CISCOSB-SYSLOG-MIB DEFINITIONS ::= BEGIN

-- Title:      CISCOSB SYSLOG Private MIB
-- Version:    7.35
-- Date:       15 Jan 2005
--
-- 15-Jun-2003  Added rlSyslogFileMessagesLogged and rlSyslogCacheTotalMessages

IMPORTS
    switch001                                    FROM CISCOSB-MIB
    OBJECT-TYPE, IpAddress, Unsigned32,Counter32,
    MODULE-IDENTITY                         FROM SNMPv2-SMI
    DisplayString, TEXTUAL-CONVENTION,
    TruthValue, RowStatus                   FROM SNMPv2-TC;

 rlSyslog MODULE-IDENTITY
          LAST-UPDATED "200602120000Z"
		  ORGANIZATION "Cisco Small Business"

		  CONTACT-INFO
		  "Postal: 170 West Tasman Drive
		  San Jose , CA 95134-1706
		  USA

		  Website: Cisco Small Business Home http://www.cisco.com/smb>;,
		  Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"

          DESCRIPTION
                  "The private MIB module definition for SYSLOG services in CISCOSB devices."
          REVISION "200602120000Z"
          DESCRIPTION
                  "Editorial changes to support new MIB compilers."
          REVISION "200309220000Z"
          DESCRIPTION
                  "Initial version of this MIB."
          ::= { switch001 82 }

RlSyslogSeverity ::= TEXTUAL-CONVENTION
    STATUS  current
    DESCRIPTION
        "This textual convention maps out to the minimal severity levels
         of syslog messages, or indicate non Active. The syslog protocol
         uses the values 0 (emergency), to 7 (debug) last value notActive
         added to indicate inactivity."
    SYNTAX  INTEGER {
        emergency(0),
        alert(1),
        critical(2),
        error(3),
        warning(4),
        notice(5),
        info(6),
        debug(7),
        notActive(8)
    }

rlSyslogPrivate  OBJECT IDENTIFIER ::= { rlSyslog 2 }

rlSyslogGlobalEnable OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Global enable for syslog flash, syslog cache and syslog UDP.
         When set to false, only console logging is performed."
    DEFVAL  { true }
    ::= { rlSyslogPrivate 1 }

rlSyslogMinLogToConsoleSeverity OBJECT-TYPE
    SYNTAX  RlSyslogSeverity
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The minimal severity to log to console. Lower severity
         will not be written to console. Value notActive indicate this
         activity is disabled."
    DEFVAL  { info }
    ::= { rlSyslogPrivate 2 }

rlSyslogMinLogToFileSeverity OBJECT-TYPE
    SYNTAX  RlSyslogSeverity
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The minimal severity to log to LogFile. Lower severity
         will not be written to the LogFile. Value notActive indicates
         this activity is disabled."
    DEFVAL  { error }
    ::= { rlSyslogPrivate 3 }

rlSyslogMinLogToCacheSeverity OBJECT-TYPE
    SYNTAX  RlSyslogSeverity
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The minimal severity to log to memory cache. Lower severity
         will not be read from cache. Value notActive indicate this activity
         is disabled. Note that all events are logged to cache unless its
         severity is notActive."
    DEFVAL  { info }
    ::= { rlSyslogPrivate 4 }

rlSyslogClearLogfile OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting to a value other than 0 results in deleting the log file."
    ::= { rlSyslogPrivate 5 }

rlSyslogClearCache OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting to a value other than 0 results in clearing the memory cache."
    ::= { rlSyslogPrivate 6 }

rlSyslogMibVersion OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS      read-only
    STATUS      current
    DESCRIPTION
        "The Syslog MIB's version. It's 1."
    ::= { rlSyslogPrivate 7 }

--
-- rlSyslogLog Table
--
rlSyslogLogTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlSyslogLogEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A table containing events sent to the system log file."
    ::= { rlSyslogPrivate 8 }

rlSyslogLogEntry OBJECT-TYPE
    SYNTAX  RlSyslogLogEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION  "A log entry "
    INDEX  { rlSyslogLogCounter   }
    ::= { rlSyslogLogTable 1 }

