-- -- Copyright(C) 2003-2009 Server Technology, Inc. -- Sentry3-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, enterprises FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC; sentry3 MODULE-IDENTITY LAST-UPDATED "200903101600Z" -- 10 Mar 2009 ORGANIZATION "Server Technology, Inc." CONTACT-INFO "Server Technology, Inc. 1040 Sandhill Drive Reno, NV 89521 Tel: (775) 284-2000 Fax: (775) 284-2065 Email: mibmaster@servertech.com" DESCRIPTION "This is the MIB module for the third generation of the Sentry product family. This includes the Sentry Remote Power Manager (RPM), Sentry Power Distribution Unit (PDU), Sentry Environmental Monitor (EM), and Sentry Smart and Switched Cabinet Distribution Unit (CDU)." REVISION "200903101600Z" -- 10 Mar 2009 DESCRIPTION "Added support for Per-Outlet Power Sensing (POPS) hardware. Added several new objects: systemFeatures, systemFeatureKey, infeedApparentPower, infeedPowerFactor, infeedCrestFactor, infeedEnergy, outletCapacity, outletVoltage, outletPower, outletApparentPower, outletPowerFactor, outletCrestFactor, and outletEnergy. Added 'voltageSense' and 'powerSense' bit definitions to the input feed and outlet capabilities objects. Increased the size of systemVersion to 50." REVISION "200805071520Z" -- 7 May 2008 DESCRIPTION "Added systemAreaUnit and systemPowerFactor objects. Renamed the systemWattsPerUnitArea object to systemWattsPerAreaUnit. Changed systemArea from read-only to read-write." REVISION "200707091445Z" -- 9 Jul 2007 DESCRIPTION "Added support for products with fan rotation sensing and internal temperature sensing. Added 'fanSense' and 'tempSense' bit definitions to the tower capabilities object. Added 'fanFail' and 'overTemp' states to the towerStatus object. Modified the description of the towerStatusEvent trap to reflect these additions." REVISION "200701091410Z" -- 9 Jan 2007 DESCRIPTION "Added several new objects: systemArea, systemTotalPower, systemWattsPerUnitArea, towerProductSN, towerModelNumber, towerCapabilities, infeedCapacity, infeedVoltage, and infeedPower. Added six states to the outletControlState object." REVISION "200607201200Z" -- 20 Jul 2006 DESCRIPTION "Changed the upper limit of systemTowerCount from 2 to 4." REVISION "200606120930Z" -- 12 Jun 2006 DESCRIPTION "Added a tempHumidSensorTempScale object to select either Celsius or Fahrenheit as the scale for temperature values. To accommodate the maximum Fahrenheit value, the upper limit of tempHumidSensorTempValue was changed to 2540, and the upper limit of tempHumidSensorTempHighThresh was changed to 254. Removed 'Celsius' from the UNITS clause and description of temperature objects. Added the tempHumidSensorTempScale object to the tempHumidSensorTempEvent trap. Changed the upper limit of towerIndex from 2 to 4, to accommodate new products with additional link capabilities." REVISION "200507271105Z" -- 27 Jul 2005 DESCRIPTION "Changed the upper limit of tempHumidSensorTempLowThresh to 123. Changed the upper limit of tempHumidSensorTempValue to 1235." REVISION "200502181145Z" -- 18 Feb 2005 DESCRIPTION "Added CDU products to the MIB description. Corrected syntax of outletID to specify SIZE(2..4)." REVISION "200501071220Z" -- 7 Jan 2005 DESCRIPTION "Added a 'fusedBranch' bit definition to the outlet capabilities object. Added 'offFuse' and 'onFuse' states to the outlet status object. Modified the descriptions of objects and traps to reflect support for these additions." REVISION "200412091320Z" -- 9 Dec 2004 DESCRIPTION "Corrected spelling errors. Removed product acronyms from the trap annotations." REVISION "200411111200Z" -- 11 Nov 2004 DESCRIPTION "Changed the upper limit of tempHumidSensorTempHighThresh to 123. Renamed systemSerialNumber to systemNICSerialNumber." REVISION "200311201300Z" -- 20 Nov 2003 DESCRIPTION "Changed the MIB description to reflect that there are multiple products in the Sentry product family supported by this MIB." REVISION "200310231900Z" -- 23 Oct 2003 DESCRIPTION "Added annotations to the trap definitions. Added a 'reading' state to the outletStatus object. Renamed 'notificationGroup' to 'sentry3Traps'. Corrected the the description of the tempHumidSensorStatusEvent trap." REVISION "200310021100Z" -- 2 Oct 2003 DESCRIPTION "Added a 'failSafe' bit definition to the infeed capabilities object, and corrected the definition of the 'defaultOff' infeed capabilities bit." REVISION "200308271600Z" -- 27 Aug 2003 DESCRIPTION "Added new bit definitions to the infeed and outlet capabilities objects." REVISION "200303281700Z" -- 28 Mar 2003 DESCRIPTION "Added environmental monitor objects and traps." REVISION "200303271700Z" -- 27 Mar 2003 DESCRIPTION "Initial release." ::= { serverTech 3 } serverTech OBJECT IDENTIFIER ::= { enterprises 1718 } -- -- System Group -- systemGroup OBJECT IDENTIFIER ::= { sentry3 1 } systemVersion OBJECT-TYPE SYNTAX DisplayString(SIZE(0..