CISCOSB-CDP-MIB DEFINITIONS ::= BEGIN -- Title: CISCOSB CDP ROS -- This Private MIB provides the port and global information concerning CDP protocol -- Version: 7.47 -- Date: 14 Sep 2008 IMPORTS switch001, rndNotifications FROM CISCOSB-MIB rndErrorDesc, rndErrorSeverity FROM CISCOSB-DEVICEPARAMS-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB OBJECT-TYPE, IpAddress, Unsigned32, MODULE-IDENTITY,Counter32 FROM SNMPv2-SMI DisplayString, TEXTUAL-CONVENTION, MacAddress, TruthValue FROM SNMPv2-TC PortList FROM Q-BRIDGE-MIB VlanId FROM Q-BRIDGE-MIB InterfaceIndexOrZero, InterfaceIndex FROM IF-MIB cdpCacheEntry, cdpCacheIfIndex, cdpCacheDeviceIndex FROM CISCO-CDP-MIB; rlCdp MODULE-IDENTITY LAST-UPDATED "201102150000Z" ORGANIZATION "Cisco Small Business" CONTACT-INFO "Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Home http://www.cisco.com/smb>;, Cisco Small Business Support Community " DESCRIPTION "The private MIB module definition for CDP protocol." REVISION "200809140000Z" DESCRIPTION "Initial revision." REVISION "201008110000Z" DESCRIPTION "Added rlCdpLogMismatchVoiceVlanEnable, rlCdpLogMismatchNativeVlanEnable" REVISION "201010250000Z" DESCRIPTION "Added rlCdpSecondaryCacheTable. Added maxNeighborsExceededInSecondaryCache. Renamed maxNeighborsExceeded to maxNeighborsExceededInMainCache." REVISION "201011100000Z" DESCRIPTION "Added rlCdpGlobalLogMismatchDuplexEnable. Added rlCdpGlobalLogMismatchVoiceVlanEnable. Added rlCdpGlobalLogMismatchNativeVlanEnable." REVISION "201011140000Z" DESCRIPTION "Added rlCdpTlvTable. Added rlCdpAdvertiseApplianceTlv." REVISION "201101090000Z" DESCRIPTION "Added rlCdpValidateMandatoryTlvs." REVISION "201102150000Z" DESCRIPTION "Added rlCdpLogMismatchDuplexTrap. Added rlCdpLogMismatchVoiceVlanTrap. Added rlCdpLogMismatchNativeVlanTrap." ::= { switch001 137 } RlCdpVersionTypes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "version-v1 - cdp version 1 version-v2 - cdp version 2 " SYNTAX INTEGER { version-v1(1), version-v2(2) } RlCdpCounterTypes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " v1OutputPackets counter specifies the number of sent CDP packets with version 1 v2OutputPackets counter specifies the number of sent CDP packets with version 2 v1InputPackets counter specifies the number of received CDP packets with version 1 v2InputPackets counter specifies the number of received CDP packets with version 2 totalInputPackets counter specifies the total number of received CDP packets totalOutputPackets counter specifies the total number of sent CDP packets illegalChksum counter specifies the number of received CDP packets with illegal checksum. errorPackets counter specifies the number of recieved CDP packets with other error (duplicated TLVs, illegal TLVs, etc.) maxNeighborsExceededInMainCache counter specifies the number of times a CDP neighbor could not be stored in the main cache. maxNeighborsExceededInSecondaryCache specifies counter the number of times a CDP neighbor could not be stored in the secondary cache. " SYNTAX INTEGER { totalInputPackets(1), v1InputPackets(2), v2InputPackets(3), totalOutputPackets(4), v1OutputPackets(5), v2OutputPackets(6), illegalChksum(7), errorPackets(8), maxNeighborsExceededInMainCache(9), maxNeighborsExceededInSecondaryCache(10) } RlCdpPduActionTypes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "filtering - CDP packets would filtered (dropped). bridging - CDP packets bridged as regular data packets " SYNTAX INTEGER { filtering(1), bridging(2), flooding(3) } -- rlCdpVersionAdvertised rlCdpVersionAdvertised OBJECT-TYPE SYNTAX RlCdpVersionTypes MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the verison of sent CDP packets" ::= {rlCdp 1} -- rlCdpSourceInterface rlCdpSourceInterface OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "Specifices the CDP source-interface, which the IP address advertised into TLV is accoding to this source-interface instead of the outgoing interface. value of 0 indicates no source interface. value must belong to an ethernet port/lag " DEFVAL { 0 } ::= { rlCdp 2 } -- rlCdpLogMismatchDuplexEnable rlCdpLogMismatchDuplexEnable OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Enable logging messages when detecting mishmatch between advertised and received duplex mode. To enable loging