-- ***************************************************************** -- CISCO-POWER-ETHERNET-EXT-MIB -- -- March 2004, Seth Wang -- -- Copyright (c) 2004-2007 by Cisco Systems, Inc. -- -- All rights reserved. -- **************************************************************** CISCO-POWER-ETHERNET-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, NOTIFICATION-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TruthValue FROM SNMPv2-TC pethPsePortEntry, pethMainPseGroupIndex FROM POWER-ETHERNET-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB EntPhysicalIndexOrZero FROM CISCO-TC ciscoMgmt FROM CISCO-SMI; ciscoPowerEthernetExtMIB MODULE-IDENTITY LAST-UPDATED "200704120000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-lan-switch-snmp@cisco.com" DESCRIPTION "A MIB module for extending the POWER-ETHERNET-MIB (RFC3621) to add objects which provide additional management information about Power Sourcing Equipment (PSE) not available in POWER-ETHERNET-MIB. Glossary Power Sourcing Equipment (PSE) These are devices supplying electrical power to other equipment. They are, for example, inline power switches, inline power daughterboards and power patch panels. Powered Device (PD) These are devices receiving their electrical power supply from Power Sourcing Equipment. They are, for example, IP telephones and wireless access points or bridges." REVISION "200704120000Z" DESCRIPTION "Added 'overdrawLog' value to cpeExtPsePortAdditionalStatus. Added cpeExtPortPolicingActionGroup, cpeExtPortPwrManAllocGroup cpeExtPolicingNotifEnableGroup, and cpeExtPolicingNotifGroup." REVISION "200702020000Z" DESCRIPTION "Added cpeExtPsePortEntPhyIndex, cpeExtPsePortPolicingCapable and cpeExtPsePortPolicingEnable to cpeExtPsePortTable. Added cpeExtPdStatsTotalDevices and cpeExtPdStatsTable. Added enumerated value disable(5) to cpeExtPsePortEnable." REVISION "200506100000Z" DESCRIPTION "Added 'limit' to cpeExtPsePortEnable, 'overdraw' to cpeExtPsePortAdditionalStatus and the groups cpeExtPsePortPwrMonitorGroup and cpeExtMainPseGroup." REVISION "200404120000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 402 } cpeExtMIBNotifs OBJECT IDENTIFIER ::= { ciscoPowerEthernetExtMIB 0 } cpeExtMIBObjects OBJECT IDENTIFIER ::= { ciscoPowerEthernetExtMIB 1 } cpeExtMIBConformance OBJECT IDENTIFIER ::= { ciscoPowerEthernetExtMIB 2 } cpeExtDefaultAllocation OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliwatts" MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the default inline power allocation per port. This is a global configuration parameter that applies to all inline power capable ports in the system. The system must consider this object as well as the per port configuration object, cpeExtPsePortPwrMax, when determining how much power to allocate to a port. The system will use the lower of the two numbers." ::= { cpeExtMIBObjects 1 } cpeExtPsePortTable OBJECT-TYPE SYNTAX SEQUENCE OF CpeExtPsePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table extends the POWER-ETHERNET-MIB pethPsePortTable for power Ethernet ports on a Powered Sourcing Equipment (PSE) device." REFERENCE "RFC3621" ::= { cpeExtMIBObjects 2 } cpeExtPsePortEntry OBJECT-TYPE SYNTAX CpeExtPsePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A cpeExtPsePortEntry extends a corresponding pethPsePortTable entry. This entry displays and controls more characteristics of a power Ethernet port on a PSE device." AUGMENTS { pethPsePortEntry } ::= { cpeExtPsePortTable 1 } CpeExtPsePortEntry ::= SEQUENCE { cpeExtPsePortEnable INTEGER , cpeExtPsePortDiscoverMode INTEGER , cpeExtPsePortDeviceDetected TruthValue, cpeExtPsePortIeeePd TruthValue, cpeExtPsePortAdditionalStatus BITS, cpeExtPsePortPwrMax Unsigned32, cpeExtPsePortPwrAllocated Unsigned32, cpeExtPsePortPwrAvailable Unsigned32, cpeExtPsePortPwrConsumption Unsigned32, cpeExtPsePortMaxPwrDrawn