-- ArubaOS 3.2.0.0_16376
 WLSX-TRAP-MIB DEFINITIONS ::= BEGIN

	IMPORTS
		TEXTUAL-CONVENTION,
		MODULE-IDENTITY,
		OBJECT-TYPE,
		snmpModules,
		Integer32,
		Counter32,
		IpAddress,
		NOTIFICATION-TYPE
			FROM SNMPv2-SMI

		TDomain,
		DisplayString,
		PhysAddress,
		TAddress,
		TimeInterval,
		RowStatus,
		StorageType,
		TestAndIncr,
		MacAddress,
		DateAndTime,
		TruthValue
			FROM SNMPv2-TC

		OBJECT-GROUP
			FROM SNMPv2-CONF
		wlsrEnterpriseMibModules
			FROM ARUBA-MIB
		ArubaFrameType,
		ArubaAddressType,
		ArubaEnableValue,
		ArubaOperStateValue,
		ArubaBlackListReason,
		ArubaDBType,
		ArubaVrrpState,
		ArubaSwitchRole,
		ArubaAuthenticationMethods,
		ArubaConfigurationState,
		ArubaConfigurationChangeType
			FROM ARUBA-TC;

	wlsrTrapMIB MODULE-IDENTITY		LAST-UPDATED "0710032107Z"
		ORGANIZATION "Aruba Wireless Networks"
		CONTACT-INFO
			"Postal:		1322 Crossman Avenue
				       		Sunnyvale, CA 94089
			E-mail:     dl-support@arubanetworks.com
			Phone:      +1 408 227 4500"
		DESCRIPTION
			"This MIB defines the Traps generated by the switch.
			"
		REVISION        "0710032107Z"
		DESCRIPTION
			"The initial revision."
		::= { wlsrEnterpriseMibModules 11 }

-- wlsrTrapsGroup
-- This group defines all the traps generated by the switch.

	wlsxTrapsGroup         	OBJECT IDENTIFIER ::= { wlsrTrapMIB 1 }

--Trap Object Group contains objects used in the traps.

	wlsxTrapObjectsGroup         	OBJECT IDENTIFIER ::= { wlsxTrapsGroup 1 }

--Trap Definitions Group contains Traps definitions.

	wlsxTrapDefinitionsGroup      OBJECT IDENTIFIER ::= { wlsxTrapsGroup 2 }

-- Definition of Objects used in the traps

	wlsxTrapAPMacAddress OBJECT-TYPE
		SYNTAX		MacAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate 
            the wired MAC address of an access point, for which the trap is being raised.
        			"
	::= {wlsxTrapObjectsGroup 1 }

	wlsxTrapAPIpAddress OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate 
            the IP address of an access point, for which the trap is being raised.
        			"
	::= {wlsxTrapObjectsGroup 2 }

	wlsxTrapAPBSSID OBJECT-TYPE
		SYNTAX		MacAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the BSSID of the
            access point, for which the trap is being raised.
        			"
	::= {wlsxTrapObjectsGroup 3 }

	wlsxTrapEssid OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
          This object is used in the traps to indicate the SSID of the
          access point, for which the trap is being raised.
        			"
	::= {wlsxTrapObjectsGroup 4 }

	wlsxTrapTargetAPBSSID OBJECT-TYPE
		SYNTAX		MacAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the BSSID of the
            access point, for which we are raising the trap. If an
            Air Monitor is sending the trap then this will indicate
            AP. If an access point is sending the trap, then it will point
            to itself.
        			"
	::= {wlsxTrapObjectsGroup 5 }

	wlsxTrapTargetAPSSID OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
          This object is used in the traps to indicate the SSID of the
          access point, for which the trap is being raised. If an
          Air Monitor is sending the trap then this will indicate
          AP. If an access point is sending the trap, then it will point
          to itself.
        			"
	::= {wlsxTrapObjectsGroup 6 }

	wlsxTrapTargetAPChannel OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
          This object is used in the traps to indicate the channel of the
          access point, for which the trap is being raised. If an
          air monitor is sending the trap then this will indicate
          AP. If an access point is sending the trap, then it will point
          to itself.
        			"
	::= {wlsxTrapObjectsGroup 7 }

	wlsxTrapNodeMac OBJECT-TYPE
		SYNTAX		MacAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
          This object is used in the traps to indicate the MAC address of
          a node.
        			"
	::= {wlsxTrapObjectsGroup 8 }

	wlsxTrapSourceMac OBJECT-TYPE
		SYNTAX		MacAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
          This object is used in the traps to indicate the MAC address of
          the source.
        			"
	::= {wlsxTrapObjectsGroup 9 }

	wlsxReceiverMac OBJECT-TYPE
		SYNTAX		MacAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
          This object is used in the traps to indicate the MAC address of
          the receiver.
        			"
	::= {wlsxTrapObjectsGroup 10 }

	wlsxTrapTransmitterMac OBJECT-TYPE
		SYNTAX		MacAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
          This object is used in the traps to indicate the MAC address of
          the transmitter.
        			"
	::= {wlsxTrapObjectsGroup 11 }

	wlsxTrapReceiverMac OBJECT-TYPE
		SYNTAX		MacAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
          This object is used in the traps to indicate the MAC address of
          the Transmitter.
        			"
	::= {wlsxTrapObjectsGroup 12 }

	wlsxTrapSnr OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
          This object is used in the traps to indicate the Signal to Noise
          ratio.
        			"
	::= {wlsxTrapObjectsGroup 13 }

	wlsxTrapSignatureName OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
          This object is used in the traps to indicate the Signature Name.
        			"
	::= {wlsxTrapObjectsGroup 14 }

	wlsxTrapFrameType OBJECT-TYPE
		SYNTAX		ArubaFrameType
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
          This object is used in the traps to indicate the Frame Type
        			"
	::= {wlsxTrapObjectsGroup 15 }

	wlsxTrapAddressType OBJECT-TYPE
		SYNTAX		ArubaAddressType
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
          This object is used in the traps to indicate the Address type.
        			"
	::= {wlsxTrapObjectsGroup 16 }

	wlsxTrapAPLocation OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
          This object is used in the traps to indicate the Location of the AP.
        			"
	::= {wlsxTrapObjectsGroup 17 }

	wlsxTrapAPChannel OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
          This object is used in the traps to indicate the Current Channel.
        			"
	::= {wlsxTrapObjectsGroup 18 }

	wlsxTrapAPTxPower OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
          This object is used in the traps to indicate the AP Transmit Power.
        			"
	::= {wlsxTrapObjectsGroup 19 }