on specific interface set the corresponing bit." ::= { rlCdp 3 } -- rlCdpCountersTable rlCdpCountersTable OBJECT-TYPE SYNTAX SEQUENCE OF RlCdpCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all CDP counters values, indexed by counter name" ::= { rlCdp 4 } rlCdpCountersEntry OBJECT-TYPE SYNTAX RlCdpCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table." INDEX { rlCdpCountersName } ::= { rlCdpCountersTable 1 } RlCdpCountersEntry ::= SEQUENCE { rlCdpCountersName RlCdpCounterTypes, rlCdpCountersValue Counter32 } rlCdpCountersName OBJECT-TYPE SYNTAX RlCdpCounterTypes MAX-ACCESS not-accessible STATUS current DESCRIPTION "counter name used as key for counters table " ::= {rlCdpCountersEntry 1} rlCdpCountersValue OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "the value of the counter name specisifed by rlCdpCountersName, unsuppo will have no entry in the tab." ::= {rlCdpCountersEntry 2} -- rlCdpCountersClear rlCdpCountersClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "By setting the MIB to True, all error and traffic counters are set to zero." ::= {rlCdp 5} -- rlCdpCacheClear rlCdpCacheClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "By setting the MIB to True, all entries from the cdp cache table is deleted." ::= {rlCdp 6} -- rlCdpVoicevlanId rlCdpVoiceVlanId OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "voice vlan Id, used as the Appliance Vlan-Id TLV" ::= {rlCdp 7} -- Augment to cdpCacheTable rlCdpCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF RlCdpCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table contains externtion for the cdpCache table. indexed by cdpCacheEntry." ::= { rlCdp 8 } rlCdpCacheEntry OBJECT-TYPE SYNTAX RlCdpCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table." AUGMENTS { cdpCacheEntry } ::= { rlCdpCacheTable 1 } RlCdpCacheEntry ::= SEQUENCE { rlCdpCacheVersionExt DisplayString, rlCdpCacheTimeToLive INTEGER, rlCdpCacheCdpVersion RlCdpVersionTypes } rlCdpCacheVersionExt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This field contains the extention of the cdpCacheVersion field in the cdpCache table. In case the neighbour advertised the SW TLV as a string with length larger than 160, this field contains the chacters from place 160 and on. Zero-length strings indicates no Version field (TLV) was reported in the most recent CDP message, or it was smaller than 160 chars " ::= { rlCdpCacheEntry 1 } rlCdpCacheTimeToLive OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This field indicates the time remains in seconds till the entry should be expried. " ::= { rlCdpCacheEntry 2 } rlCdpCacheCdpVersion OBJECT-TYPE SYNTAX RlCdpVersionTypes MAX-ACCESS read-only STATUS current DESCRIPTION "This field indicates the cdp version that was reported in the most recent CDP message." ::= { rlCdpCacheEntry 3 } -- rlCdpPduAction rlCdpPduAction OBJECT-TYPE SYNTAX RlCdpPduActionTypes MAX-ACCESS read-write STATUS current DESCRIPTION "Defines CDP packets handling when CDP is globally disabled." DEFVAL { bridging } ::= {rlCdp 9} -- rlCdpLogMismatchVoiceVlanEnable rlCdpLogMismatchVoiceVlanEnable OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Enable logging messages when detecting mishmatch between advertised and received voice VLAN. To enable logging on specific interface set the corresponing bit." ::= { rlCdp 10 } -- rlCdpLogMismatchNativeVlanEnable rlCdpLogMismatchNativeVlanEnable OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Enable logging messages when detecting mishmatch between advertised and received native VLAN. To enable loging on specific interface set the corresponing bit." ::= { rlCdp 11 } -- rlCdpSecondaryCacheTable rlCdpSecondaryCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF RlCdpSecondaryCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table contains partial information from cdpCache table. indexed by rlCdpSecondaryCacheEntry." ::= { rlCdp 12 } rlCdpSecondaryCacheEntry OBJECT-TYPE SYNTAX RlCdpSecondaryCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the rlCdpSecondaryCacheTable, containing partial information received via CDP on one interface from one device. Entries appear when a CDP advertisement is received from a neighbor device. Entries disappear when CDP is disabled on the interface, globally or when