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware version of the system." ::= { systemGroup 1 } systemNICSerialNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the network interface card in the system." ::= { systemGroup 2 } systemLocation OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The location of the system." ::= { systemGroup 3 } systemTowerCount OBJECT-TYPE SYNTAX INTEGER(0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of towers in the system." ::= { systemGroup 4 } systemEnvMonCount OBJECT-TYPE SYNTAX INTEGER(0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of environmental monitors in the system." ::= { systemGroup 5 } systemTotalPower OBJECT-TYPE SYNTAX INTEGER(-1..150000) UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "The total power consumption of all of the input feeds in the system. A non-negative value indicates the total power consumption in Watts. A negative value indicates that the total power consumption was not available." ::= { systemGroup 6 } systemArea OBJECT-TYPE SYNTAX INTEGER(0..1000) UNITS "tenth area units" MAX-ACCESS read-write STATUS current DESCRIPTION "The area that the footprint of the system occupies. A non-zero non-negative value indicates the area in tenths of area units as selected by the systemAreaUnit object. A zero or negative value indicates that the area was not available." ::= { systemGroup 7 } systemWattsPerAreaUnit OBJECT-TYPE SYNTAX INTEGER(-1..1500000) UNITS "Watts per area unit" MAX-ACCESS read-only STATUS current DESCRIPTION "The system Watts per area unit. A non-negative value indicates the power consumption per area unit as selected by the systemAreaUnit object. A negative value indicates that the power consumption per area unit was not available." ::= { systemGroup 8 } systemAreaUnit OBJECT-TYPE SYNTAX INTEGER { squareMeter(0), squareFoot(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The unit of area for the systemArea and systemWattsPerAreaUnit objects. If the agent does not support this object, then the unit of area is a square foot." ::= { systemGroup 9 } systemPowerFactor OBJECT-TYPE SYNTAX INTEGER(50..100) UNITS "hundredths" MAX-ACCESS read-write STATUS current DESCRIPTION "The power factor used in power calculations performed by the system." ::= { systemGroup 10 } systemFeatures OBJECT-TYPE SYNTAX BITS { smartLoadShedding(0), snmpPOPS(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The key-activated features enabled in the system." ::= { systemGroup 11 } systemFeatureKey OBJECT-TYPE SYNTAX DisplayString(SIZE(0..19)) MAX-ACCESS read-write STATUS current DESCRIPTION "A valid feature key written to this object will enable a feature in the system. A valid feature key is in the form xxxx-xxxx-xxxx-xxxx. A read of this object returns an empty string." ::= { systemGroup 12 } -- -- System Tables -- systemTables OBJECT IDENTIFIER ::= { sentry3 2 } -- -- Tower Table -- towerTable OBJECT-TYPE SYNTAX SEQUENCE OF TowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of towers." ::= { systemTables 1 } towerEntry OBJECT-TYPE SYNTAX TowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the tower table." INDEX { towerIndex } ::= { towerTable 1 } TowerEntry ::= SEQUENCE { towerIndex INTEGER, towerID DisplayString, towerName DisplayString, towerStatus INTEGER, towerInfeedCount INTEGER, towerProductSN DisplayString, towerModelNumber DisplayString, towerCapabilities BITS } towerIndex OBJECT-TYPE SYNTAX INTEGER(0..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the tower table." ::= { towerEntry 1 } towerID OBJECT-TYPE SYNTAX DisplayString(SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the tower." ::= { towerEntry 2 } towerName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the tower." ::= { towerEntry 3 } towerStatus OBJECT-TYPE SYNTAX INTEGER { normal(0), noComm(1), fanFail(2), overTemp(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the tower." ::= { towerEntry 4 } towerInfeedCount OBJECT-TYPE SYNTAX INTEGER(0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input feeds on the tower." ::= { towerEntry 5 } towerProductSN OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The product serial number of the tower." ::= { towerEntry 6 } towerModelNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..24)) MAX-ACCESS read-only STATUS current DESCRIPTION "The model number of the tower." ::= { towerEntry 7 } towerCapabilities OBJECT-TYPE SYNTAX BITS { failSafe(0), fuseSense(1), directCurrent(2), threePhase(3), fanSense(4), tempSense(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The capabilities of the tower." ::= { towerEntry 8 } -- -- Input Feed Table -- infeedTable OBJECT-TYPE SYNTAX SEQUENCE OF InfeedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of input feeds." ::= { systemTables 2 } infeedEntry OBJECT-TYPE SYNTAX InfeedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the input feed table." INDEX { towerIndex, infeedIndex } ::= { infeedTable 1 } InfeedEntry ::= SEQUENCE { infeedIndex INTEGER, infeedID DisplayString, infeedName DisplayString, infeedCapabilities BITS, infeedStatus INTEGER, infeedLoadStatus INTEGER, infeedLoadValue INTEGER, infeedLoadHighThresh INTEGER, infeedOutletCount INTEGER, infeedCapacity INTEGER, infeedVoltage INTEGER, infeedPower INTEGER, infeedApparentPower INTEGER, infeedPowerFactor INTEGER, infeedCrestFactor INTEGER, infeedEnergy INTEGER } infeedIndex OBJECT-TYPE SYNTAX INTEGER(0..