	wlsxTrapMatchedMac OBJECT-TYPE
		SYNTAX		MacAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the MAC address
        			"
	::= {wlsxTrapObjectsGroup 20 }

	wlsxTrapMatchedIp OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the IP address
        			"
	::= {wlsxTrapObjectsGroup 21 }

	wlsxTrapRogueIfoURL OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used to point to the WEBUI Rogue AP information URL.
        			"
	::= {wlsxTrapObjectsGroup 22 }

	wlsxTrapVlanId OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the VLAN Id.
        			"
	::= {wlsxTrapObjectsGroup 23 }

	wlsxTrapAdminStatus OBJECT-TYPE
		SYNTAX		ArubaEnableValue
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the admin status of
            VLAN.
        			"
	::= {wlsxTrapObjectsGroup 24 }

	wlsxTrapOperStatus OBJECT-TYPE
		SYNTAX		ArubaOperStateValue
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the admin status of
            VLAN.
        			"
	::= {wlsxTrapObjectsGroup 25 }

	wlsxTrapAuthServerName OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the
            Authentication Server used for Authentication.
        			"
	::= {wlsxTrapObjectsGroup 26 }

	wlsxTrapAuthServerTimeout OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the
            Authentication Server Timeout.
        			"
	::= {wlsxTrapObjectsGroup 27 }

	wlsxTrapCardSlot OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the
           Slot in which this card is present.
        			"
	::= {wlsxTrapObjectsGroup 28 }

	wlsxTrapTemperatureValue OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the
            Temperature Value.
        			"
	::= {wlsxTrapObjectsGroup 29 }

	wlsxTrapProcessName OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the
            Process name.
        			"
	::= {wlsxTrapObjectsGroup 30 }

	wlsxTrapFanNumber OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the
            Fan Number.
        			"
	::= {wlsxTrapObjectsGroup 31 }

	wlsxTrapVoltageType OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the
            type of Voltage.
        			"
	::= {wlsxTrapObjectsGroup 32 }

	wlsxTrapVoltageValue OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the
            voltage value in Float.
        			"
	::= {wlsxTrapObjectsGroup 33 }

	wlsxTrapStationBlackListReason OBJECT-TYPE
		SYNTAX		ArubaBlackListReason
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            The Reason for which a station is black listed.
        			"
	::= {wlsxTrapObjectsGroup 34 }

	wlsxTrapSpoofedIpAddress OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in a trap to identify a spoofed IP address.
        			"
	::= {wlsxTrapObjectsGroup 35 }

	wlsxTrapSpoofedOldPhyAddress OBJECT-TYPE
		SYNTAX		MacAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in a trap to identify an old MAC address.
        			"
	::= {wlsxTrapObjectsGroup 36 }

	wlsxTrapSpoofedNewPhyAddress OBJECT-TYPE
		SYNTAX		MacAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in a trap to identify a New MAC address.
        			"
	::= {wlsxTrapObjectsGroup 37 }

	wlsxTrapDBName OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in a trap to identify name of the database.
        			"
	::= {wlsxTrapObjectsGroup 38 }

	wlsxTrapDBUserName OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in a trap to identify name of the database user.
        			"
	::= {wlsxTrapObjectsGroup 39 }

	wlsxTrapDBIpAddress OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in a trap to identify the IpAddress of the 
            Database.
        			"
	::= {wlsxTrapObjectsGroup 40 }

	wlsxTrapDBType OBJECT-TYPE
		SYNTAX		ArubaDBType
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in a trap to identify the port of the user.
        			"
	::= {wlsxTrapObjectsGroup 41 }

	wlsxTrapVrrpID OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object contains the Virtual Router Identifier.
        			"
	::= {wlsxTrapObjectsGroup 42 }

	wlsxTrapVrrpMasterIp OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object contains the Master IP address.
        			"
	::= {wlsxTrapObjectsGroup 43 }

	wlsxTrapVrrpOperState OBJECT-TYPE
		SYNTAX		ArubaVrrpState
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents the VRRP Operational state.
        			"
	::= {wlsxTrapObjectsGroup 44 }

	wlsxTrapESIServerGrpName OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents the External Services Interface (ESI) Server
            Group name
        			"
	::= {wlsxTrapObjectsGroup 45 }

	wlsxTrapESIServerName OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents the External Services Interface (ESI) Server
            Name
        			"
	::= {wlsxTrapObjectsGroup 46 }

	wlsxTrapESIServerIpAddress OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents the External Services Interface (ESI) Server
            IP address
        			"
	::= {wlsxTrapObjectsGroup 47 }

	wlsxTrapLicenseDaysRemaining OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents number of the days remaining prior to a 
            license expiry.
        			"
	::= {wlsxTrapObjectsGroup 48 }

	wlsxTrapSwitchIp OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents the controller IP address. 
        			"
	::= {wlsxTrapObjectsGroup 49 }

	wlsxTrapSwitchRole OBJECT-TYPE
		SYNTAX		ArubaSwitchRole
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents the Role of the controller. 
        			"
	::= {wlsxTrapObjectsGroup 50 }

	wlsxTrapUserIpAddress OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents IP address of the User.
        			"
	::= {wlsxTrapObjectsGroup 51 }

	wlsxTrapUserPhyAddress OBJECT-TYPE
		SYNTAX		MacAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents MAC address of the User.
        			"
	::= {wlsxTrapObjectsGroup 52 }

	wlsxTrapUserName OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents the user name.
        			"
	::= {wlsxTrapObjectsGroup 53 }

	wlsxTrapUserRole OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents the Authentication method of the user.
        			"
	::= {wlsxTrapObjectsGroup 54 }

	wlsxTrapUserAuthenticationMethod OBJECT-TYPE
		SYNTAX		ArubaAuthenticationMethods
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents the Authentication method of the user.
        			"
	::= {wlsxTrapObjectsGroup 55 }

	wlsxTrapAPRadioNumber OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents the radio number.
        			"
	::= {wlsxTrapObjectsGroup 56 }

	wlsxTrapRogueInfoURL OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
			This object is used to point to the WEBGUI Rogue AP information 
			URL.
        			"
	::= {wlsxTrapObjectsGroup 57 }

	wlsxTrapInterferingAPInfoURL OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
			This object is used to point to the WEBGUI Rogue interfering 
			AP information URL.
        			"
	::= {wlsxTrapObjectsGroup 58 }

	wlsxTrapPortNumber OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the
           port number.
        			"
	::= {wlsxTrapObjectsGroup 59 }