the secondary cache is cleared" INDEX { cdpCacheIfIndex, cdpCacheDeviceIndex } ::= { rlCdpSecondaryCacheTable 1 } RlCdpSecondaryCacheEntry ::= SEQUENCE { rlCdpSecondaryCacheMacAddress MacAddress, rlCdpSecondaryCachePlatform DisplayString, rlCdpSecondaryCacheCapabilities OCTET STRING, rlCdpSecondaryCacheVoiceVlanID Unsigned32, rlCdpSecondaryCacheTimeToLive INTEGER } rlCdpSecondaryCacheMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the neighbor." ::= { rlCdpSecondaryCacheEntry 3 } rlCdpSecondaryCachePlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Device's Hardware Platform prefix, as reported in the most recent CDP message. The zero-length string indicates that no Platform field (TLV) was reported in the most recent CDP message." ::= { rlCdpSecondaryCacheEntry 4 } rlCdpSecondaryCacheCapabilities OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Device's Functional Capabilities as reported in the most recent CDP message." ::= { rlCdpSecondaryCacheEntry 5 } rlCdpSecondaryCacheVoiceVlanID OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The remote device's VoIP VLAN ID, as reported in the most recent CDP message. This object is not instantiated if no Appliance VLAN-ID field (TLV) was reported in the most recently received CDP message." ::= { rlCdpSecondaryCacheEntry 6 } rlCdpSecondaryCacheTimeToLive OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This field indicates the number of seconds till the entry is expried. " ::= { rlCdpSecondaryCacheEntry 7 } rlCdpGlobalLogMismatchDuplexEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Globally enable/disable logging messages when detecting mishmatch between advertised and received duplex mode." DEFVAL { true } ::= { rlCdp 13 } rlCdpGlobalLogMismatchVoiceVlanEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Globally enable/disable logging messages when detecting mishmatch between advertised and received voice VLAN." DEFVAL { true } ::= { rlCdp 14 } rlCdpGlobalLogMismatchNativeVlanEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Globally enable/disable logging messages when detecting mishmatch between advertised and received native VLAN." DEFVAL { true } ::= { rlCdp 15 } -- rlCdpTlvTable rlCdpTlvTable OBJECT-TYPE SYNTAX SEQUENCE OF RlCdpTlvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table contains the local advertised information. indexed by rlCdpTlvEntry." ::= { rlCdp 16 } rlCdpTlvEntry OBJECT-TYPE SYNTAX RlCdpTlvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the rlCdpTlvTable, containing local information advertised by CDP on one interface. Entries are available only when CDP is globally enabled, for interfaces on which CDP is enabled and the interface state is UP." INDEX { rlCdpTlvIfIndex } ::= { rlCdpTlvTable 1 } RlCdpTlvEntry ::= SEQUENCE { rlCdpTlvIfIndex Unsigned32, rlCdpTlvDeviceIdFormat INTEGER, rlCdpTlvDeviceId DisplayString, rlCdpTlvAddress1Type InetAddressType, rlCdpTlvAddress1 InetAddress, rlCdpTlvAddress2Type InetAddressType, rlCdpTlvAddress2 InetAddress, rlCdpTlvAddress3Type InetAddressType, rlCdpTlvAddress3 InetAddress, rlCdpTlvPortId DisplayString, rlCdpTlvCapabilities OCTET STRING, rlCdpTlvVersion DisplayString, rlCdpTlvPlatform DisplayString, rlCdpTlvNativeVLAN Unsigned32, rlCdpTlvDuplex INTEGER, rlCdpTlvApplianceID Unsigned32, rlCdpTlvApplianceVlanID Unsigned32, rlCdpTlvExtendedTrust INTEGER, rlCdpTlvCosForUntrustedPorts Unsigned32, rlCdpTlvPowerAvailableRequestId Unsigned32, rlCdpTlvPowerAvailablePowerManagementId Unsigned32, rlCdpTlvPowerAvailable Unsigned32, rlCdpTlvPowerAvailableManagementPowerLevel Unsigned32 } rlCdpTlvIfIndex OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the local interface. A value of zero is used to access TLVs which do not changed between interfaces." ::= { rlCdpTlvEntry 1 } rlCdpTlvDeviceIdFormat OBJECT-TYPE SYNTAX INTEGER { serialNumber(1), macAddress(2), other(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of the format of Device-Id contained in the corresponding instance of rlCdpTlvDeviceId. serialNumber(1) indicates that the value of rlCdpTlvDeviceId object is in the form of an ASCII string contain the device serial number. macAddress(2) indicates that the value of rlCdpTlvDeviceId object is in the form of Layer 2 MAC address. other(3) indicates that the