Unsigned32, cpeExtPsePortEntPhyIndex EntPhysicalIndexOrZero, cpeExtPsePortPolicingCapable TruthValue, cpeExtPsePortPolicingEnable INTEGER , cpeExtPsePortPolicingAction INTEGER , cpeExtPsePortPwrManAlloc Unsigned32 } cpeExtPsePortEnable OBJECT-TYPE SYNTAX INTEGER { auto(1), static(2), limit(3), disable(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is an extension of the pethPsePortAdminEnable object from RFC3621. It allows the user to be more specific when enabling the PSE functions. The states, 'auto', 'static' and 'limit' correspond to a value of 'true' for the pethPsePortAdminEnable object. The state 'disable' corresponds to a value of 'false' for the pethPsePortAdminEnable object. Setting this value to 'auto' enables Powered Device discovery on the interface and the amount of power allocated depends on the Powered Device discovered. If pethPsePortAdminEnable was 'false' prior to this set operation, then it will become 'true'. Setting this value to 'static' will also enable Powered Device discovery. However, this is different from 'auto' in that the amount of power is pre-allocated based on the configuration on the Power Sourcing Equipment. If pethPsePortAdminEnable was 'false' prior to this set operation, then it will become 'true'. Setting this value to 'limit' enables Powered Device discovery on the interface. The amount of power allocated depends on the Powered Device discovered and the value of cpeExtPsePortPwrMax. The lower value will be used. If pethPsePortAdminEnable was 'false' prior to this set operation, then it will become 'true'. Setting this value to 'disable' disables the PSE functions. The pethPsePortAdminEnable object will adopt the value of 'false' if it was 'true' prior to this set operation. When setting the pethPsePortAdminEnable object to 'false' this object cpeExtPsePortEnable will adopt the value of 'disable'. If cpeExtPsePortPolicingCapable of the PSE port, or cpeExtMainPsePwrMonitorCapable of the PSE port's main group, has the value of 'false', this object can only be set to 'auto', 'static' or 'disable'. Otherwise, this object can be set to 'auto', 'static', 'limit' or 'disable'." ::= { cpeExtPsePortEntry 1 } cpeExtPsePortDiscoverMode OBJECT-TYPE SYNTAX INTEGER { unknown(1), off(2), ieee(3), cisco(4), ieeeAndCisco(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the discover mode used by the system to discover the PD. A value of 'unknown' indicates that the discover mode on the interface is unknown. A value of 'off' indicates that discovery is disabled on the interface. A value of 'ieee' indicates that the discover mode on the interface is IEEE based. A value of 'cisco' indicates that the discover mode on the interface is Cisco based. A value of 'ieeeAndCisco' indicates that the discover mode on the interface is both IEEE and Cisco based." ::= { cpeExtPsePortEntry 2 } cpeExtPsePortDeviceDetected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates if a Powered Device (PD) has been detected on the interface. A value of 'true' indicates that a PD has been detected on the interface. A value of 'false' indicates that no PD has been detected on the interface." ::= { cpeExtPsePortEntry 3 } cpeExtPsePortIeeePd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the Powered Device attached to the interface is an IEEE compliant Powered Device or not. A value of 'true' indicates the attached Powered Device is an IEEE compliant Powered Device. A value of 'false' indicates the attached Powered Device is not an IEEE compliant Powered Device. This also means that the value of the corresponding object from the pethPsePortTable, pethPsePortPowerClassifications is irrelevant." ::= { cpeExtPsePortEntry 4 } cpeExtPsePortAdditionalStatus OBJECT-TYPE SYNTAX BITS { deny(0), overdraw(1), overdrawLog(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is an extension of the