	wlsxTrapTime OBJECT-TYPE
		SYNTAX		DateAndTime
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in all the enterprise traps to indicate the
           the time when the trap is generated on the controller.
        			"
	::= {wlsxTrapObjectsGroup 60 }

	wlsxTrapHostIp OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents the Trap host. 
        			"
	::= {wlsxTrapObjectsGroup 61 }

	wlsxTrapHostPort OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents the Trap host port. 
        			"
	::= {wlsxTrapObjectsGroup 62 }

	wlsxTrapConfigurationId OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents the ID of the configuration, to be used in traps.
        			"
	::= {wlsxTrapObjectsGroup 63 }

	wlsxTrapCTSURL OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents the URL from which the transfer should happen.
        			"
	::= {wlsxTrapObjectsGroup 64 }

	wlsxTrapCTSTransferType OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents  the transfer type, upload or download.
        			"
	::= {wlsxTrapObjectsGroup 65 }

	wlsxTrapConfigurationState OBJECT-TYPE
		SYNTAX		ArubaConfigurationState
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents state of the configuration transfer.
        			"
	::= {wlsxTrapObjectsGroup 66 }

	wlsxTrapUpdateFailureReason OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents the reason for the update failure.
        			"
	::= {wlsxTrapObjectsGroup 67 }

	wlsxTrapUpdateFailedObj OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This variable represents the AMAPI object which is the reason for the the update failure.
        			"
	::= {wlsxTrapObjectsGroup 68 }

	wlsxTrapTableEntryChangeType OBJECT-TYPE
		SYNTAX		ArubaConfigurationChangeType
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents type of the configuration change. 
        			"
	::= {wlsxTrapObjectsGroup 69 }

	wlsxTrapGlobalConfigObj OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This variable represents the AMAPI object corresponding to the global configuration change.
        			"
	::= {wlsxTrapObjectsGroup 70 }

	wlsxTrapTableGenNumber OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents generation number of a table. Used in the MMS, to keep track of the table content changes.
        			"
	::= {wlsxTrapObjectsGroup 71 }

	wlsxTrapLicenseId OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the license ID.
        			"
	::= {wlsxTrapObjectsGroup 72 }

	wlsxTrapConfidenceLevel OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object is used in the traps to indicate the Confidence Level as a percentage
        			"
	::= {wlsxTrapObjectsGroup 73 }

	wlsxTrapMissingLicenses OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This variable indicates any licenses that are not present during a configuration update
        			"
	::= {wlsxTrapObjectsGroup 74 }

	wlsxVoiceCurrentNumCdr OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This object represents  the number of CDRs in buffer.
        			"
	::= {wlsxTrapObjectsGroup 75 }

	wlsxTrapTunnelId OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This Object represents the tunnel ID.
        			"
	::= {wlsxTrapObjectsGroup 76 }

	wlsxTrapTunnelStatus OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This Object represents the tunnel Status.
        			"
	::= {wlsxTrapObjectsGroup 77 }

	wlsxTrapTunnelUpReason OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This Object represents the tunnel up reason.
        			"
	::= {wlsxTrapObjectsGroup 78 }

	wlsxTrapTunnelDownReason OBJECT-TYPE
		SYNTAX		DisplayString(SIZE(0..64))
		MAX-ACCESS	accessible-for-notify
		STATUS		current
		DESCRIPTION
			"			
            This Object represents the tunnel down reason.
        			"
	::= {wlsxTrapObjectsGroup 79 }

-- Definition of traps

	wlsxVlanLinkUp NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapVlanId,wlsxTrapAdminStatus,
				wlsxTrapOperStatus}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that a VLAN interface is up.
        	"
	::= {wlsxTrapDefinitionsGroup 1000 }

	wlsxVlanLinkDown NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapVlanId,wlsxTrapAdminStatus,
				wlsxTrapOperStatus}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that a VLAN interface is down.
        	"
	::= {wlsxTrapDefinitionsGroup 1001 }

	wlsxSignatureMatch NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
				wlsxTrapSnr,wlsxTrapAPBSSID,
				wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that a signature match was detected.
        	"
	::= {wlsxTrapDefinitionsGroup 1002 }

	wlsxNodeRateAnomaly NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapNodeMac,
				wlsxTrapSnr,wlsxTrapAPBSSID,
				wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that a node is exceeding the threshold set for 
            the frame type.
        	"
	::= {wlsxTrapDefinitionsGroup 1003 }

	wlsxNormalTemperature NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTemperatureValue}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the Temperature has returned to 
            an acceptable range.
        	"
	::= {wlsxTrapDefinitionsGroup 1004 }

	wlsxProcessRestart NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapProcessName}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the named process has been restarted.
        	"
	::= {wlsxTrapDefinitionsGroup 1005 }

	wlsxFlashSpaceOK NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime}
		STATUS		current
		DESCRIPTION
			"			
            This trap which indicates that the system flash space is back 
            to a sufficient level.
        	"
	::= {wlsxTrapDefinitionsGroup 1006 }

	wlsxMemoryUsageOK NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime}
		STATUS		current
		DESCRIPTION
			"			
            This trap which indicates that the free memory usage is back 
            to a sufficient level.
        	"
	::= {wlsxTrapDefinitionsGroup 1007 }

	wlsxPowerSupplyOK NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the system power supply condition have
            returned to normal operation status.
        	"
	::= {wlsxTrapDefinitionsGroup 1008 }

	wlsxFanOK NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapFanNumber}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the fan has returned to normal.
        	"
	::= {wlsxTrapDefinitionsGroup 1009 }

	wlsxInRangeVoltage NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapVoltageType,wlsxTrapVoltageValue}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the controller Voltage is back within range.
        	"
	::= {wlsxTrapDefinitionsGroup 1010 }

	wlsxCoverageHoleResolved NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAPBSSID,wlsxTrapAPLocation,
				wlsxTrapAPIpAddress,wlsxTrapNodeMac}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that a coverage hole at location 
            wlsxTrapAPLocation has been resolved.
        	"
	::= {wlsxTrapDefinitionsGroup 1011 }

	wlsxNSwitchIPChanged NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSwitchIp}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the controller IP address has changed.
        	"
	::= {wlsxTrapDefinitionsGroup 1012 }

	wlsxNSwitchRoleChange NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSwitchRole}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the role of the controller IP address has 
            changed.
        	"
	::= {wlsxTrapDefinitionsGroup 1013 }

	wlsxNUserEntryCreated NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that a new user was created.
        	"
	::= {wlsxTrapDefinitionsGroup 1014 }