value of rlCdpTlvDeviceId object is in the form of a platform specific ASCII string contain info that identifies the device. For example: ASCII string contains serialNumber appended/prepened with system name." ::= { rlCdpTlvEntry 2 } rlCdpTlvDeviceId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Device-ID string as will be advertised in subsequent CDP messages." ::= { rlCdpTlvEntry 3 } rlCdpTlvAddress1Type OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The Inet address type of rlCdpTlvAddress1" ::= { rlCdpTlvEntry 4 } rlCdpTlvAddress1 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The (first) network-layer address of the device as will be advertised in the Address TLV of subsequent CDP messages. For example, if the corresponding instance of rlCdpTlvAddress1Type had the value 'ipv4(1)', then this object would be an IPv4-address." ::= { rlCdpTlvEntry 5 } rlCdpTlvAddress2Type OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The Inet address type of rlCdpTlvAddress2" ::= { rlCdpTlvEntry 6 } rlCdpTlvAddress2 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The (first) network-layer address of the device as will be advertised in the Address TLV of subsequent CDP messages. For example, if the corresponding instance of rlCdpTlvAddress2Type had the value 'ipv6(2)', then this object would be an IPv6-address." ::= { rlCdpTlvEntry 7 } rlCdpTlvAddress3Type OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The Inet address type of rlCdpTlvAddress3" ::= { rlCdpTlvEntry 8 } rlCdpTlvAddress3 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The (first) network-layer address of the device as will be advertised in the Address TLV of subsequent CDP messages. For example, if the corresponding instance of rlCdpTlvAddress3Type had the value 'ipv6(2)', then this object would be an IPv6-address." ::= { rlCdpTlvEntry 9 } rlCdpTlvPortId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Port-ID string as will be advertised in subsequent CDP messages from this interface. This will typically be the value of the ifName object (e.g., 'Ethernet0')." ::= { rlCdpTlvEntry 10 } rlCdpTlvCapabilities OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Device's Functional Capabilities as will be advertised in subsequent CDP messages. For latest set of specific values, see the latest version of the CDP specification." REFERENCE "Cisco Discovery Protocol Specification, 10/19/94." ::= { rlCdpTlvEntry 11 } rlCdpTlvVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Version string as will be advertised in subsequent CDP messages." ::= { rlCdpTlvEntry 12 } rlCdpTlvPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Device's Hardware Platform as will be advertised in subsequent CDP messages." ::= { rlCdpTlvEntry 13 } rlCdpTlvNativeVLAN OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The local device's interface's native VLAN, as will be advertised in subsequent CDP messages." ::= { rlCdpTlvEntry 14 } rlCdpTlvDuplex OBJECT-TYPE SYNTAX INTEGER { unknown(1), halfduplex(2), fullduplex(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The local device's interface's duplex mode, as will be advertised in subsequent CDP messages." ::= { rlCdpTlvEntry 15 } rlCdpTlvApplianceID OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The local device's Appliance ID, as will be advertised in subsequent CDP messages. A value of zero denotes no Appliance VLAN-ID TLV will be advertised in subsequent CDP messages." ::= { rlCdpTlvEntry 16 } rlCdpTlvApplianceVlanID OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The local device's VoIP VLAN ID, as will be advertised in subsequent CDP messages. A value of zero denotes no Appliance VLAN-ID TLV will be advertised in subsequent CDP messages." ::= { rlCdpTlvEntry 17 } rlCdpTlvExtendedTrust OBJECT-TYPE SYNTAX INTEGER { untrusted(0), trusted(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The local device's interface's extended trust mode, as will be advertised in subsequent CDP messages. A value of zero indicates the absence of extended trust." ::= { rlCdpTlvEntry 18 } rlCdpTlvCosForUntrustedPorts OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The COS value with which all packets received on an untrusted port should be marked by a simple switching device which cannot