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the input feed table." ::= { infeedEntry 1 } infeedID OBJECT-TYPE SYNTAX DisplayString(SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the input feed." ::= { infeedEntry 2 } infeedName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the input feed." ::= { infeedEntry 3 } infeedCapabilities OBJECT-TYPE SYNTAX BITS { onSense(0), loadSense(1), powerControl(2), failSafe(3), defaultOff(4), voltageSense(5), powerSense(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The capabilities of the input feed." ::= { infeedEntry 4 } infeedStatus OBJECT-TYPE SYNTAX INTEGER { off(0), on(1), offWait(2), onWait(3), offError(4), onError(5), noComm(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the input feed. If the infeedCapabilities 'onSense' bit is TRUE, then all of the states are supported and indicate the sensed state of the input feed. If the infeedCapabilities 'onSense' bit is FALSE, then only the 'on' and 'noComm' states are supported, and 'on' indicates a derived state, not a sensed state." ::= { infeedEntry 5 } infeedLoadStatus OBJECT-TYPE SYNTAX INTEGER { normal(0), notOn(1), reading(2), loadLow(3), loadHigh(4), overLoad(5), readError(6), noComm(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the load measured on the input feed. If the infeedCapabilities 'loadSense' bit is TRUE, then all of the states are supported. If the infeedCapabilities 'loadSense' bit is FALSE, then only the 'normal' and 'noComm' states are supported." ::= { infeedEntry 6 } infeedLoadValue OBJECT-TYPE SYNTAX INTEGER(-1..25500) UNITS "hundredth Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The load measured on the input feed. A non-negative value indicates the measured load in hundredths of Amps. A negative value indicates that a load value was not able to be measured." ::= { infeedEntry 7 } infeedLoadHighThresh OBJECT-TYPE SYNTAX INTEGER(0..255) UNITS "Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The load high threshold value of the input feed in Amps." ::= { infeedEntry 8 } infeedOutletCount OBJECT-TYPE SYNTAX INTEGER(0..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outlets on the input feed." ::= { infeedEntry 9 } infeedCapacity OBJECT-TYPE SYNTAX INTEGER(-1..255) UNITS "Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The load capacity of the input feed. A non-negative value indicates the maximum load in Amps. A negative value indicates that the capacity was not available." ::= { infeedEntry 10 } infeedVoltage OBJECT-TYPE SYNTAX INTEGER(-1..2600) UNITS "tenth Volts" MAX-ACCESS read-only STATUS current DESCRIPTION "The voltage of the input feed. A non-negative value indicates the voltage in tenths of Volts. A negative value indicates that the voltage was not available." ::= { infeedEntry 11 } infeedPower OBJECT-TYPE SYNTAX INTEGER(-1..15000) UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "The active power consumption of the input feed. A non- negative value indicates the active power consumption in Watts. A negative value indicates that the active power consumption was not available." ::= { infeedEntry 12 } infeedApparentPower OBJECT-TYPE SYNTAX INTEGER(-1..15000) UNITS "Volt-Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The apparent power consumption of the input feed. A non- negative value indicates the apparent power consumption in Volt-Amps. A negative value indicates that the apparent power consumption was not available." ::= { infeedEntry 13 } infeedPowerFactor OBJECT-TYPE SYNTAX INTEGER(-1..100) UNITS "hundredths" MAX-ACCESS read-only STATUS current DESCRIPTION "The power factor of the input feed. A non-negative value indicates the power factor in hundredths. A negative value indicates that the power factor was not able to be measured." ::= { infeedEntry 14 } infeedCrestFactor OBJECT-TYPE SYNTAX INTEGER(-1..1000) UNITS "tenths" MAX-ACCESS read-only STATUS current DESCRIPTION "The crest factor for the load of the input feed. A non- negative value indicates the crest factor in tenths. A negative value indicates that the crest factor was not able to be measured." ::= { infeedEntry 15 } infeedEnergy OBJECT-TYPE SYNTAX INTEGER(-1..2147483647) UNITS "Watt-Hours" MAX-ACCESS read-only STATUS current DESCRIPTION "The energy consumption of the input feed. A non-negative value indicates the energy consumption in Watt-Hours. A negative value indicates that the energy consumption was not available." ::= { infeedEntry 16 } -- -- Outlet Table -- outletTable OBJECT-TYPE SYNTAX SEQUENCE OF OutletEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of outlets." ::= { systemTables 3 } outletEntry OBJECT-TYPE SYNTAX OutletEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the outlet table." INDEX { towerIndex, infeedIndex, outletIndex } ::= { outletTable 1 } OutletEntry ::= SEQUENCE { outletIndex INTEGER, outletID DisplayString, outletName DisplayString, outletCapabilities BITS, outletStatus INTEGER, outletLoadStatus INTEGER, outletLoadValue INTEGER, outletLoadLowThresh INTEGER, outletLoadHighThresh INTEGER, outletControlState INTEGER, outletControlAction INTEGER, outletCapacity INTEGER, outletVoltage INTEGER, outletPower INTEGER, outletApparentPower INTEGER, outletPowerFactor INTEGER, outletCrestFactor INTEGER, outletEnergy INTEGER } outletIndex OBJECT-TYPE SYNTAX INTEGER(0..