pethPsePortDetectionStatus object from RFC3621 and provides additional status information. deny: When set, the PD attached to the interface is being denied power due to insufficient power resources on the Power Sourcing Equipment. overdraw: When set, the PD attached to the interface is being denied power because the PD is trying to consume more power than it has been configured to consume. overdrawLog: When set, the PD attached to the interface is trying to consume more power than it has been configured to consume, but is not being denied power." ::= { cpeExtPsePortEntry 5 } cpeExtPsePortPwrMax OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliwatts" MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the maximum amount of power that the PSE will make available to the PD connected to this interface." ::= { cpeExtPsePortEntry 6 } cpeExtPsePortPwrAllocated OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliwatts" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the amount of power allocated from the PSE for the PD." ::= { cpeExtPsePortEntry 7 } cpeExtPsePortPwrAvailable OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliwatts" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the amount of power available for the PD to use. This value may differ from the value cpeExtPsePortPwrAllocated due to the efficiency issues of delivering the power from the PSE to the PD. When sufficient power is available to power a PD, this value should be equal to the lower of the two objects, cpeExtDefaultAllocation and cpeExtPsePortPwrMax." ::= { cpeExtPsePortEntry 8 } cpeExtPsePortPwrConsumption OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliwatts" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the actual power consumption of the PD connected to this interface. It may not necessarily be equal to the value of cpeExtPsePortPwrAvailable." ::= { cpeExtPsePortEntry 9 } cpeExtPsePortMaxPwrDrawn OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliwatts" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the maximum amount of power drawn by the PD connected to this interface, since it was powered on." ::= { cpeExtPsePortEntry 10 } cpeExtPsePortEntPhyIndex OBJECT-TYPE SYNTAX EntPhysicalIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The entPhysicalIndex value that uniquely identifies the PSE port. If the PSE port does not have a corresponding physical entry in entPhysicalTable or if the entPhysicalTable is not supported by the management system, this object has the value of zero." REFERENCE "RFC 2737, entPhysicalIndex." ::= { cpeExtPsePortEntry 11 } cpeExtPsePortPolicingCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the PSE port hardware is capable of policing the port for proper power consumption based on the allocated value." ::= { cpeExtPsePortEntry 12 } cpeExtPsePortPolicingEnable OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the user to turn on or turn off the power policing of the PSE port. If the instance value of cpeExtPsePortPolicingCapable is 'TRUE', the user is allowed to set this object to 'on' or 'off'. Otherwise, this object is read-only and always has the value of 'off'." ::= { cpeExtPsePortEntry 13 } cpeExtPsePortPolicingAction OBJECT-TYPE SYNTAX INTEGER { deny(1), logOnly(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the power policing action that the device will take on this PSE port when the real-time power consumption exceeds its max power allocation if the value of cpeExtPsePortPolicingEnable is 'on'. 