itself classify individual packets. This TLV only has any meaning if corresponding instance of rlCdpTlvExtendedTrust indicates the absence of extended trust." ::= { rlCdpTlvEntry 19 } rlCdpTlvPowerAvailableRequestId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Power Available TLV Request-ID field echoes the Request-ID field last received in a Power Requested TLV. It is 0 if no Power Requested TLV has been received since the interface last transitioned to ifOperState == Up." ::= { rlCdpTlvEntry 20 } rlCdpTlvPowerAvailablePowerManagementId OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Power Available TLV Power-Management-ID field." ::= { rlCdpTlvEntry 21 } rlCdpTlvPowerAvailable OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Power Available TLV Available-Power field indicates the number of milliwatts of power available to powered devices at the time this object is instatiated." ::= { rlCdpTlvEntry 22 } rlCdpTlvPowerAvailableManagementPowerLevel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Power Available TLV Management-Power-Level field indicates the number of milliwatts representing the supplier's request to the powered device for its Power Consumption TLV. A value of 0xFFFFFFFF indicates the local device has no preference." ::= { rlCdpTlvEntry 23 } rlCdpAdvertiseApplianceTlv OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "By setting the MIB to True Appliance VLAN-ID TLV may be advertised. A value of False will prevent this TLV from being advertised." DEFVAL { true } ::= {rlCdp 17} rlCdpValidateMandatoryTlvs OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "By setting the MIB to true all mandatory TLVs 0x0001-0x0006 will be validated. Incoming CDP frames without any of the TLVs will be dropped. A value of false indicates that only the Device ID TLV (0x0001) is mandatory. Frames containing Device ID TLV will be processed, regardless of whether other TLVs are present or not." DEFVAL { false } ::= {rlCdp 18} -- rlCdpInterfaceCountersPTable rlCdpInterfaceCountersTable OBJECT-TYPE SYNTAX SEQUENCE OF RlCdpInterfaceCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all CDP counters values, indexed by counter name" ::= { rlCdp 19 } rlCdpInterfaceCountersEntry OBJECT-TYPE SYNTAX RlCdpInterfaceCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table." INDEX { rlCdpInterfaceId, rlCdpInterfaceCountersName } ::= { rlCdpInterfaceCountersTable 1 } RlCdpInterfaceCountersEntry ::= SEQUENCE { rlCdpInterfaceId InterfaceIndex, rlCdpInterfaceCountersName RlCdpCounterTypes, rlCdpInterfaceCountersValue Counter32 } rlCdpInterfaceId OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index, used as primary index for interface counters table." ::= {rlCdpInterfaceCountersEntry 1} rlCdpInterfaceCountersName OBJECT-TYPE SYNTAX RlCdpCounterTypes MAX-ACCESS not-accessible STATUS current DESCRIPTION "counter name used as secondary key for interface counters table. " ::= {rlCdpInterfaceCountersEntry 2} rlCdpInterfaceCountersValue OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "the value of the counter name specified by rlCdpCountersName, and rlCdpInterfaceId" ::= {rlCdpInterfaceCountersEntry 3} rlCdpInterfaceCountersClear OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "By setting the scalar to a interface id , all error and traffic counters of this interface are set to zero. To clear the counters for ALL interfaces set the scalar to 0x0FFFFFFF" ::= {rlCdp 20} -------------------------------------------------------------------------------- -- TRAPS -------------------------------------------------------------------------------- rlCdpLogMismatchDuplexTrap NOTIFICATION-TYPE OBJECTS { rndErrorDesc, rndErrorSeverity } STATUS current DESCRIPTION "Warning trap indicating that duplex mismatch has been detected by CDP" ::= { rndNotifications 224 } rlCdpLogMismatchVoiceVlanTrap NOTIFICATION-TYPE OBJECTS { rndErrorDesc, rndErrorSeverity } STATUS current DESCRIPTION "Warning trap indicating that voice vlan mismatch has been detected by CDP" ::= { rndNotifications 225 } rlCdpLogMismatchNativeVlanTrap NOTIFICATION-TYPE OBJECTS { rndErrorDesc, rndErrorSeverity } STATUS current DESCRIPTION "Warning trap indicating that native vlan mismatch has been detected by CDP" ::= { rndNotifications 226 } END