-- SECTION 1: Top Level Definitions

S5-COMMON-STATS-MIB DEFINITIONS ::= BEGIN


-- 5000 Common Statistics MIB Release 1.1.2
-- Revision 04/18/94

-- Copyright 1993-94 SynOptics Communications, Inc.
-- All rights reserved.
-- This SynOptics SNMP Management Information Base Specification
-- (Specification) embodies SynOptics' confidential and
-- proprietary intellectual property. SynOptics retains all
-- title and ownership in the Specification, including any
-- revisions.

-- This Specification is supplied "AS IS," and SynOptics makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.


-- Imports

IMPORTS
	OBJECT-TYPE
		FROM RFC-1212
	TimeTicks
		FROM RFC1155-SMI
	s5Com
		FROM S5-ROOT-MIB
	MacAddress
		FROM SNMPv2-TC;


-- Groups

-- Statistics
s5CmStat	OBJECT IDENTIFIER ::= { s5Com 1 }


-- SECTION 2: MIB Objects


-- Show Nodes Table

s5CmSNodeTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF S5CmSNodeEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A Table of MAC addresses of active nodes, which are
		detected to be connected to the concentrator.
		These nodes may be directly connected to the
		concentrator or may be indirectly connected via
		an interconnect port, bridge or switch.  The definition
		of active node is provided by s5CmSNodeStatus.

		The object s5CmSNodeIfIndex specifies the
		source that is used to detect MAC addresses.  When the
		source is not an interface, the agent uses best effort to
		detect entries.  These entries may, but are not required
		to be, MACs from media types other than the interfaces
		for the agent.

		This table is indexed by source of the detection,
		board, port, and MAC address of the node.  This 
		table is indexed differently from the FindNodes
		table which uses only the source of the detection
		and MAC address of the node.  Note: a MAC
		address could appear multiple times in this
		table (on different board and port)."
	::= { s5CmStat 1 }

s5CmSNodeEntry OBJECT-TYPE
	SYNTAX	S5CmSNodeEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A row in the Show Node table.
		Entries can not be created or deleted via
		SNMP."
	INDEX	{ s5CmSNodeIfIndx,
		  s5CmSNodeBrdIndx,
		  s5CmSNodePortIndx,
		  s5CmSNodeMacAddr }
	::= { s5CmSNodeTable 1 }

S5CmSNodeEntry ::= SEQUENCE {
	s5CmSNodeIfIndx INTEGER,
	s5CmSNodeBrdIndx INTEGER,
	s5CmSNodePortIndx INTEGER,
	s5CmSNodeMacAddr MacAddress,
	s5CmSNodeStatus INTEGER
	}

s5CmSNodeIfIndx OBJECT-TYPE
	SYNTAX	INTEGER(0..65535)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"An integer value representing the source
		that detected the active node.  A value greater
		than zero is the index of the agent's interface
		in the NMM.  This is the same value as ifIndex 
		for the interface.  A value of zero indicates
		that the agent detected the node information via
		best available efforts.  The nodes may be, but are
		note required to be, from media types other than
		the interfaces for the agent."
	::= { s5CmSNodeEntry 1 }

s5CmSNodeBrdIndx OBJECT-TYPE
	SYNTAX	INTEGER (1..255)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index of the board. This corresponds to
		the index of the slot containing the board."
	::= { s5CmSNodeEntry 2 }

s5CmSNodePortIndx OBJECT-TYPE
	SYNTAX	INTEGER (1..255)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index of the port on the board. Its
		value ranges between 1 and index of the last
		manageable port on the board."
	::= { s5CmSNodeEntry 3 }

s5CmSNodeMacAddr OBJECT-TYPE
	SYNTAX	MacAddress
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The MAC address of the station."
	::= { s5CmSNodeEntry 4 }

s5CmSNodeStatus OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		active(2),
		inactive(3)
		}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The status of the MAC address for a station.
		The meaning varies depending on the media type
		of the NMM reporting the status. The values are:
		  other(1)......unknown or other
		  active(2).....the station is actively sending
		                  and receiving, or
		                  participating
		                  in the ring poll
		  inactive(3)...the station is idle

		For Ethernet, active(2) means that the station
		has sent a frame in the last N seconds and
		inactive(3) means the station has not sent a
		frame in the last N seconds. N is specified by
		the s5EnNodeInactInterval object, which is
		defined in the 5000 Ethernet MIB.  The status of
		other(3) is reported when the current status of
		the station is unknown.

		For Token Ring and FDDI, the status of a station
		will always be reported as active(2) since it is
		based on being in the ring poll.  When no longer
		in the ring poll, a station is removed from the
		table."
	::= { s5CmSNodeEntry 5 }


-- Find Nodes Table

s5CmFNodeTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF S5CmFNodeEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A Table of MAC addresses of active nodes, which are
		detected to be connected to the concentrator.
		These nodes may be directly connected to the
		concentrator or may be indirectly connected via
		an interconnect port, bridge or switch.  The definition
		of active node is provided by s5CmSNodeStatus.

		The object s5CmSNodeIfIndex specifies the
		source that is used to detect MAC addresses.  When the
		source is not an interface, the agent uses best effort to
		detect entries.  These entries may, but are not required
		to be, MACs from media types other than the interfaces
		for the agent.

		This table is indexed by source of the detection
		and MAC address of the node.  This 
		table is indexed differently from the ShowNodes
		table which uses the source of the detection,
		board, port, and MAC address of the node.