RlSyslogLogEntry ::=
    SEQUENCE {
        rlSyslogLogCounter          Unsigned32,
        rlSyslogLogDateTime         DisplayString,
        rlSyslogLogAppMnemonic      DisplayString,
        rlSyslogLogSeverity         RlSyslogSeverity,
        rlSyslogLogMessageMnemonic  DisplayString,
        rlSyslogLogText1            DisplayString,
        rlSyslogLogText2            DisplayString,
        rlSyslogLogText3            DisplayString,
        rlSyslogLogText4            DisplayString
    }
rlSyslogLogCounter   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "A counter that identifies this entry - used to differentiate logged
         entries. And the order given is the order of logging. A entries may
         not form sequence of this value. (Time is not a differentiating
         element as logged entries may come in a sequence."
    ::= { rlSyslogLogEntry 1 }

rlSyslogLogDateTime   OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The time in string (formated DD-MMM-YYYY HH:MM:SS e.g
         14-Apr-2002 10:33:31), when the error was logged.."
    ::= { rlSyslogLogEntry 2 }

rlSyslogLogAppMnemonic OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..8))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Application that created this error."
    ::= { rlSyslogLogEntry 3 }

rlSyslogLogSeverity OBJECT-TYPE
    SYNTAX  RlSyslogSeverity
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Severity of the reported error."
    ::= { rlSyslogLogEntry 4 }

rlSyslogLogMessageMnemonic OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Short identifier of this message that created this error."
    ::= { rlSyslogLogEntry 5 }

rlSyslogLogText1 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..160))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The text of the logged message without time and date - part 1."
    ::= { rlSyslogLogEntry 6 }

rlSyslogLogText2 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..160))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The text of the logged message without time and date - part 2."
    ::= { rlSyslogLogEntry 7 }

rlSyslogLogText3 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..160))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The text of the logged message without time and date - part 3."
    ::= { rlSyslogLogEntry 8 }

rlSyslogLogText4 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..160))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The text of the logged message without time and date - part 4."
    ::= { rlSyslogLogEntry 9 }

--
-- rlSyslogLogCache Table
--
rlSyslogLogCacheTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlSyslogLogCacheEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A table containing errors registered to system cache."
    ::= { rlSyslogPrivate 9 }

rlSyslogLogCacheEntry OBJECT-TYPE
    SYNTAX  RlSyslogLogCacheEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION "A log history entry"
    INDEX  { rlSyslogLogCacheCounter   }
    ::= { rlSyslogLogCacheTable 1 }

RlSyslogLogCacheEntry ::=
    SEQUENCE {
        rlSyslogLogCacheCounter             Unsigned32,
        rlSyslogLogCacheDateTime            DisplayString,
        rlSyslogLogCacheAppMnemonic         DisplayString,
        rlSyslogLogCacheSeverity            RlSyslogSeverity,
        rlSyslogLogCacheMessageMnemonic     DisplayString,
        rlSyslogLogCacheText1               DisplayString,
        rlSyslogLogCacheText2               DisplayString,
        rlSyslogLogCacheText3               DisplayString,
        rlSyslogLogCacheText4               DisplayString
    }
rlSyslogLogCacheCounter   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "A counter that identifies this entry - used to differentiate logged
         entries. And the order given is the order of logging. A entries may
         not form sequence of this value. (Time is not a differentiating
         element as logged entries may come in a sequence."
    ::= { rlSyslogLogCacheEntry 1 }

rlSyslogLogCacheDateTime   OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The time in string (formated DD-MMM-YYYY HH:MM:SS e.g
         14-Apr-2002 10:33:31), when the eroor was logged.."
    ::= { rlSyslogLogCacheEntry 2 }

rlSyslogLogCacheAppMnemonic OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..8))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Application that created this error."
    ::= { rlSyslogLogCacheEntry 3 }