	wlsxNUserEntryDeleted NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that a user was deleted.
        	"
	::= {wlsxTrapDefinitionsGroup 1015 }

	wlsxNUserEntryAuthenticated NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress,
				wlsxTrapUserName,wlsxTrapUserAuthenticationMethod,
				wlsxTrapUserRole}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that a user is Authenticated.
        	"
	::= {wlsxTrapDefinitionsGroup 1016 }

	wlsxNUserEntryDeAuthenticated NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that a user is Deauthenticated.
        	"
	::= {wlsxTrapDefinitionsGroup 1017 }

	wlsxNUserAuthenticationFailed NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that a user authentication has failed.
        	"
	::= {wlsxTrapDefinitionsGroup 1018 }

	wlsxNAuthServerReqTimedOut NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAuthServerName}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the authentication server request timed out.
        	"
	::= {wlsxTrapDefinitionsGroup 1019 }

	wlsxNAuthServerTimedOut NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAuthServerName,wlsxTrapAuthServerTimeout}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the authentication server timed out.
        	"
	::= {wlsxTrapDefinitionsGroup 1020 }

	wlsxNAuthServerIsUp NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAuthServerName}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that an authentication server is up.
        	"
	::= {wlsxTrapDefinitionsGroup 1021 }

	wlsxNAuthMaxUserEntries NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime}
		STATUS		current
		DESCRIPTION
			"			
            A trap which indicates that the user entries table is full and 
            cannot add any more entries.
        	"
	::= {wlsxTrapDefinitionsGroup 1022 }

	wlsxNAuthMaxAclEntries NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime}
		STATUS		current
		DESCRIPTION
			"			
            A trap which indicates that the ACL Entries table is full and 
            cannot add any more entries.
        	"
	::= {wlsxTrapDefinitionsGroup 1023 }

	wlsxNAuthMaxBWContracts NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime}
		STATUS		current
		DESCRIPTION
			"			
            A trap which indicates that the controller reached the maximum number 
            of configurable Bandwidth contracts. 
        	"
	::= {wlsxTrapDefinitionsGroup 1024 }

	wlsxNPowerSupplyFailure NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime}
		STATUS		current
		DESCRIPTION
			"			
            A trap which indicates that the power supply has failed.
        	"
	::= {wlsxTrapDefinitionsGroup 1025 }

	wlsxNFanFailure NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapFanNumber}
		STATUS		current
		DESCRIPTION
			"			
            A trap which indicates that the fan has failed or is missing.
        	"
	::= {wlsxTrapDefinitionsGroup 1026 }

	wlsxNOutOfRangeVoltage NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapVoltageType,wlsxTrapVoltageValue}
		STATUS		current
		DESCRIPTION
			"			
            A trap which indicates that the controller voltage is out of range.
        	"
	::= {wlsxTrapDefinitionsGroup 1027 }

	wlsxNOutOfRangeTemperature NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTemperatureValue}
		STATUS		current
		DESCRIPTION
			"			
            A trap which indicates that the controller internal temperature is
            out of range. 
        	"
	::= {wlsxTrapDefinitionsGroup 1028 }

	wlsxNLCInserted NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapCardSlot}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that a line card is inserted.
        	"
	::= {wlsxTrapDefinitionsGroup 1029 }

	wlsxNSCInserted NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapCardSlot}
		STATUS		current
		DESCRIPTION
			"			
            a Trap which indicates that a supervisor card is inserted.
        	"
	::= {wlsxTrapDefinitionsGroup 1030 }

	wlsxNGBICInserted NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that a GBIC is inserted in a Line Card.
        	"
	::= {wlsxTrapDefinitionsGroup 1031 }

	wlsxNProcessDied NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapProcessName}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that a process has died.
        	"
	::= {wlsxTrapDefinitionsGroup 1032 }

	wlsxNProcessExceedsMemoryLimits NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapProcessName}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that a process is consuming Large
            amounts of memory.
        	"
	::= {wlsxTrapDefinitionsGroup 1033 }

	wlsxNLowOnFlashSpace NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that the controller is running low on flash space.
        	"
	::= {wlsxTrapDefinitionsGroup 1034 }

	wlsxNLowMemory NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that the system free memory is low.
        	"
	::= {wlsxTrapDefinitionsGroup 1035 }

	wlsxNFanTrayRemoved NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that a fan tray is removed.
        	"
	::= {wlsxTrapDefinitionsGroup 1036 }

	wlsxNFanTrayInserted NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that a fan tray is inserted.
        	"
	::= {wlsxTrapDefinitionsGroup 1037 }

	wlsxNLCRemoved NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapCardSlot}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that a Line card is removed.
        	"
	::= {wlsxTrapDefinitionsGroup 1038 }

	wlsxNPowerSupplyMissing NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that the power supply is missing.
        	"
	::= {wlsxTrapDefinitionsGroup 1039 }

	wlsxNAccessPointIsUp NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that an access point up.
        	"
	::= {wlsxTrapDefinitionsGroup 1040 }

	wlsxNAccessPointIsDown NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that an access point down.
        	"
	::= {wlsxTrapDefinitionsGroup 1041 }

	wlsxNCoverageHoleDetected NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAPBSSID,wlsxTrapAPLocation,
				wlsxTrapAPIpAddress,wlsxTrapNodeMac}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that an access point at Location 
            wlsxTrapAPLocation has detected a Coverage Hole.
        	"
	::= {wlsxTrapDefinitionsGroup 1042 }

	wlsxNChannelChanged NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAPBSSID,wlsxTrapAPLocation,
				wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that an access point at Location 
            wlsxTrapAPLocation has changed the channel.
        	"
	::= {wlsxTrapDefinitionsGroup 1043 }

	wlsxNStationAddedToBlackList NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapStationBlackListReason}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the station is black listed. 
        	"
	::= {wlsxTrapDefinitionsGroup 1044 }

	wlsxNStationRemovedFromBlackList NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the station is removed from the black list. 
        	"
	::= {wlsxTrapDefinitionsGroup 1045 }

	wlsxNIpSpoofingDetected NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSpoofedIpAddress,wlsxTrapSpoofedOldPhyAddress,
				wlsxTrapSpoofedNewPhyAddress}
		STATUS		current
		DESCRIPTION
			"			
            A trap indicating that the controller detected IP Spoofing. 
        	"
	::= {wlsxTrapDefinitionsGroup 1046 }

	wlsxNDBCommunicationFailure NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapDBName,wlsxTrapDBUserName,
				wlsxTrapDBIpAddress,wlsxTrapDBType}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that communication with Database failed. 
        	"
	::= {wlsxTrapDefinitionsGroup 1047 }