'deny' - the device will deny the power to the PSE port 'logOnly' - the device will not deny the power to the PSE port" ::= { cpeExtPsePortEntry 14 } cpeExtPsePortPwrManAlloc OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliwatts" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the manual power allocation that the PSE will allocate to the PD connected to this interface regardless of the amount requested via CDP or IEEE. Setting this object value to zero disables the manual power allocation. Warning: Misconfiguring this manual power allocation may cause demage to the system and void the warranty. Take precautions not to oversubscribe the power supply." ::= { cpeExtPsePortEntry 15 } cpeExtMainPseTable OBJECT-TYPE SYNTAX SEQUENCE OF CpeExtMainPseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the additional information for the main PSE group in pethMainPseTable." REFERENCE "RFC3621, pethMainPseTable" ::= { cpeExtMIBObjects 3 } cpeExtMainPseEntry OBJECT-TYPE SYNTAX CpeExtMainPseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A cpeExtMainPseEntry contains information about a particular pethMainPseGroupIndex. An entry is created by the agent when a main PSE group is added to the pethMainPseTable. An entry is deleted by the agent when a main PSE group is removed from the pethMainPseTable." REFERENCE "RFC3621, pethMainPseTable" INDEX { pethMainPseGroupIndex } ::= { cpeExtMainPseTable 1 } CpeExtMainPseEntry ::= SEQUENCE { cpeExtMainPseEntPhyIndex EntPhysicalIndexOrZero, cpeExtMainPseDescr SnmpAdminString, cpeExtMainPsePwrMonitorCapable TruthValue } cpeExtMainPseEntPhyIndex OBJECT-TYPE SYNTAX EntPhysicalIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The entPhysicalIndex value that uniquely identifies the main PSE group. If the main PSE group does not have a corresponding physical entry in entPhysicalTable or if the entPhysicalTable is not supported by the management system, then this object has the value of zero." REFERENCE "RFC 2737, entPhysicalIndex." ::= { cpeExtMainPseEntry 1 } cpeExtMainPseDescr OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing information about the Power Source Equipment (PSE) group." ::= { cpeExtMainPseEntry 2 } cpeExtMainPsePwrMonitorCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates if the given group is capable of monitoring the power consumption of the interfaces that belong to the group. The value 'true' means that the group is capable. The value 'false' means that the group in not capable." ::= { cpeExtMainPseEntry 3 } cpeExtPdStatistics OBJECT IDENTIFIER ::= { cpeExtMIBObjects 4 } cpeExtPdStatsTotalDevices OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of the powered devices with any power classifications in the system. Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements." REFERENCE "IEEE Std 802.3af Section 30.9.1.1.6 aPSEPowerClassification" ::= { cpeExtPdStatistics 1 } cpeExtPdStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CpeExtPdStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the statistics information of the powered devices fallen into different power classifications in the system." REFERENCE "IEEE Std 802.3af Section 30.9.1.1.6 aPSEPowerClassification" ::= { cpeExtPdStatistics 2 } cpeExtPdStatsEntry OBJECT-TYPE SYNTAX CpeExtPdStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A cpeExtPdStatsEntry contains the statistics information about a particular power classification defined in cpeExtPdStatsIndex." INDEX { cpeExtPdStatsClass } ::= { cpeExtPdStatsTable 1 } CpeExtPdStatsEntry ::= SEQUENCE { cpeExtPdStatsClass INTEGER , cpeExtPdStatsDeviceCount Unsigned32 } cpeExtPdStatsClass OBJECT-TYPE SYNTAX INTEGER { cisco(1), class0(2), class1(3), class2(4), class3(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The power classification as the index for the statistics information for powered devices. A value of 'cisco' indicates that the powered devices are CISCO proprietary and their power classification does not fall into any class in IEEE specifications. A value of 'class0' indicates that the power classification of the powered devices falls into class 0 in IEEE specifications. A value of 'class1' indicates that the power classification