rlSyslogLogCacheSeverity OBJECT-TYPE
    SYNTAX  RlSyslogSeverity
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Severity of the reported error."
    ::= { rlSyslogLogCacheEntry 4 }

rlSyslogLogCacheMessageMnemonic OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Short identifier of this message that created this error."
    ::= { rlSyslogLogCacheEntry 5 }

rlSyslogLogCacheText1 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..160))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The text of the logged message without time and date - part 1."
    ::= { rlSyslogLogCacheEntry 6 }

rlSyslogLogCacheText2 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..160))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The text of the logged message without time and date - part 2."
    ::= { rlSyslogLogCacheEntry 7 }

rlSyslogLogCacheText3 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..160))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The text of the logged message without time and date - part 3."
    ::= { rlSyslogLogCacheEntry 8 }

rlSyslogLogCacheText4 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..160))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The text of the logged message without time and date - part 4."
    ::= { rlSyslogLogCacheEntry 9 }

rlSyslogConsoleMessagesIgnored OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is a count of messages not sent to the console
         because the severity level of the message was above
         rlSyslogMinLogToConsoleSeverity, the higher the level,
         the lower the severity."
    ::= { rlSyslogPrivate 10 }

rlSyslogFileMessagesIgnored OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is a count of messages not sent to the file
         because the severity level of the message was above
         rlSyslogMinLogToFileSeverity, the higher the level,
         the lower the severity."
::= { rlSyslogPrivate 11 }

rlSyslogFileMessagesLogged OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is a count of all the messages currently held in the
        Log file."
::= { rlSyslogPrivate 12 }

rlSyslogCacheTotalMessages OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is a count of all the messages currently held in the
        cache."
::= { rlSyslogPrivate 13 }


rlSyslogAggregationEnable  OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "enable/disable Syslog aggregation"
    ::= { rlSyslogPrivate 14 }

rlSyslogAggregationAgingTime OBJECT-TYPE
    SYNTAX  Unsigned32  (15..3600)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "aging time for Syslog aggregated messages"
    DEFVAL {300}
    ::= { rlSyslogPrivate 15 }

rlSyslogMinLogToWebSeverity OBJECT-TYPE
    SYNTAX  RlSyslogSeverity
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The minimal severity to log to WEB client. Lower severity
         will not be displayed in WEB client.
         Value notActive indicate this activity
         is disabled."
    DEFVAL  { info }
    ::= { rlSyslogPrivate 16 }

rlSyslogAlarmFlag OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The MIB is initiated by false and it is set to true every time
        when a syslog message with severity >= min_severity_to_alarm_threshold (host parameter)
        is generated."
    DEFVAL  { false }
    ::= { rlSyslogPrivate 17 }


rlSyslogPhaseOneTests OBJECT IDENTIFIER ::= { rlSyslog 3}

rlSyslogPhaseOneTestGenerator OBJECT-TYPE
    SYNTAX  INTEGER {
        successfulRegistration(11),
        regTheSameComponentTwice (12),
        regWithInvalidComponentID(13),
        regWithInvalidApplicationID(14),
        regWithInvalidMessageString(15),
        regWithInvalidMessageList(16),
        regWithInvalidApplicationList(17),
        successfulLoggingWithNoParams(21),
        logWithUnregisteredComponentID(22),
        logWithInvalidComponentID(23),
        logWithBadApplicationID(24),
        logWithBadMessageID(25),
        paramFormatting(31),
        insufficientParams(32),
        incorrectParams(33),
        tooManyParams(34),
        oversizedParams(35),
        trapParams(36),
        successfulFatalError(41),
        fatalErrorThroughNonFatalInterface(42),
        nonFatalErrorThroughFatalInterface(43),
        nestedFatalErrors(47),
        snmpAccessToLongMessage(62)

    }
-- todo: once we have all of the tests, change them into an enum.
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
      "Writing a value to this leaf results in a test being run on the host."
    ::=  { rlSyslogPhaseOneTests 1 }


END