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the outlet table." ::= { outletEntry 1 } outletID OBJECT-TYPE SYNTAX DisplayString(SIZE(2..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the outlet." ::= { outletEntry 2 } outletName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the outlet." ::= { outletEntry 3 } outletCapabilities OBJECT-TYPE SYNTAX BITS { onSense(0), loadSense(1), powerControl(2), shutdown(3), defaultOn(4), ownInfeed(5), fusedBranch(6), voltageSense(7), powerSense(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The capabilities of the outlet." ::= { outletEntry 4 } outletStatus OBJECT-TYPE SYNTAX INTEGER { off(0), on(1), offWait(2), onWait(3), offError(4), onError(5), noComm(6), reading(7), offFuse(8), onFuse(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the outlet. If the outletCapabilities 'onSense' bit is TRUE, then the state indicates the sensed state of the outlet, not a derived state, and 'offError' and 'onError' are supported to indicate a mismatch between the control and sensed state. If the outletCapabilities 'fusedBranch' bit is TRUE, then the outlet is on a fused branch circuit that can detect the fuse state, and 'offFuse' and 'onFuse' are supported to indicate a fuse error." ::= { outletEntry 5 } outletLoadStatus OBJECT-TYPE SYNTAX INTEGER { normal(0), notOn(1), reading(2), loadLow(3), loadHigh(4), overLoad(5), readError(6), noComm(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the load measured on the outlet. If the outletCapabilities 'loadSense' bit is TRUE, then all of the states are supported. If the outletCapabilities 'loadSense' bit is FALSE, then only the 'normal' and 'noComm' states are supported." ::= { outletEntry 6 } outletLoadValue OBJECT-TYPE SYNTAX INTEGER(-1..25500) UNITS "hundredth Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The load measured on the outlet. A non-negative value indicates the measured load in hundredths of Amps. A negative value indicates that a load value was not able to be measured." ::= { outletEntry 7 } outletLoadLowThresh OBJECT-TYPE SYNTAX INTEGER(0..255) UNITS "Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The load low threshold value of the outlet in Amps." ::= { outletEntry 8 } outletLoadHighThresh OBJECT-TYPE SYNTAX INTEGER(0..255) UNITS "Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The load high threshold value of the outlet in Amps." ::= { outletEntry 9 } outletControlState OBJECT-TYPE SYNTAX INTEGER { idleOff(0), idleOn(1), wakeOff(2), wakeOn(3), off(4), on(5), lockedOff(6), lockedOn(7), reboot(8), shutdown(9), pendOn(10), pendOff(11), minimumOff(12), minimumOn(13), eventOff(14), eventOn(15), eventReboot(16), eventShutdown(17) } MAX-ACCESS read-only STATUS current DESCRIPTION "The control state of the outlet. The supported states are dependent upon the outletCapabilities 'powerControl' and 'shutdown' bits, as well as the supported features of the firmware version." ::= { outletEntry 10 } outletControlAction OBJECT-TYPE SYNTAX INTEGER { none(0), on(1), off(2), reboot(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "An action to change the control state of the outlet. If the outletCapabilities 'powerControl' bit is TRUE, then the 'on', 'off', and 'reboot' actions can be used to change the control state of the outlet. If the outletCapabilities 'powerControl' bit is FALSE, then the actions have no effect." ::= { outletEntry 11 } outletCapacity OBJECT-TYPE SYNTAX INTEGER(-1..255) UNITS "Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The load capacity of the outlet. A non-negative value indicates the maximum load in Amps. A negative value indicates that the capacity was not available. A non- negative value requires POPS hardware and key activation of the 'snmpPOPS' feature." ::= { outletEntry 12 } outletVoltage OBJECT-TYPE SYNTAX INTEGER(-1..2600) UNITS "tenth Volts" MAX-ACCESS read-only STATUS current DESCRIPTION "The voltage of the outlet. A non-negative value indicates the voltage in tenths of Volts. A negative value indicates that the voltage was not available. A non-negative value requires POPS hardware and key activation of the 'snmpPOPS' feature." ::= { outletEntry 13 } outletPower OBJECT-TYPE SYNTAX INTEGER(-1..5000) UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "The active power consumption of the device plugged into the outlet. A non-negative value indicates the active power consumption in Watts. A negative value indicates that the active power consumption was not available. A non-negative value requires POPS hardware and key activation of the 'snmpPOPS' feature." ::= { outletEntry 14 } outletApparentPower OBJECT-TYPE SYNTAX INTEGER(-1..15000) UNITS "Volt-Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The apparent power consumption of the device plugged into the outlet. A non-negative value indicates the apparent power consumption in Volt-Amps. A negative value indicates that the apparent power consumption