	wlsxNVrrpStateChange NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapVrrpID,wlsxTrapVrrpMasterIp,
				wlsxTrapVrrpOperState}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that VRRP state has changed on the controller. 
        	"
	::= {wlsxTrapDefinitionsGroup 1048 }

	wlsxNRadioAttributesChanged NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPIpAddress,wlsxTrapAPChannel,
				wlsxTrapAPTxPower}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates changes in the Radio attributes of an 
            access point.
        	"
	::= {wlsxTrapDefinitionsGroup 1049 }

	wlsxNESIServerUp NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapESIServerGrpName,wlsxTrapESIServerName,
				wlsxTrapESIServerIpAddress}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that a ESI server is up.
        	"
	::= {wlsxTrapDefinitionsGroup 1050 }

	wlsxNESIServerDown NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapESIServerGrpName,wlsxTrapESIServerName,
				wlsxTrapESIServerIpAddress}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that a ESI server is down.
        	"
	::= {wlsxTrapDefinitionsGroup 1051 }

	wlsxNLicenseExpiry NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapLicenseDaysRemaining}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that one or more licenses on the controller will expire in wlsxTrapLicenseDaysRemaining days.
        	"
	::= {wlsxTrapDefinitionsGroup 1052 }

	wlsxUnsecureAPDetected NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel,
				wlsxTrapMatchedMac,wlsxTrapMatchedIp,
				wlsxTrapRogueInfoURL}
		STATUS		current
		DESCRIPTION
			"			
				This trap indicates that an Unsecure access point was detected
				by an Air Monitor. The AP is declared unsecure, because it was 
				matched it to a configured MAC address or IP address. 
			"
	::= {wlsxTrapDefinitionsGroup 1053 }

	wlsxUnsecureAPResolved NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
				This trap indicates that a previously detected Unsecure 
                access point is no longer present in the network.
			"
	::= {wlsxTrapDefinitionsGroup 1054 }

	wlsxStaImpersonation NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected Station Impersonation.
			"
	::= {wlsxTrapDefinitionsGroup 1055 }

	wlsxReservedChannelViolation NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
				This trap indicates that an AM detected an access point
				which is violating the Reserved Channel configuration.
			"
	::= {wlsxTrapDefinitionsGroup 1056 }

	wlsxValidSSIDViolation NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected an access point violating 
            Valid SSID configuration. 
			"
	::= {wlsxTrapDefinitionsGroup 1057 }

	wlsxChannelMisconfiguration NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected an access point which has
            a bad channel configuration.
			"
	::= {wlsxTrapDefinitionsGroup 1058 }

	wlsxOUIMisconfiguration NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected an access point which has
            a bad OUI configuration.
			"
	::= {wlsxTrapDefinitionsGroup 1059 }

	wlsxSSIDMisconfiguration NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an access point has bad SSID
			configuration.
			"
	::= {wlsxTrapDefinitionsGroup 1060 }

	wlsxShortPreableMisconfiguration NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an access point has bad Short preamble
			configuration.
			"
	::= {wlsxTrapDefinitionsGroup 1061 }

	wlsxWPAMisconfiguration NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an access point has bad WPA
			configuration.
			"
	::= {wlsxTrapDefinitionsGroup 1062 }

	wlsxAdhocNetworkDetected NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM has detected an Ad hoc
			network.
			"
	::= {wlsxTrapDefinitionsGroup 1063 }

	wlsxAdhocNetworkRemoved NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that a previously detected Ad hoc Network is no
            longer present in the network.
			"
	::= {wlsxTrapDefinitionsGroup 1064 }

	wlsxStaPolicyViolation NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapNodeMac,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that a Valid Station policy is violated.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0008
 			http://www.wve.org/entries/show/WVE-2005-0019
	"
	::= {wlsxTrapDefinitionsGroup 1065 }

	wlsxRepeatWEPIVViolation NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
		    This trap indicates that an AM detected a Repeat WEP-IV violation.
			"
	::= {wlsxTrapDefinitionsGroup 1066 }

	wlsxWeakWEPIVViolation NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AP/AM detected a Weak WEP-IV violation.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0021
	"
	::= {wlsxTrapDefinitionsGroup 1067 }

	wlsxChannelInterferenceDetected NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM has detected channel interference.
			"
	::= {wlsxTrapDefinitionsGroup 1068 }

	wlsxChannelInterferenceCleared NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that a previously detected channel interference
            is no longer present. 
			"
	::= {wlsxTrapDefinitionsGroup 1069 }

	wlsxAPInterferenceDetected NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM has detected an AP interference on
            a channel.
			"
	::= {wlsxTrapDefinitionsGroup 1070 }

	wlsxAPInterferenceCleared NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that a previously detected AP interference
            is no longer present. 
			"
	::= {wlsxTrapDefinitionsGroup 1071 }

	wlsxStaInterferenceDetected NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapNodeMac,wlsxTrapAPLocation,
				wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM has detected a Station interference 
            on a channel.
			"
	::= {wlsxTrapDefinitionsGroup 1072 }

	wlsxStaInterferenceCleared NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapNodeMac,wlsxTrapAPLocation,
				wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that a previously detected Station interference
            is no longer present. 
			"
	::= {wlsxTrapDefinitionsGroup 1073 }

	wlsxFrameRetryRateExceeded NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM is reporting that an 
            AP  has exceeded an upper threshold for Frame Retry Rate for AP.
			"
	::= {wlsxTrapDefinitionsGroup 1074 }

	wlsxFrameReceiveErrorRateExceeded NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapTargetAPChannel,wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
		    This trap indicates that an AM is reporting that an AP has exceeded
			an upper threshold for Frame Receive Error Rate for AP.
			"
	::= {wlsxTrapDefinitionsGroup 1075 }

	wlsxFrameFragmentationRateExceeded NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapTargetAPChannel,wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM is reporting that an AP has exceeded
			an upper threshold for Frame Fragmentation Rate for AP. 
			"
	::= {wlsxTrapDefinitionsGroup 1076 }

	wlsxFrameBandWidthRateExceeded NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
				wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM is reporting that a station has 
            exceeded the allocated Bandwidth rate. 
			"
	::= {wlsxTrapDefinitionsGroup 1077 }

	wlsxFrameLowSpeedRateExceeded NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
				wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM is reporting that a station has 
            exceeded the Low speed rate. 
			"
	::= {wlsxTrapDefinitionsGroup 1078 }