		Note: The same MAC may be detected at several
		locations.  The entry in this table is the last 
		detected location.  In addition, more than one
		MAC address could appear on the same board
		and port."
	::= { s5CmStat 2 }

s5CmFNodeEntry OBJECT-TYPE
	SYNTAX	S5CmFNodeEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A row in the Find Node table.
		Entries can not be created or deleted via
		SNMP."
	INDEX	{ s5CmFNodeIfIndx,
		  s5CmFNodeMacAddr }
	::= { s5CmFNodeTable 1 }

S5CmFNodeEntry ::= SEQUENCE {
	s5CmFNodeIfIndx INTEGER,
	s5CmFNodeMacAddr MacAddress,
	s5CmFNodeBrdIndx INTEGER,
	s5CmFNodePortIndx INTEGER
	}

s5CmFNodeIfIndx OBJECT-TYPE
	SYNTAX	INTEGER(0..65535)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"An integer value representing the source
		that detected the active node.  A value greater
		than zero is the index of the agent's interface
		in the NMM.  This is the same value as ifIndex 
		for the interface.  A value of zero indicates
		that the agent detected the node information via
		best available efforts.  The nodes may be, but are
		note required to be, from media types other than
		the interfaces for the agent."
	::= { s5CmFNodeEntry 1 }

s5CmFNodeMacAddr OBJECT-TYPE
	SYNTAX	MacAddress
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"MAC address of the station."
	::= { s5CmFNodeEntry 2 }

s5CmFNodeBrdIndx OBJECT-TYPE
	SYNTAX	INTEGER (0..255)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index of the board.  This corresponds to
		the index of the slot containing the board.  The
		value of zero has the special meaning that the
		true board index value is currently unknown.
		Note that the syntax of this object is not
		identical to s5CmSNodeBrdIndx."
	::= { s5CmFNodeEntry 3 }

s5CmFNodePortIndx OBJECT-TYPE
	SYNTAX	INTEGER (0..255)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index of the port on the board.  This
		corresponds to the index of one of the
		manageable ports on the board.  The value of
		zero has the special meaning that the true port
		index value is currently unknown.
		Note that the syntax of this object is not
		identical to s5CmSNodePortIndx."
	::= { s5CmFNodeEntry 4 }


-- Per-port Network to MAC Address Mapping Table

s5CmNetAddrTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF S5CmNetAddrEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A table of network layer addresses associated
		with MAC addresses of active nodes, which are
		detected to be connected to the concentrator.

		This table is indexed by the interface it was
		detected, the board and port the node is connected,
		the MAC address of the node and an integer index 
		(enumerating multiple network addresses).

		Note:
		Only a small implementation determined number of 
		network addresses are stored. The oldest one is 
		discarded, so that the most recent one may be
		retained.  When packet decoding is switched off
		entries in the network address mapping table may
		remain present for some time, but no new addresses
		are added.  An network address could appear multiple
		times in this table (on different board and port)
		and can appear under different s5CmNetAddrNetIndx
		over time."
	::= { s5CmStat 3 }

s5CmNetAddrEntry OBJECT-TYPE
	SYNTAX	S5CmNetAddrEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A row in the network address mapping table.
		Entries can not be created or deleted
		via SNMP."
	INDEX	{ s5CmNetAddrIfIndex, 
		  s5CmNetAddrBrdIndx, 
		  s5CmNetAddrPortIndx, 
		  s5CmNetAddrMacAddr, 
		  s5CmNetAddrNetIndx }
	::= { s5CmNetAddrTable 1 }

S5CmNetAddrEntry ::= SEQUENCE {
	s5CmNetAddrIfIndex INTEGER,
	s5CmNetAddrBrdIndx INTEGER,
	s5CmNetAddrPortIndx INTEGER,
	s5CmNetAddrMacAddr MacAddress,
	s5CmNetAddrNetIndx INTEGER,
	s5CmNetAddrType INTEGER,
	s5CmNetAddrAddr OCTET STRING,
	s5CmNetAddrLastSeen TimeTicks
	}

s5CmNetAddrIfIndex OBJECT-TYPE
	SYNTAX	INTEGER (1..65535)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index of the interface on the NMM on 
		which the address was detected. This is the 
		same as the ifIndex."
	::= { s5CmNetAddrEntry 1 }


s5CmNetAddrBrdIndx OBJECT-TYPE
	SYNTAX	INTEGER (1..255)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index of the board. This corresponds to
		the index of the slot containing the board."
	::= { s5CmNetAddrEntry 2 }


s5CmNetAddrPortIndx OBJECT-TYPE
	SYNTAX	INTEGER (1..255)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index of the port on the board."
	::= { s5CmNetAddrEntry 3 }

s5CmNetAddrMacAddr OBJECT-TYPE
	SYNTAX	MacAddress
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The MAC address of the station."
	::= { s5CmNetAddrEntry 4 }

s5CmNetAddrNetIndx OBJECT-TYPE
	SYNTAX	INTEGER (1..255)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The sequence number of the network address."
	::= { s5CmNetAddrEntry 5 }

s5CmNetAddrType OBJECT-TYPE
	SYNTAX	INTEGER {
		ip(1)
		}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The type of network layer address:
		  ip(1).....an IP address as defined in RFC 791."
	::= { s5CmNetAddrEntry 6 }

s5CmNetAddrAddr OBJECT-TYPE
	SYNTAX	OCTET STRING
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The network layer address of the station represented
		in network byte-order"
	::= { s5CmNetAddrEntry 7 }

s5CmNetAddrLastSeen OBJECT-TYPE
	SYNTAX	TimeTicks
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The value of sysUpTime at the time this network
		address was last seen on this interface/board/port/MAC."
	::= { s5CmNetAddrEntry 8 }


END