was not available. A non-negative value requires POPS hardware and key activation of the 'snmpPOPS' feature." ::= { outletEntry 15 } outletPowerFactor OBJECT-TYPE SYNTAX INTEGER(-1..100) UNITS "hundredths" MAX-ACCESS read-only STATUS current DESCRIPTION "The power factor of the device plugged into the outlet. A non-negative value indicates the power factor in hundredths. A negative value indicates that the power factor was not able to be measured. A non-negative value requires POPS hardware and key activation of the 'snmpPOPS' feature." ::= { outletEntry 16 } outletCrestFactor OBJECT-TYPE SYNTAX INTEGER(-1..1000) UNITS "tenths" MAX-ACCESS read-only STATUS current DESCRIPTION "The crest factor for the load of the device plugged into the outlet. A non-negative value indicates the crest factor in tenths. A negative value indicates that the crest factor was not able to be measured. A non-negative value requires POPS hardware and key activation of the 'snmpPOPS' feature." ::= { outletEntry 17 } outletEnergy OBJECT-TYPE SYNTAX INTEGER(-1..2147483647) UNITS "Watt-Hours" MAX-ACCESS read-only STATUS current DESCRIPTION "The energy consumption of the device plugged into the outlet. A non-negative value indicates the energy consumption in Watt-Hours. A negative value indicates that the energy consumption was not available. A non-negative value requires POPS hardware and key activation of the 'snmpPOPS' feature." ::= { outletEntry 18 } -- -- Environmental Monitor Table -- envMonTable OBJECT-TYPE SYNTAX SEQUENCE OF EnvMonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of environmental monitors." ::= { systemTables 4 } envMonEntry OBJECT-TYPE SYNTAX EnvMonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the environmental monitor table." INDEX { envMonIndex } ::= { envMonTable 1 } EnvMonEntry ::= SEQUENCE { envMonIndex INTEGER, envMonID DisplayString, envMonName DisplayString, envMonStatus INTEGER, envMonWaterSensorName DisplayString, envMonWaterSensorStatus INTEGER, envMonADCName DisplayString, envMonADCStatus INTEGER, envMonADCCount INTEGER, envMonADCLowThresh INTEGER, envMonADCHighThresh INTEGER, envMonTempHumidSensorCount INTEGER, envMonContactClosureCount INTEGER } envMonIndex OBJECT-TYPE SYNTAX INTEGER(0..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the environmental monitor table." ::= { envMonEntry 1 } envMonID OBJECT-TYPE SYNTAX DisplayString(SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the environmental monitor." ::= { envMonEntry 2 } envMonName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the environmental monitor." ::= { envMonEntry 3 } envMonStatus OBJECT-TYPE SYNTAX INTEGER { normal(0), noComm(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the environmental monitor." ::= { envMonEntry 4 } envMonWaterSensorName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the water sensor." ::= { envMonEntry 5 } envMonWaterSensorStatus OBJECT-TYPE SYNTAX INTEGER { normal(0), alarm(1), noComm(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the water sensor." ::= { envMonEntry 6 } envMonADCName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the analog-to-digital converter." ::= { envMonEntry 7 } envMonADCStatus OBJECT-TYPE SYNTAX INTEGER { normal(0), reading(1), countLow(2), countHigh(3), readError(4), noComm(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the analog-to-digital converter." ::= { envMonEntry 8 } envMonADCCount OBJECT-TYPE SYNTAX INTEGER(-1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The 8-bit count value from the analog-to-digital converter. A non-negative value indicates the digital value retrieved from the ADC. A negative value indicates that a digital value was not able to be retrieved." ::= { envMonEntry 9 } envMonADCLowThresh OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The 8-bit count low threshold value of the analog-to-digital converter." ::= { envMonEntry 10 } envMonADCHighThresh OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The 8-bit count high threshold value of the analog-to-digital converter." ::= { envMonEntry 11 } envMonTempHumidSensorCount OBJECT-TYPE SYNTAX INTEGER(0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of temperature/humidity sensors on the environmental monitor." ::= { envMonEntry 12 } envMonContactClosureCount OBJECT-TYPE SYNTAX INTEGER(0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of contact closures on the environmental monitor." ::= { envMonEntry 13 } -- -- Temperature/Humidity Sensor Table -- tempHumidSensorTable OBJECT-TYPE SYNTAX SEQUENCE OF TempHumidSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of temperature/humidity sensors." ::= { systemTables 5 } tempHumidSensorEntry OBJECT-TYPE SYNTAX TempHumidSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the temperature/humidity sensor table." INDEX { envMonIndex, tempHumidSensorIndex } ::= { tempHumidSensorTable 1 } TempHumidSensorEntry ::= SEQUENCE { tempHumidSensorIndex INTEGER, tempHumidSensorID DisplayString, tempHumidSensorName DisplayString, tempHumidSensorStatus INTEGER, tempHumidSensorTempStatus INTEGER, tempHumidSensorTempValue INTEGER, tempHumidSensorTempLowThresh