	wlsxFrameNonUnicastRateExceeded NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
				wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM is reporting that a station has 
            exceeded the Non Unicast traffic rate. 
			"
	::= {wlsxTrapDefinitionsGroup 1079 }

	wlsxLoadbalancingEnabled NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM is reporting that an AP 
			has enabled Load balancing.
			"
	::= {wlsxTrapDefinitionsGroup 1080 }

	wlsxLoadbalancingDisabled NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM is reporting that an AP
			has enabled Load balancing.
			"
	::= {wlsxTrapDefinitionsGroup 1081 }

	wlsxChannelFrameRetryRateExceeded NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM is reporting that it exceeded an 
            upper threshold for Frame Retry Rate. 
			"
	::= {wlsxTrapDefinitionsGroup 1082 }

	wlsxChannelFrameFragmentationRateExceeded NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM is reporting that it exceeded an 
            upper threshold for Frame Fragmentation Rate. 
			"
	::= {wlsxTrapDefinitionsGroup 1083 }

	wlsxChannelFrameErrorRateExceeded NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM is reporting that it exceeded an 
            upper threshold for Frame Error Rate. 
			"
	::= {wlsxTrapDefinitionsGroup 1084 }

	wlsxSignatureMatchAP NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapSnr,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that the system detected a signature match from an AP.
			"
	::= {wlsxTrapDefinitionsGroup 1085 }

	wlsxSignatureMatchSta NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
				wlsxTrapSnr,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that the system detected a signature match from a Station.
			"
	::= {wlsxTrapDefinitionsGroup 1086 }

	wlsxChannelRateAnomaly NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
				wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected frames on a channel which 
            exceed the configured IDS rate threshold.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0052
 			http://www.wve.org/entries/show/WVE-2005-0045
 			http://www.wve.org/entries/show/WVE-2005-0046
 			http://www.wve.org/entries/show/WVE-2005-0047
 			http://www.wve.org/entries/show/WVE-2005-0048
	"
	::= {wlsxTrapDefinitionsGroup 1087 }

	wlsxNodeRateAnomalyAP NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapSnr,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected frames transmitted by an 
            AP which exceed the configured IDS rate threshold.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0052
 			http://www.wve.org/entries/show/WVE-2005-0045
 			http://www.wve.org/entries/show/WVE-2005-0046
 			http://www.wve.org/entries/show/WVE-2005-0047
 			http://www.wve.org/entries/show/WVE-2005-0048
	"
	::= {wlsxTrapDefinitionsGroup 1088 }

	wlsxNodeRateAnomalySta NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapNodeMac,
				wlsxTrapSnr,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected frames transmitted by a 
            node which exceed the configured IDS rate threshold.
			"
	::= {wlsxTrapDefinitionsGroup 1089 }

	wlsxEAPRateAnomaly NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that the number of EAP Handshake packets 
            received by an AM exceeds the configured IDS EAP Handshake rate.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0049
	"
	::= {wlsxTrapDefinitionsGroup 1090 }

	wlsxSignalAnomaly NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
		    This trap indicates that an AM detected a Signal Anomaly.
			"
	::= {wlsxTrapDefinitionsGroup 1091 }

	wlsxSequenceNumberAnomalyAP NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapSnr,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM received packets from an AP
			which exceeds the acceptable sequence number difference. 
            The acceptable sequence number difference is an IDS configuration 
            object.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0061
 			http://www.wve.org/entries/show/WVE-2005-0019
 			http://www.wve.org/entries/show/WVE-2005-0008
 			http://www.wve.org/entries/show/WVE-2005-0045
 			http://www.wve.org/entries/show/WVE-2005-0046
 			http://www.wve.org/entries/show/WVE-2005-0047
 			http://www.wve.org/entries/show/WVE-2005-0048
	"
	::= {wlsxTrapDefinitionsGroup 1092 }

	wlsxSequenceNumberAnomalySta NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapSnr,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM received packets from a Node
			which exceeds the acceptable sequence number difference. 
            The acceptable sequence number difference is an IDS configuration 
            object.
                	For more info check: http://www.wve.org/entries/show/WVE-2005-0061
 			http://www.wve.org/entries/show/WVE-2005-0019
 			http://www.wve.org/entries/show/WVE-2005-0008
 			http://www.wve.org/entries/show/WVE-2005-0045
 			http://www.wve.org/entries/show/WVE-2005-0046
 			http://www.wve.org/entries/show/WVE-2005-0047
 			http://www.wve.org/entries/show/WVE-2005-0048
	"
	::= {wlsxTrapDefinitionsGroup 1093 }

	wlsxDisconnectStationAttack NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapSourceMac,
				wlsxTrapSnr,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected a station Disconnect 
            attack.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0045
 			http://www.wve.org/entries/show/WVE-2005-0046
 			http://www.wve.org/entries/show/WVE-2005-0048
	"
	::= {wlsxTrapDefinitionsGroup 1094 }

	wlsxApFloodAttack NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap is triggered when the number of spurious APs detected by 
			an AM exceeds the configured IDS threshold.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0056
	"
	::= {wlsxTrapDefinitionsGroup 1095 }

	wlsxAdhocNetwork NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapSnr,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected an Ad hoc 
			Network. An Station is connected to an ad hoc AP.
			"
	::= {wlsxTrapDefinitionsGroup 1096 }

	wlsxWirelessBridge NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTransmitterMac,wlsxTrapReceiverMac,
				wlsxTrapSnr,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected a Wireless Bridge. 
            The detected bridge is between wlsrSourceMac and wlsrReceiverMac.
			"
	::= {wlsxTrapDefinitionsGroup 1097 }

	wlsxInvalidMacOUIAP NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAddressType,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapSnr,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected an invalid MAC OUI in 
            transmission from an AP.
			"
	::= {wlsxTrapDefinitionsGroup 1098 }

	wlsxInvalidMacOUISta NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAddressType,wlsxTrapNodeMac,
				wlsxTrapSnr,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected an invalid MAC OUI in 
            transmission from a Station.
			"
	::= {wlsxTrapDefinitionsGroup 1099 }

	wlsxWEPMisconfiguration NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an access point has bad WEP
			configuration.
			"
	::= {wlsxTrapDefinitionsGroup 1100 }

	wlsxStaRepeatWEPIVViolation NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapNodeMac,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
				wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected a Repeat WEP-IV 
            violation for a Station
			"
	::= {wlsxTrapDefinitionsGroup 1101 }

	wlsxStaWeakWEPIVViolation NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapNodeMac,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
				wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected a Weak WEP-IV violation.
			for a Station
			"
	::= {wlsxTrapDefinitionsGroup 1102 }

