determined." ::= { backupFirmware 1 } -- 1.3.6.1.4.1.207.8.4.4.4.500.2.3.2 backupPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The full path of the release to use a backup. There is no guarantee that the file referenced exists in the flash (ie, may have been subsequently deleted). This object can be set with an empty string in order to clear the current backup firmware. Otherwise, the path should be in the form: flash:/release.rel. There are several requirements that must be met in order to set this object: - File must exist - File must be in the root of the flash - File must not be the same one that is set as the next boot release - File must have a .rel suffix - File must pass several internal checks to ensure it really is a release file" ::= { backupFirmware 2 } -- ---------------------------------------------------------- -- -- The configuration file objects -- ---------------------------------------------------------- -- -- 1.3.6.1.4.1.207.8.4.4.4.500.3 deviceConfiguration OBJECT IDENTIFIER::= { setup 3 } -- 1.3.6.1.4.1.207.8.4.4.4.500.3.1 runningConfig OBJECT IDENTIFIER::= { deviceConfiguration 1 } -- 1.3.6.1.4.1.207.8.4.4.4.500.3.1.1 runCnfgSaveAs OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Set with a filename to save the running configuration to root of the flash using that filename. eg myconfig.cfg" ::= { runningConfig 1 } -- 1.3.6.1.4.1.207.8.4.4.4.500.3.2 nextBootConfig OBJECT IDENTIFIER::= { deviceConfiguration 2 } -- 1.3.6.1.4.1.207.8.4.4.4.500.3.2.1 bootCnfgPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The full path of the configuration file to use the next time the device is rebooted. There is no guarantee that the file referenced exists in the flash (ie, may have been subsequently deleted). This object can be set with an empty string in order to clear the current boot configuration. Otherwise, the path should be in the form: flash:/myconfig.cfg There are several requirements that must be met in order to set this object: - File must exist - File must be in the root of the flash - File must have a .cfg suffix " ::= { nextBootConfig 1 } -- 1.3.6.1.4.1.207.8.4.4.4.500.3.2.2 bootCnfgExists OBJECT-TYPE SYNTAX TruthValue (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "This object will return TRUE if the currently defined boot configuration file exists, or FALSE otherwise." ::= { nextBootConfig 2 } -- 1.3.6.1.4.1.207.8.4.4.4.500.3.3 defaultConfig OBJECT IDENTIFIER::= { deviceConfiguration 3 } -- 1.3.6.1.4.1.207.8.4.4.4.500.3.3.1 dfltCnfgPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The full path of the configuration file to use as backup when the device is rebooted. There is no guarantee that the file referenced exists in the flash (ie, may have been subsequently deleted). This object is not settable - the default configuration file is always flash:/default.cfg" ::= { defaultConfig 1 } -- 1.3.6.1.4.1.207.8.4.4.4.500.3.3.2 dfltCnfgExists OBJECT-TYPE SYNTAX TruthValue (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "This object will return TRUE if the currently defined default configuration file exists, or FALSE otherwise." ::= { defaultConfig 2 } -- 1.3.6.1.4.1.207.8.4.4.4.500.5 serviceConfig OBJECT IDENTIFIER::= { setup 5 } -- 1.3.6.1.4.1.207.8.4.4.4.500.5.1 srvcTelnetEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the state of the telnet server of a device. A management application can find out the telnet server is either enabled or disabled by reading this object. To either enable or disable the telnet server, a management application can SET this object with value 'enable(1)' or 'disable(2)' respectively." ::= { serviceConfig 1 } -- 1.3.6.1.4.1.207.8.4.4.4.500.5.2 srvcSshEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the state of the ssh server of a device. A management application can find out the ssh server is either enabled or disabled by reading this object. To either enable or disable the ssh server, a management application can SET this object with value 'enable(1)' or 'disable(2)' respectively." ::= { serviceConfig 2 } -- ---------------------------------------------------------- -- -- GUI applet configuration file objects -- ---------------------------------------------------------- -- -- 1.3.6.1.4.1.207.8.4.4.4.500.6 guiConfig OBJECT IDENTIFIER::= { setup 6 } -- 1.3.6.1.4.1.207.8.4.4.4.500.6.1 guiAppletConfig OBJECT IDENTIFIER::= { guiConfig 1 } -- 1.3.6.1.4.1.207.8.4.4.4.500.6.1.1 guiAppletSysSwVer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the system software release that the currently selected GUI applet was designed to run on. The system will automatically search for GUI applet files residing in the root directory of flash, and will select the latest available one that is applicable to the currently running system software. This will be the applet that is uploaded to a user's web browser when they initiate use of the GUI." ::= { guiAppletConfig 1 } -- 1.3.6.1.4.1.207.8.4.4.4.500.6.1.2 guiAppletSwVer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the software version of the currently selected GUI applet. The system will automatically search for GUI applet files residing in the root directory of flash, and will select the latest available one that is applicable to the currently running system software. This will be the applet that is uploaded to a user's web browser when they initiate use of the GUI." ::= { guiAppletConfig 2 } END -- -- at-setup.mib --