INTEGER, tempHumidSensorTempHighThresh INTEGER, tempHumidSensorHumidStatus INTEGER, tempHumidSensorHumidValue INTEGER, tempHumidSensorHumidLowThresh INTEGER, tempHumidSensorHumidHighThresh INTEGER, tempHumidSensorTempScale INTEGER } tempHumidSensorIndex OBJECT-TYPE SYNTAX INTEGER(0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the temperature/humidity sensor table." ::= { tempHumidSensorEntry 1 } tempHumidSensorID OBJECT-TYPE SYNTAX DisplayString(SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the temperature/humidity sensor." ::= { tempHumidSensorEntry 2 } tempHumidSensorName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the temperature/humidity sensor." ::= { tempHumidSensorEntry 3 } tempHumidSensorStatus OBJECT-TYPE SYNTAX INTEGER { found(0), notFound(1), lost(2), noComm(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the temperature/humidity sensor." ::= { tempHumidSensorEntry 4 } tempHumidSensorTempStatus OBJECT-TYPE SYNTAX INTEGER { normal(0), notFound(1), reading(2), tempLow(3), tempHigh(4), readError(5), lost(6), noComm(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the temperature sensor." ::= { tempHumidSensorEntry 5 } tempHumidSensorTempValue OBJECT-TYPE SYNTAX INTEGER(-1..2540) UNITS "tenth degrees" MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature measured by the sensor. A non-negative value indicates the measured temperature in tenths of degrees, using the scale selected by tempHumidSensorTempScale. If the agent does not support the tempHumidSensorTempScale object, then the temperature scale used is Celsius. A negative value indicates that a temperature value was not able to be measured." ::= { tempHumidSensorEntry 6 } tempHumidSensorTempLowThresh OBJECT-TYPE SYNTAX INTEGER(0..254) UNITS "degrees" MAX-ACCESS read-write STATUS current DESCRIPTION "The temperature low threshold value of the sensor in degrees, using the scale selected by tempHumidSensorTempScale. If the agent does not support the tempHumidSensorTempScale object, then the temperature scale used is Celsius." ::= { tempHumidSensorEntry 7 } tempHumidSensorTempHighThresh OBJECT-TYPE SYNTAX INTEGER(0..254) UNITS "degrees" MAX-ACCESS read-write STATUS current DESCRIPTION "The temperature high threshold value of the sensor in degrees, using the scale selected by tempHumidSensorTempScale. If the agent does not support the tempHumidSensorTempScale object, then the temperature scale used is Celsius." ::= { tempHumidSensorEntry 8 } tempHumidSensorHumidStatus OBJECT-TYPE SYNTAX INTEGER { normal(0), notFound(1), reading(2), humidLow(3), humidHigh(4), readError(5), lost(6), noComm(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the humidity sensor." ::= { tempHumidSensorEntry 9 } tempHumidSensorHumidValue OBJECT-TYPE SYNTAX INTEGER(-1..100) UNITS "percentage relative humidity" MAX-ACCESS read-only STATUS current DESCRIPTION "The humidity measured by the sensor. A non-negative value indicates the measured humidity in percentage relative humidity. A negative value indicates that a humidity value was not able to be measured." ::= { tempHumidSensorEntry 10 } tempHumidSensorHumidLowThresh OBJECT-TYPE SYNTAX INTEGER(0..100) UNITS "percentage relative humidity" MAX-ACCESS read-write STATUS current DESCRIPTION "The humidity low threshold value of the sensor in percentage relative humidity." ::= { tempHumidSensorEntry 11 } tempHumidSensorHumidHighThresh OBJECT-TYPE SYNTAX INTEGER(0..100) UNITS "percentage relative humidity" MAX-ACCESS read-write STATUS current DESCRIPTION "The humidity low threshold value of the sensor in percentage relative humidity." ::= { tempHumidSensorEntry 12 } tempHumidSensorTempScale OBJECT-TYPE SYNTAX INTEGER { celsius(0), fahrenheit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The scale used for temperature values. This is a global setting for all temperature values in the system. If the agent does not support this object, then the temperature scale used is Celsius." ::= { tempHumidSensorEntry 13 } -- -- Contact Closure Table -- contactClosureTable OBJECT-TYPE SYNTAX SEQUENCE OF ContactClosureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of contact closures." ::= { systemTables 6 } contactClosureEntry OBJECT-TYPE SYNTAX ContactClosureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the contact closure table." INDEX { envMonIndex, contactClosureIndex } ::= { contactClosureTable 1 } ContactClosureEntry ::= SEQUENCE { contactClosureIndex INTEGER, contactClosureID DisplayString, contactClosureName DisplayString, contactClosureStatus INTEGER } contactClosureIndex OBJECT-TYPE SYNTAX INTEGER(0..