	wlsxStaAssociatedToUnsecureAP NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapNodeMac,wlsxTrapAPLocation,
				wlsxTrapAPChannel,wlsxTrapRogueInfoURL}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM has detected a station associated
			with an Unsecure access point.
			"
	::= {wlsxTrapDefinitionsGroup 1103 }

	wlsxStaUnAssociatedFromUnsecureAP NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapNodeMac}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that a previously detected unsecure AP 
            association is no longer present.
			"
	::= {wlsxTrapDefinitionsGroup 1104 }

	wlsxAdhocNetworkBridgeDetected NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
				wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM has detected an Ad hoc
			network that is bridging to a wired network
			"
	::= {wlsxTrapDefinitionsGroup 1105 }

	wlsxInterferingApDetected NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel,
				wlsxTrapInterferingAPInfoURL}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an Interfering access point was detected
			by an Air Monitor located at wlsrLocation on channel 
			wlsrCurrentChannel. 
			"
	::= {wlsxTrapDefinitionsGroup 1106 }

	wlsxPortUp NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapCardSlot,wlsxTrapPortNumber,
				wlsxTrapAdminStatus,wlsxTrapOperStatus}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that a Physical port is up.
        	"
	::= {wlsxTrapDefinitionsGroup 1107 }

	wlsxPortDown NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapCardSlot,wlsxTrapPortNumber,
				wlsxTrapAdminStatus,wlsxTrapOperStatus}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that a Physical port is Down.
        	"
	::= {wlsxTrapDefinitionsGroup 1108 }

	wlsxBSSIDIsUp NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPBSSID}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that an access point up.
        	"
	::= {wlsxTrapDefinitionsGroup 1109 }

	wlsxBSSIDIsDown NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPBSSID}
		STATUS		current
		DESCRIPTION
			"			
            A Trap which indicates that an access point down.
        	"
	::= {wlsxTrapDefinitionsGroup 1110 }

	wlsxColdStart NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime}
		STATUS		current
		DESCRIPTION
			"			
            An enterprise version of cold start trap, which contains the controller time stamp.
        	"
	::= {wlsxTrapDefinitionsGroup 1111 }

	wlsxWarmStart NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime}
		STATUS		current
		DESCRIPTION
			"			
            An enterprise version of warm start trap, which contains the controller time stamp.
        	"
	::= {wlsxTrapDefinitionsGroup 1112 }

	wlsxAPImpersonation NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected Station Impersonation.
			"
	::= {wlsxTrapDefinitionsGroup 1113 }

	wlsxInformQueueOverFlow NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapHostIp,wlsxTrapHostPort}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an Inform queue overflow condition occured.
			"
	::= {wlsxTrapDefinitionsGroup 1114 }

	wlsxNAuthServerIsDown NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapAuthServerName}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that an authentication server is down.
        	"
	::= {wlsxTrapDefinitionsGroup 1115 }

	wlsxCTSTransferError NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapCTSTransferType,wlsxTrapCTSURL}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates the status of the configuration transfer from the management station.
        	"
	::= {wlsxTrapDefinitionsGroup 1116 }

	wlsxCTSTransferSucceeded NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapCTSTransferType,wlsxTrapCTSURL}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates the status of the configuration transfer from the management station.
        	"
	::= {wlsxTrapDefinitionsGroup 1117 }

	wlsxConfigurationUpdateError NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapConfigurationId,wlsxTrapUpdateFailureReason,
				wlsxTrapUpdateFailedObj}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates the configuration update status.
        	"
	::= {wlsxTrapDefinitionsGroup 1118 }

	wlsxConfigurationUpdateSucceeded NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapConfigurationId}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates the configuration update status.
        	"
	::= {wlsxTrapDefinitionsGroup 1119 }

	wlsxGlobalConfigurationChangeNotification NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapConfigurationId,wlsxTrapGlobalConfigObj}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that global configuration was modified on the controller.
        	"
	::= {wlsxTrapDefinitionsGroup 1120 }

	wlsxUserEntryChanged NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapUserIpAddress,
				wlsxTrapUserPhyAddress,wlsxTrapTableEntryChangeType}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the user configuration has changed.
        	"
	::= {wlsxTrapDefinitionsGroup 1121 }

	wlsxAPBssidEntryChanged NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPBSSID,
				wlsxTrapTableEntryChangeType}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the BSSID configuration has changed.
        	"
	::= {wlsxTrapDefinitionsGroup 1122 }

	wlsxAPRadioEntryChanged NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapTableEntryChangeType}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the Radio configuration has changed.
        	"
	::= {wlsxTrapDefinitionsGroup 1123 }

	wlsxAPEntryChanged NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
				wlsxTrapTableEntryChangeType}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the AP configuration has changed.
        	"
	::= {wlsxTrapDefinitionsGroup 1124 }

	wlsxSwitchListEntryChanged NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapSwitchIp,
				wlsxTrapTableEntryChangeType}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the controller list has changed.
        	"
	::= {wlsxTrapDefinitionsGroup 1125 }

	wlsxPortEntryChanged NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapCardSlot,
				wlsxTrapPortNumber,wlsxTrapTableEntryChangeType}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the port configuration has changed.
        	"
	::= {wlsxTrapDefinitionsGroup 1126 }

	wlsxVlanEntryChanged NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapVlanId,
				wlsxTrapTableEntryChangeType}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the VLAN configuration has changed.
        	"
	::= {wlsxTrapDefinitionsGroup 1127 }

	wlsxVlanInterfaceEntryChanged NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapVlanId,
				wlsxTrapTableEntryChangeType}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the VLAN Interface configuration has changed.
        	"
	::= {wlsxTrapDefinitionsGroup 1128 }

	wlsxWindowsBridgeDetected NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
				wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM has detected a station
		        that is bridging from a wireless network 
                        to a wired network
			"
	::= {wlsxTrapDefinitionsGroup 1129 }

	wlsxLicenseEntryChanged NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapLicenseId,
				wlsxTrapTableEntryChangeType}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the license table has changed.
        	"
	::= {wlsxTrapDefinitionsGroup 1130 }

	wlsxEsiServerChanged NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapESIServerName,
				wlsxTrapTableEntryChangeType}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the ESI server table has changed.
        	"
	::= {wlsxTrapDefinitionsGroup 1131 }

	wlsxMonAPEntryChanged NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapTargetAPBSSID,
				wlsxTrapTableEntryChangeType}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that a monitored AP entry changed
        	"
	::= {wlsxTrapDefinitionsGroup 1132 }