of the powered devices falls into class 1 in IEEE specifications. A value of 'class2' indicates that the power classification of the powered devices falls into class 2 in IEEE specifications. A value of 'class3' indicates that the power classification of the powered devices falls into class 3 in IEEE specifications." REFERENCE "IEEE Std 802.3af Section 30.9.1.1.6 aPSEPowerClassification" ::= { cpeExtPdStatsEntry 1 } cpeExtPdStatsDeviceCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the count of the powered devices whose power classification falls into a specific value of cpeExtPdStatsIndex." ::= { cpeExtPdStatsEntry 2 } cpeExtPolicingNotifEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable/disable the the cpeExtPolicingNotif notification." ::= { cpeExtMIBObjects 5 } -- Notifications cpeExtPolicingNotif NOTIFICATION-TYPE OBJECTS { cpeExtPsePortPolicingAction, cpeExtPsePortAdditionalStatus, cpeExtPsePortPwrAllocated, cpeExtPsePortMaxPwrDrawn } STATUS current DESCRIPTION "This notification is generated when the value of cpeExtPsePortAdditionalStatus changes." ::= { cpeExtMIBNotifs 1 } -- Conformance cpeExtMIBCompliances OBJECT IDENTIFIER ::= { cpeExtMIBConformance 1 } cpeExtMIBGroups OBJECT IDENTIFIER ::= { cpeExtMIBConformance 2 } cpeExtMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for the CISCO-POWER-ETHERNET-EXT-MIB." MODULE -- this module MANDATORY-GROUPS { cpeExtPsePortGroup } GROUP cpeExtPsePortGlobalConfigGroup DESCRIPTION "The cpeExtPsePortGlobalConfigGroup is mandatory for agents that support global configurations on the PSE interfaces." ::= { cpeExtMIBCompliances 1 } cpeExtMIBCompliance2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for the CISCO-POWER-ETHERNET-EXT-MIB." MODULE -- this module MANDATORY-GROUPS { cpeExtPsePortGroup } GROUP cpeExtPsePortGlobalConfigGroup DESCRIPTION "The cpeExtPsePortGlobalConfigGroup is mandatory for agents that support global configurations on the PSE interfaces." GROUP cpeExtPsePortPwrMonitorGroup DESCRIPTION "The cpeExtPsePortPwrMonitorGroup is mandatory for agents that provide power monitoring on PD's connected to the PSE interfaces." GROUP cpeExtMainPseGroup DESCRIPTION "The cpeExtMainPseGroup is mandatory for agents that support the interface power consumption monitoring, or need additional info to identify the PSE group." ::= { cpeExtMIBCompliances 2 } cpeExtMIBCompliance3 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the CISCO-POWER-ETHERNET-EXT-MIB." MODULE -- this module MANDATORY-GROUPS { cpeExtPsePortGroup } GROUP cpeExtPsePortGlobalConfigGroup DESCRIPTION "The cpeExtPsePortGlobalConfigGroup is mandatory for agents that support global configurations on the PSE interfaces." GROUP cpeExtPsePortPwrMonitorGroup DESCRIPTION "The cpeExtPsePortPwrMonitorGroup is mandatory for agents that provide power monitoring on PD's connected to the PSE interfaces." GROUP cpeExtMainPseGroup2 DESCRIPTION "The cpeExtMainPseGroup2 is mandatory for agents that need additional information to identify the PSE group." GROUP cpeExtPseGrpPwrGroup DESCRIPTION "The cpeExtPseGrpPwrGroup is mandatory for agents that support the power consumption monitoring for PSE groups." GROUP cpeExtPortEntityIndexGroup DESCRIPTION "The cpeExtPortEntityIndexGroup is mandatory for agents that needs additional info to identify the interfaces of the PSE port." GROUP cpeExtPortPolicingGroup DESCRIPTION "The cpeExtPortPolicingGroup is mandatory for agents that provide power consumption policing for the PSE ports." GROUP cpeExtPdStatsGroup DESCRIPTION "The cpeExtPdStatsGroup is mandatory for agents that provide the statistics information for powered devices." GROUP cpeExtPortPolicingActionGroup DESCRIPTION "The cpeExtPortPolicingActionGroup is mandatory for agents that provide control of the power policing action." GROUP cpeExtPortPwrManAllocGroup DESCRIPTION "The