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the contact closure table." ::= { contactClosureEntry 1 } contactClosureID OBJECT-TYPE SYNTAX DisplayString(SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the contact closure." ::= { contactClosureEntry 2 } contactClosureName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the contact closure." ::= { contactClosureEntry 3 } contactClosureStatus OBJECT-TYPE SYNTAX INTEGER { normal(0), alarm(1), noComm(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the contact closure." ::= { contactClosureEntry 4 } -- -- Notifications -- sentry3Traps OBJECT IDENTIFIER ::= { sentry3 100 } events OBJECT IDENTIFIER ::= { sentry3Traps 0 } -- the 0 is for V1 compatibility -- Tower Traps towerStatusEvent NOTIFICATION-TYPE OBJECTS { systemLocation, towerID, towerName, towerStatus } STATUS current DESCRIPTION "Tower status event. If enabled, this trap is sent when the towerStatus indicates an error state ('noComm', 'fanFail', or 'overTemp'). This trap is repeated periodically while the towerStatus remains in an error state. If the towerStatus returns to a non-error state ('normal'), this trap is sent once more with the non-error towerStatus, and then stops being repeated. While the towerStatus indicates a 'noComm' error state, all status and load traps are suppressed for input feeds and outlets on the tower." --#TYPE "Sentry: Tower Status Event." --#SUMMARY "Status of Tower '%s' (%s) is '%d'." --#ARGUMENTS { 2, 1, 3 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { events 1 } -- Input Feed Traps infeedStatusEvent NOTIFICATION-TYPE OBJECTS { systemLocation, infeedID, infeedName, infeedStatus } STATUS current DESCRIPTION "Input feed status event. If enabled, this trap is sent when the infeedStatus indicates an error state ('offError', 'onError', or 'noComm'). This trap is repeated periodically while the infeedStatus remains in an error state. If the infeedStatus returns to a non-error state ('off' or 'on'), this trap is sent once more with the non-error infeedStatus, and then stops being repeated. While the infeedStatus indicates an error state, load traps are suppressed for the input feed, and, if the infeedCapabilities 'failSafe' bit is FALSE, all status and load traps are suppressed for outlets on the input feed." --#TYPE "Sentry: Input Feed Status Event." --#SUMMARY "Status of Input Feed '%s' (%s) is '%d'." --#ARGUMENTS { 2, 1, 3 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { events 2 } infeedLoadEvent NOTIFICATION-TYPE OBJECTS { systemLocation, infeedID, infeedName, infeedLoadStatus, infeedLoadValue, infeedLoadHighThresh } STATUS current DESCRIPTION "Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated." --#TYPE "Sentry: Input Feed Load Event." --#SUMMARY "Load Status of Input Feed '%s' (%s) is '%d'." --#ARGUMENTS { 2, 1, 3 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { events 3 } -- Outlet Traps outletStatusEvent NOTIFICATION-TYPE OBJECTS { systemLocation, outletID, outletName, outletStatus } STATUS current DESCRIPTION "Outlet status event. If enabled, this trap is sent when the outletStatus indicates an error state ('offError', 'onError', 'noComm', 'offFuse', or 'onFuse'). This trap is repeated periodically while the outletStatus remains in an error state. If the outletStatus returns to a non-error state ('off' or 'on'), this trap is sent once more with the non-error outletStatus, and then stops being repeated. While the outletStatus indicates an error state, load traps are suppressed for the outlet." --#TYPE "Sentry: Outlet Status Event." --#SUMMARY "Status of Outlet '%s' (%s) is '%d'." --#ARGUMENTS { 2, 1, 3 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { events 4 } outletLoadEvent NOTIFICATION-TYPE OBJECTS { systemLocation, outletID, outletName, outletLoadStatus, outletLoadValue, outletLoadLowThresh, outletLoadHighThresh } STATUS current DESCRIPTION "Outlet load event. If enabled, this trap is sent when the outletLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the outletLoadStatus remains in an error state. If the outletLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error outletLoadStatus, and then stops being repeated." --#TYPE "Sentry: Outlet Load Event." --#SUMMARY "Load Status of Outlet '%s' (%s) is '%d'." --#ARGUMENTS { 2, 1, 3 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { events 5 } outletChangeEvent NOTIFICATION-TYPE OBJECTS { systemLocation, outletID, outletName, outletStatus, outletControlState } STATUS current DESCRIPTION "Outlet on/off change event. If enabled, this trap is sent when the outletStatus changes from any 'on' state ('on', 'onWait', 'onError', or 'onFuse') to any 'off' state ('off', 'offWait', 'offError', or 'offFuse'), and vice-versa." --#TYPE "Sentry: Outlet Change Event." --#SUMMARY "Outlet '%s' (%s) has changed to '%d'." --#ARGUMENTS { 2, 1, 3 } --#SEVERITY INFORMATIONAL --#GENERIC 6 --#CATEGORY "Status Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { events 6 } -- Environmental Monitor Traps envMonStatusEvent NOTIFICATION-TYPE OBJECTS { systemLocation, envMonID, envMonName, envMonStatus } STATUS current DESCRIPTION "Environmental monitor status event. If enabled, this trap is sent when the envMonStatus indicates an error state ('noComm'). This trap is repeated periodically while the envMonStatus remains in an error state. If the envMonStatus returns to a non-error state ('normal'), this trap is sent once more with the non-error envMonStatus, and then stops being repeated. While the envMonStatus indicates an error state, all status traps are suppressed for the water sensor, ADC, temperature/ humudity sensors, and contact closures on the environmental monitor." --#TYPE "Sentry: Environmental Monitor Status Event." --#SUMMARY "Status of Environmental Monitor '%s' (%s) is '%d'." --#ARGUMENTS { 2, 1, 3 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { events 7 } envMonWaterSensorEvent NOTIFICATION-TYPE OBJECTS { systemLocation, envMonID, envMonWaterSensorName, envMonWaterSensorStatus } STATUS current DESCRIPTION "Environmental monitor water sensor event. If enabled, this trap is sent when the envMonWaterSensorStatus indicates an error state ('alarm'). This trap is repeated periodically while the envMonWaterSensorStatus remains in an error state. If the envMonWaterSensorStatus returns to a non-error state ('normal'), this trap is sent once more with the non-error envMonWaterSensorStatus, and then stops being repeated." --#TYPE "Sentry: Water Sensor Event." --#SUMMARY "Status of Water Sensor '%s' (%s) is '%d'." --#ARGUMENTS { 2, 1, 3 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { events 8 } envMonADCEvent NOTIFICATION-TYPE OBJECTS { systemLocation, envMonID, envMonADCName, envMonADCStatus, envMonADCCount, envMonADCLowThresh, envMonADCHighThresh } STATUS current DESCRIPTION "Environmental monitor analog-to-digital converter event. If enabled, this trap is sent when the envMonADCStatus indicates an error state ('countLow' or 'countHigh'). This trap is repeated periodically while the envMonADCStatus remains in an error state. If the envMonADCStatus returns to a non-error state ('normal'), this trap is sent once more with the non-error envMonADCStatus, and then stops being repeated." --#TYPE "Sentry: ADC Event." --#SUMMARY "Status of ADC '%s' (%s) is '%d'." --#ARGUMENTS { 2, 1, 3 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { events 9 } tempHumidSensorStatusEvent NOTIFICATION-TYPE OBJECTS { systemLocation, tempHumidSensorID, tempHumidSensorName, tempHumidSensorStatus } STATUS current DESCRIPTION "Temperature/humidity sensor status event. If enabled, this trap is sent when the tempHumidSensorStatus indicates an error state ('lost'). This trap is repeated periodically while the tempHumidSensorStatus remains in an error state. If the tempHumidSensorStatus returns to a non-error state ('found'), this trap is sent once more with the non-error tempHumidSensorStatus, and then stops being repeated. While the tempHumidSensorStatus indicates an error state, all temperature and humidity status traps are suppressed for the temperature/humudity sensor." --#TYPE "Sentry: T/H Sensor Status Event." --#SUMMARY "Status of T/H Sensor '%s' (%s) is '%d'." --#ARGUMENTS { 2, 1, 3 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { events 10 } tempHumidSensorTempEvent NOTIFICATION-TYPE OBJECTS { systemLocation, tempHumidSensorID, tempHumidSensorName, tempHumidSensorTempStatus, tempHumidSensorTempValue, tempHumidSensorTempLowThresh, tempHumidSensorTempHighThresh, tempHumidSensorTempScale } STATUS current DESCRIPTION "Temperature/humidity sensor temperature event. If enabled, this trap is sent when the tempHumidSensorTempStatus indicates an error state ('tempLow' or 'tempHigh'). This trap is repeated periodically while the tempHumidSensorTempStatus remains in an error state. If the tempHumidSensorTempStatus returns to a non-error state ('normal'), this trap is sent once more with the non-error tempHumidSensorTempStatus, and then stops being repeated." --#TYPE "Sentry: T/H Sensor Temperature Event." --#SUMMARY "Temperature Status of T/H Sensor '%s' (%s) is '%d'." --#ARGUMENTS { 2, 1, 3 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { events 11 } tempHumidSensorHumidEvent NOTIFICATION-TYPE OBJECTS { systemLocation, tempHumidSensorID, tempHumidSensorName, tempHumidSensorHumidStatus, tempHumidSensorHumidValue, tempHumidSensorHumidLowThresh, tempHumidSensorHumidHighThresh } STATUS current DESCRIPTION "Temperature/humidity sensor humidity event. If enabled, this trap is sent when the tempHumidSensorHumidStatus indicates an error state ('humidLow' or 'humidHigh'). This trap is repeated periodically while the tempHumidSensorHumidStatus remains in an error state. If the tempHumidSensorHumidStatus returns to a non-error state ('normal'), this trap is sent once more with the non-error tempHumidSensorHumidStatus, and then stops being repeated." --#TYPE "Sentry: T/H Sensor Humidity Event." --#SUMMARY "Humidity Status of T/H Sensor '%s' (%s) is '%d'." --#ARGUMENTS { 2, 1, 3 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { events 12 } contactClosureEvent NOTIFICATION-TYPE OBJECTS { systemLocation, contactClosureID, contactClosureName, contactClosureStatus } STATUS current DESCRIPTION "Contact closure event. If enabled, this trap is sent when the contactClosureStatus indicates an error state ('alarm'). This trap is repeated periodically while the contactClosureStatus remains in an error state. If the contactClosureStatus returns to a non-error state ('normal'), this trap is sent once more with the non-error contactClosureStatus, and then stops being repeated." --#TYPE "Sentry: Contact Closure Event." --#SUMMARY "Status of Contact Closure '%s' (%s) is '%d'." --#ARGUMENTS { 2, 1, 3 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { events 13 } END