	wlsxMonStationEntryChanged NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapNodeMac,
				wlsxTrapTableEntryChangeType}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that a monitored station entry changed
        	"
	::= {wlsxTrapDefinitionsGroup 1133 }

	wlsxSignAPNetstumbler NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapSnr,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that the system detected a signature match for Netstumbler from an AP.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0025
	"
	::= {wlsxTrapDefinitionsGroup 1134 }

	wlsxSignStaNetstumbler NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
				wlsxTrapSnr,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that the system detected a signature match for Netstumbler from a Station.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0025
	"
	::= {wlsxTrapDefinitionsGroup 1135 }

	wlsxSignAPAsleap NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapSnr,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that the system detected a signature match for ASLEAP from an AP.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0027
	"
	::= {wlsxTrapDefinitionsGroup 1136 }

	wlsxSignStaAsleap NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
				wlsxTrapSnr,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that the system detected a signature match for ASLEAP from a Station.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0027
	"
	::= {wlsxTrapDefinitionsGroup 1137 }

	wlsxSignAPAirjack NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapSnr,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that the system detected a signature match for AirJack from an AP.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0018
	"
	::= {wlsxTrapDefinitionsGroup 1138 }

	wlsxSignStaAirjack NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
				wlsxTrapSnr,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that the system detected a signature match for AirJack from a Station.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0018
	"
	::= {wlsxTrapDefinitionsGroup 1139 }

	wlsxSignAPNullProbeResp NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapSnr,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that the system detected a signature match for Null-Probe-Response from an AP.
			For more info check: http://www.wve.org/entries/show/WVE-2006-0064
	"
	::= {wlsxTrapDefinitionsGroup 1140 }

	wlsxSignStaNullProbeResp NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
				wlsxTrapSnr,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that the system detected a signature match for Null-Probe-Response from a Station.
			For more info check: http://www.wve.org/entries/show/WVE-2006-0064
	"
	::= {wlsxTrapDefinitionsGroup 1141 }

	wlsxSignAPDeauthBcast NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapSnr,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that the system detected a signature match for Deauth-Broadcast from an AP.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0019
 			http://www.wve.org/entries/show/WVE-2005-0045
	"
	::= {wlsxTrapDefinitionsGroup 1142 }

	wlsxSignStaDeauthBcast NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
				wlsxTrapSnr,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that the system detected a signature match for Deauth-Broadcast from a Station.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0019
 			http://www.wve.org/entries/show/WVE-2005-0045
	"
	::= {wlsxTrapDefinitionsGroup 1143 }

	wlsxWindowsBridgeDetectedAP NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM has detected a station
		        that is bridging from a wireless network 
                        to a wired network
			"
	::= {wlsxTrapDefinitionsGroup 1144 }

	wlsxWindowsBridgeDetectedSta NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
				wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM has detected a station
		        that is bridging from a wireless network 
                        to a wired network
			"
	::= {wlsxTrapDefinitionsGroup 1145 }

	wlsxAdhocNetworkBridgeDetectedAP NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation,wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM has detected an Ad hoc
			network that is bridging to a wired network
			"
	::= {wlsxTrapDefinitionsGroup 1146 }

	wlsxAdhocNetworkBridgeDetectedSta NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
				wlsxTrapAPChannel}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM has detected an Ad hoc
			network that is bridging to a wired network
			"
	::= {wlsxTrapDefinitionsGroup 1147 }

	wlsxDisconnectStationAttackAP NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapTargetAPBSSID,
				wlsxTrapTargetAPSSID,wlsxTrapSnr,
				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
				wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected a station disconnect 
            attack.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0045
 			http://www.wve.org/entries/show/WVE-2005-0046
 			http://www.wve.org/entries/show/WVE-2005-0048
	"
	::= {wlsxTrapDefinitionsGroup 1148 }

	wlsxDisconnectStationAttackSta NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapSourceMac,
				wlsxTrapSnr,wlsxTrapAPMacAddress,
				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
		STATUS		current
		DESCRIPTION
			"			
			This trap indicates that an AM detected a station Disconnect 
            attack.
			For more info check: http://www.wve.org/entries/show/WVE-2005-0045
 			http://www.wve.org/entries/show/WVE-2005-0046
 			http://www.wve.org/entries/show/WVE-2005-0048
	"
	::= {wlsxTrapDefinitionsGroup 1149 }

	wlsxSuspectUnsecureAPDetected NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPRadioNumber,wlsxTrapMatchedMac,
				wlsxTrapMatchedIp,wlsxTrapConfidenceLevel,
				wlsxTrapAPLocation,wlsxTrapRogueInfoURL}
		STATUS		current
		DESCRIPTION
			"			
		This trap indicates that a suspected unsecure access point is 
                detected by a Controller. The AP is suspected to be unsecure 
                with the supplied confidence level, because it was matched to 
                the wired MAC address or IP address. 
			"
	::= {wlsxTrapDefinitionsGroup 1150 }

	wlsxSuspectUnsecureAPResolved NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
				wlsxTrapAPRadioNumber}
		STATUS		current
		DESCRIPTION
			"			
		This trap indicates that a previously detected suspected 
                unsecure access point is no longer present in the network, or
                has changed its state.
			"
	::= {wlsxTrapDefinitionsGroup 1151 }

	wlsxConfigurationLicenseMismatch NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapConfigurationId,wlsxTrapMissingLicenses}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates the configuration update status in the case
            where some configuration could not be applied due to missing licenses.
        	"
	::= {wlsxTrapDefinitionsGroup 1152 }

	wlsxVoiceCdrBufferThresholdReached NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxVoiceCurrentNumCdr}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the CDR buffer threshold has been reached
        	"
	::= {wlsxTrapDefinitionsGroup 1153 }

	wlsxTunnelUp NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTunnelId,wlsxTrapTunnelUpReason,
				wlsxTrapTunnelStatus}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that a tunnel interface is up.
        	"
	::= {wlsxTrapDefinitionsGroup 1154 }

	wlsxTunnelDown NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTunnelId,wlsxTrapTunnelDownReason,
				wlsxTrapTunnelStatus}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that a tunnel interface is down.
        	"
	::= {wlsxTrapDefinitionsGroup 1155 }

	wlsxMeshNodeEntryChanged NOTIFICATION-TYPE
		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
				wlsxTrapTableEntryChangeType}
		STATUS		current
		DESCRIPTION
			"			
            This trap indicates that the mesh node configuration has changed.
        	"
	::= {wlsxTrapDefinitionsGroup 1156 }

END