cpeExtPortPolicingActionGroup is mandatory for agents that provide manual power allocation." GROUP cpeExtPolicingNotifEnableGroup DESCRIPTION "The cpeExtPolicingNotifEnableGroup is mandatory for agents that provide notifications of power consumption policing status for the PSE ports." GROUP cpeExtPolicingNotifGroup DESCRIPTION "The cpeExtPolicingNotifGroup is mandatory for agents that provide notifications of power consumption policing status for the PSE ports." ::= { cpeExtMIBCompliances 3 } -- Units of Conformance cpeExtPsePortGroup OBJECT-GROUP OBJECTS { cpeExtPsePortEnable, cpeExtPsePortDiscoverMode, cpeExtPsePortDeviceDetected, cpeExtPsePortIeeePd, cpeExtPsePortAdditionalStatus, cpeExtPsePortPwrMax, cpeExtPsePortPwrAllocated, cpeExtPsePortPwrAvailable, cpeExtPsePortPwrConsumption } STATUS current DESCRIPTION "This group provides information and configuration objects in addition to those provided in the POWER-ETHERNET-MIB (RFC3621)." ::= { cpeExtMIBGroups 1 } cpeExtPsePortGlobalConfigGroup OBJECT-GROUP OBJECTS { cpeExtDefaultAllocation } STATUS current DESCRIPTION "This is a collection of objects which provide global configuration of the PSE interfaces." ::= { cpeExtMIBGroups 2 } cpeExtPsePortPwrMonitorGroup OBJECT-GROUP OBJECTS { cpeExtPsePortMaxPwrDrawn } STATUS current DESCRIPTION "This is a collection of objects which provide power monitoring on PD's connected to the PSE interfaces." ::= { cpeExtMIBGroups 3 } cpeExtMainPseGroup OBJECT-GROUP OBJECTS { cpeExtMainPseEntPhyIndex, cpeExtMainPseDescr, cpeExtMainPsePwrMonitorCapable } STATUS deprecated DESCRIPTION "This is a collection of objects which provide additional information for the PSE group." ::= { cpeExtMIBGroups 4 } cpeExtPortEntityIndexGroup OBJECT-GROUP OBJECTS { cpeExtPsePortEntPhyIndex } STATUS current DESCRIPTION "This is a collection of objects which provide entity physical index information for PSE port." ::= { cpeExtMIBGroups 5 } cpeExtPortPolicingGroup OBJECT-GROUP OBJECTS { cpeExtPsePortPolicingCapable, cpeExtPsePortPolicingEnable } STATUS current DESCRIPTION "This is a collection of objects which provide the hardware power consumption policing information for PSE port." ::= { cpeExtMIBGroups 6 } cpeExtPdStatsGroup OBJECT-GROUP OBJECTS { cpeExtPdStatsTotalDevices, cpeExtPdStatsDeviceCount } STATUS current DESCRIPTION "This is a collection of objects which provide the statistics information for powered devices." ::= { cpeExtMIBGroups 7 } cpeExtMainPseGroup2 OBJECT-GROUP OBJECTS { cpeExtMainPseEntPhyIndex, cpeExtMainPseDescr } STATUS current DESCRIPTION "This is a collection of objects which provide additional information to identify the PSE group." ::= { cpeExtMIBGroups 8 } cpeExtPseGrpPwrGroup OBJECT-GROUP OBJECTS { cpeExtMainPsePwrMonitorCapable } STATUS current DESCRIPTION "This is a collection of objects which provide power monitoring information for the PSE group." ::= { cpeExtMIBGroups 9 } cpeExtPortPolicingActionGroup OBJECT-GROUP OBJECTS { cpeExtPsePortPolicingAction } STATUS current DESCRIPTION "This is a collection of objects which provide control of the power policing action of the PSE port." ::= { cpeExtMIBGroups 10 } cpeExtPortPwrManAllocGroup OBJECT-GROUP OBJECTS { cpeExtPsePortPwrManAlloc } STATUS current DESCRIPTION "This is a collection of objects which provide manual power allocation for the PSE port." ::= { cpeExtMIBGroups 11 } cpeExtPolicingNotifEnableGroup OBJECT-GROUP OBJECTS { cpeExtPolicingNotifEnable } STATUS current DESCRIPTION "A collection of object that provides control over power consumption policing status notification." ::= { cpeExtMIBGroups 12 } cpeExtPolicingNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { cpeExtPolicingNotif } STATUS current DESCRIPTION "This is a collection of notifications related to power consumption policing information for PSE ports." ::= { cpeExtMIBGroups 13 } END